Marantz NA6006 EN

Contents Connections Playback Settings Tips Appendix
.

Network Audio Player

NA6006

Owner’s Manual

Front panel Rear panel Remote control 1 Index
unit

Contents Connections Playback Settings Tips Appendix

Accessories 7 Connections 21
Inserting the batteries 22
Operating range of the remote control unit 8 23
8 Connecting an amplifier 24
Features 9 Connecting to a device with digital audio input connectors 25
High quality sound 9 Connecting to a device with digital audio output connectors 25
High performance 10 Connecting a USB memory device to the USB port 26
12 Connecting to a home network (LAN) 27
Part names and functions 12 Wired LAN 27
Front panel 14 Wireless LAN 28
Rear panel 16 Connecting an external control device
Remote control unit
REMOTE CONTROL connectors

Connecting the power cord

Front panel Rear panel Remote control 2 Index
unit

Contents Connections Playback Settings Tips Appendix

Playback AirPlay function 55
Playing songs from your iPhone, iPod touch or iPad 56
Basic operation 56
Turning the power on 30 Playing iTunes music with this unit
Switching the power to standby 30 Perform iTunes playback operations with the remote control unit 57
Selecting the input source 30 of this unit 58
31 Spotify Connect function 58
Listening to Internet Radio 32 Playing Spotify music with this unit 59
Listening to Internet Radio 33 Convenience functions 59
34 Adding to HEOS Favorites 60
Playing back files stored on PC or NAS 35 Playing back HEOS Favorites 60
Playing back files stored on PC or NAS 37 Deleting a HEOS Favorites 60
38 Switching the display’s brightness 61
Playing a USB memory device 40 Using the sleep timer 61
Playing files stored on USB memory devices 41 Stopping digital outputs
42
Listening to music on a Bluetooth device 43
Listening to music on a Bluetooth device 44
Pairing with other Bluetooth devices 45
Reconnecting to this unit from a Bluetooth device 46
49
Getting the HEOS App 53
HEOS Account 54
Playing from streaming music services
Listening to the same music in multiple rooms

Using as a D/A converter
Connect and playback from a digital device (Optical)

Front panel Rear panel Remote control 3 Index
unit

Contents Connections Playback Settings Tips Appendix

Settings Network 78
Network Information 78
Menu map 78
Menu operation 62 Wi-Fi 78
67 Bluetooth 79
Inputting characters 68 Network Control 79
Using the number buttons 68 Friendly Name 80
Using the cursor buttons 69 Connection 83
70 Settings 84
Audio 70 Diagnostics
Filter 70
Lock Range 71
Variable Out 71
Volume Limit 71
Phones 72
H/P Amplifier Gain 73
73
General 73
Language 74
Auto-Standby 74
Usage Data 77
Firmware 77
Information
Reset

Front panel Rear panel Remote control 4 Index
unit

Contents Connections Playback Settings Tips Appendix

HEOS Account 85 Tips 88
89
You have not signed in 85
85 Contents
You have already signed in
Tips
Switching the function of the volume buttons on the remote
control 86 Troubleshooting 91

Setting the remote control operation mode to network audio Power does not turn on / Power is turned off 92
player operation mode
87 Operations cannot be performed through the remote control unit 93
Setting the remote control operation mode to amplifier operation
mode 87 Display on this unit shows nothing 93
No sound comes out 94

Sound is interrupted or noise occurs 95

Desired sound does not come out 96

AirPlay cannot be played back 96

USB memory devices cannot be played back 98

Bluetooth cannot be played back 99

The Internet radio cannot be played back 100

Music files on PC or NAS cannot be played back (Music server) 101

Various online services cannot be played 102

Cannot connect to a wireless LAN network 102

Audio from digital devices cannot be played back (Optical) 103

Update/upgrade error messages 104

Resetting network settings 105

Front panel Rear panel Remote control 5 Index
unit

Contents Connections Playback Settings Tips Appendix

Appendix 106
107
Playing back a USB memory devices 108
D/A converter 109
Playing back a Bluetooth device 110
Playing back files stored on a PC and NAS 111
Playing back Internet Radio 114
Explanation of terms 115
Trademark information 120
Specifications 122
Index
License

Front panel Rear panel Remote control 6 Index
unit

Contents Connections Playback Settings Tips Appendix

Thank you for purchasing this Marantz product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.

Accessories

Check that the following parts are supplied with the product.

.

Quick Start Guide Safety Instructions Cautions on Using Batteries Notes on radio

Power cord Remote control unit R03/AAA batteries Audio cable
(RC005NA)

Remote connector cable External antennas for
Bluetooth/wireless connectivity

Front panel Rear panel Remote control 7 Index
unit

Contents Connections Playback Settings Tips Appendix

Inserting the batteries NOTE
0 To prevent damage or leakage of battery fluid:
1 Remove the rear lid in the direction of the arrow and
remove it. 0 Do not use a new battery together with an old one.
0 Do not use two different types of batteries.
0 Remove the batteries from the remote control unit if it will not be in use for long
periods.
0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.

