Behringer WASP DELUXE EN

Quick Start Guide

WASP DELUXE

Legendary Analog Synthesizer with Dual OSCs, VCF,
Multi-Mode VCF, 16-Voice Poly Chain and Eurorack Format

2 WASP DELUXE 1. Read these instructions. 15. The apparatus shall be connected
Important Safety 2. Keep these instructions. to a MAINS socket outlet with a
Instructions 3. Heed all warnings. protective earthing connection.
4. Follow all instructions. 16. Where the MAINS plug or an
Terminals marked with 5. Do not use this apparatus appliance coupler is used as the
this symbol carry near water. disconnect device, the disconnect
electrical current of 6. Clean only with dry cloth. device shall remain readily operable.
sufficient magnitude to constitute risk 7. Do not block any ventilation
of electric shock. Use only high-quality openings. Install in accordance with the 17. Correct disposal of
professional speaker cables with ¼" TS manufacturer’s instructions. this product: This
or twist-locking plugs pre-installed. 8. Do not install near any heat symbol indicates that
All other installation or modification sources such as radiators, heat registers, this product must not
should be performed only by stoves, or other apparatus (including be disposed of with
qualified personnel. amplifiers) that produce heat. household waste, according to the
This symbol, wherever it 9. Do not defeat the safety purpose WEEE Directive (2012/19/EU) and your
appears, alerts you to the of the polarized or grounding-type national law. This product should be
presence of uninsulated plug. A polarized plug has two blades taken to a collection center licensed for
dangerous voltage inside the enclosure with one wider than the other. the recycling of waste electrical and
- voltage that may be sufficient to A grounding-type plug has two blades electronic equipment (EEE).
constitute a risk of shock. and a third grounding prong. The wide The mishandling of this type of waste
This symbol, wherever it blade or the third prong are provided could have a possible negative impact
appears, alerts you to for your safety. If the provided plug on the environment and human health
important operating and does not fit into your outlet, consult due to potentially hazardous
maintenance instructions in the an electrician for replacement of the substances that are generally
accompanying literature. Please read obsolete outlet. associated with EEE. At the same time,
the manual. 10. Protect the power cord from being your cooperation in the correct disposal
Caution walked on or pinched particularly of this product will contribute to the
To reduce the risk of at plugs, convenience receptacles, efficient use of natural resources. For
electric shock, do not and the point where they exit from more information about where you can
remove the top cover (or the rear the apparatus. take your waste equipment for
section). No user serviceable parts inside. 11. Use only attachments/accessories recycling, please contact your local city
Refer servicing to qualified personnel. specified by the manufacturer. office, or your household waste
Caution collection service.
To reduce the risk of 12. Use only with 18. Do not install in a confined space,
fire or electric shock, do the cart, stand, such as a book case or similar unit.
not expose this appliance to rain and tripod, bracket, or 19. Do not place naked flame
moisture. The apparatus shall not table specified by sources, such as lighted candles,
be exposed to dripping or splashing the manufacturer, on the apparatus.
liquids and no objects filled with or sold with 20. Please keep the environmental
liquids, such as vases, shall be placed the apparatus. When a cart is used, aspects of battery disposal in mind.
on the apparatus. use caution when moving the cart/ Batteries must be disposed-of at a
Caution apparatus combination to avoid injury battery collection point.
These service instructions from tip-over. 21. Use this apparatus in tropical
are for use by qualified 13. Unplug this apparatus during and/or moderate climates.
service personnel only. To reduce lightning storms or when unused for
the risk of electric shock do not long periods of time. LEGAL DISCLAIMER
perform any servicing other than that 14. Refer all servicing to qualified Music Tribe accepts no liability for
contained in the operation instructions. service personnel. Servicing is required any loss which may be suffered by
Repairs have to be performed by when the apparatus has been damaged any person who relies either wholly
qualified service personnel. in any way, such as power supply cord or in part upon any description,
or plug is damaged, liquid has been photograph, or statement contained
spilled or objects have fallen into the herein. Technical specifications,
apparatus, the apparatus has been appearances and other information
exposed to rain or moisture, does not are subject to change without notice.
operate normally, or has been dropped.

All trademarks are the property Atención Quick Start Guide 3
of their respective owners. Midas, Para reducir el riesgo de
Klark Teknik, Lab Gruppen, Lake, descarga eléctrica, no contactos: dos polos y la puesta a
Tannoy, Turbosound, TC Electronic, quite la tapa (o la parte posterior). tierra. El contacto ancho y el tercer
TC Helicon, Behringer, Bugera, No hay piezas en el interior del equipo contacto, respectivamente, son los que
Auratone and Coolaudio are que puedan ser reparadas por el garantizan una mayor seguridad. Si el
trademarks or registered trademarks usuario. Si es necesario, póngase en enchufe suministrado con el equipo
of Music Tribe Global Brands Ltd. contacto con personal cualificado. no concuerda con la toma de corriente,
© Music Tribe Global Brands Ltd. Atención consulte con un electricista para
2019 All rights reserved. Para reducir el riesgo cambiar la toma de corriente obsoleta.
LIMITED WARRANTY de incendio o descarga 10. Coloque el cable de suministro de
For the applicable warranty terms and eléctrica, no exponga este aparato a la energía de manera que no pueda ser
conditions and additional information lluvia, humedad o alguna otra fuente pisado y que esté protegido de objetos
regarding Music Tribe’s Limited que pueda salpicar o derramar algún afilados. Asegúrese de que el cable de
Warranty, please see complete details líquido sobre el aparato. No coloque suministro de energía esté protegido,
online at musictribe.com/warranty. ningún tipo de recipiente para líquidos especialmente en la zona de la clavija y
sobre el aparato. en el punto donde sale del aparato.
Instrucciones de 11. Use únicamente los dispositivos
seguridad Atención o accesorios especificados por
Las instrucciones el fabricante.
Las terminales marcadas de servicio deben
con este símbolo llevarlas a cabo exclusivamente 12. Use
transportan corriente personal cualificado. Para evitar el únicamente la
eléctrica de magnitud suficiente como riesgo de una descarga eléctrica, carretilla,
para constituir un riesgo de descarga no realice reparaciones que no se plataforma,
eléctrica. Utilice solo cables de altavoz encuentren descritas en el manual de trípode, soporte o
profesionales y de alta calidad con operaciones. Las reparaciones deben mesa especificados
conectores TS de 6,3 mm o de bayoneta ser realizadas exclusivamente por por el fabricante o suministrados junto
prefijados. Cualquier otra instalación o personal cualificado. con el equipo. Al transportar el equipo,
modificación debe ser realizada 1. Lea las instrucciones. tenga cuidado para evitar daños y
únicamente por un técnico cualificado. 2. Conserve estas instrucciones. caídas al tropezar con algún obstáculo.
Este símbolo, siempre que 3. Preste atención a todas 13. Desenchufe el equipo durante
aparece, le advierte de la las advertencias. tormentas o si no va a utilizarlo durante
presencia de voltaje 4. Siga todas las instrucciones. un periodo largo.
peligroso sin aislar dentro de la caja; 5. No use este aparato cerca 14. Confíe las reparaciones
este voltaje puede ser suficiente para del agua. únicamente a servicios técnicos
constituir un riesgo de descarga. 6. Limpie este aparato con un cualificados. La unidad requiere
Este símbolo, siempre que paño seco. mantenimiento siempre que haya
aparece, le advierte sobre 7. No bloquee las aberturas sufrido algún daño, si el cable de
instrucciones operativas y de ventilación. Instale el equipo suministro de energía o el enchufe
de mantenimiento que aparecen en la de acuerdo con las instrucciones presentaran daños, se hubiera
documentación adjunta. Por favor, del fabricante. derramado un líquido o hubieran caído
lea el manual. 8. No instale este equipo cerca de objetos dentro del equipo, si el aparato
fuentes de calor tales como radiadores, hubiera estado expuesto a la humedad
acumuladores de calor, estufas u otros o la lluvia, si ha dejado de funcionar de
aparatos (incluyendo amplificadores) manera normal o si ha sufrido algún
que puedan producir calor. golpe o caída.
9. No elimine o deshabilite nunca 15. Al conectar la unidad a la toma de
la conexión a tierra del aparato o del corriente eléctrica asegúrese de que
cable de alimentación de corriente. la conexión disponga de una unión
Un enchufe polarizado tiene dos polos, a tierra.
uno de los cuales tiene un contacto 16. Si el enchufe o conector
más ancho que el otro. Una clavija de red sirve como único medio
con puesta a tierra dispone de tres de desconexión, éste debe ser
accesible fácilmente.

