Check & ShuttleThe Specifier’s Catalogue
Stop & Metering
10/14 The Specifier’s Catalogue
Welcome to BiS Valves
BiS is an internationally recognised company with over 40 years experience in the design and manufacture of a wide
range of small bore stainless steel pressure and flow control valves for high pressure liquid and gas.
Operating in a variety of sectors, we are a leading supplier to the Offshore Oil and Gas industry for topside, subsea and
downhole applications where quality, reliability and safety are critical.
With an extensive range of standard products and a bespoke design service we aim to provide the right solutions for
your applications.
Markets Technology
BiS has a strong profile and presence in the international offshore Alongside our large range of standard products, BiS has the
oil and gas market in both topside and subsea applications. capability to design and manufacture the special product that
Products are designed mainly for the low flow, high pressure control is the perfect fit for your system.
valve market where demands for higher pressures and total
reliability in the most extreme environments constantly push Using our experience of fluids, materials and seals, our team of
design boundaries. Working with materials from stainless steel to hydraulics engineers use computer aided design tools to develop
the more exotic, such as inconel or titanium, we pride ourselves the right solutions. Designs can be qualified for use via in-house
on finding the right solution, whatever the application. test facilities which can include flow, pressure, environmental and
hyperbaric testing, and special testing through external facilities
As a supplier to the oil and gas topside market, our products are when required.
widely specified for use on a range of applications including
hydraulic power units, work over control systems and chemical Customer Care
injection systems. As a solution provider, BiS also designs,
manufactures and supplies complete integrated manifolds to In a competitive market place we recognise the importance of
meet our customers’ specific requirements. customer care, whether your requirement is for a single valve
from our standard range, large quantities of multiple products
BiS Valves also has extensive experience providing products for for a specific project, or for a bespoke design. Our team
subsea and downhole applications such as wellhead control, constantly strive to provide customers with a prompt, efficient
emergency shut-down and remotely operated vehicles. Our service, competitive lead times, on-time deliveries, and products
strong design team backed up with the latest test equipment designed, manufactured, assembled and tested in accordance
is well suited to development of the bespoke products often with strict quality control procedures.
required for subsea applications.
We enjoy a reputation for short lead times and our flexible
Our standard, cartridge and manifold mounted flow and pressure manufacturing methods give us the capability to respond to your
control products are also suited to and specified in a wide range most urgent requirements.
of industries, including water hydraulics, fuel distribution, metal
manufacturing, industrial gas control and process control.
VALVES 10/14
The Specifier’s Catalogue
SOLENOID
FLOW
CONTROL
Using This Catalogue 3 PORT
DIRECTIONAL
The data sheets in this catalogue are intended to provide the information necessary to specify product model numbers for the
majority of applications. However, at BiS Valves we understand that every application is different and our team are always CONTROL
available to assist with product selection. The data sheets should always be read in conjunction with the Application Notes
contained in this catalogue. 4 PORT
DIRECTIONAL
Cannot see the product you need?
CONTROL
Our current standard range features a large number of carefully selected products but does not represent all the products
available from BiS Valves. If there is an item that is not shown in this catalogue, please e-mail or call our Sales team and we will CHECK
do our utmost to help you. AND
Contact Us SHUTTLE
Telephone +44 (0)1202 896322 PILOT
OPERATED
We are here to provide you with advice and support. Simply call us on +44 (0)1202 896322 and be directed
to our Sales department. Orders can be placed from 8:00am to 5:00pm Monday to Thursday and 8:00am CHECK
to 4:00pm Fridays.
RELIEF
Fax +44 (0)1202 896718
EXCESS
Send your purchase order or quote request by fax 24 hours a day, 7 days a week FLOW
E-mail [email protected]
To place an order, request a quotation or to ask a question, why not e-mail?
Online www.bisvalves.co.uk
View the latest product range on our website, request a quotation or ask a question
Post BiS Valves Ltd.
Units 17-23 Kingfisher Park, Collingwood Road, West Moors, Wimborne, Dorset, BH21 6US, UK
Based in strategic locations around the world with local expertise and stocks of the most popular products, FILTERS
our Global Partners are ready to take your call.
Global
Visit our website to find your local partner.
Partners
Important Notes
1. Full terms and conditions of sale are included at the back of the catalogue. PRESSURE
SENSING
2. Every effort has been made to ensure that the contents of this catalogue are accurate. No liability will be accepted by
BiS Valves for any errors or omissions. PUMPS
3. BiS Valves operate a policy of continuous improvement and reserves the right to modify any part of the design of its products ACTUATORS
without prior notice.
4. For any piece of equipment where specifications or dimensions are considered critical, it is recommended to contact our
Technical Department for the latest details.
5. The products should be installed and used by qualified personnel familiar with the risks associated with pressure equipment and in
compliance with the local regulations in force, and any installation, operation and maintenance instructions supplied with the product.
6. BiS Valves will offer all possible assistance to ensure correct product selection, but it is the ultimate responsibility of the
customer to ensure that the final product selection is suitable for the intended application.
Catalogue also available on digital media VALVES Page 2 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
Introduction
BiS Valves offer an extensive range of check and shuttle valve products, in cartridge, manifold mounted and ported installation formats.
Check Valves
Check valves, sometimes known as non-return valves, NRV’s or one-way valves allow flow in one direction, and block flow from
returning. Nearly all hydraulic and pneumatic circuits contain check valves as a critical part of the functionality. Typical applications
include prevention of back flow into pumps, accumulator unloading systems, and the prevention of undesirable actuator movements
when directional valves are operated.
Typical Uses
SUPPLY SERVICES
Check valve prevents filled accumulator discharging when supply is unloaded. SUPPLY
RETURN
Venting Check Valves Check valves prevent unintended actuator movements during transient
pressure spikes or drops in supply and return lines.
Venting check valves have a single threaded connection and are
often used to allow fluid out of a system. They are used topside in Typical Uses
venting applications and find many uses in subsea pressure SUBSEA
compensation applications. PRESSURE
VESSEL
Yield Valves
Venting check valve maintains a small positive pressure differential
Yield valves are essentially check valves with an integral reverse inside the vessel during a raising operation.
relief function, intended to provide thermal relief for small trapped
volumes of fluid. A typical example would be the supply line to a Typical Uses
directional control valve, where increased pressure due to
thermal expansion could overpressurise the directional valve.
Shuttle Valves Where pressure is trapped between the check valve and the directional
valve or actuator, the integral relief function in a yeld valve can limit
pressure increase due to thermal expansion of the trapped volume.
Shuttle valves are used to automatically select the higher of two input pressures. They are commonly used to combine dual redundant
supply lines, emergency hydraulic power sources and for brake release applications when driving hydraulic motors.
Typical Uses
PILOT 1
PILOT 2 Shuttle valve delivers a brake release signal to bi-directional motors.
Two pilot supplies are combined via a shuttle valve such that if one pilot supply fails,
the other pilot supply can still operate the directional valve.
VALVES 10/14
The Specifier’s Catalogue
Check and Shuttle SOLENOID
Overview
Selecting the Correct Product FLOW
Selection guide for check valves CONTROL
3 PORT
Page Suitable Suitable 1/4” – 3/8” > 1” BSP/ Medium Cartridge Manifold DIRECTIONAL
for liquids for gases BSP / NPT NPT ports pressure installation mount
ports ports installation CONTROL
1/2” – 1” Venting
BSP/NPT check 4 PORT
ports valve DIRECTIONAL
Thermal
relief CONTROL
function
C25 5 ✓✓✓
C37 6 ✓✓✓
C50 7 ✓✓ ✓
C75 8 ✓✓ ✓
C100 9 ✓✓ ✓ CHECK
AND
C125 10 ✓ ✓ ✓
SHUTTLE
C150 11 ✓ ✓ ✓
NR25 12 ✓ ✓ ✓ ✓ PILOT
OPERATED
NR25 (20K) 13 ✓ ✓ ✓
CHECK
NR37 14 ✓ ✓ ✓
NR50 15 ✓ ✓ ✓ ✓
NR50 (20K) 16 ✓ ✓ ✓
NR50M 17 ✓ ✓ ✓ RELIEF
NR75 18 ✓ ✓ ✓
NR100 19 ✓ ✓ ✓
NR200 20 ✓ ✓ ✓
CC25 21 ✓ ✓ ✓ EXCESS
FLOW
CC37 22 ✓ ✓ ✓
CC50 23 ✓ ✓ ✓
CC75 24 ✓ ✓ ✓
CC100 25 ✓ ✓ ✓ FILTERS
CV25 26 ✓ ✓ ✓ ✓
YV25 27 ✓ ✓ ✓
Important – This is a guide to selecting products that may be suitable. The valve data sheet and application notes must be thoroughly PRESSURE
reviewed prior to final selection. Please contact us if the options you require are not shown SENSING
Selection guide for shuttle valves
Suitable 1/2” – 1” Cartridge
for ports installation
liquids
Suitable
for
gases
1/4” – 3/8”
ports
Page PUMPS
SV25 28 ✓ ✓
SV25C 29 ✓ ✓ ACTUATORS
SV50 30 ✓ ✓ ✓
Important – This is a guide to selecting products that may be suitable. The valve data sheet and application notes must be thoroughly
reviewed prior to final selection. Please contact us if the options you require are not shown
Catalogue also available on digital media VALVES Page 3 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
Application Notes
Intended Use
The products in this catalogue have many potential applications and are used across a wide variety of industries. They are primarily
intended for use in industrial and onshore and offshore topside applications. Products should always be used within the parameters
specified on the product data sheet, and should be installed, operated and maintained in accordance with the instructions supplied.
