The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Discover the best professional documents and content resources in AnyFlip Document Base.
Published by webteam, 2019-11-19 10:23:14

Pioneer XW-NAW1 EN

Pioneer XW-NAW1 EN


Slim Speaker System for iPod
Station d’accueil “Slim design” pour iPod
Schlankes Lautsprechersystem für den iPod
Sistema Diffusore Slim per iPod
“Slim Design” Speakersysteem voor de iPod
Sistema de altavoces «Slim Design» para iPod

Discover the benefits of registering your product online at (or

Découvrez les nombreux avantages offerts en enregistrant
votre produit en ligne maintenant sur (ou

Bitte nutzen Sie die Möglichkeit zur Registrierung Ihres

Produktes unter (oder

Registra il tuo prodotto su (o e scopri subito quali vantaggi puoi
Ontdek nu de voordelen van online registratie! Registreer uw

Pioneer product via - (of
Registre su producto en (o en Descubra los beneficios de
registrarse on-line:

Operating Instructions
Mode d’emploi
Istruzioni per I’uso
Manual de instrucciones



The lightning flash with CAUTION: The exclamation point
arrowhead symbol, TO PREVENT THE RISK within an equilateral
within an equilateral OF ELECTRIC SHOCK, triangle is intended to
triangle, is intended to DO NOT REMOVE alert the user to the
alert the user to the COVER (OR BACK). NO presence of important
presence of uninsulated USER-SERVICEABLE operating and
“dangerous voltage” PARTS INSIDE. REFER maintenance
within the product’s SERVICING TO (servicing) instructions
enclosure that may be QUALIFIED SERVICE in the literature
of sufficient magnitude PERSONNEL. accompanying the
to constitute a risk of appliance.
electric shock to
persons. D3-4-2-1-1_A1_En

eInqfuoirpmmaetinotnafnodr uusseerdsboanttecroilelesction and disposal of old

Symbol for These symbols on the products, packaging, and/or
equipment accompanying documents mean that used electrical
and electronic products and batteries should not be
mixed with general household waste.

Symbol examples For proper treatment, recovery and recycling of old
for batteries products and used batteries, please take them to
applicable collection points in accordance with your
national legislation.
By disposing of these products and batteries correctly,
you will help to save valuable resources and prevent
any potential negative effects on human health and the
environment which could otherwise arise from
inappropriate waste handling.

For more information about collection and recycling of
old products and batteries, please contact your local
Pb municipality, your waste disposal service or the point of

sale where you purchased the items.

These symbols are only valid in the European

For countries outside the European Union:

If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct
method of disposal.



WARNING VENTILATION CAUTION English Français Deutsch Italiano Nederlands Español
This equipment is not waterproof. To When installing this unit, make sure
prevent a fire or shock hazard, do not to leave space around the unit for
place any container filled with liquid ventilation to improve heat radiation
near this equipment (such as a vase (at least 10 cm at top and 10 cm at
or flower pot) or expose it to dripping, each side).
splashing, rain or moisture.
D3-4-2-1-3_A1_En Slots and openings in the cabinet are
provided for ventilation to ensure
WARNING reliable operation of the product, and
Before plugging in for the first time, to protect it from overheating. To
read the following section carefully. prevent fire hazard, the openings
The voltage of the available power should never be blocked or covered
supply differs according to country with items (such as newspapers,
or region. Be sure that the power table-cloths, curtains) or by operating
supply voltage of the area where the equipment on thick carpet or a
this unit will be used meets the bed.
required voltage (e.g., 230 V or 120
V) written on the AC adapter label. D3-4-2-1-7b*_A1_En

D3-4-2-1-4*_A1_En This speaker system is cannot be
used nearby a CRT-based TV or color
WARNING monitor. When using this
To prevent a fire hazard, do not place kind of CRT-based TV or color
any naked flame sources (such as a monitor, install the speakers away
lighted candle) on the equipment. from the display device. Any other
device liable to be influenced by
D3-4-2-1-7a_A1_En magnetism (floppy disk drive,
cassette tape recorder, video tape
Operating Environment player, etc.) should also be kept at a
Operating environment temperature distance from the speaker system.
and humidity:+5 °C to +35 °C (+41 °F
to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly
ventilated area, or in locations
exposed to high humidity or direct
sunlight (or strong artificial light)




