ORBIT CATTALOG

HOSE CLAMPS HOSE CLAMP CATALOG

SOLUTION PROVIDER

The first BSI Kitemark TM
certified hose clips outside of Europe

KM 647038
BS 5315:1991

02-211-0053 @Orbit-clips www.orbit-clips.com SCAN TO WEB
02-212-1639 Orbit Fastener Company Limited
[email protected] Orbit Hose Clamps Official Orbit Fastener Company Limited
Orbit Fastener Co.,Ltd. No.9 Sathorn Rd.Soi13, Yannawa,
Sathorn, Bangkok, Thailand 10120

©2020 Orbit Fastener Company Limited. All rights reserved.

EVERYWHERE FOR EVERYONE

1 INTRODUCTION CONTENTS 2

EVERYWHERE FOR EVERYONE HOSE CLAMP APPLICATION

To be the market leader in clamping solutions for Southeast Asia market. Since 1957, ”Orbit hose clamps” have been widely used in various applications worldwide. We are manufacturer, we understand how
ORBIT has been developing the product to cover 4 industries. is it important to reduce the downtime for each of the industries, hence, our R & D team working assiduously to designed clamps
that most suit specific industries. “Orbit Hose Clamps” have proven to be "Leak Proof" under a controlled environment.
ORBIT ORIGINAL
Orbit hose clamps” has set a "Gold Standard" in the Hardware Distribution market for
more than 60 years. Our products supply to more than 40 countries and have more
than 300 distributors worldwide.

Orbit Infrastructure is a new addition to our product portfolio. It contains a series of ORBIT INFRASTRUCTURE
products that specially made for construction and water treatment and the HVAC
market. We choose our material carefully to make sure all products are meeting most ORBIT INDUSTRIAL
building standards in the world.
ORBIT OEM
“Orbit Hose Clamps” are designed in mind to build a durable and high-performance
product that exceeds various industrial standards. Orbit honor to the specification
published in our catalogue and website unless there is a specific requirement to
change specific material according to customer request.

ORBIT welcome collaboration with OEM partners to custom made the “Best Clamping
Solution” for a specific system. Our R & D and factory facilities are capable to design
and produce the product according to customer requirements.

3 OUT MILESTONES ABOUT US 4

OUR MILESTONES Original CONTENTS
Industrial
1st Product Infarstructure Page
Tools
Tier Automotive ORBIT OBBS (ZINC PLATED) 9
1995 Exported to Japan Market KM 647038 Supplier ORBIT OBBS (STAINLESS STEEL W2-W5) 11
1996 Exported to Europe BS 5315:1991 ORBIT GRIP 13
ORBIT TORC (STAINLESS 430) 15
ISO 9001:2015 ORBIT DRIVE SERIES 17
CERTIFIED ORBIT HEAVY DUTY 19
ORBIT CONSTANT TENSION 21
2016 Exported to North ORBIT T-BOLT CLIPS 23
America ORBIT QUICK RELEASE 25
ORBIT BAND AND BUCKLE 26
1957 1985 2012 2015 2018 ORBIT THUMB SCREW (W1/W4) 27
ORBIT THUMB SCREW WITH PVC (W1/W4) 28
1995 2016 2020 ORBIT MINI CLIPS 29
ORBIT THROBBING CLAMP 30
ORBIT ORBIT FASTENER CO., LTD IATF 16949 ORBIT MULTIBAND HOSE CLIPS 31
WAS FIRST WAS ESTABLISHED CERTIFIED ORBIT EAR ADJUSTABLE CLAMP 32
ESTABLISHED ORBIT TWO EAR CLAMP 33
IN THE UK ORBIT STEPLESS EAR CLAMP 35
ORBIT SPRING CLAMP 37
ORBIT INTERNATIONAL 2012 3rd Tier Automotive Supplier ORBIT WIRE CLIPS (ZINC PLATED) 39
CORPORATION LTD WAS 2012 supplied to White Good ORBIT P-CLIPS 41
ESTABLISHED IN THAILAND 2013 industries ORBIT SWP GRIP 43
First in house R&D ORBIT SWP OPEN FLEX 1R 45
product : T Bolt hose clamps ORBIT SWP OPEN FLEX 2R 47
ORBIT DWV 49
ABOUT US KM 647038 ORBIT PIPE REPAIR CLAMP 50
BS 5315:1991 ORBIT PIPE HANGER 51
ORBIT has been a well-known brand of hose clamp in ORBIT SWIVEL RING HANGER 53
world markets for more than 60 years. It was estab- ORBIT CLEVIS HANGER 54
lished in the UK in 1957 and since then has been well ORBIT U BOLT 55
known for its reliability and high quality. In 1985, Orbit ORBIT BAND HANGER 56
has relocated all manufacturing facilities to Thailand. ORBIT RC CLAMP 57
Orbit could continue servicing existing customers in ORBIT OHM CLAMP 58
Europe and furthermore develop new markets through- ORBIT LEVEL PIPE CLAMP 59
out the ASEAN region and subsequently, the World. ORBIT DUCT CLAMP 60
In 2016, ORBIT FLEXIBLE CLAMP - B 61
we are the first BSI Kitemark™ certified hose clamp ORBIT RC CLAMP - B 62
manufacturer in Asia. ORBIT RC CLAMP - C 63
ORBIT SPRING CLAMP PLIER 64
In 2019 we are IATF 16949 certified for automotive ORBIT FLEXIBLE SPRING CLAMP PLIER 64
industries. We are accepted and distributed to various ORBIT EAR CLAMP PLIER 64
industries including hardware, tooling, agricultur- ORBIT FLEXIBLE SHAFT SCREWDRIVER 50 CM  WITH SOCKET 65
al, ORBIT FLEXIBLE SHAFT SCREWDRIVER WITH SOCKET 65
RATCHET AND SOCKET SET 65
DIGITAL TORQUE WRENCH 66
BANDING TOOL 66
ORBIT CLAMPS KIT 67

5 CLAMP ENGINEERING CLAMP ENGINEERING 6

ORBIT CLAMP ENGINEERING 8 Sector Clamping Force Test Hose clamp performance is not determined only by high
@ 6.8 Nm destructive torque or high corrosion resistance, but
rather if there is no leakage after being installed.
Worm drive hose clamp employ worm gear system to Please note that International standard for hose ORBIT OBBS W1 Europe Brand X
tighten a hose. Therefore, it is critical that both parts, clamp indicates maximum destructive torque and Europe Brand Y USA Brand Z To ensure zero leakage, all related components must be
band serration and screw thread, work together flawlessly recommended tightening torque for each diameter. Not considered including hose material, pressure, type of
to ensure low friction and high performance. It mainly only that we follow the standard strictly, but ORBIT hose F8 [N] F1 [N] F2 [N] pipe connector and including fluid property.
depends on 4 components which are band, screw clamp also perform above industry standard. F7 [N] 2500
thread, house geometry and band tension. 2000 F3 [N] Over tightening does not ensure zero leakage, because
We are proud to be the first BS Kitemark certified hose 1500 not only it could damage hose, but also damage hose
Orbit hose clamp are manufactured according to BS clamp outside Europe. Our product and tested and certi- 1000 connector especially if it is made from plastic.
5315:1991 standard and our material are special cold fied by the British Standard Institute of United Kingdom
rolled steel with cold press forming. Solid band forming (BSI). Our products are tested in aspect of pressure test, 500 Each Orbit clamp has high engagement area between
provide higher band tension compare to normal perforated free torque test, destructive torque test, corrosion test 0 the screw thread and the band. which results in the less
hose clamp. Our design provides more smooth contact and band tension test. friction while tightening.
surface which ensures low friction in the system and F6 [N] F4 [N]
can achieve high tightening torque and sealability. Should you have any question about installation, The less friction in the system, the higher output and better
please feel free to contact us F5 [N] hose clamps performances.

Salt Spray Test Tension Test (N)

ORBIT Brand X Brand Y

Brand X W5 Force (N) 6,000
W4 5,000
Brand Y 500 1000 W3 4,000
Hours W2 3,000
Orbit W1 2,000
OBBS 1500 1,000

0 0

Free Running Torque & Tension Test (N)
Destruction Torque Test (Nm)

ORBIT Brand X Brand Y

Free Running Torque (Nm) 25
Destruction Torque (Nm)
Pressure (Bar) 20

Torque (Nm) 15 15
10
10
5
0 5

ORBIT 0
3 4 56

Brand X Brand Y Tightening Torque (Nm)

Remark
Hose clamp size : 3X
Media : Water
Hose Type : Nylon Embedded PVC
Environment : LAB

7 INSTALLATION MATERIAL AND SIZING CROSS REFERENCE 8

INSTALLATION MATERIAL AND SIZING
CROSS REFERENCE

We provide different material of hose clamp for each specific application which material selection is as in the table below.

To choose correct type of hose clamp, user can consider DIN AISI SAE Japan Corrosion Application
5 factors as follow: (S.T.A.M.P.) 144 Hrs Household
W1 Zinc Plated Steel 144 Hrs Automotives, Mechanical Equipment
S (Size) ID/ OD/ Hose thickness 400 Hrs Automotives, Original Equipment
T (Temperature) Min Max working Temperature W2 House / Band from 430 with zinc plated screw 500 Hrs Industrial, Automotives
A (Application) Indoor/ Outdoor/ Type of hose 1000 Hrs Ship Building, Marine industies
M (Material) Hose material W3 1.4016 430 51430 SUS 430
P (Pressure) Working Pressure/ Burst pressure
W4 1.4301 304 30304 SUS 304
Choose hose with ID smaller than pipe fitting OD.
When hose is fitted into the pipe, hose ID should W5 1.4571 316 30316 SUS 316
expand to fit the pipe properly and hose clamp will
be used to tight the connection as in the picture. BS SAE DIN
Recommended hose thickness should be around 3-4
mm. BS Size Clamping Range Bandwidth SAE Size Clamping Bandwidth Din Size Clamping Range Bandwidth
(mm) (mm) Range (mm) (mm) (mm)
Choose the right hose clamp diameter. If hose clip’s
size is too big compare to hose’s OD, protrude part will 12 OOO 9.5 -12 9.5 3 6 - 13 7.9 12 8 - 12 9.5
be too long and not only it could cause accident, but it 16 MOO 11 -16 9.5 4 8 - 16 7.9 16 10 -16 9.5
could also leak due to improper installation too. 8 - 19 7.9
Please avoid installing bigger hose clamp to a much 20 OO 13 - 20 5 8 - 22 7.9 20 12 - 20 9.5
smaller pipe. 9.5 6
21 OOX 16 - 21 10 - 22 12.7 22 12 - 22 9.5/12.2
It is best to use hose-to-pipe connector, hose nipple Precised forming between serration, screw, 22 O 16 - 22 12.2 6
or hose barb for installation. Avoid installing hose to and housing allow smooth and low tightening 12.2 11 - 25 7.9/12.7 27 16 - 27 9.5/12.2
a cut pipe with smooth surface which will provide low force, while allow high destructive torque. 25 OX 18 - 25 13 - 27 7.9/12.7
pull-off force. 8 13 - 32 32 20 - 32 9.5/12.2
Clamping performance is determined 30 1A 22 - 30 12.2 10 14 - 32 12.7
Consider installing 2 hose clips for critical application by radial clamping force from all direction 35 1 25 - 35 18 - 38 7.9 40 20 - 32 9.5/12.2
if space provided. Hose clamp size = Pipe OD + (2x Hose thickness) 40 1X 30 - 40 12.2 12 19 - 44 7.9/12.7 45 25 - 40 9.5/12.2
45 1M 35 - 45 12.2 12 25 - 51 7.9/12.7 50 30 - 45 9.5/12.2
Install hose clips in the middle of hose fitting with 50 2A 35 - 50 12.2 16 32 - 57 12.7
about ¼ inch space from hose edge. 55 2 40 - 55 12.2 20 38 - 63 12.7 60 40 - 60 9.5/12.2
60 2X 45 - 60 12.2 24 19 - 70 12.7
For thick wall hose or hose will high shore hardness, 70 3 55 - 70 12.2 28 26 - 76 12.7 70 40 - 60 9.5/12.2
please consider using heavy duty hose clamp 12.2 32 32 - 82 12.7
instead. 80 3X 60 - 80 12.2 36 38 - 89 12.7 80 60 - 80 9.5/12.2
Choose proper installation tool with 7 mm. hexagon 44 - 95 12.7
screw head and tightening within recommend tightening 90 4 70 - 90 40 51 - 101 12.7 90 60 - 80 9.5/12.2
torque to avoid damaging the hose. ORBIT Flexi screw 12.2 44 57 - 108 12.7
driver is recommended for narrow space installation. 100 4X 85 - 100 64 - 114 12.7 100 80 - 100 9.5/12.2
12.2 48 76 - 127 12.7
120 5 90 - 120 89 - 140 12.7 110 90 - 110 9.5/12.2
12.2 52 102 - 152 12.7 120 100 - 120 9.5/12.2
125 6 100 - 125 56 114 - 165 12.7 130 110 - 130 9.5/12.2
140 6M 120 - 140 127 - 178 12.7 140 120 - 140 9.5/12.2
150 6X 130 - 150 12.2 60 140 - 190 12.7 150 130 - 150 9.5/12.2
160 7 130 - 160 64 146 - 197 12.7 160 140 - 160 9.5/12.2
180 8 150 - 180 152 - 203 12.7
12.2 72 165 - 216 12.7 - - -
200 9 170 - 200 12.2 80 171 - 222 12.7 - - -
12.2 88 184 - 235 12.7 - - -
-- - 12.2 96 203 - 254 12.7 - - -
12.2 104 222 - 273 12.7 - - -
230 10 190 - 230 241 - 292 12.7 - - -
112 260 - 311 12.7 - - -
250 11 220 - 250 12.2 116 12.7 - - -
- - - - -
280 12 240 - 280 120 292 - 343 - - -
298 - 349 12.7 - - -
300 13 270 - 300 - 128 318 - 368 12.7 - - -
330 14 290 - 330 336 - 387 12.7 - - -
12.2 132 355 - 406 12.7 - - -
-- - 140 391 - 441 12.7 - - -
-- - 457 - 508 12.7 - - -
360 15 320 - 360 12.2 152 489 - 540 12.7 - - -
380 16 350 - 380 585 - 636 12.7 - - -
-- - 12.2 164 761 - 812 12.7 - - -
-- - 176 818 - 869 12.7 - - -
-- - 868 - 919 12.7 - - -
-- - 12.2 188 12.7 - - -
-- - 12.2 - - - -
-- - - - -
-- - - 208
-- -
- 212