4 WASP DELUXE Tannoy, Turbosound, TC Electronic, L’intérieur de l’appareil ne possède
TC Helicon, Behringer, Bugera, aucun élément réparable par
17. Cómo debe Auratone y Coolaudio son marcas l’utilisateur. Laisser toute réparation à
deshacerse de este comerciales o marcas registradas un professionnel qualifié.
aparato: Este símbolo de Music Tribe Global Brands Ltd.
indica que este aparato © Music Tribe Global Brands Ltd. Attention
no debe ser tratado 2019 Reservados todos los derechos. Pour réduire les risques
como basura orgánica, según lo GARANTÍA LIMITADA de feu et de choc
indicado en la Directiva WEEE (2012/19/ Si quiere conocer los detalles y électrique, n’exposez pas cet appareil
EU) y a las normativas aplicables en su condiciones aplicables de la garantía à la pluie, à la moisissure, aux gouttes
país. En lugar de ello deberá llevarlo al así como información adicional sobre ou aux éclaboussures. Ne posez pas
punto limpio más cercano para el la Garantía limitada de Music Tribe, de récipient contenant un liquide sur
reciclaje de sus elementos eléctricos / consulte online toda la información en l’appareil (un vase par exemple).
electrónicos (EEE). Al hacer esto estará la web musictribe.com/warranty.
ayudando a prevenir las posibles Attention
consecuencias negativas para el medio Consignes de sécurité Ces consignes de
ambiente y la salud que podrían ser sécurité et d’entretien
provocadas por una gestión inadecuada Les points repérés par ce sont destinées à un personnel
de este tipo de aparatos. Además, symbole portent une qualifié. Pour éviter tout risque de
el reciclaje de materiales ayudará a tension électrique choc électrique, n’effectuez aucune
conservar los recursos naturales. Para suffisante pour constituer un risque réparation sur l’appareil qui ne soit
más información acerca del reciclaje de d’électrocution. Utilisez uniquement décrite par le manuel d’utilisation.
este aparato, póngase en contacto con des câbles d’enceintes professionnels Les éventuelles réparations doivent
el Ayuntamiento de su ciudad o con el de haute qualité avec fiches Jack mono être effectuées uniquement par un
punto limpio local. 6,35 mm ou fiches à verrouillages déjà technicien spécialisé.
18. No instale esta unidad en un installées. Toute autre installation ou 1. Lisez ces consignes.
espacio muy reducido, tal como modification doit être effectuée 2. Conservez ces consignes.
encastrada en una librería o similar. uniquement par un personnel qualifié. 3. Respectez tous les avertissements.
19. No coloque objetos con Ce symbole avertit de la 4. Respectez toutes les
llama, como una vela encendida, présence d’une tension consignes d’utilisation.
sobre este aparato. dangereuse et non isolée à 5. N’utilisez jamais l’appareil à
20. Tenga presentes todas las l’intérieur de l’appareil - elle peut proximité d’un liquide.
advertencias relativas al reciclaje provoquer des chocs électriques. 6. Nettoyez l’appareil avec un
y correcta eliminación de las pilas. Attention chiffon sec.
Las pilas deben ser siempre eliminadas Ce symbol signale les 7. Veillez à ne pas empêcher la
en un punto limpio y nunca con el resto consignes d’utilisation bonne ventilation de l’appareil via ses
de la basura orgánica. et d’entre ! Tien importantes dans ouïes de ventilation. Respectez les
21. Use este aparato en rangos de la documentation fournie. Lisez les consignes du fabricant concernant
temperatura moderados y/o tropicales. consignes de sécurité du manuel l’installation de l’appareil.
d’utilisation de l’appareil. 8. Ne placez pas l’appareil à
NEGACIÓN LEGAL Attention proximité d’une source de chaleur telle
Music Tribe no admite ningún tipo Pour éviter tout risque qu’un chauffage, une cuisinière ou tout
de responsabilidad por cualquier de choc électrique, appareil dégageant de la chaleur (y
daño o pérdida que pudiera sufrir ne pas ouvrir le capot de l’appareil compris un ampli de puissance).
cualquier persona por confiar total ni démonter le panneau arrière. 9. Ne supprimez jamais la sécurité
o parcialmente en la descripciones, des prises bipolaires ou des prises
fotografías o afirmaciones terre. Les prises bipolaires possèdent
contenidas en este documento. deux contacts de largeur différente.
Las especificaciones técnicas, Le plus large est le contact de sécurité.
imágenes y otras informaciones Les prises terre possèdent deux
contenidas en este documento están contacts plus une mise à la terre
sujetas a modificaciones sin previo servant de sécurité. Si la prise du bloc
aviso. Todas las marcas comerciales d’alimentation ou du cordon d’ali-
que aparecen aquí son propiedad mentation fourni ne correspond pas à
de sus respectivos dueños. Midas, celles de votre installation électrique,
Klark Teknik, Lab Gruppen, Lake,

