LOCKER
SPECIFIERS’ GUIDE
Lockers
Cabinets
Shelving
The standard of excellence for business, industry and institutions
FINISH NANO METAL
GUIDE ROLLER LATCHING SYSTEM
For unmatched security, nano metal roller latching system
is now standard on single, double and triple-tier lockers
Vandalism and break-in theft are serious problems
for schools, businesses and industrial organizations.
Lyon Engineers have developed a patent pending locker latching
system that utilizes nano metal roller technology to provide
break-in protection compared to existing locker latching systems.
Nylon tamper-resistant lockbar guide ensures proper lockbar
alignment for smooth operation, while
reducing overall noise by eliminating HIGH TECH
metal-to-metal contact. Nano rollers NANO
ROLLERS
ride effortlessly up the door jambs PADLOCK HASP
and drop into place, providing
break-in protection compared to other
locker latching systems. (Note: for NYLON
demonstration purposes, top nano LOCKBAR
roller has been lowered into close
GUIDE
proximity with locker handle.) LOCKBAR
CHANNEL
• Zamak 3 zinc alloy latch finger - for up to four
times the tensile strength than nylon.
• The nano metal roller latch is spring loaded for
smooth and flawless performance.
Antimicrobial Performance ANTIMICROBIAL FINISH
Tests conducted on epoxy coated stainless steel FIGHTS BACTERIAL AND MOLD GROWTH
Antimicrobial lockers are recommended for healthcare, industrial, food processing plants, and
educational facilities of all types.
Antimicrobial steel lockers provide continuous protection against the touch transfer of bacteria on
the locker surface, as well as colonization of mold and bacteria in the corners, seams and on hidden
surfaces behind and under the locker.
How Does it Work?
Any moisture triggers the controlled release
of powerful silver ions (see charts) to provide
superior antimicrobial protection for decades.
The antimicrobial compound is completely
inorganic, less toxic than ordinary table salt,
less irritating than talcum powder, and has
been approved by the EPA, FDA and NSF for
medical devices and food contact applications.
2 1-800-323-0082 | lyonworkspace.com
LOCKER ORDERING CHECK LIST MOST
Locker Size Widths: 9, 12, 15, 18, 21, 24 COMMON
See locker pages for Depths: 12, 15, 18, 21, 24
available combinations. Heights: 8, 9, 12, 15, 18, 20, 24, 30, 36, 48, 60, 72 APPLICATIONS
Standard, Heavy-Duty, Specialty
Type of Locker SELECTION
Type of Construction Knocked Down, Set-Up, All Welded
Number of Openings GUIDE
Per Frame (Tier) 1, 2, 3, 4, 5, 6, 8, 9
Type of Leg Pre-School Page
Type of Base None, 6", 16" Specialty, Cubbies............................. 19
Louver or Perforations 4" and 6" "Z"-Type, Closed, Kitchen Cabinet, None
Standard Louver, No Louver, Full Louver, Mini-Louver, Elementary School Corridor
Type of Handle Full Mini-Louver or Diamond Perforations Standard............................................. 4
Recessed with Lockbar (Stainless Steel or Zinc), Turn Handle with Specialty, ADA.................................. 19
Type of Lock Lockrods, Single Point, Box Locker Pull Handle, Tamper Guard
Handle with Lockbar Middle/Junior High/High
Color Built In Combination, Built In Key Control, Combination Padlock, School Corridor
Key Control Padlock, Digital Locks, None
Shelves Lyon Premier Colors, Special Color, Antimicrobial Properties, Standard............................................. 4
Locker Bottom Galvannealed, Hammertone Heavy-Duty Corridor ........................... 6
Reinforced 16 gauge, 20 gauge, 24 gauge, Heavy-Duty......................................... 8
Type of Top 16 gauge, 20 gauge, 24 gauge, Specialty, ADA ............................ 18, 19
Middle/Junior High/High
Flat, Individual Slope, Sloping Hood, Integrated Slope School Locker Room
Standard - P.E.................................... 4
Heavy-Duty Corridor ........................... 6
Heavy-Duty - P.E./Team................ 8, 10
All-Welded ........................................ 12
All-Welded Extreme........................... 14
Deluxe Collegiate, Team.................... 16
College or University
Standard - General Use ..................... 4
Heavy-Duty - General/Team ........ 8, 10
Deluxe Collegiate, Team................... 16
Industrial Locker Room
Standard............................................. 4
Heavy-Duty................................... 8, 10
Specialty, 16" leg lockers.................. 18
Health Club Locker Room
Standard, Value.................................. 4
Heavy-Duty, Durability.................. 8, 10
Specialty........................................... 18
Recreational Center
Standard, Value.................................. 4
Heavy-Duty, Durability.................. 8, 10
Office Area
Standard............................................. 4
Specialty, ADA............................ 18, 19
Employee Locker Area
Standard, Value.................................. 4
Heavy-Duty, Durability........................ 8
ADA Lockers
Specialty........................................... 19
Accessories........................................... 20
Locker Anchoring.................................. 24
Finish Guide.......................................... 26
Impacting the Environment................... 27
1-800-323-0082 | lyonworkspace.com 3
STANDARD *Optional mini-louver ventilation shown. Standard louvers are base option.
LOCKERS
CONFIGURATIONS FEATURES
Single Tier Lockers • Lockbars feature nano roller latching fingers that engage 12-gauge door jambs for
W: 9, 12, 15, 18 maximum security
D: 12, 15, 18, 21, 24 • High security single point latches are designed for built-in locks with wrap around
H: 60*, 72* technology. Includes padlock hasp
H: 37*
• The door frames are formed by overlapping and welding the junction between the
(actual 37-1⁄32) horizontal and vertical members to form a rigid unitized structure that fully frames the door
H: 48*
• Standard hinges are full loop design and provide more strength than larger butt type hinges
(actual 48-5⁄8)
• Full loop hinges are inserted through slots in the door and frame to maintain alignment
Double Tier Lockers and increase strength
W: 9, 12, 15, 18
• Door frames include integral full height 16-gauge door strikes to reinforce door edges
D: 12, 15, 18, 21, 24
H: 30*, 36* • One piece doors formed from 16-gauge prime, high grade class 1 steel
Triple Tier Lockers • Three latch points on single tier doors and two on double and triple tier doors
W: 9, 12, 15
• One piece recessed handle pockets add strength to the handle area and eliminate the
D: 12, 15, 18, 21 vulnerable seams of formed handles
H: 20*, 24*
• Soft rubber bumpers, at door jamb locations, cushion door slams
Multiple Tier Lockers
Four Tier Lockers HANDLE OPTIONS
W: 12, 15
D: 12, 15, 18, 21 Stainless Steel Single Point Recessed
H: 15*, 18* Recessed Handles* Handle Latching System
with finger lift offers added operates with no additional
Five and Six Tier Lockers safety and security with a moving parts. Available on single,
W: 12, 15 clean flush mount appearance. double and triple-tier lockers.
Standard on single, double Not available on 9" wide lockers.
D: 12, 15, 18, 21 and triple-tier lockers. Option Option available for zinc alloy.
H: 12* available for zinc alloy.
Additional cost option.
*Add 6" to overall height for legs when included. Pull Handles
with built-in padlock loop Turn Handles
are standard on multiple tier have built-in padlock attachments,
lockers. Optional roll point catch and heavy-duty, 3 point locking
available. mechanisms that fully engage the
frame. Available on single, double
and triple-tier lockers.
Tamper Guard Handles* Also see ADA lockers on page 19.
have built-in padlock loop and
slim profile. Available on single,
double and triple-tier lockers.
*Lyon lockbar is standard.
4 1-800-323-0082 | lyonworkspace.com
Body - 24-gauge steel, flanged to give double thickness of metal at back vertical corners.
Door Frame - 16-gauge formed steel channels. Vertical members have an additional flange to form STANDARD
continuous door strike. Corners are lapped and welded into a rigid assembly. In addition, bottom cross LOCKERS
members have tang at each end that fits through slot in rear flange of upright frame member to prevent
twisting out of alignment. Top and bottom cross members provide support for front edge of locker top SPECIFICATION SUMMARY
and locker bottom.
• 16-gauge door and frames
Door - One-piece, 16-gauge steel on single, double and triple tier with both vertical edges formed into • 24-gauge body parts
channel-shaped formation; top and bottom are flanged at 90 degree angle. On multiple tier lockers, • One piece 16-gauge door
hinge side is formed into channel shaped formation with other three sides flanged at 90 degree angle. • Full loop type hinges
• Secure multi-point locking system
Note: Box locker doors, up to and including 15" wide by 15" high, are 18-gauge unless specified otherwise. • Stainless steel recessed handles
• Powder coat finish
Ventilation - Louvers shall be provided as follows: • Built in padlock loop
• Built in locks are also available
Locker Styles Louvers
(see page 25)
Single/Double tier lockers – 9"w Six 3-1⁄2" louvers top and bottom • Fully assembled
Single tier lockers – Over 9"w Six 6" louvers top and bottom construction optional
Double tier lockers – Over 9"w Six 6" louvers top and bottom MATERIAL
Triple tier lockers – 9"w Two 3-1⁄2" louvers top and bottom Prime, high grade Class 1 mild
annealed, cold-rolled steel free
Triple tier lockers – Over 9"w Two 6" louvers top and bottom from surface imperfections.
A.S.T.M.-A1008. Galvannealed
Multiple tier lockers Three 3-1⁄2" louvers per door for 12" and 15" wide lockers steel available for high humidity
atmospheres. A.S.T.M.-A653. Bolts
Four 6" louvers per door for lockers 18" wide and over to be zinc plated or subjected to
other rust-retardant treatment.
Door Jambs - 48" and higher single tier lockers have three door jambs; double tier and triple tier
lockers have two jambs welded to side of door frames to engage locking device. Design and gauge of Quiet-Plus Eliminating metal
jamb prevent freeing of locking device by prying. Each jamb has easily replaceable soft rubber bumpers. to metal contact, all Lyon locker
doors are fitted with nylon
Hinges are less than 2" high, 18-gauge steel, 5 knuckle, full loop design forming double thickness on lockbar guides to reduce clanging
each leaf. Hinges are set in slot in door and frame and projection welded to frame and securely attached and provide smoother, quieter
to door; Hinge pins are spun over at ends to resist removal. Single-tier lockers 48", 60" and 72" high operation.
have three hinges. All other tiers have two hinges – all on right hand side of door. Optional continuous In addition to quieter lock bars,
hinge available. Lyon Quiet-Plus locker doors
include a sound deadening door
Quiet Locking Device - Single tier locking device engage frame at three points; double tier and triple panel. The resulting combination
tier at two points. Channel shaped locking device with full length reinforcing ribs are a quiet design minimizes noise levels caused by
utilizing nylon guide inserts to reduce metal to metal contact. The locking device includes a latch opening and closing locker doors.
finger that engages the 12-gauge door jamb. Lock bar is enclosed on three sides and operate within
the channel formation of the door. Locking device is prelocking so mechanism can be locked in open CSI Formatted Specifications
position – door locking automatically when closed. An optional single point latch is available except are available at
on 9" wide lockers. Box lockers have one-point locking device with a 14-gauge lock clip for attaching www.lyonworkspace.com/architects
padlock. Doors also provide a lock hole filler to permit use of built in lock.