AC adapter caution CAUTION
• Make sure to grasp the body of the The (Power) key on this
unit will not completely shut off
AC adapter when removing it from all power from the AC outlet.
the power outlet. If you pull the Since the AC adapter serves as
power cord, it may become the main disconnect device for
damaged which could lead to fire the unit, you will need to unplug
and/or electrocution. it from the AC outlet to shut
• Do not attempt to plug in or remove down all power. Therefore, make
the AC adapter with wet hands. This sure the unit has been installed
may result in electrocution. so that the AC adapter can be
• Insert the prongs of the AC adapter easily unplugged from the AC
all the way into the power outlet. If outlet in case of an accident. To
the connection is incomplete, heat avoid fire hazard, the AC
may be generated which could lead adapter should also be
to fire. Furthermore, contact with unplugged from the AC outlet
the connected prongs of the when left unused for a long
adapter may result in electrocution. period of time (for example,
• Do not insert the AC adapter into a when on vacation).
power outlet where the connection
remains loose despite inserting the D3-4-2-2-2a*_A1_En
prongs all the way into the outlet.
Heat may be generated which could This product is for general
lead to fire. Consult with the retailer household purposes. Any failure
or an electrician regarding due to use for other than
replacement of the power outlet. household purposes (such as
• Do not place the unit, a piece of long-term use for business
furniture, etc., on the power cord, or purposes in a restaurant or use
pinch the cord. Never make a knot in a car or ship) and which
in the cord or tie it with other cords. requires period.
The power cords should be routed
such that they are not likely to be K041_A1_En
stepped on. A damaged AC adapter
and power cord can cause a fire or
give you an electrical shock. Check
the AC adapter and the power cord
once in a while. When you find it
damaged, ask your nearest
PIONEER authorized service center
or your dealer for a replacement.



Thank you for buying this Pioneer product. English Français Deutsch Italiano Nederlands Español

Please read through these operating instructions so that you will
know how to operate your model properly. After you have finished
reading the instructions, put them in a safe place for future


Unpack Power adapter
The first thing to do is unpack
the XW-NAW1-K package and Slide the power plug along the
make sure it includes all of the guide rails of the AC adapter as
following contents: shown in the figure below until
• XW-NAW1-K main unit there is an audible click.
• Legs for table placement

• AC adapter

(UK region)
(EU region)

• Adapter inserts
• Remote control
• Lithium battery (CR2025)
• Warranty Card
• Operating Instructions
(This document)



Setting Up

Once you’ve found where you’d like to put the XW-NAW1-K,
you have two placement options:
Stand it up:
The XW-NAW1-K comes with removable legs for upright placement on
a flat surface. Simply attach the legs to the back of the XW-NAW1-K
to leave the unit in this position (see below for details).
Hang it on the wall:
The back of the XW-NAW1-K has two mounting holes that fit over
screws of article on the market (refer to page 7).

Attaching the legs
for table placement

1. Position one of the legs over
one of the recessed areas on
the back of the XW-NAW1-K
as shown.

2. Insert the leg into the recessed
area and press upward to lock
it in place.

3. Repeat with the other leg.
The XW-NAW1-K is ready to
place upright on a flat surface.



Setting Up English Français Deutsch Italiano Nederlands Español

Wall mounting XW-NAW1-K to a wall

XW-NAW1-K is can be mounted on a wall if desired. Before
performing a wall mounting, complete the wiring connections.

• Remember that XW-NAW1-K is heavy and that its weight could

cause the screws to work loose, or the wall material to fail to
support it, resulting in XW-NAW1-K falling. Make sure that the
wall you intend to mount XW-NAW1-K on is strong enough to
support them. Do not mount on plywood or soft surface walls. If
you are unsure of the qualities, consult a professional for advice.
• Pioneer is not responsible for any accidents or damage that
result from improper installation, misuse or modification of the
product, or natural disasters.
• Mounting screws are not supplied. Use screws suitable for wall
material and support the weight of XW-NAW1-K.