Operating range of the remote control
unit

Point the remote control unit at the remote sensor when operating it.
.. .
2 Insert two batteries correctly into the battery
compartment as indicated.
Batteries

Approx. 7 m

30° 30°

3 Put the rear cover back on.

Front panel Rear panel Remote control 8 Index
unit

Contents Connections Playback Settings Tips Appendix

Features

High quality sound 0 Low noise amp due differential input HDAM, and equipped with a
low distortion filter circuit due to high speed HDAM®SA2 delivery
0 High Sound Quality Parts Employed amp
The unit’s features the same audiophile-grade film capacitors,
electrolytic capacitors and MELF resistors specifically used in top-range 0 Double-layered chassis
models.
0 Marantz unique filtering technology (MMDF: Marantz Musical
0 Peripheral circuitry off function minimizes audio output signal Digital Filtering)
interference This unit is equipped with oversampling and digital filter functions using
This unit has functions to turn off the Wi-Fi, Bluetooth, headphones an original algorithm created by Marantz. The unit supports PCM signal.
output circuit, variable audio output circuit and digital output circuit and Toggle between the two types to suit your preferences.
clear the display to prevent noise from surrounding circuits from
entering the audio signal output from the unit. 0 High grade headphone circuit
The high-grade headphone circuit incorporates HDAM®SA2 amplifier to
enable headphone listening of high quality sound reproduction, late at
night or in other such situations.

Front panel Rear panel Remote control 9 Index
unit

Contents Connections Playback Settings Tips Appendix

High performance 0 The device is equipped with a AirPlay® function in addition to
network functions such as Internet radio etc.
0 Support for High Quality Audio playback via USB and networks You can enjoy a wide variety of content, including listening to Internet
This unit supports the playback of high resolution audio formats such as Radio, playing audio files stored on your PC. This unit also supports
DSD (2.8/5.6 MHz) and WAV/FLAC/Apple Lossless Audio Codec Apple AirPlay which lets you stream your music library from an iPhone®,
(ALAC) files up to 192 kHz/24 bits. iPad®, iPod touch® or iTunes®.

0 Can be used as a D/A convertor (Optical) 0 Wireless connection with Bluetooth devices can be carried out
Digital audio signals input from an external device into this unit can be easily
converted and output as analog signals using this unit’s D/A converter. You can enjoy music simply by connecting wirelessly with your
smartphone, tablet, PC, etc.

0 Support for Gapless playback
Playback with no gap between music files.
(for WAV/FLAC/Apple Lossless/DSD only)

0 Compatible with the HEOS Appz for performing basic operations
of the unit with an iPad, iPhone or Android™ devices (Google,
Amazon Kindle Fire)
z Download the appropriate HEOS App for your iOS or Android devices. This unit
needs to be connected to the same LAN or Wi-Fi (wireless LAN) network that
the iPhone or iPod touch is connected to.

Front panel Rear panel Remote control 10 Index
unit

Contents Connections Playback Settings Tips Appendix

0 HEOS provides streaming music from your favorite online music 0 Headphone Amplifier Gain selector function
sources This unit has a gain control function with three levels that can be
switched according to the characteristics of the connected headphones.
.
0 Equipped with analog audio output connectors (VARIABLE)
HEOS wireless multi-room sound system that enables you to enjoy your In addition to the normal analog audio output connectors (FIXED), this
favorite music anywhere and everywhere around your home. By utilizing unit is equipped with analog audio output connectors (VARIABLE) that
your existing home network and the HEOS App (available for iOS, allow you to adjust the volume of the audio signal output from this unit.
Android and Amazon devices), you can explore, browse, and play These can be connected to the Power Amplifier to adjust the volume.
music from your own music library or from many online streaming music
services. 0 OLED (Organic Light Emitting Diode) display that can display 3
lines
When multiple HEOS devices are connected to the same network,
HEOS devices can be grouped to play back the same music on all 0 Equipped with auto standby mode function that reduces power
devices simultaneously, or different music can be played on each consumption
separate HEOS device.

Front panel Rear panel Remote control 11 Index
unit

Contents Connections Playback Settings Tips Appendix

Part names and functions

Front panel

q wer ty u io

Q0 Q1 Q2. Q3 Q4

A Power operation button (X) B Power indicator
This turns the power on/off (standby). (v p. 30) This is lit as follows according to the power status:
0 Off: Power on
0 Red: Normal standby
0 Orange: Standby when the following settings are configured
0 When “Network Control” is set to “On”
(v p. 79)

Front panel Rear panel Remote control 12 Index
unit

Contents Connections Playback Settings Tips Appendix

q wer ty u i o I System buttons
These perform playback related operations.
. Q0 Q1 Q2 Q3 Q4 0 Play button (1)
0 Pause button (3)
C Cursor buttons (uio p) 0 Skip buttons (8, 9)
0 Stop button (2)
These select items.
J BACK button
D ENTER button Returns to the previous item.

