1-3/4” MAHOGANY FRENCH
IG GLASS DOORS
Door Specifi cations:
5-1/2” Stiles
(includes the sticking)
4-7/16”Top Rail
(includes the sticking)
9-1/4” Bottom Rail
(includes the sticking)
Ovolo Sticking
Muntin Bars are 1-1/4”Wide
Prehung on Primed
Framesaver with
Primed FJ BM
French Mahogany
10 LITE 15 LITE 512 -12 LITE 1 PANEL
Door Only Door Unit Door Only Door Unit Door Only Door Unit
Code: LM5010_ _ EXTWOOD LM5512_ _ EXTWOOD
Size: LM5015_ _ EXTWOOD
2/0 X 6/8 $1,145.71 $1,445.09
2/6 x 6/8 N/S N/S N/S N/S N/S N/S
2/8 X 6/8 N/S N/S $1,170.92 $1,470.30 N/S
3/0 X 6/8 N/S N/S $1,196.10 $1,495.48 N/S N/S
$1,196.10 $1,495.48 $1,508.11
N/S
$1,208.73
Sidelite Specifications:
Stiles 1-7/8” for 1/0
(includes the sticking)
Stiles 2-7/8” for 1/2
(includes the sticking)
1/2” IG Glass
Ovolo sticking
Muntin Bars are 1-1/4”Wide
#1705 #1703 #1701
S/L Only S/L Unit
S/L Only S/L Unit LM1703_ _ EXTWOOD S/L Only S/L Unit
Codes: LM1705_ _ EXTWOOD LM1701_ _ EXTWOOD
Size: $851.11 $984.17 $881.33 $1,014.39 $850.76 $983.82
1/0 x 6/8* $851.11 $984.17 $881.33 $1,014.39 $850.76 $983.82
1/2 x 6/8
*1/0 Sidelites are cut from 1/2
March 19, 2019 Prices Subject to Change without Notice F-8
1-3/4" Knotty Alder Exterior
SPECIFICATIONS:
Panels are 1-3/8" Raised Panel
Doors Bottom Rail is 9-1/8" (includes sticking)
Stile Width is 5-1/2" (includes sticking)
Top Rail is 6-1/2" (includes sticking)
Ultimate Fir Astragal on Twin Units
All Glass is 5/8" Low E Insulated
Hung on Primed Framesaver with Primed FJ BM
4662-VA Door
Ovolo Sticking
1-3/8" Raised Panel
DOOR
DOOR ONLY UNIT
CODES RVK4662_ _ EXTWOOD
SIZE $1,028.67 $1,328.05
$1,045.05 $1,344.43
2/8 X 6/8
3/0 X 6/8 N/A $2,984.97
5/4 X 6/8 N/A $3,016.74
6/0 X 6/8
All WOOD DOORS REQUIRE AN OVERHANG TO COMPLY WITH THE MANUFACTURER'S WARRANTY
DOORS MUST BE FINISHED ON ALL SIX SIDES OR THE WARRANTY WILL BE VOID
ALWAYS COMPLETELY FINISH YOUR UNIT WITH 3-4 COATS OF TOP QUALITY FINISH
March 19, 2019 Prices Subject to Change without Notice F-9
1-3/4" Fir Exterior
SPECIFICATIONS:
All Panels are 1-3/8" Raised Panel or 5/8" Flat Panel
Stile Width is 5-1/2" (includes sticking)
Top Rail is 4-1/2" (includes sticking)
Ultimate Fir Astragal on Twin Units
All Glass is 5/8" Low E Insulated
Prehung on Primed Framesaver with Primed FJ BM
4461-V Door 4461-VA Door 412-V Door 9662 Door
Square Sticking
Sticking Ovolo Sticking Ovolo Sticking Ovolo Sticking
Panels 1-3/8" Beaded Raised Panel 5/8" Flat Panel
DOOR DOOR DOOR DOOR DOOR DOOR DOOR DOOR
ONLY UNIT ONLY UNIT ONLY UNIT ONLY UNIT
CODES RVF4661_ _ EXTWOOD RVF4661A_ _ EXTWOOD RVF412_ _ EXTWOOD RVF9662_ _ EXTWOOD
SIZE
2/8 X 6/8 $1060.32 $1,359.70 $1,180.95 $1,480.33 $1,187.30 $1,486.68 $911.11 $1,210.49
3/0 X 6/8 $1076.19 $1,375.57 $1,203.17 $1,502.55 $1,193.65 $1,493.03 $923.81 $1,223.19
5/4 X 6/8 $3,047.27 $3,288.54 $3,301.24 $2,748.86
6/0 X 6/8 N/A $3,079.02 N/A $3,332.99 N/A $3,313.94 N/A $2,774.26
N/A N/A N/A N/A
Add for Optional Dentil Shelf - 130.00 per Door
4461-V Sidelite 4704-V Sidelite
Ovolo Sticking Ovolo Sticking
1-3/8" Beaded Raised Panel
S/L ONLY S/L UNIT S/L ONLY S/L UNIT
CODES RVF4661_ _ EXTWOOD RVF4704_ _ EXTWOOD
SIZE
1/0 X 6/8 $546.03 $679.09 $549.21 $682.27
1/2 X 6/8 $546.03 $679.09 $549.21 $682.27
For double Sidelite Unit - Double Sidelite Unit price and add to Single Door Unit Price
All WOOD DOORS REQUIRE AN OVERHANG TO COMPLY WITH THE MANUFACTURER'S WARRANTY
DOORS MUST BE FINISHED ON ALL SIX SIDES OR THE WARRANTY WILL BE VOID
ALWAYS COMPLETELY FINISH YOUR UNIT WITH 3-4 COATS OF TOP QUALITY FINISH
Prices Subject to Change without Notice
March 19, 2019 F-10
1-3/4”VERTICAL GRAIN FIR
SPECIFICATIONS:
All Panels are “Split-Proof” 1-1/8” Raised Panel
6/8 Doors Bottom Rails Are 9-1/4” (includes the sticking)
7/0 Doors Bottom Rails Are 13-1/4” (includes the sticking)
Ultimate Fir Astragal on Twin Units
Stile Width is 4-1/2” (includes the sticking)
Ovolo Sticking
Top Rail is 4-7/16”
Prehung on Primed Framesaver with Primed FJ BM
#2130 #2022 #2010 #2044 #2033
DR ONLY DR UNIT DR ONLY DR UNIT DR ONLY DR UNIT DR ONLY DR UNIT DR ONLY DR UNIT
6/8 HEIGHTS 6/8 HEIGHTS 6/8 HEIGHTS 6/8 HEIGHTS 6/8 HEIGHTS
CODES NF2130_ _ EXTWOOD NF2022_ _ EXTWOOD NF2010_ _ EXTWOOD NF2044_ _ EXTWOOD NF2033_ _ EXTWOOD
SIZE
$608.54 $907.92 N/S N/S N/S N/S $613.52 $912.90 N/S N/S
2/6 $608.54 $907.92 $613.52 $912.90
2/8 $608.54 $907.92 N/S N/S N/S N/S $613.52 $912.90 N/S N/S
3/0 $2,143.72 $667.97 $967.35 $717.43 $1016.81 $2,153.69 $692.67 $992.05
5/0 N/A $2,143.72 N/A $2,153.69
5/4 N/A $2,143.72 N/A N/S N/A N/S N/A $2,153.69 N/A N/S
6/0 N/A N/A
N/A N/S N/A N/S N/A N/S
CODES N/A $2262.58 N/A $2361.50 N/A $2,311.97
SIZE
7/0 HEIGHTS 7/0 HEIGHTS 7/0 HEIGHTS 7/0 HEIGHTS 7/0 HEIGHTS
2/6
2/8 NF2130_ _70 EXTWOOD NF2022_ _70 EXTWOOD NF2044_ _70 EXTWOOD NF2033_ _70 EXTWOOD
3/0
5/0 $732.25 $1,063.71 N/S N/S Always Completely Finish N/S N/S N/S N/S
5/4 $732.25 $1,063.71 N/S Your Unit With 3-4 Coats Of N/S N/S
6/0 $732.25 $1,063.71 $791.68 N/S $737.21 N/S $816.41 N/S
$2,475.49 N/A $1,123.14 Top Quality Finish N/A $1,068.67 N/A $1,147.87
N/A $2,475.49 N/A N/A N/A
N/A $2,475.49 N/A N/S DOORS MUST BE FINISHED N/A N/S N/A N/S
N/A ON ALL SIX SIDES
N/S N/S N/S
$2,594.35 $2,485.39 $2,643.81
March 19, 2019 Prices Subject to Change without Notice F-11
1-3/4”VERTICAL GRAIN FIR
Specifications:
All Panels are “Split-Proof” 1-1/8”Thick
6/8 Doors Bottom Rails are 9-1/4” (includes the sticking)
7/0 Doors Bottom Rails are 13-1/4” (includes the sticking)
Stile Width is 4-1/2” (includes the sticking)
Top Rail is 4-7/16”
All Glass is Tempered
Single Glazed (SG) Glass is 1/8”
Insulated Glass (IG) is 1/2”
Prehung on Primed Framesaver with Primed FJ BM
#2020 (SINGLE GLAZED) #2132 (SINGLE GLAZED) #2134 (SINGLE GLAZED)
DR ONLY DR UNIT
DR ONLY DR UNIT DR ONLY DR UNIT
6/8 HEIGHTS
CODES NF2020_ _ EXTWOOD NF2132_ _ EXTWOOD NF2134_ _ EXTWOOD
SIZE
N/S N/S N/S N/S N/S N/S
2/0 $692.67 $992.05 $568.98 $868.36 $692.86 $992.24
2/6 $692.67 $992.05 $568.98 $868.36 $692.86 $992.24
2/8 $692.67 $992.05 $568.98 $868.36 $692.86 $992.24
3/0
4/0 N/A N/S N/A N/S N/A N/S
5/0 N/A $2,311.97 N/A $2,064.61 N/A $2,312.35
5/4 N/A $2,311.97 N/A $2,064.61 N/A $2,312.35
6/0 N/A $2,311.97 N/A $2,064.61 N/A $2,312.35
7/0 HEIGHTS
CODES NF2020_ _70 EXTWOOD NF2132_ _70 EXTWOOD NF2134_ _70 EXTWOOD
SIZE
$816.41 $1,147.87 $605.40 $936.86 N/S N/S
2/6 $816.41 $1,147.87 $605.40 $936.86 N/S N/S
2/8 $816.41 $1,147.87 $605.40 $936.86 $742.90 $1,136.90
3/0 $2,643.81 $2,221.77 N/A N/S
5/0 N/A $2,643.81 N/A $2,221.77 N/A N/S
5/4 N/A $2,643.81 N/A $2,221.77 N/A $2,250.45
6/0 N/A N/A
March 29, 2019 Prices Subject to Change without Notice F-12
1-3/4”VERTICAL GRAIN FIR
1/2” IG GLASS
#5010 #5015 #5944 #5512 #5144 #5001
DR ONLY DR UNIT DR ONLY DR UNIT DR ONLY DR UNIT DR ONLY DR UNIT DR ONLY DR UNIT DR ONLY DR UNIT
6/8 HEIGHTS
CODES NF5010_ _ EXTWOOD NF5015_ _ EXTWOOD NF5944_ _ EXTWOOD NF5512_ _ EXTWOOD NF5144_ _ EXTWOOD NF5001_ _ EXTWOOD
SIZE $742.19 $1041.57 N/S N/S N/S N/S N/S N/S N/S N/S $395.84 $695.22
2/0 $717.43 $1,016.81 $455.21 $754.59
$717.43 $1,016.81 $474.98 $774.36
2/6 N/S N/S $841.11 $1,140.49 $816.41 $1,115.79 N/S N/S $717.43 $1,016.81 $474.98 $774.36
$1,288.94 $1,718.32
2/8 N/S N/S $865.87 $1,165.25 $816.41 $1,115.79 $989.56 $1,288.94 N/A N/S N/A $1,837.05
N/A $2,361.50 N/A $1,876.61
3/0 N/S N/S $873.33 $1,172.71 $816.41 $1,115.79 $989.56 N/S N/A $2,361.50 N/A $1,876.61
N/A $2,361.50 N/A
4/0 N/A $2,411.02 N/A N/S N/A N/S N/A
5/0 N/A N/S N/A $2,608.86 N/A $2,559.47 N/A N/S
5/4 N/A N/S $2,905.75
6/0 N/A N/S N/A $2,658.39 N/A $2,559.47 N/A $2,905.75
N/A $2,673.31 N/A $2,559.47 N/A
7/0 HEIGHTS
ALWAYS CODES NF5015_ _70 EXTWOOD NF5944_ _70 EXTWOOD NF5512_ _70 EXTWOOD N/A NF5001_ _70 EXTWOOD
COMPLETELY SIZE
FINISH YOUR UNIT $915.33 $1,246.79 N/A N/S N/S N/S Always completely finish your N/S N/S
WITH 3-4 COATS 2/6 $940.10 $1,271.56 N/A N/S $1,113.24 $1,444.70 unit with 3-4 coats of Top N/S N/S
2/8 $1,271.56 $1,113.24 $1,444.70 Quality Finish $573.94 $905.40
OF TOP N/S N/A N/S
QUALITY FINISH. N/S N/A N/S DOORS MUST BE N/A N/S
$2,891.17 N/A $3,237.46 FINISHED ON ALL SIX N/A $2,158.85
DOORS MUST BE 3/0 $940.10 $12,71.56 $940.10 N/A $3,237.46
FINISHED ON ALL 5/0 N/A $2,841.65 N/A SIDES
5/4 N/A $2,891.17 N/A
SIX SIDES
6/0 N/A $2,891.17 N/A
Prehung on Primed Framesaver with Primed FJ BM
#5701 #5702 #5703 #5705 #1804
S/L ONLY S/L ONLY S/L UNIT S/L ONLY S/L UNIT
S/L UNIT S/L ONLY S/L UNIT S/L ONLY S/L UNIT
NF5701_ _ NF5705_ _ EXTWOOD NF5712_ _ EXTWOOD
EXTWOOD 6/8 HEIGHTS
$497.27
CODES $497.27 $630.33 NF5702_ _ EXTWOOD NF5703_ _ EXTWOOD
SIZE $531.97 $630.33
$665.03 $559.11 $692.17 $573.94 $707.00 $524.48 $657.54 $573.94 $707.00
1/0 $522.02 $559.11 $692.17 $573.94 $707.00 $524.48 $657.554 $573.94 $707.00
1/2 $522.02 $725.17 $618.44 $751.50 $604.00 $747.00 $564.03 $697.09
1/6 $725.17 NS NS
$696.67 $899.81 $549.21
1/0 $696.67 $899.81 7/0 HEIGHTS $801.84 $549.21 $752.35 $598.70 $801.84
1/2 $598.70 $801.84 $752.35 $598.70 $801.84
$598.70
March 19, 2019
*1/0 Sidelites are cut from 1/2
Prices Subject to Change without Notice F-13
1-3/4”VERTICAL GRAIN FIR
SINGLE GLAZE GLASS
Specifications:
All Panels are “Split-Proof” 1-1/8” Raised Panel Single
Glazed (SG) is 1/8”
6/8 Door Bottom Rails are 9-1/4”
7/0 Door Bottom Rails are 13-1/4”
Stile Width is 4-1/2” (includes the sticking)
Top Rail is 4-7/16”
All Glass is Tempered
Prehung on Primed Framesaver with Primed FJ BM
#944 #2662 #2035 #418 #318
DR UNIT
DR ONLY DR ONLY DR UNIT DR ONLY DR UNIT DR ONLY DR UNIT DR ONLY DR UNIT
6/8 HEIGHTS
CODES NF944_ _ EXTWOOD NF662_ _ EXTWOOD NF2035_ _ EXTWOOD NF418_ _ EXTWOOD NF318_ _ EXTWOOD
SIZE
$593.75 $893.13 N/S N/S $791.68 $1,091.06 $568.98 $868.36 $568.98 $868.36
2/6 $593.75 $893.13 $766.89 $1,066.27 $791.68 $1,091.06 $568.98 $868.36 $568.98 $868.36
2/8 $593.75 $893.13 $766.89 $1,066.27 $791.68 $1,091.06
3/0 $2,114.13 $2,510.01 N/S N/S N/S N/S
5/0 N/A $2,114.13 N/A N/S N/A $2,510.01 N/A $2,064.61 N/A $2,064.61
5/4 N/A $2,114.13 N/A $2,460.42 N/A $2,510.01 N/A $2,064.61 N/A $2,064.61
6/0 N/A 7/0 HEIGHTS N/A $2,460.42 N/A N/A N/A
N/S N/S
CODES NF944_ _70 EXTWOOD NF662_ _70 EXTWOOD
2/8 N/S $890.63 $1,222.09 Doors Must be Finished All 6 SIDES or
3/0 N/S $890.63 $1,222.09 the Warranty will be VOID.
