Pioneer AVIC-Z910DAB, AVIC-810DAB, AVIC-Z710DAB, AVIC-Z610BT EN

Apple Music Radio screen AppRadio Mode + English

Switches between playback and pause. You can operate iPhone or smartphone applications with finger gestures such as
Displays the pop-up menu for Apple Music Radio. tapping, dragging, scrolling, or flicking on the screen of this product.
• Touch [Play More Like This] to play back songs similar to the current song.
• Touch [Play Less Like This] to set it not to play back the current song again. Compatible iPhone models
• Touch [Add to iTunes Wish List] to add the current song to the iTunes wish list. • iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus,
NOTE
This function may not be used depending on your Apple Music account status. iPhone 5s, iPhone 5c, iPhone 5
Skips tracks forwards.
Compatible smartphone (Sound from AppRadio Mode + on some Android devices
cannot be heard from the speakers of this unit.) models
For details about Android device compatibility with this product, refer to the
information on our website.

NOTES
• The compatible finger gestures vary depending on the application for an iPhone or a smartphone.
• Copyright protected files such as DRM cannot be played.
• AppRadio Mode + may be referred to as AppRadio Mode.

WARNING

Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you
must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it
while the car is parked. No feature should be used unless it is safe to do so under the driving conditions
you are experiencing.

Using AppRadio Mode +

Important
• To use AppRadio Mode +, install the AppRadio app on the iPhone or smartphone in advance.

For details about the AppRadio app, visit the following site:
http://www.pioneer-car.eu/eur/appradiomode
• Be sure to read Using app-based connected content (page 86).
• Content and functionality of compatible applications are the responsibility of the App providers.
• In AppRadio Mode +, usage is limited while driving, with availability of functions and content
determined by the App providers.
• AppRadio Mode + allows access to applications other than those listed, subject to limitations while
driving.
• PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS
AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE
INFORMATION.

En 51

Starting procedure 2 Press .
3 Touch .
When connecting an iPhone or a smartphone to this product, settings are required 4 Touch [AppRadio Mode].
according to the connected device. For details, refer to Setup for iPod/iPhone or 5 Touch desired icon in the tab.
smartphone (page 38).
TIPS The AppRadio app is launched.
• Touch the desired application icon after the AppRadio app is launched.
• If you connect your device to this product while an AppRadio Mode + compatible application is For smartphone (Android) users

already running, the application operation screen will appear on this product. NOTE
• The desired application is launched, and the application operation screen appears. The video playback capability depends on the connected Android device.
• Press to go back to the top menu screen.
1 Unlock your smartphone and connect it to this product via USB.
AppRadio Mode +
Refer to the Installation Manual.
Displays the current source.
Displays the launcher application screen. 2 Press .
3 Touch .
Displays the previous screen. 4 Touch [AppRadio Mode].
5 Touch desired icon in the tab.
Displays the menu screen.
The AppRadio app is launched.
• Press then touch to hide the AppRadio Mode + SideControlBar.
• Press then touch again to display the AppRadio Mode + SideControlBar again. Using the keyboard (for iPhone users)
• and are not available depending on the type of device.
When you tap the text input area of an application for iPhone, a keyboard will be
For iPhone users displayed on the screen. You can input desired text directly from this product.

1 Connect your iPhone to this product via USB. NOTES
• This function may not be available depending on your iPhone.
Refer to the Installation Manual. • This function is only available in AppRadio Mode + on the iPhone.

52 En CAUTION

For your safety, the keyboard functionality is only available when the vehicle is stopped and the
handbrake is engaged.

1 Start up the AppRadio Mode +.
2 Touch the text input area on the application operation screen.

A keyboard for entering text appears.

TIP
You can select the keyboard language (page 64).

Using the audio mix function Apple CarPlay

You can output the audio mixing AV source and an application for iPhone or You can operate iPhone applications with finger gestures such as tapping, dragging, English
smartphone when AppRadio Mode + is used. scrolling, or flicking on the screen of this product.

NOTES Compatible iPhone models
• Depending on the application or AV source, this function may not be available. For details about compatibility of iPhone models, refer to the following website.
• When the audio mix function is set to on, the voice guidance of the navigation system is not output. http://www.apple.com/ios/carplay

To output the voice guidance of the navigation system, set the audio mix function to off. NOTE
The compatible finger gestures vary depending on the application for the iPhone.
1 Start up the AppRadio Mode +.
2 Press VOL (+/-). WARNING

The audio mix menu will be displayed on the screen. Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of
and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is
NOTES parked. No feature should be used unless it is safe to do so under the driving conditions you are
• The audio mix menu is displayed for four seconds. If the screen disappears, press VOL (+/-) again. The experiencing.

screen reappears.
• The AV operation screen and the Application screen can be switched by pressing .

Touch to mute. Touch again to cancel mute. Using Apple CarPlay

Sets whether to switch the sound mix function on or off. Important
• Left tab: Apple CarPlay may not be available in your country or region.
For details about Apple CarPlay, visit the following site:
The audio mix function is enabled (mix on) and the App volume is displayed. http://www.apple.com/ios/carplay
• Right tab: • The content and functionality of the supported applications are the responsibility of the App

The audio mix function is disabled (mix off). This is not displayed on the AV providers.
operation screen. • In Apple CarPlay, usage is limited while driving, with availability of functions and content determined

Adjusts the application audio volume. by the App providers.
• The App volume is not displayed when the right tab is selected. • Apple CarPlay allows access to applications other than those listed that are subject to limitations
• You cannot adjust the volume of the main sound on the screen. Press VOL (+/-)
while driving.
to adjust the volume of the main sound. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS

AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE
INFORMATION.

Setting the driving position

To achieve optimum usability of Apple CarPlay, set the driving position setting correctly

according to the vehicle. The setting will be applied the next time an Apple CarPlay

compatible device is connected to this product.

1 Press .

TIP 2 Touch then .
The AV operation screen and the Application screen can be switched by pressing
. The system setting screen appears.

En 53

3 Touch [Smartphone-related Settings]. The unit configures the connection then start the application.
4 Touch [Driving Position].
TIP
[Left]
Select for a left-hand drive vehicle. You can also start Apple CarPlay with a desired device by opening the Bluetooth or Apple CarPlay
[Right] setting menu while displaying the device search or device list screen.
Select for a right-hand drive vehicle.
TIP once Apple CarPlay is activated.
Starting procedure You can use Siri function by pressing

When connecting an iPhone to this product, settings are required according to the NOTES
connected device. For details, refer to Setup for iPod/iPhone or smartphone (page 38).
• For details on USB connection, refer to the Installation Manual.
Wired connection • If an Apple CarPlay compatible device has been connected and another screen is displayed, touch

1 Connect an Apple CarPlay compatible device to this product via USB. [Apple CarPlay] on the top menu screen to display the Application menu screen.
2 Press . • The Bluetooth connection with the Apple CarPlay compatible device will be terminated automatically
3 Touch .
4 Touch [Apple CarPlay]. if Apple CarPlay is turned on. While Apple CarPlay is turned on, only a Bluetooth audio connection will
5 Touch the Apple CarPlay icon in the tab. be possible for devices other than the device connected via Apple CarPlay.
• Hands-free phoning via Bluetooth wireless technology is not available while Apple CarPlay is on. If
The application screen appears. Apple CarPlay is turned on during a call on a mobile phone other than an Apple CarPlay compatible
device, the Bluetooth connection will be terminated after the call ends.
Wireless connection • The route guidance using the internal navigation system will stop automatically if the route guidance
function in Apple CarPlay is launched.
Before using Apple CarPlay wirelessly, connect the device to this product via Bluetooth
and turn on Apple CarPlay in the Bluetooth setting menu of the device (page 31). Adjusting the volume

1 Turn on the Wi-Fi function on the device. You can adjust the guidance volume separately from the main sound volume when
2 Press . Apple CarPlay is used.
3 Touch .
1 While Apple CarPlay is activated, press VOL (+/-).
The device search screen appears.
Touch then skip to step 4 since the device list screen appears if Apple CarPlay had The volume menu will be displayed on the screen.
previously been used wirelessly with the device.
Touch to mute. Touch again to cancel mute.
NOTE
The unit cannot detect the device unless the Bluetooth or Apple CarPlay setting menu is displayed Touch [+]/[-] to adjust the guidance volume.
on the iPhone screen.
Displays the main sound volume. To adjust the main sound volume, press
4 Touch . VOL (+/-) on the unit.
5 Touch a desired device on the screen. NOTE
The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The
54 En menu reappears.

Android Auto™ 3 Touch [Smartphone-related Settings]. English
4 Touch [Driving Position].
Z910DAB Z810DAB
You can operate Android applications with finger gestures such as tapping, dragging, [Left]
scrolling, or flicking on the screen of this product. Select for a left-hand drive vehicle.
[Right]
Compatible Android devices Select for a right-hand drive vehicle.
For details about compatibility of Android models, refer to the following website.
https://support.google.com/androidauto Starting procedure

NOTE When connecting a smartphone to this product, settings are required according to the
The compatible finger gestures vary depending on the application for the smartphone. connected device. For details, refer to Setup for iPod/iPhone or smartphone (page 38).

WARNING Wired connection

Certain uses of the smartphone may not be legal while driving in your jurisdiction, so you must be 1 Connect an Android Auto™ compatible device to this product via USB.
aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the 2 Press .
car is parked. No feature should be used unless it is safe to do so under the driving conditions you are 3 Touch .
experiencing. 4 Touch [Android Auto].
5 Touch the Android Auto icon in the tab.
Using Android Auto
A Bluetooth connection with the Android Auto compatible device is automatically
Important established and a Bluetooth connection with any other devices are terminated.
Android Auto may not be available in your country or region.
For details about Android Auto, please refer to the Google support site: Wireless connection
http://support.google.com/androidauto
• The content and functionality of the supported applications are the responsibility of the App Before using Android Auto wirelessly, connect the device to this product via Bluetooth
(page 31).
providers.
• In Android Auto, usage is limited while driving, with availability of functions and content determined 1 Turn on the Wi-Fi function on the device.
2 Press .
by the App providers. 3 Touch .
• Android Auto allows access to applications other than those listed that are subject to limitations
The device search screen appears.
while driving. Touch then skip to step 4 since the device list screen appears if Android Auto had
• PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS previously been used wirelessly with the device.

AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE NOTE
INFORMATION. The unit cannot detect the device unless the Bluetooth setting menu is displayed on the
smartphone screen.
Setting the driving position
4 Touch .
To achieve optimum usability of Android Auto, set the driving position setting correctly
according to the vehicle. The setting will be applied the next time an Android Auto En 55
compatible device is connected to this product.

1 Press .
2 Touch then .

The system setting screen appears.

5 Touch a desired device on the screen. NOTE

The unit configures the connection then start the application. Android Auto will launch automatically only when an Android Auto compatible device is correctly
connected to this product.
TIP once Android Auto is activated.
You can use voice recognition function by pressing 1 Press .

NOTES 2 Touch then .

• For details on USB connection, refer to the Installation Manual. 3 Touch [Smartphone-related Settings].
• If twenty devices are already paired, the message confirming whether to delete the registered device
4 Touch [Android Auto Auto-launch] to switch [On] or [Off].
is displayed. If you want to delete the device, touch [Agree]. If you want to delete other device, touch
[BT Settings] and delete the devices manually (page 32).
• If Android Auto is turned on during a call on a mobile phone other than the Android Auto compatible
device, the Bluetooth connection will switch to the Android Auto compatible device after the call.

Adjusting the volume

You can adjust the guidance volume separately from the main sound volume when
Android Auto is used.

1 While Android Auto is activated, press VOL (+/-).

The volume menu will be displayed on the screen.

Touch to mute. Touch again to cancel mute.

Touch [+]/[-] to adjust the guidance volume.

Displays the main sound volume. To adjust the main sound volume, press
VOL (+/-) on the unit.
NOTE
The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The
menu reappears.

Setting the auto-launch function

If this function is set to on, Android Auto will launch automatically when an Android
Auto compatible device is connected to this product.

56 En

HDMI AUX

Z910DAB You can display the video image output by the device connected to video input. English

CAUTION CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video
images, stop in a safe place and apply the handbrake. images, stop in a safe place and apply the handbrake.

NOTE NOTES
A High Speed HDMI® Cable (sold separately) is required for connection. For details, refer to the • A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection. For details, refer to the
Installation Manual.
Installation Manual.
• You can set the screen size for the video image (page 73).

Starting procedure Starting procedure

1 Press then touch . 1 Press .

2 Touch [HDMI]. 2 Touch then .

The HDMI source screen appears.

3 Touch [Input/Output Settings].

Basic operation 4 Confirm that [AUX Input] is turned on.

HDMI source screen 5 Press then touch .

6 Touch [AUX].

The AUX screen appears.

Hides the touch panel keys.
To display the keys again, touch anywhere on the screen.

TIP
You can set the screen size for the video image (page 73).

En 57

Basic operation AV input

AUX screen You can display the video image output by the device connected or the camera to video
input. For details, refer to the Installation Manual.
Hides the touch panel keys.
To display the keys again, touch anywhere on the screen. CAUTION
TIP
You can set the screen size for the video image (page 73). For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video
Switches between the video input and audio input. images, stop in a safe place and apply the handbrake.

Starting procedure

1 Press .

2 Touch then .

3 Touch [Input/Output Settings].

4 Touch [AV Input].

5 Touch [Source] for AV source or [Camera] for camera.

6 Press then touch .

7 Touch [AV] for AV source or [Camera View] for camera.

The image is displayed on the screen.

NOTE
If [Source] is selected, [2nd Camera Input] is automatically set to [Off] (page 62).

58 En

Basic operation Wireless Mirroring

AV source screen (This function is available only for Android device.) English
Wireless Mirroring is a wireless display designed to mirror your mobile device on this
Hides the touch panel keys. product screen via Wi-Fi connection.
To display the keys again, touch anywhere on the screen.
Starting procedure

Wireless Mirroring operations and procedures vary depending on the connected mobile
device. Refer to the instruction manual that came with your mobile device.

CAUTION

For safety reasons, this function is available only when you stop your vehicle in a safe place and apply
the handbrake.

1 Press .

2 Touch then .

3 Touch [Wi-Fi Settings].

4 Confirm that [Wi-Fi] is turned on.

5 Press then touch .

6 Touch [Mirroring].

A connection is configured then the instruction message appears on the display.

NOTES

• When Apple CarPlay or Android Auto with wireless connection is activated, the connection
swtiching confirmation screen appears (Android Auto function is only available for AVIC-
Z910DAB/AVIC-Z810DAB). Touch [Yes] to proceed to Wireless Mirroring.

• When the Wi-Fi connection is set to [OFF], the connection confirmation screen appears. Touch
[Start] to make the connection.

7 Make a Wireless Mirroring connection on the mobile device.
8 Touch [Yes].

The Wireless Mirroring screen appears.

En 59

Basic operation Vehicle equipment
information
Wireless Mirroring screen (Example)
Z910DAB Z810DAB Z710DAB Z7110DAB
Displays Full screen.
Using the Vehicle Bus adapter
[Disconnect] Disconnects Wireless Mirroring.
By connecting the optional Vehicle Bus adapter, you can display the operation status of
NOTES the vehicle’s parking sensor function and climate control panel on the screen.

• The screen shown in the example may differ from the connected mobile device. Important
• If the Android device is not ready for Miracast UIBC, you cannot perform touch operation. • For information on installing the Vehicle Bus adapter, see the operating manual of the Vehicle Bus

adapter.
• After installing the Vehicle Bus adapter, be sure to check operations.
• For details about vehicle models that are compatible with Vehicle Bus adapters, refer to the

information on our website.
• Functions and displays vary depending on the vehicle model. For details of the functions available

according to the model, refer to the information on our website.

Parking Assist screen

Switches the display to the rear view camera image.
The display switches only when the rear view camera setting is set to [On] and the
gearstick is in the REVERSE (R) position.

60 En

A/C Control screen Settings

Displaying obstacle detection information You can adjust various settings in the main menu.

CAUTION Displaying the setting screen English

This function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles 1 Press .
and is not a substitute for your attentiveness, judgement, and care while parking your vehicle. 2 Touch .
NOTES 3 Touch one of the following categories, then select the options.
• This function is only available for vehicles equipped with a parking sensor system.
• The Parking Assist screen is not displayed until this product boots up completely. System settings (page 61)
Theme settings (page 66)
1 Turn on the parking assist sensor on your vehicle. Audio settings (page 68)
Video settings (page 71)
The Parking Assist screen appears. Bluetooth settings (page 31)

Displaying the operating status of the climate System settings
control panel
The menu items vary according to the source.
When you operate the climate control panel of the vehicle, the screen switches
automatically to the A/C Control screen. [Navigation Related Settings]
NOTES
• The settings of the climate control panel operated before this product is started are not displayed on Menu Item Description

the screen. [Navigation info window] You can set whether to display the guidance information of
• Any climate control panel settings of the vehicle that are turned off are not displayed on the screen. [On] [Off] the navigation on the AV operation screen.
• If the information displayed on the screen is reversed for the left and right sides of the vehicle, change
[AV/App Guide Mode] You can set whether to automatically switch to the
the [Climate Reverse] setting to [On] (page 63). [On] [Off] navigation screen from the AV screen or the application
screen when your vehicle approaches a guidance point
such as an junction.

[AV Source Settings] Description
(page 42)
Menu Item (page 40)
[Radio Settings] Setting Bluetooth audio source activation.
[DAB Settings]*
[Bluetooth Audio]

[On] [Off]

En 61

* AVIC-Z910DAB/AVIC-Z810DAB/AVIC-Z710DAB/AVIC-Z7110DAB ▶Camera for Camera View mode

[Smartphone-related Settings] Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
Menu Item Description To display the camera image, touch [Camera View] on the AV source selection screen
[Smartphone Setup] (page 37).
[Driving Position] Setting the connected mobile device (page 38).
NOTES
[Right] [Left] Setting the driving position. • To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On]
• Apple CarPlay (page 53)
[Android Auto Auto- • Android Auto™ (page 55) (page 62).
launch]* • When using the 2nd camera, set [AV Input] to [Camera] (page 58).
Select [On] to automatically launch Android Auto when an • When the camera view of both the rear view camera and 2nd camera are available, the key to switch
[On] [Off] Android device is connected to the unit.
the display appears. Touch this key to switch the display between the rear view image and 2nd
camera image.

* AVIC-Z910DAB/AVIC-Z810DAB CAUTION

[Input/Output Settings] Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
Menu Item Description • Immediately verify whether the display changes to the rear view camera image when the gearstick is
[AppRadio Mode Sound] Set where the sound for AppRadio Mode + is output when
it is used with a smartphone. moved to REVERSE (R) from another position.
[AVN] The sound is output from the speakers of this unit. • When the screen changes to full-screen rear view camera image during normal driving, switch to the
[Smartphone] The sound is output from the speakers of the smartphone.
opposite setting in [Reverse Gear Setting.].
[AV Input] NOTE • If you touch while the camera image is displayed, the displayed image turns off temporarily.
[Source] [Camera] [Off] With an iPhone, the sound is always output from the speakers of • When the camera view of both the rear view camera and 2nd camera are available, the key to switch
this unit.
[AUX Input] Select AV input source (page 58). the display appears. Touch this key to switch the display between the rear view image and 2nd
[On] [Off] camera image.
Set to [On] for AUX source (page 57).
Menu Item Description

[Camera View] Set to [On] to display camera view at all times. (The same
[On] [Off] mode is turned on when is touched on the camera
view screen. The setting value is synchronised.)

NOTES

• To set the rear view camera as the camera for Camera View
mode, set [Back Camera Input] to [On] (page 62).

• When using the second camera, set [AV Input] to [Camera] or
[2nd Camera Input] to [On] (both settings are synchronised)
(page 62).

[Camera settings] [Back Camera Input] TIP
[Off] [On] You can also turn this function on by touching [Camera View] on
A separately sold rear view camera (e.g. ND-BC8) is required for utilising the rear view the AV source selection screen or in the source list.
camera function. (For details, consult your dealer.) [2nd Camera Input]
[Off] [On] Setting the second camera activation (front camera, etc.).
▶Rear view camera Setting rear view camera activation.
[Reverse Gear Setting.]
This product features a function that automatically switches to the full-screen image of Setting the second camera activation (front camera, etc.).
the rear view camera installed on your vehicle when the gearstick is in the REVERSE (R) [Battery] This function is synchronised with [AV Input] setting.
position.
Camera View mode also allows you to check what is behind you while driving. Setting the polarity of the rear view camera.

The polarity of the connected lead is positive.

62 En

Menu Item Description [Wi-Fi Settings] Description
[Ground] (page 36)
The polarity of the connected lead is negative. Menu Item
[Parking Assist Guide] [Wi-Fi Settings]
[On] [Off] NOTE
If the camera polarity setting is wrong, or wrong camera setting is [Safe Mode] Description English
[Parking Assist Guide made, press and hold to release the rear view camera screen
Adjust]* and then change the camera polarity setting to [Battery]. Menu Item Set the safe mode that regulate operating some functions
[Safe Mode] only when you stop your vehicle in a safe place and apply
You can set whether to display the parking assist the handbrake.
guidelines on the rear view camera images when backing [On] [Off]
up your vehicle.
[Demo Mode] Description
Adjusting the guidelines by dragging or touching / / Setting the demo mode.
/ / / on the screen. Menu Item
[Demo Mode]
Touch [Default] to reset the settings.
[On] [Off]
CAUTION
[System Language] Description
• When adjusting the guidelines, be sure to park the vehicle in a
safe place and apply the handbrake. Menu Item Select the system language.
[System Language]
• Before getting out of the car to place the markings, be sure to NOTES
turn the ignition switch off (ACC OFF). • If the embedded language and the selected language setting are

• The range projected by the rear view camera is limited. Also, the not the same, the text information may not display properly.
vehicle width and distance guidelines displayed on the rear view • Some characters may not be displayed properly.
camera image may differ from the actual vehicle width and
distance. (The guidelines are straight lines.)

• The image quality may deteriorate depending on the usage
environment, such as at night or in dark surroundings.

NOTE
Using packing tape or similar tape place markings as shown below
before setting up the guidelines so that the guidelines can be
overlaid to the markings.

2m

50 cm [Climate Reverse]

25 cm Z910DAB Z810DAB Z710DAB Z7110DAB

Markings Menu Item Description

Markings [Climate Reverse] When the optional vehicle bus adapter is connected, the
[On] [Off] left/right display of the climate control status screen can be
reversed if the display does not match that of the vehicle.

25 cm

Rear bumper [Restore Settings]
* This setting is available only when you stop your vehicle in a safe place and apply the handbrake. Touch [Restore] to restore the settings to the default settings.

En 63

CAUTION Menu Item Description
[Touch Panel Calibration]
Do not turn off the engine while restoring the settings. 1 Touch two corners of the screen along the arrows then
touch the centres of the two [+] marks at the same
NOTE time twice.
This setting is available only when you stop your vehicle in a safe place and apply the handbrake.
2 Press .
Menu Item Description
[All Settings] The adjustment results are saved.
Almost all settings or recorded content returns to the 3 Press once again.
[Audio Settings] default.
Proceed to 16-point adjustment.
Restore to default Audio settings. 4 Gently touch the centre of the [+] mark displayed on

[Theme Settings] NOTE the screen.
[Bluetooth Settings] This setting is available when the source is turned off.
Restore to default Theme settings. The target indicates the order.
Restore to default Bluetooth settings. • When you press , the previous adjustment
position returns.
[Keyboard] • When you press and hold , the adjustment is
cancelled.
Menu Item
[Keyboard] 5 Press and hold .

The adjustment results are saved.

Description [Dimmer Settings]

You can use the keyboard in AppRadio Mode + by setting NOTE
the language of the keyboard for iPhone. This setting is available only when you stop your vehicle in a safe place and apply the handbrake.

NOTES Menu Item Description
• Set the same system language setting as the iPhone to operate [Dimmer Trigger]
Setting the dimmer brightness.
this function properly. [Auto]
• This function is only available in AppRadio Mode + on the Switches the dimmer to on or off automatically according
[Manual] to your vehicle’s headlight turning on or off.
iPhone. [Time]
[Day/Night] Switches the dimmer to on or off manually.
[Beep Tone] Description
[Day] Switches the dimmer to on or off at the time you adjusted.
Menu Item Select [Off] to disable the beep sound when the button is [Night]
[Beep Tone] pressed or the screen is touched. Setting the dimmer duration by day or night.
You can use this function when [Dimmer Trigger] is set to
[On] [Off] [Manual].

[Touch Panel Calibration] Turns the dimmer function to off.

Z810DAB Z710DAB Z610BT Z7110DAB Z6110BT Turns the dimmer function to on.
If you feel that the touch panel keys on the screen deviate from the actual positions that
respond to your touch, adjust the response positions of the touch panel screen.

NOTES
• Do not use sharp pointed tools such as ballpoint or mechanical pens. They may damage the screen.
• Do not turn off the engine while saving the adjusted position data.
• This setting is available only when you stop your vehicle in a safe place and apply the handbrake.

64 En

Menu Item Description * With some pictures, you cannot adjust [Hue] and [Colour].
[Dimmer Duration]
Adjust the time that the dimmer is turned on or off by NOTES
dragging the cursors or touching or . English
You can use this function when [Dimmer Trigger] is set to • When you touch [Rear View] or [2nd Camera], the mode changes to the selected camera mode. By
[Time]. touching [Source], [NAV], or [Apps], you can return to the selected mode.

TIPS • The adjustments of [Brightness], [Contrast], and [Dimmer Level] are stored separately when your
vehicle's headlights are off (daytime) and on (nighttime).
• Each touch of or moves the cursor backwards or
forwards in the 15 minute width. • [Brightness] and [Contrast] are switched automatically depending on the setting of [Dimmer
Settings].
• When the cursors are placed on the same point, the dimmer
available time is 0 hours. • [Dimmer Level] can be changed the setting or the time to switch it to on or off (page 64).
• The picture adjustment may not be available with some rear view cameras.
• When the cursor for off time setting is placed on the left end and • The setting contents can be memorised separately.
the cursor for on time setting is placed on the right end, the
dimmer available time is 0 hours. [System Information]

• When the cursor for on time setting is placed on the left end and Menu Item Description
the cursor for off time setting is placed on the right end, the [Firmware Information] Displays the firmware version.
dimmer available time is 24 hours.
TIP
NOTE You can also check the open source licence of the functions that
The time display of the dimmer duration adjusting bar depends on this product is equipped with by touching [Licence] in this menu.
the clock display setting (page 73).

[Picture Adjustment]

You can adjust the picture for each source and rear view camera.

CAUTION

For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable
these functions, you must stop in a safe place and apply the handbrake.

To adjust following menu, touch , , , to adjust.

Menu Item Description
Adjust the black intensity.
[Brightness]
[-24] to [+24] Adjust the contrast.

[Contrast] Adjust the colour saturation.
[-24] to [+24]
Adjust the tone of colour (which colour is emphasised, red,
[Colour]* or green).
[-24] to [+24] Adjust the brightness of the display.

[Hue]* Adjust the colour temperature, resulting in a better white
[-24] to [+24] balance.

[Dimmer Level]
[+1] to [+48]

[Temperature]
[-3] to [+3]

En 65

Menu Item Description Menu Item Description
[Firmware Update] [Connection Status]
CAUTION Check that the leads are properly connected between this
[3D Calibration Status] [GPS Antenna] product and vehicle.
• The external storage device for updating must contain only the
correct update file. Displays the connection status of the GPS aerial ([OK] or
[NOK]) and the reception sensitivity.
• Never turn this product off, eject the SD memory card or
disconnect the USB storage device while the firmware is being [Positioning Status] NOTE
updated. If reception is poor, change the installation position of the GPS
[Installation] aerial.
• You can only update the firmware when the vehicle is stopped
and the handbrake is engaged. [Speed Pulse] Displays the positioning status (3D positioning, 2D
[Illumination] positioning, or no positioning), the number of satellites
• You cannot update the old firmware version once the latest [Back Signal] used for positioning (orange), and the number of satellites
firmware is updated. [Vehicle Bus]* that have received signals (yellow). If signals from more
than three satellites are received, the current location can
1 Download the firmware update files into your be measured (page 78).
computer.
Indicates whether the installation position of this product
2 Connect a blank (formatted) storage device to your is correct or not. If installed correctly, [OK] appears. When
computer then locate the correct update file and copy this product is installed at an extreme angle exceeding the
it onto the USB storage device. limitation of the installing angle, [NOK(Inst. Angle)] is
displayed. If the installation of this product is continually
3 Set the external storage device to this product changed and it is not firmly fixed into place,
(page 46). [NOK(Vibration)] is displayed.

4 Turn the source off (page 37). The speed pulse value detected by this product is shown.
5 Display the [System] setting screen (page 61).
6 Touch [System Information]. Displays the status of headlights or small lamps of the
7 Touch [Firmware Update]. vehicle.
8 Touch [Continue].
When the gearstick is gearchanged to “R” (reverse
Follow the on-screen instructions to finish updating the position), the signal switches to [High] or [Low]. The signal
firmware. displayed varies depending on the vehicle.

NOTE Displays the status of the optional Vehicle Bus adapter.

If an error message appears on the screen, touch the display and * AVIC-Z910DAB/AVIC-Z810DAB/AVIC-Z710DAB/AVIC-Z7110DAB
perform the above steps again.
Theme settings
Check the sensor learning status, such as the degree of
learning. You can also check the current sensor values and CAUTION
the total number of speed pulses.
To delete the learned results stored in the sensor, follow Do not turn off the engine while importing an image from the external storage device.
the below instructions.
1 Touch [Distance] or [Speed Pulse], and then touch The menu items vary according to the source.

[Yes].
2 Touch [Learning] and then touch [Reset All].

TIP

Touch [Reset All] to reset the sensor after changing the
installation position or angle.

NOTE

If you touch [Reset Distance], all learned results stored in
[Distance] are cleared.

66 En

Menu Item Description Menu Item Description English
[Background] [Splash Screen]
Select the wall paper from the preset items in this product Select the splash screen from the preinstalled image in this
[Home] [AV] or original pictures via the external device such as USB Preset Images product or external devices such as USB storage devices
storage device and SD memory card. (custom)* and SD memory cards.
Preset Display
(custom)* TIP Selects the desired preset splash screen image.
The wall paper can be set from selections for the top menu screen
(off ) and AV operation screen. Displays the splash screen image imported from the
[Illumination] external storage device.
Selects the desired preset background display. To set the image from an external device, touch then
Coloured Keys select the desired image by touching the desired external
(custom) Displays the background display image imported from the storage device after connecting the device.
external storage device.
(rainbow) To set the image from an external device, touch then * The external storage device is inserted or plugged in in advance to customise the image (page 45).
[Theme] select the desired image by touching the desired external
storage device after connecting the device. Replicating the settings
[Clock]
Preset Images NOTE You can export settings you have made on the [Theme] screen to an external storage
(off ) Background display image must be used within the following device. Also, you can import them from an external storage device.
formats.
• JPEG image files (.jpg or .jpeg) CAUTION
• Allowable data size is 10 MB or smaller
• Allowable image size is 4 000 pixels × 4 000 pixels or smaller Do not turn off the engine while exporting or importing the settings.

Hides the background display. NOTES
• If multiple external storage devices that include available data are connected to this product, the
Select an illumination colour from the colour list or create a
defined colour. order of priority for the targets that the Theme settings are exported to or imported from is as follows:

Select the desired preset colour. Z910DAB Z810DAB
SD memory card
Displays the screen to customise the illumination colour. USB storage device (USB port 1)
To customise the defined colour, touch then touch USB storage device (USB port 2)
or to adjust the brightness and the level of red, green
and blue to create favourite colour. Z710DAB Z610BT Z7110DAB Z6110BT
To store the customised colour in the memory, touch and USB storage device (USB port 1)
hold [Memo], and the customised colour will be available USB storage device (USB port 2)
at the next illumination setting by touching .
• This setting is available only when you stop your vehicle in a safe place and apply the handbrake.
TIP
You can also adjust the colour tone by dragging the colour bar. ▶Exporting Theme settings

Shifts gradually between the preset colours in sequence. 1 Set the external storage device (page 45).

Select the theme colour. 2 Press .

TIP 3 Touch then .
You can preview the top menu screen or the AV operation screen
by touching [Home] or [AV] respectively. 4 Touch [Export].

Select the style of the clock from the preset image. 5 Touch the item you want export.

Select the desired preset style for the clock. [Illumination]
[Theme]
Hides the clock display.

En 67

[Splash Screen] Menu Item Description
[Select All] [ATT] The volume becomes 20 dB lower than the current volume.
[Mute] The volume becomes 0.
6 Touch [Export]. [Off] The volume does not change.
Adjust the volume level of each source to prevent radical
▶Importing Theme settings [Source Level Adjuster] changes in volume when switching between sources other
[-4] to [+4] than FM.
1 Set the external storage device (page 45). Touch or to adjust the source volume after
[Subwoofer] comparing the FM tuner volume level with the level of the
A message confirming whether to import the stored setting data appears. [On] [Off] source.
TIP
2 Touch [Import]. [Speaker Level] If you directly touch the area where the cursor can be moved, the
Listening position*1*2 SLA (source level adjustment) setting will be changed to the value
Audio settings [Off] [Front Left] [Front of the touched point.
Right] [Front] [All] NOTES
The menu items vary according to the source. Some of the menu items become Standard Mode*3 • Settings are based on the FM tuner volume level, which remains
unavailable when the volume is set to mute or the source is off. [Front Left] [Front Right]
[Rear Left] [Rear Right] unchanged.
Menu Item Description [Subwoofer] • This function is not available when the FM tuner is selected as
Network Mode*3
[Graphic EQ] Select or customise the equaliser curve. [High Left] [High Right] the AV source.
[Super Bass] [Powerful] Select a curve that you want to use as the basis of [Mid Left] [Mid Right] Select enable or disable rear subwoofer output from this
[Natural] [Vocal] [Flat] customising then touch the frequency that you want to [Subwoofer] product.
[Custom1] [Custom2] adjust. Speaker output level NOTE
[-24] to [10] If [Off] is selected, the subwoofer adjustment is not available in
[Fader/Balance] TIPS [Speaker Level], [Time Alignment] and [Crossover].
[Crossover] Adjust the speaker output level of the listening position.
• If you touch [Custom1] or [Custom2], the equaliser curve 1 Touch or to select the listening position then
currently stored in [Custom1] or [Custom2] is recalled. [Subwoofer Settings]
select the output speaker.
• If the equaliser curve stored in [Custom1] or [Custom2] is 2 Touch or to adjust the selected speaker output
modified, each stored curve will be overwritten.
level.
• If you trail your finger across the bars of multiple equaliser
bands, the equaliser curve settings will be set to the value of the Select a speaker unit (filter) to adjust the HPF or LPF cutoff
touched point on each bar. frequency and the slope for each speaker unit (page 71).
Select the subwoofer phase (page 71).
• If the preset equaliser curve other than [Custom1] or [Custom2]
is modified, the curve setting will be overwritten in [Custom1].

Touch or to adjust the front/rear speaker balance.
Set [Front] and [Rear] to [0] when using a dual speaker
system.
Touch or to adjust the left/right speaker balance.

TIP

You can also set the value by dragging the point on the displayed
table.

[Mute Level] NOTE
Only the balance can be adjusted when [Network Mode] is
selected as the speaker mode.

Select mute or attenuate the AV source volume and iPhone
or smartphone application volume when the navigation
outputs the guidance voice.

68 En

Menu Item Description Menu Item Description English
[Listening Position]*1 [Rear Speaker Output]
Select a listening position that you want to make as the Select the rear speaker output.
[Off] [Front Left] [Front centre of sound effects. [Rear] [Subwoofer]
Right] [Front] [All] NOTES
[Time Alignment] Select or customise the time alignment settings to reflect [Loudness] • This function is available when [Standard Mode] is selected as
[On] [Off] the distance between the listener’s position and each [Off] [Low] [Mid] [High]
Listening position*1*2 speaker. You need to measure the distance between the the speaker mode.
[Off] [Front Left] [Front head of the listener and each speaker unit. • If [Subwoofer] is selected, the rear speaker adjustment is not
Right] [Front] [All] 1 Touch or to select the listening position then
Standard Mode*3*4 available in [Speaker Level], [Time Alignment] and [Crossover].
[Front Left] [Front Right] select the alignment speaker.
[Rear Left] [Rear Right] 2 Touch or to input the distance between the Compensates for deficiencies in the low-frequency and
[Subwoofer] high-frequency ranges at low volume.
Network Mode*3*4 selected speaker and listening position.
[High Left] [High Right] [Automatic Level Control] NOTE
[Mid Left] [Mid Right] TIP [Off] This function is not available while you make or receive a call using
[Subwoofer] If you touch [TA On], the time alignment is turned off mandatorily. [Mode1] the hands-free function.
Distance
[0] to [350] NOTE [Mode2] Corrects automatically the audio level difference between
[Auto EQ] This function is available only when the listening position setting the music files or the sources.
[On] [Off] is set to [Front Left] or [Front Right]. [Sound Retriever]
[Off] [Mode1] [Mode2] Turns the auto level control setting off.
[A-EQ&TA Measurement] Set the auto-adjusted equaliser to suit the vehicle’s
acoustics. To use this function, the Auto EQ measurement Corrects a little the audio level difference between the
[Save Settings] must be done in advance (page 70). music files or the sources (for the narrow dynamic range
audio signal).
[Load Settings] Measures and adjusts the vehicles acoustics, equaliser, and
time alignment automatically to suit the vehicle interior Corrects widely the audio level difference between the
[ASL] (page 70). music files or the sources (for the wide dynamic range
audio signal).
[Bass Boost] Save to recall the following current sound settings by
[0] to [6] touching [OK]: bass boost, slope, subwoofer phase, speaker Enhances compressed audio and restores rich sound
level, Graphic EQ, HPF/LPF, listening position, crossover, automatically.
time alignment.
TIP
TIP [Mode2] has a stronger effect than [Mode1].
When you touch [Cancel], return to the [Audio] setting screen.
*1 [All] is not available when [Network Mode] is selected as the speaker mode.
Load the sound settings. *2 If you change the listening position setting, the output levels of all the speakers will change in

NOTES conjunction with the setting.
• [Sound Setting] is available only when you have already saved *3 To use this function, the vehicle’s acoustics must be measured in advance.
*4 This function is available only when the [Listening Position] setting is set to [Front Left] or [Front
the sound settings (page 69).
• [Auto EQ&TA Setting] is available only when you have already Right].

performed Auto EQ measurement (page 69). Adjusting the equaliser curve automatically (Auto EQ)

Set to one of five levels to increase the volume level of the By measuring the vehicle’s acoustics, the equaliser curve can be adjusted automatically
audio depending on the driving speed and road to suit the vehicle interior.
conditions.
WARNING
Adjust the bass boost level.
A loud tone (noise) may be emitted from the speakers when measuring the vehicle’s acoustics. Never
perform Auto EQ measurement while driving.

En 69

CAUTION 1 Stop the vehicle in a quiet place, close all doors, windows, and sun roof, and then

• Thoroughly check the conditions before performing Auto EQ as the speakers may be damaged if this turn the engine off.
is performed under the following conditions: If the engine is left running, engine noise may prevent correct Auto EQ.
– When the speakers are incorrectly connected. (For example, when a rear speaker is connected as a
subwoofer output.) NOTE
– When a speaker is connected to a power amp delivering output higher than the speaker’s If driving restrictions are detected during measurement, the measurement is cancelled.
maximum input power capability.
2 Fix the microphone for acoustical measurement (sold separately) in the centre of
• If a microphone for acoustical measurement (sold separately) is not placed in the appropriate
location, the measurement tone may become loud and measurement may take a long time, resulting the headrest of the driver’s seat, facing forwards.
in battery drainage. Be sure to place the microphone in the specified location. The Auto EQ may differ depending on where you place the microphone. If desired,
place the microphone on the front passenger seat and perform Auto EQ.
▶Before operating the Auto EQ function
3 Disconnect the iPhone or smartphone device.
• Perform Auto EQ in a quiet place with the vehicle engine and air conditioning
switched off. Also, cut the power of car phones or mobile phones in the vehicle, or 4 Turn on the ignition switch (ACC ON).
remove them in advance. Surrounding sounds may prevent correct measurement of
the vehicle’s acoustics. If the vehicle’s air conditioner or heater is turned on, turn it off.

• Be sure to use the microphone for acoustical measurement (sold separately). Using 5 Switch the AV source to [Source OFF] (page 37).
other microphones may prevent measurement, or result in incorrect measurement of
the vehicle’s acoustics. 6 Press .

• To perform Auto EQ, the front speakers must be connected. 7 Touch then .
• When this product is connected to a power amp with input level control, Auto EQ may
8 Touch [A-EQ&TA Measurement].
be impossible if the power amp’s input level is set below the standard level.
• When this product is connected to a power amp with an LPF (low pass filter), turn the 9 Connect the microphone for acoustical measurement (sold separately) with this

LPF off before performing Auto EQ. Also, set the cutoff frequency for the built-in LPF of product.
an active subwoofer to the highest frequency. Z910DAB Z810DAB
• The distance has been calculated by a computer to provide optimum delay to ensure Plug the microphone into the Auto EQ microphone input jack on this product
accurate results. Do not change this value. (page 4).
– The reflected sound within the vehicle is strong and delay occurs. Z710DAB Z610BT Z7110DAB Z6110BT
– The LPF on active subwoofers or external amps delay the lower sounds. Plug the microphone into the AUX input jack on the back panel of this product (refer
• If an error occurs during measurement, check the following before measuring the to the Installation Manual).
vehicle’s acoustics.
– Front speakers (left/right) NOTE
– Rear speakers (left/right) Use an extension cable (sold separately) if the cord of the microphone (sold separately) is not long
– Noise enough.
– Microphone for acoustical measurement (sold separately)
– Low battery 10Touch [Front Left] or [Front Right] to select the current listening position.

▶Performing Auto EQ 11Touch [Start].

CAUTION A 10-second countdown starts.

Do not turn off the engine while the measurement is in progress. NOTE
The Bluetooth connection is disconnected before the process starts.
NOTES
• Auto EQ changes the audio settings as follows: 12Exit the vehicle and keep the doors closed until the countdown finishes.

– The fader/balance settings return to the centre position (page 68). When the countdown finishes, a measurement tone (noise) is emitted from the
• Previous settings for Auto EQ will be overwritten. speakers and Auto EQ measurement begins.

70 En 13Wait until the measurement is completed.

When Auto EQ is completed, a message is displayed. Menu Item Description English
[Subtitle Language]*1*2
NOTE [Audio Language]*1*2 Set a subtitle language preference. When you select
The measurement time varies depending on the type of vehicle. [Menu Language]*1*2 [Others], a language code input screen is shown. Input the
[Multi Angle] four-digit code of the desired language then touch .
TIP
To stop the measurement, touch [Stop]. [On] [Off] Set an audio language preference. When you select
[TV Aspect] [Others], a language code input screen is shown. Input the
14Store the microphone carefully in the glove box or another safe place. four-digit code of the desired language then touch .
[16:9]
If the microphone is subjected to direct sunlight for an extended period, high [Letter Box] Set a menu language preference. When you select [Others],
temperatures may cause distortion, colour change, or malfunction. [Pan Scan] a language code input screen is shown. Input the four-digit
code of the desired language then touch .
Adjusting the cutoff frequency value
Set to display the angle icon on the screen.
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted: Set the aspect ratio suitable for your rear display 16:9 (wide
[Standard Mode]: Front, Rear, Subwoofer. screen display) or 4:3 (regular display). (We recommend
[Network Mode]: High, Mid, Subwoofer. use of this function only when you want to fit the aspect
ratio to the rear display.)
NOTES
• Subwoofer settings are available only when [Subwoofer] is [On]. NOTES
• Rear speaker settings are available only when [Rear Speaker Output] is [Rear]. • When playing discs that do not have a panscan system, the disc

1 Press . is played back with [Letter Box] even if you select the [Pan Scan]
setting. Confirm whether the disc package bears the
2 Touch then . mark.
• The TV aspect ratio cannot be changed for some discs. For
3 Touch [Crossover] or [Subwoofer Settings]. details, refer to the disc's instructions.

4 Touch or to switch the speaker. Displays the wide screen image (16:9) as it is (initial
setting).
5 Drag the graph line to set the cutoff position.
Makes the image in the shape of a letterbox with black
6 Drag the lowest point of the graph to set the cutoff slope. bands on the top and bottom of the screen.

The following items can also be set. Cuts the image short on the right and left sides of the
screen.
Switches the subwoofer phase between normal and reverse position.

LPF/HPF Switches the LPF/HPF setting to [On] or [Off]. When it is turned off, the high-pass
filter or low-pass filter of each speaker can also be turned on by touching the
graph lines.

Video settings

The menu items vary according to the source.

[DVD/DivX Setup]
This setting is available only when [Disc] is selected as the source.

En 71

Menu Item Description Menu Item Description
[Parental]
Set restrictions so that children cannot watch violent or [DVD Auto Play] Set to display the DVD menu automatically and start
[DivX® VOD] adult-oriented scenes. You can set the parental lock level in [On] [Off] playback from the first chapter of the first title when a DVD
steps as desired. disc with a DVD menu is inserted.
1 Touch [0] to [9] to input a four-digit code number.
2 Touch . NOTE

Registers the code number, and you can now set the Some DVDs may not operate properly. If this function is not fully
level. operable, turn this function off and start playback.
3 Touch any number between [1] to [8] to select the
desired level. *1 You can switch the language by touching the switch languages key during playback.
*2 The setting made here will not be affected even if the language is switched during playback using
The lower the level is set, the tighter the restriction is
applied. the appropriate key.
4 Touch .
Sets the parental lock level. [Time Per Photo Slide]

NOTES Menu Item Description
• We recommend keeping a record of your code number in case Select the interval of image file slideshows on this product.
[Time Per Photo Slide]
you forget it. [5sec] [10sec] [15sec]
• The parental lock level is recorded on the disc. You can confirm it [Manual]

by looking at the disc package, the included booklet, or the disc [Video Signal Setting]
itself. You cannot use parental lock with discs that do not feature
a recorded parental lock level. Menu Item Description
• With some discs, parental lock operates to skip certain scenes Select the suitable video signal setting when you connect
only, after which normal playback resumes. For details, refer to [AV] this product to an AV equipment.
the disc's instructions. [Auto] [PAL] [NTSC] [PAL-
• When you set a parental lock level and then play a disc featuring M] [PAL-N] [SECAM] Select the suitable video signal setting when you connect
parental lock, code number input indications may be displayed. this product to an AUX equipment.
In this case, playback will begin when the correct code number is [AUX]
input. [Auto] [PAL] [NTSC] [PAL- Select the suitable video signal setting when you connect
M] [PAL-N] [SECAM] this product to a rear view camera.
Displays this product's registration and deregistration code
to register this product with your DivX VOD content [Camera]
provider to play DivX® VOD (video on demand) content on [Auto] [PAL] [NTSC] [PAL-
this product. M] [PAL-N] [SECAM]

TIP [Video Output Format]

You can do this by generating a DivX VOD registration code, which Menu Item Description
you submit to your provider.
[Registration Code] is 10-digit. [Video Output Format] Switches the video output format of the rear display
[Deregistration Code] is 8-digit. [PAL] [NTSC] between PAL and NTSC.

NOTE

Make a note of the code as you will need it when you register or
deregister from a DivX VOD provider.

72 En

Favourite menu Other functions

Registering your favourite menu items in shortcuts allows you to quickly jump to the Setting the time and date English
registered menu screen by a simple touch on the [Favorites] screen.
1 Touch the current time on the screen.
NOTE 2 Touch one of the items to adjust.
Up to 12 menu items can be registered in the favourite menu.
• You can change the time display format to [12hour] or [24hour].
Creating a shortcut • You can change the order of date display format: Day-month, Month-day.

1 Press then touch . Changing the wide screen mode

2 Touch the star icon of the menu item. You can set the screen mode for AV screen and image files.

The star icon for the selected menu is filled in. 1 Touch the screen display mode key.

TIP
To cancel the registration, touch the star icon in the menu column again.

Selecting a shortcut

1 Press then touch .

2 Touch .

3 Touch the menu item.

Removing a shortcut

1 Press then touch . Screen display mode key

2 Touch . 2 Touch the desired mode.

3 Touch and hold the favourite menu column. [Full] A 4:3 picture is enlarged in the horizontal direction only, enabling you to enjoy an
image without any omissions.
The selected menu item is removed from the [Favorites] screen. [Zoom]
[Normal] A 4:3 picture is enlarged in the same proportion both vertically and horizontally.
TIP [Trimming]
You can also remove a shortcut by touching and holding the registered menu column. A 4:3 picture is displayed normally, without changing its proportion.

An image is displayed across the entire screen with the horizontal-to-vertical ratio
left as is. If the screen ratio differs from the image, the image may be displayed
partly cut off either at the top/bottom or sides.

NOTE
[Trimming] is for image files only.

En 73

TIPS [Source OFF] Nothing is output to the rear display.

• Different settings can be stored for each video source. * AVIC-Z910DAB/AVIC-Z810DAB
• When a video is viewed in wide screen mode that does not match its original aspect ratio, it may
Setting the anti-theft function
appear different.
• The video image will appear coarser when viewed in [Zoom] mode. You can set a password for this product. If the back-up lead is cut after the password is
set, this product prompts for the password at the time of next boot up.
NOTES
• Image files can be set to either [Normal] or [Trimming] in wide screen mode. Important
• This setting is available only when you stop your vehicle in a safe place and apply the handbrake. If you forgot your password, contact the nearest authorised Pioneer Service Station.

Selecting the video for the rear display

You can choose either to show the same image as the front screen or to show the Setting the password
selected source on the rear display.
1 Press .
NOTES 2 Touch then .
3 Touch 1, followed by 2, and then touch 3.
• Video files on the external storage device are not available as a source for the rear display when
[Apple CarPlay] is activated.

• Video files on the external storage device are not available as a source for the rear display when
[Android Auto] is activated in [Smartphone Setup].*

* AVIC-Z910DAB/AVIC-Z810DAB

1 Press then touch .

2 Touch [Rear].

3 Touch the source you want to show on the rear display.

[Mirror] The video on the front screen of this product is output to the rear display. 4 Touch [Set Password].
[DVD/CD]
[USB1] NOTE 5 Enter the password.
[SD]* Not all videos or sounds can be output to the rear display.
[AV] The video and sound of a disc are output to the rear display. 5 to 16 characters can be entered for a password.

NOTE 6 Touch [Go].
Compatible video types are DVD-V, Video-CD, DivX, MPEG-1, MPEG-2, and MPEG-
4 only. 7 Enter a password hint.
The video and sound of the USB storage device is output to the rear display.
Up to 40 characters can be entered for a hint.
NOTES
• The port that supports the rear display will only be USB port 1. 8 Touch [Go].
• Compatible file types are MPEG-4, H.264, WMV, MKV, and FLV only.
The video and sound of the SD memory cards are output to the rear display. If you want to change the password currently set, enter the current password and
then enter the new one.
NOTE
Compatible file types are MPEG-4, H.264, WMV, MKV, and FLV only. 9 Check the password, and then touch [OK].
The video and/or sound of the AV input source are output to the rear display.

NOTE
The video image and sound are output only when [AV Input] is set to [Source]
(page 58).

74 En

Deleting the password Appendix

The current password and password hint can be deleted. Troubleshooting → The loaded disc is a type this product English
cannot play.
1 Press . If you have problems operating this – Check what type of disc it is.
2 Touch then . product, refer to this section. The most
3 Touch 1, followed by 2, and then touch 3 (page 74). common problems are listed below, along The screen is covered by a caution
4 Touch [Clear Password]. with likely causes and solutions. If a message and the video cannot be shown.
5 Touch [Yes]. solution to your problem cannot be found → The handbrake lead is not connected or
6 Touch [OK]. here, contact your dealer or the nearest
7 Enter the current password. authorised Pioneer service facility. the handbrake is not applied.
8 Touch [Go]. – Connect the handbrake lead correctly,
Common problems
A message indicating that the security setting is cancelled appears. and apply the handbrake.
A black screen is displayed, and → The handbrake interlock is activated.
Restoring this product to the default settings operation is not possible using the touch
panel keys. – Park your vehicle in a safe place and
You can restore settings or recorded content to the default settings from [Restore → [Power OFF] mode is on. apply the handbrake.
Settings] in the [System] menu (page 63).
– Press any button on this product to No video output from the connected
release the mode. equipment.
→ The [AV Input] or [AUX Input] setting is
– Press and hold to release the rear
view camera screen and then change incorrect.
the camera polarity setting to – Correct the settings.
[Battery].
The audio or video skips.
Problems with the AV screen → This product is not firmly secured.

CD or DVD playback is not possible. – Secure this product firmly.
→ The disc is inserted upside down.
No sounds are produced. The volume
– Insert the disc with the label upward. level will not rise.
→ The disc is dirty. → Cables are not connected correctly.

– Clean the disc. – Connect the cables correctly.
→ The disc is cracked or otherwise → The system is performing still, slow

damaged. motion, or frame-by-frame playback
– Insert a normal, round disc. with DVD-Video.
→ The files on the disc are in an irregular – There is no sound during still, slow
file format.
– Check the file format. motion, or frame-by-frame playback
→ The disc format cannot be played back. with DVD-Video.
– Replace the disc. → The system is paused or performing fast
reverse or forwards during the disc
playback.
– For the media other than music CD
(CD-DA), there is no sound on fast
reverse or forwards.

En 75

The icon is displayed, and operation is – Since this product is compatible with Problems with Application occurs when the reverse gear polarity
impossible. the copy guard analogue copy protect screen setting of this product is incorrect.
→ The operation is not compatible with system, the picture may suffer from – Check the polarity and re-select the
horizontal stripes or other A black screen is displayed.
the video configuration. imperfections when a disc with that → While operating an application, the correct setting.
– The operation is not possible. (For kind of protection signal is viewed on
some displays. This is not a application was ended on the Error messages
example, the DVD playing does not malfunction. smartphone side.
feature that angle, audio system, – Press to display the top menu When problems occur with this product, an
subtitle language, etc.) iPod cannot be operated. error message appears on the display.
→ The iPod is frozen. screen. Refer to the table below to identify the
The picture stops (pauses) and this → The smartphone OS may be awaiting problem, then take the suggested
product cannot be operated. – Reconnect the iPod with the USB corrective action. If the error persists,
→ The reading of data is impossible during interface cable for iPod/iPhone. screen operation. record the error message and contact your
– Stop the vehicle in a safe place and dealer or your nearest Pioneer service
disc playback. – Update the iPod software version. centre.
– Stop playback once, then restart. → An error has occurred. check the screen on the smartphone.
Common
The picture is stretched, with an incorrect – Reconnect the iPod with the USB The screen is displayed, but operation
aspect ratio. interface cable for iPod/iPhone. does not work at all. AMP Error
→ The aspect setting is incorrect for the → An error has occurred. → This product fails to operate or the
– Park your vehicle in a safe place, and
display. then turn off the ignition switch (ACC – Park your vehicle in a safe place, and speaker connection is incorrect; the
– Select the appropriate setting for that OFF). Subsequently, turn the ignition then turn off the ignition switch (ACC protective circuit is activated.
switch to on (ACC ON) again. OFF). Subsequently, turn the ignition – Check the speaker connection. If the
image. switch to on (ACC ON) again.
– Update the iPod software version. message fails to disappear even after
A parental lock message is displayed and → Cables are not connected correctly. – When an Android device is connected, the engine is switched off/on, contact
DVD playback is not possible. disconnect the Bluetooth connection your dealer or an authorised Pioneer
→ The parental lock is on. – Connect the cables correctly. from this product and then reconnect Service Station for assistance.
it.
– Turn the parental lock off or change Sound from the iPod cannot be heard. TEMP
the level. → The audio output direction may switch The smartphone was not charged. → The temperature of this product is
→ Charging stopped because the
The parental lock for DVD playback automatically when the Bluetooth and outside the normal operating range.
cannot be canceled. USB connections are used at the same temperature of the smartphone rose – Wait until this product returns to a
→ The code number is incorrect. time. due to prolonged use of the
– Use the iPod to change the audio smartphone during charging. temperature within the normal
– Input the correct code number. – Disconnect the smartphone from the operating limits.
output direction.
The DVD video is not played back with cable, and wait until the smartphone Product overheat, For protection the
the audio/subtitle language specified in Problems with the phone screen cools down. System will shut down automatically in 1
[DVD/DivX Setup]. → More battery power was consumed minute. Re-cycle the ignition to restart
→ The DVD does not support the Dialing is impossible because the touch than was gained from charging. the product If this message keeps
panel keys for dialing are inactive. – This problem may be resolved by showing, please contact your dealer or
language selected in [DVD/DivX Setup]. → Your phone is out of range for service. stopping any unnecessary services on local service centre
– Playback in the selected language is the smartphone. → The temperature is too high for this
– Retry after re-entering the range for
not possible if the language selected service. The status of the vehicle for the forwards product to operate.
in [DVD/DivX Setup] is not recorded and backwards directions are reversed. – Follow the instructions displayed on
on the disc. → The connection between the mobile → Since part of the vehicle status is sent to
phone and this product cannot be the screen. If this does not solve the
The picture is extremely unclear/ established. the connected device when you use the
distorted and dark during playback. – Perform the connection process. Android Auto function, this problem
→ The disc features a signal to prohibit

copying. (Some discs may have this.)

76 En

problem, contact your dealer or an Detected changes in the installation Unplayable Disc – Select a file that can be played. English
authorised Pioneer Station for angle or position. The in-dash receiver is → This type of disc cannot be played on
assistance. updating the sensor learning data. Audio Format not supported
→ Changes in the installation angle or this product. → This type of file is not supported on this
Positioning is not possible due to – Replace the disc with one that can be
hardware error. Please consult your position are detected. product.
dealer or local authorised service centre. – Wait until the sensor learning finishes. played on this product. – Select a file that can be played.
→ The location display is not possible due
Speed pulse wire is not connected. The Unplayable File External storage device (USB,
to hardware failure. system will operate in simple hybrid → This type of file cannot be played on this SD)
– Contact your dealer or an authorised mode.
→ Speed pulse wire is not connected. product. SD function is only available for AVIC-
Pioneer Station for assistance. – Select a file that can be played. Z910DAB/AVIC-Z810DAB.
– The speed pulse cannot be detected if
No GPS antenna. Check connection. the speed pulse wire is not connected Skipped Error-02-9X/-DX
→ GPS reception is lost. correctly. → The inserted disc contains DRM → Communication failed.

– Check the aerial connection. If the DAB tuner protected files. – Turn the ignition switch OFF and back
message fails to disappear even after – The protected files are skipped. ON.
the engine is switched off/on, contact Z910DAB Z810DAB Z710DAB Z7110DAB
your dealer or an authorised Pioneer Protect – Disconnect the USB storage device.
Station for assistance. Check Antenna → All the files on the inserted disc are – Change to a different source. Then,
→ The aerial connection is incorrect or an
GPS antenna problem detected. Contact embedded with DRM. return to the USB storage device.
dealer or service center. unusual voltage has been detected. – Replace the disc.
→ GPS aerial lead is short-circuited. – Turn the ignition switch OFF and Unplayable File
This DivX rental has expired. → There is no playable file in the external
– Contact your dealer or an authorised connect the aerial correctly. After → The inserted disc contains expired DivX
Pioneer Station for assistance. connecting, turn back ON again. storage device (USB, SD).
VOD content. – Check that the files in the external
Calibration will start, but may be Disc – Select a file that can be played.
inaccurate without speed pulse. storage device (USB, SD) are
→ The speed pulse sensor is not Error-02-XX/FF-FF Video resolution not supported compatible with this product.
→ The disc is dirty. → Files that cannot be played on this → Security for the connected external
connected correctly. storage device (USB, SD) is enabled.
– Contact your dealer or an authorised – Clean the disc. product are included in the file. – Follow the external storage device
→ The disc is scratched. – Select a file that can be played. (USB, SD) instructions to disable
Pioneer Station for assistance. security.
– Replace the disc. Unable to write to flash memory
Sensor error. Please contact your dealer → The disc is loaded upside down. → The playback history for VOD contents Skipped
or Pioneer Service Center. → The connected external storage device
→ An error has occurred with the sensor. – Check that the disc is loaded correctly. cannot be saved for some reason.
→ There is an electrical or mechanical – Retry. (USB, SD) contains DRM protected files.
– Contact your dealer or an authorised – If the message appears frequently, – The protected files are skipped.
Pioneer Station for assistance. error.
– Press the RESET button. consult your dealer. Protect
Detected unusual speed pulses. → All the files on the connected external
→ The speed pulse cannot be detected Different Region Disc Your device is not authorized to play this
→ The disc does not have the same region DivX protected video. storage device (USB, SD) are embedded
correctly. → This product’s DivX registration code with DRM.
– Contact your dealer or an authorised number as this product. – Replace the external storage device
– Replace the DVD with one bearing the has not been authorised by the DivX
Pioneer Station for assistance. VOD contents provider. (USB, SD).
correct region number. – Register this product to the DivX VOD

contents provider.

Video frame rate not supported
→ DivX file’s frame rate is more than 30 fps.

En 77

Incompatible USB USB1 was disconnected for device Bluetooth – Restart the smartphone.
→ The connected USB storage device is protection. Do not re-insert this USB – Turn the ignition switch to OFF and
memory into the unit. Press reset to Error-10
not supported by this product. restart USB memory. (USB2 was → The power failed for the Bluetooth then to ON.
– Disconnect your device and replace it disconnected for device protection. Do If the error message is still displayed after
not re-insert this USB memory into the module of this product. performing the above action, please
with a compatible USB storage device. unit. Press reset to restart USB memory.) – Turn the ignition switch to OFF and contact your dealer or an authorised
→ The USB connector or USB cable is Pioneer Service Station.
Incompatible SD then to ON. → The time set in this product is not
→ The SD memory card is not supported short-circuited. If the error message is still displayed after
– Check that the USB connector or USB performing the above action, please correct.
by this product. contact your dealer or an authorised – Check if GPS signals are received and
– Remove your device and replace it cable is not caught in something or Pioneer Service Station.
damaged. the time is correctly set.
with a compatible SD memory card. → The connected USB storage device Apple CarPlay
– Format the SD memory card. It is consumes more than maximum Bluetooth pairing failed. Please pair your
allowable current. Attempting to connect to Apple CarPlay. Android phone manually.
recommended that you use SD – Disconnect the USB storage device → Communication failed and the system is → The Bluetooth pairing failed for some
Formatter for formatting SD memory and do not use it. Turn the ignition
cards. switch to OFF, then to ACC or ON and trying to connect. reasons.
then connect a compliant USB storage → Wait for a while. Then, perform the – Pair this product with the device
Check USB device.
→ The USB connector or USB cable has → The USB interface cable for iPod/iPhone actions below if the error message is still manually.
is short-circuited. displayed.
short-circuited. – Confirm that the USB interface cable – Restart the iPhone. To use Android Auto, please stop your car
– Check that the USB connector or USB for iPod/iPhone or USB cable is not – Disconnect the cable from the iPhone, and check your Android phone.
caught in something or damaged. → The default settings are displayed on
cable is not caught in something or and then connect the iPhone again
damaged. Audio Format not supported after a few seconds. the screen of the Android Auto
→ The connected USB storage device → This type of file is not supported on this – Turn the ignition switch to OFF and compatible device or images are not
consumes more than maximum then to ON. output from the Android Auto
allowable current. product. If the error message is still displayed after compatible device.
– Disconnect the USB storage device – Select a file that can be played. performing the above action, please – Park your vehicle in a safe place, and
and do not use it. Turn the ignition contact your dealer or an authorised
switch to OFF, then to ACC or ON and iPod Pioneer Service Station. follow the instructions displayed on
then connect a compliant USB storage the screen. If the error message is still
device. Error-02-6X/-9X/-DX Android Auto displayed after performing on-screen
→ iPod failure. instructions, please reconnect the
HUB Error Z910DAB Z810DAB device.
→ The connected USB hub is not – Disconnect the cable from the iPod.
Once the iPod’s main menu is Android Auto has stopped. Positioning technology
supported by this product. displayed, reconnect the iPod and → The connected device is not compatible
– Directly connect the USB storage reset it. Positioning by GPS
with Android Auto.
device to this product. Error-02-67 – Check if the device is compatible with The Global Positioning System (GPS) uses a
→ The iPod firmware version is old. network of satellites orbiting the Earth.
No Response Android Auto. Each of the satellites, which orbit at a
→ This product cannot recognise the – Update the iPod version. → The startup of Android Auto failed for height of 68 900 000 feet (21 000 km),
continually broadcasts radio signals giving
connected USB storage device. some reasons. time and position information. This
– Disconnect the device and replace it – Disconnect the cable from the ensures that signals from at least three can

with another USB storage device. smartphone, and then connect the
smartphone again after a few seconds.
Video resolution not supported
→ Files that cannot be played on this

product are included in the file.
– Select a file that can be played.

78 En

be picked up from any open area on the authorised Pioneer dealer or an With map matching In this case, it is impossible for the system
ground’s surface. installation professional. to use GPS positioning.
The accuracy of the GPS information • Some types of vehicles may not output a
depends on how good the reception is. speed signal while driving at just a few In tunnels or enclosed parking garages
When the signals are strong and reception kilometres per hour. In such a case, the
is good, GPS can determine latitude, current location of your vehicle may not English
longitude and altitude for accurate be displayed correctly while in traffic jam
positioning in three dimensions. But if or in a car park. Without map matching Under elevated roads or similar
signal quality is poor, only two dimensions, structures
latitude and longitude, can be obtained How do GPS and dead reckoning
and positioning errors are somewhat When driving among high buildings
greater. work together?
Handling large errors When driving through a dense forest
Positioning by dead reckoning For maximum accuracy, your navigation or tall trees
system continually compares GPS data Positioning errors are kept to a minimum
The built-in sensor in the navigation with your estimated position as calculated by combining GPS, dead reckoning and • If a car phone or mobile phone is used
system also calculates your position. The from the data of built-in sensor. However, if map matching. However, in some near the GPS aerial, GPS reception may
current location is measured by detecting only the data from the built-in sensor is situations, these functions may not work be lost temporarily.
driving distance with the speed pulse, the available for a long period, positioning properly, and the error may become
turning direction with the gyro sensor and errors are gradually compounded until the bigger.
inclination of the road with the G sensor. estimated position becomes unreliable. For
The built-in sensor can even calculate this reason, whenever GPS signals are When positioning by GPS is
changes of altitude, and correct the available, they are matched with the data impossible
discrepancies in the distance travelled of the built-in sensor and used to correct it
caused by driving along winding roads or for improved accuracy. • GPS positioning is disabled if signals
up slopes. • If you use chains on your wheels for cannot be received from more than two
If you use this navigation system with GPS satellites.
connecting the speed pulse, the system winter driving or put on the spare wheel,
will become more accurate than no errors may suddenly increase because of • In some driving conditions, signals from
connection of speed pulse. So you connect difference in wheel diameter. Initialise the GPS satellites may not reach your vehicle.
the speed pulse without fail to get the sensor status and it may recover the
accuracy of positioning. accuracy to normal condition (page 66).
• The position of the speed detection
Map matching
circuit vary depending on the vehicle As mentioned, the positioning systems
model. For details, consult your used by this navigation system are
susceptible to certain errors. Their
calculations may, on occasion, place you in
a location on the map where no road
exists. In this situation, the processing
system understands that vehicles travel
only on roads, and can correct your
position by adjusting it to a nearby road.
This is called map matching.

En 79

• Do not cover the GPS aerial with spray If there is another road very nearby, If the road has a series of hairpin If you are driving on a long, straight
paint or car wax, because this may block such as in the case of an elevated bends. road or a gently curving road.
the reception of GPS signals. Snow motorway.
buildup can also degrade the signals, so If there is a loop or similar road If you are on a steep mountain road
keep the aerial clear. If you take a recently opened road that configuration. with many height changes.
is not on the map.
NOTE
If a GPS signal has not been received for a
long time, your vehicle’s actual position
and the current position mark on the map
may diverge considerably or may not be
updated. In such case, once GPS reception
is restored, accuracy will be recovered.

Conditions likely to cause noticeable
positioning errors
For various reasons, such as the state of the
road you are travelling on and the
reception status of the GPS signal, the
actual position of your vehicle may differ
from the position displayed on the map
screen.

If you make a slight turn.

If you enter or exit a multi-storey car
park or similar structure using a spiral
ramp.

If you take a ferry.

If there is a parallel road.

If you drive in zigzags.

80 En

If your vehicle is turned on a turntable If trees or other obstacles block the When you drive around a roundabout. • The calculated route is one example of
or similar structure. GPS signals for a considerable period. the route to your destination decided by
When starting driving immediately the navigation system while taking the
after starting the engine. type of streets or traffic regulations into English
account. It is not necessarily an optimum
If you drive very slowly, or in a start- Route setting route. (In some cases, you may not be
and-stop manner, as in a traffic jam. information able to set the streets you want to take. If
you need to take a certain street, set a
If your vehicle’s wheels spin, such as on Route search specifications waypoint on that street.)
a rough track or in snow.
Your navigation system sets a route to your • If the destination is too far, there may be
If you join the road after driving destination by applying certain built-in instances where the route cannot be set.
around a large car park. rules to the map data. This section provides (If you want to set a long-distance route
some useful information about how a going across several areas, set waypoints
If you put on chains, or change your route is set. along the way.)
tyres for ones with a different size.
CAUTION • During voice guidance, turns and
When a route is calculated, the route and intersections from the motorway are
voice guidance for the route are announced. However, if you pass
automatically set. Also, for day or time intersections, turns, and other guidance
traffic regulations, only information about points in rapid succession, some may
traffic regulations applicable at the time delay or not be announced.
when the route was calculated is
considered. One-way streets and street • It is possible that guidance may direct
closures may not be taken into you off a motorway and then back on
consideration. For example, if a street is again.
open during the morning only, but you
arrive later, it would be against the traffic • In some cases, the route may require you
regulations so you cannot drive along the to travel in the opposite direction to your
set route. When driving, please follow the current heading. In such cases, you are
actual traffic signs. Also, the system may instructed to turn around, so please turn
not know some traffic regulations. around safely by following the actual
traffic rules.

• In some cases, a route may begin on the
opposite side of a railway or river from
your actual current location. If this
happens, drive towards your destination
for a while, and try route calculation
again.

• When there is a traffic jam ahead, a
detour route may not be suggested if
driving through the traffic jam would still
be better than taking the detour.

• There may be instances when the starting
point, the waypoint and the destination
point are not on the highlighted route.

• The number of roundabout exits
displayed on the screen may differ from
the actual number of roads.

En 81

Route highlighting • To clean a disc, wipe it with a soft cloth, CD
• Once set, the route is highlighted in moving outward from the centre.
AVCHD recorded discs Detailed information
bright colour on the map. • Condensation may temporarily impair for playable media
• The immediate vicinity of your starting the built-in drive’s performance. This unit is not compatible with discs
recorded in AVCHD (Advanced Video Compatibility
point and destination may not be • Playback of discs may not be possible Codec High Definition) format. Do not
highlighted, and neither will areas with because of disc characteristics, disc insert in AVCHD discs. If inserted, the disc Common notes about disc
particularly complex road layouts. format, recorded application, playback may not be ejected. compatibility
Consequently, the route may appear to environment, storage conditions and so • Certain functions of this product may not
be cut off on the display, but voice on. Playing DualDisc
guidance will continue. be available for some discs.
• Road shocks may interrupt disc playback. • DualDiscs are two-sided discs that have a • Compatibility with all discs is not
Auto reroute function • Read the precautions for discs before recordable CD for audio on one side and
• If you deviate from the set route, the a recordable DVD for video on the other. guaranteed.
using them. • It is not possible to play DVD-RAM discs.
system will re-calculate the route from • Playback of the DVD side is possible with • Playback of discs may become impossible
that point so that you remain on track to Ambient conditions for playing a this product. However, since the CD side
the destination. disc of DualDiscs is not physically compatible with direct exposure to sunlight, high
• This function may not work under certain with the general CD standard, it may not temperatures, or depending on the
conditions. • At extremely high temperatures, a be possible to play the CD side with this storage conditions in the vehicle.
temperature cutout protects this product product.
Handling and care of by switching it off automatically. DVD-Video discs
discs • Frequent loading and ejecting of a • DVD-Video discs that have incompatible
• Despite our careful design of the product, DualDisc may result in scratches to the
Some basic precautions are necessary small scratches that do not affect actual disc. region numbers cannot be played on this
when handling your discs. operation may appear on the disc surface DVD drive. The region number of the
as a result of mechanical wear, ambient • Serious scratches can lead to playback player can be found on this product’s
Built-in drive and care conditions for use or handling of the disc. problems on this product. In some cases, chassis.
This is not a sign of the malfunction of a DualDisc may become stuck in the disc-
• Use only conventional, fully circular discs. this product. Consider it to be normal loading slot and will not eject. To prevent DVD-R/DVD-RW/DVD-R SL (Single
Do not use shaped discs. wear and tear. this, we recommend you refrain from Layer)/DVD-R DL (Dual Layer) discs
using DualDisc with this product. • Unfinalised discs which have been
• Do not use cracked, chipped, warped, or Playable discs
otherwise damaged discs as they may • Please refer to the manufacturer for more recorded with the Video format (video
damage the built-in drive. DVD-Video detailed information about DualDiscs. mode) cannot be played back.
• Discs which have been recorded with the
• Use 12-cm discs. Do not use 8-cm discs or • is a trademark of DVD Format/Logo Dolby Digital Video Recording format (VR mode)
an adapter for 8-cm discs. Licensing Corporation. cannot be played back.
This product will down-mix Dolby Digital signals • DVD-R DL (Dual Layer) discs which have
• When using discs that can be printed on • It is not possible to play DVD Audio discs. internally and the sound will be output in stereo. been recorded with Layer Jump
label surfaces, check the instructions and This DVD drive may not be able to play all • Manufactured under license from Dolby recording cannot be played back.
the warnings of the discs. Depending on discs bearing the marks shown above. • For detailed information about recording
the discs, inserting and ejecting may not Laboratories. Dolby, Dolby Audio and the mode, please contact the manufacturer
be possible. Using such discs may result double-D symbol are trademarks of of media, recorders, or writing software.
in damage to this equipment. Dolby Laboratories.

• Do not attach labels, write on or apply
chemicals to the surface of the discs.

• Do not attach commercially available
labels or other materials to the discs.

82 En

CD-R/CD-RW discs • It may not be possible to play some music become jammed under the brake or are associated even if the file names are English
files from SD or USB because of file accelerator. not the same.
• Unfinalised discs cannot be played back. characteristics, file format, recorded • There may be a slight delay when starting • The subtitle file must be stored in the
• It may not be possible to playback CD-R/ application, playback environment, playback of audio files encoded with same folder as the DivX file.
storage conditions, and so on. image data. • Up to 255 subtitle files may be used. Any
CD-RW discs recorded on a music CD • Some USB storage devices connected to more subtitle files will not be recognised.
recorder or a computer because of disc • Copyright protected files cannot be this product may generate noise on the • Up to 64 characters can be used for the
characteristics, scratches or dirt on the played back. radio. name of the subtitle file, including the
disc, or dirt, scratches or condensation on • Do not connect anything other than the extension. If more than 64 characters are
the lens of the built-in drive. SD memory cards USB storage device. used for the file name, the subtitle file
• Playback of discs recorded on a computer may not be recognised.
may not be possible, depending on the • For details about SD memory card Common notes about DivX files • The character code for the subtitle file
recording device, writing software, their compatibility with this product, refer to should comply with ISO-8859-1. Using
settings, and other environmental Specifications (page 87). • Only DivX files downloaded from DivX characters other than ISO-8859-1 may
factors. partner sites are guaranteed for proper cause the characters to be displayed
• Please record with the correct format. • Some SD memory cards may not be operation. Unauthorised DivX files may incorrectly.
(For details, please contact manufacturer recognised by this unit even if the SD not operate properly. • The subtitles may not be displayed
of media, recorders, or writing software.) memory cards can be recognised by a correctly if the displayed characters in the
• Titles and other text information computer. Formatting the SD memory • DRM rental files cannot be operated until subtitle file include control code.
recorded on a CD-R/CD-RW disc may not cards using a dedicated formatter may playing back is started. • For materials that use a high transfer rate,
be displayed by this product (in the case resolve the problem. SD memory cards the subtitles and video may not be
of audio data (CD-DA)). formatted using the standard formatting • This product corresponds to a DivX file completely synchronised.
• Read the precautions with CD-R/CD-RW function on a computer do not comply display of up to 1 590 minutes 43 • If multiple subtitles are programmed to
discs before using them. with the SD standard. Problems such as seconds. Search operations beyond this display within a very short time frame,
that those cards cannot be read or time limit are prohibited. such as 0.1 seconds, the subtitles may not
Common notes about the external written could occur. It is recommended be displayed at the correct time.
storage device (USB, SD) that you use a dedicated formatter to • DivX VOD file playback requires
avoid such problems. All of the data supplying the ID code of this product to Media compatibility chart
SD function is only available for AVIC- stored on an SD memory card will be the DivX VOD provider. Regarding the ID
Z910DAB/AVIC-Z810DAB. deleted when the card is formatted. Back code, refer to Displaying your DivX VOD SD function is only available for AVIC-
• Do not leave the external storage device up any needed data beforehand as registration code on page 72. Z910DAB/AVIC-Z810DAB.
necessary. A dedicated formatter for SD
(USB, SD) storage device in any location memory cards can be obtained from the • For details on the DivX video versions General
with high temperatures. following site. that can be played on this product, refer • Files may not be played back properly
• Depending on the kind of the external https://www.sdcard.org/ to Specifications (page 87).
storage device (USB, SD) storage device depending on the environment in which
you use, this product may not recognise • This product is not compatible with the • For more details about DivX, visit the the file was created or on the contents of
the storage device or files may not be Multi Media Card (MMC). following site: http://www.divx.com/ the file.
played back properly. • This product may not play back files,
• The text information of some audio and USB storage device DivX subtitle files depending on the application used to
video files may not be correctly • For details about USB storage device • Srt format subtitle files with the encode the files.
displayed. • This product may not operate correctly,
• File extensions must be used properly. compatibility with this product, refer to extension “.srt” can be used. depending on the application used to
• There may be a slight delay when starting Specifications (page 87). • Only one subtitle file can be used for each encode WMA files.
playback of files on an external storage • Protocol: bulk • Depending on the version of Windows
device (USB, SD) storage device with • You cannot connect a USB storage device DivX file. Multiple subtitle files cannot be Media™ Player used to encode WMA files,
complex folder hierarchies. to this product via a USB hub. associated.
• Operations may vary depending on the • Partitioned USB storage device is not • Subtitle files that are named with the
kind of an external storage device (USB, compatible with this product. same character string as the DivX file
SD) storage device. • Firmly secure the USB storage device before the extension are associated with
when driving. Do not let the USB storage the DivX file. The character strings before
device fall onto the floor, where it may the extension must be exactly the same.
However, if there is only one DivX file and
one subtitle file in a single folder, the files

En 83

album names and other text information DVD-R/-R SL/-R DL/DVD-RW WMA compatibility without video data, DivX files encoded
may not be correctly displayed. with LPCM (Linear PCM) audio codec
• There may be a slight delay when starting CODEC FORMAT MP3, WMA, • This product is not compatible with the • Depending on the file information
playback of audio files encoded with AAC, MPEG2, following: Windows Media™ Audio 9 composition, such as the number of
image data. FILE SYSTEM MPEG4 Professional, Lossless, Voice audio streams, there may be a slight
• This product is not compatible with delay in the start of playback on discs.
packet write data transfer. MAX. FOLDER No. ISO 9660 level SAMPLING FREQUENCY USB: 32 kHz to • If a file contains more than 4 GB, playback
• This product can recognise up to 32 MAX. FILE No. 1, level 2, TRANSMISSION RATE 48 kHz stops before the end.
characters, beginning with the first Romeo Joliet Disc: 8 kHz to • Some special operations may be
character, including extension for the file 48 kHz prohibited because of the composition of
and folder name. Depending on the 700 DivX files.
display area, this product may try to USB: 48 kbps to • Files with high transfer rates may not be
display them with a reduced font size. 3 500 320 kbps (CBR), played back correctly. The standard
However, the maximum number of the VBR transfer rate is 4 Mbps for CDs and 10.08
characters that you can display varies USB storage device/SD memory card Disc: 5 kbps to Mbps for DVDs.
according to the width of each character, 320 kbps (CBR), • DivX files on the external storage device
and of the display area. CODEC FORMAT MP3, WMA, VBR (USB, SD) cannot be played.
• Folder selection sequence or other AAC, WAV,
operations may be altered, depending on FILE SYSTEM FLAC, H.264, WAV compatibility CD-R/-RW, DVD-R/-R SL/-R DL/DVD-RW
the encoding or writing software. MAX. DIRECTORY MPEG2, MPEG4,
• Regardless of the length of blank section MAX. FOLDER No. WMV, FLV, MKV, • The sampling frequency shown in the EXTENSION .avi/.divx
between the songs of original recording, JPEG display may be rounded. PROFILE
compressed audio discs play with a short MAX. FILE No. Home Theater
pause between songs. FAT16/32/NTFS • WAV files on the CD-R/-RW, DVD-R/-RW/- MAX RESOLUTION Profile
• Maximum playback time of audio file R SL/-R DL cannot be played.
stored in the disc: 60 h 8 720 x 576
• Maximum playback time of audio file DECODING FORMAT LPCM
stored on an external storage device FAT16, FAT32: SAMPLING FREQUENCY Audio and video files compatibility
(USB, SD): 7.5 h (450 minutes) 65 536 16 kHz to 48 (USB, SD)
• This product assigns folder numbers. The NTFS: TRANSMISSION RATE kHz
user cannot assign folder numbers. No limit • Files may not be able to be played back
Approx. 1.5 depending on the bit rate.
FAT16, FAT32: Mbps
65 536 • Only USB storage devices can play back
NTFS: AAC compatibility VOB files.
No limit
• This product plays back AAC files
MP3 compatibility encoded by iTunes.

• Ver. 2.x of ID3 tag is prioritised when both SAMPLING FREQUENCY 11.025 kHz to .avi
Ver. 1.x and Ver. 2.x exist. TRANSMISSION RATE 48 kHz
CD-R/-RW Compatible video codec MPEG4, H.264,
• This product is not compatible with the USB: 16 kbps to H.263, Xvid
CODEC FORMAT MP3, WMA, following: MP3i (MP3 interactive), mp3 320 kbps (CBR) Maximum resolution
AAC, DivX, PRO, m3u playlist Disc: 8 kbps to Maximum frame rate 1 920 x 1 080
FILE SYSTEM MPEG1, MPEG2, 320 kbps (CBR)
MPEG4 SAMPLING FREQUENCY 16 kHz to 48 30 fps
MAX. DIRECTORY TRANSMISSION RATE kHz FLAC compatibility
MAX. FOLDER No. ISO 9660 level ID3 TAG • FLAC files on the CD-R/-RW, DVD-R/-RW/- .mp4
MAX. FILE No. 1, level 2, 8 kbps to 320
Romeo Joliet kbps, VBR R SL/-R DL cannot be played. Compatible video codec MPEG4, H.264,
H.263
No limit USB: SAMPLING FREQUENCY 8 kHz to 192 Maximum resolution
v1,v1.1,v2.2,v2. kHz Maximum frame rate 1 920 x 1 080
700 3,v2.4
Disc: DivX compatibility 30 fps
999 v1,v1.1,v2.2,v2. • This product is not compatible with the
3
following: DivX Ultra format, DivX files

84 En

.3gp MPEG4, H.264, Bluetooth WMA/WMV INCIDENTAL, SPECIAL, EXEMPLARY, OR English
Compatible video codec H.263 CONSEQUENTIAL DAMAGES (INCLUDING,
1 920 x 1 080 The Bluetooth® word mark and logos are Windows Media is either a registered trademark BUT NOT LIMITED TO, PROCUREMENT OF
Maximum resolution 30 fps registered trademarks owned by the Bluetooth or trademark of Microsoft Corporation in the SUBSTITUTE GOODS OR SERVICES; LOSS OF
Maximum frame rate SIG, Inc. and any use of such marks by PIONEER United States and/or other countries. USE, DATA, OR PROFITS; OR BUSINESS
.mkv MPEG4, H.264, CORPORATION is under license. Other • This product includes technology owned INTERRUPTION) HOWEVER CAUSED AND
Compatible video codec Xvid trademarks and trade names are those of their ON ANY THEORY OF LIABILITY, WHETHER
1 920 x 1 080 respective owners. by Microsoft Corporation and cannot be IN CONTRACT, STRICT LIABILITY, OR TORT
Maximum resolution 30 fps used or distributed without a license (INCLUDING NEGLIGENCE OR OTHERWISE)
Maximum frame rate Wi-Fi from Microsoft Licensing, Inc. ARISING IN ANY WAY OUT OF THE USE OF
.mov MPEG4, H.264, THIS SOFTWARE, EVEN IF ADVISED OF THE
Compatible video codec H.263 The Wi-Fi CERTIFIED™ Logo is a certification FLAC POSSIBILITY OF SUCH DAMAGE.
1 920 x 1 080 mark of Wi-Fi Alliance®.
Maximum resolution 30 fps Copyright © 2000-2009 Josh Coalson DivX
Maximum frame rate SDXC Copyright © 2011-2013 Xiph.Org
H.264 Foundation DivX® Home Theater Certified devices have been
.flv 1 920 x 1 080 SDXC Logo is a trademark of SD-3C, LLC. Redistribution and use in source and tested for high-quality DivX Home Theater video
Compatible video codec 30 fps binary forms, with or without modification, playback (including .avi, .divx). When you see
Maximum resolution are permitted provided that the following the DivX logo, you know you have the freedom
Maximum frame rate H.264 conditions are met: to play your favorite videos.
1 920 x 1 080 – Redistributions of source code must DivX®, DivX Certified® and associated logos are
.f4v 30 fps trademarks of DivX, LLC and are used under
Compatible video codec retain the above copyright notice, this list license.
Maximum resolution WMV/VC-1 of conditions and the following This DivX Certified® device has passed rigorous
Maximum frame rate 1 920 x 1 080 disclaimer. testing to ensure it plays DivX® video.
30 fps – Redistributions in binary form must To play purchased DivX movies, first register
.asf reproduce the above copyright notice, your device at vod.divx.com. Find your
Compatible video codec WMV/VC-1 this list of conditions and the following registration code in the DivX VOD section of
Maximum resolution 1 920 x 1 080 disclaimer in the documentation and/or your device setup menu.
Maximum frame rate 30 fps other materials provided with the
distribution. AAC
.wmv MPEG2, H.264 – Neither the name of the Xiph.org
Compatible video codec 1 920 x 1 080 Foundation nor the names of its AAC is short for Advanced Audio Coding
Maximum resolution 30 fps contributors may be used to endorse or and refers to an audio compression
Maximum frame rate promote products derived from this technology standard used with MPEG-2
software without specific prior written and MPEG-4. Several applications can be
.vob permission. used to encode AAC files, but file formats
Compatible video codec THIS SOFTWARE IS PROVIDED BY THE and extensions differ depending on the
Maximum resolution COPYRIGHT HOLDERS AND application which is used to encode. This
Maximum frame rate CONTRIBUTORS “AS IS” AND ANY EXPRESS unit plays back AAC files encoded by
OR IMPLIED WARRANTIES, INCLUDING, BUT iTunes.
NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND En 85
FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT,

Google™, Google Play, iPhone, iPod and Lightning Apple CarPlay • Optional Pioneer adapter cable
Android connecting your iPhone to this product.
Use of the Made for Apple badge means that Apple CarPlay is a trademark of Apple Inc.
Google, Google Play and Android are an accessory has been designed to connect Use of the Works with Apple badge means that Limitations:
trademarks of Google LLC. specifically to the Apple product(s) identified an accessory has been designed to work
in the badge, and has been certified by the specifically with the technology identified in the • Access to app-based connected content
Android Auto developer to meet Apple performance badge and has been certified by the developer will depend on the availability of cellular
standards. Apple is not responsible for the to meet Apple performance standards. and/or Wi-Fi network coverage for the
Android Auto is a trademark of Google LLC. operation of this device or its compliance with purpose of allowing your smartphone to
safety and regulatory standards. Siri connect to the Internet.
Detailed information Please note that the use of this accessory
regarding connected iPod with an Apple product may affect wireless Works with Siri through the microphone. • Service availability may be
devices performance. geographically limited to the region.
iPhone, iPod, iPod nano, iPod touch, and Using app-based Consult the connected content service
• Pioneer accepts no responsibility for data Lightning are trademarks of Apple Inc., connected content provider for additional information.
lost from an iPod, even if that data is lost registered in the U.S. and other countries.
while using this product. Please back up Android Auto function is only available for • Ability of this product to access
your iPod data regularly. App Store AVIC-Z910DAB/AVIC-Z810DAB. connected content is subject to change
without notice and could be affected by
• Do not leave the iPod in direct sunlight App Store is a service mark of Apple Inc. Important any of the following: compatibility issues
for extended amounts of time. Extended Requirements to access app-based with future firmware versions of
exposure to direct sunlight can result in iOS connected content services using this smartphone; compatibility issues with
iPod malfunction due to the resulting product: future versions of the connected content
high temperature. iOS is a trademark on which Cisco holds • Latest version of the Pioneer compatible application(s) for the smartphone;
the trademark right in the US and certain changes to or discontinuation of the
• Do not leave the iPod in any location with other countries. connected content application(s) for the connected Content application(s) or
high temperatures. smartphone, available from the service service by its provider.
iTunes provider, downloaded to your
• Firmly secure the iPod when driving. Do smartphone. • Pioneer is not liable for any issues that
not let the iPod fall onto the floor, where iTunes is a trademark of Apple Inc., • A current account with the content may arise from incorrect or flawed app-
it may become jammed under the brake registered in the U.S. and other service provider. based content.
or accelerator. countries. • Smartphone Data Plan.
Note: if the Data Plan for your • The content and functionality of the
• For details, refer to the iPod manuals. Apple Music smartphone does not provide for supported applications are the
unlimited data usage, additional charges responsibility of the App providers.
Apple Music is a trademark of Apple from your carrier may apply for accessing
Inc., registered in the U.S. and other app-based connected content via 3G, • In AppRadio Mode +, Apple CarPlay and
countries. EDGE and/or LTE (4G) networks. Android Auto, functionality through the
• Connection to the Internet via 3G, EDGE, product is limited while driving, with
LTE (4G) or Wi-Fi network. available functions determined by the
App providers.

• Availability of AppRadio Mode +, Apple
CarPlay and Android Auto functionalities
is determined by the App provider, and
not determined by Pioneer.

• AppRadio Mode +, Apple CarPlay and
Android Auto allow access to applications
other than those listed (subject to
limitations while driving), but the extent
to which content can be used is
determined by the App providers.

86 En

HDMI Notice regarding MP3 will become very hot, resulting in Maintaining the LCD screen English
file usage possible damage to the LCD screen.
The terms HDMI and HDMI High-Definition When not using this product, avoid • When removing dust from or cleaning
Multimedia Interface, and the HDMI Logo Supply of this product only conveys a exposing it to direct sunlight as much as the LCD screen, first turn this product off
are trademarks or registered trademarks of license for private, non-commercial use possible. and then wipe the screen with a soft dry
HDMI Licensing Administrator, Inc. in the and does not convey a license nor imply • The LCD screen should be used within cloth.
United States and other countries. any right to use this product in any the temperature ranges shown in
commercial (i.e. revenue-generating) real Specifications (page 87). • When wiping the LCD screen, take care
IVONA Text-to-Speech time broadcasting (terrestrial, satellite, • Do not use the LCD screen at not to scratch the surface. Do not use
cable and/or any other media), temperatures higher or lower than the harsh or abrasive chemical cleaners.
Notice regarding video broadcasting/streaming via internet, operating temperature range, because
viewing intranets and/or other networks or in other the LCD screen may not operate normally LED (light-emitting diode)
electronic content distribution systems, and could be damaged. backlight
Remember that use of this system for such as pay-audio or audio-on-demand • The LCD screen is exposed in order to
commercial or public viewing purposes applications. An independent license for increase its visibility within the vehicle. A light emitting diode is used inside the
may constitute an infringement on the such use is required. For details, please visit Please do not press strongly on it as this display to illuminate the LCD screen.
author’s rights as protected by the http://www.mp3licensing.com. may damage it. • At low temperatures, using the LED
Copyright Law. • Do not push the LCD screen with
Notice regarding open excessive force as this may scratch it. backlight may increase image lag and
Notice regarding DVD- source licenses • Never touch the LCD screen with degrade the image quality because of the
Video viewing anything besides your finger when characteristics of the LCD screen. Image
For details about the open source licenses operating the touch panel functions. The quality will improve with an increase in
This item incorporates copy protection for the functions that this product is LCD screen can scratch easily. temperature.
technology that is protected by U.S. equipped with, please visit • The product lifetime of the LED backlight
patents and other intellectual property http://www.oss-pioneer.com/car/ Liquid crystal display (LCD) is more than 10 000 hours. However, it
rights of Rovi Corporation. Reverse multimedia/ may decrease if used in high
engineering and disassembly are screen temperatures.
prohibited. Map coverage • If the LED backlight reaches the end of its
• If the LCD screen is near the vent of an air product lifetime, the screen will become
For details about the map coverage of this conditioner, make sure that air from the dimmer and the image will no longer be
product, refer to the information on our air conditioner is not blowing on it. Heat visible. In that case, please consult your
website. from the heater may break the LCD dealer or the nearest authorised Pioneer
screen, and cool air from the cooler may Service Station.
Using the LCD screen cause moisture to form inside this
correctly product, resulting in possible damage. Specifications

Handling the LCD screen • Small black dots or white dots (bright General
dots) may appear on the LCD screen. Rated power source:
• When the LCD screen is subjected to These are due to the characteristics of the
direct sunlight for a long period of time, it LCD screen and do not indicate a 14.4 V DC (12.0 V to 14.4 V allowable)
malfunction. Earthing system:

• The LCD screen will be difficult to see if it Negative type
is exposed to direct sunlight. Maximum current consumption:

• When using a mobile phone, keep the 10.0 A
aerial of the mobile phone away from the Dimensions (W × H × D):
LCD screen to prevent disruption of the
video in the form of disturbances such as (AVIC-Z910DAB/AVIC-Z810DAB)
spots or coloured stripes. Chassis DIN:

178 mm × 100 mm × 158 mm

En 87

Nose: Dimensions (W × H × D): Frequency: Slope:
188 mm × 118 mm × 24 mm 33 mm × 14.7 mm × 36 mm 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 -6 dB/oct, -12 dB/oct, -18 dB/oct, -24
Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 dB/oct, OFF
Chassis D: Weight: Hz
178 mm × 100 mm × 165 mm 73.7 g Subwoofer:
Slope: Frequency:
Nose: Display -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80
171 mm × 97 mm × 16 mm dB/oct, OFF Hz/100 Hz/125 Hz/160 Hz/200 Hz/250
Screen size/aspect ratio: Hz
(AVIC-Z710DAB/AVIC-Z610BT/AVIC- (AVIC-Z910DAB/AVIC-Z810DAB) Subwoofer/LPF: Slope:
Z7110DAB/AVIC-Z6110BT) 6.94 inch wide/16:9 (effective display Frequency: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24
Chassis DIN: area: 156.24 mm × 81.6 mm) 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 dB/oct, -30 dB/oct, -36 dB/oct, OFF
(AVIC-Z710DAB/AVIC-Z610BT/AVIC- Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 Gain:
178 mm × 100 mm × 158 mm Z7110DAB/AVIC-Z6110BT) Hz +10 dB to -24 dB (1 dB/step)
Nose: 6.2 inch wide/16:9 (effective display area: Slope: Phase: Normal/Reverse
137.52 mm × 77.232 mm) -6 dB/oct, -12 dB/oct, -18 dB/oct, -24
188 mm × 118 mm × 14 mm dB/oct, -30 dB/oct, -36 dB/oct, OFF Time alignment:
Chassis D: Pixels: Gain: 0 to 140 step (2.5 cm/step)
(AVIC-Z910DAB/AVIC-Z810DAB) +10 dB to -24 dB (1 dB/step)
178 mm × 100 mm × 165 mm 1 209 600 (2 520 × 480) Phase: Normal/Reverse Bass boost:
Nose: (AVIC-Z710DAB/AVIC-Z610BT/AVIC- Gain: +12 dB to 0 dB
Z7110DAB/AVIC-Z6110BT) Time alignment:
170 mm × 97 mm × 7 mm 1 152 000 (2 400 × 480) 0 to 140 step (2.5 cm/step) Speaker level:
Weight: +10 dB to -24 dB (1 dB/step)
Display method: Bass boost:
(AVIC-Z910DAB/AVIC-Z810DAB) TFT Active matrix driving Gain: +12 dB to 0 dB DVD drive
2.0 kg
(AVIC-Z710DAB/AVIC-Z610BT/AVIC- Colour system: Speaker level: System:
Z7110DAB/AVIC-Z6110BT) PAL/NTSC/PAL-M/PAL-N/SECAM +10 dB to -24 dB (1 dB/step) DVD-V, VCD, CD, MP3, WMA, AAC, DivX,
1.7 kg compatible MPEG player
NAND flash memory: <Network Mode>
16 GB Durable temperature range: HPF (High): Usable discs:
-20 ˚C to +80 ˚C (Power off ) DVD-VIDEO, VIDEO-CD, CD, CD-R, CD-
Navigation Frequency: RW, DVD-R, DVD-RW, DVD-R DL
Audio 1.25 kHz/1.6 kHz/2 kHz/2.5 kHz/3.15
GPS receiver: kHz/4 kHz/5 kHz/6.3 kHz/8 kHz/10 kHz/ Region number: 2
System: Maximum power output: 12.5 kHz Frequency response:
GPS L1C/Ac, SBAS L1C/A, GLONASS • 50 W × 4 ch/4 Ω
L1OF • 50 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for Slope: 5 Hz to 44 000 Hz (with DVD, at sampling
SPS (Standard Positioning Service) -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 frequency 96 kHz)
Reception system: subwoofer) dB/oct Signal-to-noise ratio:
72-channel multi-channel reception Continuous power output: 96 dB (1 kHz) (IEC-A network) (RCA level)
system HPF (Mid): Output level:
Reception frequency: 22 W × 4 (50 Hz to 15 kHz, 5 %THD, 4 Ω Frequency: Video:
1 575.42 MHz/1 602 MHz LOAD, Both Channels Driven) 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80
Sensitivity: Load impedance: Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 1.0 V p-p/75 Ω (±0.2 V)
-140 dBm (typ) 4 Ω (4 Ω to 8 Ω allowable) Hz Number of channels: 2 (stereo)
Position update frequency: Preout output level (max): 4.0 V Slope: MP3 decoding format:
Approx. once per second Equaliser (13-Band Graphic Equaliser): -6 dB/oct, -12 dB/oct, -18 dB/oct, -24
Frequency: dB/oct, OFF MPEG-1 & 2 & 2.5 Audio Layer 3
GPS aerial: WMA decoding format:
Aerial: 50 Hz/80 Hz/125 Hz/200 Hz/315 Hz/ LPF (Mid):
Micro strip flat aerial/right-handed 500 Hz/800 Hz/1.25 kHz/2 kHz/3.15 Frequency: Ver. 7, 8, 9 (2 ch audio) (Windows
helical polarization kHz/5 kHz/8 kHz/12.5 kHz 1.25 kHz/1.6 kHz/2 kHz/2.5 kHz/3.15 Media Player)
Aerial cable: Gain: ±12 dB kHz/4 kHz/5 kHz/6.3 kHz/8 kHz/10 kHz/ AAC decoding format:
3.55 m <Standard Mode> 12.5 kHz MPEG-4 AAC (iTunes encoded only):
HPF: .m4a (Ver. 11 and earlier)
88 En

DivX decoding format: WMV video decoding format: Output power: +16 dBm Max (2.4 GHz) English
Home Theater Ver. 3.11, 4.x, 5.x, 6.x: VC-1 SP/MP/AP, WMV 7/8 +4 dBm Max. (Power class 2) +13 dBm Max (5 GHz)
.avi, .divx NOTE
MPEG4 video decoding format: Frequency band: Specifications and design are subject to possible
MPEG video decoding format: Simple Profile, Advanced Simple Profile 2 400 MHz to 2 483.5 MHz modifications without notice due to
MPEG1: (except GMC) improvements.
.mpg, .mpeg, .dat FM tuner
MPEG-2 PS: SD Frequency range: En 89
.mpg, .mpeg (AVIC-Z910DAB/AVIC-Z810DAB)
MPEG4 part 2 (visual), MS-MPEG4 Ver. Compatible physical format: 87.5 MHz to 108 MHz
3: Usable sensitivity:
.avi Version 2.0
File system: FAT16, FAT32, NTFS 12 dBf (0.8 μV/75 Ω, mono, S/N: 30 dB)
USB Signal-to-noise ratio:
USB standard spec: <SD audio>
MP3 decoding format: 72 dB (IEC-A network)
USB 1.1, USB 2.0 high speed
Max current supply: 1.6 A MPEG-1/Layer 1, MPEG-1/Layer 2, MPEG- MW tuner
USB Class: 1/Layer 3, Frequency range:
MPEG-2/Layer 1, MPEG-2/Layer 2, MPEG-
MSC (Mass Storage Class), iPod (Audio 2/Layer 3, 531 kHz to 1 602 kHz (9 kHz)
Class, HID Class) MPEG-2.5/Layer 3 Usable sensitivity:
File system: FAT16, FAT32, NTFS WMA decoding format:
WMA 10 Std, WMA 10 Pro, WMA 9 28 μV (S/N: 20 dB)
<USB audio> Lossless Signal-to-noise ratio:
MP3 decoding format: AAC decoding format:
MPEG-2 AAC-LC, MPEG-4 AAC-LC 62 dB (IEC-A network)
MPEG-1/Layer-1, MPEG-1/Layer-2, MPEG- WAV signal format:
1/Layer-3 Linear PCM LW tuner
MPEG-2/Layer-1, MPEG-2/Layer-2, MPEG- FLAC signal format: Frequency range:
2/Layer-3 Ver. 1.3.0
MPEG-2.5/Layer-3 153 kHz to 281 kHz
WMA decoding format: <SD image> Usable sensitivity:
WMA 10 Std, WMA 10 Pro, WMA 9 JPEG decoding format:
Lossless 30 μV (S/N: 20 dB)
AAC decoding format: JPEG Signal-to-noise ratio:
MPEG-2 AAC-LC, MPEG-4 AAC-LC
FLAC signal format: <SD video> 62 dB (IEC-A network)
Ver. 1.3.0 H.264 video decoding format:
WAV signal format: DAB tuner
Linear PCM Base Line Profile, Main Profile, High (AVIC-Z910DAB/AVIC-Z810DAB/AVIC-
Profile Z710DAB/AVIC-Z7110DAB)
<USB image> WMV video decoding format: Frequency range (Band III):
JPEG decoding format: VC-1 SP/MP/AP, WMV 7/8
MPEG4 video decoding format: 174.928 MHz to 239.200 MHz (5A to 13F)
JPEG Simple Profile, Advanced Simple Profile Frequency range (L Band):
(except GMC)
<USB video> 1 452.960 MHz to 1 490.624 MHz (LA to
H.264 video decoding format: Bluetooth LW)
Version: Usable sensitivity:
Base Line Profile, Main Profile, High –100 dBm
Profile Bluetooth 4.1 Signal-to-noise ratio: 85 dB

Wi-Fi
Frequency channel:

1, 6, 11 ch (2.4 GHz)
149, 151, 155 ch (5 GHz)
Security:
WPA 2 (personal)
Output power:

© 2018 PIONEER CORPORATION. All rights reserved.

<CRB5072-A> EU