12.2 224

12.2 236

- 248

- 270

- 312

- 332

- 390

- 502

- 538

- 569

9 PRODUCT CATALOG PRODUCT CATALOG 10

ORBIT OBBS Size and Diameter Dimension (mm) Packing
(ZINC PLATED)
BS Size Old Size mm Inches ab Ls Hex PU IC
ORBIT OBBS are strictly manufactured according to BS
ORBIT ORIGINAL 5315 and has British Standard Kitemark™ approval. It is 12 OOO 9.5-12 3/8 - 1/2 9.5 12.3 19 0.93 7 100 1500 ORBIT ORIGINAL
design to optimize free torque and destructive torque. 7 100 2000
With thick and high tensile band, it provide greater band 16 MOO 11-16 7/16 - 5/8 9.5 12.3 19 0.93 7 100 2000
tension for high seal ability. Smooth inner band provides 7 100 1200
best hose surface protection. 20 OO 13-20 1/2 - 3/4 9.5 12.3 19 0.93 7 100 1200
7 100 1200
ORBIT Mild Steel Hose clamp W1 are available in following 21 OOX 16-21 1/2 - 13/16 12.2 14.65 24 0.93 7 100 1200
options; 7 50 1000
22 O 16-22 5/8 - 7/8 12.2 14.65 24 0.93 7 50 1000
• Yellow Chromate (Cr6) or Blue Chromate (Cr3) 7 50 1000
• Normal Serration or Full Serrations 25 OX 18-25 3/4 - 1 12.2 14.65 24 0.93 7 50 600
• Thumb screw with or without PVC cover 7 50 600
30 1A 22-30 7/8 - 1 1/8 12.2 14.65 24 0.93 7 50 600
CORROSION RESISTANCE 7 50 600
Salt Spray Testing > 144 hours for red rust formation. 35 1 25-35 1 - 1 3/8 12.2 14.65 24 0.93 7 50 600
7 25 300
40 1X 30-40 1 1/8 - 1 5/8 12.2 14.65 24 0.93 7 25 300
7 25 300
45 1M 35-45 1 3/8 - 1 3/4 12.2 14.65 24 0.93 7 25 300
7 25 300
50 2A 35-50 1 3/8 - 2 12.2 14.65 33 0.93 7 25 300
7 10 150
55 2 40-55 1 5/8 - 2 1/8 12.2 14.65 33 0.93 7 10 150
7 10 100
60 2X 45-60 1 3/4 - 2 3/8 12.2 14.65 33 0.93 7 10 100
7 10 100
70 3 55-70 2 1/8 - 2 3/4 12.2 14.65 33 0.93 7 10 100
7 10 50
80 3X 60-80 2 3/8 - 3 1/8 12.2 14.65 33 0.93 7 10 50
7 10 50
90 4 70-90 2 3/4 - 3 1/2 12.2 14.65 33 0.93 7 10 50

100 4X 85-100 3 3/8 - 4 12.2 14.65 33 0.93

120 5 90-120 3 1/2 - 4 3/4 12.2 14.65 33 0.93

125 6 100-125 4-5 12.2 14.65 33 0.93

ORBIT INDUSTRIAL 140 6M 120-140 4 3/4 - 5 1/2 12.2 14.65 33 0.93 ORBIT INDUSTRIAL

b L 150 6X 130-150 5 1/8 - 5 7/8 12.2 14.65 33 0.93
ØD
s h 160 7 130-160 5 1/8 - 6 1/4 12.2 14.65 33 1.0

Hex. 180 8 150-180 5 7/8 - 7 1/8 12.2 14.65 33 1.0

View of Materials 200 9 170-200 6 11/16 - 7 7/8 12.2 14.65 33 1.0
and Size
230 10 190-230 7 1/2 - 9 12.2 14.65 33 1.0

250 11 220-250 8 5/8 - 9 7/8 12.2 14.65 33 1.0

280 12 240-280 9 1/2 - 11 12.2 14.65 33 1.0

300 13 270-300 10 5/8 - 11 3/4 12.2 14.65 33 1.0

330 14 290-330 11 3/8 - 13 12.2 14.65 33 1.0

360 15 320-360 12 1/2 - 14 1/8 12.2 14.65 33 1.0

VIEW ISO 380 16 350-380 13 3/4 - 15 12.2 14.65 33 1.0

a

Material W1

PU : Packing Unit
IC : Industrial Carton

11 PRODUCT CATALOG PRODUCT CATALOG 12

ORBIT OBBS Size and Diameter Dimension (mm) Packing
(STAINLESS STEEL)
BS Size Old Size mm Inches ab Ls Hex PU IC
ORBIT OBBS (Stainless steel W2-W5) are strictly
manufactured according to BS 5315 and has British 12 OOO 9.5-12 3/8 - 1/2 9.5 12.3 19 0.8 7 10 2000
Standard Kitemark™ approval. It is design to opti- 9.5 12.3 19 0.8 7 10 2000
mize free torque and Destructive Torque. With thick 16 MOO 11-16 7/16 - 5/8 9.5 12.3 19 0.8 7 10 2000
high tensile band, it provide greater band tension for 12.2 14.65 24 0.8 7 10 2000
high seal ability. Smooth inner band provides best 20 OO 13-20 1/2 - 3/4 12.2 14.65 24 0.8 7 10 1200
hose surface protection. ORBIT OBBS stainless steel 12.2 14.65 24 0.8 7 10 1200
hose clamps are available in various type of material 21 OOX 16-21 1/2 - 13/16 12.2 14.65 24 0.8 7 10 1200
for different application from industrial use to marine 12.2 14.65 24 0.8 7 10 1000
application. Material are available from 430 stainless 22 O 16-22 5/8 - 7/8 12.2 14.65 24 0.8 7 10 1000
steel 304 18/8 stainless steel to 316 stainless steel. 12.2 14.65 24 0.8 7 10 600
25 OX 18-25 3/4 - 1 12.2 14.65 33 0.8 7 10 600
12.2 14.65 33 0.8 7 10 600
30 1A 22-30 7/8 - 1 1/8 12.2 14.65 33 0.8 7 10 600
12.2 14.65 33 0.8 7 10 300
35 1 25-35 1 - 1 3/8 12.2 14.65 33 0.8 7 5 300
12.2 14.65 33 0.8 7 5 300
40 1X 30-40 1 1/8 - 1 5/8 12.2 14.65 33 0.8 7 5 150
12.2 14.65 33 0.8 7 5 150
45 1M 35-45 1 3/8 - 1 3/4 12.2 14.65 33 0.8 7 5 150
12.2 14.65 33 0.8 7 5 150
50 2A 35-50 1 3/8 - 2/1 12.2 14.65 33 0.8 7 5 150
12.2 14.65 33 0.8 7 BULK 150
55 2 40-55 1 5/8 - 2 1/8 12.2 14.65 33 0.8 7 BULK 150
12.2 14.65 33 0.8 7 BULK 100
60 2X 45-60 1 3/4 - 2 3/8 12.2 14.65 33 0.8 7 BULK 100
12.2 14.65 33 0.8 7 BULK 100
70 3 55-70 2 1/8 - 2 3/4 12.2 14.65 33 0.8 7 BULK 100
12.2 14.65 33 0.8 7 BULK
b L 80 3X 60-80 2 3/8 - 3 1/8 12.2 14.65 33 0.8 7 BULK 50
ØD 12.2 14.65 33 0.8 7 BULK 50
ORBIT INDUSTRIALHex. 90 4 70-90 2 3/4 - 3 1/2 12.2 14.65 33 0.8 7 BULK 50
50
hView of Materials100 4X 85-100 3 3/8 - 4/1
and Size
120 5 90-120 3 1/2 - 4 3/4

125 6 100-125 4-5

140 6M 120-140 4 3/4 - 5 1/2 ORBIT INDUSTRIAL

150 6X 130-150 5 1/8 - 5 7/8

160 7 130-160 5 1/8 - 6 1/4

180 8 150-180 5 7/8 - 7 1/8

200 9 170-200 6 11/16 - 7 7/8

s 230 10 190-230 7 1/2 - 9/1
a
250 11 220-250 8 5/8 - 9 7/8

VIEW ISO 280 12 240-280 9 1/ - 11/1

300 13 270-300 10 5/8 - 11 3/4

330 14 290-330 11 3/8 - 13/1

360 15 320-360 12 1/2 - 14 1/8

380 16 350-380 13 3/4 - 15/1

Material W2 W3 W4 W5

PU : Packing Unit
IC : Industrial Carton

13 PRODUCT CATALOG PRODUCT CATALOG 14

ORBIT GRIP Bandwidth 12 mm

ORBIT Grip hose clamp is manufactured and tested according Size and Diameter Dimension (mm) Packing
to the German Standard DIN3017. It is developed to supply all
applications that require this German Standard specification Size mm Inches ab Ls Hex PU IC
(DIN3017). The price is comparable to W1 while the corrosion
resistance is better. Unlike other DIN clips in the market, 27 16-27 5/8 - 11/16 12 14.65 23.8 0.8 7 50 1000
ORBIT GRIP’s band thread is precisely cold formed which 32 20-32 3/4 - 1 1/4 12 14.65 23.8 0.8 7 50 1000
results in a smooth underside surface to optimize hose 40 25-40 1 - 1 5/8 12 14.65 23.8 0.8 7 50 1000
surface protection. 45 30-45 13/16-13/4 12 14.65 23.8 0.8 7 50 600
50 35-50 1 3/8 - 2 12 14.65 32.6 0.8 7 50 600
Bandwidth 9.5 mm 60 40-60 1 5/8 - 2 3/8 12 14.65 32.6 0.8 7 50 600
70 50-70 1 7/8 - 2 3/4 12 14.65 32.6 0.8 7 50 600
Size and Diameter Dimension (mm) Packing 80 60-80 2 3/8 - 3 1/8 12 14.65 32.6 0.8 7 50 600
90 70-90 2 3/4 - 3 1/2 12 14.65 32.6 0.8 7 25 300
Size mm Inches ab Ls Hex PU IC 100 80-100 3 1/8 - 4 12 14.65 32.6 0.8 7 25 300
110 90-110 3 1/2 - 4 3/8 12 14.65 32.6 0.8 7 25 300
12 8-12 5/16 - 1/2 9.5 12.3 20.4 0.8 7 50 2000 120 100-120 4 - 4 3/4 12 14.65 32.6 0.8 7 25 300
16 10-16 3/8 - 5/8 9.5 12.3 20.4 0.8 7 50 2000 130 110-130 4 3/8 - 5 1/8 12 14.65 32.6 0.8 7 25 300
20 12-20 1/2 - 3/4 9.5 12.3 20.4 0.8 7 50 2000 140 120-140 4 3/4 - 5 1/2 12 14.65 32.6 0.8 7 25 300
22 12-22 1/2 - 7/8 9.5 12.3 20.4 0.8 7 50 1200 150 130-150 5 - 5 3/4 12 14.65 32.6 0.8 7 25 300
25 16-25 5/8 - 1 9.5 12.3 20.4 0.8 7 50 1200 160 140-160 5 1/2 - 6 1/4 12 14.65 32.6 0.8 7 10 150
27 16-27 5/8 - 11/16 9.5 12.3 20.4 0.8 7 50 1000
32 20-32 3/4 - 1 1/4 9.5 12.3 23.8 0.8 7 50 1000 Material W1* W2 W3* ORBIT INDUSTRIAL
40 25-40 1 - 1 5/8 9.5 12.3 23.8 0.8 7 50 1000 PU : Packing Unit
45 30-45 13/16-13/4 9.5 12.3 23.8 0.8 7 50 600 IC : Industrial Carton
50 35-50 1 3/8 - 2 9.5 12.3 23.8 0.8 7 50 600 * W1, W3 made to order
60 40-60 1 5/8 - 2 3/8 9.5 12.3 23.8 0.8 7 50 600
70 50-70 1 7/8 - 2 3/4 9.5 12.3 27.5 0.8 7 50 600 Hex.
ORBIT INDUSTRIAL8060-80 2 3/8 - 3 1/8 9.5 12.3 27.5 0.8 7 50 600 L
90 70-90 2 3/4 - 3 1/2 9.5 12.3 27.5 0.8 7 25 300
h10080-1003 1/8 - 49.5 12.3 27.5 0.8725 300b
110 90-110 3 1/2 - 4 3/8 9.5 12.3 27.5 0.8 7 25 300
120 100-120 4 - 4 3/4 9.5 12.3 32.6 0.8 7 25 300 View of Materials
130 110-130 4 3/8 - 5 1/8 9.5 12.3 32.6 0.8 7 25 300 and Size
140 120-140 4 3/4 - 5 1/2 9.5 12.3 32.6 0.8 7 25 300
150 130-150 5 - 5 3/4 9.5 12.3 32.6 0.8 7 25 300 s VIEW ISO
160 140-160 5 1/2 - 6 1/4 9.5 12.3 32.6 0.8 7 10 150 a