faites appel à un électricien pour 17. Mise au rebut Quick Start Guide 5
effectuer le changement de prise. appropriée de ce
10. Installez le cordon d’alimentation produit: Ce symbole Lab Gruppen, Lake, Tannoy,
de telle façon que personne ne puisse indique qu’en accord Turbosound, TC Electronic, TC Helicon,
marcher dessus et qu’il soit protégé avec la directive DEEE Behringer, Bugera, Auratone et
d’arêtes coupantes. Assurez-vous (2012/19/EU) et les lois en vigueur dans Coolaudio sont des marques ou
que le cordon d’alimentation est votre pays, ce produit ne doit pas être marques déposées de Music Tribe
suffisamment protégé, notamment jeté avec les déchets ménagers. Global Brands Ltd. © Music Tribe Global
au niveau de sa prise électrique et Ce produit doit être déposé dans un Brands Ltd. 2019 Tous droits réservés.
de l’endroit où il est relié à l’appareil; point de collecte agréé pour le GARANTIE LIMITÉE
cela est également valable pour une recyclage des déchets d’équipements Pour connaître les termes et conditions
éventuelle rallonge électrique. électriques et électroniques (EEE). de garantie applicables, ainsi que
11. Utilisez exclusivement Une mauvaise manipulation de ce type les informations supplémentaires et
des accessoires et des appareils de déchets pourrait avoir un impact détaillées sur la Garantie Limitée de
supplémentaires recommandés par négatif sur l’environnement et la santé Music Tribe, consultez le site Internet
le fabricant. à cause des substances potentiellement musictribe.com/warranty.
dangereuses généralement associées à
12. Utilisez ces équipements. En même temps, Wichtige
exclusivement des votre coopération dans la mise au rebut Sicherheitshinweise
chariots, des de ce produit contribuera à l’utilisation
diables, efficace des ressources naturelles. Vorsicht
des présentoirs, Pour plus d’informations sur l’endroit Die mit dem Symbol
des pieds et des où vous pouvez déposer vos déchets markierten Anschlüsse
surfaces de travail recommandés par le d’équipements pour le recyclage, führen so viel Spannung, dass die
fabricant ou livrés avec le produit. veuillez contacter votre mairie ou votre Gefahr eines Stromschlags besteht.
Déplacez précautionneusement tout centre local de collecte des déchets. Verwenden Sie nur hochwertige,
chariot ou diable chargé pour éviter 18. N’installez pas l’appareil dans un professionelle Lautsprecherkabel
d’éventuelles blessures en cas de chute. espace confiné tel qu’une bibliothèque mit vorinstallierten 6,35 mm
13. Débranchez l’appareil de la ou meuble similaire. MONO-Klinkensteckern oder
tension secteur en cas d’orage ou si 19. Ne placez jamais d’objets Lautsprecherstecker mit
l’appareil reste inutilisé pendant une enflammés, tels que des bougies Drehverriegelung. Alle anderen
longue période de temps. allumées, sur l’appareil. Installationen oder Modifikationen
14. Les travaux d’entretien de 20. Gardez à l’esprit l’impact sollten nur von qualifiziertem
l’appareil doivent être effectués environnemental lorsque vous mettez Fachpersonal ausgeführt werden.
uniquement par du personnel qualifié. des piles au rebus. Les piles usées Achtung
Aucun entretien n’est nécessaire sauf si doivent être déposées dans un point de Um eine Gefährdung
l’appareil est endommagé de quelque collecte adapté. durch Stromschlag
façon que ce soit (dommages sur le 21. Utilisez l’appareil dans un climat auszuschließen, darf die
cordon d’alimentation ou la prise par tropical et/ou modéré. Geräteabdeckung bzw.
exemple), si un liquide ou un objet Geräterückwand nicht abgenommen
a pénétré à l’intérieur du châssis, si DÉNI LÉGAL werden. Im Innern des Geräts befinden
l’appareil a été exposé à la pluie ou Music Tribe ne peut être tenu pour sich keine vom Benutzer reparierbaren
à l’humidité, s’il ne fonctionne pas responsable pour toute perte pouvant Teile. Reparaturarbeiten dürfen
correctement ou à la suite d’une chute. être subie par toute personne se nur von qualifiziertem Personal
15. L’appareil doit être connecté à une fiant en partie ou en totalité à ausgeführt werden.
prise secteur dotée d’une protection toute description, photographie
par mise à la terre. ou affirmation contenue dans ce
16. La prise électrique ou la prise document. Les caractéristiques,
IEC de tout appareil dénué de bouton l’apparence et d’autres informations
marche/arrêt doit rester accessible peuvent faire l’objet de modifications
en permanence. sans notification. Toutes les marques
appartiennent à leurs propriétaires
respectifs. Midas, Klark Teknik,

6 WASP DELUXE entsprechend ausgetauscht wird. zusammen mit Ihren Haushaltsabfällen
10. Verlegen Sie das Netzkabel so, zu entsorgen. Dieses Produkt sollte bei
Achtung dass es vor Tritten und scharfen Kanten einer autorisierten Sammelstelle für
Um eine Gefährdung geschützt ist und nicht beschädigt Recycling elektrischer und
durch Feuer bzw. werden kann. Achten Sie bitte elektronischer Geräte (EEE) abgegeben
Stromschlag auszuschließen, darf insbesondere im Bereich der Stecker, werden. Wegen bedenklicher
dieses Gerät weder Regen oder Verlängerungskabel und an der Stelle, Substanzen, die generell mit
Feuchtigkeit ausgesetzt werden an der das Netzkabel das Gerät verlässt, elektrischen und elektronischen
noch sollten Spritzwasser oder auf ausreichenden Schutz. Geräten in Verbindung stehen, könnte
tropfende Flüssigkeiten in das Gerät 11. Das Gerät muss jederzeit mit eine unsachgemäße Behandlung dieser
gelangen können. Stellen Sie keine intaktem Schutzleiter an das Stromnetz Abfallart eine negative Auswirkung auf
mit Flüssigkeit gefüllten Gegenstände, angeschlossen sein. Umwelt und Gesundheit haben.
wie z. B. Vasen, auf das Gerät. 12. Sollte der Hauptnetzstecker Gleichzeitig gewährleistet Ihr Beitrag
Achtung oder eine Gerätesteckdose die zur richtigen Entsorgung dieses
Die Service-Hinweise sind Funktionseinheit zum Abschalten sein, Produkts die effektive Nutzung
nur durch qualifiziertes muss diese immer zugänglich sein. natürlicher Ressourcen. Für weitere
Personal zu befolgen. Um eine 13. Verwenden Sie nur Zusatzgeräte/ Informationen zur Entsorgung Ihrer
Gefährdung durch Stromschlag zu Zubehörteile, die laut Hersteller Geräte bei einer Recycling-Stelle
vermeiden, führen Sie bitte keinerlei geeignet sind. nehmen Sie bitte Kontakt zum
Reparaturen an dem Gerät durch, zuständigen städtischen Büro,
die nicht in der Bedienungsanleitung 14. Verwenden Entsorgungsamt oder zu Ihrem
beschrieben sind. Reparaturen Sie nur Wagen, Haushaltsabfallentsorger auf.
sind nur von qualifiziertem Standvorrich- 18. Installieren Sie das Gerät nicht
Fachpersonal durchzuführen. tungen, Stative, in einer beengten Umgebung, zum
1. Lesen Sie diese Hinweise. Halter oder Tische, Beispiel Bücherregal oder ähnliches.
2. Bewahren Sie diese Hinweise auf. die vom Hersteller 19. Stellen Sie keine Gegenstände mit
3. Beachten Sie alle Warnhinweise. benannt oder im Lieferumfang des offenen Flammen, etwa brennende
4. Befolgen Sie alle Geräts enthalten sind. Falls Sie einen Kerzen, auf das Gerät.
Bedienungshinweise. Wagen benutzen, seien Sie vorsichtig 20. Beachten Sie bei der Entsorgung
5. Betreiben Sie das Gerät nicht in beim Bewegen der von Batterien den Umweltschutz-
der Nähe von Wasser. Wagen-Gerätkombination, Aspekt. Batterien müssen bei einer
6. Reinigen Sie das Gerät mit einem um Verletzungen durch Stolpern Batterie-Sammelstelle entsorgt
trockenen Tuch. zu vermeiden. werden.
7. Blockieren Sie nicht die 15. Ziehen Sie den Netzstecker bei 21. Verwenden Sie das Gerät in
Belüftungsschlitze. Beachten Gewitter oder wenn Sie das Gerät tropischen und/oder gemäßigten
Sie beim Einbau des Gerätes die längere Zeit nicht benutzen. Klimazonen.
Herstellerhinweise. 16. Lassen Sie alle Wartungsarbeiten
8. Stellen Sie das Gerät nicht in der nur von qualifiziertem Service- HAFTUNGSAUSSCHLUSS
Nähe von Wärmequellen auf. Solche Personal ausführen. Eine Wartung Music Tribe übernimmt keine Haftung
Wärmequellen sind z. B. Heizkörper, ist notwendig, wenn das Gerät in für Verluste, die Personen entstanden
Herde oder andere Wärme erzeugende irgendeiner Weise beschädigt wurde sind, die sich ganz oder teilweise auf
Geräte (auch Verstärker). (z. B. Beschädigung des Netzkabels hier enthaltene Beschreibungen,
9. Entfernen Sie in keinem Fall oder Steckers), Gegenstände oder Fotos oder Aussagen verlassen haben.
die Sicherheitsvorrichtung von Flüssigkeit in das Geräteinnere gelangt Technische Daten, Erscheinungsbild
Zweipol- oder geerdeten Steckern. Ein sind, das Gerät Regen oder Feuchtigkeit und andere Informationen können
Zweipolstecker hat zwei unterschiedlich ausgesetzt wurde, das Gerät nicht ohne vorherige Ankündigung
breite Steckkontakte. Ein geerdeter ordnungsgemäß funktioniert oder auf geändert werden. Alle Warenzeichen
Stecker hat zwei Steckkontakte den Boden gefallen ist. sind Eigentum der jeweiligen Inhaber.
und einen dritten Erdungskontakt. 17. Korrekte Midas, Klark Teknik, Lab Gruppen,
Der breitere Steckkontakt oder der Entsorgung dieses Lake, Tannoy, Turbosound,
zusätzliche Erdungskontakt dient Produkts: Dieses Symbol TC Electronic, TC Helicon,
Ihrer Sicherheit. Falls das mitgelieferte weist darauf hin, das Behringer, Bugera, Auratone und
Steckerformat nicht zu Ihrer Steckdose Produkt entsprechend Coolaudio sind Warenzeichen oder
passt, wenden Sie sich bitte an der WEEE Direktive (2012/19/EU) und
einen Elektriker, damit die Steckdose der jeweiligen nationalen Gesetze nicht