Note: There are certain sizes and/or
Handles - On single, double and triple tier lockers, handles are stainless steel recessed. No moving types of lockers that are available in
parts are to operate against outside surface of locker. Padlock attachment is an integral part of lift which minimum quantity production runs only.
is attached directly to locking bar and protected by fixed handle housing. Handle provides a built in Contact your Lyon factory representative
padlock strike. The recessed handle is 4-1⁄8"w x 6-1⁄16"h x 1-1⁄4"d. Multiple tier lockers are equipped for complete details.
with a 16-gauge door pull with padlock attachment when not used with built in locks.
Shelves - Single tier lockers have one 24-gauge shelf approximately 9" below top. Flanged on all four
sides for strength with the front flange turned 45 degrees for safety and attached at no less than two
points through each side flange. Only single tier lockers 48" and taller have shelves.
Coat Hooks - Single tier, double tier and triple tier lockers have one double prong hook and three
single prong wall hooks. 5⁄8" diameter coat rods are standard in 18" and 21" deep knocked down single
tier lockers, replacing ceiling hook. All hooks are zinc plated or subjected to a comparable rust retardant
treatment and attached with two nuts and bolts.
Number Plates - Optional aluminum number plates with etched figures at least 3⁄8" high. All lockers
shall have the number plate punching located near top of the doors.
Standard Finish - Exposed steel parts are thoroughly cleaned, given a bonding and rust inhibitive
phosphate treatment and then electrostatically sprayed with powder coat. Note: contact Lyon for finish
compatibility with any chemicals.
Anchoring - To prevent tipping or injury, Lyon strongly recommends that lockers be floor and/or wall
anchored. “Z” Type Bases are available for lockers without legs.
Recess Trim - End and top recess trim for lockers are placed in wall recesses with 18-gauge formed
steel with a 2-3⁄4" wide face and are bolted to locker frames.
Top recess trim are in approximately 5'0" lengths with a formed splice cap to cover joints and to hold
top recess trim in alignment. End recess trim are 2-3⁄4" higher than lockers and will lap over ends of top
recess trim for a hairline joint at top of corners.
1-800-323-0082 | lyonworkspace.com 5
HEAVY-DUTY
CORRIDOR
LOCKERS
CONFIGURATIONS FEATURES
Single Tier Lockers Lyon Solutions to Locker Abuse:
W: 9, 12, 15, 18
• Lockbars feature nano roller latching fingers that engage 12-gauge door jambs for
D: 12, 15, 18, 21, 24 maximum security
H: 60*, 72*
H: 37* • High security single point latches are designed for built-in locks with wrap around
technology; includes padlock hasp
(actual 37-1⁄32)
H: 48* • The door frames are formed by overlapping and welding the junction between the horizontal
and vertical members to form a rigid unitized structure that fully frames the door
(actual 48-5⁄8)
• Standard hinges are full loop design and provide more strength than larger butt type hinges
Double Tier Lockers
W: 9, 12, 15, 18 • Full loop hinges are inserted through slots in the door and frame to maintain alignment and
increase strength
D: 12, 15, 18, 21, 24
H: 30*, 36* • Door frames include integral full height 16-gauge door strikes to reinforce door edges
Triple Tier Lockers • One piece doors formed from 14-gauge prime, high grade class 1 steel
W: 9, 12, 15
• Three latch points on single tier doors and two on double and triple tier doors
D: 12, 15, 18, 21
H: 20*, 24* • One piece recessed handle pockets add strength to the handle area and eliminate the
vulnerable seams of formed handles
Multiple Tier Lockers
Four Tier Lockers • Soft rubber bumpers at door jamb locations cushion door slams
W: 12, 15
D: 12, 15, 18, 21 HANDLE OPTIONS
H: 15*, 18*
Stainless Steel Single Point Recessed
Five and Six Tier Lockers Recessed Handles* Handle Latching System
W: 12, 15 with finger lift offers added operates with no additional
safety and security with a moving parts. Available on single,
D: 12, 15, 18, 21 clean flush mount appearance. double and triple-tier lockers.
H: 12* Standard on single, double Not available on 9" wide lockers.
and triple-tier lockers. Option Option available for zinc alloy.
*Add 6" to overall height for legs when included. available for zinc alloy.
Additional cost option.
Pull Handles
with built-in padlock loop Turn Handles
are standard on multiple tier have built-in padlock attachments,
lockers. Optional roll point catch and heavy-duty, 3 point locking
available. mechanisms that fully engage the
frame. Available on single, double
and triple-tier lockers.
Tamper Guard Handles* Also see ADA lockers on page 19.
have built-in padlock loop and
slim profile. Available on single,
double and triple-tier lockers.
*Lyon lockbar is standard.
6 1-800-323-0082 | lyonworkspace.com
Body - 24-gauge steel, flanged to give double thickness of metal at back vertical corners.
Door Frame - 16-gauge formed steel channels. Vertical members shall have an additional flange to form HEAVY-DUTY
continuous door strike. Corners shall be lapped and welded into a rigid assembly. In addition, bottom cross CORRIDOR
members shall have tang at each end that fits through slot in rear flange of upright frame member to prevent LOCKERS
twisting out of alignment. Top and bottom cross members shall provide support for front edge of locker top
and locker bottom. SPECIFICATION SUMMARY
Door - One-piece, 14-gauge steel on single, double and triple tier with both vertical edges formed into • 14-gauge door with 16-gauge frame
channel-shaped formation; top and bottom shall be flanged at 90 degree angle. On multiple tier lockers, • 24-gauge body parts
hinge side shall be formed into channel shaped formation with other three sides flanged at 90 degree angle. • One piece 14-gauge door
• Full loop type hinges
Ventilation - Louvers shall be provided as follows: • Powder coat finish
• Secure multi-point locking system
Locker Styles Louvers • Stainless steel recessed handles
Single/Double tier lockers – 9"w Six 3-1⁄2" louvers top and bottom • Built-in padlock loop
Single tier lockers – Over 9"w Six 6" louvers top and bottom • Built-in locks also available
Double tier lockers – Over 9"w Six 6" louvers top and bottom
Triple tier lockers – 9"w Two 3-1⁄2" louvers top and bottom (see page 25)
Triple tier lockers – Over 9"w Two 6" louvers top and bottom • Fully assembled construction optional
Multiple tier lockers Three 3-1⁄2" louvers per door for 12" and 15" wide lockers
Four 6" louvers per door for lockers 18" wide and over MATERIAL
Door Jambs - 48" and higher single tier lockers shall have three door jambs; double tier and triple tier Prime, high grade Class 1 mild annealed,
lockers shall have two jambs welded to side of door frames to engage locking device. Design and gauge of cold-rolled steel free from surface
jamb shall prevent freeing of locking device by prying. Each jamb shall have easily replaceable soft rubber imperfections. A.S.T.M.-A1008.
bumper. Galvannealed steel available for high
humidity atmospheres. A.S.T.M.-A653.
Hinges - Shall be not less than 2" high, .050" steel, 5 knuckle, full loop design forming double thickness on Bolts to be zinc plated or subjected to
each leaf. Hinges to be set in slot in door and frame and projection welded to frame and securely attached other rust-retardant treatment.
to door. Hinge pin to be spun over at ends to resist removal. Single-tier lockers 48", 60" and 72" high to have
three hinges. All other tiers to have two hinges – all on right hand side of door. Optional continuous hinge Quiet-Plus Eliminating metal
available. to metal contact, all Lyon locker
doors are fitted with nylon
Quiet Locking Device - Single tier locking device shall engage frame at three points; double tier and triple lockbar guides to reduce clanging
tier at two points. Channel shaped locking device with full length reinforcing ribs shall be a quiet design and provide smoother, quieter
utilizing nylon guide inserts to reduce metal to metal contact. The locking device shall include a latch finger operation.
that engages the 12-gauge door jamb. Lock bar shall be enclosed on three sides and operate within the In addition to quieter lock bars,
channel formation of the door. Locking device shall be prelocking so mechanism can be locked in open Lyon Quiet-Plus locker doors
position – door locking automatically when closed. An optional single point latch shall be available except include a sound deadening door
on 9" wide lockers. Box locker shall have one-point locking device with a 14-gauge lock clip for attaching panel. The resulting combination
padlock. Doors also to be provided with lock hole filler to permit use of built in lock. minimizes noise levels caused by
opening and closing locker doors.
Handles - On single, double and triple tier lockers, handles shall be stainless steel recessed. No moving
parts are to operate against outside surface of locker. Padlock attachment to be integral part of lift which CSI Formatted Specifications
shall be attached directly to locking bar and protected by fixed handle housing. Handle to provide built are available at
in padlock strike. The recessed handle shall be 4-1⁄8"w x 6-1⁄16"h x 1-1⁄4"d. Multiple tier lockers shall be www.lyonworkspace.com/architects
equipped with a 16 gauge door pull with padlock attachment when not used with built in locks.
Note: There are certain sizes and/or
Shelves - Single tier lockers shall have one 24-gauge shelf approximately 9" below top. Flanged on all four types of lockers that are available in
sides for strength with the front flange turned 45 degrees for safety and attached at no less than two points minimum quantity production runs only.
through each side flange. Only single tier 48" high and taller lockers have shelves. Contact your Lyon factory representative
for complete details.
Coat Hooks - Single tier, double tier and triple tier lockers shall have one double prong hook and three
single prong wall hooks. 5⁄8" diameter coat rods are standard in 18" and 21" deep knocked down single
tier lockers, replacing ceiling hook. All hooks to be zinc-plated or subjected to a comparable rust retardant
treatment and attached with two nuts and bolts.
Number Plates - Optional aluminum number plates with etched figures at least 3⁄8" high. All lockers shall
have the number plate punching located at the near top of the doors.
Standard Finish - Exposed steel parts shall be thoroughly cleaned, given a bonding and rust inhibitive
phosphate treatment and then electrostatically sprayed with a powder coat.
NOTE: Contact Lyon for finish compatibility with any chemicals.
Anchoring - To prevent tipping or injury, Lyon strongly recommends that lockers be floor and/or wall
anchored. “Z” Type Bases are available for lockers without legs.