5/4 $717.43 $1,048.89 N/A $2,792.25
6/0 N/A N/A $2,792.25
N/A N/S
$2,445.84
March 19, 2019 Prices Subject to Change without Notice F-14
1-3/4” FIR EXTERIOR
BEVELLED IG GLASS
Specifications:
All Panels are “Split-Proof” 1-1/8” Raised Panel
Stile Width is 4.5” (includes the sticking)
Top Rail is 4-3/8”
Bottom Rails are 9-1/4”
Sidelite Stiles for 1/0’s are 2”
and 1/2 are 3” (includes sticking)
Door units hung on 4-5/8" primed jambs
Ovolo sticking
Door units hung on Primed Framesaver with
Primed FJ BM
#543 9 Lite 1 Panel Door Only #1843 9 Lite 1 Panel Sidelite*
Door Only
Code: NF543_ _ NF1843_ _
Size: Price Size: Price:
3/0 x 6/8 $1,523.17 1/0 x 6/8 $921.14
1/2 x 6/8 $921.14
Door Unit
Code: EXTWOOD EXTWOOD
Size: Price: Size: Price:
3/0 x 6/8 1/0 x 6/8
6/0 x 6/8 $1,822.55 1/2 x 6/8 $1,054.20
$3,972.99 $1,054.20
Doors Must Be Finished All 6 SIDES or The
Warranty Will Be VOID.
March 19, 2019 Prices Subject to Change without Notice F-15
1-3/4” IG GLASS DOORS
Code WG6620 EXTWOOD 8/0 HEIGHTS
Size 6/8 Height Door Unit WG6628 18 LITE DOOR
2/0 x 6/8 WG6620_ _
2/6 x 6/8 Door Only $836.75 DR ONLY DR UNIT
2/8 x 6/8 $537.37 $864.43
3/0 x 6/8 $565.05 $864.43 CODES WG6626_ _ EXTWOOD
4/0 x 6/8 $565.05 $864.43 WG6628_ _
5/0 x 6/8 $565.05 $2,001.37 SIZE
5/4 x 6/8 $2,056.74 2/0 $1,096.86 $1,428.32
6/0 x 6/8 NA $2,056.74 2/6 $1,152.25 $1,483.701
$2,056.74 2/8 $1,174.41 $1,505.87
Code NA 2/10
2/0 x 7/0 EXTWOOD 3/0 NS NS
2/6 x 7/0 NA 4/0 $1,174.41 $1,505.87
2/8 x 7/0 NA $979.62 5/0 $3,406.65
3/0 x 7/0 7/0 Height $979.62 5/4 NA $3,517.45
4/0 x 7/0 WG6620_ _70 $979.62 6/0 $3,561.77
5/0 x 7/0 NA $3,561.77
5/4 x 7/0 $648.16 NS
6/0 x 7/0 $648.16 $2,307.30 NA
648.16 $2,307.30
Code $2,307.30 NA
2/0 x 8/0 NA
2/6 x 8/0 NA EXTWOOD
2/8 x 8/0 NA $1,035.02
3/0 x 8/0 NA $1,062.70
4/0 x 8/0 8/0 Height $1,062.70
5/0 x 8/0 WG6620_ _80 $1,062.70
5/4 x 8/0 $703.56 $2,620.05
6/0 x 8/0 $731.24 $2,675.42
$731.24 $2,675.42
March 19, 2019 $731.24 $2,675.42
NA
NA
NA
NA
Prices Subject to Change without Notice F-17
1-3/4”WHITE PINE 6 PANEL DOORS
15/16” GUARANTEED PANELS
Code WG110 EXTWOOD
Size 6/8 Height Door Unit
2/0 x 6/8 WG110_ _
2/6 x 6/8 Door Only NS
2/8 x 6/8 $1,517.63
3/0 x 6/8 NS $1,517.63
4/0 x 6/8 $1,218.25 $1,561.51
5/0 x 6/8 $1,218.25
5/4 x 6/8 $1,262.13 NA
6/0 x 6/8 $3,363.15
NA $3,363.15
Specifications: Code NA $3,450.89
2/0 x 7/0 NA
6/8 & 8/0 Top Rail 4-9/16” 2/6 x 7/0 NA EXTWOOD
6/8 & 8/0 Bottom Rail 9” 2/8 x 7/0 NS
7/0 Top Rail 6-9/16” 3/0 x 7/0 7/0 Height NS
7/0 Bottom Rail 11” 4/0 x 7/0 WG1103070 NS
Stiles 4-9/16” (includes the sticking) 5/0 x 7/0
Ovolo Sticking 5/4 x 7/0 NS $1,632.57
Hung on Primed Framesaver with 6/0 x 7/0 NS NS
Primed FJ BM NS NS
$1,301.11 NS
Code NA
2/0 x 8/0 NA $3,613.20
2/6 x 8/0 NA
2/8 x 8/0 NA EXTWOOD
3/0 x 8/0 NS
4/0 x 8/0 8/0 Height NS
5/0 x 8/0 WG1103080 NS
5/4 x 8/0
6/0 x 8/0 NS $1,730.03
NS NS
NS NS
$1,398.57 NS
NA
NA $4,010.08
NA
NA
March 19, 2019 Prices Subject to Change without Notice F-18
IN SASH FIR EXTERIOR TRANSOMS
In Sash Exterior Fir Transoms 1 Lite & True Divided Lite
In Sash Transoms
•1-1/4” Wide Muntin Bars
•1-3/8” Vertical Grain Fir
•1/2” Insulated Glass
•True Divided Lite
Single Door Unit Opening - In Sash - 1-3/8”Vertical Grain Fir
Sash Stiles Codes: Add to Door R.O. TDL Lite List # Of One Lite List
Height Price Lites Price
$649.78 $562.41
2/8 x 12” 4-1/2” TSF3212TDL TSF3212 14” $649.78 3 $573.33
3
3/0 x 12” 4-1/2” TSF3612TDL TSF3612 14”
Double Door Unit Opening - In Sash - 1-3/8”Vertical Grain Fir
Sash Stiles Codes: Add to Door R.O. TDL Lite List # Of One Lite List
Height Price Lites Price
$660.70 $584.25
4/0 x 12” 3-1/2” TSF4812TDL TSF4812 14” $693.46 4 $638.86
$693.46 5 $671.62
5/0 x 12” 4-1/2” TSF6012TDL TSF6012 14” $1,064.76 5 $693.46
5
5/4 x 12” 4-1/2” TSF6412TDL TSF6412 14”
6/0 x 12” 4-1/2” TSF7212TDL TSF7212 14”
Single Door Unit Opening with 2 Sidelite Opening - In Sash - 1-3/8”Vertical Grain Fir
Sash Stiles Add to Door R.O. Codes: TDL Lite List # Of Lites Codes: One Lite
Height TSF6412TDL Price 4 List Price
$693.46 TSF6412 $671.62
1/0 x 3/0 x 1/0 x 12” 4-1/2” 14” TSF6712 $693.46
1/2 x 3/0 x 1/2 x 12” 3-1/2” 14” TSF6712TDL $1,064.76 5
March 19, 2019 Prices Subject to Change without Notice F-19
DIRECT SET TRANSOM
4-9/16 PRIMED FRAME & 2” BRICKMOLD CASING
INSULATED GLASS
Rectangular - GBG - Direct Set
Glass Size List Price # of Lites Add for 6-9/16” Jamb Add to R.O. Transom Standard Specs
Extensions (Installed) Height 4-5/8" Primed Framesaver
2/6 x 12” 162.00 3 14”
2/8 x 12” 162.00 3 59.40 14” 2” Brickmould casing 1/2”
3/0 x 12” 162.00 3 59.40 14” Insulated Glass
5/0 x 12” (Twin) 297.00 5 59.40 14”
5/0 x 12” (Swing Set) 297.00 5 59.40 14” Direct Set Transoms
6/0 x 12” (Twin) 297.00 5 59.40 14” 5/8” Flat Muntin Bars
6/0 x 12” (Swing Set) 297.00 5 59.40 14”
1/0 x 3/0 x 1/2 x 12” 297.00 5 59.40 14”
59.40
Rectangular - 1 Lite - Direct Set
Glass Size List Price Add for 6-9/16” Jamb Add to R.O. Height
Extensions (Installed)
2/6 x 12” 140.40 14”
2/8 x 12” 140.40 54.00 14”
3/0 x 12” 140.40 54.00 14”
5/0 x 12” (Twin) 248.40 54.00 14”
5/0 x 12” (Swing Set) 248.40 54.00 14”
6/0 x 12” (Twin) 248.40 54.00 14”
6/0 x 12” (Swing Set) 248.40 54.00 14”
1/0 x 3/0 x 1/0 x 12” 248.40 54.00 14”
54.00
Elliptical and 1/2 Round GBG 4-9/16 Envirogard PVC Frame & 2” Brickmould - Direct Set
Glass Size Codes For List Price # of Lites Add for 6-9/16” Jamb Codes For Add to R.O.