BiS Valves will offer all possible assistance to ensure correct product selection, but it is the ultimate responsibility of the customer to
ensure that the final product selection is suitable for the intended application.
Prohibited Uses
The products in this catalogue are not intended for use in automotive, shipbuilding, aerospace, military or nuclear applications. The
products are not designed for contact with foodstuffs. Use with oxygen or with oxygen rich gas mixes is prohibited. Please contact BiS
Valves prior to ordering products for use in any of the above applications.
Subsea Applications
Suitability for subsea applications should not be assumed unless it is specifically stated on the product data sheet. In many cases BiS
Valves have subsea variants of standard catalogue products available, or can design bespoke subsea variants specifically for your
application. Please do not hesitate to contact BiS Valves with your requirement.
Where the product data sheet states suitability for short term subsea use, this should be interpreted as meaning that the product is
capable of functioning subsea but that corrosion will occur over time. The acceptable length of deployment will depend on the
specific subsea environment and the effect of that environment on the exposed materials of construction, which should be evaluated
by the customer.
Where the product data sheet states suitability for subsea use, this should be interpreted as meaning that the product is capable of
functioning subsea and that the externally exposed materials of construction will withstand longer term subsea use. The acceptable
length of deployment will depend on the specific subsea environment and the effect of that environment on the exposed materials of
construction, which should be evaluated by the customer. It is recommended that BiS Valves are consulted where deployment is
intended to exceed five years without retrieval and refurbishment and for deployment depths greater than 3,000 metres. For all long
term deployments, it is recommended that the system is designed such that failure of a single component does not cause failure of
critical system functions.
For subsea applications, take care to choose an appropriate subsea suitable piping system. BiS Valves recommend that particular care
is taken if selecting BSP ported products for subsea use.
Cleanliness
Fluid cleanliness is critical to the reliability of all fluid power products. BiS Valves take every precaution to ensure that products are clean
at the time of supply. Component parts are cleaned prior to assembly and testing is carried out with test fluids verified as clean to a
maximum of AS4059 class 6B-F.
For maximum service life it is recommended that the products are used with fluid maintained at or below AS4059 class 6B-F. Use with
higher levels of contaminant should be expected to result in a reduction in service life. Certain product designs are inherently more
robust in systems where fluid cleanliness cannot be guaranteed, and it is recommended to contact BiS Valves prior to ordering products
for use in such applications.
There is an increased risk of damage to the product at the time of installation, due to contaminant generated during the assembly of
the system and associated pipework. Precautions should be taken to ensure that contaminant is not transferred into the product during
flushing procedures and initial system operations.
Where fluid contamination presents a risk of failure to critical valve functions, it is recommended to consider fitting a device protection
filter from the BiS Valves F or EF ranges. However, this should not be considered as being a substitute for sound hydraulic cleanliness
practise.
Product Testing
All products are tested for proof pressure integrity, typically at 1.5 times the working pressure, and are tested to ensure correct
functionality as part of our standard manufacturing process. Testing will be carried out using an appropriate test fluid that suits the
specific product being tested. The test fluid used will be referenced on the test certificate supplied with the product. In cases where
the test fluid used is not compatible with the media in the system into which the product will be installed, the customer may need to
flush the product prior to installation. If the product to be supplied must be tested using a specific fluid, please ensure that this is
requested prior to quotation and ordering.
Leakage
BiS Valves products are typically designed to provide the very low leakage levels expected by the offshore oil and gas industry, other
than certain products such as flow control valves that are not intended to fully close. The actual leakage rate achieved will depend
on various factors, such as fluid viscosity and pressure differential, but with liquids is expected to be below a level where it is appropriate
to measure by collecting a fluid volume or counting drops, hence a pressure decay and trapped volume method of leakage detection
is used. If the product to be supplied must be tested to prove a specific leakage rate, please ensure that this is requested prior to
quotation and ordering, such that the suitability of the product and the standard test procedure may be assessed.
VALVES 10/14
The Specifier’s Catalogue
Check and Shuttle SOLENOID
Overview
Materials FLOW
CONTROL
Each product data sheet gives limited guidance relating to the generic type of operating media with which the product is suitable,
and the materials of construction. As part of our quotation and order process, BiS Valves will supply an Application Data Request 3 PORT
form and from the data supplied will give all possible assistance to ensure correct product selection. However, since it is not possible DIRECTIONAL
for BiS Valves to validate products against every conceivable operating parameter, it is essential that the customer satisfies themselves
that the product is suitable for their specific application prior to purchase and use. CONTROL
Alternative construction materials, including exotics, can often be made available on request.
4 PORT
Seals DIRECTIONAL
Each product data sheet contains model code options for various seal materials that are available as preferred options. Many other CONTROL
seal materials and grades are available. Please contact us for a quotation.
Where generic standard materials are specified (eg. Viton®, nitrile, etc), the exact grade of material cannot normally be guaranteed. CHECK
If you require a specific grade of seal material, please specify when requesting a quotation. AND
When choosing or specifying a seal material, always ensure that the material is suitable for the application in terms of both temperature
and chemical compatibility. Always seek advice from the fluid manufacturer if in doubt with regards to material compatibility. Never SHUTTLE
specify Ethylene Propylene seals for use with mineral oils or other hydrocarbon based media.
Viton® and Kalrez® are registered trademarks of E.I. du Pont de Nemours and company or its affiliates. BiS Valves use genuine Viton® PILOT
and Kalrez® . OPERATED
Pressure Equipment Directive 97/23/EC CHECK
The products in this catalogue are classified as Pressure Accessories in terms of the definitions within the Pressure Equipment Directive. RELIEF
Since the products fall below sizes specified within the Directive, the products fall outside categories I to IV, and hence are engineered
in accordance with “sound engineering practise” and are not supplied with a CE mark. EXCESS
FLOW
ATEX Directive 94/9/EC
FILTERS
The majority of products supplied by BiS Valves can be used in hazardous areas containing potentially explosive atmospheres
covered by the ATEX and DSEAR regulations, for zones 1 and 2. As standard, products are not CE marked and should not be used in PRESSURE
these environments. However, should use in these areas be required, please ensure that the requirement is specified, along with the SENSING
zone in which the equipment is to be used, when requesting a quotation or ordering. Following assessment, the products can
normally be supplied with a CE mark and declaration of conformity at no extra charge. PUMPS
NACE MR01-75 ACTUATORS
Many products supplied by BiS Valves can be configured for use in sour H2S containing environments. This often requires some material
changes from the standard product. Where compliance with NACE MR01-75 is required, please specify when requesting a quotation.
Traceability
Unless otherwise requested, only the main pressure containing component in finished products are traceable back to original material.
Should either full or a greater level of traceability be required, please ensure that this is specified when requesting a quotation.
Documentation
Standard documentation supplied with BiS Valves products includes a pressure test / conformity certificate, parts list (including
available spare parts), assembly drawing, installation, operation and maintenance instructions, and a material certificate for the
main pressure containing component, along with any EC conformity declarations appropriate to the product. If further documentation
is required, please specify when requesting a quotation. Documenation is delivered as a hard copy with the goods. If electronic
documentation is required, please specify when ordering.
Maintenance
Due to the wide variety of applications in which BiS Valves products are utilised, it is impossible to set generic service intervals. It is
recommended that the end user should assess their application, including factors such as duty cycle, hostility of the environment
both inside and outside the product, and the criticality and consequence of failure, and set in place a preventative maintenance
schedule accordingly. It is further recommended that performance is monitored and reviewed to refine the balance between
reliability and cost.
It is recommended that products are returned for repair and refurbishment by BiS Valves. However, it is acknowledged that this may
not always be possible, and Seal Kits and Repair Kits are available for most BiS Valves products. Product maintenance should only be
carried out following safe isolation from the system, in clean conditions, by competent personnel, and fully in accordance with the
maintenance instructions supplied.
Warranty
BiS Valves warrants that for a period of 12 months from the date of first use or for a period of 24 months from date of delivery
(whichever expires first) the product shall be free from material defects in design, material and workmanship. Should it be necessary
to return a product, please contact the BiS Valves sales team in advance. This is of additional importance if the goods are being
returned to the UK from non EU countries, to allow BiS to ensure compliance with the relevant UK customs procedures. Failure to
comply can result in a demand for payment of Customs Duties which BiS may have to pass on to the customer.
Catalogue also available on digital media VALVES Page 4 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
1/4” C25
CHECK VALVE
UP TO 621 BAR 9,000 PSI
The C25 is a 1/4” nominal bore INLET
check valve. It will allow flow OUTLET
in one direction, and blocks
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Cost effective one piece body design
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils and water glycols
l Various seal options available
l Various porting options available
Specifications C25 Materials
BASIC MODEL
NUMBER SECTION B-B
SYMBOL INLET OUTLET Externally Exposed Parts: 316 stainless steel.