Recess Trim - End and top recess trim for lockers to be placed in wall recesses shall be 18-gauge formed
steel with a 2-3⁄4" wide face and shall be bolted to locker frames.
Top recess trim to be in approximately 5'0" lengths with a formed splice cap to cover joints and to hold top
recess trim in alignment. End recess trim to be 2-3⁄4"higher than lockers and will lap over ends of top recess
trim for a hairline joint at top of corners.
1-800-323-0082 | lyonworkspace.com 7
HEAVY-DUTY
LOCKERS
CONFIGURATIONS FEATURES
Single Tier Lockers Lyon Solutions to Locker Abuse:
W: 9, 12, 15, 18
• Lockbars feature nano roller latching fingers that engage 12-gauge door jambs for
D: 12, 15, 18, 21, 24 maximum security
H: 60*, 72*
H: 37* • High security single point latches are designed for built-in locks with wrap around
technology; includes padlock hasp
(actual 37-1⁄32)
H: 48* • The door frames are formed by overlapping and welding the junction between the horizontal
and vertical members to form a rigid unitized structure that fully frames the door
(actual 48-5⁄8)
• Standard hinges are full loop design and provide more strength than larger butt type hinges
Double Tier Lockers
W: 9, 12, 15, 18 • Full loop hinges are inserted through slots in the door and frame to maintain alignment and
increase strength
D: 12, 15, 18, 21, 24
H: 30*, 36* • Door frames include integral full height 16-gauge door strikes to reinforce door edges
Triple Tier Lockers • One piece doors formed from 14-gauge prime, high grade class 1 steel
W: 9, 12, 15
• Three latch points on single tier doors and two on double and triple tier doors
D: 12, 15, 18, 21
H: 20*, 24* • One piece recessed handle pockets add strength to the handle area and eliminate the
vulnerable seams of formed handles
Multiple Tier Lockers
Four Tier Lockers • Soft rubber bumpers at door jamb locations cushion door slams
W: 12, 15
D: 12, 15, 18, 21 HANDLE OPTIONS
H: 15*, 18*
Stainless Steel Single Point Recessed
Five and Six Tier Lockers Recessed Handles* Handle Latching System
W: 12, 15 with finger lift offers added operates with no additional
safety and security with a moving parts. Available on single,
D: 12, 15, 18, 21 clean flush mount appearance. double and triple-tier lockers.
H: 12* Standard on single, double Not available on 9" wide lockers.
and triple-tier lockers. Option Option available for zinc alloy.
*Add 6" to overall height for legs when included. available for zinc alloy.
Additional cost option.
Pull Handles
with built-in padlock loop Turn Handles
are standard on multiple tier have built-in padlock attachments,
lockers. Optional roll point catch and heavy-duty, 3 point locking
available. mechanisms that fully engage the
frame. Available on single, double
and triple-tier lockers.
Tamper Guard Handles* Also see ADA lockers on page 19.
have built-in padlock loop and
slim profile. Available on single,
double and triple-tier lockers.
*Lyon lockbar is standard.
8 1-800-323-0082 | lyonworkspace.com
Body - 16-gauge steel, flanged to give double thickness of metal at back vertical corners. 18-gauge backs.
Door Frame - 16-gauge formed steel channels. Vertical members shall have an additional flange to form HEAVY-DUTY
continuous door strike. Corners shall be lapped and welded into a rigid assembly. In addition, bottom cross LOCKERS
members shall have tang at each end that fits through slot in rear flange of upright frame member to prevent
twisting out of alignment. Top and bottom cross members shall provide support for front edge of locker top SPECIFICATION SUMMARY
and locker bottom.
• 14-gauge door with 16-gauge frame
Door - One-piece, 14-gauge steel on single, double and triple tier with both vertical edges formed into • 16-gauge body parts with 18-gauge
channel-shaped formation; top and bottom shall be flanged at 90 degree angle. On multiple tier lockers,
hinge side shall be formed into channel shaped formation with other three sides flanged at 90 degree angle. backs
• One piece 14-gauge door
Ventilation - Louvers shall be provided as follows: • Full loop type hinges
• Powder coat finish
Locker Styles Louvers • Secure multi-point locking system
Single/Double tier lockers – 9"w Six 3-1⁄2" louvers top and bottom • Stainless steel recessed handles
Single tier lockers – Over 9"w Six 6" louvers top and bottom • Built-in padlock loop
Double tier lockers – Over 9"w Six 6" louvers top and bottom • Built in locks are also available
Triple tier lockers – 9"w Two 3-1⁄2" louvers top and bottom
Triple tier lockers – Over 9"w Two 6" louvers top and bottom (see page 25)
Multiple tier lockers Three 3-1⁄2" louvers per door for 12" and 15" wide lockers • Fully assembled construction optional
Four 6" louvers per door for lockers 18" wide and over
MATERIAL
Door Jambs - 48" and higher single tier lockers shall have three door jambs; double tier and triple tier
lockers shall have two jambs welded to side of door frames to engage locking device. Design and gauge of Prime, high grade Class 1 mild
jamb shall prevent freeing of locking device by prying. Each jamb shall have easily replaceable soft rubber annealed, cold-rolled steel free
bumper. from surface imperfections.
A.S.T.M.-A1008. Galvannealed
Hinges - Shall be not less than 2" high, .050" steel, 5 knuckle, full loop design forming double thickness on steel available for high humidity
each leaf. Hinges to be set in slot in door and frame and projection welded to frame and securely attached atmospheres. A.S.T.M.-A653. Bolts
to door. Hinge pin to be spun over at ends to resist removal. Single-tier lockers 48", 60" and 72" high to have to be zinc plated or subjected to other
three hinges. All other tiers to have two hinges – all on right hand side of door. Optional continuous hinge rust-retardant treatment.
available.
Quiet-Plus Eliminating metal
Quiet Locking Device - Single tier locking device shall engage frame at three points; double tier and triple to metal contact, all Lyon locker
tier at two points. Channel shaped locking device with full length reinforcing ribs shall be a quiet design doors are fitted with nylon
utilizing nylon guide inserts to reduce metal to metal contact. The locking device shall include a latch finger lockbar guides to reduce clanging
that engages the 12-gauge door jamb. Lock bar shall be enclosed on three sides and operate within the and provide smoother, quieter
channel formation of the door. Locking device shall be prelocking so mechanism can be locked in open operation.
position – door locking automatically when closed. An optional single point latch shall be available except In addition to quieter lock bars,
on 9" wide lockers. Box locker shall have one-point locking device with a 14-gauge lock clip for attaching Lyon Quiet-Plus locker doors
padlock. Doors also to be provided with lock hole filler to permit use of built in lock. include a sound deadening door
panel. The resulting combination
Handles - On single, double and triple tier lockers, handles shall be stainless steel recessed. No moving minimizes noise levels caused by
parts are to operate against outside surface of locker. Padlock attachment to be integral part of lift which opening and closing locker doors.
shall be attached directly to locking bar and protected by fixed handle housing. Handle to provide built
in padlock strike. The recessed handle shall be 4-1⁄8"w x 6-1⁄16"h x 1-1⁄4"d. Multiple tier lockers shall be CSI Formatted Specifications
equipped with a 16 gauge door pull with padlock attachment when not used with built in locks. are available at
www.lyonworkspace.com/architects
Shelves - Single tier lockers shall have one 16-gauge shelf approximately 9" below top. Flanged on all four
sides for strength with the front flange turned 45 degrees for safety and attached at no less than two points Note: There are certain sizes and/or
through each side flange. Only single tier 48" and taller lockers have shelves. types of lockers that are available in
minimum quantity production runs only.
Coat Hooks - Single tier, double tier and triple tier lockers shall have one double prong hook and three Contact your Lyon factory representative
single prong wall hooks. 5⁄8" diameter coat rods are standard in 18" and 21" deep knocked down single for complete details.
tier lockers, replacing ceiling hook. All hooks to be zinc-plated or subjected to a comparable rust retardant
treatment and attached with two nuts and bolts.
Number Plates - Optional aluminum number plates with etched figures at least 3⁄8" high. All lockers shall
have the number plate punching located at the near top of the doors.
Standard Finish - Exposed steel parts shall be thoroughly cleaned, given a bonding and rust inhibitive
phosphate treatment and then electrostatically sprayed with a powder coat.
NOTE: Contact Lyon for finish compatibility with any chemicals.
Anchoring - To prevent tipping or injury, Lyon strongly recommends that lockers be floor and/or wall
anchored. “Z” Type Bases are available for lockers without legs.
Recess Trim - End and top recess trim for lockers to be placed in wall recesses shall be 18-gauge formed
steel with a 2-3⁄4" wide face and shall be bolted to locker frames.
Top recess trim to be in approximately 5'0" lengths with a formed splice cap to cover joints and to hold top
recess trim in alignment. End recess trim to be 2-3⁄4"higher than lockers and will lap over ends of top recess
trim for a hairline joint at top of corners.
1-800-323-0082 | lyonworkspace.com 9
HEAVY-DUTY
VENTILATED
LOCKERS
CONFIGURATIONS FEATURES
Single Tier • Lockbars feature nano roller latching fingers that engage 12-gauge door jambs for maximum security
Ventilated Lockers • High security single point latches are designed for built-in locks with wrap around technology.
W: 9, 12, 15, 18 Includes padlock hasp
D: 12, 15, 18, 21, 24 • The door frames are formed by overlapping and welding the junction between the horizontal and
H: 60*, 72* vertical members to form a rigid unitized structure that fully frames the door
H: 37* • Standard hinges are full loop design and provide more strength than larger butt type hinges
• Full loop hinges are inserted through slots in the door and frame to maintain alignment and increase
(actual 37-1⁄32)
H: 48* strength
• Door frames include integral full height 16-gauge door strikes to reinforce door edges
(actual 48-5⁄8) • One piece doors formed from 14-gauge prime, high grade class 1 steel
• Three latch points on single tier doors and two on double and triple tier doors
Double Tier • One piece recessed handle pockets add strength to the handle area and eliminate the vulnerable
Ventilated Lockers
seams of formed handles
W: 9, 12, 15, 18 • Soft rubber bumpers, at door jamb locations, cushion door slams
D: 12, 15, 18, 21, 24 • Doors and sides include diamond perforated ventilation
H: 30*, 36* HANDLE OPTIONS
Triple Tier Stainless Steel Single Point Recessed
Ventilated Lockers Recessed Handles* Handle Latching System
with finger lift offers added operates with no additional
W: 9, 12, 15 safety and security with a moving parts. Available on single,
D: 12, 15, 18, 21 clean flush mount appearance. double and triple-tier lockers.
Standard on single, double Not available on 9" wide lockers.
H: 20*, 24* and triple-tier lockers. Option Option available for zinc alloy.
available for zinc alloy.
