Lubrication & Workshop Equipment - Tecalemit

Catalogue Jan 2016

Lubrication & Workshop
Equipment

Corporate Profile

With over 70 years of experience servicing the lubrication industry Tecalemit continues to build
on our traditions of reliability and customer service with the creation of our new Head Office
and Manufacturing Facility in Adelaide supported by our expanded sales team and additional
distribution warehouses in Sydney and Perth.
Since the early days when Sir Donald Bradman was on the Board of Directors our reputation has
been built on reliability, value for money and a genuine commitment to customer satisfaction.
With new owners, a new management team, a reinvigorated sales team and fresh approach our
objective is to be a customer orientated company and to become a major force in the industry in
the future as we have been in the past.
With our own design engineering services, in house manufacturing capabilities and products
supplied and manufactured by market leaders in their respective fields, Tecalemit has something to
bring to your table.
And with our products and services specified and utilised by FMG, BMA, Rio Tinto, BHP Billiton,
Caterpillar Underground and major Mining OEMs our strength is our passion and our endeavour to
exceed our customer’s expectations.
We hope that you too will choose to be a part of our bright and reinvigorated future.

2

Contents 6
8
OIL HANDLING 9
Air Operated Oil Pumps 10
Hose Reels 11
Oil Dispensing Kits 12
IBC Kit Solutions 13
Trolley & Trolley Kits 16
Hand Operated Oil Pumps 16
Oil Guns & Meters 17
WASTE OIL HANDLING & OIL BUNDING 17
Pedestal & Floor Drainers 18
Low Profile Floor & Pit Waste Oil Drainers 19
Mobile Waste Oil Gravity Drainers 22
Combination Waste Oil Suction / Drainers 22
Air Operated Diaphragm Pumps 23
Oil Bunding 23
23
HOISTS & EQUIPMENT 24
Scissor Lift 28
2 Post Hoists 29
4 Post Hoists 30
Extension Kits 31
Jacking Beams 32
Tyre Equipment 33
CENTRALISED GREASING 34
MLS Series Electric Grease Pump & Accessories 35
TPH3 Series Hydraulic Grease Pumps & Accessories 38
Mobile Pump Station & Accessories 39
Grease Filters 40
Mobile Plant Controllers 40
Single Point Greasers 41
Grease Nipples 42
Pressure Transducers 43
GREASING EQUIPMENT
Air operated Grease Pumps & Kits
High Pressure Grease Pumps
High Volume Low Pressure Ind Pumps
Manual Grease Transfer Pumps
Grease Guns & Accessories
Grease Nipple Kits
Grease Gun Connectors

A more detailed data sheet on any product can be obtained from our website www.tecalemit.com.au
3

Notes

4

Oil Handling

5

Oil Handling

RAASM AIR OPERATED OIL PUMPS

1:1 RATIO LOW PRESSURE TRANSFER PUMPS
1:1 Ratio pumps are designed for transferring low viscosity products relatively short distances at low pressures. They
are ideal for mounting in drums and servicing oil bars. For heavier gear oils and longer distances, or for servicing hose
reels, higher pressure pumps are required.

Model 33061 Extendable 33096 Drum
Compression ratio 1:1 1:1
Air inlet connection F1/4”G F1/4”G
Oil outlet connection F1/2”G F1/2”G
Relative flowrate (free outlet at 8 bar) 23 l/min 23 l/min
Suction tube length - 940 mm
Suction tube diameter 42 mm 42 mm

3:1 RATIO MEDIUM PRESSURE PUMPS
3:1 Ratio pumps are designed for handling low to medium viscosity fluids in small to medium sized
dispensing systems involving single point dispensing through hose reels and end of hose meters.

Model 35161 Extendable 35196 Drum
Compression ratio 3:1 3:1
Air inlet connection F1/4” G F1/4” G
Fluid outlet connection F1/2” G F1/2” G
Relative flowrate (free outlet at 8 bar) 14 l/min 14 l/min
Suction tube length - 940 mm
Suction tube diameter 42 mm 42 mm

6

Oil Handling

5:1 RATIO HIGH PRESSURE MEDIUM VOLUME OIL PUMPS
5:1 Ratio pumps are designed for medium to large systems moving higher viscosity oils longer distances
through hose reels and end of hose dispensing meters and multiple dispensing points.

Model 36061 Extendable 36096 Drum
Compression ratio 5:1 5:1
Air inlet connection F1/4” G F1/4”G
Fluid outlet connection F1/2” G F1/2” G
Relative flowrate (free outlet at 8 bar) 18 l/min 18 l/min
Suction tube length - 940 mm
Suction tube diameter 42 mm 42 mm

5:1 & 7:1 RATIO HIGH PRESSURE HIGH VOLUME OIL PUMPS
RAASM Series 900 industrial air-operated double-acting pumps for distribution. Suitable for
transferring oils,lubricants and similar products also with very high viscosity. The double action
guarantees the delivery of a continuous and constant flow, ideal for all needs. Particularly
effective in systems equipped with multiple distribution points.

Model 90C.51 Stub
Compression ratio 5:1
Air inlet connection F 1/2”
Fluid outlet connection F 3/4”
Relative flowrate (free outlet at 8 bar) 45 l/min
Suction tube length -

Suction tube diameter 62 mm

Model 90C.71 Stub 91C.71 Drum
Compression ratio 5:1 5:1
Air inlet connection F 1/2” F 1/2”
Fluid outlet connection F 3/4” F 3/4”
Relative flowrate (free outlet at 8 bar) 30 l/min 30 l/min
Suction tube length - 940 mm
Suction tube diameter 53 mm 53 mm

7

Oil Handling

HOSE REELS

The Tecalemit range of enclosed steel hose reels will be the perfect
economical solution to your busy workshop. The reels are available in the
following:
Model TEO1215M 15m x 1/2” Steel Swiveling Enclosed Oil
Model TEA3815M 15m x 3/8” Steel Swiveling Enclosed Air or Water

RAASM 260 Series enclosed hose reel equipped with adjustable support and wall bracket with
bayonet hooking. Suitable for the distribution of compressed air, for having tools always ready to use,
and for low pressure delivery of water.
Model 89010 11m x 8mm hose 1/4” BSPM Inlet 1/4” BPSM outlet

RAASM 440 series enclosed hose reels come with swivelling base and four position hose guide for wall, ceiling or floor
mounting. Fully enclosed drums carry up to 15 metres of 1/2” Oil hose, 12 metres of 3/8” air hose or 18 metres of 1/4”
grease hose. Supplied with 0.5m inlet hose and hose buffer kits. Powder coated in unobtrusive white finish, these are
the reels of choice for modern franchise workshops looking for a smooth uncluttered appearance.