Internally Wetted Parts: 316, 302 and 420 stainless steel and acetal.
The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil and water glycols and may also be used
with a wide variety of media compatible with the materials of
construction.
MAX WORKING 621 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (9,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 241 bar working fluid at the operating temperature must be considered.
(3,500 psi)
CV (FLOW CAPACITY) Typical Performance
0.7
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
PORT SIZE 1/4” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 10 20 30 40 50
WEIGHT (2.6) (5.3) (7.9) (10.6) (13.2)
0.1 kg Flow - l/min (USgpm)
Specifications may change without notice (0.2 lb)
TypTicyaplicpaelrpfoermrfoarmncaenbceasbeadseodn wonatwear gtelyrcol
VALVES 10/14
Installation Diagram SOLENOID
19.1mm A/F 54.4mm FLOW
[0.75in] 2.14in CONTROL
3 PORT
DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
INLET OUTLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
C25 P - NBR - 9K
VALVE PORTING SEAL MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
C25 P Leave blank for Viton® seals FILTERS
-10˚C to +120˚C 9K
1/4” BSPP female PRESSURE
NBR 621 bar SENSING
N (9,000 psi)
Nitrile seals
1/4” NPT female -30˚C to +105˚C Liquid
EP 241 bar
(3,500 psi)
EPDM seals
-45˚C to +120˚C Gas
KLZ PUMPS
Repair and seal kits are available Kalrez® seals ACTUATORS
on request -25˚C to +120˚C
For a seal kit add SK at the end of the HNBR
model code and for a repair kit add RK
Hydrogenated
Nitrile seals
-20˚C to +120˚C
Further seal options are available
on request
Catalogue also available on digital media VALVES Page 5 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
3/8” C37
CHECK VALVE
UP TO 621 BAR 9,000 PSI
The C37 is a 3/8” nominal bore INLET
check valve. It will allow flow OUTLET
in one direction, and blocks
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Cost effective one piece body design
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils and water glycols
l Various seal options available
l Various porting options available
Specifications C37 Materials
BASIC MODEL
NUMBER Externally Exposed Parts: 316 stainless steel.
SYMBOL INLET OUTLET Internally Wetted PSaErtsC: 3T1I6O, 30N2 aAnd-A420 stainless steel and acetal.
The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil and water glycols and may also be used
with a wide variety of media compatible with the materials of
construction.
MAX WORKING 621 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (9,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 241 bar working fluid at the operating temperature must be considered.
(3,500 psi)
CV (FLOW CAPACITY) Typical Performance
1.3
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
PORT SIZE 3/8” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 20 40 60 80 100
WEIGHT (5.3) (10.6) (15.9) (21.1) (26.4)
0.15 kg Flow - l/min (USgpm)
Specifications may change without notice (0.3 lb)
TypTicyaplicpaelrpfoermrfoarmncaenbceasbeadseodn wonatwear gtelyr col
VALVES 10/14
Installation Diagram SOLENOID
22.2mm A/F 61.7mm FLOW
[0.875in] 2.43in CONTROL
3 PORT
DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
INLET OUTLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
C37 P - NBR - 9K
VALVE PORTING SEAL MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
C37 P Leave blank for Viton® seals FILTERS
-10˚C to +120˚C 9K
3/8” BSPP female PRESSURE
NBR 621 bar SENSING
N (9,000 psi)
Nitrile seals
3/8” NPT female -30˚C to +105˚C Liquid
EP 241 bar
(3,500 psi)
EPDM seals
-45˚C to +120˚C Gas
KLZ PUMPS
Repair and seal kits are available Kalrez® seals ACTUATORS
on request -25˚C to +120˚C
For a seal kit add SK at the end of the HNBR
model code and for a repair kit add RK
Hydrogenated
Nitrile seals
-20˚C to +120˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 6 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
1/2” C50 INLET
OUTLET
CHECK VALVE
UP TO 621 BAR 9,000 PSI
The C50 is a 1/2” nominal bore
check valve. It will allow flow
in one direction, and blocks
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Cost effective one piece body design
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols and plain water
l Various seal options available
l Various porting options available
Specifications C50 Materials
BASIC MODEL
NUMBER Externally Exposed ParStsE: C316TIsOtaiNnlesEs-sEteel.
SYMBOL INLET OUTLET Internally Wetted Parts: 316 and 302 stainless steel and acetal.
The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water and may
also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 621 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (9,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 241 bar working fluid at the operating temperature must be considered.
(3,500 psi)
CV (FLOW CAPACITY) Typical Performance
2.2
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
PORT SIZE 1/2” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 25 50 75 100 125 150
WEIGHT (6.6) (13.2) (19.8) (26.4) (33.0) (39.6)
0.3 kg Flow - l/min (USgpm)
Specifications may change without notice (0.7 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
27.9mm A/F 73.4mm FLOW
[1.10in] 2.89in CONTROL
3 PORT
DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
INLET OUTLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
C50 P - NBR - 9K
VALVE PORTING SEAL MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
C50 P Leave blank for Viton® seals FILTERS
-10˚C to +120˚C 9K
1/2” BSPP female PRESSURE
NBR 621 bar SENSING
N (9,000 psi)
Nitrile seals
1/2” NPT female -30˚C to +105˚C Liquid
EP 241 bar
(3,500 psi)
EPDM seals
-45˚C to +120˚C Gas
KLZ PUMPS
Repair and seal kits are available Kalrez® seals ACTUATORS
on request -25˚C to +120˚C
For a seal kit add SK at the end of the HNBR
model code and for a repair kit add RK
Hydrogenated
Nitrile seals
-20˚C to +120˚C
Further seal options are available
on request
Catalogue also available on digital media VALVES Page 7 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
3/4” C75 INLET
OUTLET
CHECK VALVE
UP TO 621 BAR 9,000 PSI
The C75 is a 3/4” nominal bore
check valve. It will allow flow
in one direction, and blocks
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Cost effective one piece body design
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols and plain water
l Various seal options available
l Various porting options available
Specifications C75 Materials
BASIC MODEL
NUMBER Externally Exposed Parts: 316 stainless steel.
SYMBOL INLET OUTLET Internally Wetted Parts: 316 and 302 stainless steel and acetal.
The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water and may
also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 621 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (9,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 241 bar working fluid at the operating temperature must be considered.
(3,500 psi)
CV (FLOW CAPACITY) Typical Performance
3.5
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
PORT SIZE 3/4” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 50 100 150 200 250
WEIGHT (13.2) (26.4) (39.6) (52.8) (66.1)
0.6 kg Flow - l/min (USgpm)
Specifications may change without notice (1.3 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram 80.0mm SOLENOID
3.15in
37.6mm A/F
[1.48in]
FLOW
CONTROL
3 PORT
DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
INLET OUTLET PILOT
OPERATED
CHECK
Product Selector RELIEF
C75 P - NBR - 9K
VALVE PORTING SEAL MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
C75 P Leave blank for Viton® seals FILTERS
-10˚C to +120˚C 9K
3/4” BSPP female PRESSURE
NBR 621 bar SENSING
N (9,000 psi)
Nitrile seals
3/4” NPT female -30˚C to +105˚C Liquid
EP 241 bar
(3,500 psi)
EPDM seals
-45˚C to +120˚C Gas
KLZ PUMPS
Repair and seal kits are available Kalrez® seals ACTUATORS
on request -25˚C to +120˚C
For a seal kit add SK at the end of the HNBR
model code and for a repair kit add RK
Hydrogenated
Nitrile seals
-20˚C to +120˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 8 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
C100 INLET
OUTLET
CHECK VALVE
1” UP TO 621 BAR 9,000 PSI
B B
The C100 is a 1” nominal bore
check valve. It will allow flow
in one direction, and blocks
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Cost effective one piece body design
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols and plain water
l Various seal options available
l Various porting options available
Specifications C100 Materials
BASIC MODEL
NUMBER Externally Exposed Parts: 316 stainless steel.
SYMBOL INLET OUTLET Internally Wetted Parts: 316 and 302 stainless steel and acetal.
The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water and may
also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 621 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (9,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 241 bar working fluid at the operating temperature must be considered.