Multiple Tier Additional cost option.
Ventilated Lockers Pull Handles
Four Tier Ventilated Lockers with built-in padlock loop Turn Handles
are standard on multiple tier have built-in padlock attachments,
W: 12, 15 lockers. Optional roll point catch and heavy-duty, 3 point locking
D: 12, 15, 18, 21 available. mechanisms that fully engage the
frame. Available on single, double
H: 15*, 18* and triple-tier lockers.
Five and Six Tier Ventilated
Tamper Guard Handles* Also see ADA lockers on page 19.
Lockers have built-in padlock loop and
W: 12, 15 slim profile. Available on single,
D: 12, 15, 18, 21 double and triple-tier lockers.
H: 12* *Lyon lockbar is standard.
*Add 6" to overall height for legs when included.
10 1-800-323-0082 | lyonworkspace.com
Body - 16-gauge steel, flanged to give double thickness of metal at back vertical corners. HEAVY-DUTY
18-gauge backs. VENTILATED
LOCKERS
Door Frame - 16-gauge formed steel channels. Vertical members shall have an additional flange to
form continuous door strike. Corners shall be lapped and welded into a rigid assembly. In addition, SPECIFICATION SUMMARY
bottom cross members shall have tang at each end that fits through slot in rear flange of upright frame
member to prevent twisting out of alignment. Top and bottom cross members shall provide support for • 14-gauge door with 16-gauge frame
front edge of locker top and locker bottom. • 16-gauge body parts with
Door - One-piece, 14-gauge steel on single, double and triple tier with both vertical edges formed into 18-gauge backs
channel-shaped formation; top and bottom shall be flanged at 90 degree angle. On multiple tier lockers, • Full loop type hinges
hinge side shall be formed into channel shaped formation with other three sides flanged at 90 degree • Secure multi-point locking system
angle. • Stainless steel recessed handles
• One piece 14-gauge door
Ventilation - Sides and doors shall be punched with diamond shaped perforations. Optional solid sides • Powder coat finish
available. • Doors and sides punched with diamond
Door Jambs - 48” and higher single tier lockers shall have three door jambs; double tier and triple tier shaped perforations
lockers shall have two jambs welded to side of door frames to engage locking device. Design and gauge • Built in padlock loop
of jamb shall prevent freeing of locking device by prying. Each jamb shall have easily replaceable soft • Built in locks are also available
rubber bumper.
(see page 25)
Hinges - Shall be not less than 2” high, .050” steel, 5 knuckle, full loop design forming double thickness • Fully assembled construction optional
on each leaf. Hinges to be set in slot in door and frame and projection welded to frame and securely
attached to door. Hinge pin to be spun over at ends to resist removal. Single-tier lockers 48”, 60” and MATERIAL
72” high to have three hinges. All other tiers to have two hinges – all on right hand side of door. Optional
continuous hinge available. Prime, high grade Class 1 mild annealed,
cold-rolled steel free from surface
Quiet Locking Device - Single tier locking device shall engage frame at three points; double tier and imperfections. A.S.T.M.-A1008.
triple tier at two points. Channel shaped locking device with full length reinforcing ribs shall be a quiet Galvannealed steel available for high
design utilizing nylon guide inserts to reduce metal to metal contact. The locking device shall include humidity atmospheres. A.S.T.M.-A653.
a latch finger that engages the 12-gauge door jamb. Lock bar shall be enclosed on three sides and Bolts to be zinc plated or subjected to
operate within the channel formation of the door. Locking device shall be prelocking so mechanism can other rust-retardant treatment.
be locked in open position – door locking automatically when closed. An optional single point latch shall
be available except on 9” wide lockers. Box locker shall have one-point locking device with a 14-gauge Quiet-Plus Eliminating metal
lock clip for attaching padlock. Doors also to be provided with lock hole filler to permit use of built in to metal contact, all Lyon locker
lock. doors are fitted with nylon
lockbar guides to reduce clanging
Handles - On single, double and triple tier lockers, handles shall be stainless steel recessed. No moving and provide smoother, quieter
parts are to operate against outside surface of locker. Padlock attachment to be integral part of lift which operation.
shall be attached directly to locking bar and protected by fixed handle housing. Handle to provide built In addition to quieter lock bars,
in padlock strike. The recessed handle shall be 4-1⁄8"w x 6-1⁄16"h x 1-1⁄4"d. Multiple tier lockers shall be Lyon Quiet-Plus locker doors
equipped with a 16-gauge door pull with padlock attachment when not used with built in locks. include a sound deadening door
panel. The resulting combination
Shelves - Single tier lockers shall have one 16-gauge shelf approximately 9” below top. Flanged on all minimizes noise levels caused by
four sides for strength with the front flange turned 45 degrees for safety and attached at no less than opening and closing locker doors.
two points through each side flange. Only single tier lockers 48" and taller have shelves.
CSI Formatted Specifications
Coat Hooks - Single tier, double tier and triple tier lockers shall have one double prong hook and are available at
three single prong wall hooks. 5⁄8” diameter coat rods are standard in 18” and 21” deep knocked down www.lyonworkspace.com/architects
single tier lockers, replacing ceiling hook. All hooks to be zinc-plated or subjected to a comparable rust
retardant treatment and attached with two nuts and bolts. Note: There are certain sizes and/or
types of lockers that are available in
Number Plates - Optional aluminum number plates with etched figures at least 3⁄8” high. All lockers shall minimum quantity production runs only.
have the number plate punching located at the near top of the doors. Contact your Lyon factory representative
for complete details.
Standard Finish - Exposed steel parts shall be thoroughly cleaned, given a bonding and rust inhibitive
phosphate treatment and then electrostatically sprayed with powder coat.
NOTE: Contact Lyon for finish compatibility with any chemicals.
Anchoring - To prevent tipping or injury, Lyon strongly recommends that lockers be floor and/or wall
anchored. “Z” Type Bases are available for lockers without legs.
Recess Trim - End and top recess trim for lockers to be placed in wall recesses shall be 18-gauge
formed steel with a 2-3⁄4” wide face and shall be bolted to locker frames.
Top recess trim to be in approximately 5’0” lengths with a formed splice cap to cover joints and to hold
top recess trim in alignment. End recess trim to be 2-3⁄4”higher than lockers and will lap over ends of
top recess trim for a hairline joint at top of corners.
1-800-323-0082 | lyonworkspace.com 11
ALL-WELDED
LOCKERS
CONFIGURATIONS FEATURES
Single Tier Quiet Lockers • Lockbars feature nano roller latching fingers that engage 12-gauge door jambs for
W: 9, 12, 15, 18 maximum security
D: 12, 15, 18, 21, 24 • High security single point latches are designed for built-in locks with wrap around
H: 60*, 72* technology. Includes padlock hasp
H: 37*
• The door frames are formed by overlapping and welding the junction between the
(actual 37-1⁄32) horizontal and vertical members to form a rigid unitized structure that fully frames the door
H: 48*
• Standard hinges are full loop design and provide more strength than larger butt type hinges
(actual 48-5⁄8)
• Full loop hinges are inserted through slots in the door and frame to maintain alignment
Double Tier Quiet Lockers and increase strength
W: 9, 12, 15, 18
• Door frames include integral full height 16-gauge door strikes to reinforce door edges
D: 12, 15, 18, 21, 24
H: 30*, 36* • One piece doors formed from 14-gauge prime, high grade class 1 steel
Triple Tier Quiet Lockers • Three latch points on single tier doors and two on double and triple tier doors
W: 9, 12, 15
• One piece recessed handle pockets add strength to the handle area and eliminate the
D: 12, 15, 18, 21 vulnerable seams of formed handles
H: 20*, 24*
• Soft rubber bumpers, at door jamb locations, cushion door slams
Multiple Tier Lockers
Four Tier Lockers HANDLE OPTIONS
W: 12, 15
D: 12, 15, 18, 21 Stainless Steel Single Point Recessed
H: 15*, 18* Recessed Handles* Handle Latching System
with finger lift offers added operates with no additional
Five and Six Tier Lockers safety and security with a moving parts. Available on single,
W: 12, 15 clean flush mount appearance. double and triple-tier lockers.
Standard on single, double Not available on 9" wide lockers.
D: 12, 15, 18, 21 and triple-tier lockers. Option Option available for zinc alloy.
H: 12* available for zinc alloy.
Additional cost option.
*Add 6" to overall height for legs when included. Pull Handles
with built-in padlock loop Turn Handles
are standard on multiple tier have built-in padlock attachments,
lockers. Optional roll point catch and heavy-duty, 3 point locking
available. mechanisms that fully engage the
frame. Available on single, double
and triple-tier lockers.
Tamper Guard Handles* Also see ADA lockers on page 19.
have built-in padlock loop and
slim profile. Available on single,
double and triple-tier lockers.
*Lyon lockbar is standard.
12 1-800-323-0082 | lyonworkspace.com
Body - 16-gauge steel, flanged to give double thickness of metal at back vertical corners. 18-gauge backs.
Door Frame - 16-gauge formed steel channels. Vertical members shall have an additional flange to form ALL-WELDED
continuous door strike. Corners shall be lapped and welded into a rigid assembly. In addition, bottom cross LOCKERS
members shall have tang at each end that fits through slot in rear flange of upright frame member to prevent
twisting out of alignment. Top and bottom cross members shall provide support for front edge of locker top SPECIFICATION SUMMARY
and locker bottom.
• 14-gauge door with 16-gauge frame
Door - One-piece, 14-gauge steel on single, double and triple tier with both vertical edges formed into • 16-gauge body parts with
channel-shaped formation; top and bottom shall be flanged at 90 degree angle. On multiple tier lockers,
hinge side shall be formed into channel shaped formation with other three sides flanged at 90 degree angle. 18-gauge backs
• All seams and joints welded
Ventilation - Louvers shall be provided as follows: • Full loop type hinges
• One piece 14-gauge door
Locker Styles Louvers • Secure multi-point locking system
Single/Double tier lockers – 9"w Six 3-1⁄2" louvers top and bottom • Stainless steel recessed handles
Single tier lockers – Over 9"w Six 6" louvers top and bottom • Powder coat finish
Double tier lockers – Over 9"w Six 6" louvers top and bottom • Built in padlock loop
Triple tier lockers – 9"w Two 3-1⁄2" louvers top and bottom • Built in locks are also available
Triple tier lockers – Over 9"w Two 6" louvers top and bottom
Multiple tier lockers Three 3-1⁄2" louvers per door for 12" and 15" wide lockers (see page 25)
Four 6" louvers per door for lockers 18" wide and over
MATERIAL
Door Jambs - 48" and higher single tier lockers shall have three door jambs; double tier and triple tier
lockers shall have two jambs welded to side of door frames to engage locking device. Design and gauge of Prime, high grade Class 1 mild
jamb shall prevent freeing of locking device by prying. Each jamb shall have easily replaceable soft rubber annealed, cold-rolled steel free
bumper. from surface imperfections.