eingetragene Warenzeichen der exposto à chuva nem à humidade. Quick Start Guide 7
Music Tribe Global Brands Ltd. Além disso, não deve ser sujeito a
© Music Tribe Global Brands Ltd. salpicos, nem devem ser colocados em Verifique particularmente nas fichas,
2019 Alle Rechte vorbehalten. cima do aparelho objectos contendo nos receptáculos e no ponto em que o
BESCHRÄNKTE GARANTIE líquidos, tais como jarras. cabo sai do aparelho.
Die geltenden Garantiebedingungen 11. O aparelho tem de estar sempre
und zusätzliche Informationen Atenção conectado à rede eléctrica com o
bezüglich der von Music Tribe Estas instruções de condutor de protecção intacto.
gewährten beschränkten operação devem ser 12. Se utilizar uma ficha de
Garantie finden Sie online unter utilizadas, em exclusivo, por técnicos rede principal ou uma tomada de
musictribe.com/warranty. de assistência qualificados. Para evitar aparelhos para desligar a unidade
choques eléctricos não proceda a de funcionamento, esta deve estar
Instruções de reparações ou intervenções, que sempre acessível.
Segurança Importantes não as indicadas nas instruções 13. Utilize apenas ligações/acessórios
de operação, salvo se possuir as especificados pelo fabricante.
Aviso! qualifi-cações necessárias. Para evitar
Terminais marcados choques eléctricos não proceda a 14. Utilize apenas
com o símbolo carregam reparações ou intervenções, que com o carrinho,
corrente elétrica de magnitude não as indicadas nas instruções de estrutura, tripé,
suficiente para constituir um risco de operação. Só o deverá fazer se possuir suporte, ou mesa
choque elétrico. Use apenas cabos as qualificações necessárias. especificados pelo
de alto-falantes de alta qualidade 1. Leia estas instruções. fabricante ou
com plugues TS de ¼" ou plugues 2. Guarde estas instruções. vendidos com o dispositivo.
com trava de torção pré-instalados. 3. Preste atenção a todos os avisos. Quando utilizar um carrinho, tenha
Todas as outras instalações e 4. Siga todas as instruções. cuidado ao mover o conjunto carrinho/
modificações devem ser efetuadas por 5. Não utilize este dispositivo perto dispositivo para evitar danos provocados
pessoas qualificadas. de água. pela terpidação.
Este símbolo, onde quer 6. Limpe apenas com um pano seco. 15. Desligue este dispositivo durante
que o encontre, alerta-o 7. Não obstrua as entradas de as trovoadas ou quando não for
para a leitura das ventilação. Instale de acordo com as utilizado durante longos períodos
instruções de manuseamento que instruções do fabricante. de tempo.
acompanham o equipamento. Por favor 8. Não instale perto de quaisquer 16. Qualquer tipo de reparação
leia o manual de instruções. fontes de calor tais como radiadores, deve ser sempre efectuado por
Atenção bocas de ar quente, fogões de sala pessoal qualificado. É necessária uma
De forma a diminuir ou outros aparelhos (incluindo reparação sempre que a unidade tiver
o risco de choque amplificadores) que produzam calor. sido de alguma forma danificada,
eléctrico, não remover a cobertura 9. Não anule o objectivo de como por exemplo: no caso do cabo de
(ou a secção de trás). Não existem peças segurança das fichas polarizadas ou alimentação ou ficha se encontrarem
substituíveis por parte do utilizador no do tipo de ligação à terra. Uma ficha danificados; na eventualidade de
seu interior. Para esse efeito recorrer a polarizada dispõe de duas palhetas líquido ter sido derramado ou objectos
um técnico qualificado. sendo uma mais larga do que a outra. terem caído para dentro do dispositivo;
Atenção Uma ficha do tipo ligação à terra dispõe no caso da unidade ter estado exposta
Para reduzir o risco de de duas palhetas e um terceiro dente à chuva ou à humidade; se esta
incêndios ou choques de ligação à terra. A palheta larga ou não funcionar normalmente, ou se
eléctricos o aparelho não deve ser o terceiro dente são fornecidos para tiver caído.
sua segurança. Se a ficha fornecida 17. Correcta eliminação
não encaixar na sua tomada, consulte deste produto: este
um electricista para a substituição da símbolo indica que o
tomada obsoleta. produto não deve ser
10. Proteja o cabo de alimentação de eliminado juntamente
pisadelas ou apertos, especialmente com os resíduos domésticos, segundo a
nas fichas, extensões, e no local de Directiva REEE (2012/19/EU) e a legislação
saída da unidade. Certifique-se de nacional. Este produto deverá ser levado
que o cabo eléctrico está protegido. para um centro de recolha licenciado para
a reciclagem de resíduos de
equipamentos eléctricos e electrónicos
(EEE). O tratamento incorrecto deste tipo
de resíduos pode ter um eventual

8 WASP DELUXE GARANTIA LIMITADA
Para obter os termos de garantia
impacto negativo no ambiente e na aplicáveis e condições e informações
saúde humana devido a substâncias adicionais a respeito da garantia
potencialmente perigosas que estão limitada do Music Tribe, favor verificar
geralmente associadas aos EEE. Ao detalhes na íntegra através do website
mesmo tempo, a sua colaboração para a musictribe.com/warranty.
eliminação correcta deste produto irá
contribuir para a utilização eficiente dos
recursos naturais. Para mais informação
acerca dos locais onde poderá deixar o
seu equipamento usado para reciclagem,
é favor contactar os serviços municipais
locais, a entidade de gestão de resíduos
ou os serviços de recolha de
resíduos domésticos.
18. Não instale em lugares
confinados, tais como estantes ou
unidades similares.
19. Não coloque fontes de
chama, tais como velas acesas,
sobre o aparelho.
20. Favor, obedecer os aspectos
ambientais de descarte de bateria.
Baterias devem ser descartadas em um
ponto de coletas de baterias.
21. Use este aparelho em climas
tropicais e/ou moderados.