(3,500 psi)
CV (FLOW CAPACITY) Typical Performance
5.7
SECTION B-B
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi) 15
TEMPERATURE RANGE (218)
See materials section
10
See Product Selector opposite (145)
and Technical Data section
PORT SIZE 1” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 50 100 150 200 250 300 350 400
WEIGHT (13.2) (26.4) (39.6) (52.8) (66.1) (79.3) (92.5) (105.7)
0.8 kg Flow - l/min (USgpm)
Specifications may change without notice (1.8 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram 91.4mm SOLENOID
3.60in
44.5mm A/F
[1.75in]
FLOW
CONTROL
3 PORT
DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
INLET OUTLET PILOT
OPERATED
CHECK
Product Selector RELIEF
VALVE C100 P - NBR - 9K
TYPE
PORTING SEAL MAX EXCESS
C100 OPTIONS OPTIONS WORKING FLOW
PRESSURE
Repair and seal kits are available P Leave blank for Viton® seals FILTERS
on request -10˚C to +120˚C 9K
1” BSPP female PRESSURE
For a seal kit add SK at the end of the NBR 621 bar SENSING
model code and for a repair kit add RK N (9,000 psi)
Nitrile seals
1” NPT female -30˚C to +105˚C Liquid
EP 241 bar
(3,500 psi)
EPDM seals
-45˚C to +120˚C Gas
KLZ PUMPS
Kalrez® seals ACTUATORS
-25˚C to +120˚C
HNBR
Hydrogenated
Nitrile seals
-20˚C to +120˚C
Further seal options are available
on request
Catalogue also available on digital media VALVES Page 9 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
C12B 5 INLET
CHECK VALVE
1¼” UP TO 483 BAR 7,000 PSI
The C125 is a 1¼” nominal bore OUTLET
check valve. It will allow flow
in one direction, and blocks
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The vaBlve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Cost effective one piece body design
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, mineral oils, water
glycols and plain water
l For Pressure Equipment Directive compliance, always
advise us of system medium
l Various seal options available
l Various porting options available
Specifications Materials
BASIC MODEL C125 Externally Exposed Parts: 316 stainless steel.
NUMBER
Internally Wetted Parts: 316 and 302 stainless steel.
SYMBOL INLET OUTLET
The standard valve is designed for use with air, nitrogen, mineral
oil, water glycols and plain water and may also be used with
a wide variety of media compatible with the materials of
construction.
MAX WORKING 483 bar ! The standard valve has Viton® seals. Further seSaElCopTtiIoOnsNareB-B
PRESSURE (LIQUID) (7,000 psi)
MAX WORKING available via the Product Selector. Compatibility with the
PRESSURE (GAS) 241 bar
(3,500 psi) working fluid at the operating temperature must be considered.
CV (FLOW CAPACITY)
18.9 Typical Performance
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
PORT SIZE 1¼” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 250 500 750 1000 1250
WEIGHT (66.1) (132.1) (198.2) (264.2) (330.3)
2.2 kg Flow - l/min (USgpm)
Specifications may change without notice (4.8 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram 127.0mm SOLENOID
5.00in
63.5mm
2.50in
FLOW
CONTROL
3 PORT
DIRECTIONAL
CONTROL
6 x 8.0mm [0.31in] 4 PORT
TOOLING HOLES DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
INLET OUTLET PILOT
OPERATED
CHECK
Product Selector RELIEF
C125 P - NBR - 7K
VALVE PORTING SEAL MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
C125 P Leave blank for Viton® seals FILTERS
-10˚C to +120˚C 7K
1¼” BSPP female PRESSURE
NBR 483 bar SENSING
N (7,000 psi)
Nitrile seals
1¼” NPT female -30˚C to +105˚C Liquid
EP 241 bar
(3,500 psi)
EPDM seals
-45˚C to +150˚C Gas
KLZ PUMPS
Repair and seal kits are available Kalrez® seals ACTUATORS
on request -25˚C to +200˚C
For a seal kit add SK at the end of the HNBR
model code and for a repair kit add RK
Hydrogenated
Nitrile seals
-20˚C to +150˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 10 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
C150 INLET
CHECK VALVAE
1½” UP TO 414 BAR 6,000 PSI
The C150 is a 1½” nominal bore
check valve. It will allow flow
in one direction, and blocks
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases. A
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Cost effective one piece body design
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, mineral oils, water
glycols and plain water
l For Pressure Equipment Directive compliance, always OUTLET
advise us of system medium
l Various seal options available
l Various porting options available
Specifications Materials
BASIC MODEL C150 Externally Exposed Parts: 316 stainless steel.
NUMBER
Internally Wetted Parts: 316 and 302 stainless steel.
SYMBOL INLET OUTLET
The standard valve is designed for use with air, nitrogen, mineral
oil, water glycols and plain water and may also be used with
a wide variety of media compatible with the materials of
construction.
MAX WORKING 414 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (6,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 241 bar working fluid at the operating temperature must be considered.
(3,500 psi)
CV (FLOW CAPACITY) Typical Performance
25.0
20 SECTIONPressure Drop vs. Flow A-A
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
PORT SIZE 1½” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 250 500 750 1000 1250 1500 1750
WEIGHT (66.1) (132.1) (198.2) (264.2) (330.3) (396.3) (462.4)
1.9 kg Flow - l/min (USgpm)
Specifications may change without notice (4.2 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram 129.5mm SOLENOID
5.10in
63.5mm
2.50in
FLOW
CONTROL
3 PORT
DIRECTIONAL
CONTROL
6 TOOLING HOLES 4 PORT
8.1mm [0.32in] DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
INLET OUTLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
C150 P - NBR - 6K
VALVE PORTING SEAL MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
C150 P Leave blank for Viton® seals FILTERS
-10˚C to +120˚C 6K
1½” BSPP female PRESSURE
NBR 414 bar SENSING
N (6,000 psi)
Nitrile seals
1½” NPT female -30˚C to +105˚C Liquid
EP 241 bar
(3,500 psi)
EPDM seals
-45˚C to +150˚C Gas
KLZ PUMPS
Repair and seal kits are available Kalrez® seals ACTUATORS
on request -25˚C to +200˚C
For a seal kit add SK at the end of the HNBR
model code and for a repair kit add RK
Hydrogenated
Nitrile seals
-20˚C to +150˚C
Further seal options are available
on request
Catalogue also available on digital media VALVES Page 11 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
NR25 -12K
CHECK VALVE
INLET
1/4” UP TO 828 BAR 12,000 PSI
The NR25 is a 1/4” nominal bore OUTLET
check valve. It will allow flow
in one direction, and blocks Materials
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l NACE MR01-75 compliant version available
l High cracking pressure variants available, contact us for
details
l Various seal options available
l Various porting options available
Specifications
BASIC MODEL NR25 Externally Exposed Parts: 316 stainless steel.
NUMBER Internally Wetted Parts: 316 stainless steel with 302 stainless steel
spring. The spring is monel for SWD variants, and inconel for NACE
variants.
SYMBOL INLET OUTLET The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 828 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (12,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 414 bar working fluid at the operating temperature must be considered.
CV (FLOW CAPACITY) (6,000 psi)
Typical Performance
FLUID 0.2 - 1.0
20 Pressure Drop vs. Flow
TEMPERATURE RANGE See Product Selector opposite (290)
44AE 56AE P/N
Liquids and Gases 15
Pressure Drop - bar (psi) (218)
See materials section
10
See Product Selector opposite (145)
and Technical Data section
5
PORT SIZE 1/4” (73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 10 20 30 40 50 60 70
WEIGHT (2.6) (5.3) (7.9) (10.6) (13.2) (15.9) (18.5)
0.3 kg Flow - l/min (USgpm)
Specifications may change without notice (0.7 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
25.7mm A/F 80.8mm [3.18in] NPT & BSP VERSIONS FLOW
[1.01in] 88.9mm [3.50in] 44AE VERSION CONTROL
94.0mm [3.70in] 56AE VERSION
3 PORT
DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
OUTLET INLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
NR25 P - NBR - SWD - 12K
VALVE PORTING SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS OPTIONS WORKING FLOW
PRESSURE
NR25 P Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +160˚C 12K
Repair and seal kits are 1/4” BSPP female SWD PRESSURE
available on request 1.0CV NBR 828 bar SENSING
Materials compatible (12,000 psi)
For a seal kit add SK at the end N Nitrile seals with sea water
of the model code and for a -30˚C to +105˚C Liquid
repair kit add RK 1/4” NPT female NACE
1.0CV EP 414 bar
Materials comply (6,000 psi)
-44AE EPDM seals with NACE MR01-75
-45˚C to +150˚C Gas
1/4” OD medium
pressure tube port KLZ PUMPS
0.2CV Kalrez® seals
-25˚C to +200˚C
-56AE
HNBR
3/8” OD medium
pressure tube port Hydrogenated
Nitrile seals
0.65CV
-20˚C to +150˚C
ACTUATORS
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 12 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
NR25 -20K INLET
CHECK VALVE OUTLET
1/4” UP TO 1,379 BAR 20,000 PSI Materials
The NR25-20K is a 1/4” nominal
bore check valve. It will allow
flow in one direction, and
blocks flow in the opposite
direction. It may also be referred
to as a non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Super duplex and stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l NACE MR01-75 compliant version available
l High cracking pressure variants available, contact us for
details
l Various seal options available
l Various porting options available
Specifications
BASIC MODEL NR25-20K Externally Exposed Parts: Super duplex.
NUMBER Internally Wetted Parts: Super duplex and 316 stainless steel with
302 stainless steel spring and PEEK. The spring is inconel for SWD
and NACE variants.
SYMBOL INLET OUTLET The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 1,379 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (20,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 690 bar working fluid at the operating temperature must be considered.