260 mm

6 mm 2 mm to 3 mm
14 mm

15 mm to 17mm
Screw (not supplied)

• Hang the XW-NAW1-K as shown, on the screws that are aligned
to the two mounting holes on the rear of the XW-NAW1-K.

• Confirm that the screws come fully to the top of the mounting



Using The XW-NAW1-K

Once you’ve found a place PR PB Y
for your XW-NAW1-K, you’re
just a step or two away from COMPONENT VIDEO OUT AUX IN DC IN 16V
experiencing the music from
your iPod like you’ve never heard Caution
it before. All you have to do is Do not insert the power plug in
insert any iPod with 30-pin dock the wall outlet without attaching
connector into the universal it to the AC adapter.
dock of the XW-NAW1-K. Then • A short circuit may result if a
plug the XW-NAW1-K in, turn it
on, and enjoy! metal piece gets in the space
The XW-NAW1-K offers other between the electrodes or
usage options as well. You can an electric shock may result
use it to listen to other audio when pulled out from the
sources or send the video from outlet.
your iPod to a display.

Plugging in
and turning on

1. Insert the cable of the AC
adapter into the DC IN jack
on the bottom of the XW-

2. Plug the AC adapter into a
wall outlet or surge protector.

• Do not use a switchable outlet.

This AC adapter should be
plugged in so that it stays
vertical or lays flat.
• Please do not use the one
other than the attachment.
3. Press the (power) key
on the front panel of the XW-



Using The XW-NAW1-K English Français Deutsch Italiano Nederlands Español

Confirm what iPod models are supported

This system is compatible with the audio and video of the iPod
nano third generation and above, iPod classic, iPod touch and
iPhone. It also supports audio playback on the iPod nano second
Always use the most recent version of iPod software available.
Operation compatibility may vary depending on the version of the
software used.

• Some functions may be restricted depending on the model or

software version.
• iPod is licensed for reproduction of non-copyrighted materials or

materials the user is legally permitted to reproduce.
• Pioneer cannot under any circumstances accept responsibility for

any direct or indirect loss arising from any inconvenience or loss
of recorded material resulting from the iPod failure.

Inserting your iPod

Adapter identification chart

iPod classic 80 GB Adapter Adapter Symbol
iPhone nano 160 GB (2007) A
120 GB 160 GB (2009) Symbol
touch 2nd generation
3G 3rd generation C
3GS 4th generation D
5th generation C
1st generation A
2nd generation B
4 GB 8 GB 16 GB A
8 GB 16 GB B
16 GB 32 GB E




Using The XW-NAW1-K

• All adapters other than Adaptor Symbol A and B come with a

iPhone Rubber

Adapter E Adapter C, D

Inserting your iPod 1
1. Push the front of the XW-NAW1-
K’s dock. The docking door opens.

2. Find the insert that goes with your
iPod model (or use the insert that
came with your iPod). The models
compatible with each insert are
listed in one of the corners on the
top of the insert. Gently place the
insert over the 30-pin dock. The
back of the insert should rest on
the ridge just behind the dock on
the XW-NAW1-K.




Using The XW-NAW1-K English Français Deutsch Italiano Nederlands Español

3. Place the dock connector on your 3
iPod onto the XW-NAW1-K dock. 4
Push down gently until the iPod
rests firmly in the insert and on the

4. Gently press the docking door back
into place as shown. The door clicks
when it’s completely closed.

It is not trouble though the noise might
occur when iPod / iPhone is detached
in Power on.

Front Panel Keys

(Power) Turns the XW-NAW1-K on and off. Also brings a
docked iPod out of sleep mode when the XW-NAW1-K turns on.
VOLUME – / + Turns the XW-NAW1-K volume down or up.

(Skip back) Goes to the previous track (or to the beginning of
the song currently playing) in the current playlist on your docked

(Play / Pause) Starts and pauses playback on your docked
Press and hold the (Play / Pause) key to switch to AUX.

(Skip forward) Goes to the following track in the current
playlist on your docked iPod.



Using The XW-NAW1-K

Before Using The
remote control

Remove the protective seal from the
battery casing.

Remote control

The remote control that came with the XW-NAW1-K can operate the
functions of an iPod that is docked.
Important: The remote control cannot be used to control the playback
functions of the auxiliary source. For these audio sources, the remote
control and main unit controls can only be used to adjust the volume
level, mute, and power functions for the XW-NAW1-K.