LEGAL RENUNCIANTE
O Music Tribe não se responsabiliza
por perda alguma que possa ser
sofrida por qualquer pessoa que
dependa, seja de maneira completa
ou parcial, de qualquer descrição,
fotografia, ou declaração aqui
contidas. Dados técnicos, aparências
e outras informações estão sujeitas
a modificações sem aviso prévio.
Todas as marcas são propriedade
de seus respectivos donos. Midas,
Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic,
TC Helicon, Behringer, Bugera, Auratone
e Coolaudio são marcas ou marcas
registradas do Music Tribe Global Brands
Ltd. © Music Tribe Global Brands Ltd.
2019 Todos direitos reservados.

Quick Start Guide 9

10 WASP DELUXE

WASP DELUXE Hook-up

(EN) Step 1: Hook-Up

(EN)  Studio System

MIDI Keyboard MIDI OUT

USB B MIDI IN

USB A USB B Power
USB A Audio Interface Adaptor
Headphones
Desktop Computer Studio Monitors

Quick Start Guide 11
(EN)  Band / Practice System

MIDI IN MIDI Keyboard
MIDI OUT

Footswitch
Expression Pedal

Power Headphones
Adaptor

Keyboard Ampli er

12 WASP DELUXE

WASP DELUXE Controls

(EN) Step 2: Controls

(4) (5) (6) (13) (14) (16) (17)
(18)
(1)
(2) (31)
(3)

(10) (7) (8) (9) (11) (12) (15)

(19) (20) (21) (26) (28) (29) (30)

(22)

(23) (24) (25) (32) (33)
(27)

Quick Start Guide 13

(34) (35) (36) (37)

12 34
56 78
9 10 11 12
13 14 15 16

14 WASP DELUXE

WASP DELUXE Controls

(EN) Step 2: Controls KEYBOARD Section (11) EXT. knob allows you to
(1) BEND knob shifts the keyboard blend in audio signals from
the EXT. AUDIO jack with the
pitch up (clockwise) or down oscillator signals.
(counterclockwise).
(2) TUNE knob allows fine adjustment CONTROL OSC. Section
of the keyboard pitch. This section offers an oscillator that does
(3) GLIDE controls the rate of change not produce sound itself, but which can
from one note to the other. be used to control the primary oscillators
Turning the knob clockwise slows and the filter.
down the shift to the next pitch. (12) NOISE signal knob produces
OSCILLATORS Section
(4) FT knob for the upper oscillator white noise that can be mixed
sets the oscillator’s pitch. in to create percussion sounds.
(5) WIDTH % knob controls (13) FREQUENCY knob adjusts the
the width of the oscillator’s sound. speed of the control oscillator.
(6) WAVEFORM knob controls the (14) PITCH MOD. varies the pitch
shape of the waveform for the difference between the
upper oscillator. In the OFF setting, primary oscillators to create
the waveform is left as an additional modulation effects.
unaltered sine wave. (15) WAVEFORM switch offers
The second-from-left setting six different settings:
imposes a “sawtooth” waveform, sine was, rising sawtooth,
while the next setting over falling sawtooth, square wave,
creates a “square” waveform. NOISE and RND. (random).
The ENH setting acts as an FILTER Section
enhancer to add punch, bit and (16) FREQ. knob sets the filter
clarity to the oscillator’s tone. cutoff frequency.
(7) FT knob for the lower oscillator (17) Q knob controls the filter
sets the oscillator’s pitch. width (for bandpass and
(8) PITCH knob adjusts the pitch notch filter) or the filter slope
of the second oscillator against (hi- and lo-pass filters).
the pitch of the upper oscillator (18) FILTER knob offers four
to create modulation effects. filter options: LO (lo-pass),
(9) WAVEFORM knob controls BAND (bandpass),
the shape of the waveform NOTCH and HI (hi-pass).
for the lower oscillator. In the ENVELOPE GENERATORS
OFF setting, the waveform is Section
left as an unaltered sine wave. This section has two sub-sections:
The second-from-left setting VCA ENV. (controls the envelope for
imposes a “sawtooth” waveform, the oscillators) and CONTROL ENV.
while the next setting over (which controls the filter envelopes).
creates a “square” waveform. VCA ENV.
The ENH setting acts as an (19) ATTACK knob controls the speed
enhancer to add punch, bit and of the note onset.
clarity to the oscillator’s tone. (20) DECAY knob controls how quickly
(10) MIX section controls the relative the note volume decays while the
blend of the upper and lower finger remains on the keyboard
oscillator (OSC 1/OSC 2 knobs). and then controls the fading
out of the note after the finger
is removed from the keyboard.

Quick Start Guide 15

(21) SUSTAIN LEVEL/REPEAT knob (30) MIDI THRU uses a 5-pin DIN (35) MIDI CHANNEL has 4 switches
controls the baseline volume jack is used to pass through MIDI that allow you to set the
of the note while the finger data received at the MIDI INPUT. MIDI Channel number from 1
remains on the keyboard. This data will commonly be sent to 16 (see the table on page 13).
When set full counter-clockwise, to another MODEL D synthesizer The MIDI channel can also
the note repeats and the ATTACK to run a Poly Chain or to a drum be changed using MIDI
and DECAY knobs then control machine assigned to a different SysEx commands, as shown
the speed of the repeat. MIDI Channel. in the MIDI SysEx tables later
in this manual. (This method
(22) HOLD switch sustains the (31) EXT. AUDIO input connects is used when the WASP DELUXE
note indefinitely at the point any external line-level audio is housed in a Eurorack, and these
of the envelope when the source to this 3.5 mm input. switches are no longer present.)
switch is activated. If nothing is connected here,
then the main audio output Power Section
CONTROL ENV. is internally connected to this (36) POWER switch turns the unit
(23) ATTACK knob controls the speed external input.
on and off.
of the filter onset. (32) POWER LED lights up to indicate (37) DC INPUT connects to the
(24) DECAY knob controls how quickly the unit has been powered on.
supplied 12V DC power adapter.
the filter cutoff frequency decays. (33) MAIN AUDIO uses a 3.5 mm tThe power adapter can be
(25) DELAY/REPEAT knob delays the TRS connection to output plugged into an AC outlet capable
the main audio output. of supplying from 100V to 240V
onset of the filter attack by up Typically it can be patched to the at 50 Hz/60 Hz. Use only the power
to 1 second. audio input of another WASP adapter supplied.
OUTPUT Section DELUXE or to the audio inputs
(26) VOLUME knob controls the final of other modular synthesizer
volume at the MAIN AUDIO and equipment. If you are using the
MAIN OUT jacks. WASP DELUXE in a Eurorack,
(27) PHONES knob controls the then this is the main output,
headphone volume at the 1/8" TRS as the rear panel output
jack immediately above the knob. connectors are not used.
MIDI Section
(28) USB PORT allows connection Rear Panel
to a computer over a USB type B (34) MAIN OUT uses ¼" TRS outputs
connection. The WASP DELUXE will
show up as a class-compliant USB to connect to the inputs of your
MIDI device, capable of supporting external equipment as follows
MIDI in and out. (note that they are both Mono,
• USB MIDI IN - accepts incoming and not left/right):
MIDI data from an application. • LOW - this instrument-level
• USB MIDI OUT - sends MIDI data mono output can connect to the
to an application. instrument-level inputs of guitar
(29) MIDI IN receives MIDI data amplifiers or mixers for example.
from an external source • HIGH - this line-level mono output
over a 5-pin DIN connector. can connect to the line-level inputs
This will commonly be a MIDI of mixers, keyboard amplifiers,
keyboard, an external hardware or powered speakers for example.
sequencer, a computer equipped
with a MIDI interface, etc.