Model Numbers 12m x 3/8” air or water 20bar
8440.101 15m x 1/2” air or water 20bar
8440.104 10m x 1/2” oil 150bar
8440.401 15m x 1/2” oil 150bar
8440.402 12m x 1/4” grease 600bar
8440.501 15m x 3/8” grease 600bar
8440.506

RAASM 540 series fixed base hose reels are suitable for air, water, oil, grease, diesel oil and similar products.
Suitable for max 1” hose, they are equipped with an automatic stopping system which allows the hose to be locked at
the required length.
The hose reel drum is sturdy and practical with ribbing and rounded edges. Adjustable arms allow floor, wall or ceiling
application and self-lubricating hose guide rollers helps wide multiway opening.
Available in painted steel or stainless steel version.

Model Numbers 20m x 3/4” air or water 20bar
8540.102 15m x 1” air or water 20bar
8540.103 15m x 3/4” oil 100bar
8540.411 20m x 3/4” oil 100bar
8540.412 15m x 1” diesel 50bar
8540.413 30m x 3/8” grease 600bar
8540.501

High Pressure Wash Down Reel

8422.352 18m x 3/8” hot water 400bar

Full stainless steel hose reel with swiveling base suitable for high pressure hot water to 130C.
AISI304 Stainless Swivel Black synthetic hose with galvanised steel fittings. Teflon seals

8

Oil Handling

OIL DISPENSING KITS

Tecalemit offers a range of simple dispensing methods, depending on your volume and budget. The following are some
examples available.

MODEL 37697
Oil bar pump for 205L drums, includes 3:1 14lpm oil pump, fixed steel spout pipe,
oil bar tap and drip tray. The easy way to get oil from drums.

MODEL 35290
Oil dispensing system with drum mounted 3:1 14lpm
pump. The kit comes complete with digital oil gun
delivery hose, air regulator & connection hose.

MODEL 37676
Oil dispensing system with drum mounted 5:1 18lpm pump. The kit comes complete with 10m x
1/2” hose reel, digital oil gun, wall mounted drip tray, air regulator & connection hose.

RAASM OIL BAR
Oil bar ideal for dispensing engine oil, gear oil, antifreeze and similar liquids.
It offers the availability of up to 3 different types of oil. Equipped with an
easy to clean, removable dripcatcher tray and sturdy support grid. Available
in single, dual & triple taps with or without oil meters. RAASM Model 37686
shown
* Does not include air operated oil pump
Models 37690 Oil bar no meter single tap
37691 Oil bar with meter single tap
37830 Digital meter kit
37692 Oil bar tap

9

Oil Handling

IBC KIT SOLUTIONS

Dispensing solutions for oil and allied products.

MODEL 36610
Dispensing kit for oil and allied products with pump inserted centrally and
open hose reel. Kit is complete with:
3:1 14 l/m air operated oil pump
10m x 1/2” hose reel
Digital oil gun
Drip Tray
Mounting brackets & connection hoses
*IBC Not Included

MODEL 36670
High volume dispensing kit for oil and allied products with pump flood
mounted to the IBC drain and open hose reel. Kit is complete with:
5:1 45 l/m air operated oil pump
15m x 3/4” hose reel
Digital oil gun
Drip tray
Mounting brackets and connection hoses
*IBC Not Included

MODEL TECADBLUE.240
The Tecalemit AdBlue Kit provides all that is required to dispense AdBlue
from an OTC/IBC container.The complete kit has been designed to be
moved and connected to a new full container. An accurate non pulse meter
will visualize the quantity dispensed for a correct refilling of a truck. It has
both totalisator and reset table readouts. Kit is complete with:
34 l/m 240v electric pump
Stainless steel nozzle
Digital in line meter
Support tray
Mounting brackets and connection hoses
*IBC Not Included
10

Oil Handling

TROLLEYS AND TROLLEY KITS

MODEL TEC12200
T-bar’ oil trolley for 60 and 20 Litre drums.
MODEL 80035
Drum trolley with adjustable base for 20-55kg drums and 20-60 Litre drums.

MODEL 80200
Medium duty four wheel drum trolley for 205L and 180kg drums, includes swiveling
rear castor wheels.
MODEL 80201
Heavy Duty four wheel 205L and 180kg ‘Super’ trolley with full sized rear
wheels including brake, tilting tow handle, and hose reel platform.
MOBILE TROLLEY DISPENSING KITS
The ideal combination for dispensing oil in any workplace. The very easy to handle trolley is equipped with a drum
(200lt) clamping device, adjustable side support for stowing accessories & wheel with brake. The unit comes with an
air operated oil pump and digital oil gun.

Model 35220 37200 35200 37100
Ratio 3:1 5:1 3:1 5:1
Flow rate l/min 14l/m 18l/m 14l/m 18l/m
Hose reel - - 10m x 1/2” 10m x 1/2”
Pump 35196 36096 35196 36096
Trolley 80200 80200 80201 80201
Oil Gun 37758 37758 37758 37758
Connection Hose 4m x 1/2” 4m x 1/2” 4m x 1/2” 4m x 1/2”
Weight 34kg 34kg 76kg 76kg

11

Oil Handling

HAND PUMPS

Dispensing solutions for oil and allied products.