A.S.T.M.-A1008. Galvannealed
Hinges - Shall be not less than 2" high, .050" steel, 5 knuckle, full loop design forming double thickness on steel available for high humidity
each leaf. Hinges to be set in slot in door and frame and projection welded to frame and securely attached atmospheres. A.S.T.M.-A653. Bolts
to door. Hinge pin to be spun over at ends to resist removal. Single-tier lockers 48", 60" and 72" high to have to be zinc plated or subjected to
three hinges. All other tiers to have two hinges – all on right hand side of door. Optional continuous hinge other rust-retardant treatment.
available.
General Construction - All
Quiet Locking Device - Single tier locking device shall engage frame at three points; double tier and triple lockers shall be pre-assembled,
tier at two points. Channel shaped locking device with full length reinforcing ribs shall be a quiet design with all seams and joints welded for
utilizing nylon guide inserts to reduce metal to metal contact. The locking device shall include a latch finger rigidity and durability.
that engages the 12-gauge door jamb. Lock bar shall be enclosed on three sides and operate within the
channel formation of the door. Locking device shall be prelocking so mechanism can be locked in open Quiet-Plus Eliminating metal
position – door locking automatically when closed. An optional single point latch shall be available except to metal contact, all Lyon locker
on 9" wide lockers. Box locker shall have one-point locking device with a 14-gauge lock clip for attaching doors are fitted with nylon
padlock. Doors also to be provided with lock hole filler to permit use of built in lock. lockbar guides to reduce clanging
and provide smoother, quieter
Handles - On single, double and triple tier lockers, handles shall be stainless steel recessed. No moving operation.
parts are to operate against outside surface of locker. Padlock attachment to be integral part of lift which In addition to quieter lock bars,
shall be attached directly to locking bar and protected by fixed handle housing. Handle to provide built Lyon Quiet-Plus locker doors
in padlock strike. The recessed handle shall be 4-1⁄8"w x 6-1⁄16"h x 1-1⁄4"d. Multiple tier lockers shall be include a sound deadening door
equipped with a 16-gauge door pull with padlock attachment when not used with built in locks. panel. The resulting combination
minimizes noise levels caused by
Shelves - Single tier lockers shall have one 16-gauge shelf approximately 9" below top. Flanged on all four opening and closing locker doors.
sides for strength with the front flange turned 45 degrees for safety and attached at no less than two points
through each side flange. Only single tier lockers 48" and taller have shelves. CSI Formatted Specifications
are available at
Coat Hooks - Single tier, double tier and triple tier lockers shall have one double prong hook and three www.lyonworkspace.com/architects
single prong wall hooks. All hooks to be zinc-plated or subjected to a comparable rust retardant treatment
and attached with two nuts and bolts. Note: There are certain sizes and/or
types of lockers that are available in
Number Plates - Optional aluminum number plates with etched figures at least 3⁄8" high. All lockers shall minimum quantity production runs only.
have the number plate punching located at the near top of the doors. Contact your Lyon factory representative
for complete details.
Standard Finish - Exposed steel parts shall be thoroughly cleaned, given a bonding and rust inhibitive
phosphate treatment and then electrostatically sprayed with powder coat.
NOTE: Contact Lyon for finish compatibility with any chemicals.
Anchoring - To prevent tipping or injury, Lyon strongly recommends that lockers be floor and/or wall
anchored. “Z” Type Bases are available for lockers without legs.
Recess Trim - End and top recess trim for lockers to be placed in wall recesses shall be 18-gauge formed
steel with a 2-3⁄4" wide face and shall be bolted to locker frames.
Top recess trim to be in approximately 5'0" lengths with a formed splice cap to cover joints and to hold top
recess trim in alignment. End recess trim to be 2-3⁄4"higher than lockers and will lap over ends of top recess
trim for a hairline joint at top of corners.
1-800-323-0082 | lyonworkspace.com 13
ALL-WELDED
EXTREME
LOCKERS
CONFIGURATIONS FEATURES
Single Tier Quiet Lockers • Lockbars feature nano roller latching fingers that engage 12-gauge door jambs for
W: 9, 12, 15, 18 maximum security
D: 12, 15, 18, 21, 24 • High security single point latches are designed for built-in locks with wrap around
H: 60*, 72* technology. Includes padlock hasp
W: 12, 15
• The door frames are formed by overlapping and welding the junction between the
D: 12, 15, 18 horizontal and vertical members to form a rigid unitized structure that fully frames the door
H: 37*
• Full height continuous hinges
(actual 37-1⁄32) • Door frames include integral full height 16-gauge door strikes to reinforce door edges
W: 12, 15 • One piece doors formed from 14-gauge prime, high grade class 1 steel
D: 15, 18 • Three latch points on single tier doors and two on double and triple tier doors
H: 48* • One piece recessed handle pockets add strength to the handle area and eliminate the
(actual 48-5⁄8) vulnerable seams of formed handles. Stainless steel or die cast recessed or cremone
turn handle
Double Tier Quiet Lockers • Soft rubber bumpers, at door jamb locations, cushion door slams
W: 9, 12, 15, 18 • 16-gauge bottom channel reinforcement
• 18-gauge pan reinforcement on door
D: 12, 15, 18, 21, 24
H: 30*, 36* HANDLE OPTIONS
Triple Tier Quiet Lockers Stainless Steel Single Point Recessed
W: 9, 12, 15 Recessed Handles* Handle Latching System
with finger lift offers added operates with no additional
D: 12, 15, 18, 21 safety and security with a moving parts. Available on single,
H: 20*, 24* clean flush mount appearance. double and triple-tier lockers.
Standard on single, double Not available on 9" wide lockers.
Multiple Tier Lockers and triple-tier lockers. Option Option available for zinc alloy.
Four Tier Lockers available for zinc alloy.
W: 12, 15 Additional cost option.
D: 12, 15, 18, 21 Pull Handles
H: 15*, 18* with built-in padlock loop AVAILABLE Cremone Turn Handles
are standard on multiple tier OPTION with built-in padlock loop, are
Five and Six Tier Lockers lockers. Optional roll point not available on doors larger than
W: 12, 15 catch available. 20" high
D: 12, 15, 18, 21 Tamper Guard Handles*
H: 12* have built-in padlock loop and
slim profile. Available on single,
*Add 6" to overall height for legs when included. double and triple-tier lockers.
*Lyon lockbar is standard.
14 1-800-323-0082 | lyonworkspace.com
Body - 16-gauge steel, flanged to give double thickness of metal at back vertical corners. 18-gauge backs.
Bottoms shall have a 16-gauge channel reinforcement from front to back.
Door Frame - 16-gauge formed steel channels. Vertical members shall have an additional flange to form ALL-WELDED
continuous door strike. Corners shall be lapped and welded into a rigid assembly. In addition, bottom EXTREME
cross members shall have tang at each end that fits through slot in rear flange of upright frame member to LOCKERS
prevent twisting out of alignment. Top and bottom cross members shall provide support for front edge of
locker top and locker bottom. SPECIFICATION SUMMARY
Door - One-piece, 14-gauge steel on single, double and triple tier with both vertical edges formed into • 14-gauge door with 16-gauge frame
channel-shaped formation; top and bottom shall be flanged at 90 degree angle. On multiple tier lockers, • 16-gauge body parts with
hinge side shall be formed into channel shaped formation with other three sides flanged at 90 degree angle.
An 18-gauge pan stiffener will be welded inside the channel - shaped formation of the hinge side of the 18-gauge backs
door. Stiffeners shall be 1" wide on 12" wide doors, 3-1/2" wide on 15" and 18" wide doors, and • All seams and joints welded
7-1/2" wide on 24" wide doors. • Continuous type hinges
• One piece 14-gauge door
Ventilation - Louvers shall be provided as follows: • Secure multi-point locking system
• Stainless steel recessed handles
Locker Styles Louvers • Powder coat finish
Single/Double tier lockers – 9"w Six 3-1⁄2" louvers top and bottom • Built in padlock loop
Single tier lockers – Over 9"w Six 6" louvers top and bottom • Built in locks are also available
Double tier lockers – Over 9"w Six 6" louvers top and bottom
Triple tier lockers – 9"w Two 3-1⁄2" louvers top and bottom (see page 25)
Triple tier lockers – Over 9"w Two 6" louvers top and bottom • 16-gauge reinforced bottom channels
Multiple tier lockers Three 3-1⁄2" louvers per door for 12" and 15" wide lockers • 18-gauge pan reinforcement on door
Four 6" louvers per door for lockers 18" wide and over
MATERIAL
Door Jambs - 48" and higher single tier lockers shall have three door jambs; double tier and triple tier
lockers shall have two jambs welded to side of door frames to engage locking device. Design and gauge of Prime, high grade Class 1 mild
jamb shall prevent freeing of locking device by prying. Each jamb shall have easily replaceable soft rubber annealed, cold-rolled steel free
bumper. from surface imperfections.
A.S.T.M.-A1008. Galvannealed
Hinges - Shall be full height continuous. steel available for high humidity
atmospheres. A.S.T.M.-A653. Bolts
Quiet Locking Device - Single tier locking device shall engage frame at three points; double tier and to be zinc plated or subjected to other
triple tier at two points. Channel shaped locking device with full length reinforcing ribs shall be a quiet rust-retardant treatment.
design utilizing nylon guide inserts to reduce metal to metal contact. The locking device shall include a latch
finger that engages the 12-gauge door jamb. Lock bar shall be enclosed on three sides and operate within General Construction - All lockers
the channel formation of the door. Locking device shall be prelocking so mechanism can be locked in open shall be pre-assembled, with all
position – door locking automatically when closed. An optional single point latch shall be available except seams and joints welded for rigidity
on 9" wide lockers. Box locker shall have one-point locking device with a 14-gauge lock clip for attaching and durability.
padlock. Doors also to be provided with lock hole filler to permit use of built in lock.
Quiet-Plus Eliminating metal
Handles - On single, double and triple tier lockers, handles shall be stainless steel recessed. No moving to metal contact, all Lyon locker
parts are to operate against outside surface of locker. Padlock attachment to be integral part of lift which doors are fitted with nylon
shall be attached directly to locking bar and protected by fixed handle housing. Handle to provide built lockbar guides to reduce clanging
in padlock strike. The recessed handle shall be 4-1⁄8"w x 6-1⁄16"h x 1-1⁄4"d. Multiple tier lockers shall be and provide smoother, quieter
equipped with a 16-gauge door pull with padlock attachment when not used with built in locks. Die Cast operation.