This determines the selection. K USB port (T)
This is used to connect USB storages (such as USB memory devices).
E Digital output off indicator (DIG. OUT OFF) (v p. 24)

This indicator lights up when the digital output setting is set to off. L INPUT button
(v p. 61) This selects the input source. (v p. 31)

F DISPLAY OFF indicator M Headphones jack (PHONES)
Used to connect headphones.
This indicator lights up when the display is off.
(v p. 60) NOTE

G Remote control sensor 0 To prevent hearing loss, do not raise the volume level excessively when using
This receives signals from the remote control unit. (v p. 8) headphones.

N Headphone volume control knob (LEVEL)
Adjusts the headphone volume.

H Display

This displays various pieces of information.

Front panel Rear panel Remote control 13 Index
unit

Contents Connections Playback Settings Tips Appendix

Rear panel

. qw e rt y u iq

For details, see the next page.

Front panel Rear panel Remote control 14 Index
unit

Contents Connections Playback Settings Tips Appendix

qw e rt y u iq B AUDIO OUT connectors
.. Used to connect devices equipped with analog audio inputs connectors
A Bluetooth/wireless LAN antenna connectors or an external power amplifier. (v p. 21)

Used to connect the included external antennas for Bluetooth/wireless C NETWORK connector
connectivity when connecting to a network via wireless LAN, or when Used to connect to a LAN cable when connecting to a wired LAN
connecting to a handheld device via Bluetooth. (v p. 26) network. (v p. 25)
A Place the external antennas for Bluetooth/wireless connectivity
D DIGITAL AUDIO OUT connector
evenly over the screw terminal of rear. Used to connect an AV receiver or D/A converter that has a digital input
B Turn clockwise until the antennas is fully connected. connectors. (v p. 22)
C Rotate the antenna upwards for best reception.
E DIGITAL AUDIO IN connector
q we Connecting to a device with digital audio output connectors.
(v p. 23)

F REMOTE CONTROL connectors
Used to connect to a Marantz audio device that is compatible with the
remote control function. (v p. 27)

G EXTERNAL/INTERNAL switch
Turn this switch to “EXTERNAL” to operate the unit by pointing the
remote control at the amplifier connected to this unit using the remote
control connection. (v p. 27)

H AC inlet (AC IN)
Used to connect the power cord. (v p. 28)

Front panel Rear panel Remote control 15 Index
unit

Contents Connections Playback Settings Tips Appendix

Remote control unit

q o Operating this unit

w A Remote control signal transmitter
e This transmits signals from the remote control unit. (v p. 8)
r
B Power operation button (POWER X)
t This turns the power on/off (standby). (v p. 30)
y
C SLEEP button
This sets the sleep timer. (v p. 61)

D Input source select buttons
These select the input source. (v p. 31)

E FAVORITES CALL / ADD buttons
This allows you to register content to “HEOS Favorites” and call
registered content.
0 “Adding to HEOS Favorites” (v p. 59)
0 “Playing back HEOS Favorites” (v p. 60)

F System buttons
These perform playback related operations.

Front panel Rear panel Remote control 16 Index
unit

Contents Connections Playback Settings Tips Appendix

u G QUEUE button
i This displays the queue.
o 0 “Listening to Internet Radio” (v p. 32)
Q0 0 “Playing back files stored on PC or NAS” (v p. 34)
0 “Playing a USB memory device” (v p. 37)
Q1
H ENTER button
Q2 This determines the selection.
Q3
I Cursor buttons (uio p)
These select items.

J BACK button
Returns to the previous item.

K Number/letter buttons (0 – 9, +10)
These enter letters or numbers into the unit. (v p. 68)

L Digital audio output switch button (DIG. OUT)
This switches the digital audio out on/off. (v p. 61)

M RANDOM button (P)
Switches the random playback.

Front panel Rear panel Remote control 17 Index
unit

Contents Connections Playback Settings Tips Appendix

Q4 N DIMMER button
Adjust the display brightness of this unit. (v p. 60)

O VOLUME buttons (df)
These adjust the volume of the audio signal output from the analog
audio output terminals (VARIABLE) of this unit. (v p. 86)

P OPTION button
0 This displays the option menu on the display.

Q5 0 An option menu is not displayed for some input sources.
Q6 Q MUTE button (:)
Q7
This mutes the audio signal output from the analog audio output
Q8 terminals (VARIABLE) of this unit. (v p. 86)

Q9 R SETUP button
W0 The setting menu is displayed on the display. (v p. 62)
W1
S CLEAR button
This cancels the settings.