15 PRODUCT CATALOG PRODUCT CATALOG 16

ORBIT TORC Size and Diameter Dimension (mm) Packing
(STAINLESS 430)
Size mm Inches ab Ls Hex PU IC
ORBIT Torc W3 is made entirely of 430 Stainless Steel
ORBIT ORIGINAL including banding, housing and screw, it is specially OOO 9.5-12 3/8 - 1/2 9.5 12.3 19 0.8 7 10 2,000 ORBIT ORIGINAL
designed to increase the destructive torque when MOO 11-16 1/2 - 5/8 9.5 12.3 19 0.8 7 10 2,000
compared to a normal hose clip. ORBIT TORC W3 is OO 13-20 1/2 - 3/4 9.5 12.3 19 0.8 7 10 1,200
suitable for high pressure pumps, turbo engines, fish- 16-22 5/8 - 7/8 12 14.65 24 0.8 7 10 1,200
ing boats, other industrial applications which need O 18-25 3/4 - 1 12 14.65 24 0.8 7 10 1,200
high torque with a medium requirement in terms OX 22-30 7/8 - 1 1/8 12 14.65 24 0.8 7 10 1,000
of corrosion resistance. 1A 25-35 1 - 1 3/8 12 14.65 24 0.8 7 10 1,000
1 30-40 1 1/8 - 1 5/8 12 14.65 24 0.8 7 10 1,000
ORBIT INDUSTRIAL b s L 1X 35-45 1 3/8 - 1 3/4 12 14.65 24 0.8 7 10 600 ORBIT INDUSTRIAL
h 1M 35-50 1 3/8 - 2 12 14.65 33 0.8 7 10 600
View of Materials ØD 2A 40-55 1 5/8 - 2 1/8 12 14.65 33 0.8 7 10 600
and Size 2 45-60 1 3/4 - 2 3/8 12 14.65 33 0.8 7 10 600
2X 55-70 2 - 2 3/4 12 14.65 33 0.8 7 5 300
a 3 50-75 12 14.65 33 0.8 7 5 300
3S 60-80 2-3 12 14.65 33 0.8 7 5 300
3X 70-90 2 3/8 - 3 1/8 12 14.65 33 0.8 7 5 300
4 85-100 2 3/4 - 3 1/2 12 14.65 33 0.8 7 5 150
4X 90-120 12 14.65 33 0.8 7 5 150
5 100-125 3 1/8 - 4 12 14.65 33 0.8 7 5 150
6 120-140 3 1/2 - 4 3/4 12 14.65 33 0.8 7 5 150
6M 130-150 12 14.65 33 0.8 7 5 150
6X 130-160 4-5 12 14.65 33 0.8 7 BULK 150
7 150-180 4 3/4 - 5 1/2 12 14.65 33 0.8 7 BULK 100
8 170-200 5 1/8 - 5 7/8 12 14.65 33 0.8 7 BULK 100
9 190-230 5 1/8 - 6 1/4 12 14.65 33 0.8 7 BULK 100
10 220-250 5 7/8 - 7 1/8 12 14.65 33 0.8 7 BULK 100
11 240-280 6 5/8 - 7 7/8 12 14.65 33 0.8 7 BULK 100
12
7 1/2 - 9
8 5/8 - 9 7/8
9 1/2 - 11

Material W3

PU : Packing Unit
IC : Industrial Carton

17 PRODUCT CATALOG Size and Diameter PRODUCT CATALOG 18

ORBIT DRIVE SERIES ORBIT ACCU DRIVE 300
Bandwidth 1/2" (12.7mm) | Hex Head 5/16“
ORBIT Drive Series are made and tested according to American standard
ORBIT ORIGINAL SAE J1508. It’s suitable for connecting a high pressure hose that Size and Diameter HEX Packing ORBIT ORIGINAL
requires high tightening torque. The perforation at the band tightens (inch)
the connection and attachment and provides a suitable pressure seal. a b hL t
Suitable for all applications.
SAE Size mm Inches PU IC

6 10-22 3/8" - 7/8" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 25 1000
0.6 7.9 (5/16 Inch) 25 450
Material 8 11-25 7/16" - 1" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 25 450
0.6 7.9 (5/16 Inch) 25 450
Band SS301 10 13-27 1/2" - 1 1/16" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 25 450
0.6 7.9 (5/16 Inch) 25 400
Housing SS301 12 13-32 1/2" - 1 1/4" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 25 400
0.6 7.9 (5/16 Inch) 25 400
Screw SS304 16 18-38 11/16" - 1 1/2" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 25 400
0.6 7.9 (5/16 Inch) 25 400
20 19-44 3/4" - 1 3/4" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 25 300
0.6 7.9 (5/16 Inch) 25 300
24 25-51 1" - 2" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 25 300
0.6 7.9 (5/16 Inch) 25 300
28 32-57 1 1/4" - 2 1/4" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 25 300
0.6 7.9 (5/16 Inch) 25 300
32 38-63 1 1/2" - 2 1/2" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 25 300
0.6 7.9 (5/16 Inch) 25 300
36 19-70 3/4" - 2 3/4" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 25 300
0.6 7.9 (5/16 Inch) 10 150
40 26-76 1" - 3" 12.7 14.7 10.4 26.8 0.6 7.9 (5/16 Inch) 10 150
0.6 7.9 (5/16 Inch) 10 150
44 32-82 1 1/4" - 3 1/4" 12.7 14.7 10.4 26.8

48 38-89 1 1/2" - 3 1/2" 12.7 14.7 10.4 26.8

52 44-95 1 3/4" - 3 3/4" 12.7 14.7 10.4 26.8

56 51-102 2" - 4" 12.7 14.7 10.4 26.8

60 57-108 2 1/4" - 4 1/4" 12.7 14.7 10.4 26.8

ORBIT INDUSTRIAL 64 64-114 2 1/2" - 4 1/2" 12.7 14.7 10.4 26.8 ORBIT INDUSTRIAL

ORBIT NANO DRIVE 300 72 76-127 3" - 5" 12.7 14.7 10.4 26.8
Bandwidth 5/16" (7.9mm) | Hex Head 1/4”
80 89-140 3 1/2" - 5 1/2" 12.7 14.7 10.4 26.8

88 102-152 4" - 6" 12.7 14.7 10.4 26.8

Size and Diameter HEX Packing 96 114-165 4 1/2" - 6 1/2" 12.7 14.7 10.4 26.8
(inch)
a b hL t PU IC 104 127-178 5" - 7" 12.7 14.7 10.4 26.8
6.35
SAE Size mm Inches 7.9 9.8 8.7 16.2 0.6 6.35 25 1000
7.9 9.8 8.7 16.2 0.6 6.35 25 1000
3 6-13 7/32" - 1/2" 7.9 9.8 8.7 16.2 0.6 6.35 25 1000 Additional sizes are available upon request according to the volume.
7.9 9.8 8.7 16.2 0.6 6.35 25 1000
4 8-16 5/16" - 5/8" 7.9 9.8 8.7 16.2 0.6 6.35 25 1000 PU : Packing Unit
7.9 9.8 8.7 16.2 0.6 6.35 25 450 IC : Industrial Carton
7.9 9.8 8.7 16.2 0.6 6.35 25 450
5 8-19 5/16" - 3/4" 7.9 9.8 8.7 16.2 0.6 6.35 25 450
7.9 9.8 8.7 16.2 0.6 25 450
6 8-22 5/16" - 7/8"

8 11-25 7/16" - 1"

10 13-27 1/2" - 1 1/16"

12 14-32 9/16" - 1 1/4"

16 18-38 11/16" - 1 1/2"

20 19-44 3/4" - 1 3/4"

Additional sizes are available upon request according to the volume.

19 PRODUCT CATALOG PRODUCT CATALOG 20

ORBIT HEAVY DUTY Size and Diameter Dimension (mm) Packing

ORBIT Heavy Duty Clamp W3 offering the highest tightening torques with Size mm Inches a bs Hex PU IC
special 8.8 stainless steel bolt and allow recommended torque of 25 Nm It
is specially designed to exceed DIN standard requirement with low free 19 17-19 11/16-3/4 18 20 0.8 8 25 200
torque and is suitable for a wide range of industrial applications. 21 19-21 3/4-13/16 18 20 0.8 8 25 200
23 21-23 13/16-7/8 18 20 0.8 8 25 200
Screw : 410 stainless steel bolt 25 23-25 18 20 0.8 8 25 200
Band : 430 stainless steel 27 25-27 7/8-1 18 20 0.8 8 25 200
Corrosion resistance: 144 hours 29 27-29 1-1 1/16 18 20 0.8 8 25 200
31 29-31 1 1/16-1 1/8 18 20 0.8 8 25 200
b T-Nut Trunion 34 31-34 1 1/8-1 1/4 18 20 0.8 8 25 200
Bridge U-Cup 37 34-37 1 1/4-1 5/16 18 20 0.8 8 25 200
M Band Collar 40 37-40 1 5/16-1 7/16 18 20 0.8 8 25 200
Hex.Bolt 43 40-43 1 7/16-1 9/16 18 20 0.8 8 25 200
47 43-47 1 9/16-1 11/16 20 22 0.8 10 20 100
Clamping ØD 51 47-51 1 11/16-1 7/8 20 22 0.8 10 20 100
55 51-55 1 7/8-2 20 22 0.8 10 20 100
ORBIT INDUSTRIAL s Isometric View 59 55-59 2-2 3/16 20 22 0.8 10 20 100 ORBIT INDUSTRIAL
a 63 59-63 2 3/16-2 5/16 20 22 0.8 10 20 100
68 63-68 2 5/16-2 1/2 20 22 0.8 10 20 100
Section A-A 73 68-73 2 1/2-2 11/16 25 27.5 1.0 13 5 100
79 73-79 2 11/16-2 7/8 25 27.5 1.0 13 5 100
Material W3 85 79-85 2 7/8-3 1/8 25 27.5 1.0 13 5 100
91 85-91 3 1/8-3 3/8 25 27.5 1.0 13 5 100
PU : Packing Unit 97 91-97 3 3/8-3 9/16 25 27.5 1.0 13 5 100
IC : Industrial Carton 104 97-104 3 9/16-3 13/16 25 27.5 1.0 13 5 100
112 104-112 3 13/16-4 1/8 25 27.5 1.0 13 5 100
121 112-121 4 1/8-4 7/16 25 27.5 1.0 13 5 100
130 121-130 4 7/16-4 3/4 25 27.5 1.0 13 5 100
140 130-140 4 3/4-5 1/8 30 32 1.2 16 5 50
150 140-150 5 1/8-5 1/2 30 32 1.2 16 5 20
162 150-162 5 1/2-5 7/8 30 32 1.2 16 5 20
174 162-174 5 7/8-6 3/8 30 32 1.2 16 5 20
187 174-187 6 3/8-6 7/8 30 32 1.2 16 5 20
200 187-200 6 7/8-7 3/8 30 32 1.2 16 5 20
213 200-213 7 3/8-7 7/8 30 32 1.2 16 5 20
226 213-226 7 7/8-8 3/8 30 32 1.2 16 5 20
239 226-239 8 3/8-8 7/8 30 32 1.2 16 5 20
252 239-252 8 7/8-9 3/8 30 32 1.2 16 5 20
265 252-265 9 3/8-9 15/16 30 32 1.2 16 5 20
278 265-278 9 15/16-10 7/16 30 32 1.2 16 5 20
291 278-291 10 7/16-10 15/16 30 32 1.2 16 5 20
304 291-304 10 15/16-11 7/16 30 32 1.2 16 5 20
317 304-317 11 7/16-12 30 32 1.2 16 5 20
330 317-330 112-12 1/2 30 32 1.2 16 5 20
12 1/2-13