Recessed and cremone turn handle options available.
In addition to quieter lock bars,
Shelves - Single tier lockers shall have one 16-gauge shelf approximately 9" below top. Flanged on all four Lyon Quiet-Plus locker doors
sides for strength with the front flange turned 45 degrees for safety and attached at no less than two points include a sound deadening door
through each side flange. Only single tier lockers 48" and taller have shelves. panel. The resulting combination
minimizes noise levels caused by
Coat Hooks - Single tier, double tier and triple tier lockers shall have one double prong hook and three opening and closing locker doors.
single prong wall hooks. All hooks to be zinc-plated or subjected to a comparable rust retardant treatment
and attached with two nuts and bolts. CSI Formatted Specifications
are available at
Number Plates - Optional aluminum number plates with etched figures at least 3⁄8" high. All lockers shall www.lyonworkspace.com/architects
have number plates attached near top of door.
Note: There are certain sizes and/or
Standard Finish - Exposed steel parts shall be thoroughly cleaned, given a bonding and rust inhibitive types of lockers that are available in
phosphate treatment and then electrostatically sprayed with powder coat. minimum quantity production runs only.
Contact your Lyon factory representative
NOTE: Contact Lyon for finish compatibility with any chemicals. for complete details.
Anchoring - To prevent tipping or injury, Lyon strongly recommends that lockers be floor and/or wall
anchored. “Z” Type Bases are available for lockers without legs.
Recess Trim - End and top recess trim for lockers to be placed in wall recesses shall be 18-gauge formed
steel with a 2-3⁄4" wide face and shall be bolted to locker frames.
Top recess trim to be in approximately 5'0" lengths with a formed splice cap to cover joints and to hold
top recess trim in alignment. End recess trim to be 2-3⁄4" higher than lockers and will lap over ends of top
recess trim for a hairline joint at top of corners.
1-800-323-0082 | lyonworkspace.com 15
DELUXE FEATURES
COLLEGIATE
& COLLEGIATE A- Deluxe Collegiate Lockers offer additional security for special equipment or
assigned gear. 18" high interior compartment bench with padlock hasp. Upper
LOCKERS compartment door may also be equipped with built-in key or combination lock.
CONFIGURATIONS B- Deluxe Collegiate Lockers with Doors offer the same design and construction
features as above, plus the added security of a reinforced door.
Deluxe Collegiate A
Lockers B C- Collegiate Lockers are designed to provide easy access to equipment and
uniforms in team locker rooms. Shelf included.
W: 24, 33, 36
D: 18, 21, 24 D- Collegiate Lockers with Doors are recommended for storing bulky uniforms
of hockey and football teams, offering up to 36" wide compartments.
H: 72, 84
Includes solid back and diamond perf sides. Optional diamond perforated door. Is also
Deluxe Collegiate available as solid or louvered door.
Lockers with Doors
HANDLES
W: 24, 33, 36
D: 18, 21, 24 All doors feature Stainless Steel Recessed Handles with built-in padlock
attachment. Zinc alloy recessed handle or turn handles are also available
H: 72, 84 as an option. Recessed handles are designed to also accommodate built-
in combination and digital locks. Not provided on bulk or security boxes
Collegiate Lockers with lockbar.
W: 24, 33, 36
D: 18, 21, 24
H: 72, 84
C
Collegiate Lockers
with Doors
W: 24, 33, 36
D: 18, 21, 24
H: 72, 84
D
16 1-800-323-0082 | lyonworkspace.com
Body - 16-gauge steel, flanged to give double thickness of metal at back vertical corners. 18-gauge backs. DELUXE
COLLEGIATE
NOTE: Lyon strongly recommends that exposed side end sheets be of solid material. & COLLEGIATE
LOCKERS
Door Frame - Shall be 16-gauge formed steel channels. Vertical members shall have an additional flange
to form continuous door strike. Corners shall be lapped and welded into a rigid assembly. Bottom cross SPECIFICATION SUMMARY
members shall have tang at each end that fits through slot in rear flange of upright frame member to
prevent twisting out of alignment. Top and bottom cross members shall provide support for front edge of All-Welded
locker top and locker bottom. • All seams and Joints welded for rigidity
• Optional compartments shipped
Optional Door - Optional door is supplied only upon request. One-piece, 14-gauge steel with double
both vertical edges formed into channel-shaped formation; top and bottom shall be flanged at 90 degree knocked down
angle. • 16-gauge body parts with 18-gauge backs
• Full loop type hinges
Quiet Locking Device - Locking device shall engage frame at three points. Channel shaped locking • Powder coat finish
device with full length reinforcing ribs shall be a quiet design utilizing nylon guide inserts to reduce metal • 14-gauge sheet metal or no door
to metal contact. The locking device shall include a latch finger that engages the 12-gauge door jamb.
Lock bar shall be enclosed on three sides and operate within the channel formation of the door. Locking compartments
device shall be prelocking so mechanism can be locked in open position – door locking automatically • 16-gauge frame
when closed. An optional single point latch shall be available security. Doors also to be provided with lock • 16-gauge sheet metal
hole filler to permit use of built in lock. • All metal locking systems
• Optional installation of compartments
Hinges - Shall be not less that 2" high, .050" steel, 5 knuckle, full-loop forming double thickness on each
leaf. Hinges to be set in slots in frame and projection-welded to frame – securely attached to door. Hinge at factory
pin to be spun over at ends. Single tier lockers 72" and 60" high to have three hinges, 48" high to have • Stainless steel recessed handle
two hinges, and multiple-tier to have two hinges – all on right-hand side of door. Knocked Down
• 14-gauge sheet metal or
Hat Shelves - Lockers shall have one 16-gauge hat shelf approximately 12" below top. Flanged on sides
and back-channel formation on front flange – attached at no less than two points through each side 16-gauge sheet metal or no door
flange. • 16-gauge frame
• 16-gauge sheet metal sides
Coat Hooks - Lockers shall have one 5/8" diameter coat rod and four single prong wall hooks. All hooks • All metal locking systems
to be zinc-plated or subjected to a comparable rust-retardant treatment and attached with two nuts and • Stainless steel recessed handle
bolts or rivets. • Powder coat finish
Number Plates - Optional aluminum number plates with etched figures at least 3⁄8" high. Can be *Specify All-Welded or Knock Down at
attached to door or security box
time of order
Finish - Steel parts shall be thoroughly cleaned, given a bonding and rust inhibitive phosphate treatment,
and a powder coat finish. Complete locker must be finished in same color. MATERIAL
NOTE: Contact Lyon for finish compatibility with any chemicals. Prime, high grade Class 1 mild
annealed, cold-rolled steel free
Anchoring - To prevent tipping or injury, Lyon strongly recommends that lockers be floor and/or wall from surface imperfections.
anchored. A.S.T.M.-A1008. Galvannealed
steel available for high humidity
Optional Bulk Lock-Up - Optional bulk lock-up is designed to allow for bulk storage and lockup atmospheres. A.S.T.M.-A653. Bolts
capability. Bulk compartment lid acts as a seating area as well. Bulk lock-up is 18" in height, full depth of to be zinc plated or subjected to
locker, and consists of the following components: other rust-retardant treatment.
• Bin front assembly made of 14-gauge steel. CSI Formatted Specifications
are available at
• Lid assembly made of 12-gauge steel and connected to 14-gauge continuous hinge with 0.410" www.lyonworkspace.com/architects
knuckle diameter. Attachment angle is 12-gauge. Hasp located on front of lid is 14-gauge. Hasp
allows for locking capability with use of padlocks. Note: There are certain sizes and/or
types of lockers that are available in
• Lid support angles made of 12-gauge steel and support the lid in the closed position. minimum quantity production runs only.
Contact your Lyon factory representative
Optional Security Box - Designed to allow for small compartmental storage with lockup capabilities. for complete details.
Security box ships knock down, is 12" in height, 12" in width, and spans the depth of the locker opening.
The security box consists of the following components:
• Right hand side and hinge member–made of 16-gauge steel with formations that make up the right
side of the box and is punched for the weldment of continuous hinge.
• Left hand side and lock member–made of 16-gauge steel with formations that make up the left side of
the box and is punched for the weldment of single locking padlock hasp.
• 16-gauge right hand hinged door formed with flanges on all four sides. Door is equipped with
punching to allow for built-in locks.
• Top frame member made of 16-gauge steel. Top frame member acts as a frame closure for upper
portion of box between the door and the exterior locker top.
• Security box sits on the standard Collegiate locker shelf. Shelf is punched with holes to attach the
security box through the two side members. Collegiate shelf acts as a bottom for the security box.
Box is located on the right side of the locker unit.
1-800-323-0082 | lyonworkspace.com 17
SPECIALTY Valor™ Law Enforcement Lockers
LOCKERS Provides secure and generous storage for police/government
& LOCKER issued items; Kevlar® vests, hats, uniforms, pistols, boots,
BENCHES shoes, laptop and personal belongings; duffle bags, wallets,
jewelry and civilian clothes. Maximum ventilation throughout
locker to keep garments, vests and boots cool and dry.
Electrical cutout in the rear top corner for electrical feed for
laptops, cell phones or other electronics.
Prime, high-grade Class 1 steel. 14-gauge door, 16-gauge
sides, top & bottom, and 18-gauge back. Continuous hinged
door with secure latching system.
*Some Assembly Required
TA-50 Gear Lockers Command Gear Lockers
This heavy-duty, fully-ventilated and A heavy-duty, all-welded locker. Original
all-welded locker is built to withstand design was inspired by military pilot’s
harsh usage. flight-related equipment storage needs.
Heavy-gauge “unibody” construction. Lockable upper storage compartment.
16-gauge steel top with 14-gauge Aluminum 3-1/2" x 2-1/4" label holder.
reinforced bottom, back, doors and Heavy duty, 18-gauge, 5/8" diameter
sides. Chrome-plated, pad-lockable hanging rods plus two side hooks for
handle with a high security three-point lighter gear. Ventilated sides. Large
latching system. 16-gauge steel shelf compartment to house the torso harness,
with center reinforcing channel for a 200 G-suit/G-vest, survival vest and related
lb. capacity. Pre-punched holes in back, flying equipment jacket and helmet bags.
sides, and bottom for attaching lockers Lockable lower storage compartment for
to each other and/or to the wall or floor. additional equipment.
1" coat rod and 4 coat hooks to hang Shipped set up.
coats, uniforms and heavy field dress. Overall locker: 24"w x 24"d x 72"h
*Some Assembly Required *Some Assembly Required
Two Person Lockers 16" Leg
are only 15" wide, with Lockers
two full length coat 16" high
compartments and two legs make
separate compartments mopping or
at top. Doors are hinged hosing floors
in the center allowing easier when
simultaneous access for required.
both users. Legs also
W: 15 provide
D: 12, 15, 18, 21 support for
H: 60, 72 benches.