T Information button (INFO)
This switches the track information shown in the display during
playback.

U REPEAT button (L)
Switches the repeat playback.

Front panel Rear panel Remote control 18 Index
unit

Contents Connections Playback Settings Tips Appendix

e o Amplifier operations

A Marantz amplifier can be operated.
A INPUT buttons (df)
B MUTE button (:)
C Power operation button (AMP POWER X)

D SOURCE DIRECT button
E VOLUME buttons (df)

r 0 The remote control may not operate some products.
qt 0 2 and 5 can be operated when the remote control operation mode is set to
w
amplifier operation mode (factory default setting). (v p. 86)

Front panel Rear panel Remote control 19 Index
unit

Contents Connections Playback Settings Tips Appendix

o Contents 21 o Cables used for connections
22
Connecting an amplifier 23 Provide necessary cables according to the devices you want to
Connecting to a device with digital audio input connectors 24 connect.
Connecting to a device with digital audio output connectors 25
Connecting a USB memory device to the USB port 27 Audio cable (supplied) L L
Connecting to a home network (LAN) 28 R R
Connecting an external control device Remote connector cable
Connecting the power cord (supplied) . . ..
Optical cable
NOTE (Sold separately)

0 Do not plug in the power cord until all connections have been completed. LAN cable (Sold separately)
0 Do not bundle power cords with connection cables. Doing so can result in

humming or noise.

Front panel Rear panel Remote control 20 Index
unit

Contents Connections Playback Settings Tips Appendix

Connecting an amplifier

In addition to the normal analog audio output connectors (FIXED) this unit has analog audio output connectors (VARIABLE) that allow you to adjust the
volume of the audio signal output from this unit. Connect the power amplifier to the analog audio output connectors (VARIABLE) and press the VOLUME
df buttons on the remote control to adjust the volume of the audio signal output from this unit.

Pre Power
Amplifier Amplifier

AUDIO AUDIO
IN IN

RL RL

RL RL

RL RL

.

NOTE

0 To adjust the volume of the audio signal output from the analog audio output connectors (VARIABLE) of this unit using the remote control, set the remote control operation
mode of the volume buttons to network audio player operation mode. (v p. 86)

0 An audio signal is not output from the variable audio output connectors (VARIABLE) when “Variable Out” is set to “Off” in the menu. (v p. 71)
0 Do not connect a power amplifier to the analog audio output connectors (FIXED). Connecting a power amplifier may cause damage to the speakers.

Front panel Rear panel Remote control 21 Index
unit

Contents Connections Playback Settings Tips Appendix

Connecting to a device with digital audio input connectors

You can enjoy digital audio playback by connecting an AV receiver or D/A converter that has a digital audio terminal to this unit.

AV receiver /
D/A converter

OPTICAL
IN

.

NOTE

0 Digital audio output stops during playback of the DSD files via USB and networks.
0 Use the DIG. OUT button to set the digital audio output on or off. (v p. 61)

Front panel Rear panel Remote control 22 Index
unit

Contents Connections Playback Settings Tips Appendix

Connecting to a device with digital audio output connectors

Use this connection to input digital audio signals to this unit, and convert the signals for playback using the D/A converter of this unit. (v p. 53)

CD transport /
Digital device

OPTICAL
OUT

.

o Specifications of supported audio formats

See “D/A converter” (v p. 107).

Front panel Rear panel Remote control 23 Index
unit

Contents Connections Playback Settings Tips Appendix

Connecting a USB memory device to the USB port

For operating instructions see “Playing a USB memory device”. (v p. 37)

USB memory
device

.

0 Marantz does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter,
use that device’s supplied AC adapter.

NOTE
0 USB memory devices will not work via a USB hub.
0 Do not use an extension cable when connecting a USB memory device. This may cause radio interference with other devices.

Front panel Rear panel Remote control 24 Index
unit

Contents Connections Playback Settings Tips Appendix

Connecting to a home network (LAN)

This unit can connect to a network using a wired LAN or wireless LAN. Wired LAN
You can connect this unit to your home network (LAN) to enable various
types of playback and operations as described below. To make connections via wired LAN, use a LAN cable to connect the
0 Playback of network audio such as Internet Radio and from your media router to this unit as shown in the figure below.

server(s) NAS
0 Playback of streaming music services
0 Using the Apple AirPlay function (Network Attached
0 Operation on this unit via the network PC Storage)
0 Operation with the HEOS wireless multi-room sound system
0 Firmware Update Modem

Internet

For connections to the Internet, contact an ISP (Internet Service To WAN side
Provider) or a computer shop.
To LAN port
To LAN port LAN port/ LAN port/
Ethernet Ethernet
connector connector

Router

.