21 PRODUCT CATALOG PRODUCT CATALOG 22

ORBIT CONSTANT TENSION Size and Diameter Dimension (mm) HEX Packing

ORBIT Constant Tension is a heavy duty clamp with Belleville spring Size mm Inches a b c L t (inch) PU IC
mechanism which allow clamp to automatically increase or
decrease its diameter due to change in operational temperature to 212 (MAX.) 0.7 3/8" 10 200
prevent “cold flow” leak. It has extra long liner to protect hose 262 0.7 3/8" 10 200
surface when tightened. ORBIT constant tension are manufac- 312 32 - 54 1 1/4 - 2 1/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 200
tured and tested according to SAE J1508. 362 45 - 67 1 3/4 - 2 5/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 200
412 57 - 79 2 1/4 - 3 1/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
462 70 - 92 2 3/4 - 3 5/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
512 83 - 105 3 1/4 - 4 1/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
562 95 - 117 3 3/4 - 4 5/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
612 108 - 130 4 1/4 - 5 1/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
662 121 - 143 4 3/4 - 5 5/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
712 133 - 155 5 1/4 - 6 1/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
762 146 - 168 5 3/4 - 6 5/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
812 159 - 181 6 1/4 - 7 5/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
862 172 - 194 6 3/4 - 7 1/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
912 184 - 206 7 1/4 - 8 1/8 15.9 (5/8") 12.6 7 36.5 0.7 3/8" 10 100
197 - 219 7 3/4 - 8 5/8 15.9 (5/8") 12.6 7 36.5
210 - 232 8 1/4 - 91/8 15.9 (5/8") 12.6 7 36.5
ORBIT INDUSTRIAL ORBIT INDUSTRIALCL
Hex (Inch)
Stamp Size b (MAX) t Housing
Spring
Screw Housing Base No. Material a

Band 01 BAND SS 301

Clamping ØD 02 Housing BASE SS 301

a 03 SCREW SS 410

04 Housing SS 304

05 SPRING SS 400

Material Stainless Series 300

PU : Packing Unit
IC : Industrial Carton

23 PRODUCT CATALOG PRODUCT CATALOG 24

ORBIT T-BOLT CLAMP Size and Diameter Dimension (mm) Packing

ORBIT T-Bolt is made from a 430 stainless steel band with a Size mm Inches a b Ls Hex PU IC
zinc plated T shaped bolt, while the T bush is made from an
ORBIT ORIGINAL aluminum zinc alloy. The T-Bolt clamp provide a uniform 39 35-39 1 3/8-1 1/2 20 22 70 0.8 10 20 200 ORBIT ORIGINAL
sealing pressure for a reliable seal with a narrow band width, 42 38-42 1 1/2-1 5/8 20 22 70 0.8 10 20 200
suitable for high pressure applications with thick hoses, or 46 41-46 1 5/8-1 3/4 20 22 70 0.8 10 20 200
turbo exhausting pipes. ORBIT T-Bolt W2 is available in 51 45-51 20 22 70 0.8 10 20 200
Grade W2. The Band and Bridge are made from 430 stain- 56 48-56 1 3/4-2 20 22 70 0.8 10 20 200
less steel and a zinc plated T Bolt screw. 59 51-59 1 7/8- 2 3/16 20 22 70 0.8 10 20 200
62 54-62 20 22 70 0.8 10 10 200
b m L 65 57-65 2-2 5/16 20 22 70 0.8 10 10 200
ØD 68 61-68 2 1/8-2 7/16 20 22 70 0.8 10 10 200
ORBIT INDUSTRIAL View of Materials Stamp Logo 71 64-71 2 1/4-2 9/16 20 22 70 0.8 10 10 200 ORBIT INDUSTRIAL
and Size s 75 67-75 2 3/8-2 11/16 20 22 70 0.8 10 10 200
78 70-78 2 1/2-2 13/16 20 22 70 0.8 10 10 200
a 81 73-81 2 11/16 - 2 15/16 20 22 70 0.8 10 10 200
84 76-84 2 3/4-3 1/16 20 22 70 0.8 10 10 200
87 80-87 2 7/8-3 1/4 20 22 70 0.8 10 10 200
90 83-90 20 22 70 0.8 10 10 200
94 86-94 3-3 5/16 20 22 70 0.8 10 10 200
97 89-97 3 1/8-3 7/16 20 22 70 0.8 10 10 200
100 92-100 3 1/4-3 1/2 20 22 70 0.8 10 10 200
103 95-103 3 3/8-3 11/16 20 22 70 0.8 10 5 100
110 102-110 3 1/2 - 3 13/16 20 22 70 0.8 10 5 100
116 108-116 3 5/8 - 3 15/16 20 22 70 0.8 10 5 100
122 114-122 3 3/4 - 4 1/16 20 22 70 0.8 10 5 100
129 121-129 4 1/16 -4 5/16 20 22 70 0.8 10 5 100
4 1/4 - 4 9/16
4 1/2-4 13/16
4 13/16 -5 1/16

Material W2

PU : Packing Unit
IC : Industrial Carton

25 PRODUCT CATALOG PRODUCT CATALOG 26

ORBIT QUICK RELEASE ORBIT BAND AND BUCKLE

ORBIT Quick Release Clamp are made from 430 fully serrat- ORBIT Band and Buckle is an adjustable clamping system
ed band to work with quick release buckles. It can clamp a which made from 304 stainless steel band. This material
hose quickly and unclamp easily. This is another ideal choice provides very good corrosion resistance in fresh water and
for fast installation suitable for various size of hose. Packaging industrial atmospheres. It can be used across a variety of
is specially designed to measure clamp circumference for industries and applications, such as Electrical, Hose Assem-
quick installation. bly, Signage, Automotive, Mining and food processing, chemi-
cal, power transmission and cable management.

ORBIT INDUSTRIAL Band Band ORBIT INDUSTRIAL
Thickness (s)
Bandwidth (a) mm Inch Weight Bandwidth Thickness Weight
mm Inch 0.6 0.023
Material 9 3/8" Packing kg lbs Material mm Inch mm Inch Packing kg lbs
SUS 403 Quick release 30 M/Roll 1.565 3.45 12.7 1/2 30 M/Roll 1.819 4.010
SUS 304 15.8 5/8 0.51 0.02 30 M/Roll 2.199 4.848
SUS 304 0.51 0.02
Packing
Bandwidth Weight Buckle 25 pcs/Box
mm Inch Thickness 25 pcs/Box
Material 9 3/8" HEX Packing kg lbs Bandwidth mm Inch Weight
Carbon Steel 7 25 pcs/Box 0.691 1.523 1.2 0.05
Material mm Inch 1.2 0.05 kg lbs
Material W2 12.7 1/2 0.391 0.862
SUS 304 15.8 5/8 0.466 1.027
PU : Packing Unit SUS 304
IC : Industrial Carton
Material W4

27 PRODUCT CATALOG PRODUCT CATALOG 28

ORBIT OBBS WITH THUMB ORBIT OBBS WITH THUMB PVC ORBIT ORIGINAL
(W1/W4) (W1/W4)

ORBIT Thumbscrew hose clamp is easy to use without any ORBIT Thumbscrew with PVC hose clamp is easy to use without any
installation tools. It is ideal for home usage or application that installation tools. Thumbscrew is covered with PVC rubber. It is ideal
need to frequently install and reinstall hose. It is available in for home usage or application that need to frequently install and
W1 zinc plated mild steel or W4 304 stainless steel clamp. reinstall hose. It is available in W1 zinc plated mild steel or W4 304
stainless steel clamp.
ORBIT ORIGINAL

C
C
bL Thumb L
b
Housing
Screw Screw

Housing

Clamping ØD Band Clamping ØD Thumb With PVC
Band

as s
a

Size and Adjustment Dimension (mm) Packing Size and Adjustment Dimension (mm) Packing

Size Old Size mm Inches a bC L s(W1) s(W4) PU IC Size Old Size mm Inches a b C L s(W1) s(W4) PU IC

12 OOO 9.5-12 3/8 - 1/2 9.5 12.3 24.2 36.5 0.93 0.8 100 2000 12 OOO 9.5-12 3/8 - 1/2 9.5 12.3 27 39 0.93 0.8 100 2000
16 MOO 11-16 7/16 - 5/8 9.5 12.3 24.2 36.5 0.93 0.8 100 2000 16 MOO 11-16 7/16 - 5/8 9.5 12.3 27 39 0.93 0.8 100 2000
20 OO 13-20 1/2 - 3/4 9.5 12.3 24.2 36.5 0.93 0.8 100 2000 20 OO 13-20 1/2 - 3/4 9.5 12.3 27 39 0.93 0.8 100 2000
21 OOX 16-21 1/2 - 13/16 12.2 14.65 24.2 40.5 0.93 0.8 100 1200 21 OOX 16-21 1/2 - 13/16 12.2 14.65 27 44 0.93 0.8 100 1200
22 16-22 5/8 - 7/8 12.2 14.65 24.2 40.5 0.93 0.8 100 1200 22 16-22 5/8 - 7/8 12.2 14.65 27 44 0.93 0.8 100 1200
25 O 18-25 12.2 14.65 24.2 40.5 0.93 0.8 100 1200 25 O 18-25 12.2 14.65 27 44 0.93 0.8 100 1200
30 OX 22-30 3/4 - 1 12.2 14.65 24.2 40.5 0.93 0.8 50 600 30 OX 22-30 3/4 - 1 12.2 14.65 27 44 0.93 0.8 50 600
35 1A 25-35 7/8 - 1 1/8 12.2 14.65 24.2 40.5 0.93 0.8 50 600 35 1A 25-35 7/8 - 1 1/8 12.2 14.65 27 44 0.93 0.8 50 600
40 1 30-40 1 - 1 3/8 12.2 14.65 24.2 40.5 0.93 0.8 50 600 40 1 30-40 1 - 1 3/8 12.2 14.65 27 44 0.93 0.8 50 600
50 1X 35-50 1 1/8 - 1 5/8 12.2 14.65 24.2 49.4 0.93 0.8 25 300 50 1X 35-50 1 1/8 - 1 5/8 12.2 14.65 27 51 0.93 0.8 25 300
55 2A 40-55 1 3/8 - 2 12.2 14.65 24.2 49.4 0.93 0.8 25 300 55 2A 40-55 1 3/8 - 2 12.2 14.65 27 51 0.93 0.8 25 300
60 2 45-60 1 5/8 - 2 1/8 12.2 14.65 24.2 49.4 0.93 0.8 25 300 60 2 45-60 1 5/8 - 2 1/8 12.2 14.65 27 51 0.93 0.8 25 300
2X 1 3/4 - 2 3/8 2X 1 3/4 - 2 3/8

Material W1 W4 Material W1 W4

PU : Packing Unit PU : Packing Unit
IC : Industrial Carton IC : Industrial Carton

29 PRODUCT CATALOG PRODUCT CATALOG 30

ORBIT ORIGINAL ORBIT MINI CLAMP ORBIT THROBBING CLAMP ORBIT ORIGINAL

ORBIT Mini W1 is made from quality zinc plated steel with cross-slot ORBIT Throbbing Clamp is made from 304 grade stainless steel. With
screw. It is suitable for low pressure applications. It is com- its flexibility, it is suitable to used in applications such as CV boot
monly used for fuel pipe and household applications. It is joint or light duty hose assembly or cable management.
available in W1 grade.

Screw Hex. L Screw Nut
a s Band

OD. Adjustment

t

Band Width

Size and Adjustment Dimension (mm) Packing Dimension (mm) Packing
PU IC
Size mm Inches a L s Hex PU IC Size Band Length Band Width
100 1,000
8 6-8 1/4 - 5/16 9 16 0.6 7 200 2,400 350 350 7 100 1,000
9 16 0.6 7 200 2,400 820 820 7
10 8-10 5/16 - 3/8 9 16 0.6 7 200 2,400
9 16 0.6 7 100 1,200
13 10-13 3/8 - 1/2 9 16 0.6 7 100 1,200
9 16 0.6 7 100 1,200
14 11-14 7/16 - 9/16 9 16 0.6 7 100 1,200 Material AISI 300 series stainless steel.
9 16 0.6 7 100 1,200
16 13-16 1/2- 5/8 PU : Packing Unit
IC : Industrial Carton

18 15-18 5/8 - 11/16

19 16-19 5/8 - 3/4

20 17-20 21/32 - 3/4

Material W1 W4

PU : Packing Unit
IC : Industrial Carton

31 PRODUCT CATALOG PRODUCT CATALOG 32

ORBIT ORIGINAL ORBIT MULTIBAND HOSE CLAMP ORBIT ADJUSTABLE EAR CLAMP

One set of ORBIT MultiBand comes with one roll of raised edge Adjustable Ear Clamp can be adjusted to fit various diameter of
band and one set of housings. It can be cut to length to fit with hose. It is made from 304 stainless steel, and it has very good
any sizes of hose above 2”. It is suitable for low pressure and corrosion resistance in fresh water and industrial atmo-
large diameter applications such as industrial ducting for spheres. It is deal for maintenance and garage to clamp different
ventilation / heating. size of hose.

