Spec Master HP600 Series - Victor Technologies

Spec Master HP600 Series HPS600 Series

6.0 Nickel Plated Brass Barstock Regulator

Spec Master HP600 Series regulators
are intended for primary pressure gas
control of:

• Non-Corrosive
• High Purity gases (up to 6.0 Grade)

The Spec Master HP600 series regulators HPT600 Series
are intended for primary pressure gas control HPL600 Series
of non corrosive, high purity gases, up to 6.0
purity grade.

HPS600 Series –
Nickel Plated Brass Single Stage Regulator
for applications where slight pressure
variance in delivery pressure is acceptable
(as cylinder pressure decreases)
HPT600 Series –
Nickel Plated Brass Two Stage Regulator for
applications where constant pressure is required
(as cylinder pressure decreases)
HPL600 Series –
Nickel Plated Brass Line Regulator for gas
applications, for distribution systems (pipelines)

VictorSpecialtyGasControl.com

Spec Master HP600 Series

6.0 Nickel Plated Brass Barstock Regulator

HP600 Series

typical applications Body materials
Bonnet
Gas chromatography Seat Nickel Plated Brass Barstock
High purity carrier gases Diaphragm (regulator) Nickel Plated Brass Barstock
Zero, span and calibration gases Piston (regulator) PCTFE
Toxic and corrosive gases Seals 316L Stainless Steel
High purity chamber pressurization Filter Nickel Plated Brass
PTFE
10 Micron sintered 316L Stainless Steel

features specification

Six port configuration Maximum Inlet Pressure 60 bar (870 psig), 207 bar (3000 psig), 300 bar (4350 psig)*
Front and rear panel mounting capabilities Delivery Pressure Range psig
Encapsulated seat design Delivery Pressure Range bar 0-22 psig, 0-50 psig, 0-90 psig, 0-150 psig, 0-300 psig, 0-725 psig
Low wetted surface area Gauges
Full range of inlet and outlet fittings Ports 0-1.5 bar, 0-3.5 bar, 0-6 bar, 0-10 bar, 0-20 bar, 0-50 bar
Fitted pressure relief valve Temperature Range
(Single and Two stage regulators) Helium Leak Integrity 50mm (2") diameter stainless steel, snap-on tamper proof lens
Optional captured bonnet vent kit Flow Coefficient
1/4" NPT Female

-40º C to +60º C (-40 F to 140º F)

1 X 10-8 scc/sec

SGS / SGL SGT

Cv=0.094 Cv=0.078 (diaphragm regulator)

Cv=0.088 Cv=0.072 (piston regulator)

Ports 1/4" NPT Female
Weight
HPL600 1.0kg (2.2lb) / SGS600 1.1kg (2.5lb) / SGT600 1.5kg (3.5lb)
*Single and Two Stage regulators with no fitting fitted in to the regulator
HPL620 1.2kg (2.7lb) / SGS620 1.3kg (2.8lb) / SGT620 1.8kg (4.0lb)

dimensions

SINGLE STAGE REGULATOR

HP600 Series – Single Stage
diaphragm regulator with relief valve

two STAGE REGULATOR Int'l Customer Care: 1-940-381-1212
HP600 Series – Two Stage VictorSpecialtyGasControl.com
diaphragm regulator with relief valve

line REGULATOR
HP600 Series – Line regulator
with no relief valve

Page 2

Spec Master HP600 Series

6.0 Nickel Plated Brass Barstock Regulator

Flow performance

800
  Spec
 Master
 Single
 Stage
 HPS600
 Series
  Spec
 Master
 Line
 HPL600
 Series
 
750
  Flow
 (SCFH)
 vs
 PSIG
 Out
 @
 2000
 PSIG
 in
 -­‐
 Air
  Flow
 (SCFH)
 vs
 PSIG
 Out
 @
 500
 PSIG
 in
 -­‐
 Air
 
700
 
PSIG
 Out
  650
  PSIG
 OUT
 22
  PSIG
 Out
  160
  PSIG
 OUT
 22
 
600
  PSIG
 OUT
 50
  140
  PSIG
 OUT
 50
 
550
  PSIG
 OUT
 90
  120
  PSIG
 OUT
 90
 
500
  PSIG
 OUT
 150
  100
  PSIG
 OUT
 150
 
450
  PSIG
 OUT
 300
 
400
  PSIG
 OUT
 725
  80
 
350
  60
 
300
  1000
  2000
  3000
  4000
  5000
  6000
  7000
  40
  500
  1000
  1500
  2000
  2500
 