Front panel Rear panel Remote control 25 Index
unit

Contents Connections Playback Settings Tips Appendix

Wireless LAN 0 When using this unit, we recommend you use a router equipped with the following
functions:
When connecting to the network via wireless LAN, connect the external
antennas for Bluetooth/wireless connectivity connection to the rear panel 0 Built-in DHCP server
and stand them upright. This function automatically assigns IP addresses on the LAN.
See “Wi-Fi Setup” on how to connect to a wireless LAN router.
(v p. 80) 0 Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a
Internet speed of 100 Mbps or greater.

Modem 0 Only use a shielded STP or ScTP LAN cable (readily available at electronics
stores). (CAT-5 or greater recommended)
To WAN side
0 The normal shielded-type LAN cable is recommended. If a flat-type cable or
Router with access point unshielded-type cable is used, other devices could be affected by noise.

0 When using this unit connected to a network with no DHCP function, configure the
IP address, etc. in “Network”. (v p. 78)

NOTE

0 The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.

0 This unit is not compatible with PPPoE. A PPPoE compatible router is required if
your contracted line is not set using PPPoE.

0 Do not connect a NETWORK connector directly to the LAN port/ Ethernet
connector on your computer.

0 Various online services may be discontinued without prior notice.
0 Do not carry this unit by the antenna.

.

Front panel Rear panel Remote control 26 Index
unit

Contents Connections Playback Settings Tips Appendix

Connecting an external control device Remote Set to
connector cable “EXTERNAL”.
REMOTE CONTROL connectors
(supplied)
If this unit is connected to a Marantz amp, the amp can be controlled via
this unit using the HEOS App. Also, remote control signals received by the
amp can be used to control this unit. Next, configure the “Connection” and
“Setting”.

o Connection

Use the supplied remote connector cable to connect the REMOTE
CONTROL IN connector of this unit to REMOTE CONTROL OUT
connector of the amplifier.

o Setting

Turn the EXTERNAL/INTERNAL switch on the unit to “EXTERNAL”.
0 This setting will disable remote sensor reception of this unit.
0 To operate the unit, point the remote control at the remote sensor of

the amplifier.

0 To use this unit by itself without connecting an amplifier, turn the switch to Amplifier
“INTERNAL”.

Front panel Rear panel Remote control 27 Index
unit

Contents Connections Playback Settings Tips Appendix

Connecting the power cord

After completing all the connections, insert the power plug into the power outlet.

To household power outlet Power cord (supplied)
(AC 230V, 50/60Hz)

.

Front panel Rear panel Remote control 28 Index
unit

Contents Connections Playback Settings Tips Appendix

o Contents 37
40
Basic operation 30 Playback a device 53
30
Turning the power on 31 Playing a USB memory device 59
Switching the power to standby Listening to music on a Bluetooth device 60
Selecting the input source Using as a D/A converter 60
60
Playback network audio/service 32 Convenience functions 61
34 61
Listening to Internet Radio 44 Adding to HEOS Favorites
Playing back files stored on PC or NAS 55 Playing back HEOS Favorites
Getting the HEOS App 58 Deleting a HEOS Favorites
AirPlay function Switching the display’s brightness
Spotify Connect function Using the sleep timer
Stopping digital outputs

Front panel Rear panel Remote control 29 Index
unit

Contents Connections Playback Settings Tips Appendix

Basic operation

POWER X Turning the power on

Input source 1 Press POWER X to turn on power to the unit.
select buttons The power indicator turns off.

13 0 You can also press X on the main unit to turn on power from standby mode.
0 You can also press 1/3 to turn on power from standby mode.

Switching the power to standby

1 Press POWER X.
The unit switches to standby mode.

0 You can also switch the power to standby by pressing X on the main unit.

NOTE
0 Power continues to be supplied to some of the circuitry even when the power is in

the standby mode. When leaving home for long periods of time or when going on
vacation, unplug the power cord from the power outlet.

.

Front panel Rear panel Remote control 30 Index
unit

Contents Connections Playback Settings Tips Appendix

Selecting the input source

1 Press the input source select button to be played back.
The selected input source appears on the display.

0 You can also select the input source by pressing INPUT on the main unit.

Front panel Rear panel Remote control 31 Index
unit

Contents Connections Playback Settings Tips Appendix

Listening to Internet Radio

INTERNET RADIO FAVORITES 0 Internet Radio refers to radio broadcasts distributed over the Internet.
ADD Internet Radio stations from around the world can be received.
FAVORITES
CALL 9 0 The Internet Radio station list on this unit the database service provided
8 13 by TuneIn Radio service.

2 0 The audio format types and specifications supported by this unit for
playback are as follows.
QUEUE See “Playing back Internet Radio” (v p. 110) for details.
ui
0 WMA
ENTER 0 MP3
BACK 0 MPEG-4 AAC

INFO

.