b h Housing Clamping ØD
Hex. Screw
L Support Housing Band Thickness
a Band

s

ORBIT INDUSTRIAL Band Width ORBIT INDUSTRIAL

Size and Adjustment Dimension (mm) Packing Size and Adjustment Band width Band Thickness Packing
PU IC
Band Length (M) Housing (pcs.) ab hs L mm mm PU IC
1 20
10 10 12.2 14.65 11 0.8 33 45 25-45 7 0.6 100 1000
50 25-50 7 0.6 100 1000
Material W3 110 40-110 7 0.6 100 500
120 60-120 7 0.6 100 500
PU : Packing Unit
IC : Industrial Carton Material W4

33 PRODUCT CATALOG PRODUCT CATALOG 34

ORBIT TWO EAR CLAMP Size and Adjustment (mm) Dimension (mm) Packing

ORBIT Two Ear Clamps is made from zinc plated steel. It is Min Max ØD b a L s PU IC
suitable for general hose and industrial application. It can
be clamped with plier and offer balance clamping force with 57 7.3 4.3 6.0 11.0 0.6 50 3,000
both clamping ear. 79 9.3 4.8 6.0 13.5 0.8 50 3,000
9 11 11.3 5.3 6.5 17.0 0.8 50 2,000
ORBIT INDUSTRIAL 10 12 12.3 5.5 6.5 18.0 0.9 50 2,000 ORBIT INDUSTRIAL
11 13 13.3 5.8 6.5 19.0 1.0 50 2,000
13 15 15.3 6.3 7.0 21.5 1.1 50 1,500
14 17 17.5 6.6 7.0 24.0 1.1 50 1,500
15 18 18.5 7.0 7.5 25.0 1.1 50 1,500
17 20 20.5 7.6 7.5 27.0 1.1 50 1,500
18 21 21.5 7.9 8.0 28.0 1.1 50 1,000
20 23 23.5 8.5 8.0 31.0 1.1 50 1,000
22 25 25.5 9.1 8.5 33.0 1.3 50 800
23 27 27.5 9.4 8.5 35.0 1.3 50 800
25 28 28.5 10.0 9.0 36.0 1.3 50 800
28 31 31.5 10.6 9.0 39.0 1.3 50 500
31 34 34.5 11.0 9.5 42.0 1.3 50 500
34 37 37.5 11.5 9.5 46.0 1.5 50 400
37 40 40.5 12.0 10.0 49.0 1.5 50 400
40 43 43.5 12.5 10.0 53.0 1.5 50 300
43 46 36.5 13.0 10.5 56.0 1.5 50 300

Material Finish: Zinc-Plated

Material W1

PU : Packing Unit
IC : Industrial Carton
C1 : Diamension Finish Zinc - Plated
C2 : Diamension Steel

35 PRODUCT CATALOG PRODUCT CATALOG 36

ORBIT STEPLESS EAR CLAMP Size Dimension Packing Size Dimension Packing Size Dimension Packing
(mm) PU IC (mm) PU IC (mm) PU IC
ORBIT Stepless Ear Clamp offers smooth inner surface without any
ORBIT ORIGINAL gap when tighten. It is made from 304 stainless steel, and it has very 11.9 9.4 - 11.9 100 2,000 33.1 29.9 - 33.1 100 1,000 75.5 72.3 - 75.5 100 500 ORBIT ORIGINAL
good corrosion resistance in fresh water and industrial atmospheres. 12.3 9.8 - 12.3 100 2,000 34.6 31.4 - 34.6 100 1,000 77.0 73.8 - 77.0 100 500
It offers fast and tamper-proof installation and is suitable for various 12.8 10.3 - 12.8 100 2,000 36.1 32.9 - 36.1 100 1,000 78.5 75.3 - 78.5 100 500
application. Easy installation with ORBIT ear clamp plier. 13.3 10.8 - 13.3 100 2,000 37.6 34.4 - 37.6 100 1,000 80.0 76.8 - 80.0 100 500
13.8 11.3 - 13.8 100 2,000 38.1 34.9 - 38.1 100 1,000 81.5 78.3 - 81.5 100 500
Clamping ØD 14.0 11.5 - 14.0 100 2,000 39.6 36.4 - 39.6 100 1,000 83.0 79.8 - 83.0 100 500
14.5 12.0 - 14.5 100 2,000 41.0 37.8 - 41.0 100 1,000 84.5 81.3 - 84.5 100 500
Band Width 14.8 12.3 - 14.8 100 2,000 42.5 39.3 - 42.5 100 1,000 86.0 82.8 - 86.0 100 500
Band Thickness 15.3 12.8 - 15.3 100 2,000 44.0 40.8 - 44.0 100 1,000 87.5 84.3 - 87.5 100 500
15.7 13.2 - 15.7 100 2,000 45.5 42.3 - 45.5 100 1,000 89.0 85.8 -89.0 100 500
16.2 13.7 - 16.2 100 2,000 47.0 43.8 - 47.0 100 1,000 90.5 87.3 - 90.5 100 500
16.6 14.1 - 16.6 100 2,000 48.5 45.3 - 48.5 100 1,000 92.0 88.8 - 92.0 100 500
16.8 14.3 - 16.8 100 2,000 50.0 46.8 - 50.0 100 1,000 93.5 90.3 - 93.5 100 500
17.0 14.5 - 17.0 100 2,000 51.5 48.3 - 51.5 100 1,000 95.0 91.8 - 95.0 100 500
17.5 15.0 - 17.5 100 2,000 53.0 49.8 - 53.0 100 1,000 96.5 89.9 - 96.5 100 500
17.8 14.6 - 17.8 100 2,000 54.5 51.3 - 54.5 100 500 98.0 94.8 - 98.0 100 500
18.0 14.8 - 18.0 100 2,000 55.5 52.5 - 55.5 100 500 98.5 95.3 - 98.5 100 500
18.5 15.3 - 18.5 100 2,000 56.0 52.8 - 56.0 100 500 99.5 96.3 - 99.5 100 500
19.2 16.0 -19.2 100 2,000 57.5 54.3 -57.5 100 500
ORBIT INDUSTRIAL 19.8 16.6 - 19.8 100 2,000 59.0 56.8 - 59.0 100 500 ORBIT INDUSTRIAL
21.0 17.8 - 21.0 100 2,000 60.5 57.3 - 60.5 100 500
22.6 19.4 - 22.6 100 2,000 62.0 58.8 - 62.0 100 500
23.5 20.3 - 23.5 100 1,000 63.5 60.3 - 63.5 100 500
24.1 20.9 - 24.1 100 1,000 65.0 61.8 - 65.0 100 500
25.6 22. 4 - 25.6 100 1,000 66.5 63.3 - 66.5 100 500
27.1 23.9 - 27.1 100 1,000 68.0 64.8 - 68.0 100 500
28.6 25.4 - 28.6 100 1,000 69.5 66.3 - 69.5 100 500
30.1 26.9 - 30.1 100 1,000 71.0 67.8 - 71.0 100 500
30.8 27.6 - 30.8 100 1,000 72.5 69.3 - 72.5 100 500
31.6 26.4 - 31.6 100 1,000 74.0 70.8 - 74.0 100 500

*Other sizes are available upon request
Material Grade : 304 Stainles Steel
706R series
Band width 7mm
Band Thickness 6 mm

Material W4

PU : Packing Unit
IC : Industrial Carton

37 PRODUCT CATALOG PRODUCT CATALOG 38

ORBIT SPRING CLAMP Size and Adjustment Dimension (mm) Packing

ORBIT Spring Clamp is suitable for application which has tempera- Size (D1) Hose (D2) Max (D3) tb PU IC
ture fluctuation when hose expand under high temperature and
ORBIT INDUSTRIAL contract upon cooling. It’s made from spring grade high carbon steel 6.0 6.6 7.5 0.5 6.0 100 2,000 ORBIT INDUSTRIAL
with automotive grade surface treatment. 7.0 7.6 8.3 0.6 6.0 100 2,000
8.0 8.6 9.5 0.8 8.0 100 2,000
b 9.0 9.7 10.7 0.8 8.0 100 2,000
9.5 10.3 11.3 0.8 8.0 100 2,000
10.0 10.8 11.9 0.8 8.0 100 2,000
10.5 11.4 12.5 0.8 8.0 100 2,000
11.0 11.9 13.1 0.8 8.0 100 2,000
11.5 12.4 13.7 0.8 8.0 100 2,000
12.0 13.0 14.3 0.8 8.0 100 2,000
12.5 13.5 14.9 0.8 8.0 100 2,000
13.0 14.0 15.5 1.0 10.0 100 2,000
13.5 14.6 16.1 1.0 10.0 100 2,000
14.0 15.1 16.7 1.0 10.0 100 2,000
14.5 15.7 17.3 1.0 10.0 100 2,000
15.0 16.2 17.9 1.0 10.0 100 2,000
16.0 17.3 19.1 1.0 12.0 100 2,000
17.0 18.4 20.2 1.0 12.0 100 2,000
18.0 19.4 21.4 1.0 12.0 100 2,000
19.0 20.5 22.6 1.0 12.0 100 2,000
20.0 21.6 23.8 1.2 12.0 100 2,000
21.0 22.7 25.0 1.2 12.0 100 2,000
23.0 24.8 27.4 1.2 12.0 100 2,000
24.0 25.9 28.5 1.2 12.0 100 2,000
25.0 27.0 29.8 1.2 12.0 100 2,000

*Other sizes are available upon requet

Material W1

PU : Packing Unit
IC : Industrial Carton
D1 : Delivery Diameter
D2 : Hose Diameter
D3 : Max Open
t(mm) : Thickness (mm)
b(mm) : Band width(mm)

39 PRODUCT CATALOG PRODUCT CATALOG 40

ORBIT WIRE CLIPS Size and Adjustment Wire Diameter Screw Packing
(ZINC PLATED)
Size mm Inches ØD mm. Spec. Hex. PU IC
ORBIT Wire Clips is made from quality zinc plated carbon steel wire (mm.)
ORBIT ORIGINAL with a hex screw. They are perfect for soft to semi-rigid hoses ,with 1.4 100 2,000 ORBIT ORIGINAL
spiral reinforcement. It is suitable for any application where low to 10 8-10 5/16 - 3/8 1.4 M5x30 8 100 2,000
medium tightening torque is required. 1.6 M5x30 8 100 2,000
12 10-12 3/8 - 1/2 1.6 M5x30 8 100 2,000
1.6 M5x30 8 100 2,000
14 12-14 1/2 - 9/16 1.6 M5x30 8 100 1,200
1.8 M5x30 8 100 1,200
16 14-16 9/16 - 5/8 1.8 M5x30 8 100 1,200
1.8 M5x30 8 100 1,200
18 16-18 5/8 - 3/4 2.0 M5x35 8 50 1,000
2.0 M6x40 10 50 1,000
20 18-20 3/4 - 6/8 2.0 M6x40 10 50 600
2.0 M6x45 10 50 600
22 20-22 6/8 - 7/8 2.0 M6x50 10 50 600
2.3 M6x50 10 50 600
25 22-25 7/8 - 1 2.3 M6x50 10 50 600
2.3 M6x50 10 50 600
30 25-30 1 - 1 3/16 2.3 M6x50 10 50 600
2.3 M6x50 10 25 300
35 30-35 1 3/16 - 1 3/8 2.3 M6x50 10 25 300
2.3 M6x50 10 25 300
Screw Hex. 40 35-40 1 3/8 - 1 5/8 2.3 M6x50 10 25 300
2.3 M6x50 10 25 300
45 40-45 1 5/8 - 1 3/4 2.3 M6x60 10 25 300
2.3 M6x60 10 25 300
Ø Diameter 50 45-50 1 3/4 - 2 2.3 M6x60 10 25 300
Wire Diameter M6x60 10
Screw 55 50-55 2 - 2 1/8

60 55-60 2 1/8 - 2 3/8

65 60-65 2 3/8 - 2 9/16

70 65-70 2 9/16 - 2 3/4

75 70-75 2 3/4 - 3

ORBIT INDUSTRIAL 80 75-80 3 - 3 1/8 ORBIT INDUSTRIAL

85 80-85 3 1/8 - 3 1/4

90 85-90 3 1/4 - 3 1/2

95 90-95 3 1/2 - 3 3/4

100 95-100 3 3/4 - 4

110 100-110 4 - 4 3/8

120 110-120 4 3/8 - 4 3/4

130 120-130 4 3/4 - 5 1/8

Finish
3w : Zinc-Plated (White)
6y : Zinc-Plated (yellow)

