The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by webteam, 2020-04-17 08:27:04

BD 712108

BD 712108

TG 500

WIRELESS MICROPHONE SYSTEM
MANUAL

TG 500 – Contents 2

1. Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
1.1 TG 500 receiver system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
1.2 TG 500 handheld and beltpack transmitter system . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
1.3 NiMH rechargeable batteries, alkaline batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
1.4 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4

2. TG 500SR and TG 500DR diversity receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
2.1 Positioning the receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
2.2 Operation and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
2.3 Connecting antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
2.4 Connecting and setting up remote antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9
2.5 Connecting the receiver to a microphone input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9
2.6 Connecting/disconnecting the receiver to/from the mains . . . . . . . . . . . . . . . . . . . . . . Page 10
2.7 Initial operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
2.7.1 Switching the receiver on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
2.8 Menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11

3. TG 500H handheld transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19
3.1 Operation and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19
3.2 Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19
3.3 Initial operation of the handheld transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 20
3.4 Using the sensitivity switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 21
3.5 Care instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22

4. TG 500B beltpack transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23
4.1 Operation and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23
4.2 Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 24
4.3 Initial operation of the beltpack transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 24
4.4 Using the sensitivity switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 25
4.5 Fastening the belt clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 25

5. Synchronisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26

6. Instructions for all transmitters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26

7. Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 27

8. Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 27

9. Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28

10. Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 29

11. Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 30

12. Authorisation and registration obligation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 30

13. Simplified EU declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 30

TG 500 – Safety information 3

Thank you for putting your trust in us and choosing to buy the Fire safety
beyerdynamic TG 500 wireless system. Before using it for the first • Never place open fire sources (e.g. candles) on the device.
time, please take a moment to carefully read this user manual.
Moisture / heat sources
The system is extremely flexible and is suitable for professional • Never expose the device to rain or high humidity. Do not install
audio applications on a stage, on tour or for installations.
It has an operating range of up to 120m with the supplied anten- it in the immediate vicinity of swimming pools, shower facilities,
nas, and its large dynamic range allows for an excellent signal-to- damp basements or other areas with unusually high air
noise ratio. humidity.
The system is supplemented by ergonomic handheld and beltpack • Never place objects filled with water (e.g. vases or drinking
transmitters. Sophisticated battery compartment solutions allow glasses) on the device. Liquids in the devices may cause a short
for rapid battery replacement. circuit.
• Never install or operate the device in the immediate vicinity of
1. Safety information radiators, lighting systems or other heat-generating devices.

General TG 500SR connection
• Please READ this user manual. • Lay all connector cables so that people cannot trip over them
• Please KEEP this user manual.
• Please FOLLOW the specified operating and safety instructions. and injure themselves.
• Always remove the power adaptor from the power supply when
Disclaimer
• Beyerdynamic GmbH & Co. KG will not be liable for any damage undertaking any work on the inputs and outputs.
• The input voltage is 100–240V AC; the power consumption of
to the product or injury to persons caused by negligent,
improper, incorrect or inappropriate operation of the product. the device is approx. 3W.
• If the device has caused a defective fuse or a short circuit,
1.1 TG 500 receiver system
disconnect it from the mains and have it checked and repaired.
The lightning symbol in an isosceles triangle • Always unplug the power adaptor from the mains and/or the
alerts the user to an uninsulated and potentially
hazardous contact voltage within the device that may device by pulling at the plug – never by pulling the cable.
be strong enough to give users an electric shock. • Do not use the device if the power adaptor is damaged.
• Connection of defective or unsuitable accessories could cause
An exclamation mark in an isosceles triangle alerts
the user to important instructions for operating and damage to the device. Therefore, only use power adaptors that
maintaining the product in the accompanying are available from or recommended by beyerdynamic.
documentation. • To disconnect the device from the mains, pull the power adaptor
out of the power socket.
1. Please read these instructions.
2. Please keep these instructions. TG 500DR connection
3. Please observe all warnings. • The device must be connected to a power socket with a
4. Follow all instructions.
5. Do not use this device near water. protective contact.
6. Only clean the device with a dry cloth. • Always lay the cable so that it cannot kink or be cut through by
7. Do not mount the device near sources of heat such as
sharp objects.
radiators, heat accumulators, ovens or other appliances • Lay all connector cables so that people cannot trip over them
(including power amplifiers) that give off heat.
8. Do not make any changes to this device’s power plug. and injure themselves.
9. Protect the connector cable from pinching or kinking, • Always turn off the power supply when undertaking any work on
especially at the appliance itself and at the power plug.
10. Only use accessories for this device that are specified by the the inputs and outputs.
manufacturer. • The input voltage is 100–240V AC; the power consumption of
11. Disconnect the device from the mains during thunderstorms or
if you do not intend to use it for long periods of time. the device is approx. 11W.
12. All maintenance work must be carried out by service personnel • Check whether the connection ratings correspond to the existing
that are qualified to do so. Maintenance is required if the
device itself or its power cable has been damaged, if liquids mains supply. Connecting the system to an incorrect power
or objects have fallen into the device, if the device has been supply may cause serious damage. Incorrect voltage may
exposed to rain or heavy moisture, if the device is not damage the device or cause an electric shock.
operating properly, or if it has been dropped • Please note that different mains voltages require corresponding
power cables and connector plugs.
Location
• The device must be set up in such a way that the power adaptor Please refer to the table below:

and all connections on the rear of the device are easily Voltage Standard power plug
accessible.
• When transporting the device to a different location, make sure 110 to 125V UL817 and CSA C 22.2 No. 42.
it is adequately secured and that nobody can be injured in the
event of falls or impacts. 220 to 230V CEE 7 page VII, SR section 107-2-D1/IEC 83 page C4.

240 V BS 1363 (1984): “Specification for 13A fused plugs
and switched and un-switched socket outlets.”

• If the device has caused a defective fuse or a short circuit,
disconnect it from the mains and have it checked and repaired.

• Do not touch the power cable with wet hands. There must be no
water or dust on the contact pins. In either case, you could
suffer an electric shock.

• The power cable must be securely connected. There is a risk of
fire if it is loose.

• Always unplug the power cable from the mains and/or the device
by pulling at the plug – never by pulling the cable. This could
damage the cable and cause an electric shock or fire.

• Do not use the device if the mains plug is damaged.

TG 500 – Safety information 4

• Connection of defective or unsuitable accessories could cause warranty claims will be void. Even the description “Leak proof”
damage to the device. Therefore, only use connector cables that on batteries is not a guarantee against leaks.
are available from or recommended by beyerdynamic. • Never disassemble the batteries. The contained battery acid will
damage skin and clothing.
• To disconnect the receiver from the mains, switch it off and pull • Misuse or improper use could cause the batteries to leak. In
the power plug out of the power socket. extreme cases, there is a risk of explosion, heat, fire, smoke or
gas.
Troubleshooting/repairs • Never expose the batteries to excessive heat such as sunshine,
• Never open the device yourself. fire or the like.
• Refer all service work to authorised professionals only.
1.4 Disposal
Cleaning
• Only clean the device with a dry or slightly damp cloth. Never • Remove the batteries when disposing of the transmitter.
• Used batteries may contain harmful substances that are harmful
use solvents, as these will damage the surface.
to your health and the environment.
1.2 TG 500 handheld and beltpack transmitter • Always dispose of used batteries in accordance with the
system
applicable disposal regulations. Do not throw batteries into fire
• Protect the transmitter from moisture, falling and impacts. You (risk of explosion) or into residual waste. Please hand in
may injure yourself or others or damage the transmitter. batteries at retail outlets or at communal recycling centres.
Return is free of charge and stipulated by law. Please only
• Always switch the transmitter off before replacing the batteries. dispose of discharged batteries in the containers provided.
• Details of how to remove batteries from the device can be found
Handheld transmitter in the chapter “Inserting the batteries”.
• Do not blow into the microphone. In condenser microphones, • All batteries get recycled. This allows for valuable raw materials
such as iron, zinc or nickel to be regained.
this could damage the converter. Perform a voice test instead.
• At the end of its operating life this product may not
Beltpack transmitter be disposed of along with normal household waste.
• Clip-on microphones can be very small. There is a risk of Please take it to a designated recycling point for
electric and electronic appliances. This is indicated
suffocation if accidentally swallowed. Therefore, keep such by the symbol on the product, the operating
microphones out of the reach of children. instructions or the packaging