Front panel Rear panel Remote control 32 Index
unit

Contents Connections Playback Settings Tips Appendix

Listening to Internet Radio

1 Press INTERNET RADIO. 0 Any characters that cannot be displayed are replaced with “.” (period).
2 Select the station you want to play.
NOTE
0 The radio station database service may be suspended or be otherwise unavailable

without notice.

Operation buttons Function

1/3z Playback / Pause
2 Stop

89z Skip to previous track / Skip to next track
ui Select the item

ENTER Enter the selected item / Playback

BACK Moving up a level in the hierarchy

FAVORITES CALL Call from the “HEOS Favorites”
(v p. 60)

FAVORITES ADD Adding to “HEOS Favorites”
(v p. 59)

INFO Switching the radio station name and file
format

QUEUE This displays the queue

z Enabled when playing Podcasts.

Front panel Rear panel Remote control 33 Index
unit

Contents Connections Playback Settings Tips Appendix

Playing back files stored on PC or NAS

8 MUSIC SERVERS 0 This unit can play back music files and playlists (m3u, wpl) from DLNA
13 compatible servers including PCs and NAS devices on your network.
2 9
0 The audio format types and specifications supported by this unit for
QUEUE playback are as follows.
ui See “Playing back files stored on a PC and NAS” (v p. 109) for
details.
ENTER
BACK 0 WMA
0 MP3
0 WAV
0 MPEG-4 AAC
0 FLAC
0 Apple Lossless
0 DSD

RANDOM INFO
REPEAT

.

Front panel Rear panel Remote control 34 Index
unit

Contents Connections Playback Settings Tips Appendix

Playing back files stored on PC or NAS 3 Browse the music on your PC/NAS and select
something to play.
Use this procedure to play music files or playlists stored on DLNA files
servers on your local network. 0 When you select something to play you will be asked how you want to
queue up your music.
1 Press MUSIC SERVERS to switch the input source to
“Music Servers”. Play Now: Inserts the item into the queue after the
currently playing track and plays the
2 Select the name of your networked PC or NAS Play Now & Replace selected item immediately.
(Network Attached Storage) server. Queue:
Clears the queue and plays the
Play Next: selected item immediately.

Add to End of Queue: Inserts the item into the queue after the
current song and plays it when the
current song ends.

Adds the item to the end of the queue.

Front panel Rear panel Remote control 35 Index
unit

Contents Connections Playback Settings Tips Appendix

4 Use ui to select the “Play Now” or “Play Now & NOTE
Replace Queue”, then press ENTER.
Playback starts. 0 When playing back music files with your PC or NAS connected through wireless
LAN, audio may be interrupted depending on your wireless LAN environment. In
Operation buttons Function this case, connect using a wired LAN.
1/3 Playback / Pause
2 Stop 0 The order in which the tracks/files are displayed depends on the server
89 Skip to previous track / Skip to next track specifications. If the tracks/files are not displayed in alphabetical order due to the
ui Select the item server specifications, searching by the first letter may not work properly.
ENTER Enter the selected item
BACK Moving up a level in the hierarchy
Repeat playback
REPEAT L 0 Switching between Single-track repeat

RANDOM P and All-track repeat.
INFO
QUEUE Random playback

Switching the album name and file format.
This displays the queue

Front panel Rear panel Remote control 36 Index
unit

Contents Connections Playback Settings Tips Appendix

Playing a USB memory device

USB 1/3 0 Playing back music files stored on a USB memory device.
8 9 0 Only USB memory devices conforming to mass storage class standards

2 ui can be played on this unit.
ENTER 0 This unit is compatible with USB memory devices in “FAT16” or
QUEUE
“FAT32” format.
BACK 0 The audio format types and specifications supported by this unit for

playback are as follows.
See “Playing back a USB memory devices” (v p. 106) for details.

0 WMA
0 MP3
0 WAV
0 MPEG-4 AAC
0 FLAC
0 Apple Lossless
0 DSD

RANDOM INFO
REPEAT

.

Front panel Rear panel Remote control 37 Index
unit

Contents Connections Playback Settings Tips Appendix

Playing files stored on USB memory 4 Browse the music on your USB memory device and
devices select something to play.

1 Insert a USB memory device into the front panel’s USB 0 When you select something to play you will be asked how you want to
port. queue up your music.

2 Press USB to switch the input source to “USB Music”. Play Now: Inserts the item into the queue after the
3 Select the name of this unit. currently playing track and plays the
Play Now & Replace selected item immediately.
Queue:
Clears the queue and plays the
Play Next: selected item immediately.

Add to End of Queue: Inserts the item into the queue after the
current song and plays it when the
current song ends.

Adds the item to the end of the queue.