Material W1
PU : Packing Unit
IC : Industrial Carton

41 PRODUCT CATALOG PRODUCT CATALOG 42

ORBIT P-CLIPS Product Ranges Diameter Nominal Dimension
Size Diameter (nD) (a) 12.7
ORBIT P-Clip is one-piece clips made from Galvanised Steel, Min. Diameter Max. Diameter t ød1 ød2 e (a)15 Rubber
304 or 316 Stainless Steel material with EPDM rubber liner. 5 mm. t ød1
The EPDM rubber liner reduces vibration and wear from clamp 6 1 M6 8.6 22 EPDM
edges and also provides a tighter fit. P-Clip is used to lock 8 (mm) (mm) e 1 M6 8.6 22 0.7 M8 ød2 EPDM
cables, hoses, tubes and pipe in place with one screw or bolt. 9 1 M6 8.6 22 0.7 M8 EPDM
10 4.5 6 5 17 1 M6 8.6 22 0.7 M8 11 EPDM
12 1 M6 8.6 22 0.7 M8 11 EPDM
13 5.5 8 6 17 1 M6 8.6 22 0.7 M8 11 EPDM
14 1 M6 8.6 22 0.7 M8 11 EPDM
15 7.5 10 8 17 1 M6 8.6 22 0.7 M8 11 EPDM
16 1 M6 8.6 22 0.7 M8 11 EPDM
17 8.5 11 9 17 1 M6 8.6 22 0.7 M8 11 EPDM
18 1 M6 8.6 22 0.7 M8 11 EPDM
19 9.5 12 10 17 1 M6 8.6 22 0.7 M8 11 EPDM
20 1 M6 8.6 22 0.7 M8 11 EPDM
21 11.5 14 12 17 1 M6 8.6 22 0.7 M8 11 EPDM
22 1 M6 8.6 22 0.7 M8 11 EPDM
24 12.5 15 13 17 1 M6 8.6 22 0.7 M8 11 EPDM
25 1 M6 8.6 22 0.7 M8 11 EPDM
26 13.5 16 14 17 1 M6 8.6 22 0.7 M8 11 EPDM
27 1 M6 8.6 22 0.7 M8 11 EPDM
28 14.5 17 15 17 1 M6 8.6 22 0.7 M8 11 EPDM
29 1 M6 8.6 22 0.7 M8 11 EPDM
ØD.Nominal Size Ød.2 30 15.5 18 16 17 1 M6 8.6 22 0.7 M8 11 EPDM
(Close Diameter) 32 1 M6 8.6 22 0.7 M8 11 EPDM
34 1 M6 8.6 22 0.7 M8 11 EPDM
Ød.1 35 16.5 19 17 17 1 M6 8.6 22 0.7 M8 11 EPDM
36 1 M6 8.6 22 0.7 M8 11 EPDM
38 18 20 18 17 1 M6 8.6 22 0.7 M8 11 EPDM
40 1 M6 8.6 22 0.7 M8 11 EPDM
42 18.5 21 19 17 0.7 M8 11 EPDM
44 M6 8.6 22 0.7 M8 11 EPDM
ORBIT INDUSTRIAL 46 19.5 22 20 17 1 M6 8.6 22 0.7 M8 11 EPDM
48 1 M6 8.6 22 0.7 M8 11 EPDM
e 50 20.5 23 21 17 1 M6 8.6 22 0.7 M8 11 EPDM
a 52 1 M6 8.6 22 0.7 M8 11 EPDM
t 56 21.5 24 22 17 1 M6 8.6 22 0.7 M8 11 EPDM
60 1 M6 8.6 22 0.7 M8 11 EPDM
View form : A - A 23.5 26 24 17 1 M6 8.6 22 0.7 M8 11 EPDM
1 M6 8.6 22 0.7 M8 11
AA 24.5 27 25 17 11
11
25.5 28 26 17

Material W1 W4 W5 26.5 29 27 17 ORBIT INDUSTRIAL
*W5 made to order
27.5 30 28 17

28.5 31 29 17

29.5 32 30 17

31.5 34 32 17

33.5 36 34 17

34.5 37 35 17

35.5 38 36 17

37.5 40 38 17

39.5 42 40 17

41.5 44 42 17

43.5 46 44 17

45.5 48 46 17

47.5 50 48 17

49.5 52 50 17

51.5 54 52 17

55.5 58 56 17

59.5 62 60 17

43 PRODUCT CATALOG PRODUCT CATALOG 44

ORBIT SWP GRIP Pipe outside Clamping Working pressure Product Width Distance Setting gap
diameter range O.D. B* between between pipe ends
SWP Grip is a designed to replace the need for flanging and welding sealing slips
by providing a quick and easy solution to joining plain-end pipe.
Two anchor rings which are placed adjacent to separate from, the Torque rate
sealing mechanism. Suitable for pipes O.D. 26.9-273 mm
Pipe ND O.D. Min-Max Shipbuiding General use ΦD C without with strip
strip insert insert (Max)

mm mm bar bar mm mm mm mm mm Nm

20A 3/4" 21.3 20-22 18 46 39 61 26 5-8 10 8
20A 3/4" 26.9 26-28 18 8
25A 1" 30 29-31 18 46 43 61 26 5-8 10 8
25A 1" 33.7 32-35 18 8
32A 1 1/4" 38 37-39 18 46 46 61 26 5-8 10 10
32A 1 1/4" 42.4 41-43 18 10
40A 1 1/2" 44.5 44-45 18 40 50 61 26 5-8 10 10
40A 1 1/2" 48.3 47-49 18 10
50A 2" 54 53-55 18 35 57 61 26 5-8 10 10
50A 2" 57 56-58 18 10
50A 2" 60.3 59-61 18 32 61.3 61 26 5-8 10 10
65A 2 1/2" 66.6 64-68 18 20
65A 2 1/2" 70 68-71 18 32 63.4 61 26 5-8 10 20
65A 2 1/2" 73 72-74 18 20
65A 2 1/2" 76.1 75-77 18 32 67.2 61 26 5-8 10 20
65A 2 1/2" 79.5 78-81 18 20
80A 3" 84 83-85 18 32 73 76 37 5-10 15 20
80A 3" 88.9 88-90 18 20
80A 3" 100.6 99-102 16 32 76 76 37 5-10 15 25
90A 3 1/2" 101.6 100-103 16 25
ORBIT INFRASTRUCTURE 100A 4" 104 103-105 16 32 79.2 76 37 5-10 15 25 ORBIT INFRASTRUCTURE
100A 4" 108 106-109 16 25
100A 4" 114.3 113-116 16 32 88.7 95 37 5-10 25 25
100A 4" 127 126-128 16 40
125A 5" 129 128-130 16 32 92 95 41 5-10 25 40
125A 5" 130.2 129-132 16 40
125A 5" 133 131-135 16 32 95 95 41 5-10 25 40
125A 5" 139.7 138-142 16 40
125A 5" 141.3 140-143 16 32 98.2 95 41 5-10 25 40
150A 6" 154 153-156 16 40
C 150A 6" 159 158-161 16 32 101.6 95 41 5-10 25 40
B 150A 6" 168.3 167-170 16 40
150A 6" 193.7 192-196 10 32 106 95 41 5-10 25 60
HOW TO SWP GRIP INSTALLATION 150A 6" 200 198-202 10 60
ΦD 150A 6" 204 202-206 10 32 111 95 41 5-10 25 60
200A 8" 206 204-208 10 60
200A 8" 219.1 216-222 10 32 123 95 41 5-10 25 60
225A 9" 244.5 242-247 10 60
225A 9" 250 247-253 10 32 123.7 95 41 5-10 25 60
225A 9" 254 251-257 10 60
250A 10" 256 253-259 10 32 126 95 41 5-10 25 60
250A 10" 267 264-270 10 60
250A 10" 273 270-276 10 32 130 95 41 5-10 25 60
300A 12" 323.9 320-327 10 80
300A 12" 377 375-379 8.5 30 136.4 95 41 5-10 25 80
400A 16" 426 424-428 7.5 80
ORBIT INDUSTRIAL 25 151 110 54 5-10 35 ORBIT INDUSTRIAL

25 153 110 54 5-15 35

25 154.3 110 54 5-15 35

25 157 110 54 5-15 35

Deburr and remove sharp Mark half-width of pipe coupling Fitting the pipe coupling 25 163.8 110 54 5-15 35
edges from pipe ends. on both pipe ends as fitting guide over the pipe end
25 165.4 110 54 5-15 35
Clean the pipe surface from impurities
(bad coating) No loose matter under 25 176.4 110 54 5-15 35
sealing lips.
25 183 110 54 5-15 35

22 189 110 54 5-15 35

22 215 142 80 15-20 40

22 222 142 80 15-20 40

22 224 142 80 15-20 40

22 234 142 80 15-20 40

22 250 142 80 15-20 40

Fitting the pipe coupling Tightening the two bolts Finished 20 275 142 80 15-20 40
within tolerance alternately
20 279 142 80 15-20 40
with specified torque wrench
20 282 142 80 15-20 40

Material W4 W5 20 284 142 80 15-20 40

20 297 142 80 15-20 40

NOTES: 20 303 142 80 15-20 40
The above tables are guides to the most common sizes. Couplings to suit specific outside diameters not listed may be
manufactured to order. Please contact us for further details. 20 355.9 142 75 10-25 40

* Width B: 250mm and 500mm width version is available. 16 409 142 75 10-25 40

For Further product information, please refer to ORBIT SWP CATALOG. 16 458 142 75 10-25 40

45 PRODUCT CATALOG PRODUCT CATALOG 46

ORBIT SWP OPEN FLEX 1R Pipe outside Clamping Working pressure Product Width Distance Setting gap
diameter range O.D. B* between between pipe ends
OPEN Flex 1R is ideal for all situations where you need to make sealing slips
a permanent repair under pressure.
Torque rate
• Permanent repair under pressure.
• Repaired in minutes faster than pipe joints Pipe ND O.D. Min-Max Shipbuiding General use ΦD C without with strip
• Avoided the need for costly downtime strip insert insert (Max)
• One Lock pipe clamp
• OPEN FLEX 1R Suitable for pipes O.D. 26.9-168.3 mm mm mm bar bar mm mm mm mm mm Nm

20A 3/4" 26.9 26-28 25 40 38 57 30 5-8 10 8
25A 1" 30 29-31 25 8
25A 1" 33.7 32-35 25 40 42 57 30 5-8 10 8
32A 1 1/4" 38 37-39 25 10
32A 1 1/4" 42.4 41-43 25 40 45 57 30 5-8 10 10
40A 1 1/2" 44.5 44-45 25 10
40A 1 1/2" 48.3 47-50 25 40 50.3 61 26 5-8 10 10
50A 2" 54 52-56 20 10
50A 2" 57 55-59 20 40 54.7 61 26 5-8 10 10
50A 2" 60.3 59-62 20 10
65A 2 1/2" 66.6 64-68 20 40 56.8 61 26 5-8 10 20
65A 2 1/2" 70 68-71 20 20
65A 2 1/2" 73 71-75 20 40 64.2 61 26 5-8 10 20
65A 2 1/2" 76.1 74-78 20 20
ORBIT INFRASTRUCTURE 65A 2 1/2" 79.5 78-80 20 35 70 76 37 5-10 15 20 ORBIT INFRASTRUCTURE
80A 3" 84 82-86 20 20
80A 3" 88.9 87-91 20 35 73 76 37 5-10 15 20
80A 3" 100.6 99-103 18 20
90A 3 1/2" 101.6 100-104 18 35 76.2 76 37 5-10 15 20
90A 3 1/2" 104 102-106 18 20
100A 4" 104.8 103-107 18 40 85.5 95 37 5-10 25 20
100A 4" 108 106-110 18 20
100A 4" 114.3 112-116 18 40 89 95 41 5-10 25 20
100A 4" 127 125-129 18 25
125A 5" 129 127-131 18 40 92 95 41 5-10 25 25
125A 5" 130.2 128-132 18 25
125A 5" 133 131-135 18 40 95.2 95 41 5-10 25 25
125A 5" 139.7 138-142 18 25
ΦD 125A 5" 141.3 139-143 18 40 98.5 95 41 5-10 25 25
C 150A 6" 154 152-156 18 25
150A 6" 159 157-161 18 40 103 95 41 5-10 25 25
B 150A 6" 168.3 168.3 18 25
40 108 95 41 5-10 25
HOW TO SWP OPEN FLEX 1R INSTALLATION
35 120 95 41 5-10 25

ORBIT INDUSTRIAL 35 120.7 95 41 5-10 25 ORBIT INDUSTRIAL

35 123 95 41 5-10 25

35 124 95 41 5-10 25

35 127 95 41 5-10 25

35 133.4 95 54 5-10 35

40 148 110 54 5-10 35

40 150 110 54 5-10 35

1 40 151.3 110 54 5-10 35

Take the sealing rubber off from casing 23 40 154 110 54 5-10 35
and cover where the leak occurs with
the sealing rubber. Cover the sealing rubber with the casing. Install SWP following the recommended 40 160.8 110 54 5-10 35
torque by using the appropriate tool
listed by the provider. 35 162.4 110 54 5-10 35

35 173.4 110 54 5-10 35

35 180 110 54 5-10 35

Material W4 W5 35 186 110 54 5-10 35

For Further product information, please refer to ORBIT SWP CATALOG. NOTES:
The above tables are guides to the most common sizes. Couplings to suit specific outside diameters not listed may be
manufactured to order. Please contact us for further details.

* Width B: 250mm and 500mm width version is available.