CV (FLOW CAPACITY) (10,000 psi)
Typical Performance
FLUID 0.2 - 0.65
20 44AE Pressure Drop vs. Flow
TEMPERATURE RANGE See Product Selector opposite (290) 56AE
Liquids and Gases Pressure Drop - bar (psi) 15
(218)
See materials section
10
See Product Selector opposite (145)
and Technical Data section
5
NOMINAL SIZE 1/4” (73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 10 20 30 40 50
WEIGHT (2.6) (5.3) (7.9) (10.6) (13.2)
0.6 kg Flow - l/min (USgpm)
Specifications may change without notice (1.3 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
31.8mm A/F 94.0mm [3.70in] 56AE VERSION FLOW
[1.25in] 88.9mm [3.50in] 44AE VERSION CONTROL
36.6mm 3 PORT
1.44in DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
INLET OUTLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
NR25 - 44AE - NBR - SWD - 20K
VALVE PORTING SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS OPTIONS WORKING FLOW
PRESSURE
NR25 44AE Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +160˚C 20K
1/4” OD medium SWD PRESSURE
pressure tube port NBR 1,379 bar SENSING
Materials compatible (20,000 psi)
0.2CV Nitrile seals with sea water
-30˚C to +105˚C Liquid
56AE NACE
EP 690 bar
3/8” OD medium Materials comply (10,000 psi)
pressure tube port EPDM seals with NACE MR01-75
-45˚C to +150˚C Gas
0.65CV
KLZ
PUMPS
Kalrez® seals
Repair and seal kits are -25˚C to +200˚C ACTUATORS
available on request
HNBR
For a seal kit add SK at the end
of the model code and for a Hydrogenated
repair kit add RK Nitrile seals
-20˚C to +150˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 13 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
NR37 INLET
3/8” CHECK VALVE
UP TO 828 BAR 12,000 PSI
The NR37 is a 3/8” nominal bore OUTLET
check valve. It will allow flow
in one direction, and blocks B B
flow in the opposite direction.
It may also be referred to as a Materials
non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l NACE MR01-75 compliant version available
l High cracking pressure variants available, contact us for
details
l Various seal options available
l Various porting options available
Specifications
BASIC MODEL NR37 Externally Exposed Parts: 316 stainless steel.
NUMBER Internally Wetted Parts: 316 stainless steel with 302 stainless steel
spring. The spring is monel for SWD variants, and inconel for NACE
variants.
SYMBOL INLET OUTLET The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 828 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (12,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 414 bar working fluid at the operating temperature must be considered.
(6,000 psi)
CV (FLOW CAPACITY) Typical Performance
1.3
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
PORT SIZE 3/8” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 20 40 60 80 100
WEIGHT (5.3) (10.6) (15.9) (21.1) (26.4)
0.3 kg Flow - l/min (USgpm)
Specifications may change without notice (0.7 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
25.7mm A/F 80.8mm FLOW
[1.01in] 3.18in CONTROL
3 PORT
DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
OUTLET INLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
NR37 P - NBR - SWD - 12K
VALVE PORTING SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS OPTIONS WORKING FLOW
PRESSURE
NR37 P Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +160˚C 12K
Repair and seal kits are 3/8” BSPP female SWD PRESSURE
available on request NBR 828 bar SENSING
N Materials compatible (12,000 psi)
For a seal kit add SK at the Nitrile seals with sea water
end of the model code and 3/8” NPT female -30˚C to +105˚C Liquid
NACE
for a repair kit add RK EP 414 bar
Materials comply (6,000 psi)
EPDM seals with NACE MR01-75
-45˚C to +150˚C Gas
KLZ PUMPS
Kalrez® seals ACTUATORS
-25˚C to +200˚C
HNBR
Hydrogenated
Nitrile seals
-20˚C to +150˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 14 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
NR50 -12K
CHECK VALVE INLET
1/2” UP TO 828 BAR 12,000 PSI
The NR50 is a 1/2” nominal bore OUTLET
check valve. It will allow flow
in one direction, and blocks Materials
flow in the opposite direction.
It may also be referred to as a Externally Exposed Parts: 316 stainless steel.
non-return valve. Internally Wetted Parts: 316 stainless steel with 302 stainless steel
spring. The spring is inconel for SWD and NACE variants.
The valve uses sealed poppet
technology to give virtually The standard valve is designed for use with air, nitrogen, sweet
zero leakage with liquids and natural gas, mineral oil, water glycols and plain water, and may
gases. also be used with a wide variety of media compatible with the
materials of construction.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l NACE MR01-75 compliant version available
l High cracking pressure variants available, contact us for
details
l Various seal options available
l Various porting options available
Specifications
BASIC MODEL NR50
NUMBER
SYMBOL INLET OUTLET
MAX WORKING 828 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (12,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 414 bar working fluid at the operating temperature must be considered.
CV (FLOW CAPACITY) (6,000 psi)
Typical Performance
FLUID 1.6 - 3.1
20 81AE Pressure Drop vs. Flow
TEMPERATURE RANGE See Product Selector opposite (290) P/N
Liquids and Gases Pressure Drop - bar (psi) 15
(218)
See materials section
10
See Product Selector opposite (145)
and Technical Data section
5
PORT SIZE 1/2” (73)
CRACKING PRESSURE 0.1 - 0.3 bar 0 50 100 150 200
(2 - 5 psi) 0 (13.2) (26.4) (39.6) (52.8)
WEIGHT
0.9 kg
Specifications may change without notice (2.0 lb) Flow - l/min (USgpm)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
38.1mm A/F 101.6mm [4.00in] NPT & BSP VERSIONS FLOW
[1.50in] 120.7mm [4.75in] 81AE VERSION CONTROL
3 PORT
DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
OUTLET INLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
NR50 P - NBR - SWD - 12K
VALVE PORTING SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS OPTIONS WORKING FLOW
PRESSURE
NR50 P Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +160˚C 12K
Repair and seal kits are 1/2” BSPP female SWD PRESSURE
available on request 3.1CV NBR 828 bar SENSING
Materials compatible (12,000 psi)
For a seal kit add SK at the N Nitrile seals with sea water
end of the model code and -30˚C to +105˚C Liquid
1/2” NPT female NACE
for a repair kit add RK 3.1CV EP 414 bar
Materials comply (6,000 psi)
-81AE EPDM seals with NACE MR01-75
-45˚C to +150˚C Gas
9/16” OD medium
pressure tube port KLZ
1.6CV Kalrez® seals
-25˚C to +200˚C
PUMPS
HNBR
ACTUATORS
Hydrogenated
Nitrile seals
-20˚C to +150˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 15 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
NR50 -20K INLET
CHECK VALVE OUTLET
1/2” UP TO 1,379 BAR 20,000 PSI Materials
The NR50-20K is a 1/2” nominal
bore check valve. It will allow
flow in one direction, and
blocks flow in the opposite
direction. It may also be referred
to as a non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Super duplex and stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l NACE MR01-75 compliant version available
l High cracking pressure variants available, contact us for
details
l Various seal options available
l Various porting options available
Specifications
BASIC MODEL NR50-20K Externally Exposed Parts: Super duplex.
NUMBER Internally Wetted Parts: Super duplex and 316 stainless steel with
302 stainless steel spring and PEEK. The spring is inconel for SWD
and NACE variants.
SYMBOL INLET OUTLET The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 1,379 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (20,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 690 bar working fluid at the operating temperature must be considered.
(10,000 psi)
CV (FLOW CAPACITY) Typical Performance
1.6
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
NOMINAL SIZE 1/2” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 20 40 60 80 100
WEIGHT (5.3) (10.6) (15.9) (21.1) (26.4)
1.6 kg Flow - l/min (USgpm)
Specifications may change without notice (3.5 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram 120.7mm SOLENOID
4.75in
44.5mm A/F
[1.75in]
FLOW
CONTROL
50.8mm 3 PORT
2.00in DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
INLET OUTLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
NR50 - 81AE - NBR - SWD - 20K
VALVE PORTING SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS OPTIONS WORKING FLOW
PRESSURE
NR50 81AE Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +160˚C 20K
9/16” OD medium SWD
pressure tube port NBR 1,379 bar
Materials compatible (20,000 psi)
Nitrile seals with sea water PRESSURE
-30˚C to +105˚C Liquid SENSING
NACE
EP 690 bar
Materials comply (10,000 psi)
EPDM seals with NACE MR01-75
-45˚C to +150˚C Gas
KLZ PUMPS
Repair and seal kits are Kalrez® seals ACTUATORS
available on request -25˚C to +200˚C
For a seal kit add SK at the end HNBR
of the model code and for a
repair kit add RK Hydrogenated
Nitrile seals
-20˚C to +150˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 16 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
NR50M
CHECK VALVE
1/2” UP TO 414 BAR 6,000 PSI
The NR50M is a 1/2” nominal
bore check valve for manifold
mounting. It will allow flow in
one direction, and blocks flow
in the opposite direction. It
may also be referred to as a
non-return valve.
The valve uses a soft seated
poppet to give low leakage
with liquids and gases.
l Check or Non-Return valve OUTLET INLET
l Stainless steel construction
l Soft seated poppet design
l Low leakage
l Resilient poppet seal design resists seal damage under
shock flow conditions
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols and water
l Suitable for many other media, contact us for advice
l Various seal options available
Specifications Materials
BASIC MODEL
NUMBER NR50M Externally Exposed Parts: 316 stainless steel with 300 series stainless
steel fasteners.