18 1-800-323-0082 | lyonworkspace.com
Cubbie Lockers ADA Lockers
for Kids provide compliant access.
Meet the storage Contact Lyon for
needs for day-care availability of ADA
centers, pre-schools compliant features on other
and elementary locker types and sizes.
schools.
Feature antimicrobial ADA Benches -
powder paint Laminated Hardwood
finish that fights Seat and Backrest
bacterial growth ADA Compliant hardwood
and corrosion on benches with or without
locker surfaces in the backrest. Available with
classroom. painted steel or heavy-duty
cast iron pedestals.
LAMINATED HARDWOOD AND PLASTIC LAMINATE TOP BENCHES
Laminated Hardwood Top - shall have clear Laminated Hardwood Top Plastic Laminate Top
hardwood tops 9-1⁄2" wide by 1-1⁄4" thick finished with two 9-1⁄2" deep x 18" high, from Plastic laminate over
coats of acrylic finish and available in lengths from 3' to 12'. 3 to 12 feet in length in 1 foot hardwood core. 12" wide x
Plastic Laminate Top - shall be color matched plastic increments, deliver all the 18" high, and 3' to 12' long in
laminate, or wood-grain plastic laminate, over laminated versatility and performance 1 ft. increments.
hardwood core. Long sides shall have full 180° soft edge. required for varying floor plans
Tops shall be 12'w x 1-3⁄4"h and available in lengths and locker arrangements.
from 3' to 12'.
Steel Pedestals - Spaced on not more than 6' centers. AVAILABLE PEDESTALS
Overall height shall be 17-3⁄4". Finish of pedestals shall
be same color as lockers. Steel pedestal base shall be
14-gauge steel with 1-5⁄8" tubing uprights.
Heavy-Duty Pedestals - Single piece cast iron
construction. Spaced on maximum 6' centers. 2-1/4"
diameter post with 6" diameter top and bottom. 3/16"
material thickness.
Aluminum Bench Top - 1-1/4"h x 9.5" wide aluminum
alloy with a clear anodic coating.
Aluminum Bench Pedestals - Pedestals shall be two
pieces of anodized aluminum extrusion (6105-T5)
2-1⁄4" x 3⁄4" formed and unit-welded. Base measures
12-5⁄8"w x 14-5⁄8"h. Optional rubber feet.
Trapezoid Pedestal - Made from 1/4" x 3" aluminum
bar stock and features black anodized finish.
Maximum bench overhang from middle of pedestal
must not exceed 6".
Note: Each pedestal shall be attached to top by screws Steel Heavy-Duty Aluminum Aluminum Moveable
and shall be anchored to floor by suitable anchors. Pedestals Pedestals Trapezoid Shape
Pedestals Pedestals
ALUMINUM BENCHES Aluminum
Pedestals
Anodized Aluminum Design
Rustproof, anodized aluminum is light, yet incredibly
strong and easy to maintain in almost any environment.
One piece bench stands are secured to pedestal base
with adjustable clamps. Rounded edges and center
traces provide comfortable, skid resistant seating. Use
as portable bench or install as a fixed position unit.
1-800-323-0082 | lyonworkspace.com 19
Top Closures
are used to close space between two tops when
obstruction prevents installation of a locker. Can be
furnished on flat or sloping tops.
LOCKER Flat Top Flat Top Slope Top Corner End Top
ACCESSORIES Closure Corner Filler (overlaps Closure
Filler lockers by 1")
Tops/Closures/End Panels
And Installation Details
End Cover Panel
End Finish Panel
Closure Strips Front Expansion Fillers
are used to fill space at ends and tops of are used to fill space between two locker fronts. Two
installation between lockers and wall or piece construction permits adjustment to fit space.
between two rows of lockers. Available for Fillers are also used to fill space between locker and
flat or slope top lockers. It is important to a wall. Flanged edge bolts to locker. See Installation
specify space to be closed for proper fit. details on page 21.
Top Expandable Filler at
Closure Front Filler wall
Strip
Standard Sidesheet End Panels
are easily installed on End
exposed ends of lockers Closure
for increased durability Strip
and an enhanced
appearance. Lyon offers Specify
optional heavy duty end space
panels (punched only between
as required) with all bolt lockers
heads exposed; end cover and wall
panels show only vertical
frame bolt heads. No bolt
heads are exposed on end
finishing panels.
Front Expansion Fillers
LOCKER SIDE
WALL #10 X 1/2" LOCKER SIDE #10 X 1/2" LOCKER SIDE #10 X 1/2" LOCKER SIDE
SHEET METAL SCREW SHEET METAL DOOR FRAME SHEET METAL SCREW
FEMALE SCREW DOOR DOOR
ERECTOR TO DRILL & HALF DOOR FRAME DOOR FRAME #10 X 1/2" FRAME
FURNISH FITTINGS FOR FEMALE SHEET METAL
ATTACHING EXPANSION HALF DOOR
SCREW
FILLER TO WALL
DOOR DOOR
MALE HALF WITH FLANGE AT TOP MALE HALF WITH FLANGE AT TOP LOCKER FRONT SCRIBE FILLER
SIZE AS SPECIFIED ON FLOOR PLAN SIZE AS SPECIFIED ON FLOOR PLAN SIDE
ERECTOR TO CUT IF NECESSARY ERECTOR TO CUT IF NECESSARY
TO SUIT SPACE BETWEEN LOCKERS TO SUIT SPACE BETWEEN LOCKERS DOOR
FRAME
PLAN SECTION OF FRONT EXPANSION FILLER AT WALL TYPICAL DETAIL OF FRONT EXPANSION FILLER
DOOR
PLAN SECTION OF FRONT SCRIBE FILLER
20 1-800-323-0082 | lyonworkspace.com
Recess Trim Recess Dimensions
Elevation showing joint between end and top recess trim and splice cap covering Length of recess = overall length
joint between two pieces of top finishing trim.
of lockers plus 2"
TOP FINISHING STRIP SPLICE CAP
2 3/4" 2 3/4" Locker
sides
Depth of locker
Locker door Locker plus 1"
frames door
END FINISHING STRIP Planned section through recessed
lockers showing right and left-hand
end finishing strips.
Recessing Details
Vertical section through locker in recess showing recommended method of recessing.
See erection instructions or shop drawings for specific locker anchoring details.
SUBMITTED BY: LOCKER SIDE 3/8" THIS DOCUMENT IS CONFIDENTIAL AND
END WALL PROPRIETARY. NO PART OF THIS
#10 X 1/2" SHEET 2 3/4"
METAL SCREW TOP FINISHING DOCUMENT MAY BE DISCLOSED IN ANY
MANNER TO A THIRD PARTY WITHOUT THE
DOOR FRAME STRIP PRIOR WRITTEN CONSENT OF LYON L.L.C.
16 GA. TOP FRONT WALL FACE 8/2017
FRAME MEMBER
TOP OF FURRING LOCKER DOOR LOCKER
BOTTOM
DOOR TOP OF FURRING TO BOTTOM
LOCKER 1" MINIMUM FRAME MEMBER
7/16" TOP OF LOCKER
#10 X 1/2" SHEET
2 3/4" END FINISHING STRIP 1 1/4" METAL SCREW BOTTOM
FINISHING STRIP
SECTION THRU END FINISHING STRIP 2 3/4"
1/16"
SECTION THRU TOP FINISHING STRIP
BASE
SECTION THRU BOTTOM FINISHING STRIP
HOOD SUPPORTS AT HOODS ARE TO BE CUT TO FIT
APPROXIMATE 30" CENTERS LOCKER ROWS, AND COMPLETELY
ASSEMBLED WITH #10-24 x 3/8" TR.
12" HD. MACHINE SCREWS & NUTS
21" 18"15" BEFORE PLACING ON LOCKERS.
Individual 24" 12" DRILL HOOD & END, AND
Sloping Tops 24" 21" 18"15" ATTACH WITH #10 X 1/2"
are furnished on SHEET METAL SCREW
lockers with full
height side panels END CAP
and backs.
CUT HOOD AS
12" REQUIRED AT (1)
24" 21" 18"15" END OF EACH ROW.
EITHER RIGHT OR
LEFT HAND END
MAY BE CUT
HOOD END
Sloping Top Slope Top
Sheet Metal Screw Locker Back
(6) #10-24 x 3/8"
Mach. Screws
Around Outside
Edge Of Top
Sloping Side
Continuous Sloping Hoods
fmlaotutnotpoloncokneersoCF. rOORmNTSoINIrNeUGOsLUtEaSRnSOdLWaOrPdLIONCGKHEOROSD
LOCKER SLOPING TOP
1-800-323-0082 | lyonworkspace.com 21
END FINISHING END CLOSURES ATTACHED THRU
STRIP REAR CONSTRUCTION HOLES
FRONT SCRIBE
FILLER
#10 X 1/2" SHEE
METAL SCREW
INSTALLATION OF TOP AND END CLOSURE STRIP
LOCKEREND RECESS TRIM WITH InneWrITFHCRSOLoNOTrPSnINCGeRTIrBOEPTFOIiLReLEHROAOnD gles a finished look BOLT CORNER FILLER TOGETHER ERECTOR TO DRILL SLOPING
Inner Corner Tie Angles provide TOP OR HOOD & ATTACH
SLOPING TOP OR HOOD and tieBEFbOaREnINkSTsALtLoATgIONether SLOPING TOP CORNER FILLER
INSTALLATION OF SLOPING END TOP CLOSURfoErSlong-term stability. W/ #10 X 1/2" SHEET METAL
SCREW
ACCESSORIES SLOPING TOP LOCKER
Inner Corner Tie Ends, OR HOOD INNER CORNER
Closure Layout TIE ANGLE MAL
LOCKER ERE
#10 X 1/2" SHEET INSTALLATION OF FRON
METAL SCREW
and installation details ATTACH ANGLE TO THE LOCKER GROUP
AT RIGHT THRU THE LOCKER
LOCKER INNER CORNER LOCKER CONSTRUCTION HOLES W/ 3 #10 X
TIE ANGLE 1/2" SHT. MTL. SCREWS. ATTACH ONE
NEAR THE TOP, CENTER & BOTTOM.
SLIDE THE GROUP INTO POSITION WITH
THE GROUP AT THE LEFT AND ATTACH
THE ANGLE TO THE GROUP THRU THE
CONSTRUCTION HOLES AS DONE
PREVIOUSLY USING 3 #10 X 1/2"
SHT. MTL. SCREWS. MAKE SURE THE
UNITS ARE PLUMB.