5 Use ui to select the “Play Now” or “Play Now &
Replace Queue”, then press ENTER.
Playback starts.

Front panel Rear panel Remote control 38 Index
unit

Contents Connections Playback Settings Tips Appendix

Operation buttons Function
1/3 Playback / Pause
2 Stop
89 Skip to previous track / Skip to next track
ui Select the item
ENTER Enter the selected item / Playback
BACK Moving up a level in the hierarchy
Repeat playback
REPEAT L 0 Switching between Single-track repeat

RANDOM P and All-track repeat.
INFO
QUEUE Random playback

Switching the album name and file format.
This displays the queue

NOTE

0 Note that Marantz will accept no responsibility whatsoever for any problems
arising with the data on a USB memory device when using this unit in conjunction
with the USB memory device.

0 When a USB memory device is connected to this unit, the unit loads all of the files
on the USB memory device. Loading may take a while if the USB memory device
contains a large number of folders and/or files.

Front panel Rear panel Remote control 39 Index
unit

Contents Connections Playback Settings Tips Appendix

Listening to music on a Bluetooth device

POWER X Music files stored on Bluetooth devices such as smartphones, digital
music players, etc. can be enjoyed on this unit by pairing and connecting
this unit with the Bluetooth device.

Communication is possible up to a range of about 30 m.

8 Bluetooth NOTE
13
9 0 To play back music from a Bluetooth device, the Bluetooth device needs to
support the A2DP profile.

2
OPTION

INFO

.

Front panel Rear panel Remote control 40 Index
unit

Contents Connections Playback Settings Tips Appendix

Listening to music on a Bluetooth 4 Select this unit when its name appears in the list of
device devices displayed on the screen of the Bluetooth
device.
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit. Connect to the Bluetooth device while “Bluetooth Pairing Mode” is
Once the Bluetooth device has been paired, it does not need to be paired being displayed on the display of the unit.
again. Perform the connection with the Bluetooth device close to the unit
(about 1 m).
1 Prepare for playback.
A Connect the supplied external antennas for Bluetooth/wireless 5 Play music using any app on your Bluetooth device.
connectivity to the Bluetooth/wireless LAN antenna connectors 0 The Bluetooth device can also be operated with the remote
on the rear panel. (v p. 15) control of this unit.
B Press POWER X to turn on power to the unit. 0 The next time the Bluetooth button is pressed on the remote
control unit, this unit automatically connects to the last Bluetooth
2 Press Bluetooth. device that was connected.
When using for the first time, the unit will go into the pairing mode
automatically and “Bluetooth Pairing Mode” will appear on the Operation buttons Function
display of the unit. 1/3 Playback / Pause
2 Stop
3 Activate the Bluetooth settings on your mobile device. 89 Skip to previous track / Skip to next track
Switching the Bluetooth device name and
INFO Album name.

Front panel Rear panel Remote control 41 Index
unit

Contents Connections Playback Settings Tips Appendix

Pairing with other Bluetooth devices NOTE

Pair a Bluetooth device with this unit. 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
1 Activate the Bluetooth settings on your mobile device.
2 Press and hold Bluetooth on the remote control unit for 0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.

at least 3 seconds. 0 For some Bluetooth devices, the volume set on the Bluetooth device is linked with
This unit will go into the pairing mode. that of the audio signal output from the analog audio output terminals (VARIABLE)
of this unit.
3 Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.

0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.

0 You can also enter pairing mode by pressing the OPTION button when the
Bluetooth playback screen is displayed and selecting “Pairing Mode” from the
displayed option menu.

Front panel Rear panel Remote control 42 Index
unit

Contents Connections Playback Settings Tips Appendix

Reconnecting to this unit from a
Bluetooth device

After pairing is completed, the Bluetooth device can be connected without
performing any operations on this unit.
This operation also needs to be performed when switching the Bluetooth
device for playback.

1 If a Bluetooth device is currently connected, deactivate
the Bluetooth setting of that device to disconnect it.

2 Activate the Bluetooth setting of the Bluetooth device
to be connected.

3 Select this unit from the Bluetooth device list on your
Bluetooth device.

4 Play music using any app on your Bluetooth device.

0 When the power of this unit and the Bluetooth function of this unit are turned on,
the input source will be automatically switched to “Bluetooth” if a Bluetooth device
is connected.

0 When the “Network Control” setting of this unit is set to “On” and a Bluetooth
device is connected and is played with the unit in the standby state, the power of
the unit will be turned on automatically. (v p. 79)

Front panel Rear panel Remote control 43 Index
unit

Contents Connections Playback Settings Tips Appendix

Getting the HEOS App

You can use many online music streaming services from the HEOS App. Depending upon your geographical location, there are several options to choose
from.
Download the HEOS App for iOS or Android by searching App Store, Google Play store or Amazon Appstore for “HEOS”.

.