47 PRODUCT CATALOG PRODUCT CATALOG 48

ORBIT SWP OPEN FLEX 2R Pipe outside Clamping Working pressure Product Width Distance Setting gap
O.D. B* between between pipe ends
OPEN Flex 2R is ideal for all situations where you need to make a diameter range sealing slips
permanent repair under pressure.
Torque rate
• Permanent repair under pressure.
• Repaired in minutes faster than pipe joints Pipe ND O.D. Min-Max Shipbuiding General use ΦD C without with strip
• Avoided the need for costly downtime strip insert insert (Max)
• Double Lock pipe clamp
• OPEN FLEX 2R Suitable for pipes O.D. 180-2032 mm. mm mm bar bar mm mm mm mm mm mm Nm

C 170A 7" 180 178-182 16 30 204 142 250 75 10-25 40 60
B ΦD 190A 7.5" 200 198-202 16 60
200A 7.9" 206 204—208 16 30 224 142 250 75 10-25 40 60
Material W4 W5 200A 7.9" 219.1 216-222 16 60
NOTES: 225A 8.9" 244.5 242—246 16 30 238 142 250 75 10-25 40 60
The above tables are guides to the most common sizes. Couplings to suit specific outside diameters not listed may be 225A 8.9" 250 247-253 16 80
manufactured to order. Please contact us for further details. 250A 9.8" 256 253—258 16 30 251.1 142 250 75 10-25 40 80
* Width B: 250mm and 500mm width version is available. 250A 9.8" 267 264-270 16 80
For Further product information, please refer to ORBIT SWP CATALOG. 250A 9.8" 273 270-276 16 25 276 142 250 75 10-25 40 80
300A 11.8" 304 301-307 10 80
300A 11.8" 323.9 320-327 10 25 282 142 250 75 10-25 40 80
350A 13.8" 355.6 352-359 8.5 80
350A 13.8" 377 375-379 8.5 25 288 142 250 75 10-25 40 80
400A 15.7" 406.4 402-411 7.5 80
ORBIT INFRASTRUCTURE 400A 15.7" 426 423—413 7 25 299 142 250 75 10-25 40 80 ORBIT INFRASTRUCTURE
450A 17.7" 457.2 452-462 6.5 80
500A 19.6" 508 503-513 6 25 305 142 250 75 10-25 40 120
550A 21.7" 558.8 554-564 5.5 160
600A 23.6" 609.6 605-615 5 20 336 142 250 75 10-25 40 160
700A 27.6" 711.2 708-715 4 160
750A 29.5" 762 758-766 4 20 355.9 142 250 75 10-25 40 160
800A 31.5" 812.8 809-817 4 160
900A 35.4" 914.4 910-918 4 16 387.6 142 250 75 10-25 40 160
1000A 39.4" 1016 1012-1020 4 200
1100A 43.3" 1117.6 1113-1122 3.5 16 409 142 250 75 10-25 40 200
1200A 47.2" 1219.2 1215-1224 3.5 200
1300A 51.2" 1320.8 1316-1325 3 16 438 142 250 75 10-25 40 240
1400A 55.1" 1422.4 1418-1427 3 240
1500A 59.1" 1524 1519-1529 2.5 14 458 142 250 75 10-25 40 240
1600A 63" 1625.6 1621-1631 2.5 240
1700A 66.9" 1727.2 1722-1732 2.5 12 489 142 250 75 10-25 40 240
1800A 70.9" 1828.8 1824-1834 2 240
1900A 74.8" 1930.4 1925-1935 2 10 540 142 250 75 10-25 40 240
2000A 78.7" 2032 2027-2037 2 240
10 590.8 142 250 75 10-25 40

ORBIT INDUSTRIAL 10 641.6 142 250 75 10-25 40 ORBIT INDUSTRIAL

5 743.2 142 250 75 10-25 40

5 794 142 250 75 10-25 40

5 844.8 142 250 75 10-25 40

5 946.4 142 250 75 10-25 40

5 1048 142 250 75 10-25 40

5 1149.6 142 250 75 10-25 40

5 1251.2 142 250 75 10-25 40

5 1352.8 142 250 75 10-25 40

5 1454.4 142 250 75 10-25 40

5 1556 142 250 75 10-25 40

5 1657.6 142 250 75 10-25 40

5 1759.2 142 250 75 10-25 40

5 1860.8 142 250 75 10-25 40

5 1962.4 142 250 75 10-25 40

5 2064 142 250 75 10-25 40

49 PRODUCT CATALOG PRODUCT CATALOG 50

ORBIT DWV ORBIT PIPE REPAIR CLAMP

ORBIT DWV is single bolt design coupling for Drain, Waste and Pipe Repair Clamp Quick Repair Leakage For Oil And Plastic Pipe
Vent used in Residential and Commercial Sanitary system. The • Stainless Steel Shield
new design allows coupling to be visually inspected for correct instal- • Plated Malleable Iron Lugs With Rubber Gaskets
lation. it is suitable for application with no pressure DWV series • Plated Long Neck Carriage Bolt And Nut
couplings are built with high corrosion resistance stainless steel • 1/2" And 3/4" Are Availables
material.

ORBIT INFRASTRUCTURE Model DN SIZE inch Material Rubber Type Pipe size Wide Height psc./bag Unit/Box ORBIT INFRASTRUCTURE

ORBIT DWV DN40 1 1/2" DN40 mm 1 1/2 304 NBR 1/2" 76 28 10 50
ORBIT DWV DN40 2" DN50 2 3/4" 76 33 10 50
ORBIT DWV DN40 3" DN75 40 3 P P
ORBIT DWV DN40 42" DN100 50 4 P P PU : Packing Unit
ORBIT DWV DN40 5" DN125 75 5 P P IC : Industrial Carton
ORBIT DWV DN40 6" DN150 100 6 P P
ORBIT DWV DN40 8" DN200 125 8 P P
150 P P
200 P P

Material 304
Rubber Type NBR

51 PRODUCT CATALOG PRODUCT CATALOG 52

ORBIT PIPE HANGER Nominal Outside Nut Bolt Dimension (mm) Packing
Pipe Size Diameter Flange Size
Material DN NPS D H C t1 t2 W PU IC
BAND : SPCC mm Inch. Inch.
HEXAGON BOLT : Carbon Steel 25 25 200
NUT : Carbon Steel 15 1/2 21.3 3/8 1/4 x 1 28 68 25 1.4 1.4 25 25 200
NUT FLANGE : SWRCH10A 20 3/4 26.7 71 25 1.4 1.4 25 25 200
SWIVEL ADJUSTER : SPCC 25 1 33.4 3/8 1/4 x 1 28 74 25 1.4 1.4 25 25 200
32 1 1/4 42.2 78 25 1.4 1.4 25 25 200
40 1 1/2 48.3 3/8 1/4 x 1 28 81 25 1.4 1.4 25 10 200
50 2 60.3 87 25 1.4 1.4 25 10 200
65 2 1/2 73.0 3/8 1/4 x 1 28 95 25 1.4 1.4 25 10 200
80 3 88.9 102 25 1.4 1.4 25 - 150
100 4 114.3 3/8 1/4 x 1 28 114 25 1.4 1.4 32 - 50
125 5 141.3 140 32 2.0 2.0 32 - 50
150 6 168.3 3/8 5/16 x 1 28 153 32 2.0 2.0 38 - 25
200 8 219.1 180 38 2.0 2.0
3/8 5/16 x 1 28

3/8 5/16 x 1 28

ORBIT INFRASTRUCTURE 3/8 5/16 x 1 28 ORBIT INFRASTRUCTURE

H 1/2 1/2 x 1 3/4 36
D
1/2 1/2 x 1 3/4 36

Nut Flange Size 5/8 1/2 x 1 3/4 36
(C) Swivel Adjuster Width
(t2) Swivel Adjuster
Thickness

Nut Flange Material a

Swivel Adjuster Nut BAND SPCC
Hexagon Bolt HEXAGON BOLT Carbon Steel
Bolt Size
NUT SWRCH10A
Nominal Pipe size Band NUT FLANGE SPCC
SWIVEL ADJUSTER

Revet PU : Packing Unit
IC : Industrial Carton

(W) Band Width (t1) Band Thinkness

53 PRODUCT CATALOG PRODUCT CATALOG 54

ORBIT SWIVEL RING HANGER ORBIT CLEVIS HANGER

Material:Carbon Steel Material : carbon steel
Size Range: 1/2'' through 8" Finish : paint, electro - galvanized, hot dip - gavanized
Finish:Zinc Colored Epoxy Plated
Comply with Federal Specitication ww-H-171E and American E
Manufactures Standardization Society MSS SP-69 & SP58
STEEL SIZE (UPPER)
RS

Nominal Pipe size
ORBIT INFRASTRUCTURE ORBIT INFRASTRUCTURE
A
B
F
B
C
A STEEL SIZE (LOWER)

Nominal Pipe Size Steel Size Steel Size A B C F E
(Upper) (Lower)
(mm) (mm) (mm) (inch) (inch)
(inch) (mm) (mm) (mm)
35 66 87 3/8" 3/8"
Model Rod Size (RS) psc./bag Unit/Box 1" 25 2.5x25 2x25 44 80 105 3/8" 3/8"
1 1/4" 32 3x25 2.5x25 50 80 105 3/8" 3/8"
1/2'' DN mm 20 100 1 1/2" 40 3x25 2.5x25 64 95 127 3/8" 3/8"
3/4'' 20 100 50 3x25 2.5x25 85 117 160 3/8" 1/2"
1'' 3/8 M10 20 100 2" 65 3x32 2.5x32 94 125 172 3/8" 1/2"
1 1/4'' 3/8 M10 20 100 2 1/2" 80 3x32 2.5x32 124 155 217 3/8" 1/2"
1 1/2'' 3/8 M10 20 100 100 4x32 3x32 150 180 259 1/2" 5/8"
2'' 3/8 M10 10 100 3" 125 5x32 4x32 175 210 280 1/2" 5/8"
2 1/2'' 3/8 M10 10 100 4" 150 5x32 4x32 222 253 365 1/2" 5/8"
3/8 M10 5 50 5" 200 6x38 5x38 274 306 443 3/4" 7/8"
3' 3/8 M10 5 50 6" 250 9x50 5x50 324 363 527 3/4" 7/8"
4" 3/8 M10 5 20 8" 300 9x50 6x50 364 408 590 7/8" 1"
5" 3/8 M10 5 20 10" 350 9x50 6x50 420 481 697 1" 1"
6" 1/2 M8 5 10 12" 400 12x65 6x65 466 514 753 1" 1"
8" 1/2 M8 14" 450 12x65 6x65 520 576 885 1" 1"
1/2 M8 16" 500 12x65 9x65 570 604 948 1" 1"
PU : Packing Unit 18" 550 15x65 9x65 630 686 1010 1 1/4" 1 1/4"
IC : Industrial Carton 20" 600 12x75 9x75 670 736 1085 1 1/4" 1 1/4"
22" 650 12x75 9x75
24"
26"

55 PRODUCT CATALOG PRODUCT CATALOG 56

ORBIT U BOLT ORBIT BAND HANGER

Material : Carbon Steel Material : Carbon Steel
Finish : Paint, Electro - Galvanized, Hot Dip - Gavanized Finish : Paint, Electro - Galvanized, Hot Dip - Gavanized

B d
AE STEEL SIZE.

ORBIT INFRASTRUCTURE ORBIT INFRASTRUCTURE

D
C

B
A
D

Nominal Pipe Size E A B C D Nominal Pipe Size Steel Size A B D d

(inch) (mm) (inch) (mm) (mm) (mm) (mm) (inch) (mm) (inch) (mm) (mm) (mm) (mm)

1/2" 15 1/4" 22 30 28 17 1/2" 15 2x25 35 50 25 8
3/4" 20 1/4" 28 36 35 21 3/4" 20 2x25 38 54 28 8
1" 25 5/16" 35 43 42 25 1" 25 2x25 52 72 35 8
1 1/4" 32 5/16" 44 52 50 30 1 1/4" 32 2x25 60 85 44 8
1 1/2" 40 5/16" 50 58 53 30 1 1/2" 40 2.5x25 65 93 50 10
2" 50 3/8" 64 72 63 40 2" 50 2.5x25 72 107 64 10
2 1/2" 65 3/8" 80 88 70 45 2 1/2" 65 2.5x25 88 133 85 10
3" 80 3/8" 94 102 77 45 3" 80 3x25 95 145 94 10
4" 100 3/8" 118 128 95 50 4" 100 3x25 119 184 124 10
5" 125 3/8" 145 153 108 50 5" 125 3x32 139 213 144 14
6" 150 1/2" 170 178 120 55 6" 150 3x32 160 243 170 14
8" 200 1/2" 222 230 151 65 8" 200 5x50 205 320 222 18
10" 250 1/2" 274 282 182 70 10" 250 5x50 249 390 274 18
12" 300 5/8" 324 332 212 75
14" 350 5/8" 364 372 237 80

57 PRODUCT CATALOG PRODUCT CATALOG 58

ORBIT RC CLAMP ORBIT OHM CLAMP

Material : Carbon Steel Material : Carbon Steel
Finish : Paint, Electro - Galvanized, Hot Dip - Gavanized Finish : Paint, Electro - Galvanized, Hot Dip - Gavanized

STEEL SIZE

STEEL SIZE ORBIT INFRASTRUCTURE
Nut
d
ORBIT INFRASTRUCTUREA d

A B
C

Nominal Pipe Size Steel Size Nut A d Nominal Pipe Size Steel Size A B C d

(inch) (mm) (inch) (mm) (mm) (mm) (inch) (mm) (inch) (mm) (mm) (mm) (mm)