Battery care
• Avoid complete draining of the battery. This could damage the

battery and shorten its service life.
• If battery-powered devices are not used for long periods of

time (e.g. 1 year), battery self-discharge may be accelerated.
For long-term storage, the temperature should be between
+10°C and +30°C.
• If you do not use the transmitter for several months, the
transmitter batteries should be removed and charged at least
once a year to prevent leakage or deterioration in performance
due to self-discharge

Charging contacts
• The charging contacts could cause property damage, injuries

or fire damage if they come into contact with conductive
materials such as jewellery, keys or chains. This can lead to a
closed electric circuit and, therefore, to the material
overheating. To avoid this kind of unintentional electric circuit,
the charging contacts must be handled with care. This is
especially important if the transmitter is transported in a bag
or another container along with metallic objects.
• From time to time, clean the battery and charging contacts of
the transmitter with a soft, lint-free cloth moistened with spirit
or alcohol. Always remove the batteries from the battery
compartment beforehand.

1.3 NiMH rechargeable batteries,
alkaline batteries

• The handheld and beltpack transmitters of the TG 500 system
can only be operated with AA (LR6) Mignon alkaline batteries or
structurally identical NiMH rechargeable batteries.

• Standard alkaline batteries may have length tolerances of
2–3mm. It is therefore important to ensure a good contact when
replacing the batteries.

• If you do not use the transmitter for weeks or months, please
remove the batteries. Batteries may leak after long periods of
non-use and may corrode circuit paths and other components.
This means repairs will no longer be possible. In this case, all

TG 500 – Diversity receiver 5

2. TG 500SR and TG 500DR diversity receiver

2.1 Positioning the receiver

• Position the receiver in the room in which the transmission is taking place.
• Position the receiver as close as possible to the transmitter. For optimum reception, there should be a line of sight between the trans-

mitter and the receiver. The minimum distance between the transmitter and receiver is 1m.
• Do not position the receiver directly next to digitally controlled devices.

2.2 Operation and controls

Figure 2-1: TG 500SR single-channel receiver – front

ᕡᕢ ᕣ ᕤᕥ ᕦ ᕧᕨ

Figure 2-2: TG 500DR two-channel receiver – front

ᕡ ᕢᕣ ᕤ ᕥ ᕦ ᕧᕨ ᕢ ᕣ ᕤ ᕥ ᕦ ᕧᕨ

ᕡ On/off button ᕥ Down button
ᕢ Infrared interface for synchronisation of receiver and ᕦ Enter button
ᕧ Exit button
transmitter ᕨ Button for synchronisation of receiver and transmitter
ᕣ Backlit LCD
ᕤ Up button

TG 500 – Diversity receiver 6

Figure 2-3: TG 500SR receiver – back

ᕩµ ¸ ¹ ᕩƸ ƹ

Figure 2-4: TG 500DR receiver – back

ᕩ ¸¹ µ ¸¹ ᕩ Ƹ

ᕩ Antenna input A or B Ƹ TG 500SR: DC connector for power adaptor, 12V DC, 500mATG
µ Information about frequency band
¸ Audio output, 3-pin jack 500DR: Mains connection 100–240V, 50/60Hz, max. 15W
¹ Audio output, 3-pin XLR ƹ Strain relief for the power adaptor cable

Figure 2-5: TG 500SR/DR receiver display





M

ቤብ ቦ ቧቨ

ቢ Overload display ቦ Transmitter battery display
ባ Active diversity channel A or B ቧ Transmitter mute function activated
ቤ HF level display ቨ Transmitter lock function activated
ብ Audio level display ቩ Text display


















































Click to View FlipBook Version
Previous Book
แหล่งเรียนรู้
Next Book
docdownloader.com_i9yiugggvj8