INSTALLATION OF SLOPING TOP CORNER FILLER
INSTALLATION OFSAHTITTNA. MCNHTLEE. NSRCDRFCEIWNOISSHROINNNEGENPEARANRETTLOSIEWP, C/A6ENN#T1GE0RXL&1E/2"
BOTTOM THRU FRONT & REAR CONSTRUCTION HOLES.
Outside Slope for Top and Corner
Outside Slope Top Corners provide a finished look
and merge two sections of sloped hood at the end.
SINGLE ROW DOUBLE ROW
INSTALLATION OF INNER CORNER TIE ANGLE ERECTOR TO DRILL SLOPING TOP BOLT CORNER FILLER TOGETHER INSTALLATION OF END FINISHING PANELS
OR HOOD & ATTACH SLOPING TOP BEFORE INSTALLATION
CORNER FILLER WITH #10 X 1/2" CONTINUOUS HOOD
SHEET METAL SCREW OR SLOPING TOP
INSTALLATION OF Inside Slope for Top and Corner
OUTSIDE CORNER FILLER Inside Slope Top Corners provide a finished look and
close corner gaps where two lockers meet.
BOLT CORNER FILLER TOGETHER ERECTOR TO DRILL SLOPING
BEFORE INSTALLATION TOP OR HOOD & ATTACH
SLOPING TOP CORNER
CONTINUOUS HOOD FILLER WITH #10 X 1/2"
OR SLOPING TOP SHEET METAL SCREW
INSTALLATION OF SLOPING
TOP CORNER FILLER
22 1-800-323-0082 | lyonworkspace.com
Standard Louver Arrangements Standard top Standard top Two louvers Center
See Specifications on page 5 for louver sizes. and bottom and bottom top and louvers on
Unless you specify an optional louver/ louvered door louvered bottom on multiple tier
perforation arrangement, you will double three tier lockers
automatically receive the standard louver tier door lockers
arrangement pictured below for the
appropriate locker style ordered.
Optional Diamond Perforations Optional Mini Louver Arrangements Optional Louver Arrangements
Diamond shaped perforations provide thorough Mini-louvers provide a clean, contemporary look, and provide ventilation
ventilation, and allow quick inspection of locker with increased security by eliminating visibility of locker contents. NOTE: Perforated sides, backs, tops,
contents without opening doors. bottoms and intermediate bottoms are also
available.
DP-1 DP-2 DP-3 DP-4 DP-6 MF-1 MF-2 MF-3 MF-4 MF-5 MS-1 MS-2 No louvers Fully louvered
Single tier door
Bottom Options are Locker Legs add 6" Galvannealed Lockers Coat Hooks Galvanized Coat
reinforced galvannealed, to overall locker height. are for installations in high are zinc plated Rods are made of 5⁄8"
stainless (not painted) and Must be specified on corrosive atmospheres. steel rod stock diameter galvanized
HDPE. initial order. Lockers are fabricated from with ball points steel. Use in place of
galvannealed steel and have for snag free use. double-prong ceiling
standard powder coat finish. hooks.
Aluminum Number Plates Lock Options can be used with all handles, and retrofitted to existing installations.
with clearly etched numbers are
2-3⁄4"w x 1"h, fit pre-punched holes
in locker doors.
1-800-323-0082 | lyonworkspace.com 23
LOCKER Anchoring Angle Locker Foot
ANCHORING For Lockers For Lockers with legs
without legs use a locker When backs are exposed
Floor Anchoring/Bases anchoring angle (running from front to rear on the (free standing) a locker
inside bottom of the locker) providing a bearing sur- foot is recommended for all
Anchoring face for the fasteners which are connected to the floor locker legs. When backs are
or locker base. For the typical continuous row locker against a wall and suitably
Locker installation, order one locker anchoring angle for each wall anchored, locker feet are
end of a row, plus sufficient quantity to provide angles recommended on front legs
on 36" centers. On single row installations where only. For more details, see
backs are against a wall, lockers should be suitably assembly instructions packed
wall anchored as detailed in assembly instructions with lockers.
packed with lockers and below installation drawings.
No. 5872 - For 12"d lockers No. 5870
No. 5873 - For 15"d lockers
No. 5874 - For 18"d lockers
No. 5875 - For 21"d lockers
— (Anchor)
Anchor
approximately
every third
locker
Closed Style Bases fit in the 6" high spaces between legs when furnished.
They provide finished appearance and facilitate cleaning.
ANCHOR TO WALL
ON 36" CENTERS
(150# PULLOUT VALUE)
FRONT BASE SNAPS END BASE SLIDES
INTO FRONT LEGS ON FROM BOTTOM
CLOSED BASES FOR SINGLE
ROW LOCKERS WITH LEGS
24 1-800-323-0082 | lyonworkspace.com
“Z” Type Bases offer added toe space and ANCHOR TO WALL ON 36" CENTERS
effective support using rugged 14-gauge (150# PULLOUT VALUE)
steel. Adds 4" to overall locker height.
LEGS ON 36" CENTERS
EXCEPT EXPOSED ENDS
W/ #10-24 X 1 1/2" SLOTTED ANCHOR ON 36" MAX.
CENTERS TO EACH OTHER
"Z" BASE W/ CLOSED ENDS ASSEMBLY
FOR SINGLE ROW LOCKERS (150# PULLOUT VALUE)
TRUSS HD. MACHINE SCREW
E-Z Bases Continuous added ANCHOR TERVUESRSY H36D".MMAAXC.HINE SCREW AND KWE/PA#1NN0CU-2HT4OXR1E1V/E2R" SYL2O4T"TMEADX.
base support with toe room.
Standard at 4" High. ANCHOR TO WALL "Z" BASE W/ CLOSED ENDS ASSEMBLY
ON 36" CENTERS FOR DOUBLE ROW LOCKERS
END BASE
MEMBER (150# PULLOUT VALUE)
FRONT BASE FASTEN END
MEMBER BASE MEMBER
TO REAR LEG
36" MAX LENGTH
#10-24 x 3/8"
MACHINE SCREW
& HEX NUT (TYP)
E-Z BASE ASSEMBLY
FOR SINGLE ROW LOCKERS
“Kitchen Cabinet Style” Bases are 4" high, and give a smooth, ANCHOR TO WALL
unbroken appearance to lockers without legs. ON 36" CENTERS
REAR BASE MEMBER (150# PULLOUT VALUE)
END BASE ANCHOR
MEMBER ANGLE
FRONT BASE
MEMBER
36" MAX LENGTH
#10-24 x 3/8"
MACHINE SCREW
& HEX NUT (TYP)
"KITCHEN CABINET STYLE BASE"
FOR SINGLE ROW LOCKERS
1-800-323-0082 | lyonworkspace.com 25
FINISH PREMIER POWDER COAT COLORS
GUIDE
Lyon’s Premier color selections and/or a computerized match to your custom color offer a
virtually endless combination of choices including two tone effects. Our preparation and finishing
procedures deliver a superior surface, highly resistant to deterioration and corrosion, to create a
lasting impression for your locker installation.
Note:
All color chips approximate the actual color as closely as possible. For a more precise color
match, request a free 601C color chart showing Lyon’s 34 premier colors.
Premier Colors by Lyon®
surface, highly resistant to chipping, cracking and corrosion, to create a
lasting impression for your locker installation.
AA Ash 4A Steel Blue 5F Wine Red 78 Sand 77 Stone Gray
6Y Brilliant Blue 3E Green Blue 6B Gray Beige 4B Ocean Blue X2 Antique Vellum
X3 Blue Streak X4 Verdant Green 3N Taupe WV Wood Violet WE Burgundy
EQ Midnight Blue BU Orange X6 Marine Blue IN Cosmos CD Minute Man Blue
M5 Red Velvet X7 True Navy NA Canyon H3 Hunter Green 11 Whitewash
PP Putty BB Wedgewood Blue DD Dove Gray KK Vulcan Black 74 Sunshine
9A Sepia Brown B6 Light Beige 7G Monorail Gray YF Red Baron
Note: • Additional charges apply for custom colors.
•
• All color chips are reproductions and approximate
the actual color as closely as possible.
Lyon ©2016
26 1-800-323-0082 | lyonworkspace.com
COMMITMENT TO THE ENVIRONMENT POSITIVELY
IMPACTING THE
Lyon is committed to developing products and programs that positively impact the ENVIRONMENT
environment. Whether the goal is creating a healthier environment, lowering operating
costs, reducing emissions or maintaining an environmentally friendly product delivery
system, Lyon is the clear cut leader in green initiatives within its industry.
Buying domestic steel (US steel) with recycle content and building locker, cabinet and
shelving solutions in our three manufacturing plants centrally located in the USA will
increase the LEED project ratings. Below is our recycled material content statement:
Lyon prides itself on being an organization that is environmentally responsible by using
environmentally friendly materials in our products and having environmentally sound
practices and procedures in the workplace.
Lyon’s products are manufactured from steel that contains a conservatively overall
estimated 53% recycled steel (36% post consumer and 17% pre consumer). Lyon
purchases steel from both integrated and mini mills throughout the United States.
In addition, our packaging materials are made from either recycled or recyclable
materials.
Lyon also participates in recycling programs with regard to our waste products generated
during the purchase and consumption of raw materials and the manufacture of
products in order to maintain our position as an environmentally friendly and responsible
organization. As an organization that takes pride in being sensitive to our environment,
Lyon continually works toward finding new ways to provide products to our customers
that are environmentally friendly and maintaining procedures in the workplace that also
do the same.
Further, Lyon has earned UL GREENGUARD Gold Certification.
Recognized and referenced by more than 400 codes, rating
systems, and procurement policies worldwide, the GREENGUARD
Certification requires that products meet some of the world’s most
rigorous and comprehensive limits for low emissions of volatile
organic compounds into indoor environments.
The GREENGUARD Gold standard includes health based criteria
for additional chemicals and also requires lower total VOC emissions levels to ensure
that products are acceptable for use in environments such as schools and healthcare
facilities.
Attaining GREENGUARD Gold Certification shows Lyon is serious about making a
commitment to the environment at all three of the production facilities. This certification
ensures that Lyon products contribute to healthy indoor environments.
To obtain this certification, Lyon underwent extensive testing and audits conducted
by UL Environment, one of the most renowned names in environmental testing and
certification.
1-800-323-0082 | lyonworkspace.com 27
THE STANDARD
OF EXCELLENCE
The familiar number plate on
each Lyon locker door has
represented a commitment to
quality and product innovation
for generations of students
and workers alike.
P.O. Box 671
Aurora, IL 60507-0671
Literature: 800-323-0096
Customer Service: 800-323-0082
Fax: 800-367-6681
email: [email protected]
lyonworkspace.com
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Lyon-2017-Locker-Specifiers-Guide
Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Lyon Lockers and storage
- 1 - 28
Pages: