NBB75SI
Isolated BNC cable jack for panel mount, solder version
Neutrik's BNC cable jacks for panel mount offer a true 75 Ω
design for serial and digital (HD) signals. The machined brass
connector body provides an extremely rugged and non-abrasive
connection over long term use.
Features & Benefits • True 75 Ω design meets the stringent HD
• Gold plated center contact requirements
• Isolated panel mount (solves potential grounding • Grounded panel mount possible (remove isolation
problems and prevents common-mode influence with washer)
other connections conducted over the same panel
ground potential)
NBB75SI 1/3
Technical Information NBB75SI
BNC 75 Ω
Product female
Title HD, SDI, Video, AES/EBU, Composit, YUV, RGB, RGBH,
Connection Type RGBHV
Gender ≤ 3 mΩ (inner)
≤ 2 mΩ (outer)
Electrical 1,5 kVdc
75 Ω
Signal Type > 5 GΩ
<50 V
Contact resistance ≤1.050/>32 dB up to 1 GHz
Contact resistance ≤1.065/>30 dB up to 2 GHz
Dielectric strength ≤1.100/>26 dB up to 3 Ghz
Impedance
Insulation resistance < 25 N
Rated voltage > 1000 mating cycles
VSWR
Solder contacts
Mechanical Bayonett
Front mounting
Insertion force 12.7 mm
Lifetime
Wiresize
Wiring
Locking device
Mounting direction
Chassis shape
NBB75SI 2/3
Material Brass (CuZn39Pb3), 0.2 µm AuCo (Center contact)
PTFE
Contacts Polyacetal (POM) (Insulation Sheell)
Insert Optalloy®
Shell
Shell plating -30 °C to +85 °C
Environmental
Temperature range
NBB75SI 3/3