0 Specifications of the HEOS App may be changed without prior notice for improvement purposes.

Front panel Rear panel Remote control 44 Index
unit

Contents Connections Playback Settings Tips Appendix

HEOS Account o Changing your HEOS Account

HEOS Accounts can be registered in “HEOS Account” (v p. 85) in the 1 Tap the “Music” tab.
menu of this unit or by tapping “Music” tab - “Settings” icon a in the 2 Select the Settings icon a in the upper left corner of
HEOS App.
the screen.
o What is a HEOS Account?
3 Select “HEOS Account”.
A HEOS Account is master account or “keychain” for managing all of 4 Change your location, change your password, delete
your HEOS music services with one single username and password.
your account or sign out of your account.
o Why do I need a HEOS Account?

With the HEOS Account you just have to enter your music services
login names and passwords one time. This allows you to easily and
quickly use multiple controller apps on different devices.
You just log into your HEOS Account on any device and you will have
access to all of your associated music services, play history and
custom playlists, even if you are at a friend’s house listening to music
on their HEOS system.

o Signing up for a HEOS Account

You will be instructed to signup for a HEOS Account the first time you
try to access any music service from the main “Music” menu of the
HEOS App. Follow the instructions in the HEOS App to complete the
operation.

Front panel Rear panel Remote control 45 Index
unit

Contents Connections Playback Settings Tips Appendix

Playing from streaming music services Rooms

A music service is an online music company that provides access to vast Drag one room into another to group them
music collections via free and/or paid subscriptions. Depending upon your
geographical location, there are several options to choose from. Dining L + Dining R
Song Name 1
o Selecting a room/device
Kitchen
1 Tap the “Rooms” tab. Select “Marantz NA6006” if there Song Name 2
are multiple HEOS devices.
Marantz NA6006
Song Name 3

0 Tap the Pencil icon e at the top right to switch edit mode. You can change the
displayed name.

Rooms Music Now Playing

.

Front panel Rear panel Remote control 46 Index
unit

Contents Connections Playback Settings Tips Appendix

o Selecting the music track or station from Music
music sources

1 Tap the “Music” tab and select a music source.

0 All music services displayed may not be available in your location.

This Phone

Music Servers USB Music

Playlists History

Rooms Music Now Playing

.

Front panel Rear panel Remote control 47 Index
unit

Contents Connections Playback Settings Tips Appendix

2 Browse the music to play. Album Now Playing
After selecting a music track or radio station the app will
automatically change to the “Now Playing” screen. Artist
Album
10 Tracks,60 Mins.,2014

0 When you select a music track to play you will be asked how you want to Track 01
queue up your music. Rooms

Inserts the item into the queue after the Play Now 0:50 -2:51
currently playing track and plays the Play Now & Replace Queue
Play Now: selected item immediately. Track 01
Play Next Artist
Play Now & Replace Clears the queue and plays the Album
Queue: selected item immediately. Add to End of Queue

Play Next: Inserts the item into the queue after the Rooms Cancel Now Playing Rooms Music Now Playing
current song and plays it when the
Add to End of Queue: current song ends. Music

Adds the item to the end of the queue. .

0 When you select a radio station the following items are displayed.

Play Now: Plays the selected item immediately.

Add to HEOS Favorites: Adds to HEOS Favorites.

Front panel Rear panel Remote control 48 Index
unit

Contents Connections Playback Settings Tips Appendix

Listening to the same music in multiple 1 Rooms 2 Rooms
rooms
Drag one room into another to group them Drag one room into another to group them
The HEOS system is a true multi-room audio system that automatically Dining
synchronizes audio playback between multiple HEOS devices so that the Dining Song Name 1
audio coming from different rooms is perfectly in sync and always sounds Song Name 1
amazing! You can easily add up to 32 HEOS devices to your HEOS Living+Kitchen
system. You can join or group up to 16 individual HEOS devices into a Living Song Name 2
group of HEOS devices that function as if they were a single HEOS Kitchen
device. Song Name 2 Living

o Grouping rooms Kitchen 3
Drag a room out of this group to ungroup it
1 Press and hold your finger on room that is not playing Bedroom
music. Song Name 3 Bedroom
Song Name 3
2 Drag it into the room that is playing music and lift your
finger. Rooms Music Now Playing Rooms Music Now Playing

3 The two rooms will be grouped together into a single .
device group and both rooms will be playing the same
music in perfect sync.

Front panel Rear panel Remote control 49 Index
unit

Contents Connections Playback Settings Tips Appendix

o Ungrouping rooms Rooms Rooms

1 Press and hold your finger on room that you want to Drag one room into another to group them Drag one room into another to group them
remove from the group. Dining
Dining Song Name 1
2 Drag it out of the group and lift your finger. Song Name 1
Living
Living Song Name 2
Song Name 2
Kitchen
NOTE Living 2 Song Name 4
0 You can not remove the first room that started playing the music before grouping.
Kitchen Bedroom
1 Bedroom Song Name 3
Song Name 3

Rooms Music Now Playing Rooms Music Now Playing

.

Front panel Rear panel Remote control 50 Index
unit