16 WASP DELUXE

WASP DELUXE Getting started

(EN) Step 3: Getting OVERVIEW WARM UP TIME
started This ’getting started‘ guide We recommend leaving 15
will help you set up the WASP minutes or more time for the
DELUXE analog synthesizer and WASP DELUXE to warm up before
briefly introduce its capabilities. recording or live performance.
CONNECTION (Longer if it has been brought
To connect the WASP DELUXE in from the cold.) This will allow
to your system, please consult the precision analog circuits
the connection guide earlier time to reach their normal
in this document. operating temperature and
SOFTWARE SETUP tuned performance.
The WASP DELUXE is a USB Class OSCILLATORS SECTION and
Compliant MIDI device, and so no MIX CONTROLS
driver installation is required. The WASP DELUXE has two
The WASP DELUXE does not require oscillators, an internal Noise
any additional drivers to work with generator, and an external source
Windows and MacOS. input. Each of these, and any
HARDWARE SETUP combination, are used by the
Make all the connections WASP DELUXE to generate sound.
in your system. Use the rear The MIX controls allow you
panel MIDI switches to set to adjust the volume of each
the WASP DELUXE to a unique of these sources to create an
MIDI channel in your system. overall mix. Start by adjusting
Connect an external MIDI keyboard the volume control of Oscillator 1,
directly to the WASP DELUXE MIDI while turning the other sources
IN 5-pin DIN type input. all the way down. In the OUTPUT
Apply power to the WASP DELUXE section, adjust the main volume.
using the supplied power adapter Now, if you play a note on your
only. Ensure your sound system MIDI keyboard, you should hear
is turned down. Turn on the WASP the sound of Oscillator 1 only.
DELUXE rear panel power switch. Turn up the other oscillator
and /or noise and adjust their
volume controls to create a mix.
In the Oscillator section, adjust the
FT (Foot) knob for either oscillator,
and you will hear the sound of
the various octaves. Adjust the
WAVEFORM controls and listen to
the differences.

Quick Start Guide 17

CONTROL OSC. SECTION EURORACK
Play with the FREQ. and PITCH The WASP DELUXE synthesizer can
MOD. controls to hear how they be taken out of its factory chassis
affect the speed and pitch of and fitted into a standard Eurorack
the oscillators. Use the Control case (not supplied). Please see the
Oscillator 6-way WAVEFORM details shown later in this manual.
switch to apply different control FIRMWARE UPDATE
waveforms and listen to how they Please check our website
affect the sound. behringer.com regularly for
FILTER and CONTROL any updates to the firmware of
ENV. SECTIONS your WASP DELUXE synthesizer.
Switch between lo-pass, The firmware file can be
bandpass, notch and hi-pass downloaded and stored on your
filters, and try playing with the computer, and then used to
cutoff frequency by using the update the WASP DELUXE.
FREQ. knob. Use the Q knob to The firmware file comes with
experiment with the filter contour detailed instructions on the
and slope. update procedure.
The CONTROL ENV. controls
are used to control the filter,
so play with the Attack, Decay and
Delay controls to hear how these
controls affect the filter sound.
Spend some time moving the
FILTER CONTROL knobs between
positive (+) and negative (-)
settings to hear how the different
combinations of rising or falling
control envelopes affect the
oscillators and filter.
ENVELOPE GENERATORS
SECTION
In this section, adjust the
Attack, Decay, and Sustain;
they affect the overall level over
time, while a note is played.
The loudness decay switch affects
the decay in level after a note
is released.

18 WASP DELUXE

WASP DELUXE System Exclusive Commands

Some parameters in the WASP DELUXE synthesizer can be Command Table
changed using MIDI system exclusive (SysEx) commands.
A MIDI utility such as the popular MIDI OX can be used to cc (Main) dd Description ff (Para Default
send the SysEx command data string to the WASP DELUXE (Sub) Range) 0
using the USB MIDI conection between a host computer 0- LOW
and the WASP DELUXE. 00 MIDI Channel 0 to 15
0- OFF
01 Key Priority 0-LOW
(In poly chain mode, 1-HIGH 12
SysEx Data Format note priority will be 2-LAST
The following data format is used when creating a restricted to ’LOW’)
SysEx message (with the data beginning with F0 and
ending with F7). 02 Multi Trigger 0-OFF
1-ON
F0 00 20 32 aa bb cc dd ee ff F7 (1.05 style)
The various items in this SysEx data string are 2-ON
described below: (1.06 style)

03 Pitch Bend 0 to 12
semitones
(Pitch wheel range)
Item Description Effective when pitch
00 20 32 Manufacturer SysEx ID number bend range not
aa (Behringer GmbH) fixed. See “OC Pitch
bb Reserved bend mode” below
Device ID: 00-0xF (must match hardware
cc device ID), or 7F to address all devices. 06 MIDI IN Transpose 0 to 24 12
dd Note: This is the same as the Poly Chain ID. The range is
ee It is not the MIDI Channel 0xA -12 to + 12,
ff Main parameter number (see Command Global so 12 is no
Table below) Setting transpose
Sub parameter number (see Command
Table below) 07 MIDI Note Zero Volts 0 to 127 36
Parameter value MSB (will be zero unless the
parameter value is greater than 127) 08 Poly Chain* see 0-OFF, 1-ON 0- OFF
Parameter value LSB (Range is 0 to 127) note below
(see Command Table below)
09 Device ID 0-15 0
(Poly Chain ID)