Internally Wetted Parts: 316 stainless steel with 302 stainless steel
spring, and Acetal.
nThaetusrtaalngdaasr,dmvinaelvraSelEiosCidl, eTwsIaiOgtneNer dgBlyfoc-rBoulssaenwditphlaainir, nitrogen, sweet
water, and may
SYMBOL INLET OUTLET also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 414 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (6,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 276 bar working fluid at the operating temperature must be considered.
(4,000 psi)
CV (FLOW CAPACITY) Typical Performance
2.5
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
NOMINAL SIZE 1/2” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0 40 80 120 160 200
(2 - 5 psi) 0 (10.6) (21.1) (31.7) (42.3) (52.8)
WEIGHT
3.1 kg
Specifications may change without notice (6.8 lb) Flow - l/min (USgpm)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
107.7mm 17.1mm 90.0mm FLOW
4.24in 0.67in 3.54in CONTROL
25.0mm 95.0mm 62.9mm 3 PORT
0.99in 3.74in 2.48in DIRECTIONAL
10.0mm 60.0mm 37.6mm A/F CONTROL
0.39in 2.36in [1.48in]
INLET
OUTLET
48.0mm 63.5mm 4 PORT
1.89in 2.50in DIRECTIONAL
24.0mm
0.95in CONTROL
CHECK
AND
SHUTTLE
5.0mm [0.197in] 35.0mm 40.0mm 4 FIXINGS M10 PILOT
x 3.0mm [0.118in] DEEP 1.38in 1.58in NOTE - 10.0mm FLOW DRILLINGS OPERATED
ORIENTATION HOLE ARE RECOMMENDED IN THE CHECK
(PIN NOT SUPPLIED) MANIFOLD INTERFACE
Product Selector RELIEF
NR50M - NBR - 6K
VALVE SEAL MAX EXCESS
TYPE OPTIONS WORKING FLOW
PRESSURE
NR50M Leave blank for Viton® seals FILTERS
-10˚C to +120˚C 6K
Repair and seal kits are available on request PRESSURE
For a seal kit add SK at the end of the model code NBR 414 bar SENSING
(6,000 psi)
and for a repair kit add RK Nitrile seals
-30˚C to +105˚C Liquid
EP 276 bar
(4,000 psi)
EPDM seals
-45˚C to +120˚C Gas
KLZ PUMPS
Kalrez® seals
-25˚C to +120˚C
HNBR
Hydrogenated
Nitrile seals
-20˚C to +120˚C
Further seal options are available on request
ACTUATORS
Catalogue also available on digital media VALVES Page 17 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
NR75 AA
CHECK VALVE INLET
3/4” UP TO 828 BAR 12,000 PSI
The NR75 is a 3/4” nominal bore OUTLET
check valve. It will allow flow
in one direction, and blocks Materials
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l NACE MR01-75 compliant version available
l High cracking pressure variants available, contact us for
details
l Various seal options available
l Various porting options available
Specifications
BASIC MODEL Externally Exposed Parts: 316 stainless steel.
NUMBER
NR75 Internally Wetted Parts: 316 stainless steel with 302 stainless steel
spring. The spring is inconel for SWD and NACE variants.
SYMBOL INLET OUTLET The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 828 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (12,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 414 bar working fluid at the operating temperature must be considered.
(6,000 psi)
CV (FLOW CAPACITY) Typical Performance
4.6
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
PORT SIZE 3/4” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 50 100 150 200 250 300
WEIGHT (13.2) (26.4) (39.6) (52.8) (66.1) (79.3)
0.8 kg Flow - l/min (USgpm)
Specifications may change without notice (1.8 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
38.1mm A/F 101.6mm FLOW
[1.50in] 4.00in CONTROL
3 PORT
DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
OUTLET INLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
NR75 P - NBR - SWD - 12K
VALVE PORTING SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS OPTIONS WORKING FLOW
PRESSURE
NR75 P Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +160˚C 12K
Repair and seal kits are 3/4” BSPP female SWD PRESSURE
available on request NBR 828 bar SENSING
N Materials compatible (12,000 psi)
For a seal kit add SK at the Nitrile seals with sea water
end of the model code and 3/4” NPT female -30˚C to +105˚C Liquid
NACE
for a repair kit add RK EP 414 bar
Materials comply (6,000 psi)
EPDM seals with NACE MR01-75
-45˚C to +150˚C Gas
KLZ PUMPS
Kalrez® seals ACTUATORS
-25˚C to +200˚C
HNBR
Hydrogenated
Nitrile seals
-20˚C to +150˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 18 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
NR100 INLET
CHECK VALVE
OUTLET
1” UP TO 621 BAR 9,000 PSI
Materials
The NR100 is a 1” nominal bore
check valve. It will allow flow
in one direction, and blocks
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l NACE MR01-75 compliant version available
l High cracking pressure variants available, contact us for
details
l Various seal options available
l Various porting options available
Specifications
BASIC MODEL Externally Exposed Parts: 316 stainless steel.
NUMBER
NR100 Internally Wetted Parts: 316 stainless steel with 302 stainless steel
spring. The spring is inconel for SWD and NACE variants.
SYMBOL INLET OUTLET The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 621 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (9,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 276 bar working fluid at the operating temperature must be considered.
(4,000 psi)
CV (FLOW CAPACITY) Typical Performance
7.7
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
PORT SIZE 1” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 100 200 300 400 500
WEIGHT (26.4) (52.8) (79.3) (105.7) (132.1)
1.9 kg Flow - l/min (USgpm)
Specifications may change without notice (4.2 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
47.2mm A/F 139.7mm FLOW
[1.86in] 5.50in CONTROL
3 PORT
DIRECTIONAL
CONTROL
4 PORT
DIRECTIONAL
CONTROL
CHECK
AND
SHUTTLE
OUTLET INLET
PILOT
OPERATED
CHECK
Product Selector RELIEF
NR100 P - NBR - SWD - 9K
VALVE PORTING SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS OPTIONS WORKING FLOW
PRESSURE
NR100 P Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +160˚C 9K
Repair and seal kits are 1” BSPP female SWD PRESSURE
available on request NBR 621 bar SENSING
N Materials compatible (9,000 psi)
For a seal kit add SK at the Nitrile seals with sea water
end of the model code and 1” NPT female -30˚C to +105˚C Liquid
NACE
for a repair kit add RK EP 276 bar
Materials comply (4,000 psi)
EPDM seals with NACE MR01-75
-45˚C to +150˚C Gas
KLZ PUMPS
Kalrez® seals ACTUATORS
-25˚C to +200˚C
HNBR
Hydrogenated
Nitrile seals
-20˚C to +150˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 19 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
NR200 A A
CHECK VALVE INLET
1¼” 1½” 2” UP TO 414 BAR
6,000 PSI
The NR200 is a 2” nominal bore
check valve. It will allow flow
in one direction, and blocks
flow in the opposite direction.
It may also be referred to as a
non-return valve.
The valve uses sealed poppet OUTLET
technology to give virtually
zero leakage with liquids and Materials
gases.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, mineral oils, water
glycols, water and sea water
l Suitable for many other media. For Pressure Equipment
Directive compliance, always advise us of system medium
l NACE MR01-75 compliant version available
l High cracking pressure variants available, contact us for
details
l Various seal and porting options available
Specifications
BASIC MODEL Externally Exposed Parts: 316 stainless steel.
NUMBER
NR200 Internally Wetted Parts: 316 stainless steel with 302 stainless steel
spring. The spring is inconel for SWD and NACE variants.
SYMBOL INLET OUTLET The standard valve is designed for use with air, nitrogen,
mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
MAX WORKING 414 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (6,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 207 bar working fluid at the operating temperature must be considered.
(3,000 psi)
CV (FLOW CAPACITY) Typical Performance
25.0
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
PORT SIZE 2” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0 500 1000 1500 2000
WEIGHT (2 - 5 psi) 0 (132) (264) (396) (528)
Specifications may change without notice 4.5 kg
(9.9 lb) Flow - l/min (USgpm)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
76.2mm 197.4mm
3.00in 7.77in
FLOW
CONTROL
3 PORT
DIRECTIONAL
CONTROL
12 TOOLING HOLES 4 PORT
8.0mm [0.31in] DIRECTIONAL
127.3mm CONTROL
5.01in
35.1mm
1.38in
CHECK
AND
SHUTTLE
OUTLET INLET PILOT
OPERATED
CHECK
Product Selector RELIEF
NR200 P - NBR - SWD - 6K
VALVE PORTING SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS OPTIONS WORKING FLOW
PRESSURE
NR200 P Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +160˚C 6K
Repair and seal kits are 2” BSPP female SWD PRESSURE
available on request NBR 414 bar SENSING
N Materials compatible (6,000 psi)
For a seal kit add SK at the Nitrile seals with sea water
end of the model code and 2” NPT female -30˚C to +105˚C Liquid
NACE
for a repair kit add RK /125P EP 207 bar
Materials comply (3,000 psi)
1.1/4” BSPP female EPDM seals with NACE MR01-75
-45˚C to +150˚C Gas
/125N
KLZ PUMPS
1.1/4” NPT female
Kalrez® seals ACTUATORS
/150P -25˚C to +200˚C
1.1/2” BSPP female HNBR
/150N Hydrogenated
Nitrile seals
1.1/2” NPT female
-20˚C to +150˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 20 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
CC25
CHECK VALVE
1/4” UP TO 690 BAR 10,000 PSI
The CC25 is a 1/4” nominal ALTERNATIVE
bore cartridge check valve. It OUTLET
will allow flow in one direction,
and blocks flow in the OUTLET
opposite direction. It may also INLET
be referred to as a non-return
valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Cartridge design ideal for installation in manifold systems
l Internally threaded for easy extraction
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l Various seal options available
Specifications CC25 Materials
BASIC MODEL
NUMBER 316 stainless steel with 302 stainless steel spring, and acetal. The
spring is inconel for SWD variants.
The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
SYMBOL INLET OUTLET
MAX WORKING 690 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (10,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 345 bar working fluid at the operating temperature must be considered.
(5,000 psi)
CV (FLOW CAPACITY) Typical Performance
0.7
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
NOMINAL SIZE 1/4” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 10 20 30 40 50
WEIGHT (2.6) (5.3) (7.9) (10.6) (13.2)
0.03 kg Flow - l/min (USgpm)
Specifications may change without notice (0.07 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram 15.2mm SOLENOID
0.60in
ALTERNATIVE 14.2mm FLOW
OUTLET 6.4mm 0.56in CONTROL
0.25in
MEANS OF M6 EXTRACTION
RETENTION MUST THREAD AT BOTH ENDS
BE PROVIDED
33.4mm ±0.13 40 3 PORT
1.315in ±0.005 OUTLET DIRECTIONAL
23.9mm CONTROL
0.940in
ALTERNATIVE 4 PORT
0.8 OUTLET DIRECTIONAL
6.4mm MIN CONTROL
[0.25in]
23.4mm MAX
[0.92in]
6.4mm INLET R0.6mm MAX OUTLET 33.0mm CHECK
0.25in CAVITY DETAIL [0.025in] INLET 1.30in AND
14.31mm ±0.04 SHUTTLE
0.5635in ±0.0015
NOTE: CONTACT BIS FOR DETAILS OF CAVITY PILOT
WITH THREADED PLUG RETENTION. OPERATED
CHECK
Product Selector RELIEF
CC25 - NBR - SWD - 10K
VALVE SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
CC25 Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +120˚C 10K
These valves are not internally serviceable. SWD
Seal kits containing external seals are NBR 690 bar
available on request Materials compatible with (10,000 psi)
For a seal kit add SK at the end of the Nitrile seals sea water
model code -30˚C to +105˚C Liquid
PRESSURE
EP 345 bar SENSING
(5,000 psi)
EPDM seals PUMPS
-45˚C to +120˚C Gas
KLZ The maximum working pressure of
an installed valve is dependent on
Kalrez® seals
-25˚C to +120˚C the housing design.
Contact us for advice if in doubt
HNBR
regarding the suitability of any
Hydrogenated housing design
Nitrile seals
ACTUATORS
-20˚C to +120˚C
Further seal options are
available on request
Catalogue also available on digital media VALVES Page 21 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
CC37
CHECK VALVE
3/8” UP TO 690 BAR 10,000 PSI
The CC37 is a 3/8” nominal ALTERNATIVE
bore cartridge check valve. It OUTLET
will allow flow in one direction,
and blocks flow in the OUTLET
opposite direction. It may also INLET
be referred to as a non-return
valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Cartridge design ideal for installation in manifold systems
l Internally threaded for easy extraction
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l Various seal options available
Specifications CC37 Materials
BASIC MODEL
NUMBER 316 stainless steel with 302 stainless steel spring, and acetal. The
spring is inconel for SWD variants.
The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
SYMBOL INLET OUTLET
MAX WORKING 690 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (10,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 345 bar working fluid at the operating temperature must be considered.
(5,000 psi)
CV (FLOW CAPACITY) Typical Performance
1.3
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
NOMINAL SIZE 3/8” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 20 40 60 80 100
WEIGHT (5.3) (10.6) (15.9) (21.1) (26.4)
0.05 kg Flow - l/min (USgpm)
Specifications may change without notice (0.11 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
ALTERNATIVE 19.1mm 17.4mm FLOW
OUTLET 0.75in 0.68in CONTROL
MEANS OF 9.5mm 1/8" BSP EXTRACTION
RETENTION MUST 0.375in THREAD AT BOTH ENDS
BE PROVIDED
40 30.0mm MAX 3 PORT
[1.18in] DIRECTIONAL
42.8mm ±0.13
1.685in ±0.005 CONTROL
30.7mm OUTLET ALTERNATIVE 4 PORT
1.209in OUTLET DIRECTIONAL
7.3mm MIN CONTROL
[0.29in]
42.3mm CHECK
9.5mm INLET [1.67in] AND
0.375in
OUTLET SHUTTLE
17.49mm ±0.04 INLET
0.6885in ±0.0015 R0.6mm MAX
[0.025in]
0.8
NOTE: CONTACT BIS FOR DETAILS OF CAVITY PILOT
WITH THREADED PLUG RETENTION. OPERATED
CHECK
Product Selector RELIEF
CC37 - NBR - SWD - 10K
VALVE SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
CC37 Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +120˚C 10K
These valves are not internally serviceable. SWD
Seal kits containing external seals are NBR 690 bar
available on request Materials compatible with (10,000 psi)
For a seal kit add SK at the end of the Nitrile seals sea water
model code -30˚C to +105˚C Liquid
PRESSURE
EP 345 bar SENSING
(5,000 psi)
EPDM seals PUMPS
-45˚C to +120˚C Gas
KLZ The maximum working pressure of
an installed valve is dependent on
Kalrez® seals
-25˚C to +120˚C the housing design.
Contact us for advice if in doubt
HNBR
regarding the suitability of any
Hydrogenated housing design
Nitrile seals
ACTUATORS
-20˚C to +120˚C
Further seal options are available
on request
Catalogue also available on digital media VALVES Page 22 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
CC50
CHECK VALVE
1/2” UP TO 690 BAR 10,000 PSI
The CC50 is a 1/2” nominal ALTERNATIVE
bore cartridge check valve. It OUTLET
will allow flow in one direction,
and blocks flow in the
opposite direction. It may also
be referred to as a non-return
valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve OUTLET
l Cartridge design ideal for installation in manifold systems INLET
l Internally threaded for easy extraction
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l Various seal options available
Specifications CC50 Materials
BASIC MODEL
NUMBER 316 stainless steel with 302 stainless steel spring, and acetal. The
spring is inconel for SWD variants.
The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
SYMBOL INLET OUTLET
MAX WORKING 690 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (10,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 345 bar working fluid at the operating temperature must be considered.
(5,000 psi)
CV (FLOW CAPACITY) Typical Performance
2.2
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
NOMINAL SIZE 1/2” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 25 50 75 100 125 150
WEIGHT (6.6) (13.2) (19.8) (26.4) (33.0) (39.6)
0.1 kg Flow - l/min (USgpm)
Specifications may change without notice (0.2 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
ALTERNATIVE 24.6mm 22.2mm FLOW
OUTLET 0.97in 0.87in CONTROL
MEANS OF 12.0mm M12 EXTRACTION
RETENTION MUST 0.47in THREAD AT BOTH ENDS
BE PROVIDED ALTERNATIVE
OUTLET
51.69mm ±0.13 40.0° 3 PORT
2.035in ±0.005 DIRECTIONAL
39.4mm CONTROL
1.550in
OUTLET 4 PORT
0.8 DIRECTIONAL
12.0mm MIN CONTROL
[0.47in]
12.0mm 38.6mm MAXINLET 51.2mm CHECK
0.47in [1.52in] 2.02in AND
22.26mm 0.04 R0.6mm MAX OUTLET SHUTTLE
[0.8765in 0.0015] [0.025in] INLET
CAVITY DETAIL PILOT
OPERATED
NOTE: CONTACT BIS FOR DETAILS OF CAVITY
WITH THREADED PLUG RETENTION. CHECK
Product Selector RELIEF
CC50 - NBR - SWD - 10K
VALVE SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
CC50 Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +120˚C 10K
These valves are not internally serviceable. SWD
Seal kits containing external seals are NBR 690 bar
available on request Materials compatible with (10,000 psi)
For a seal kit add SK at the end of the Nitrile seals sea water
model code -30˚C to +105˚C Liquid
PRESSURE
EP 345 bar SENSING
(5,000 psi)
EPDM seals PUMPS
-45˚C to +120˚C Gas
KLZ The maximum working pressure of
an installed valve is dependent on
Kalrez® seals
-25˚C to +120˚C the housing design.
Contact us for advice if in doubt
HNBR
regarding the suitability of any
Hydrogenated housing design
Nitrile seals
ACTUATORS
-20˚C to +120˚C
Further seal options are available
on request
Catalogue also available on digital media VALVES Page 23 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
CC75
CHECK VALVE
3/4” UP TO 690 BAR 10,000 PSI
The CC75 is a 3/4” nominal ALTERNATIVE
bore cartridge check valve. It OUTLET
will allow flow in one direction,
and blocks flow in the
opposite direction. It may also
be referred to as a non-return
valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve OUTLET
l Cartridge design ideal for installation in manifold systems INLET
l Internally threaded for easy extraction
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l Various seal options available
Specifications CC75 Materials
BASIC MODEL
NUMBER 316 stainless steel with 302 stainless steel spring, and acetal. The
spring is inconel for SWD variants.
The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
SYMBOL INLET OUTLET
MAX WORKING 690 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (10,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 345 bar working fluid at the operating temperature must be considered.
(5,000 psi)
CV (FLOW CAPACITY) Typical Performance
3.5
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
NOMINAL SIZE 3/4” 5
(73)
CRACKING PRESSURE 0.1 - 0.3 bar 0
(2 - 5 psi) 0 50 100 150 200 250
WEIGHT (13.2) (26.4) (39.6) (52.8) (66.1)
0.2 kg Flow - l/min (USgpm)
Specifications may change without notice (0.4 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
ALTERNATIVE OUTLET 31.0mm 30.1mm FLOW
PORT POSITION 1.22in 1.18in CONTROL
MEANS OF
19.1mm 3/8" BSP EXTRACTION
RETENTION MUST 0.75in THREAD AT BOTH ENDS
BE PROVIDED
3 PORT
55.1mm ±0.13 40 DIRECTIONAL
2.170in ±0.005
CONTROL
42.7mm
1.680in OUTLET 4 PORT
DIRECTIONAL
0.8 ALTERNATIVE
OUTLET CONTROL
19.1mm MIN
[0.75in]
41.45mm MAX
[1.632in]
19.1mm INLET 54.6mm
0.75in 2.15in
R0.6mm MAX OUTLET CHECK
30.19mm ±0.04 [0.025in] INLET AND
1.1885in ±0.0015
SHUTTLE
CAVITY DETAIL PILOT
OPERATED
NOTE: CONTACT BIS FOR DETAILS OF CAVITY
WITH THREADED PLUG RETENTION. CHECK
Product Selector RELIEF
CC75 - NBR - SWD - 10K
VALVE SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
CC75 Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚c to +120˚c 10K
These valves are not internally serviceable. SWD
Seal kits containing external seals are NBR 690 bar
available on request Materials compatible with (10,000 psi)
For a seal kit add SK at the end of the Nitrile seals sea water
model code -30˚c to +105˚c Liquid
PRESSURE
EP 345 bar SENSING
(5,000 psi)
EPDM seals PUMPS
-45˚c to +120˚c Gas
KLZ The maximum working pressure of
an installed valve is dependent on
Kalrez® seals
-25˚c to +120˚c the housing design.
Contact us for advice if in doubt
HNBR
regarding the suitability of any
Hydrogenated housing design
Nitrile seals
ACTUATORS
-20˚c to +120˚c
Further seal options are available
on request
Catalogue also available on digital media VALVES Page 24 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
CC100 ALTERNATIVE
CHECK VALVE OUTLET
1” UP TO 414 BAR 6,000 PSI OUTLET
INLET
The CC100 is a 1” nominal
bore cartridge check valve. It
will allow flow in one direction,
and blocks flow in the
opposite direction. It may also
be referred to as a non-return
valve.
The valve uses sealed poppet
technology to give virtually
zero leakage with liquids and
gases.
l Check or Non-Return valve
l Cartridge design ideal for installation in manifold systems
l Internally threaded for easy extraction
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas,
mineral oils, water glycols, water and sea water
l Suitable for many other media, contact us for advice
l Various seal options available
Specifications CC100 Materials
BASIC MODEL
NUMBER 316 stainless steel with 302 stainless steel spring, and acetal. The
spring is inconel for SWD variants.
The standard valve is designed for use with air, nitrogen, sweet
natural gas, mineral oil, water glycols and plain water, and may
also be used with a wide variety of media compatible with the
materials of construction.
SYMBOL INLET OUTLET
MAX WORKING 414 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (LIQUID) (6,000 psi) available via the Product Selector. Compatibility with the
MAX WORKING
PRESSURE (GAS) 241 bar working fluid at the operating temperature must be considered.
(3,500 psi)
CV (FLOW CAPACITY) Typical Performance
5.7
20 Pressure Drop vs. Flow
(290)
FLUID Liquids and Gases Pressure Drop - bar (psi)
TEMPERATURE RANGE 15
See materials section (218)
See Product Selector opposite 10
and Technical Data section (145)
NOMINAL SIZE 1” 5
(73)
CRACKING PRESSURE 0.2 - 0.4 bar 0
(3 - 7 psi) 0 50 100 150 200 250 300 350 400
WEIGHT (13.2) (26.4) (39.6) (52.8) (66.1) (79.3) (92.5) (105.7)
0.4 kg Flow - l/min (USgpm)
Specifications may change without notice (0.9 lb)
Typical performance based on water
VALVES 10/14
Installation Diagram SOLENOID
44.5mm 41.2mm FLOW
1.75in 1.62in CONTROL
ALTERNATIVE
MEANS OF OUTLET 17.4mm EXTRACTION
RETENTION MUST [0.687in] THREAD
40° 3/4" - 16 UNF
BE PROVIDED BOTH ENDS
63.63mm ±0.13 3 PORT
2.505in ±0.005 DIRECTIONAL
46.8mm CONTROL
1.843in
OUTLET 4 PORT
0.8 DIRECTIONAL
ALTERNATIVE
17.4mm MIN OUTLET CONTROL
[0.687in]
46.2mm MAXINLET
[1.82in]
17.4mm R0.6mm MAX OUTLET 63.3mm CHECK
[0.687in] 0.025in INLET 2.49in AND
41.3mm ±0.025 SHUTTLE
1.626in ±0.001
CAVITY DETAIL PILOT
OPERATED
NOTE: CONTACT BIS FOR DETAILS OF CAVITY
WITH THREADED PLUG RETENTION. CHECK
Product Selector RELIEF
CC100 - NBR - SWD - 6K
VALVE SEAL VALVE MAX EXCESS
TYPE OPTIONS OPTIONS WORKING FLOW
PRESSURE
CC100 Leave blank for Viton® seals Leave blank if not required FILTERS
-10˚C to +120˚C 6K
These valves are not internally serviceable. SWD
Seal kits containing external seals are NBR 414 bar
available on request Materials compatible with (6,000 psi)
For a seal kit add SK at the end of the Nitrile seals sea water
model code -30˚C to +105˚C Liquid
PRESSURE
EP 241 bar SENSING
(3,500 psi)
EPDM seals PUMPS
-45˚C to +120˚C Gas
KLZ The maximum working pressure of
an installed valve is dependent on
Kalrez® seals
-25˚C to +120˚C the housing design.
Contact us for advice if in doubt
HNBR
regarding the suitability of any
Hydrogenated housing design
Nitrile seals
ACTUATORS
-20˚C to +120˚C
Further seal options are available
on request
Catalogue also available on digital media VALVES Page 25 TECHNICAL
Visit our website for a full online search facility DATA
The Specifier’s Catalogue
www.bisvalves.co.uk
CV25
VENTING CHECK VALVE
1/4” UP TO 552 BAR 8,000 PSI
The CV25 is a venting check
valve. The valve may be used
otoncveeAnt fluid from acrasAycskteinmg
a preset
pressure is reached. OUTLET
INLET
The valve may be used to
vent liquids or gases to
atmosphere in topside
applications, but is also widely
used subsea to ensure that
equipment remains at or just above ambient pressure when
returning to surface. It should be noted that this valve is
not classified as a safety accessory in terms of the Pressure
Equipment Directive.
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
l Vents fluid to atmosphere at a preset pressure
l Various cracking pressures available
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen and plain water
l Various seal options available
l Contact us for other porting options
Specifications Materials
BASIC MODEL CV25 Externally Exposed Parts: 316 stainless steel.
NUMBER
Internally Wetted Parts: 31S6EaCndT3I0O2 NstaiAnle-sAs steel.
SYMBOL INLET OUTLET The valve is designed for use with air, nitrogen and plain water,
but may be exposed directly to sea water externally. Note that
use with water above 100°C is not recommended. Other media
compatible with the materials of construction may be used,
although consideration must be given to to the safety of such
fluids when vented to atmosphere.
MAX OUTLET 552 bar ! The standard valve has Viton® seals. Further seal options are
PRESSURE (8,000 psi) available via the Product Selector. Compatibility with the
CV (FLOW CAPACITY)
FLUID 1.0 working fluid at the operating temperature must be considered.
TEMPERATURE RANGE
PORT SIZE Liquids and Gases Typical Performance
See materials section 5 Pressure Drop vs. Flow
(73)
See Product Selector opposite
and Technical Data section Pressure Drop - bar (psi) 4
(58)
1/4”
3
CRACKING PRESSURE See product selector (44)
2 1.3B
(29) 0.8B
1
(15) 0.5B
0.03 kg 0
(0.06 lb)
WEIGHT 0 10 20 30 40
(2.6) (5.3) (7.9) (10.6)
Specifications may change without notice
Flow - l/min (USgpm)
Typical performance based on water
VALVES 10/14
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
BiS Valves - Check & Shuttle Mini Catalogue
Discover the best professional documents and content resources in AnyFlip Document Base.
Search