SINGLE ACTING HAND PUMPS FOR 20LT & 60LT DRUMS
TEC50420 Gear Oil
TEC50460 Gear Oil
TEC51420 ATF
TEC51460 ATF
Drum pumps for handling engine oil, gear oil, ATF and hydraulic fluids. ATF pumps include a
removable washable strainer. Pumps come complete with 1.2 m delivery hose, bung holster and
non drip tips. Oil delivery is approximately 200ml/stroke
SPRING PRIME PUMP FOR 20LT & 60LT DRUMS
TEC50520 Gear Oil
TEC50560 Gear Oil
TEC51520 ATF
TEC51560 ATF
Spring prime pumps allow oil to be pressurised and released via end of
hose control valve. Ideal for servicing diffs or transmissions with hard to
reach fill points. Delivers approximately 2 strokes/lt. 1.5m delivery hose.
ROTARY OIL PUMP 205LT
TEC60205
TEC60205P
Pump and syphon in both directions. Deliver approximately 300ml per
revolution or 20 lpm.
ROTARY OIL/DIESEL PUMP 205LT
TEC62205
TEC62205P
High volume rotary drum pumps suited to transfer of diesel and coolant
at approximately 1 Lt / revolution. Fuel transfer accessories including
heavy duty bung adaptor, hose kit and fuel filter available.
TEC64205 CHEMICAL PUMP 205LT
Rotary vane oil pump in chemical resistant Ryton, and stainless steel
with Teflon seals. Suitable for handling a variety of aggressive chemicals.
Chemical compatibility chart is available on request.
TEC70205 LEVER PUMP 60LT & 205LT DRUMS
Versatile lever action drum pump suited to low and medium viscosity oils.
330mls per stroke ideal for filling oil bottles.
TEC80205 SYPHON PUMP 205LT
Convenient and economical syphon pump for 205 Litre drums. Suitable
for coolants an other non-solvent fluids, it delivers up to 20 LPM.

12

Oil Handling

OIL GUNS, METERS & ACCESSORIES

MODEL 38022
Durable cast alloy 3/8” control valve for engine and gear oils, non drip tip. Ideal for use
with 37780 in line digital in line batch meter. 1/2”F inlet swivel joint.
MODEL 37751
Durable cast alloy 1/2” control valve for engine and gear oils, semi automatic drip
catcher nozzle and lever locking button.1/2”F inlet swivel joint.
MODEL 37758
Digital Oil gun equipped with digital line-counter. 1/2”F inlet swivel joint. Flexible hose
and non-drip tip.
MODEL 37758H
Digital Oil gun equipped with digital meter. 1/2”F inlet swivel joint. Flexible hose and
auto close non-drip tip.
MODEL TECB500H
Digital preset end of hose meter, which dispenses preset volumes from 0.1 to 99.9lt
Easy to use.1/2”F inlet swivel joint
MODEL 33151
High delivery oil gun grip equipped with F 3/4” inlet swivel joint, filter, lever locking
button, flexible terminal and drip-catcher nozzle ø 35 mm
MODEL 893
Water & antifreeze dispensing nozzle with 3/8” swivel joint and rigid end.
MODEL 37780
Oval gear digital batch meter for in line measurement of oil flow suited for viscosities to
SAE 250 1/2” BSPF inlet and outlet.
MODEL 88630
Wall Mounted modular drip-tray. Equipped with hook for gun and removable drip-
tray. Installed under the hose reel, it is an essential addition for a clean and orderly
workplace.

13

Notes

14

Waste Oil Handling
& Oil Bunding

15

Waste Oil Handling
& Oil Bunding

WASTE OIL HANDLING EQUIPMENT

PEDESTAL OIL DRAINERS
Tecalemit’s Pedestal style oil drainers are the originals and the best of their type. Proven engineering, first class
materials, precision manufacturing and our certified quality systems make these units superior to cheap imitations in
terms of reliability and performance.

Product Code Description
Wine Glass Tecalemit’s oil drainer is designed for simple and
Model TEC2750 efficient waste oil collection and disposal. Heavy
duty ABS bowl, 20lt capacity 510 x 510 mm
suitable for draining all fluids. 1140mm to 2040mm
telescopic stand with reliable lock.

LOW PROFILE FLOOR AND PIT WASTE OIL DRAINERS

MODEL 42069 FLOOR DRAINER 50 LITRE
Wheel-mounted floor waste oil drainer. Suitable for gravity draining of engine, gearbox
and differential oil from all motor vehicles. Equipped with antisplash screen which can be
used as a support for draining oil filters.

MODEL 42073 LOW PROFILE FLOOR DRAINER 95 LITRE
Low profile wheel mounted floor drainer for truck workshops or where a hoist or pit is not
available. Features anti splash screen, fold away push bar & vacuum transfer pump kit.

MODEL 42060 WASTE OIL DRAINER FOR PITS 65 LITRE
Pit mounted 65 Litre capacity waste oil drainer with adjustable roller arms, anti splash
screen and removable splash tray. Bottom draining with ball check valve. Optional quick
connect and vacuum transfer pump kit available.

16

Waste Oil Handling
& Oil Bunding

MOBILE WASTE OIL DRAINERS
RAASM mobile waste oil drainers are designed to collect, store and carry waste oil and coolant from the service bay
to bulk waste oil storage. Practical design including oversize drain bowls, sight gauges and integrated drain hoses
minimise the risk of operator exposure and spillage. Reservoirs are available in a range of convenient sizes and
equipped for quick emptying with low pressure air.
Model 42065 65 Litre
Model 42085 80 Litre
Model 42090 90 Litre

COMBINATION WASTE OIL EVACUATORS
RAASM waste oil evacuators take oil draining convenience and efficiency
to the next level, by sucking hot oil from engines and transmissions via the
dipstick tube. The mobile reservoirs act as vacuum receivers operated by
simple venturi and flow control valves. This allows the unit to be vacuum
charged and emptied at will, and used independently of the air supply. Not
having to lift vehicles or remove plugs increases efficieny. Suction volume 1.5-
2 Litres per minute using 6mm probe at oil temp 70-80 Degrees C. Ideal for
marine engines and other industrial plant.
COMBINATION OIL EVACUATOR/DRAINER
Model 44090 90 litre
90 Litre mobile evacuator/drainer combine convenience and efficiency of
gravity draining or air evacuation. Includes wide profile drain bowl with anti
splash screen, 2 metre suction and drain hoses, suction probes and reservoir
mounted tool tray.
Model 46215 115 litre Pantograph Oil Evacuator/Drainer
The 115 Litre capacity ‘pantograph’ drainer is designed for truck workshops
where vehicles are serviced in bays without pits or hoists. The pantograph
mounted drain tray can be used at floor level or raised and is emptied
by gravity when raised or vacuum when lowered. The unit doubles as an
evacuator with a set of suction probes and 2m suction and drain hoses
included.