250
  20
 
200
 
150
  0
 
100
  0
 

50
  SCFH
 Air
 
0
 
0
 

SCFH
 Air
 

Spec
 Master
 Two
 Stage
 HPT600
 Series
  Spec
 Master
 Two
 Stage
 HPT600
 Series)
 
Flow
 (SCFH)
 vs
 PSIG
 Out
 @
 2000
 PSIG
 in
 -­‐
 Air
  Flow
 (SCFH)
 vs
 PSIG
 Out
 @
 500
 PSIG
 in
 -­‐
 Air
 

PSIG
 Out
  800
  PSIG
 OUT
 22
  PSIG
 Out
  160
  200
  400
  600
  800
  1000
  1200
  1400
  1600
  PSIG
 OUT
 22
 
750
  PSIG
 OUT
 50
  140
  SCFH
 Air
  PSIG
 OUT
 50
 
700
  PSIG
 OUT
 90
  120
  PSIG
 OUT
 90
 
650
  PSIG
 OUT
 150
  100
  PSIG
 OUT
 150
 
600
  PSIG
 OUT
 300
 
550
  PSIG
 OUT
 725
  80
 
500
  60
 
450
  500
  1000
  1500
  2000
  2500
  3000
  3500
  40
 
400
  20
 
350
 
300
  0
 
250
  0
 
200
 
150
 
100
 

50
 
0
 
0
 

SCFH
 Air
 

MODEL No. SELECTOR GUIDE

HPS600-03-05-03-03-102-01-FG

Product Inlet pressure delivery Inlet pressure delivery pressure inlet fittings outlet fittings options
Model pressure gauge unit gauge unit
HPS600 02 870 psi No Options
HPS620 03 3000 psi 02 0-22 psi 00 No Gauge 00 No Gauge 000 No Inlet Fittings 00 No Outlet Fittings A Bonnet Captured Vent Kit
04 4350 psi 03 0-50 psi 03 Bar/PSI 001 1/8" Compression Tube Brass 01 1/8" Compression Tube Brass F Helium Leak Test Certification
04 0-90 psi 03 Bar/PSI 003 1/4" Compression Tube Brass\ 03 1/4" Compression Tube Brass G Compliance Certificate
Plated Brass Plated Brass 08 1/4" NPT Male Brass Chrome Plated L Panel Mount Locking Nuts (2 units)
32 DRK Diffusion Resistant Shut-Off Valve 1/4" NPT Female Brass Chrome Plated M With Out Relief Valve
05 0-150 psi 008 1/4" NPT Male Brass Chrome Plated 33 DRK Diffusion resistant Shut-Off Valve 1/8" Tube Brass Chrome Plated N 300 & 725 psi delivery ranges are not fitted with Relief Valve
34 DRK Diffusion resistant Shut-Off Valve 1/4" Tube Brass Chrome Plated *
07 0-300 psi 089 CGA 170 Brass Chrome Plated 36 DRK Diffusion resistant Shut-Off Valve 1/4"NPT Male Brass Chrome Plated
39 Control Valve 1/4"NPT Brass Chrome Plated
10 0-725 psi 093 CGA 296 Brass Chrome Plated

095 CGA 320 Brass Chrome Plated

096 CGA 326 Brass Chrome Plated

097 CGA 330 Brass Chrome Plated

098 CGA 346 Brass Chrome Plated

099 CGA 350 Brass Chrome Plated

100 CGA 500 Brass Chrome Plated

101 CGA 510 Brass Chrome Plated

102 CGA 540 Brass Chrome Plated

103 CGA 555 Brass Chrome Plated

104 CGA 580 Brass Chrome Plated

105 CGA 590 Brass Chrome Plated

109 CGA 992 Brass Chrome Plated

Rules: HPS600 1) Model number for delivery pressures up to 150 psi

HPS620 1) Model number for 300 and 725 psi delivery pressure

HPS600 & HPS620 1) Inlet Pressure of 4350 psi (option 4) only available with no inlet fitting (option 00 - inlet fittings) and option N (with out relief valve - options) not available





U.S. Customer Care: 1-800-569-0547
Page 3
Canada Customer Care: 1-905-827-4515

Spec Master HP600 Series

6.0 Nickel Plated Brass Barstock Regulator

MODEL No. SELECTOR GUIDE

HPT600-03-05-03-03-102-01-FG

Product Inlet pressure delivery Inlet pressure delivery pressure inlet fittings outlet fittings options
Model pressure gauge unit gauge unit

HPT600 02 870 psi 02 0-22 psi 00 No Gauge 00 No Gauge 000 No Inlet Fittings 00 No Outlet Fittings A No Options
HPT620 03 3000 psi 03 0-50 psi 03 Bar/PSI 001 1/8" Compression Tube Brass 01 1/8" Compression Tube Brass F Bonnet Captured Vent Kit
04 4350 psi 04 0-90 psi 03 Bar/PSI 003 1/4" Compression Tube Brass\ 03 1/4" Compression Tube Brass G Helium Leak Test Certification
Plated Brass Plated Brass

05 0-150 psi 008 1/4" NPT Male Brass Chrome Plated 08 1/4" NPT Male Brass Chrome Plated L Compliance Certificate

07 0-300 psi 092 CGA 280 Brass Chrome Plated 32 DRK Diffusion Resistant Shut-Off Valve 1/4" NPT Female Brass Chrome Plated M Panel Mount Locking Nuts (2 units)

10 0-725 psi 093 CGA 296 Brass Chrome Plated 33 DRK Diffusion resistant Shut-Off Valve 1/8" Tube Brass Chrome Plated N With Out Relief Valve

095 CGA 320 Brass Chrome Plated 34 DRK Diffusion resistant Shut-Off Valve 1/4" Tube Brass Chrome Plated * 300 & 725 psi delivery ranges are not fitted with Relief Valve

096 CGA 326 Brass Chrome Plated 36 DRK Diffusion resistant Shut-Off Valve 1/4"NPT Male Brass Chrome Plated

098 CGA 346 Brass Chrome Plated 39 Control Valve 1/4"NPT Brass Chrome Plated

099 CGA 350 Brass Chrome Plated

100 CGA 500 Brass Chrome Plated

102 CGA 540 Brass Chrome Plated

103 CGA 555 Brass Chrome Plated

104 CGA 580 Brass Chrome Plated

105 CGA 590 Brass Chrome Plated

109 CGA 992 Brass Chrome Plated

Rules: HPT600 1) Model number for delivery pressures up to 150 psi
HPT620 1) Model number for 300 and 725 psi delivery pressure
HPT600 & HPS620 1) Inlet Pressure of 4350 psi (option 4) only available with no inlet fitting (option 00 - inlet fittings) and option N (with out relief valve - options) not available


MODEL No. SELECTOR GUIDE

HPL600-03-02-00-03-000-01-FG

Product Inlet pressure delivery Inlet pressure delivery pressure inlet fittings outlet fittings options
Model pressure
gauge unit gauge unit
HPL600
03 3000 psi 02 0-22 psi 00 No Gauge 00 No Gauge 000 No Inlet Fittings 00 No Outlet Fittings A No Options
HPL620 03 0-50 psi 001 1/8" Compression Tube Brass 01 1/8" Compression Tube Brass F Bonnet Captured Vent Kit
04 0-90 psi 03 Bar/PSI 003 1/4" Compression Tube Brass 03 1/4" Compression Tube Brass G Helium Leak Test Certification
Plated Brass

05 0-150 psi 008 1/4" NPT Male Brass Chrome Plated 08 1/4" NPT Male Brass Chrome Plated L Compliance Certificate

07 0-300 psi 093 CGA 296 Brass Chrome Plated 32 DRK Diffusion Resistant Shut-Off Valve 1/4" NPT Female Brass Chrome Plated M Panel Mount Locking Nuts (2 units)

10 0-725 psi 095 CGA 320 Brass Chrome Plated 33 DRK Diffusion resistant Shut-Off Valve 1/8" Tube Brass Chrome Plated * All line regulators are supplied with no relief valve fitted

096 CGA 326 Brass Chrome Plated 34 DRK Diffusion resistant Shut-Off Valve 1/4" Tube Brass Chrome Plated

097 CGA 330 Brass Chrome Plated 36 DRK Diffusion resistant Shut-Off Valve 1/4"NPT Male Brass Chrome Plated

098 CGA 346 Brass Chrome Plated 39 Control Valve 1/4"NPT Brass Chrome Plated

099 CGA 350 Brass Chrome Plated

100 CGA 500 Brass Chrome Plated

102 CGA 540 Brass Chrome Plated

104 CGA 580 Brass Chrome Plated

105 CGA 590 Brass Chrome Plated

109 CGA 992 Brass Chrome Plated

Rules: HPL600 1) Model number for delivery pressures up to 150 psi

HPL620 1) Model number for 300 and 725 psi delivery pressure





T E C H N O L O G I E S™
I n n o v a ti o n t o S h a p e th e W o r l d ™

U.S. Customer Care: 800-569-0547 • Canada Customer Care: 905-827-4515 • International Customer Care: 940-381-1212

Form No. 65-1408 (06/23/14) © 2014 Victor Technologies International, Inc. VictorTechnologies.com Printed in U.S.A.