When using lithium batteries, please observe the following:
• There is danger of explosion if the battery is incorrectly replaced.

Make sure to replace only with the same or equivalent type
recommended by the manufacturer.
• Dispose of used battery cells immediately after replacement. Keep
away from children.
• If swallowed, please contact a doctor immediately.
• Lithium batteries may present a fire or chemical burn hazard if
misused. Do not disassemble, heat above 100 °C, or incinerate.
• Remove the battery if the unit isn’t going to be used for a month or
• When disposing of used batteries, please comply with governmental
regulations or environmental public instruction’s rules that apply in
your country / area.
• Do not use or store batteries in direct sunlight or other excessively
hot place, such as inside a car or near a heater. This can cause
batteries to leak, overheat, explode or catch fire. It can also reduce
the life or performance of batteries.



Using The XW-NAW1-K English Français Deutsch Italiano Nederlands Español

(Power) Turns the XW-NAW1-K on
and off. Also brings a docked iPod out
of sleep mode when the XW-NAW1-K
turns on.

(Play / Pause) Starts and pauses
playback on your docked iPod. Press
and hold the (Play / Pause) key to
switch to AUX.

(Mute) Lowers the XW-NAW1-K
volume to its minimum level.

(Skip back) Goes to the previous
track (or to the beginning of the song
currently playing) in the current playlist
on your docked iPod.

(Skip forward) Goes to the
following track in the current playlist
on your docked iPod.
VOLUME – / + Turns the XW-NAW1-K
volume down or up.



Using The XW-NAW1-K

Connecting to an PR PB Y
auxiliary audio

1. Make sure the XW-NAW1-K To switch back to your docked
and the auxiliary audio source
are both turned off. iPod:
Turn off the auxiliary source
2. Connect an audio cable (not press the (Play / Pause)
included) to the output of the key on the XW-NAW1-K remote
audio source. control or front panale to turn on
your iPod.
This end of the cable should
match the output of the source
(for example, 3.5 mm stereo
mini-jack, 1/4” stereo jack, or
RCA stereo jacks).

3. Connect the other end of the
audio cable to the auxiliary
input jack on the bottom of the
XW-NAW1-K. This end of the
cable must be a 3.5 mm stereo

4. Turn on the audio source and
the XW-NAW1-K. Press and
hold the (Play / Pause)
key on the XW-NAW1-K
remote control or front panel
to turn your iPod off. (it will
continue to charge while it’s
connected). Start playing the
auxiliary audio source.



Using The XW-NAW1-K English Français Deutsch Italiano Nederlands Español

Connecting to PR PB Y
a video display
1. Make sure the XW-NAW1-K
and the video display device Important: Make sure the
are both turned off. video settings on your iPod
are adjusted correctly to watch
2. Connect a component video video on a separate display. You
cable (not included) to the might need to remove the iPod
component video output from the XW-NAW1-K dock to
jacks on the bottom of the change these settings. See the
XW-NAW1-K. Make sure you user manual that came with
match the color of each plug your iPod for more information.
to a jack of the same color.

3. Connect the other end of the
component video cable to an
available set of component
video input jacks on the video
display device. Make sure
you match the color of each
plug to a jack of the same

4. Turn on the video source
and XW-NAW1-K. Select the
correct input on the video
source to watch the signal
from the XW-NAW1-K.

5. Select a video on your iPod
and play it.



Additional Information


Incorrect operations are often mistaken for trouble and malfunctions.
If you think that there is something wrong with this component,
check the points below. Sometimes the trouble may lie in another
component. Investigate the other components and electrical
appliances being used. If the trouble cannot be rectified even
after exercising the checks listed below, ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
• If the unit does not operate normally due to external effects such as