17

Waste Oil Handling
& Oil Bunding

AIR OPERATED DIAPHRAGM PUMPS

The RAASM range transfer diaphragm pumps, specifically designed for oil and similar products. Made from either
Polypropylene or die cast aluminum, with high-quality components, ensure lasting and reliable operation even in
extreme conditions. Ideal for transferring fluids even in the presence of suspended solids.

MODEL 3C14011NNH
Suitable for the transfer of high flow diesel for service trucks,
waste oil and coolant & waste water.
1 1/2” 480 L/MIN

MODEL 33.2611NHHV2
Suitable for waste oil & waste coolant transfer discharge from mobile
oil trolleys to waste tanks.
1” 170 L/MIN

MODEL 33.2011NHHV2
Suitable for waste oil & waste coolant transfer discharge from
mobile oil trolleys to waste tanks.
3/4” 70L/MIN

MODEL 2B816117HN2 IN POLYPROPYLENE
Suitable for waste oil & waste coolant transfer discharge
from mobile oil trolleys to waste tanks.
3/4” 60L/MIN

18

Waste Oil Handling
& Oil Bunding

OIL BUNDING

MODEL TEC2DB
Spill pallet for 2 drums, durable removable platform for cleaning, made from
UV-stabilised HDPE.
Dimensions
1300mm Wide
440mm High
750mm Deep

MODEL TEC4DB
Spill pallet for 4 drums, durable removable platform for cleaning, made from
UV-stabilised HDPE.
Dimensions
1380mm Wide
280mm High
1290mm Deep

MODEL TECSIBC
Spill pallet for single IBC, durable removable platform for cleaning, made from
UV-stabilised HDPE.
Dimensions
1450mm Wide
1000mm High
1450mm Deep

MODEL TECDIBC
Spill pallet for dual IBC, durable removable platform for cleaning, made from
UV-stabilised HDPE.
Dimensions
2450mm Wide
575mm High
1450mm Deep

19

Notes

20

Hoist & Equipment

21

Hoist & Equipment

MODEL TEC3.5
At only 98mm the NEW Tecalemit 3.5T low profile full height scissor lift is the perfect solution for quick service bays &
lowered performance vehicles with the standard Tecalemit safety features such as audible lowering alarm & precision
safety locks the TEC3.5 is the perfect addition to your workshop

• Lifting time 35 seconds

• Lowering time 40 seconds

• Electric Motor 400V/50Hz

• Minimum height on ground 98 mm

• Lift height 1945 mm

• Platform length 990 mm

• Platform width 580 mm

MODEL TEC4000XB
Not all hoists offer basic safety equipment like a lowering alarm and a proven screw design with a failsafe interlock
and the protection of Australian Standards compliance. Why compromise when you can have it all in the TEC4000XB.
Traditional value for money from Tecalemit.

• Lifting time 55seconds

• Lowering time 55 seconds

• Electric Motor 400V/50Hz

• Minimum height on ground 103/203 mm

• Lift height 1960 mm

• Internal column width 2650/3000 mm

• Overall width 3630/3980 mm

MODEL TEC513
This heavy duty 4 Tonne hoist will get the big jobs done, why fool around with a pretend 4 tonne hoist when you can
invest in the quality of a TEC513 the Asymmetric design of the TEC513 means nothing gets in the way of you getting
the job done - no more damaged doors!

• Lifting time 35 seconds

• Lowering time 35 seconds

• Electric Motor 400V/50Hz

• Minimum height on ground 115 mm

• Lift height 2000 mm

• Internal column width 2 800 mm

• Overall width 3600 mm

Height extension kits available: (extra cost)
TEC513 3612 mm Standard hoist
TEC513.1 3912 mm (300mm ext kit)
TEC513.2 4212 mm (600mm ext kit)

22

Hoist & Equipment

VEHICLE HOISTS

TEC4004 SERIES
Whether you are doing a big job on a small car or doing small jobs on big vehicles, Tecalemit have the four post
hoist to handle the job. You can choose large or compact models to suit the types of vehicle you service. Tecalemit’s
trademark approach to safety, wheel alignment models, jacking beams and options to suit low profile vehicles make
your job easier.

Model TEC4004 TEC4004L TEC4004WSP
Size Compact Long Long wheel alignment
Overall length (inc ramps) 5420 mm 6140 mm 6140 mm
Lift height 2230 mm 2230 mm 2230 mm
Lowered height 170 mm 190 mm 190 mm
Width between columns 2700 mm 2850 mm 2850mm

JACKING BEAM
TEC4004JB 2tonne Manual
TEC4004JBA 2 tonne Air Operated

MODEL TEC4006
Backed by Tecalemit’s uncompromising approach to safety, outstanding service and parts reliability. The NEW
TEC4006 four post hoist won’t let you down when the workload winds up.

• Lifting time 55 secs

• Electric Motor 400v/50hz

• Minimum height on ground 190 mm

• Lift height 2000 mm

• Internal column width 3 180 mm

• Overall length 7010 mm

• Overall width 3640 mm

JACKING BEAM
TEC4006JBA 3 tonne Air Operated

23

Hoist & Equipment

TYRE EQUIPMENT

MODEL TECMXA
Correct tyre inflation is essential for any modern workshop when checking and
maintaining tyre pressures. With a maximum pressure of 145psi, built in safety
inflation features and Nitrogen capabilities, the MXA is ideally suited for vehicle
hoists or service bays. It’s light and compact enclosure makes it a superior
alternative to the traditional mechanical gauge.
Construction Impact Polycarbonate Alloy
Dimensions 156W x 156H x 90D mm
Power Requirements 220~240VAC (optional 12VDC or 100~120VAC)
Unit of Measurement psi / kPa / bar
Operating Range 5~145psi / 35~1000kPa / 0.3~10.0bar
Accuracy ± 0.3psi / 2kPa / 0.02bar
Included with kit
61.1303 - Hose Kit, Black, Mignon 3m
61.0823 - Hose assy 300mm Mignon
61.0285 - CRT Hose Assy 300mm Mignon

MODEL TEC14391
The TEC14391 Tyre Inflator represents quality and guaranteed accuracy.
The classic hand held, slimline design is easy to hold. Designed to last in
rugged workshop environments, and utilised in over 80% of Australian
service stations.Designed to meet EC standards and constructed in
die cast aluminium for lightweight ease of use. Dual scale standard
calibration is 0 - 138 p.s.i. and 0 - 9.6 bar.

MODEL TEC212A
The TEC212A is complete 4 flexible hoses with air fittings that neatly
fit inside housings on the side of the unit. With 2 handy tool trays and
large work platform for your pneumatic tools, the trolley will greatly
increase the efficiency of your workshop technicians.
Reduces manual wheel handling & risk of injury Helps to easily remove
and refit car & light commercial vehicle wheels Manufactured from
durable stainless steel Simply operated by 2 buttons located on the
trolley handles Stainless steel rollers support and guide the wheel into
position Perfectly aligns the wheel to the vehicle hub.
Supplied complete with a Wheel Transport Trolley & a Brake Bleeder
Fitted with 4 flexible air hoses with air fittings 3 handy tool trays and a
large work platform for pneumatic tools
Air pressure of 1-5kg/m
Height: 112cm
Width: 82cm
Weight: 64kg
24

Hoist & Equipment

CUSTOM FABRICATION

Tecalemit can provide oil tanks fabricated to AS1940B.1993 in both single and double skin, from single compartment to
multi compartment.
Work Benches - stainless top work benches and trolleys in a variety of sizes and colours to meet your requirements.

25

Centralised Greasing

CUSTOMER TESTIMONIAL

RIO TINTO METSO

TECALEMIT LUBRICATION EQUIPMENT TECALEMIT LUBRICATION EQUIPMENT

Rio Tinto Coastal Operations have enjoyed a collaborative Metso Minerals Bulk Materials Handling through their
working relationship with Tecalemit since the mid 1990’s. project division and Tecalemit have been working
Tecalemit have proven to be a clear leader in the field together for several years in the supply of Lubrication
of lubrication on fixed and mobile plant which operates Systems for several of Metso’s largest customer’s, those
in some of the most hostile weather / environmental being Rio Tinto, BHPBIO and FMG.
locations in Australia These systems have been the preferred equipment for
Rio Tinto’s lubrication standard specifies Tecalemit the Iron Ore Car Dumper Systems supplied to the Pilbara
lubrication equipment as a preferred product and supplier Region of Western Australia.
throughout our North West iron ore mining operations. This relationship has grown from simply supply to one
Tecalemit have provided unsurpassed product and that now includes bidirectional communication that
technical support for many years. covers such items as product enhancements, research and
Andrew Carpenter development and technological improvements.
Project Implementation Superintendent Tecalemit’s involvement has been integral in the
Reliability Assurance satisfaction of these customers from the basic product
supply program through to the optimisation and
improvement cycle that without doubt has imbedded
their product within these customer sites.

As a result of this working relationship Tecalemit is
seen as an integral part of the strategic supply chain
membership for Metso Minerals Bulk Materials Handling
and the Iron Ore Car Dumper Systems.

Gary Day
Regional Product Manager - Bulk Materials Handling ANZ
Equipment Systems Business Lines
Metso Mining & Construction Technology

26

Centralised Greasing

27

Centralised Greasing

MLS SERIES ELECTRIC GREASE PUMP KIT

FOR OPEN TOP DRUM

Designed and Manufactured in Australia by Tecalemit.
The grease pump is electrically powered and directly mounted onto an open top grease drum.
The pump is used for high pressure grease supply for automatic greasing systems.

FEATURES

• Proven Delivery of 18,000 kg @ 4,200 psi
• Cast Iron Motor & Fan
• Stainless Steel Lifting Bracket
• Mine Site Specification Motor
• Plated Follower with Moulded Sealing Wiper
• Drum Low Level Switch Option

TECHNICAL DATA 290 Bar (4200 psi)
150cc/minute
• Maximum Grease Pressure Grade 0 - 2
• Grease Output 1/4” BSPP Female
• Greases Teco or customer spec
• Grease Outlet IP66
• Motor 0.37 kW
• Rating 415V 3 Phase, 50Hz
• Power 1,405
• Voltage
• RPM

ITEM DESCRIPTION PART NUMBER 20KG PART NUMBER 55KG PART NUMBER 180kg QTY

1 Pump kit Items 2-7 MLS.CPX3.1 MLS.CPX3.2 MLS.CPX3.3 1
2 Bare pump M703CPX3.1 M703CPX3.2 M703CPX3.3 1
3 Drum cover V17229 V17091 V17096 1
4 Follower V5412.3 BK8150 BK8151 1
5 Mounting screw SWA1105.6 SWA1105.6 SWA1105.6 4
6 Mounting washer 28463.7 28463.7 28463.7 4
7 Grease outlet hose 2m V17105 V17105 V17105 1
* Low level switch V17109 V17109 V17109 1
* Pump seal kit MLS.SK MLS.SK MLS.SK 1
* Grease filter TECGF150G TECGF150G TECGF150G 1

28

Centralised Greasing

TPH3 SERIES HYDRAULIC GREASE PUMP KIT

FOR OPEN TOP DRUM

Designed and Manufactured in Australia by Tecalemit.
The grease pump is hydraulically driven and directly mounted onto an open top grease drum.
The pump is used for high pressure automatic greasing systems. Oil flow can be powered by system hydraulics or a
custom Tecalemit power unit.

FEATURES

• All Steel Construction
• Nickel Plated
• Quick release mounting
• 20, 55 & 180 kg Drum models
• Drum Low Level Switch

TECHNICAL DATA 345 Bar (5,000 psi)
150 cc/minute
• Maximum Grease Pressure Grade 0 - 2
• Grease Output 6 LPM (500 psi)
• Greases 10:1
• Recommended Oil Flow 1/4” BSPP Female
• Pressure Ratio Grease : Oil 1/4” BSPT Male
• Oil Ports A & B 90°C
• Grease Outlet
• Max. Oil temperature

ITEM DESCRIPTION PART NUMBER 20KG PART NUMBER 55KG PART NUMBER 180KG QTY

1 Pump kit Items 2-7 TPH3.20 TPH3.55 TPH3.180 1
2 Bare pump TPH1.20 TPH1.55 TPH1.180 1
3 Drum cover V19524 V17091 V19522 1
4 Drum adaptor V22691 V22691 V22691 1
5 Locknut V18150 V18150 V18150 1
6 Follower plate BK8152 BK8150 BK8151 1
7 Low level switch V17109 V17109 V17109 1
* Pump seal kit TPH1.S TPH1.S TPH1.S 1
* Grease filter TECGF150G TECGF150G TECGF150G 1
* Oil power unit TPSH.PP24V6LPM TPSH.PP24V6LPM TPSH.PP24V6LPM 1

29

Centralised Greasing

TPSH.SL20 MOBILE PLANT AUTOMATIC GREASE PUMP STATION

Designed and Manufactured in Australia by Tecalemit.
The Pump Station is installed on mobile plant to automatically grease lubrication points via injectors.

FEATURES

• Hydraulically Driven by Host Equipment
• Mild Steel Shot Blasted & Powder Coated
• Lockable Hinged Inspection Lid
• 20 Kg Bulk Fill with Inlet Filter
• Adjustable Time ON / Off
• Low Pressure Fault Alarm
• Cabin or Pump Station Mounted Controller
• Test Button & Cycle Count
• Electric Grease Vent Valve with manual override
• Pressure Compensated Oil Relief Valve
• Wall or Foot Mounted with Brackets

TECHNICAL DATA 300 - 400 psi
6 LPM
• Oil Pressure 100 °C
• Recommended Min. Oil Flow 0-2
• Max. Oil temperature 24VDC, 2 Amp
• Greases Grade IP65
• Voltage 50 Kg
• Electrical Protection 51 x 36 x 70cm
• Shipping Weight
• Shipping Dimensions

PART NUMBER DESCRTIPTION

TPSH.SL20 Pump station assembly complete
V20456 Bare pump
TC100D2 Controller
TF150C Grease filter cartridge
TVV24VDC Grease vent valve

30

Centralised Greasing

TECGF SERIES
HIGH FLOW RUPTURE PROOF GREASE FILTER

Designed and Manufactured in Australia by Tecalemit.
The grease filter provides high pressure filtration for fixed and mobile plant applications.

FEATURES

• Non Bypass Filtration @ 5,000 psi
• High Flow
• Heavy Duty Plated Steel Construction
• Grease Pressure Gauge
• Bleed Valve
• Stainless Steel Washable Element

TECHNICAL DATA 349 Bar (5000 psi)
1076 mm2 (150 μm)
• Maximum Pressure 1/2” BSPP Female
• Element Open Area 150, 300 & 450 μm
• Inlet & Outlet 27 x 14 x 8 cm
• Filtration Options 5 Kg
• Shipping Dimensions
• Gross Weight

PART NUMBER DESCRIPTION

TECGF150G 150μm : RIGHT HAND INLET
TECGF150G.L 150μm : LEFT HAND INLET
TECGF300G 300μm : RIGHT HAND INLET
TECGF300G.L 300μm : LEFT HAND INLET
TECGF450G 450μm : RIGHT HAND INLET
TECGF450G.L 450μm : LEFT HAND INLET
TECGF150E 150μm CARTRIDGE
TECGF300E 300μm CARTRIDGE
TECGF450E 450μm CARTRIDGE
V15964 PRESSURE GAUGE
FT291 BLEED VALVE

31

Centralised Greasing

TC100D2 MOBILE PLANT CONTROLLER

Designed and Manufactured in Australia by Tecalemit.
The TC100D2 is a 24V DC microprocessor based controller, engineered to control and monitor automatic lubrication
systems. Manufactured in Australia to operate in harsh environments.

RANGE OF APPLICATIONS

• Single Line Injector Systems
• Single Line Progressive Systems
• Dual Line Systems

FEATURES

• 24V DC 2 Amp
• 2 Amp Anti Surge / Slow Blow
• Variable time ON/OFF
• Digital cycle count
• Pump On light
• Low level light
• Manual test button
• Diecast baked enamel enclosure

TECHNICAL DATA

• 24V DC
• IP65 Rated Enclosure
• 24V DC Alarm Output
• 6.5mm Cable Gland Nuts (supplied)
• Shipping Weight = 800g

32

Centralised Greasing

GS.125 & GS.135
SINGLE POINT GREASE LUBRICATORS

The GS.125 & GS.135 are adjustable automatic grease lubricator systems designed to provide a constant and controlled
supply of grease into bearings of all types. They can be conveniently refilled using a Tecalemit manual or pneumatic
grease gun. The simple but robust construction is built to last and has been tested and proven to effectively operate
in temperatures ranging from -20°C to 125°C. These units can be mounted directly or remotely (with optional kit) onto
almost any bearing requiring a regular supply of grease.

FEATURES

• High Tensile Spring For Strength
• Polycarbonate Piston
• Twin ‘O’ Ring Design Prevents Leaks
• Aluminum Alloy Base
• Unique Design Reduces Backflow
• External Protective Cover For Additional Protection
• Polycarbonate Cup With Grease Volume Indicators
• Brass Control Valve For Precise Grease Flow

TECHNICAL DATA

Standard fittings as supplied
• Male 1/4” BSP
• Male 1/8” BSP
• Male 1/4” UNF

FLOW RATES & ADJUSTMENTS

• For Grade 0 Grease 1 Full Turn = 0.15g/hr
• For Grade 1 Grease 1 Full Turn = 0.10g/hr
• Up To 10 Full Turns of Adjustment

DELIVERY PRESSURE

• GS.125 Up To 18 psi
• GS.135 Up To 10 psi

*Only low delivery pressures required due to bearing being in operation while lubricating.

33

Centralised Greasing

H48SS
316 STAINLESS STEEL GREASE NIPPLE

Grade 316 has an increased ability to resist pitting and crevice corrosion in warm chloride environments. It resists
ordinary rusting in virtually all applications, and is often chosen for more aggressive environments such as ship loading
machinery and fittings on wharves and piers. It is also resistant to most food processing environments, can be readily
cleaned, and resists organic chemicals, dye stuffs and a wide variety of inorganic chemicals.

RANGE OF APPLICATIONS

• Bearings
• Hinges for machines, vehicles and industry
• Cardan shafts
• Drive shafts
• Linear guides
• Hydraulic cylinders
• Chains
• Axles

SUPERIOR CORROSION RESISTANCE

The Tecalemit Grade 316 Stainless Steel Grease Nipple offers corrosion resistance that Grade 304 and plated mild
steel material simply cannot.

TECHNICAL DATA

• Grade 316 stainless steel material
• Specification DIN 17412
• ¼” BSPT taper thread
• 9/16” AF hex body
• Working pressure 5,000 psi
• Maximum pressure 10,000 psi

34

Centralised Greasing

PT5000
TEC PRESSURE TRANSDUCER - GREASE

Introducing the Tecalemit PT5000 grease pressure transducer enabling real time monitoring of line pressure on
Tecalemit Automatic Grease Lubrication Systems using an industry standard of 4 to 20 mA output, together with field
proven connectors and process ports providing high reliability and user flexibility.

FEATURES

• Compact design
• Weatherproof to IP65
• 1/4” BSPT
• Fast response time (<2 ms)
• Temperature compensated
• Input reverse voltage & output short circuit protected

TECHNICAL DATA 5,000 psi
7,500 psi
• Pressure 30,000 psi
• Proof Pressure 300 Series Stainless Steel
• Burst Pressure 50g
• Contact Material 100g peak (11ms)
• Weight -40°C to 125°C
• Shock
• Operating Temp

35

Notes

36

Grease Equipment

37

Grease Equipment

AIR OPERATED GREASE PUMPS & KITS

Mobile grease pumps are a safe, efficient and practical way to move grease in automotive workshops and industrial
plants. Trolley mounted pumps are ideal for workshop and factory floor, while the portable pump is ideal for service
trucks and field work

RAASM
50:1 Grease Kits for 20 & 180 kg drums
Model 64031 20kg
Model 64195 180kg

Description
Kit includes 50:1 ratio grease pump, drum cover and follower with 4m hose, ‘z’
swivel and control valve with flexible extension

Portable Grease Pump and Trolley 20kg
Model 64033

Kit includes 20kg, 50:1 ratio grease pump, drum cover and
follower with hose ‘z’ swivel and control valve with flex and
trolley.

TECALEMIT
Economical Grease Kit
Portable Grease Pump and Trolley 20kg
Model TEC7700
Kit includes 20kg, 50:1 ratio grease pump, drum cover and follower with
hose ‘z’ swivel and control valve with flex and trolley.

Model 64000
Mobile grease dispenser platform. The ideal combination for dispensing grease in any workplace. The very easy to
handle trolley is equipped with a drum (180 - 220 kg) clamping device, adjustable side support for hooking accessories,
and wheel with brake. The platform comes with a handy hose reel with 12 m of hose.

Model 64000

Ratio 50:1

Flow rate 1500g/m

Hose reel 12m x 1/4”

Pump 62095 50:1

Trolley 80201

Grease Gun 66889 with z swivel

Drum Cover 65600

Follower 66590

Weight 85kg

38

Grease Equipment

HIGH PRESSURE / HIGH VOLUME GREASE PUMPS FOR DISTRIBUTION

RAASM’s high pressure grease pumps are based on the same 900 and 1200 series air motors as their oil pumps. These
high ratio pumps produce higher output pressures and volumes than the 50:1 pumps and are recommended for moving
heavy greases and over long distances typically found in large workshops and large centralised systems.

Model 116F.751 75:1 4400 g/min F 1/2”
Air inlet connection F 1/2”
Fluid outlet connection 940mm
Suction tube length 45mm
Suction tube diameter

* Also available in short leg Model 115F.751

Model 91C.701 70:1 3000 g/min F 1/2”
Air inlet connection F 1/2”
Fluid outlet connection 940mm
Suction tube length 45mm
Suction tube diameter

AIR OPERATED GREASE PUMPS
RAASM 600 Series 50:1 & 700 Series 65:1 ratio grease pumps are high pressure
medium output grease pumps suited to small and medium sized workshop dispensing
installations and centralised grease lubrication systems.

Series 600 50:1 1500g/min Model 62048 Model 62095
Drum Size 20 kg 180 kg
Air inlet 1/4” F 1/4” F
Fluid outlet 3/8” F 3/8” F
Suction Tube 480 mm 940 mm
Drum cover 65310 65600
Follower plate 66310 66590

Series 700 65:1 1900g/min Model 63048 Model 63095
Drum Size 20 kg 180 kg
Air inlet 1/4” F 1/4” F
Fluid outlet 3/8” F 3/8” F
Suction Tube 480 mm 940 mm
Drum cover 65310 65600
Follower plate 66310 66590

39

Grease Equipment

HIGH VOLUME / LOW PRESSURE GREASE TRANSFER PUMPS

Series 1200 industrial air-operated pumps. Ideal for the transfer of medium/high-viscosity grease. The high quality of
the components ensures lasting and reliable operation even in extreme conditions.

Model 115F.181 18:1 8 kg / min Polyurethane/PU
Type of seals Carbon Steel
Suction tube upper body Carbon Steel
Suction tube F 1/2”
Air inlet connection F 3/4”
Fluid outlet connection 480mm
Suction tube length 45mm
Suction tube diameter 2,8m3/min
Max. air consumption 8 bar 80dB
Noise Level 8 bar
Air max. feed pressure

Model 116F.401 40:1 10 kg / min Polyurethane/PU
Type of seals Carbon Steel
Suction tube upper body Carbon Steel
Suction tube F 1/2”
Air inlet connection F 1/2”
Fluid outlet connection 740mm
Suction tube length 50mm 2”
Suction tube diameter 2,8m3/min
Max. air consumption 8 bar 80dB
Noise Level 8 bar
Air max. feed pressure

MANUAL GREASE PUMPS
MODEL 60310
20kg manual grease pump kit includes pump, drum cover,follower,
2.5 metre delivery hose and rigid extension with ball cock and
hydraulic connector. Delivers approximately 6 grams / stroke.

MODEL 60410
Hand operated high volume transfer pump includes pump, drum cover, follower, 2 metre delivery
hose and rigid hi-flow extension with ball cock. Optional quick connect couplings available for
refilling fixed plant reservoirs such as truck chassis lube units. Delivers approximately 50 grams /
stroke.
40

Grease Equipment

TECALEMIT GREASE GUNS & ACCESSORIES

Designed and Manufactured in Australia by Tecalemit.

TEC450
Heavy Duty Lever style high pressure grease gun with forged
brass head & precision ground piston to eliminate seals,
generates 7500 psi, supplied with rigid extension and 4 jaw
connector 450 gram or Bulk fill.

TEC450M
Heavy Duty Pistol style medium pressure grease gun with
lightweight cast alloy head and precision ground piston.
Generates 5000 psi, supplied with flexible extension and 4 jaw
connector 450 gram or Bulk fill.

TEC400
Economical lever style grease gun for European & US style 400
gram cartridges or bull fill.

TEC400M
Economical Pistol style grease gun for European & US style 400
gram cartridges or bull fill.

GREASE NIPPLE KITS

Model V4679 - Automotive Grease Nipple Assortment
Contains: 1 x HF4048 4 Jaw Grease Coupler, 5 x H127 1/4’’ SAE Taper Long Straight,
20 x H161 M6 X 1mm Straight, 10 x H162 M8 x 1mm, 10 x H204 M10 x 1mm, 10 x H29
1/8’’ BSP straight, 20 x H3 1/4’’ SAE Taper Straight, 5 x HA107 1/4’’ UNF 90°, 10 x
HA165 M6 x 1mm 90°, 10 x HA168 M6 x 1mm 45°, 5 x HA34 1/8’’ BSP 35°, 5 x HA39
1/8’’ BSP 67.5°, 5 x HA44 1/8’’ BSP 90°, 10 x HA7 1/4’’ SAE Taper 45°
Model V4675 - Industrial Grease Nipple Assortmemt
Contains: 9 X H1 1/4’’ BSF Straight, 6 x H127 5/16’’ BSF Straight, 6 x H127 1/4’’ SAE
Taper Long Straight, 12 X HA28 1/8’’ ANP Straight, 18 x H29 1/8’’ BSP straight, 9 x
H3 1/4’’ SAE Taper Straight, 3 X H48 1/4’’ BSP Straight, 3 x HA107 1/4’’ UNF 90°, 6 x
HA20 5/16’’ BSF 67.5°, 6 x HA37 1/8’’ANP 67.5°, 6 x HA39 1/8’’ BSP 67.5°, 6 X HA43
1/8’’ ANP 90°, 6 x HA44 1/8’’ BSP 90°, 10 x HA7 1/4’’ SAE Taper 45°, 6 X HA8 1/4’’
BSF 67.5°
Model V4676 - Metric Grease Nipple Assortment
Contains: 6 x H15 M8 x 1.25 Straight, 6 x H158 M8 x 1mm Self Tap, 6 x H161 M6 X
1mm Straight, 6 x H162 M8 x 1mm Straight, 6 x HA163 M6 x 1mm Self Tap, 6 x H204
M10 x 1mm , 6 x HA165 M6 x 1mm 90°, 6 x HA168 M6 x 1mm 45° , 6 x HA169 M8 X
1mm 90°, 6 x HA172 M8 x 1mm 45°, 6 x HA173 M8 x 1.25mm 90°, 6 x HA176 M8 x
1.25mm 45°, 6 x HA205 M10 x 1mm 45°, 6 x HA206 M10 x 1mm 90°

41

Grease Equipment

GREASE GUN CONNECTORS

Grease Gun Connectors, extensions and Flexes
HF4048 4 Jaw Hydraulic Connector for Standard Nipples
4 jaw hydraulic connector with steel seat for high pressure connections. Passivated
for corrosion protection and easy identification.

HF4016 TAT Hook on Connector
1/8” BSP hook on connector for button head nipples.

HF4020 Giant Button Head Hook on Connector
1/8” BSP hook on connector for giant button head grease nipples.

HF4063 TAT style thrust on Connector
TAT thrust on connector pushes on to button head nipples.

PNH3009.18 18” PNH3009.10 10” High pressure Flex
High pressure flex allows greasing of nipples in hard to reach places not accessible
with rigid connectors. Ideally suited to pistol style grease guns set up for one handed
operation. 1/8” BSPM both ends.
66889 Grease control valve
Heavy Duty Grease control valve with flexible extension and “Z” swivel. 1/4” BSPF
inlet.

42

Terms, Conditions
& Warranty

Price Lists
All prices quoted do not include GST.
List prices and delivery charges are based on current costs and are therefore subject to alteration without notice. Goods
will be invoiced at the prices ruling at the date of delivery.

Payment Terms
Standard trading terms are nett thirty (30) days to approved credit customers.
Payment is required on or before the last working day of the month following month of invoice.
For non account holders all purchases will require payment before goods are dispatched.

Freight
Orders over $350 will be FIS metro areas in State Capital Cities (Sydney, Melbourne, Brisbane, Adelaide and Perth).
Orders under $350 will be $35 road freight. Air bag under 5 kg $20
Other areas all orders, freight cost to buyers’ account.
Bunded Spill Pallets and special orders excluded from FIS

Warranty
Tecalemit Pty Limited offers a minimum 12 month warranty period from the date of invoice.
RAASM product is offered with a five year warranty period.
The warranty applies to faulty material and workmanship and when used in conditions under which such goods are
ordinarily used.

Return of Goods
Goods returned for credit will only be accepted up to fourteen (14) days from date to despatch provided authorisation is
obtained and the goods are received in ‘as new’ condition. All freight charges to customer account. Credit will be allowed
after 15% is deducted for handling. Merchandise returned because of errors or other deficiencies on the part of the seller
will be replaced at no charge or full credit allowed after the return of same. Non-standard products are non-returnable.

Product Specifications
Tecalemit Pty Limited reserves the right to make any alteration or improvement to, or departure from, any specification
or design or withdraw products at any time, unless otherwise agreed.

Full terms and conditions available on request

43

Tecalemit Pty Limited
2b Cardiff Court Cavan 5094

South Australia
Free Call 1800 685 577
Free Fax 1800 685 533
sales@tecalemit.com.au

tecalemit.com.au