0A Enable/Disable MIDI 0- Enable 0-Enable
Channel Switches 1- Disable

0B Modulation Curve 0- Soft 0- Soft
1- Med
2- Hard

OC Pitch Bend Mode 0- PitchBend 0- Fixed
Range Fixed
1- PitchBend
Range
Settable

OD Poly Chain Style 0- New Style 0- New
1- Old Style Style

0xB Restore Global
Settings

0xE Start User Pitch
CV Calibration

0xF Restore Default
CV Calibration

Quick Start Guide 19

*Note: If you use SysEx instead of the recommended A-440 Poly Chain Style
method to turn on the Poly Chain, then the Poly Chain These two tables show the difference between old and new
Device ID of other units in the chain is not set automatically. poly chain style.
You have to use SysEx to set the Poly Chain ID of the first
WASP DELUXE to Device ID=0, the second WASP DELUXE TABLE OF NOTE RESPONSE -- Old poly chain style
to ID=1, the third WASP DELUXE to ID=3 and so on.
All WASP DELUXE units must have the same MIDI channel. Poly chain How many notes are playing 7
Device 1 234 5 6
Retriggering Style
These examples show the difference between the old and no. 0
new retriggering styles
1 Off Note1 Note1 Note1 Note1 Note1 Note1 Note1

2 Off Note1 Note2 Note2 Note2 Note2 Note2 Note2

Old style New style 3 Off Note1 Note1 Note3 Note3 Note3 Note3 Note3
(v1.0.5) (v1.0.6)
Example Retrigger No Retrigger 4 Off Note1 Note1 Note1 Note4 Note4 Note4 Note4
Press and hold note A.
Retrigger Retrigger 5 Off Note1 Note1 Note1 Note1 Note5 Note5 Note5
Note A is playing.
Then press and hold TABLE OF NOTE RESPONSE -- New poly chain style
note B. Note B is playing
(A stop). Release note A. Poly chain How many notes are playing 7
Press and hold note A. Note A Device 1 234 5 6
is playing. Then press and hold
note B. Note B is playing no. 0
(A stop). Release note B.
1 Off Note1 Note1 Note1 Note1 Note1 Note1 Note1

2 Off Off Note2 Note2 Note2 Note2 Note2 Note2

3 Off Off off Note3 Note3 Note3 Note3 Note3

4 Off Off Off Off Note4 Note4 Note4 Note4

5 Off Off Off Off Off Note5 Note5 Note5

Note:  Turning on the Poly Chain will affect the note
priority function

20 WASP DELUXE

WASP DELUXE System Exclusive Commands

Command Examples Note: A decimal to hex conversion table is shown below.
If you are using the MIDI Transpose command, then the 3rd
Note: All command parameters should be in column shows the MIDI IN Transpose that corresponds to
hexadecimal format. each data value. For example, if you wanted a transpose
of +8 as shown in the table above, then the data sent
Function SysEX Command String is 14 (hex).
Set MIDI Channel to 13 F0 00 20 32 00 7F 0A 00 00 0C F7
Set Key Priority to last F0 00 20 32 00 7F 0A 01 00 02 F7 Value Value (hex) MIDI Transpose
Turn on Multi Trigger F0 00 20 32 00 7F 0A 02 00 01 F7 0 0 -12
(1.05 style) 1 1 -11
Set Pitch Bend F0 00 20 32 00 7F 0A 03 00 0B F7 2 2 -10
semitone to 11 3 3 -9
Set MIDI IN Transpose F0 00 20 32 00 7F 0A 06 00 14 F7 4 4 -8
to +8 5 5 -7
Set Note C5 as Zero Volts F0 00 20 32 00 7F 0A 07 00 48 F7 6 6 -6
Turn on Poly Chain F0 00 20 32 00 7F 0A 08 00 01 F7 7 7 -5
Set Device ID to 5 F0 00 20 32 00 7F 0A 09 00 05 F7 8 8 -4
Disable MIDI F0 00 20 32 00 7F 0A 0A 00 01 F7 9 9 -3
Channel Switches 10 A -2
Set Modulation Curve F0 00 20 32 00 7F 0A 0B 00 01 F7 11 B -1
to Medium 12 C 0
Make pitch bend F0 00 20 32 00 7F 0A 0C 00 01 F7 13 D 1
range effective 14 E 2
Set poly chain style to F0 00 20 32 00 7F 0A 0D 00 01 F7 15 F 3
old style 16 10 4
17 11 5
18 12 6
19 13 7
20 14 8
21 15 9
22 16 10
23 17 11
24 18 12

Quick Start Guide 21

22 WASP DELUXE

WASP DELUXE Eurorack Installation

The WASP DELUXE synthesizer can be removed from its 3. Disconnect the two cables from the lower side of
factory chassis and installed into a standard Eurorack the main PCB of the WASP DELUXE, and remove
chassis (not supplied). The module width is 70HP. the assembly from the chassis.

We recommend that this procedure is undertaken only by 4. Store the chassis assembly and the power supply
experienced service technicians, to prevent personal injury, adaptor in a dry safe place.
or damage to the unit.
5. Securely connect the 10-pin end P1 of the
The Eurorack case will need its own suitable power supply supplied adapter cable to connector X23 on the
unit to power the WASP DELUXE synthesizer. Main PCB of the WASP DELUXE.

A 10-pin connector on the rear of the main PCB of the WASP X21 No Connection
DELUXE allows the +12 VDC power supply connection to be
made. A 10-pin to 16-pin adapter ribbon cable is supplied Pins 1 and 2
to connect to your power supply. No Connection
X23
Before proceeding, make sure that your Pins 3 to 8
power supply is capable of supplying +12 Ground
VDC, 1 Amp.
Pins 9 and 10
Make sure that the connections using the +12 VDC
supplied adapter cable will supply the ground
and power to the correct pins of X23. Supplied Eurorack Power Supply Cable, Part # A74-0001-79446
Connect End P1 to Connector X23 on main PCB
Procedure
Follow all steps in the order in which they are presented. P1 P2
Red Stripe
1. Disconnect the power cord and all other 21 12
connections to the WASP DELUXE.
10 9
2. Undo the 8 screws on the top panel as shown.
There is no need to undo any other screws. 400 mm ± 10 15 16

6. Make sure your power supply is turned
7. off and disconnected from the AC mains.
Make sure that your power supply will
above: supply the following to the pins of
connector X23, as shown in the diagram

Disconnect from Pins Connection
Main PCB 1 and 2 No Connection
3 to 8 Ground
9 and 10 +12 VDC

Quick Start Guide 23

8. Securely connect the 16-pin end P2 of the supplied
adapter cable to your power supply, and double
check all connections are correct.

9. Securely install the WASP DELUXE Synthesizer into
your Eurorack, using 8 screws in the front panel.

10. Perform a full test and safety test before using the
WASP DELUXE.

11. The 3.5 mm MAIN OUT connector on the top panel
is used instead of the .” rear outputs which are no
longer present.

Setting the MIDI Channel
Once installed in a Eurorack, the MIDI channel number
is automatically set to channel 1 (as the MIDI switches
are no longer present.)
The MIDI channel can be changed using MIDI OX or a similar
MIDI utility on your computer to send MIDI SysEx
commands directly to the WASP DELUXE via the USB MIDI
connection. Here is a brief guide to the procedure (see the
MIDI SysEx pages in this manual for the actual SysEx codes
sent to the WASP DELUXE):