1/2" 15 2x25 5/16"x1" 52 22 1/2" 15 2x25 22 22 54 8
3/4" 20 2x25 5/16"x1" 64 28 3/4" 20 2x25 28 27 60 8
1" 25 2x25 5/16"x1" 70 34 1" 25 2x25 35 34 69 8
1 1/4" 32 2x25 5/16"x1" 78 44 1 1/4" 32 2x25 45 43 79 8
1 1/2" 40 2.5x25 5/16"x1" 84 48.6 1 1/2" 40 2.5x25 50 49 86 10
2" 50 2.5x25 3/8"x1" 96 60 2" 50 2.5x25 60 60 105 10
2 1/2" 65 2.5x25 3/8"x1" 112 76 2 1/2" 65 2.5x25 75 73 120 10
3" 80 3x25 3/8"x1" 130 89 3" 80 3x25 90 89 136 10
4" 100 3x25 3/8"x1" 160 114 4" 100 3x25 115 115 162 10
5" 125 3x32 1/2"x1" 188 140 5" 125 3x32 145 142 195 14
6" 150 3x32 1/2"x1" 217 165 6" 150 3x32 170 170 222 14
8" 200 3x38 1/2"x1" 278 220 8" 200 5x50 222 220 288 18
10" 250 5x50 5/8"x1" 348 274 10" 250 5x50 275 273 334 18
12" 300 6x50 5/8"x1" 403 324 12" 300 6x50 325 324 420 22
14" 350 9x50 5/8"x1" 448 364 14" 350 9x50 360 356 469 22

59 PRODUCT CATALOG PRODUCT CATALOG 60

ORBIT LEVEL PIPE CLAMP STEEL SIZE ORBIT DUCT CLAMP

Material : Carbon Steel Material : Carbon Steel
Finish : Paint, Electro - Galvanized, Hot Dip - Gavanized Finish : Paint, Electro - Galvanized, Hot Dip - Gavanized

B ROD SIZE

Steel size
NUT

A
ORBIT INFRASTRUCTUREPLATE SIZE ORBIT INFRASTRUCTURE
3x32 mm. d
A
DDIA HOLE

C

D
C

Nominal Pipe Size Steel Size A B C (mm) D Dia Hole Nominal Pipe Size Rod Size A C D d Nut Steel
Size
(inch) (mm) (mm) (mm) (inch) PLC-M PLC-L (mm) (mm) (inch) (mm) (inch) (mm) (mm) (mm) (mm) (mm) (inch)
(mm)
1/2" 15 2x25 22 3/8" 120 150 18 10 2" 50 3/8" 9.5 94 85 51 64 5/16x1"
3/4" 20 2x25 28 3/8" 120 150 20 10 2 1/2" 60 1/2" 12.7 110 106 63 80 3/8"X1" 3x32
1" 25 2x25 35 3/8" 120 150 25 10 80 1/2" 12.7 124 118 68 94 3/8"x1" 3x32
1 1/4" 32 2x25 44 3/8" 120 150 30 10 3" 100 1/12" 12.7 160 146 83 120 3/8"x1" 3x32
1 1/2" 40 2x25 50 3/8" 120 150 33 10 4" 125 5/8" 15.9 184 173 98 144 1/2"x1" 3x32
2" 50 2.5x25 64 3/8" 120 150 35 10 5" 150 5/8" 15.9 210 201 113 170 1/2"x1" 3x38
2 1/2" 65 2.5x25 80 3/8" 120 150 38 10 6" 200 5/8" 15.9 262 252 138 222 1/2"x1" 3x38
3" 80 2.5x25 90 3/8" 120 150 42 10 8" 250 5/8" 15.9 324 300 160 274 1/2"x1" 3x38
4" 100 2.5x25 118 3/8" 120 150 55 14 10" 3x38
5" 125 3x32 144 1/2" 160 60 14
6" 150 3x32 170 1/2" - 180 65 14
8" 200 3x32 222 1/2" - 200 70 14
-

61 PRODUCT CATALOG PRODUCT CATALOG 62

ORBIT FLEXIBLE CLAMP - B ORBIT RC CLAMP - B

Material : Carbon Steel Material : Carbon Steel
Finish : Paint, Electro - Galvanized, Hot Dip - Gavanized Finish : Paint, Electro - Galvanized, Hot Dip - Gavanized

STEEL SIZE A
d STEEL SIZE
NUT+BOLT
ORBIT INFRASTRUCTURE
NUT L ORBIT INFRASTRUCTURE
DEYE NUT
C
B

A
H

Nominal Pipe Size Steel Size Nut+bolt A H L d

Nominal Pipe Size A B C D Nut Eye Nut Steel Size (mm) (inch) (mm) (mm) (mm) (mm)

(inch) (mm) (mm) (mm) (mm) (mm) (inch) (inch) (mm) (inch) (mm) 2x25 5/16" 60 50 60 22
2x25 5/16" 68 50 60 28
2" 50 67 30 183 216 3/8"x1" 3/8" 2x25 1/2" 15 2x25 5/16" 70 50 80 35
2 1/2" 65 79 30 209 248 3/8"x1" 3/8" 2.5x25 3/4" 20 2x25 5/16" 78 50 80 45
80 85 30 212 253 3/8"x1" 3/8" 2.5x32 1" 25 2.5x25 5/16" 84 60 80 50
3" 100 123 50 220 281 3/8"x1" 3/8" 2.5x32 1 1/4" 32 2.5x25 5/16" 96 60 100 60
4" 125 144 50 242 314 3/8"x1" 3/8" 3x32 1 1/2" 40 2.5x25 5/16" 112 60 100 75
5" 150 170 50 255 340 1/2x1" 1/2" 3x32 2" 50 3x25 3/8" 130 60 100 90
6" 175 222 50 281 392 1/2"x1" 1/2" 3x38 2 1/2" 65 3x25 3/8" 160 70 120 115
8" 250 274 50 307 444 1/2"x1" 5/8" 3x50 3" 80 3x32 3/8" 188 70 120 145
10" 4" 100 3x32 1/2" 216 70 120 170
5" 125 5x50 1/2" 328 80 140 222
6" 150 5x50 5/8" 408 80 150 274
8" 200 6x50 5/8" 468 100 150 324
10" 250 9x50 3/4" 518 100 150 364
12" 300
14" 350

63 PRODUCT CATALOG PRODUCT CATALOG 64

ORBIT RC CLAMP - C ORBIT SPRING CLAMP PLIER

Material : Carbon Steel • Automotive spring clamp pliers.
Finish : Paint, Electro - Galvanized, Hot Dip - Gavanized • Suitable for diy or professional garage use.
• Design for maximum grip on any type of spring clamp available.
NUT+BOLT • Made from high grade steel with automatic latch lock to keep
d STEEL SIZE
perfect gripping power.

• Pliers come with rubber grip preventing slipping from oil residue.

ORBIT INFRASTRUCTUREL ORBIT FLEXIBLE SPRING CLAMP PLIER

H • Designed for removal and installations of various hose

Nominal Pipe Size Steel Size Nut+bolt L H d clamp styles with size rang 0-75 mm.

(inch) (mm) (mm) (inch) (mm) (mm) (mm) • Flexible cable allows extra reach for difficult and hard to reach ORBIT TOOLS

1/2" 15 2x25 5/16" 60 50 22 applications.
3/4" 20 2x25 5/16" 60 50 28
1" 25 2x25 5/16" 80 50 35 • Includes 3 different hose clamp heads
1 1/4" 32 2x25 5/16" 80 50 45
1 1/2" 40 2.5x25 5/16" 80 60 50 Quick and easy interchangeable heads
2" 50 2.5x25 5/16" 100 60 60
2 1/2" 65 2.5x25 5/16" 100 60 76 • Ratcheting and locking mechanism secures clamp while
3" 80 3x25 3/8" 100 60 90
4" 100 3x25 3/8" 120 70 114 maneuvering.
5" 125 3x32 3/8" 120 70 144
6" 150 3x32 1/2" 150 80 168 • Ergonomic handle features non-slip grip finish.
8" 200 5x50 1/2" 150 80 222
ORBIT EAR CLAMP PLIER

• Automotive Ear clamp pliers
• Suitable for Installs quick clamps garage use.
• Made from high grade steel
• Pliers come with rubber grip preventing slipping from oil

residue.

• The slim head permits good accessibility in confined areas

65 PRODUCT CATALOG PRODUCT CATALOG 66

ORBIT FLEXIBLE SHAFT DIGITAL TORQUE WRENCH 3/8" Dr. Digital Torque Wrench
SCREWDRIVER 50 CM  WITH SOCKET
Digital torque wrench 12-60 Nm, size 3/8 "Professional, easy to Accuracy 2%
• Flexible shaft screwdriver. (Shaft Length:50 cm) use and practical, good quality, good functionality. Digital display,
• With 1/4", 5/16" and 7 mm sockets. LED light with sound, can convert units N.m, ft.lb, in.lb, kg.cm, Display Range 0.6-60Nm
• Comfortable, high grip, textured handle in neutral. head can be changed. Can be used with die-cut heads or dissec-
tion rings. It is a professional tool. Alarm Range 3-60Nm
ORBIT FLEXIBLE SHAFT
SCREWDRIVER WITH SOCKET Accuracy Range 12-60Nm

• Flexible shaft screwdriver for narrow spaces Preset 10
• With 1/4", 5/16" & 7 mm sockets Suitable for wide of
Resolution 0.1Nm
applications
Memory 100 (10memory for each preset)
• Comfortable, high grip, textured handle in neutral.
Unit Nm. lb-ft. lb-in. Kg-m. Kg-cm
RATCHET AND SOCKET SET
Mode Peak/Track
SWP Series Installation Tools
3/8” 3” extension bar Length (mm) 230
3/8” 6” extension bar
3/8” universal joint Backlight Yes (Positive)
Socket: 6 mm, 8 mm, 10 mm,12 mm
Out diemension: 260 x 135 x 60 mm Battery AAA*2pcs

Battery Life 50hrs

Auto Shout Off 70seconds

Storage Temp -20ºC -70ºC (-4 ºF-157.9ºF)

Operating -10ºC-60 ºC (14ºF-139.9 ºF)

Operating Humidity 15-90% noncondensing

ORBIT TOOLS BANDING TOOL Material : Alloy ORBIT TOOLS
Unit Weight : 1.76Kg
The main body is by alloy steel, with high strength and Size : 42CM x 28CM x 22CM
hardness, the tools are wear resistant and long life span.
The tool is easy to operate, and time-saving. Anti-slip Bands Size for Cutting
handle with PVC , the handle is safe and comfortable to Width : 4.6 mm – 19 mm
operate. Thickness : 0.25mm - 1.0mm
How to use?
1. Thread band through buckle from hole to ears.
2. Fold band end under buckle. Make sure the strap is longer than
the buckle, then flatten to secure.
3. Clamp the assembled band around the designated area by thread-
ing through the buckle hole.
4. Place the band end in the banding tool. Turn the tension handle

clockwise to tighten.
5. Once done, flip the tool over the buckle.
6. Pull the lever to cut the excess band end.
7. Hammer buckle ears down to secure the remaining band end.

67 PRODUCT CATALOG PRODUCT CATALOG 68

ORBIT ORIGINAL ORBIT CLAMPS KIT ORBIT OBBS ZINC PLATED (CR3) ORBIT ORIGINAL

ORBIT CLAMPS KIT, Hose clamps are available in various sizes, • A box of hose clamps available from 12-35 mm
packed in a transparent box that’s specially made for storing • All parts are manufactured from zinc plated steel, chromium 3
hose clamps. Strong and durable in a compact size that makes • There are 69 pieces in total, Flexible screw driver 7 mm
them easy to store. FREE “ORBIT Flexible Screw Driver” that
comes in the set. Convenient to use with the hose clamp Hose clamp in the box
immediately.
9.5-12 mm I 10 pcs 11-16 mm I 10 pcs 13-20 mm I 20 pcs
16-22 mm I 8 pcs 18-25 mm I 8 pcs 22-30 mm I 8 pcs
25-35 mm I 5 pcs

ORBIT OBBS ZINC PLATED (CR6)

• A box of hose clamps available from 12-35 mm
• All parts are manufactured from zinc plated steel, chromium 6
• There are 69 pieces in total, Flexible screw driver 7 mm

Hose clamp in the box

9.5-12 mm I 10 pcs 11-16 mm I 10 pcs 13-20 mm I 20 pcs
16-22 mm I 8 pcs 18-25 mm I 8 pcs 22-30 mm I 8 pcs
25-35 mm I 5 pcs

ORBIT INDUSTRIAL ORBIT INDUSTRIAL

ORBIT GRIP 9.5 mm

• A box of hose clamps available from 12-40  mm / Bandwidth 9.5 mm
• All parts are manufactured from 430 stainless steel, Except screws

made from steel

• There are 75 pieces in total, Flexible screw driver 7 mm

Hose clamp in the box

8 - 12 mm I 10 pcs 10-16 mm I 10 pcs 12-20 mm I 20 pcs
12-22 mm I 10 pcs 16-25 mm I 10 pcs 20-32 mm I 10 pcs
25-40 mm I 5 pcs