static electricity disconnect the power plug from the outlet and insert
again to return to normal operating conditions.
iPod Does Not Connect to Speaker System
• Remove iPod from the dock and confirm that you are using the
appropriate insert for the model of iPod you have.
• Detach the iPod from the XW-NAW1-K and check for any
obstructing debris.
• Reinsert iPod into docking port and establish a secure connection.
No Sound Is Produced
• Inspect wall outlet and ensure that the AC adapter is firmly plugged
into the outlet.
• If you’re trying to listen to an auxiliary audio source, make sure the
audio cables are securely connected to the source and to the XW-
• Make sure the XW-NAW1-K is turned on. Press the power button on
the XW-NAW1-K front panel if the front panel is not illuminated.
• Select and play the desired music you wish to play.
• Make sure that the volume is turned up.
• If there still is no sound, remove the iPod from the docking port, turn
the XW-NAW1-K off, unplug the unit from the wall outlet, wait one to
two minutes, and then plug the AC adapter back into the wall outlet,
turn the XW-NAW1-K back on, put your iPod into the dock, and try the
above steps again.



Additional Information English Français Deutsch Italiano Nederlands Español

Remote Control Does Not Control Docked iPod

• Remove the iPod from the docking port and reattach it, making sure

that there is a secure fit between the iPod and the docking port.

• Make sure that there is a clear path between the remote control and

the remote sensor on the unit, and make sure that you are pointing

the remote control directly at the remote sensor on the unit.

• Remove the remote control’s battery to ensure that it is correctly

inserted in the battery compartment. If not inserted properly,

realign the battery to fit securely into the compartment.

• Move around the room and try to use the remote from more than

one location.

• Press the remote control’s power button on and off to verify that

the remote signal is controlling the main unit.

• If you still cannot operate the docked iPod with the remote control,

make sure the remote control operates the other speaker system

functions (volume, power). If it does not control these functions, replace

the battery in the remote control with a new battery.

iPod Does Not Charge

• Turn the XW-NAW1-K off.

• Remove iPod from the docking port and confirm that you are

using the appropriate insert for the model of iPod you have.

• Detach the iPod from the dock and check for obstructing debris

that may have lodged in the docking port.

• Reinsert iPod into docking port and establish a secure


• Turn the XW-NAW1-K back on.

Video Does Not Display On My TV

• Make sure the component video cable is securely connected to

both the XW-NAW1-K video output jacks and the video display’s

input jacks.

• Make sure you’ve selected the correct input on your video

display. See your display’s user guide for more information.

• Make sure you’ve made the proper adjustments to the video

settings on your iPod. See the user guide that came with your 17

iPod for more information. En

Additional Information

Maintenance of external surfaces

• Clean the surface by wiping with a soft, dry cloth.
• When the surfaces are very dirty, wipe with a soft cloth dipped

in some neutral cleanser diluted five or six times with water, and
wrung out well, and then wipe again with a dry cloth. Do not use
furniture wax or cleaners.
• Never use thinners, benzine, insecticide sprays and other chemicals
on or near this unit, since these will corrode the surfaces.

Product specifications

Model: XW-NAW1-K
RMS Power Output: 15 W+15 W (1 kHz, 10% T.H.D., 8 Ω)
13 mm horn-loaded tweeters
76 mm Neodymium mid-bass drivers with ported enclosure
Proximity sensor touch panel
Component video output
Auxiliary audio input
iPod: 5 V, 500 mA
AC adapter
Power requirement: AC 100 V to 240 V, 50 Hz/60 Hz
Rated output : DC 16 V/2.25 A
Weight (without package): 3.3 kg
Dimensions (without legs): 520 mm(W) × 281 mm(H) × 83 mm(D)
• Specifications and the design are subject to possible modifications

without notice, due to improvements.
• This product is not designed for use in JAPAN.



Additional Information English Français Deutsch Italiano Nederlands Español

About iPod / iPhone

“Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod or
iPhone, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and
regulatory standards.
iPod and iPhone are trademarks of Apple Inc., registered in the U.S.
and other countries.

Published by Pioneer Corporation.
Copyright © 2010 Pioneer Corporation.

All rights reserved.



Published by Pioneer Corporation.
Copyright © 2010 Pioneer Corporation.

All rights reserved.
Publication de Pioneer Corporation.

© 2010 Pioneer Corporation.
Tous droits de reproduction et de traduction réservés.

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan


P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404


300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada

TEL: 1-877-283-5901, 905-479-4411


Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11


253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555


178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300


Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000

TEL: 55-9178-4270


Printed in China / Imprimé en Chine <ARE7659-A>

Click to View FlipBook Version