1. Disable the MIDI Channel Switches by sending
the appropriate SysEx command.

2. Change the MIDI Channel by sending
the appropriate SysEx command.

24 WASP DELUXE Monophonic
Analog
Specifications 2 digitally controlled oscillators
1 (0.5 Hz to 100 Hz)
Synthesizer Architecture 1 switchable Lo, Band, Notch and Hi
Number of voices VCA, VCF
Type
Oscillators 5-pin DIN / 16 channels
LFO USB 2.0, type B
VCF 1 x ¼" TS, unbalanced, max. 0 dBu
Envelopes 1.3 k Ω
1 x ¼" TS, unbalanced, 27 dB below high output
Connectivity 1 kΩ
MIDI in / thru 3.5 mm TRS, unbalanced, max. 0 dBu
USB (MIDI) 3.5 mm TRS, unbalanced, max. -2 dBu @ 32 Ω
Main out (high) 25 Ω
High output impedance
Main out (low) Class compliant USB 2.0, type B
Low output impedance Windows XP or higher
Main Audio out Mac OS X 10.6.8 or higher
Phones
Phones output impedance 12 V DC 1000 mA
2W
USB
Type 5°C – 40°C (41°F – 104°F)

Supported operating systems 87 x 374 x 136 mm (3.4 x 14.7 x 5.4")
70 HP
Power Requirements 1.6 kg (3.5 lbs)
External power adapter 2.5 kg (5.5 lbs)
Power consumption

Environmental
Operating temperature range

Physical
Dimensions (H x W x D)
Module width
Weight
Shipping weight

Quick Start Guide 25

Other important information

Important information Aspectos importantes Informations importantes

1. Register online. 1. Registro online. 1. Enregistrez-vous
Please register your new Music Tribe Le recomendamos que registre su nuevo en ligne. Prenez le temps
equipment right after you purchase it by aparato Music Tribe justo después de d’enregistrer votre produit Music Tribe
visiting behringer. com. Registering your su compra accediendo a la página web aussi vite que possible sur le site Internet
purchase using our simple online behringer. com. El registro de su compra behringer. com. Le fait d’enregistrer le
form helps us to process your repair a través de nuestro sencillo sistema produit en ligne nous permet de gérer
claims more quickly and efficiently. online nos ayudará a resolver cualquier les réparations plus rapidement et plus
Also, read the terms and conditions of incidencia que se presente a la mayor efficacement. Prenez également le
our warranty, if applicable. brevedad posible. Además, aproveche temps de lire les termes et conditions de
para leer los términos y condiciones notre garantie.
2. Malfunction. Should your de nuestra garantía, si es aplicable en
Music Tribe Authorized Reseller not be su caso. 2. Dysfonctionnement. Si vous
located in your vicinity, you may contact n’avez pas de revendeur Music Tribe près
the Music Tribe Authorized Fulfiller for 2. Averías. En el caso de que no de chez vous, contactez le distributeur
your country listed under “Support” at exista un distribuidor Music Tribe en las Music Tribe de votre pays : consultez la
behringer. com. Should your country not inmediaciones, puede ponerse en contacto liste des distributeurs de votre pays dans
be listed, please check if your problem con el distribuidor Music Tribe de su la page “Support” de notre site Internet
can be dealt with by our “Online Support” país, que encontrará dentro del apartado behringer. com. Si votre pays n’est pas
which may also be found under “Support” “Support” de nuestra página web dans la liste, essayez de résoudre votre
at behringer. com. Alternatively, please behringer. com. En caso de que su país no problème avec notre “aide en ligne”
submit an online warranty claim at aparezca en ese listado, acceda a la sección que vous trouverez également dans la
behringer. com BEFORE returning “Online Support” (que también encontrará section “Support” du site behringer. com.
the product. dentro del apartado “Support” de nuestra Vous pouvez également nous faire
página web) y compruebe si su problema parvenir directement votre demande de
3. Power Connections. aparece descrito y solucionado allí. réparation sous garantie par Internet sur
Before plugging the unit into a power De forma alternativa, envíenos a través le site behringer. com AVANT de nous
socket, please make sure you are using the de la página web una solicitud online de renvoyer le produit.
correct mains voltage for your particular soporte en periodo de garantía ANTES de
model. Faulty fuses must be replaced devolvernos el aparato. 3. Raccordement au secteur.
with fuses of the same type and rating Avant de relier cet équipement au secteur,
without exception. 3. Conexiones de corriente. assurez-vous que la tension secteur
Antes de enchufar este aparato a una de votre région soit compatible avec
salida de corriente, asegúrese de que l’appareil. Veillez à remplacer les fusibles
dicha salida sea del voltaje adecuado uniquement par des modèles exactement
para su modelo concreto. En caso de de même taille et de même valeur
que deba sustituir un fusible quemado, électrique — sans aucune exception.
deberá hacerlo por otro de idénticas
especificaciones, sin excepción.

26 WASP DELUXE

Other important information

Weitere wichtige Outras Informações
Informationen Importantes

1. Online registrieren. 1. Registre-se online. Por favor,
Bitte registrieren Sie Ihr neues registre seu novo equipamento
Music Tribe-Gerät direkt nach dem Music Tribe logo após a compra visitando
Kauf auf der Website  behringer. com. o site behringer. com Registrar sua
Wenn Sie Ihren Kauf mit unserem compra usando nosso simples formulário
einfachen online Formular registrieren, online nos ajuda a processar seus
können wir Ihre Reparaturansprüche pedidos de reparos com maior rapidez
schneller und effizienter bearbeiten. e eficiência. Além disso, leia nossos
Lesen Sie bitte auch unsere termos e condições de garantia,
Garantiebedingungen, falls zutreffend. caso seja necessário.

2. Funktionsfehler. Sollte sich 2. Funcionamento
kein Music Tribe Händler in Ihrer Nähe Defeituoso. Caso seu fornecedor
befinden, können Sie den Music Tribe Music Tribe não esteja localizado nas
Vertrieb Ihres Landes kontaktieren, der auf proximidades, você pode contatar
behringer. com unter „Support“ aufgeführt um distribuidor Music Tribe para o
ist. Sollte Ihr Land nicht aufgelistet sein, seu país listado abaixo de “Suporte”
prüfen Sie bitte, ob Ihr Problem von em behringer. com. Se seu país não estiver
unserem „Online Support“ gelöst werden na lista, favor checar se seu problema pode
kann, den Sie ebenfalls auf  behringer. com ser resolvido com o nosso “Suporte Online”
unter „Support“ finden. Alternativ reichen que também pode ser achado abaixo
Sie bitte Ihren Garantieanspruch online de “Suporte”em behringer. com.
auf behringer. com ein, BEVOR Sie das Alternativamente, favor enviar uma
Produkt zurücksenden. solicitação de garantia online em
behringer. com ANTES da devolução
3. Stromanschluss. Bevor Sie das do produto.
Gerät an eine Netzsteckdose anschließen,
prüfen Sie bitte, ob Sie die korrekte 3. Ligações. Antes de ligar a unidade
Netzspannung für Ihr spezielles Modell à tomada, assegure-se de que está a
verwenden. Fehlerhafte Sicherungen utilizar a voltagem correcta para o modelo
müssen ausnahmslos durch Sicherungen em questão. Os fusíveis com defeito
des gleichen Typs und Nennwerts terão de ser substituídos, sem qualquer
ersetzt werden. excepção, por fusíveis do mesmo tipo e
corrente nominal.

Quick Start Guide 27

FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION

WASP DELUXE

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street
Las Vegas, NV 89118
Phone Number: USA
+1 702 800 8290

WASP DELUXE

complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by
Music Tribe can void the user’s authority to use the equipment.

We Hear You