Transoms Extensions (Installed) Extensions Height
1/0x3/0x1/0 EL103010GB 1032.50 5 Spoke 149.05 EL103010EX 14”
Elliptical (7 Lite)
1/0x3/0x1/0 HR103010GB 892.10 5 Spoke 144.75 HR103010EX 33-1/2”
1/2 Round Open Hub
(7 Lite)
3/0 HR30GBG 408.25 3 Spoke 103.70 HR30EX 20”
1/2 Round Open Hub
(5 Lite)
March 19, 2019 Prices Subject to Change without Notice F-20
2019 Wood Exterior Doors
Prefinishing Costs
Prefinished Door Sidelight Single Single Double Double Patio Single Single Double Double
Panel Panel Door Sidelight Sidelight Door Door
Exterior Wood Doors Only Only Unit Unit Unit Door Sidelight Sidelight Door
Unit Unit
Combinations (Non- Torrified) $1,742 Unit w/ Unit w/ Unit w/ Unit w/
$1,858
Stain $610 $306 $948 $1,352 $1,744 $1,686 $1,902 Transom Transom Transom Transom
$610 $306 $1,054 $1,468 $1,860 $1,802 $2,018
One Door Color / One Frame Color $690 $366 $1,028 $1,492 $1,944 $1,846 Patio $1,218 $1,630 $2,024 $1,964
One Door Color / Two Frame Colors $690 $366 $1,134 $1,608 $2,060 $1,962 Door $1,324 $1,746 $2,140 $2,080
Two Door Colors / One Frame Color Door Sidelight Single Single Double Double $1,298 $1,770 $2,224 $2,124
Two Door Colors / Two Frame Colors Panel Panel Door Sidelight Sidelight Door Unit $1,404 $1,886 $2,340 $2,240
Only Only
Prefinished Unit Unit Unit Unit $1,906 Single Single Double Double
Exterior Torrified Wood Doors $2,022 Door Sidelight Sidelight Door
$692 $346 $1,032 $1,476 $1,910 $1,850 $2,066 Unit w/ Unit w/ Unit w/ Unit w/
Combinations $692 $346 $1,138 $1,592 $2,026 $1,966 $2,182 Transom Transom Transom
Stain $772 $406 $1,112 $1,616 $2,110 $2,010 Patio $1,300 Transom
$772 $406 $1,218 $1,732 $2,226 $2,126 Door $1,410 $1,754 $2,188 $2,130
One Door Color / One Frame Color Door Sidelight Single Single Double Double $1,380 $1,870 $2,304 $2,246
One Door Color / Two Frame Colors Panel Panel Door Sidelight Sidelight Door Unit $1,490 $1,894 $2,388 $2,290
Two Door Colors / One Frame Color Only Only $2,010 $2,504 $2,406
Two Door Colors / Two Frame Colors Unit Unit Unit Unit $1,610 Single
$1,726 Door Single Double Double
Prefinished $548 $274 $880 $1,250 $1,610 $1,554 $1,770 Unit w/ Sidelight Sidelight Door
Exterior Wood Doors $548 $274 $986 $1,366 $1,726 $1,670 $1,886 Transom Unit w/ Unit w/ Unit w/
Combinations Torrified & Non Torrified $628 $334 $960 $1,390 $1,810 $1,714 Patio $1,102 Transom Transom
$628 $334 $1,066 $1,506 $1,926 $1,830 Door $1,212 Transom
Paint Door Sidelight Single Single Double Double $1,182 $1,482 $1,842 $1,786
One Door Color / One Frame Color Panel Panel Door Sidelight Sidelight Door Unit $1,292 $1,602 $1,962 $1,906
One Door Color / Two Frame Colors Only Only Unit $1,622 $2,042 $1,946
Two Door Colors / One Frame Color Unit Unit Unit $1,488 Single $1,742 $2,162 $2,066
Two Door Colors / Two Frame Colors Patio Door
$502 $250 $814 $1,154 $1,484 $1,432 Door Unit w/ Single Double Double
Prefinished Unit Transom Sidelight Sidelight Door
Exterior Wood Doors Door Sidelight Single Single Double Double $1,064 Unit w/ Unit w/ Unit w/
Panel Panel Door Sidelight Sidelight Door $1,596 Transom Transom
Combinations Only Only Unit Unit Single Transom
Clear Coat Unit Unit Door $1,414 $1,744 $1,690
Unit w/
One Door Color / One Frame Color $584 $292 $896 $1,278 $1,650 $1,652 Transom Single Double Double
Prefinished $1,146 Sidelight Sidelight Door
Unit w/ Unit w/ Unit w/
Exterior Wood Doors Transom Transom
Combinations Torrified Transom
$1,538 $1,910 $1,912
Clear Coat
One Door Color / One Frame Color
Additional Options Technical Information
See BWI Color Card for Standard Color Options
7/0 & 8/0 Doors Add 10% Prefinished Color Sample for sign off recommended
Custom Color Sign off Required
Clear Coat & Apply Storm Door Adaptor $46
Exterior Door Disclaimer Sign off is required
Stain & Apply Storm Door Adaptor $70
Define Split finish for Inswing / Outswing Applications
Clear Coat and Apply Dentil Shelf $92
Both Inswing & Outswing edges are interior color
Stain and Apply Dentil Shelf $116
Custom Paint and Stain Options Available on Request
Custom Sherwin Williams Color $146
Custom Non Sherwin Williams Color $292
Lead Times
In-Stock Colors and Components - 2 Weeks
Non Stock Components-4-6 Weeks Torrified 6-8 Weeks
Custom Colors and Components - 4-6 Weeks
Custom Colors require a sample and Customer Sign off.
BWI Does Not Warranty the Finish on Wood Doors or Wood Frames
Customer Service: 503.357.7181 Woodfold Accordion Doors / Zone 2
Email: [email protected] Accordion Door Guide
for Commercial and Effective JAN. 1, 2019
Residential Installations
Suggested List Prices / Freight Prepaid
Detailed Architectural All Contiguous States (except California, Oregon & Washington)
Shop Drawings Available
Standard and Optional Features Series: 140 220 240 440 540 640 740 2100 3300
STD STD STD STD STD STD STD STD STD
Continuous Pin-Hinge Hardware System, Top and Bottom STD STD — — — — — — —
— — STD STD STD STD STD STD STD
Full-Length Sweptwing Handle with Magnet STD STD STD — — — — STD STD
— — — STD — — — — —
Aluminum Lead Post — — — — — STD — — —
— — — — STD — — — —
Flexible Vinyl Panel Connector Inserted Directly into Panels — — — — — — STD — —
STD STD — — — — — — —
Flexible Vinyl Panel Connector Inserted into Aluminum Side Channel OPT OPT STD STD STD STD STD STD STD
STD STD STD STD STD STD STD STD STD
Flexible Vinyl Panel Connector Inserted Solid Aluminum Panels OPT OPT OPT OPT OPT OPT OPT — OPT
— — OPT OPT OPT OPT OPT — —
Rigid Vinyl Panel Connector Inserted Into Aluminum Side Channel STD STD OPT OPT OPT OPT OPT OPT OPT
— — STD STD OPT STD OPT STD STD
Rigid Vinyl Panel Connector Inserted Into Solid Aluminum Panels — — OPT OPT STD OPT STD OPT OPT
— — OPT OPT OPT OPT OPT OPT OPT
Nylon Wheel on Lexan Axle — — OPT OPT OPT OPT OPT OPT OPT
— OPT OPT OPT OPT — — OPT OPT
Nylon Wheel with Ball Bearings on Steel Axle
Aluminum Track
Recessed Track Channel
Curvable Track
Magnetic Catch and Strike Plate
Deadlatch with Thumb Turn Two Sides
Keylock Two Side
May Be Paired
Sliding Jamb Option
Class 1 Fire Retardant Panels (Light Oak and Chalk Vinyl-Lam Only)
Measuring Width and Height Woodfold
order
List finished opening sizes. (A) Width: Finished wall-to-wall (or jamb) in feet and inches, e.g. 10'–5" x 7'–10"; (B) Height: From surface forms
where track attaches to finished floor or top of carpet. See Page 4—drawings show how to measure height for each type of track. available
NOTE: For those areas where the floor is uneven (e.g. concrete floors) please take 3 or 4 height measurements along the floor. Use the
shortest measurement as the finished opening height except 2100 or 3300.
Prepaid Freight Program All prices shown in this price list include Custom sizes are our specialty
freight for Zone 2—all contiguous states except California, Oregon & Washington.
Custom Order Information
Production Schedule: All Series with factory standard finishes, 2 weeks (up to 250
lineal feet; over 250 lineal feet, subject to manufacturers schedule at time of order). All Woodfold doors are custom made. We allow 9/16"
All doors with special finish, after signed approval acknowledgment received, 3 weeks. clearance for doors over 4' high, 5/16" for doors 4' and less.
Beware of variations in floor and/or ceiling surfaces of more
Rush service: Please contact office for details. than 3/4". Please contact us for more information.
Special finishes procedure: With your order please send
In-transit time: Please allow a 7 to 10 day normal in-transit time for delivery. stained wood sample or paint chip to be matched by Woodfold.
Upon receiving this sample we will return a factory color-
Hanging Height Series 140, 220, Series 440, 540, Series matched sample along with an acknowledgment copy.
door weights 6-8 240, 2 100 640,740 3300 Acknowledgment is to be returned with your signature
(lbs. per lineal foot): 8-0 10 — approving the color match. By using the special finish
10-0 12 13 — procedure to color match to your customer requirements, the
Contact Customer Service 12-0 15 16 26 special finish cost will be less than preparing an unfinished
for shipping weight 18 N/A 32 door for finishing at the job site.
38
Unfinished doors are not guaranteed
Shipments to non-commercial addresses: Additional charges apply for Series 3300 is not available unfinished
non-commercial delivery and pre-delivery notification. Contact office for questions.
Woodfold finishing processes are environmentally safe
Special note: In case of freight damage documented with signed bill of lading,
please contact our office. Woodfold will process freight claim.
Woodfold Accordion Doors / Zone 2 • Customer Service: 503.357.7181 or [email protected] Page 1
Residential Series 140 Freight Prepaid The Accordion Door That:
• Is FULLY Guaranteed
Closet Folding Doors—Faced One Side Only Left Stack • STACKS in Minimum Space
Right Stack • STAYS PUT in Open and Closed Position
• Order must specify left-or right-hand stack. • Has Exclusive Pin-Hinge Hardware
• Not available as pairs
• When pairs are required, use Series 240. Top and Bottom for Added Strength
Series 140 Specifications Wheels: Nylon wheels on Lexan axles.
Panels: 4'-1/4" wide. Vinyl panel connectors:
Supplied as standard—
Factory finished hardwoods:
For visual warmth, hardwood veneers White with White, Chalk, and Amethyst.
laminated to MDF board (1/4" net) with
non-tinted finish. Good one side. Sand with Hardwoods: Oak, Birch, Maple,
Alder; and Vinyls: Natural Oak, Birch, Tan,
Vinyl-Lam: Wood grains, white, tan, gray, Tahiti, Rattan, Maple.
or 2-tone textured vinyl laminated to MDF
board (1/4" net), faced one side only. Gray with Gray Vinyl.
Catch: Magnet with strike plate. Brown with all other body panels.
Widths: Up to 8'. (note: For closet Stacking space: 1-1/4" per foot plus
enclosures more than 8' wide, use Series 7/8" for sweptwing handle.
240 with closet-back option, page 5).
Note: Not available with curved track.
Heights: Up to 8'-1".
List Price Schedule (Price to next full foot width and height) Series 140 Options
Use for Custom Series 140V Series 140H • Custom-size doors .... no additional charge
and Stock Sizes Vinyl-Lam Natural Hardwoods Use price for next larger width and height shown;
see Page 1 for providing custom-size details.
Finished Openings Birch, Cherry, Maple, Walnut, Birch Factory Finished
up to Natural Oak, Light Oak, Alder* • Heights 4' and less ......................... less 20%
Dark Oak, Mahogany, White, Use 8-0 height price.
Width x Chalk, Tan, Gray, Black,* Cherry Mahogany
Height Teak, Tahiti, Rattan, Amethyst Oak Walnut Maple • Double end .............................................. $20
Single door with sweptwing handle both ends.
Heights 2-0 x 6-8 256 432 438 568 498
up to 3-0 x 6-8 384 648 657 852 747 • Not available with keylocks or privacy
6'-10" 4-0 x 6-8 512 864 876 1,136 996 latches (for these options, use Series
5-0 x 6-8 640 1,080 1,095 1,420 1,245 240 with closet back).
No Extra 6-0 x 6-8 768 1,296 1,314 1,704 1,494
Charge 7-0 x 6-8 896 1,512 1,533 1,988 1,743 • Special paint and stain ................. $40 lin. ft.
Heights 8-0 x 6-8 1,024 1,728 1,752 2,272 1,992 $100 minimum. Note: For custom
up to 2-0 x 8-0 286 480 486 626 552 paint finish, use wood grain vinyl
8'-1" 3-0 x 8-0 429 720 729 939 828 price base (MDF board with paper
No Extra 4-0 x 8-0 572 960 972 1,252 1,104 overlay used for paint finish). For
Charge 5-0 x 8-0 715 1,200 1,215 1,565 1,380 stain finish, use wood-species base
6-0 x 8-0 858 1,440 1,458 1,878 1,656 price. See front cover for details.
7-0 x 8-0 1,001 1,680 1,701 2,191 1,932
8-0 x 8-0 1,144 1,920 1,944 2,504 2,208 • Fire-retardancy ....................................... N/A
Panels with fire-retardant core not
available in Series 140. Please refer
to options for Series 220 and 240.
Maximum size for Series 140: 8-0 x 8-1 *Black and Alder available only up to 8-1
Series 140 with full-length sweptwing handle with integral magnet and steel hardware hinge (top view).
Note: The first body panel acts as lead panel.
Woodfold Accordion Doors / Zone 2 • Customer Service: 503.357.7181 or [email protected] Page 2
Residential Series 220 Freight Prepaid How To Order
(Custom Sizes Our Specialty)
Room Dividers and Passageway Doors
1) WIDTH: Finished wall-to-wall (or jamb)
• Not available as pairs. Left Stack in feet and inches.
• When pairs are required, use Series 240. Right Stack
• Built left-hand stack unless otherwise specified. 2) HEIGHT: Surface where track attaches
to finished floor or top of carpet in feet
Series 220 Specifications Wheels: Nylon wheels on Lexan axles. and inches.
Panels: 4-1/4" wide. Vinyl panel connectors: 3) SERIES: List number of series
Supplied as standard— to be ordered.
Factory finished hardwoods:
For visual warmth, hardwood veneers White with White, Chalk, and Amethyst. 4) PANEL: List wood species or
laminated to MDF board (1/4" net) with vinyl-lam color.
non-tinted finish. Sand with Hardwoods: Oak, Birch, Maple,
Alder; and Vinyls: Natural Oak, Birch, Tan, 5) OPTIONS: List options if required.
Vinyl-Lam: Wood grains, white, tan, Tahiti, Rattan, Maple.
gray, or 2-tone textured vinyl laminated
to MDF board (1/4" net). Gray with Gray Vinyl.
Catch: Magnet with strike plate Brown with all other body panels.
Widths: Up to 8'. (Note: For room dividers Stacking space: 1-1/4" per foot plus
more than 8' wide, use Series 240, Page 5). 7/8" for sweptwing handle.
Heights: Up to 8'-1". Note: Not available with curved track.
List Price Schedule (Price to next full foot width and height) Series 220 Options
Use for Custom Series 220V Series 220H • Custom-size doors .... no additional charge
and Stock Sizes Vinyl-Lam Natural Hardwoods Use price for next larger width and height shown;
see Page 1 for providing custom-size details.
Finished Openings Birch, Cherry, Maple, Walnut, Birch Factory Finished
up to Natural Oak, Light Oak, Alder* • Heights 4' and less ......................... less 20%
Dark Oak, Mahogany, White, Use 8-0 height price.
Width x Chalk, Tan, Gray, Black,* Cherry Mahogany
Height Teak, Tahiti, Rattan, Amethyst Oak Walnut Maple • Double end .............................................. $20
Single door with sweptwing handle both ends.
Heights 2-0 x 6-8 274 452 460 598 524
up to 3-0 x 6-8 411 678 690 897 786 • Not available with keylocks or privacy latches
6'-10" 4-0 x 6-8 548 904 920 1,196 1,048 (for these options, use Series 240).
5-0 x 6-8 685 1,130 1,150 1,495 1,310
No Extra 6-0 x 6-8 822 1,356 1,380 1,794 1,572 • Special paint and stain .................$40 lin. ft.
Charge 7-0 x 6-8 959 1,582 1,610 2,093 1,834 $100 minimum. Note: For custom
Heights 8-0 x 6-8 1,096 1,808 1,840 2,392 2,096 paint finish, use wood grain vinyl
up to 2-0 x 8-0 304 500 510 658 578 price base (MDF board with paper
8'-1" 3-0 x 8-0 456 750 765 987 867 overlay used for paint finish). For
No Extra 4-0 x 8-0 608 1,000 1,020 1,316 1,156 stain finish, use wood-species base
Charge 5-0 x 8-0 760 1,250 1,275 1,645 1,445 price. See front cover for details.
6-0 x 8-0 912 1,500 1,530 1,974 1,734
7-0 x 8-0 1,064 1,750 1,785 2,303 2,023 • Fire-retardancy ............................... add 40%
8-0 x 8-0 1,216 2,000 2,040 2,632 2,312 Panels with Class 1 fire-retardant core.
Available in light oak and chalk vinyl-lam only.
Maximum size for Series 220: 8-0 x 8-1 *Black and Alder available only up to 8-1
Series 220 with full-length sweptwing handle with integral magnet and steel hardware hinge (top view).
Note: The first body panel acts as lead panel.
Woodfold Accordion Doors / Zone 2 • Customer Service: 503.357.7181 or [email protected] Page 3
Construction Details Series 240, 440, 540, 640, 740
Standard Surface Track Stack Dimensions Lead Post
Pan head screw supplied
by manufacturer or equivalent
Surface where track is attached
Finished STEEL HINGE SYSTEM Stacks: 1-1/4" per foot of door,
Opening BODY PANEL plus 2-3/4" for Lead Panel
Height: unless sliding jamb used.
Mounting Panel
We
Suggest Door Types Right Hand
Single: Left Hand
Field
Measure
STEEL HINGE SYSTEM Pair: Left Hand Right Hand Mounting
SPECIAL NOTE: for counter doors Double End Panel (Jamb)
nominal (height of 4' or less) clearance is 5/16"
Finished Floor, i.e., carpet or other surface
For floor clearance other than above, please specify Jamb panels may orient into or out of room based on
number of panels in door. Applies to all series except 3300.
Option Details Series 240, 440, 540, 640, 740 Woodfold Customer Service:
503.357.7181 / [email protected]
Locking Hardware Intermediate Recessed Track Curvable Track
Rolling Post
Not applicable to 2100 Pan head screw supplied by Curvable at job site Ceiling clips
Aluminum manufacturer or equivalent to 12" minimum radius 1/2"wide, typically
placed 12" apart
Ceiling Tile Surface where track is attached
“Hat” Channel STEEL HINGE SYSTEM Not recommended
Finished Body Panel for recessed installation
Opening
Height is STEEL HINGE SYSTEM
to TOP
of Track
Front View Finished Body Panel
Opening
Thumb Pull with Top View without Height:
Turn Cylinder Wheel Assembly
Each half of the post We
• Deadlatch applied to section of Suggest
Deadlatch with thumb turn two sides Room Divider at plant.
Fastening of sections at Field
• Keylock 1 Side job site with screws and Measure
Deadlatch with thumb turn one side, posts supplied.
keylock one side STEEL HINGE SYSTEM nominal STEEL HINGE SYSTEM
Special Note: For counter doors Special Note: For counter doors
• Keylock 2 Sides nominal (height or 4' or less) clearance is 5/16" (height or 4' or less) clearance is 5/16"
Deadlatch with keylock 2 sides Finished floor, i.e., carpet or other surface
Custom Keying Information
Woodfold furnishes Weiser, Schlage, For floor clearance other than above, please specify
and a construction best cylinder.
Finished floor, i.e., carpet or other surface
For floor clearance other than above, please specify
Sliding Varies depending Edge of stop considered Multiple Up to four way use
Jamb Option on stack size to be finished opening Meeting of jamb mold in
* Stop by Others Options place of handle on
Pocket Depth sides of lead panel
1–1/4" per ft.
of door +7"
Stop by Others Primary lead post
with auxiliary jamb
moldings
* May be cut to a minimum of 6–1/2" in the field Page 4
Commercial Series 240 Freight How To Order
Prepaid (Custom Sizes Our Specialty)
Room Dividers and Passageway Doors
1) WIDTH: Finished wall-to-wall (or jamb) in feet
Series 240 Specifications Heights: Up to 12'-1" on vinyl and and inches.
10'-1" on hardwood.
Panels: 4-1/4" wide. 2) HEIGHT: Surface where track attaches to fin-
Vinyl panel connectors: ished floor or top of carpet in feet and inches.
Factory finished hardwoods: Supplied as standard—
For visual warmth, hardwood veneers 3) SERIES: List number of series to be ordered.
laminated to MDF board (1/4" net) with White with White, Chalk, and Amethyst.
non-tinted finish. 4) PANEL: List wood species or vinyl-lam color.
Sand with Hardwoods: Oak, Birch, Maple,
Vinyl-Lam: Wood grains, white, tan, Alder; and Vinyls: Natural Oak, Birch, Tan, 5) OPTIONS: List options if required.
gray, or 2-tone textured vinyl laminated Tahiti, Rattan, Maple.
to MDF board (1/4" net). Series 240 Options
Gray with Gray Vinyl.
Lead Post: 3/4" x 2-3/4" aluminum with • Custom-sizes .............. no additional charge
ball-bearing rollers. Brown with all other body panels. • Heights 4' and less .......................... less 20%
Latch: Deadlatch with thumb turn two sides. Wheels: Ball-bearing nylon wheels Use 8-0 height price.
on steel axles. • Made as pairs ........................................... $40
Widths: No limitation. • Double end lead post ............................... $40
Stacking space: 1-1/4" per foot plus • Intermediate rolling post ........................ $60
2-3/4" for lead post.
For sectioning extra-wide dividers and to provide
List Price Schedule (Price to next full foot width and height) a surface to attach foot-bolt. See Page 4.
• Closet backs on Series 240 ........... Less 10%
Use for Custom Series 240V Series 240H Order right or left hand. Available up to 8'1" height.
and Stock Sizes Vinyl-Lam Natural Hardwoods • Unfinished doors
Not guaranteed. Use finished door prices.
Finished Openings Birch, Cherry, Maple, Walnut, Factory Finished • Special paint and stain ...................$40 lin. ft.
up to Natural Oak, Light Oak, $100 minimum. Note: For custom paint finish,
Dark Oak, Mahogany, White, use wood grain vinyl price base (MDF board
Width x Chalk, Tan, Gray, Black,* Birch Oak Cherry Alder* with paper overlay used for paint finish). For
Height Teak, Tahiti, Rattan, Amethyst Walnut Mahogany stain finish, use wood-species base price.
528 534 See front cover for details.
Heights 2-0 x 6-8 332 792 801 684 Maple • Custom decorative laminate doors
up to 3-0 x 6-8 498 1,056 1,068 1,026 Contact office for quotation.
6'10" 4-0 x 6-8 664 1,320 1,335 1,368 604 • Magnet with strike plate ....................... N/C
5-0 x 6-8 830 1,584 1,602 1,710 906 • Thumb turn two sides ............................. STD
No Extra 6-0 x 6-8 996 1,848 1,869 2,052 1,208 Deadlatch with thumb turn two sides.
Charge 7-0 x 6-8 1,162 2,112 2,136 2,394 1,510 • Thumb turn one side ................................ N/C
8-0 x 6-8 1,328 2,376 2,403 2,736 1,812 Deadlatch with thumb turn one side.
Heights 9-0 x 6-8 1,494 2,640 2,670 3,078 2,114 • Keylock 1 side (Weiser or Schlage cylinder) ... $60
up to 10-0 x 6-8 1,660 3,420 2,416 • Keylock 1 side (Best cylinder pull w core) .... $120
2,718 Deadlatch with thumb turn one side.
8'1" No 166 lin. ft. 3,020 • Keylock 2 sides (Weiser or Schlage cylinder) $120
Extra • Keylock 2 sides (Best cylinder pull w core) .... $240
Use linear foot price 990 264 lin. ft. 267 lin. ft. 342 lin. ft. 302 lin. ft. Deadlatch with keylock two sides.
Charge list for all other widths 1,188 • Non-locking foot-bolt ................................ $36
1,386 • Foot-bolt with spring pull ......................... $72
Heights 5-0 x 8-0 1,584 1,490 1,505 1,900 1,695 • Locking foot-bolts ...................................... $76
up to 6-0 x 8-0 1,782 1,788 1,806 2,280 2,034 • Double locking foot-bolts ....................... $152
7-0 x 8-0 1,980 2,086 2,107 2,660 2,373 • Recessed hat channel ........................ $ 8 lin. ft.
10'1" No 8-0 x 8-0 2,178 2,384 2,408 3,040 2,712 Measure to top of track.
Extra 9-0 x 8-0 2,376 2,682 2,709 3,420 3,051 • Curvable “I” beam track ................. $16 lin. ft.
10-0 x 8-0 2,574 2,980 3,010 3,800 3,390 • Sliding jamb panel ...................................... $60
Charge 11-0 x 8-0 3,278 3,311 4,180 3,729 • Fire-retardancy ................................ add 40%
12-0 x 8-0 198 lin. ft. 3,576 3,612 4,560 4,068 Panels with Class 1 fire-retardant core.
Heights 13-0 x 8-0 3,874 3,913 4,940 4,407 Available in light oak and chalk vinyl-lam only
up to 2,430 (closet back not available with firecore).
Use linear foot price 2,673 298 lin. ft. 301 lin. ft. 380 lin. ft. 339 lin. ft.
12'1" No list for all other widths 2,916 Page 5
Extra 3,159
10-0 x 10-0 3,402 3,750 3,750 4,890 4,750
Charge 11-0 x 10-0 3,645 4,125 4,125 5,379 5,225
12-0 x 10-0 4,500 4,500 5,868 5,700
13-0 x 10-0 243 lin. ft. 4,875 4,875 6,357 6,175
14-0 x 10-0 5,250 5,250 6,846 6,650
15-0 x 10-0 3,804 5,625 5,625 7,335 7,125
4,121
Use linear foot price 4,438 375 lin. ft. 375 lin. ft. 489 lin. ft. 475 lin. ft.
list for all other widths 4,755
12-0 x 12-0 317 lin. ft. Note: Hardwoods not available
13-0 x 12-0 in heights over 10-1
14-0 x 12-0
15-0 x 12-0 *Black and Alder available only up to 8-1
Use linear foot price
list for all other widths
Woodfold Accordion Doors / Zone 2 • Customer Service: 503.357.7181 or [email protected]
Visifold Series 440/540 Freight Prepaid Combination doors:
Series 240 may be combined with either Series
Acrylic Panel Dividers 440 or 640. To price combinations, use the
applicable price list for each portion of the door.
Series 440/540 Specifications A diagram must be supplied noting location of
each series.
Aluminum panel frame channels: Wheels:
Ball-bearing nylon wheels on steel axles. Gold finish option:
Clear finish* 440C 540C Series 440 and 540 may be ordered with steel
White finish* 440W 540W Latch: hinge hardware, aluminum components, and vinyl
Bronze finish** 440B 540B extrusions finished in a gold color. Add 20%.
Sand finish** 440S 540S Series 440—Deadlatch with
thumb turn two sides. Series 440/640 Options
* Supplied with clear hinging and track.
** Supplied with bronze hinging and track. Series 540—Deadlatch with keylock Use Series 240 Option Prices on Page 5
turn two sides.
Panels: 4-1/4" wide.
Widths: No limitations.
Acrylic panels:
1/8" thick transparent clear or bronze. Heights: Up 10'-1".
Panel connectors: Stacking space: 1-1/4" per foot plus
2-3/4" for lead post.
Series 440—Extruded flexible vinyl.
Series 540—Rigid vinyl hinge profile
over steel rod.
List Price Schedule (Prices per lineal foot to the next full foot)
Clear Acrylic Panels - Bronze Acrylic Panels - Vinyl-Lam Panels
Series 440 Series 540 Hardwoods Series 540/740 Options
by quote
• Heights 4' and less .......................... less 20%
To 8'-1" height 364 408 Use 8-0 height price.
To 10'-1" height
456 556 • Made as pairs .......................................... $40
• Double-end lead post ............................ $ 110
Prices shown are per linear foot
Includes keylock 2 sides.
Alumifold Series 640/740 Freight Prepaid • Intermediate rolling post ....................... $60
Aluminum Panel Dividers For sectioning extra-wide store
enclosures and/or providing a
Series 640/740 Specifications Latch: surface for attaching security bolt.
• Keylock 2 sides (Weiser or Schlage cylinder) . STD
Panels construction: 4-1/4" wide aluminum Series 640—Deadlatch with • Keylock 2 sides (Best cylinder pull w core) ... $180
panels available in solid or perforated style. thumb turn two sides. Deadlatch with keylock two sides.
Frame channel is integral part of panel. • Pull rod ..................................................... $30
Series 740—Deadlatch with keylock • Locking foot bolts .................................... $76
Panel connectors: turn two sides. • Double locking foot-bolts
(floor to ceiling) ........................................... $152
Series 640—Extruded flexible vinyl. Widths: No limitations. • Non-locking foot-bolt ................................ $36
Series 740—Rigid vinyl hinge profile • Foot-bolt with spring pin ........................... $72
Heights: Up 10'-1". • Locking dust-proof strike ......................... $36
over steel rod. Normally inserted in floor to receive security bolt,
Stacking space: 1-1/4" per foot • Curvable “I” beam track .............. $16 lin. ft.
Wheels: plus 2-3/4" for lead post. • Sliding jamb panel ................................... $100
Ball-bearing nylon wheels on steel axles.
Page 6
List Price Schedule (Prices per lineal foot to the next full foot)
Series 640 Series 740
Solid / Perforated Solid / Perforated
Clear, Bronze, or Gold* to 8'-1" height 346 / 404 401 / 462
Clear only to 10'-1" height 450 / 546 520 / 618
*Add 20% for gold. Prices shown are per linear foot.
Woodfold Accordion Doors / Zone 2 • Customer Service: 503.357.7181 or [email protected]
Sound Rated Series 2100 Field Sound Transmission Freight Prepaid
Class (FSTC): 21
Acoustical Rating of FSTC 21 Series 2100 Options
Test performed by Bruck, Richards &
Chaudiere, Inc. ASTM designation E336-77 • Custom-sizes ........ no additional charge
• Heights 4' and less .................... less 20%
Series 2100 Specifications Vinyl panel connectors:
Panels: 4-1/4" wide. Supplied as standard— Use 8-0 height price.
Factory finished hardwoods: For visual warmth, White with White, Chalk, and Amethyst.
hardwood veneers laminated to MDF board (1/4" net) Sand with Hardwoods: Oak, Birch, Maple, Alder; and • Made as pairs ..................................... $ 40
with non-tinted finish. Vinyls: Natural Oak, Birch, Tan, Tahiti, Rattan, Maple. • Special paint and stain ............. $ 40 lin. ft.
Vinyl-Lam: wood grains, white, tan, gray, or 2-toned Gray with Gray Vinyl.
textured vinyl laminated to MDF board (1/4" net). Brown with all other body panels. $100 minimum. Note: For custom paint finish, use wood-grain vinyl
Stacking space: 1-1/4" per foot plus Wheels: Ball-bearing nylon wheels on steel axles. price base (MDF board with paper overlay used for paint finish). For
2-3/4" for lead post. Latch: Deadlatch with thumb turn two sides. stain finish, use wood-species base price. See front cover for details.
Molding: Supplied as standard. Note: Not available with curved track or
Widths: No limitation. recessed track channel. • Custom decorative laminate doors
Heights: Up 12'-1" on vinyl and 10'-1" on hardwood.
Contact office for quotation.
List Price Schedule (Prices per lineal foot to the next full foot)
• Keylock 1 side (Weiser or Schlage cylinder) ....... $60
Use for Custom Series 2100V Series 2100H • Keylock 1 side (Best cylinder pull w core) ...... . $120
and Stock Sizes Vinyl-Lam Natural Hardwoods
Deadlatch with thumb turn one side, keylock one side.
Finished Openings Birch, Cherry, Maple, Walnut, Factory Finished
up to Natural Oak, Light Oak, Dark Oak, • Keylock 2 sides (Weiser or Schlage cylinder)... $120
Mahogany, White, Chalk, Tan, Gray, Alder* • Keylock 2 sides (Best cylinder pull w core) ...... $240
Black,* Teak, Tahiti, Rattan, Amethyst Cherry Mahogany
Height Birch Oak Walnut Deadlatch with keylock two sides.
266 Maple
8'-1" 314 • Non-locking foot-bolt .......................... $36
Prices 10'-1" 413 392 394 475 436 • Double end lead post ......................... $72
shown are 12'-1" • Pull rod .................................................. $30
per lineal 483 480 598 565 • Intermediate rolling post (metal) ........... $60
foot Hardwoods not available in heights over 10'-1" *Available only in 8'-1" For sectioning extra-wide room dividers, and/or to provide
a surface for attaching foot-bolt. See detail Page 4.
Sound Rated Series 3300 Field Sound Transmission
Class (FSTC): 33 • Sliding jamb panel ............................. $100
Acoustical Rating of FSTC 33 • Fire-retardancy .......................... add 40%
Test performed by Bruck, Richards &
Chaudiere, Inc. ASTM designation E336-90 Panels with Class 1 fire-retardant core.
Available in light oak and chalk vinyl-lam only.
Series 3300 Specifications Vinyl panel connectors: Supplied as standard—
Factory finished hardwoods: White with White, Chalk, and Amethyst. Series 3300 Options
For visual warmth, hardwood veneers laminated Sand with Hardwoods: Oak, Birch, Maple, Alder; and
to MDF board (1/4" net) with non-tinted finish. Vinyls: Natural Oak, Birch, Tan, Tahiti, Rattan, Maple. • Custom-sizes ......... no additional charge
Vinyl-Lam: wood grains, white, tan, gray, or 2-toned Gray with Gray Vinyl. • Made as pairs ................................... $100
textured vinyl laminated to MDF board (1/4" net). Brown with all other body panels. • Special paint and stain ............ $ 60 lin. ft.
Widths: Individual section max. 15'; use Track: Clear aluminum with white wood moulding.
intermediate post for for wider openings. Stacking space: 2" per foot plus 4-1/2" for $100 minimum. Note: For custom paint finish, use wood-grain vinyl
Heights: Up 12'1" on vinyl and 10'1" lead post, 12-1/4" side to side. price base (MDF board with paper overlay used for paint finish). For
on hardwood. Note: Series 3300 not available unfinished stain finish, use wood-species base price. See front cover for details.
Latch: Deadlatch with thumb turn two sides. or with curved track.
Wheels: • Custom decorative laminate doors
1-1/8" ball-bearing nylon wheels on steel axles.
Contact office for quotation.
Flush Jamb Post Jamb
Must specify • Keylock 1 side (Weiser or Schlage cylinder)..... $60
Flush or • Keylock 1 side (Best cylinder pull w core) ....... $120
Post Mount
Deadlatch with thumb turn one side, keylock one side.
List Price Schedule (Prices per lineal foot to the next full foot)
• Keylock 2 sides (Weiser or Schlage cylinder)... $120
Use for Custom Series 3300V Series 3300H • Keylock 2 sides (Best cylinder pull w core) ...... $ 240
and Stock Sizes Vinyl-Lam Natural Hardwoods
Deadlatch with keylock two sides.
Finished Openings Birch, Cherry, Maple, Walnut, Factory Finished
up to Natural Oak, Light Oak, Dark Oak, • Non-locking foot-bolt .......................... $36
Mahogany, White, Chalk, Tan, Gray, Alder* • Pull rod .................................................. $30
Prices Height Black,* Teak, Tahiti, Rattan, Amethyst Birch Oak Cherry Mahogany • 2-piece aluminum ceiling
shown are Walnut
per lineal 8'-1" 651 908 856 Maple guard and track (Priced per linear foot)............ $ 20
10'-1" 759 1,098 1,078 1,072 • Sliding jamb ......................................... $150
foot 12'-1" 859 1,194 995 • Double end lead post ........................ $136
1,237 • Intermediate rolling post .................. $100
Hardwoods not available in heights over 10'-1" *Available only in 8'-1" For sectioning extra-wide room dividers,
providing a surface for attaching foot-bolt.
Woodfold Accordion Doors / Zone 2 • Customer Service: 503.357.7181 or [email protected]
• Fire-retardancy .......................... add 30%
Panels with Class 1 fire-retardant core.
Available in light oak and chalk vinyl-lam only.
Page 7
Woodfold Creative Made to fit your opening sizes
Decorative Options
Continuous pin-hinge hardware
SINCE 1957 top and bottom, heavy-duty track
Custom Decorative Laminate Panels
A Special Suggestion: When solid color laminates are specified,
we suggest providing an alternate quotation using our easy-clean
durable custom-paint finish.
A Woodfold Custom Service: Applying specified decorative
laminates to door panels. For quotation, please advise pattern
number and manufacturer such as:
Display and Sample Kits—Customized Samples Are Also Available
Vinyl Swatch Hardwood Swatch Color Chip Set—$8 Series 140—$40 Series 220—$40
Card— $ 2.50 Card— $ 2.50 Series 440—$40 Series 540—$40 Series 2100—$40
Freight
Prepaid
Series 240—$100 Series 640/740—$100 Series 3300—$150
Page 8
WOODFOLD MFG., INC. Distributed by:
1811 18th Ave.
Forest Grove, Oregon 97116
P: 503.357.7181
F: 503.357.7185
[email protected]
woodfold.com
WPL18-Z2
OCTAGON WINDOWS
WHITE VINYL CLAD
WOOD OCTAGON WINDOWS
FEATURES:
• Exterior of the sash and jamb are each covered by a rugged one piece white vinyl Centrex® cladding
• Interior Solid, clear, pine construction ready for paint or stain
• Octagon inside & outside
• Full 4-9/16” factory applied jambs
• Treated w/ preservative in accordance w/ ANSI/NWWDA specifications
• Double pane Low “E” insulating glass
•One-piece molded nail flashing provides an effective weather barrier and easy mounting
-- Specific features of operating units --
• Venting design w/ premium telescoping pushbar operator
• Two position hold open hardware
• Securely locking retainer
•Sash can be opened without removing the screen
• Hardware quick-disconnect feature provides maximum sash opening
• Factory applied dual weatherstripping
• stainless steel continuous hinge and stainless screws
• Removable aluminum framed screen installed
• ”Almond” colored pushbar ( screen and pushbar color-matched )
Vinyl Operating (In Sash) Vinyl Stationary (Direct Glazed)
w/ optional 9lt wood grille
2-0 EXTERIOR OCTAGON WINDOWS
Description Rough Opening PRICE CODE:
WHITE VINYL CLAD 590.00 CWWCFO20LE
890.00 CWWCVO20LE
STATIONARY 24-1/2” 66.00 CWCO9LGFIX
72.00
OPERATING 24-5/8” CWCO9LG
9 LIGHT WOOD GRILLE FOR STATIONARY UNIT *
9 LIGHT WOOD GRILLE FOR OPERATING UNIT *
*GRILLES ARE UNFINISHED
August 14, 2018 Prices Subject to Change without Notice J-1
VINYL SLIDING PATIO DOORS
Builder Series White Vinyl Sliders Stocked with
Screen Installed with Key Lock as an Option
Code 1-Lite Clear Low E Glass 1162.00
SPD601LBL 1162.00
SPD601LBR 6/0 x 6/8 1-Lite Left Hand
6/0 x 6/8 1-Lite Right Hand
SPD6015LBR 15-Lite GBG 5/8” Flat Bar Low E Glass 1310.00
SPD6015RBR 6/0 x 6/8 15-Lite GBG Left Hand 1310.00
6/0 x 6/8 15-Lite GBG Right Hand
SPD6015CLB 1310.00
SPD6015CRB 15-Lite GBG 5/8” Contour Bar Low E Glass 1310.00
6/0 x 6/8 15-Lite GBG Left Hand
6/0 x 6/8 15-Lite GBG Right Hand
SPD60BLBL 1-Lite Clear Glass with Internal Blinds 2350.00
SPD60BLBR 6/0 x 6/8 1-Lite with Blinds LH 2350.00
6/0 x 6/8 1-Lite with Blinds RH
SPDKLHH Optional Key Lock 30.00
SPDKRHH White Keyed LH Exterior Handle 30.00
White Keyed RH Exterior Handle
SPD60PSCR Screen 170.00
3068 Fiberglass Screen
Standard Features: Handing Chart - As viewed from the Outside
Color : White
Size: 6/0 x 6/8
Frame: Integral Nail Fin
Stainless Steel track at head and sill.
Glazing: Tempered, Insulating Low E
Hardware: Contour Handle, Adjustable Steel Rollers
Hardware Color: Color matched to extrusion
Grilles: 5/8” Flat GBG
Weatherstrip: Full Perimeter
Screen Frame Color: Color matched to extrusion
Jamb Depth: 4-9/16” Overall Jamb Depth
Performance: DP20
Left Hand Right Hand
August 30, 2018 Prices Subject to Change without Notice J-2
VINYL SLIDING PATIO DOORS
Optional Features and Technical Information
Optional Features (Available by Special Order):
Colors : Desert Sand
Size: Width - 5/0 to 8/0
Height - 6/8 to 8/0
Frame: Pocket Frame
Block Frame
Glazing: - Clear - Bronze
(All Tempered) - Argon - Gray
- Low-E 366 - Laminated
Hardware: Key Cylinder (In stock at BWI)
Grilles: - 1” Contour GBG
- 7/8” Flat GBG
- 7/8” SDL
Hardware Color: Color matched to extrusion
Screen frame Color: Color matched to extrusion
Jamb Depth: 6-9/16” Overall Jamb Depth
Sliding Door with Pet Panel
Low-E Energy Saving Glass
Secure-closing pet panel both automatic
WEN-Lock® and clear flap
Maintains full access as a standard 5/0 x
6/8 Patio Door
Thermal Performance Ratings Acoustic Performance Ratings
Glazing U-Factor SHGC Max. Size Configuration Glazing IG O/A STC Rating OITC Rating
(no grids) Tested (mm) (in)
(in.) 23
Clear 0.47 0.65 XO 3.2 - 3.2 3/4 28 26
Low-E 0.33 0.35 71.5 x 80.0 32 26
LoĒ³-366 0.33 0.23 XO 4.8 - 3.2 1 32 27
71.5 x 80.0 31
XO 3.2 - 5.6L 1
71.5 x 80.0
XO 4.8 - 5.6L 1
71.5 x 80.0
May 1, 2017 Prices Subject to Change without Notice J-3
KD Pocket Door Frame
An easily assembled, structurally strong
pocket door frame. Designed for the
builder or do-it-yourselfer. Providing a
space saving opportunity while still
assuring privacy. Pocket doors do not
need “swing” room to use up valuable
floor space.
Hangers provide smooth rolling action
and are GUARANTEED jump proof.
Unique design of floor brackets allow
for settling of floor without distorting
header track.
Available for all standard door sizes, Single
or an all-purpose size to minimize inventory. Packed KD
NOTE: The #1000KD Series Frame is available for custom doors
up to 4’0” wide, 9’0” high; and up to 200 pounds in weight.
EXCEPTIONAL FEATURES
STRONG STIFFENERS K.D. POCKET DOOR HARDWARE
Split jamb and stud uprights have full
steel sides and backs to provide Pocket Door Frames and Hardware. Made with 3 wheel ball bearing rollers
maximum rigidity for wall material
and restrict nails from penetration JPDF #1000KD Pocket Door Frame 3/0 x 6/8 114.00
into pocket. Slots allow room for
easy nailing of trim stops. JPDF70 #1000KD Pocket Door Frame 3/0 x 7/0 172.00
JPDF80 #1000KD Pocket Door Frame 3/0 x 8/0 177.00
JPDF40 #1000KD Pocket Door Frame 4/0 x 6/8 244.00
REMOVABLE TRACK PDBBROLLER #1000KD Replacement Door Hardware - (250lbs) 24.00
Track has keyhole slots for easy removal AFCK Converging Kit (for double door openings) 22.00
without tearing out walls. Box design JA #1575 Adapter for 1-3/4" Doors 9.00
prevents rollers from jumping track. JEP #150 Edge Pulls Brass US3 Finish only 8.00
Convex rails provide one-point wheel JSC #1521 Suncrest Privacy Lock US3 33.00
contact for smoothness - dirt traps for JSCP #1501 Suncrest Passage Lock US3 33.00
free rolling. JPDHO 15.00
JHR #1500 Pocket Door Replacement Hardware (bag) 24.00
HANGERS Hanger Roller (200lbs)
Design insures all wheels carry weight
equally. Smooth rolling, balanced wheels ROUGH OPENINGS #1000KD Series Pockets - KD Pocket Door
ride with minimum friction on convex
track rails. A “flip-of-a-clip” separates Frames
hangers from doors for easy removal. 2/0 x 6/8 49”x84-1/2” Made with 3 wheel ball bearing rollers
SELF-ADJUSTING FLOOR ANCHORS 2/4 x 6/8 57”x84-1/2” For Thickness: 1-1/8” to 1-3/8” Doors
Long vertical fingers slide into split studs - 2/6 x 6/8 61”x84-1/2” Door width: Standard 1/0 - 3/0
allow for settling of floor without disturb- 2/8 x 6/8 65”x84-1/2” Door Heights: Standard 6/8
ing 3/0 x 6/8 73”x84-1/2” Door weight: Standard 250lbs.
horizontal alignment of header and track.
Plates can be nailed or cemented to floor. 4/0 x 6/8 97” x 84-1/2” Wall Size: Standard 2x4 construc-
NOTE: 1-3/4” doors require Special 3/0 x 7/0 73” x 88-1/2” tion
Adaptor Kit. 3/0 x 8/0 73” x 100-1/2” Hardware:
See OPTIONAL listing. Wall Cover: 3 wheel ball bearing
Standard 1/2” drywall
Jamb Kit: NOT INCLUDED
Pocket latches NOT INCLUDED
May 1, 2017 Prices Subject to Change without Notice L-1
SET-UP POCKET DOOR FRAMES
A & F Built-Up Pocket Door Frames
A & F Pocket Door systems are designed to offer maximum space where traditional
swing doors would use to much space. Pocket door frames are well suited for dining
#1000BU Series Pockets - Built-Up
Pocket Door Frames
Made with 3 wheel ball bearing rollers
For Thickness: 1-1/8” to 1-3/8” Doors
Door width: Standard 2/0 - 3/0
Door Heights: Standard 6/8
Door weight: Standard 250lbs.
Wall Size: Standard 2x4 construction
Hardware: 3 wheel ball bearing
Wall Cover: Standard 1/2” drywall
Jamb Kit: NOT INCLUDED
Pocket latches NOT INCLUDED
SIZE: CODE: LIST: ROUGH OPENINGS
2/0 X 6/8 PDFSU20 118.00
2/4 X 6/8 PDFSU24 122.00 2/0 x 6/8 49” x 84-1/2”
2/6 X 6/8 PDFSU26 122.00 2/4 x 6/8 57” x 84-1/2”
2/8 X 6/8 PDFSU28 124.00 2/6 x 6/8 61” x 84-1/2”
3/0 X 6/8 PDFSU30 127.00 2/8 x 6/8 65” x 84-1/2”
3/0 x 6/8 73” x 84-1/2”
FJ JAMB KIT PDFJKFJ 122.00 4/0 x 6/8 97” x 84-1/2”
CLEAR JAMB KIT PDFJKCL 138.00 3/0 x 7/0 73” x 88-1/2”
3/0 x 8/0 73” x 100-1/2”
May 1, 2017 Prices Subject to Change without Notice L-2
BWI BARN DOOR HARDWARE
CODE TRACK SIZE STRAP TYPE FINISH LIST PRICE
BDT78BSMB 78-3/4" BENT STRAP BLACK 330.00
BDT78BSSS 78-3/4" BENT STRAP SATIN NICKEL 440.00
BDT78SSMB 78-3/4" STRAIGHT STRAP 320.00
BDT78SSSS 78-3/4" STRAIGHT STRAP BLACK 430.00
BDT78TSSS 78-3/4" TOP OF DOOR STRAP SATIN NICKEL 420.00
SATIN NICKEL
"BENT STRAP" "TOP OF DOOR STRAP" "STRAIGHT STRAP"
‘Bent Strap’ features a modern face mount ‘Top of Door Strap’ features a top mounted 'Straight Strap’ barn door system features a
bent strap to hang wood doors on a strap to hang wood doors on a traditional classic face mount flat strap to hang wood
traditional rail track. A slight variation of the rail track. Ideal for door applications where doors on a traditional rail track. Large
‘Straight Strap,’ the bending of this strap you want a clean appearance, these wheels wheels provide excellent strength and
appears to enclose the wheel and offers the provide extremely smooth door operation durability as well as smoothness of travel
same qual-ity of travel along the track. along the track. along the track.
Specifications:
Barn Door Hardware Kits include: track, straps, and all Series 200WM
mounting hardware.
Warranty: Lifetime replacement for manufacturing defects
Hardware capacity: Doors up to 300lbs
78" Kits include 5 wall spacers and bolts. Set includes track and hardware for a single door
Finished opening width recommended to be 1-1/4" less in width then
Black finished bolts are used for both bronze and the door panel size
Finished opening height is recommended 5/8" plus door slab height
matte black applicatoins.
August 1, 2018 Prices Subject to Change without Notice L-3
BWI BYPASS SLIDING DOOR HARDWARE
STANDARD HARDWARE HEAVY DUTY HARDWARE
Nylon Roller Hangers and Steel Non-Facia Rail for doors 3/4” DESCRIPTION LIST PRICE
to 1-3/8” thick and weighing up to 50 lbs.
Recessed Track CODE JSH134_ _
JSH138_ _
CODE RST_ _
DESCRIPTION WIDTH LIST PRICE 4’0” Packaged Sets 80.00 each
#2222 Recessed Track 4/0 (47”) 40.00 5’0” Packaged Sets 88.00 each
#2222 Recessed Track 5/0 (59”) 49.00 6’0” Packaged Sets 98.00 each
#2222 Recessed Track 6/0 (71”) 58.00 8’0” Packaged Sets 152.00 each
CODE RSTHDWBAG TRACK ONLY FOR SLIDING UNITS
2 Door Hardware Bag - Includes: 12.00 set
2 Pulls, 4 Rollers, 1 Floor Guide
CODE J134192
J138192
Surface Mount Track
#1138 Surface Mount Track Only 4/0 (47") 13.00 16'0" Track Only 1-3/4" 194.00
#1138 Surface Mount Track Only 5/0 (59") 18.00 16'0" Track Only 1-3/8" 174.00
#1138 Surface Mount Track Only 6/0 (71") 20.00 134F/138F Commercial grade hardware for 1-3/8” &
1-3/4” Doors weighing up to 200 lbs. (When ordering,
#1138 Surface Mount Track Only 8/0 (95") 30.00
you must specify 1-3/8” or 1-3/4”)
STANDARD 30 Lbs. BULK BIFOLD DOOR
HARDWARE
SERIES 2400:
For two and four-panel installations, 7/8” to 1-3/8”
thick panels weighing up to 30 lbs. each.
This Stanley ACME hardware is designed for
residential passageway or closet bifold doors. The tap
hardware allows for quick installation.
BULK STOCK ONLY BIFOLD TRACK - 1825 SERIES
DESCRIPTION LIST PRICE CODE LIST PRICE
CODE BH2900_DR BTSCH40 10.00
BTSCH50
#2434-1 Two Door Hardware Pkg* 9.00 bag BTSCH60 12.00
#2454-1 Four Door Hardware Pkg* 11.00 bag 16.00
CODE BT_ _
#2007-30” White Track 6.00 each
#2007-36” White Track 6.00 each
#2007-48” White Track 12.00 each
#2007-60” White Track 12.00 each
#2007-72” White Track 12.00 each
#2007-84” White Track 15.00 each
#2007-96” White Track 15.00 each
*Hardware3 Package Includes:
1- 2404 Top Roller Guide
1- 2402 Top Pivot
1- 2799 Jamb Bracket
1- 2803 Bottom Pivot
1- 2007 Steel Track w/ Pivot Bracket
August 30, 2018 Prices Subject to Change without Notice L-4
BWI BIFOLD HARDWARE
HEAVY DUTY #100 FD BIFOLD
HARDWARE
DESCRIPTION LIST PRICE
Code LOOSE DOOR HINGES LIST PRICE CODE JBH_ _
ABH312 2.00 Each 3’0” 2 Door Packaged Sets 67.00
AN312 Description 2.00 Each 4’0” 4 Door Packaged Sets 114.00
BH312 3-1/2" ANTIQUE BRASS HINGE 5/8 RADIUS 2.00 Each 5’0” 4 Doot Packaged Sets 119.00
BH312BB 3-1/2" ANTIQUE NICKEL HINGE 5/8 RAD US15A 2.00 Each 6’0” 4 Door Packaged Sets 124.00
BH312P 3-1/2" BWI STANDARD BRASS HINGE 5/8" RADIUS 2.00 Each 8’0” 4 Door Packaged Sets 134.00
BL312 3-1/2" BRIGHT BRASS HINGE 5/8 RADIUS US3 2.00 Each
CH312 3 1/2"PRIMED (WHITE) HINGE 5/8" RADIUS 2.00 Each #100 Aluminum Track Only (No Hardware, Screws)
CH312SQ 3-1/2" PAINTED BLACK HINGE 5/8 RADIUS 2.00 Each
ORAB312 3-1/2" DULL CHROME US26D HINGE 5/8" RADIUS 2.00 Each CODE J100 _ _
3-1/2"DULLCHROME(26D)SQUARE CORNER HINGE 48” Track 21.00
3-1/2" OIL RUBBED ANTIQUE BRONZE US10B 60” Track 25.00
72” Track 30.00
96” Track 41.00
192" Track 90.00
For more information on these
products, please refer to the Manufacturer’s
spec sheets included in this section.
BOMMER SPRING PIVOTS BOMMER DOUBLE ACTING
HORIZONTAL TYPE SPRING HINGES
TYPE 7811 with FLOOR PLATE 3029 SERIES:
Codes & List Price:
It is advisable to use three hinges on a door. The
FMPH $125.00 center should be installed as close as possible to the top hinge for
Optional Plate Finished maximum support. Hinge capacity decreases as door height increases.
FMPHDCPLATE $42.00
FMPHOBPLATE $42.00
SPECIFICATIONS: TYPE 3029 (3” THRU 8”) MORTISE:
Steel mechanism
Type 7811 with steel trim Door flange is mortised into door. Jamb flange is surface applied to jamb.
Ball Bearing Permits doors to open in either direction and automatically return to closed
Double Action position. Adjustable spring tension permits power and speed adjustment of
Hold open at approximately each size spring hinge. No hanging strip is required on frame. Steel
85° - 90° material. Non-template. Non-handed. All wood screws, packed two per box.
Adjustable Spring tension
Non-handed BWI STOCK IN #633 DULL BRASS FINISH
Packed one set per box, with
wood screws MAXIMUM DOOR SIZES AND WEIGHTS
2 Hinges 3 Hinges Maximum Max
Door Door
Item Door Height List Price
Number Door Weight Thickness
Door (Lbs.) Door
Weight Width Width 1-1/8” to
1-1/2”
(Lbs.)
1-3/4"
Item Door Thickness Maximum Maximum Door CODE DAH138
Number Door Width Height
1-3/8” x 1-3/4” 3029-5 65 2’8” 93 3’0” 6’8” 94.00 Each
7811 3’-0” 8/0 7’0” 100.00 Each
CODE DAH134
3029-6 75 2’8” 107 3’0”
August 14, 2018 Prices Subject to Change without Notice L-5
RESIDENTIAL AND HEAVY DUTY HINGES
LOOSE
RESIDENTIAL DUTY PLAIN BEARING
DESCRIPTION EMTEK SOLID BRASS PLATED STEEL
3-1/5” SQUARE CORNER STOCK CODE LIST PRICE STOCK CODE LIST PRICE
3.5X3.5 SQ. CORNER US7 FRENCH ANTIQUE E961137 18.00 N/S N/S
3.5X3.5 SQ. CORNER US10B OIL RUBBED BRONZE E9611310B 18.00 ORB312SQ 4.00
3.5X3.5 SQ. CORNER US15 SATIN NICKEL E9611315 18.00 SN312SQ 4.00
3.5X3.5 SQ. CORNER US15A PEWTER/ANTIQUE NICKEL E9611315A 18.00 AN312SQ 4.00
3.5X3.5 SQ. CORNER US26 POLISHED CHROME E9611326 18.00 N/S N/S
3.5X3.5 SQ. CORNER PVD LIFETIME BRASS E96113PVD 18.00 N/S N/S
4” SQUARE CORNER STOCK CODE LIST PRICE STOCK CODE LIST PRICE
4X4 SQ. CORNER US7 FRENCH ANTIQUE E961147 20.00 N/S N/S
4X4 SQ. CORNER US10B OIL RUBBED BRONZE E9611410B 20.00 ORBH4SQ 5.00
4X4 SQ. CORNER US15 SATIN NICKEL E9611415 20.00 SNH4SQ 5.00
4X4 SQ. CORNER US15A PEWTER/ANTIQUE NICKEL E9611415A 20.00 ANH4SQ 5.00
4X4 SQ. CORNER US26 POLISHED CHROME E9611426 20.00 N/S N/S
4X4 SQ. CORNER PVD LIFETIME BRASS E96114PVD 20.00 BH4SQ 5.00
3-1/2” RADIUS CORNER STOCK CODE LIST PRICE STOCK CODE LIST PRICE
3.5X3.5 5/8 RADIUS US7 FRENCH ANTIQUE E961337 18.00 N/S N/S
3.5X3.5 5/8 RADIUS US10B OIL RUBBED BRONZE E9613310B 18.00 N/S N/S
3.5X3.5 5/8 RADIUS US15 SATIN NICKEL E9613315 18.00 N/S N/S
3.5X3.5 5/8 RADIUS US15A PEWTER/ANTIQUE NICKEL E9613315A 18.00 N/S N/S
3.5X3.5 5/8 RADIUS US26 POLISHED CHROME E9613326 18.00 N/S N/S
3.5X3.5 5/8 RADIUS PVD LIFETIME BRASS E96133PVD 18.00 N/S N/S
4” RADIUS CORNER
E9613410B 24.00 N/S N/S
4X4 5/8 RADIUS US10B OIL RUBBED BRONZE E9613415 24.00 N/S N/S
4X4 5/8 RADIUS US15 SATIN NICKEL E96134PVD 24.00 N/S N/S
4X4 5/8 RADIUS PVD LIFETIME BRASS
HEAVY DUTY BALL BEARING
DESCRIPTION EMTEK SOLID BRASS PLATED STEEL
3-1/2” SQUARE CORNER
3.5X3.5 SQ. CORNER US7 FRENCH ANTIQUE STOCK CODE LIST PRICE STOCK CODE LIST PRICE
3.5X3.5 SQ. CORNER US10B OIL RUBBED BRONZE
3.5X3.5 SQ. CORNER US15 SATIN NICKEL E964137 25.00 N/S N/S
3.5X3.5 SQ. CORNER US15A PEWTER/ANTIQUE NICKEL E9641310B 25.00 N/S N/S
3.5X3.5 SQ. CORNER US26 POLISHED CHROME E9641315 25.00 N/S N/S
3.5X3.5 SQ. CORNER PVD LIFETIME BRASS E9641315A 25.00 N/S N/S
E9641326 25.00 N/S N/S
4” SQUARE CORNER E96413PVD 25.00
4X4 SQ. CORNER US7 FRENCH ANTIQUE LIST PRICE N/S N/S
4X4 SQ. CORNER US10B OIL RUBBED BRONZE STOCK CODE 30.00
4X4 SQ. CORNER US15 SATIN NICKEL E964147 30.00 STOCK CODE LIST PRICE
4X4 SQ. CORNER US15A PEWTER/ANTIQUE NICKEL E9641410B 30.00 N/S N/S
4X4 SQ. CORNER US26 POLISHED CHROME E9641415 30.00 8.00
4X4 SQ. CORNER PVD LIFETIME BRASS E9641415A 30.00 ORBH4SQBB 8.00
E9641426 30.00 SNH4SQBB 8.00
E96414PVD ANH4SQBB N/S
N/S
BH4SQBB 8.00
May 1, 2017 Prices Subject to Change without Notice L-6
AMERICAN STAIRWAYS
Bessler Space Saver
Specifications Specifications Specifications
Tread size 1 x 4 Tread size 1 x 6 Tread size 1 x 6
Stringer 1 x 4 Stringer 1 x 5 Stringer 1 x 5
Frame 1 x 4 Frame 1 x 5 Frame 1 x 5
Model 312=Aluminum Everest * CODES: MODEL SIZE: PRICE: WEIGHT:
Model INS= Insulated ** 250LB
D225489444 444 22X54X8/9 238.00 250LB
D225410444 444 22X54X10’ 260.00 250LB
D255489444 444 25.5X54X8/9 238.00 250LB
D255410444 444 25.5X54X10’ 260.00 350LB
D225489655 655 22X54X8/9 338.00 350LB
D225410655 655 22X54X10’ 366.00 350LB
D255489655 655 25.5X54X8/9 358.00 350LB
D255410655 655 25X54X10’ 384.00 350LB
D256312FR 312 25.5X66X12’ 846.00 350LB
D225489INS INS 22X54X8/9 406.00 350LB
D225410INS INS 22X54X10’ 436.00 350LB
D255489INS INS 25.5X54X8/9 426.00 350LB
D255410INS INS 25.5X54X10’ 454.00
L-7
Rough Opening Cealing # of A** B IBS per
WxL Height treads Landing Projection Unit
Space
22" x 48" 8/6 10 60" 54
22" x 54" 8/9 11 56" 66" 58
22" x 54" 10' 13 58" 79" 63
25-1/2" x 48" 8/6 10 65" 60" 55
25-1/2" x 54" 8/9 11 56" 66" 62
25-1/2" x 54" 10' 13 58" 79" 66
65"
August 14, 2018 Prices Subject to Change without Notice
THE SUCCESS OF OUR COMPANY STANDS ON THE
QUALITY OF EVERY STAIRWAY WE MAKE.
* Every HUSKY Features:
• Full Width Heavy Duty Piano Hinge
• 3/16” Steel Ladder Rod Under Each Tread
• Selected Kiln Dried Southern Pine Lumber
• Reinforced Door Panel
• Moulded Stringer, Handrail, and Treads
• Finished Millwork Appearance
• Safety Locknut to Secure Spring Arm to Ladder Section
• Adjustable Spring Tension
• Nuts, Bolts, and Hardware Plated or Painted to Prevent Rust
• Completely Assembled, Ready to Install with Instruction Supplied
* Easy First Step Down From Attic for Personal Safety
* 9-1/2”Tread Rise on All Husky Stairs
1. Our piano hinge reaches across the entire width of the stairway. This means for more strength and
rigidity than other type stairway hinges now in use. Cuts out air leakage at head of stair, and does
not interfere with trim carpenter.
2. Every tread has a 3/16” ladder rod with washer to keep HUSKY stairs rigid and prevent bending
or separation under heavier loads.
3. Heavier gauger hardware arms and reinforced bottom section hinge at stress point.
4. All wood parts of kiln dried southern yellow pine, selected for density and load bearing capability.
5. Moulded stringers, treads and handrails. Eliminates splinters, eases edges, and enhances finishes
millwork appearances.
JOB TESTED IN THOUSANDS OF INSTILLATIONS THROUGHOUT THE NATION AND
SEVERAL FOREIGN COUNTRIES.
* THERE’S A HUSKY THAT’S RIGHT FOR YOU.*
OPTIONS AND ACCESSORIES
HY-VIZ Rubberized coated treads - additional; safety at low cost.
INSULATED DOOR PANEL (R-6 insulating value saves energy.)
FIRE RESISTANT DOOR PANEL (Class C - Flame spread not over 25 in a 30 minute test. UL Rate.)
THREE GREAT MODELS TO CHOOSE FROM
MODEL: 444 1x4 Treads, 1x4 Stringer, 1x4 Frame Rated 250 LBS
MODEL: 544 1x5 Treads, 1x4 Stringer, 1x4 Frame Rated 250 LBS
MODEL: 655 1x6 Treads, 1x5 Stringer, 1x5 Frame Rated 300 LBS
A B Available in Models
Landing Projection
Rough Opening Ceiling Height # of Treads* Space** 444WT 544WT
60”
56” 66” 655WT
58” 79”
22”x48” 8’5” 10 65” 60” x54 lbs. x56 lbs. x64 lbs.
22”x54” 8’9” 11 56” 66”
22”x54” 10’ 13 79” x58 lbs. x60 lbs. x67 lbs.
25-1/2”x48” 8’5” 10 58” 66”
25-1/2”x54 8’9” 11 79” x63 lbs. x65 lbs. x70 lbs.
25-1/2x54” 10’ 13 65” 66”
30”x54 8’9” 11 59” 79” x55 lbs. x60 lbs. x68 lbs.
30”x54 10’ 13 66”
30”x60 8’9” 11 59” x62 lbs. x65 lbs. x75 lbs.
30”x60 10’ 13 66”
x66 lbs. x68 lbs. x84 lbs.
x84 lbs.
x92 lbs.
x94 lbs.
x96 lbs
* Most competitors has 1 or 2 treads less. L-8
May 1, 2017
DOOR SILLS AND SILL PANS
DOOR SILLS
ARTICULATING COMPOSITE CAP INSWING SILL 2" HORNS
Size Mill Finish Bronze Finish
4-9/16" Wall 6-9/16" Wall 4-9/16" Wall 6-9/16" Wall
Codes Codes Codes Codes
2/6 AS26A4916C 53.00 AS26A6916C 63.00
2/8 AS28A4916C 53.00 AS28A6916C 63.00 AS28AB491C 63.00 AS28AB691C 70.00
3/0 AS30A4916C 56.00 AS30A6916C 68.00 AS30AB491C 66.00 AS30AB691C 77.00
3/6 AS36A4916C 105.00 AS36A6916C 111.00 AS36AB491C 122.00 AS36AB691C 136.00
5/0 AS50A4916C 105.00 AS50AB491C 122.00
5/4 AS54A4916C 105.00 AS54AB491C 122.00
6/0 AS60A6916C 115.00 AS60AB491C 122.00 AS60AB691C 172.00
ADJUSTABLE COMPOSITE CAP INSWING SILL-2"HORNS
Size Mill Finish Bronze Finish
4-9/16" Wall 6-9/16" Wall 4-9/16" Wall 6-9/16" Wall
Codes Codes 44.00 Codes 44.00 Codes 55.00
34.00 AS26I6916C 44.00 44.00 55.00
2/6 AS26I4916C 34.00 AS28I6916C 47.00 AS28I49CBZ AS28I69CBZ
2/8 AS28I4916C 35.00 AS30I6916Z AS30I49CBZ AS30I69CBZ
3/0 AS30I4916C
3/6 AS36I4916C 84.00
5/0 AS50I4916C
5/4 AS54I4916C 84.00
6/0 AS60I4916C
84.00
84.00
FIXED SILL-4-9/16" W/2"HORNS ADA SILL MILL FINISH
Size Mill Finish 4-9/16" Wall 6-9/16" Wall
Codes Codes Codes
2/6 FS26 24.00
2/8 FS28 25.00 3/0 HCS30 28.00 HCS30658 38.00
3/0 FS30 26.00
6/0 HCS60 58.00 HCS60658 80.00
Endura Door Sweep
Articulating Adjustable Fixed (Sweep is
Codes Codes Codes Adjustable)
3/0 DBKAC-- 7.50 ADJ-- 4.00 F5DBP-- 6.00
SILL PANS
SINGLE UNITS FOR USE WITH COMPOSITE SILL
Sill Pan & Cap for Composite Sill
Size Codes Description Cost
42" PAN404 4-9/16" Wall $35.00
42" PAN406 6-9/16" Wall $50.00
February, 15, 2019 Prices Subject to Change without Notice L-9
BWI
Exterior Door Unit - Limited Warranty
BWI offers the following Limited Warranty on exterior door units produced by BWI after September 1st 2003:
Terms and Conditions of the BWI Limited Warranty:
BWI warrants, subject to the terms and conditions below, that all components of its exterior door units including
slab, sills, frames and brick mould casing to be free from manufacturing defects in material and workmanship under
normal conditions and use for the following periods from the date of delivery by BWI to BWI’s customer or the
date of installation, provided that the installation occurs within 30 days of such delivery.
High Definition Steel Door Wood Edge Units - 5 years
High Definition Steel Door Steel Edge Units - 15 years
Oak Craft Fiberglass Door Units – 25 years
Barrington Fiberglass Door Units – Limited Lifetime
Bellville Fiberglass Door Units –Limited Lifetime
Fir Door Units – 1 year
Pine, Oak, and Mahogany- 1 year
Insulated Glass – 10 years provided by the manufacturer only, if any.
BWI PROVIDES NO WARRANTY OF ANY KIND FOR INSULATED GLASS.
All door and frame components must be finished and maintained in the strictest conformity with the installation
and finishing instructions provided with the product.
All door units must be fully installed and finished immediately upon installation.
EXCLUSIONS [Read Carefully]
This limited warranty does not cover:
• Warp in plane of door less than ¼ “
• Natural wood characteristics such as, but not limited to, mineral streaks, small knots, grain, texture, color,
and tone variations
• Natural expansion and contraction during seasonal and temperature changes, air conditioning or heating
influences
• Differences between samples or photographs and the actual door unit
• Indentations, scratches or similar surface damage caused by negligence, lack of protection, improper main-tenance,
normal use, abrasives, insuf cient protection, pets or other conditions beyond our reasonable control.
• Improper delivery by anyone other than BWI, improper storage, improper installation, improper or unau-
thorized repair, improper maintenance, improper protection, improper care, abuse, water, moisture, insects, animals,
and any other condition beyond our reasonable control
• Excessive or inadequate humidity in the area or excessive change in ambient temperature.
• Accidents, man-made or natural, including but not limited to leaking or broken plumbing, frie, fol od, earth-
quake or other casualty before, during or after installation
• Settling of the building
• Any other condition, circumstance, event or conduct beyond our control
• Anyone other than the original retail consumer purchaser of the product
• Purchasers for resale of door units
• Any defect that was observable before installation
• Any improper job site condition or any inappropriate or improperly prepared framing, sill, supporting or
adjacent area of the door unit
• Installation of door units outside the continental United States
• Damage caused by the absence of a safe, secure or dry place for the storage or the installation of the door
unit (provide at least a four-inch air space under and around the door unit during storage)
• Damage caused by anyone other than BWI repairing or altering the door unit
• Damage caused by failure to comply strictly with installation and fni ishing instructions
• Damage caused by failure to perform yearly inspections and maintenance
May 1, 2017 W-1
Manufactures warranty subject to change without notice
BWI WILL AUTHORIZE NO RETURN OR REPAIR, OR GIVE ANY CREDIT OR REFUND ANY MONEY, AND
BWI MAKES ABSOLUTELY NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WHETHER OF
MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR OTHERWISE, EXCEPT AS STATED
IN THIS LIMITED WARRANTY.
BWI WARRANTS ONLY FOR THE PERIODS STATED ABOVE.
BWI’S ONLY OBLIGATION DURING THIS WARRANTY PERIOD IS AT BWI’S OPTION EITHER TO
REPLACE OR REPAIR THE DEFECTIVE DOOR UNIT OR DEFECTIVE COMPONENT.
BWI HAS NO OTHER OBLIGATIONS OF ANY KIND TO ANYONE. BWI WILL NOT COMPENSATE ANYONE
FOR ANY CLAIMS, LOSSES OR DAMAGES OF ANY KIND DURING THE APPLICABLE LIMITED
WARRANTY PERIOD EXCEPT AS STATED EXPRESSLY IN THE LIMITED WARRANTY, ALL OF BWI’S
OBLIGATIONS END WHEN THE APPLICABLE LIMITED WARRANTY PERIOD IS OVER.
UNDER NO CIRCUMSTANCES SHALL BWI BE LIABLE FOR ANY COST OF LABOR, INSTALLATION OR
FINISHING OF THE REPLACEMENT OR ORIGINAL PRODUCT.
IN NO EVENT SHALL BWI BE HELD RESPONSIBLE FOR SPECIAL, INDIRECT, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, OR FOR ANY THEORY OF LAW OTHER THAN THE SPECIFIC TERMS OF THIS
LIMITED WARRANTY.
This limited warranty is valid ONLY in the continental United States. This limited warranty is not transferable and
ONLY the original retail consumer is entitled to this limited warranty. No person has the authority to change this lim-
ited warranty or to create any obligation or liability in connection with our products.
Some states do not allow the exclusion or limitation of incidental, special or consequential damages, or the exclusion
or limitation of implied warranties, so such exclusions or limitations may not apply to you. This warranty gives you
specific legal rights and you may have other rights that vary from state to state.
BWI MAKES ABSOLUTELY NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WHETHER OF MER-
CHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR OTHERWISE, EXCEPT AS STATED IN
THIS LIMITED WARRANTY.
Claims Procedure:
If a covered defect exists, written notice of claim must be received by BWI or the dealer who sold you the BWI door
within the Warranty period. A BWI representative must then inspect the door and BWI will then provide you with a
written determination.
All questions of evident product quality are to be addressed prior to installation. Installation implies acceptance. There
is no warranty for appearance-related claims or other evident defects once the product is installed.
Proof of Purchase. A valid proof of purchase in the form of a sales receipt or other documents which establish proof of
purchase must be delivered to us together with a complete description of the problem and/or a photograph that clearly
shows the warranty problem.
May 1, 2017 . W-2
Manufactures warranty subject to change without notice
BWI
Interior Door Unit - Limited Warranty
BWI offers the following Limited Warranty on interior door units produced by BWI after March 1, 2011:
Terms and Conditions of the BWI Limited Warranty:
BWI warrants, subject to the terms and conditions below, that all door slabs in interior door units to be free from manufacturing
defects in material and workmanship under normal conditions and use for the following periods from the date of delivery by BWI to
BWI’s customer or the date of installation, provided that the installation occurs within 30 days of such delivery.
Masonite Hollow Core- 1 Year
Masonite Solid Core- 5 Year
Masonite Stile & Rail Wood Doors- 1Year
Masonite Crown MDF- 1 Year
Masonite Wood- 1 Year
Masonite Torrefied- 20 Year Warp Only
All door and frame components must be finished and maintained in the strictest conformity with the installation and finishing
instructions provided with the product.
All door units must be fully installed and finished immediately upon installation.
EXCLUSIONS [Read Carefully]
This limited warranty does not cover:
•Warp in plane of door less than ¼ “
•Natural wood characteristics such as, but not limited to, mineral streaks, small knots, grain, texture, color, and tone variations
•Natural expansion and contraction during seasonal and temperature changes, air conditioning or heating influences
•Differences between samples or photographs and the actual door unit
•Indentations, scratches or similar surface damage caused by negligence, lack of protection, improper maintenance, normal use,
abrasives, insufficient protection, pets or other conditions beyond our reasonable control.
•Improper delivery by anyone other than BWI, improper storage, improper installation, improper or unauthorized repair,
improper maintenance, improper protection, improper care, abuse, water, moisture, insects, animals, and any other condition
beyond our reasonable control
•Excessive or inadequate humidity in the area or excessive change in ambient temperature.
•Accidents, man-made or natural, including but not limited to leaking or broken plumbing, fire, flood, earthquake or other
casualty before, during or after installation
•Settling of the building
•Any other condition, circumstance, event or conduct beyond our control
•Anyone other than the original retail consumer purchaser of the product
•Purchasers for resale of door units
•Any defect that was observable before installation
•Any improper job site condition or any inappropriate or improperly prepared framing, sill, supporting or adjacent area of the
door unit
•Installation of door units outside the continental United States
•Damage caused by the absence of a safe, secure or dry place for the storage or the installation of the door unit
(provide at least a four-inch air space under and around the door unit during storage)
•Damage caused by anyone other than BWI repairing or altering the door unit
•Damage caused by failure to comply strictly with installation and finishing instructions
•Damage caused by failure to perform yearly inspections and maintenance
May 1, 2017
Manufactures Warranty Subject To Change Without Notice
BWI WILL AUTHORIZE NO RETURN OR REPAIR, OR GIVE ANY CREDIT OR REFUND ANY MONEY,
AND BWI MAKES ABSOLUTELY NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WHETHER OF
MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR OTHERWISE, EXCEPT AS STATED IN
THIS LIMITED WARRANTY.
BWI WARRANTS ONLY FOR THE PERIODS STATED ABOVE.
BWI’S ONLY OBLIGATION DURING THIS WARRANTY PERIOD IS AT BWI’S OPTION EITHER TO REPLACE OR
REPAIR THE DEFECTIVE DOOR UNIT OR DEFECTIVE COMPONENT.
BWI HAS NO OTHER OBLIGATIONS OF ANY KIND TO ANYONE. BWI WILL NOT COMPENSATE ANYONE FOR
ANY CLAIMS, LOSSES OR DAMAGES OF ANY KIND DURING THE APPLICABLE LIMITED WARRANTY PERIOD
EXCEPT AS STATED EXPRESSLY IN THE LIMITED WARRANTY, ALL OF BWI’S OBLIGATIONS END WHEN
THE APPLICABLE LIMITED WARRANTY PERIOD IS OVER.
UNDER NO CIRCUMSTANCES SHALL BWI BE LIABLE FOR ANY COST OF LABOR, INSTALLATION OR
FINISHING OF THE REPLACEMENT OR ORIGINAL PRODUCT.
IN NO EVENT SHALL BWI BE HELD RESPONSIBLE FOR SPECIAL, INDIRECT, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, OR FOR ANY THEORY OF LAW OTHER THAN THE SPECIFIC TERMS OF THIS
LIMITED WARRANTY.
This limited warranty is valid ONLY in the continental United States. This limited warranty is not transferable and ONLY the origi-
nal retail consumer is entitled to this limited warranty. No person has the authority to change this limited warranty or to create any
obligation or liability in connection with our products.
Some states do not allow the exclusion or limitation of incidental, special or consequential damages, or the exclusion or limitation
of implied warranties, so such exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you
may have other rights that vary from state to state.
BWI MAKES ABSOLUTELY NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WHETHER OF
MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR OTHERWISE, EXCEPT AS STATED IN
THIS LIMITED WARRANTY.
Claims Procedure:
If a covered defect exists, written notice of claim must be received by BWI or the dealer who sold you the BWI door within the
Warranty period. A BWI representative must then inspect the door and BWI will then provide you with a written determination.
All questions of evident product quality are to be addressed prior to installation. Installation implies acceptance. There is no war-
ranty for appearance-related claims or other evident defects once the product is installed.
Proof of Purchase. A valid proof of purchase in the form of a sales receipt or other documents which establish proof of purchase
must be delivered to us together with a complete description of the problem and/or a photograph that clearly shows the warranty
problem.
May 1, 2017
Manufactures Warranty Subject To Change Without Notice
LIMITED 5 YEAR WARRANTY
Safe ‘N Sound® Series Interior Doors
Subject to the limitations and conditions set forth below, Masonite warrants the door will be free of
manufacturing defects in material and workmanship for a period of five (5) years from the date of
its original installation. Masonite grants this warranty only to the original purchaser of the door
and the original purchaser of the building where the door was installed. THIS WARRANTY IS
NOT TRANSFERABLE.
The warranty excludes any defects in the coatings on the door and accessories. Also excluded from
the warranty are defects resulting from (1) exposure to acid, chemicals or fumes; (2) improper use;
(3) improper installation; (4) improper maintenance; (5) water-related damage; or (6) a failure to
follow any applicable installation, care or maintenance instructions.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR
IMPLIED, INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE AND MERCHANTABILITY. MOREOVER, IN NO EVENT WILL MASONITE
BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. This war-
ranty gives you specific legal rights. Other rights vary from state to state and may apply to you.
Some states and federal laws do not allow the exclusion of implied warranties. In the event these
laws apply, then the length of any implied warranty shall be one (1) year or the shortest time in
excess of one year permitted under applicable law. Similarly, some states do not allow the exclu-
sion or limitation of consequential damages and, if applicable, this limitation will not apply.
If a defect occurs, Masonite, at its sole option, will furnish a replacement door, repair the door or
refund the original purchase price. MASONITE’S MAXIMUM LIABILITY IS LIMITED TO
THE AMOUNT OF THE ORIGINAL PURCHASE PRICE. MASONITE WILL NOT PAY
THE COSTS OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENT
DOOR. No representative of Masonite or any other person has any authority whatsoever to
assume for Masonite any other liability or responsibility in connection with the door war-
ranted herein.
If you have a warranty claim, please notify your Masonite Dealer. Include with the notice the fol-
lowing
information:
A. description of door;
B. name and address of owner and installer;
C. proof of sale; and
D. detailed explanation of defect.
Masonite may defer replacing any warped door for a period of up to 12 months from the date of
the original installation in order to allow the door time to equalize to humidity and temperature.
May 1, 2017 W-3
Manufactures warranty subject to change without notice
LIMITED 1 YEAR WARRANTY
Molded Panel, MDF, Flush, Wood Panel, Wood
French, and 1-1/8” Wood Bifold
Series Interior Doors
Subject to the limitations and conditions set forth below, Masonite warrants that the door and
Masonite’s factory-installed glass inserts will be free of manufacturing defects in material and
workmanship for a period of one (1) year from the date of the door’s original installation. Masonite
grants this warranty only to the original purchaser of the door and the original purchaser of the
building where the door was installed. THIS WARRANTY IS NOT TRANSFERABLE.
The warranty excludes any defects in the coatings on the door and accessories. Also excluded from
the warranty are defects resulting from (1) exposure to acid, chemicals or fumes; (2) improper use;
(3) improper installation; (4) improper maintenance; (5) water-related damage; or (6) a failure to
follow any applicable installation, care or maintenance instructions.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR
IMPLIED, INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE AND MERCHANTABILITY. MOREOVER, IN NO EVENT WILL MASONITE
BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. This war-
ranty gives you specific legal rights. Other rights vary from state to state and may apply to you.
Some states and federal laws do not allow the exclusion of implied warranties. In the event these
laws apply, then the length of any implied warranty shall be one (1) year or the shortest time
in excess of one year permitted under applicable law. Similarly, some states do not allow the exclu-
sion or limitation of consequential damages and, if applicable, this limitation will not apply.
If a defect occurs, Masonite, at its sole option, will furnish a replacement door, repair the door or
refund the original purchase price. MASONITE’S MAXIMUM LIABILITY IS LIMITED TO
THE AMOUNT OF THE ORIGINAL PURCHASE PRICE. MASONITE WILL NOT PAY
THE COSTS OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENT
DOOR. No representative of Masonite or any other person has any authority whatsoever to
assume for Masonite any other liability or responsibility in connection with the door warrant-
ed herein.
If you have a warranty claim, please notify your Masonite Dealer. Include with the notice the fol-
lowing
information:
A. description of door;
B. name and address of owner and installer;
C. proof of sale; and
D. detailed explanation of defect.
Masonite may defer replacing any warped door for a period of up to 12 months from the date of the
original installation in order to allow the door time to equalize to humidity and temperature.
May 1, 2017 W-4
Manufactures warranty subject to change without notice
LIMITED LIFETIME WARRANTY
Barrington® Textured Fiberglass Entry Doors
Subject to the limitations and conditions set forth below, Masonite warrants from the date of its origi-
nal installation that (a) the door panel will be free of manufacturing defects in material and workman-
ship for the lifetime of the door; and (b) Masonite’s factory-installed glass inserts and frames will be
free from seal failure or extraordinary discoloration resulting from a manufacturing defect in materi-
als or workmanship for periods of five (5) years for its clear glass inserts and ten (10) years for its
decorative glass inserts. Masonite grants these
warranties only to the original purchaser of the door and the original purchaser of the building where
the door was installed. THIS WARRANTY IS NOT TRANSFERABLE.
The warranty excludes any defects in the coatings on the door and accessories. Also excluded are
defects resulting from (1) exposure to acid, chemicals or fumes; (2) improper use; (3) improper instal-
lation; (4) improper maintenance; (5) water-related damage; or (6) a failure to follow any applicable
installation, care or maintenance instructions. Bubbles, lines, slight surface imperfections and slight
discoloration are characteristics
of fine hand-crafted glass and are not considered defects.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
MERCHANTABILITY. MOREOVER, IN NO EVENT WILL MASONITE BE LIABLE FOR SPE-
CIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal
rights. Other rights vary from state to state and may apply to you. Some states and federal laws do not
allow the exclusion of implied warranties. In the event these laws apply, then the length of any
implied warranty shall be one (1) year or the shortest time in excess of one year permitted under
applicable law. Similarly, some states do not allow the exclusion or limitation of consequential dam-
ages and, if applicable, this limitation will not apply.
If a defect occurs, Masonite, at its sole option, will furnish a replacement door, repair the door or
refund the original purchase price. MASONITE’S MAXIMUM LIABILITY IS LIMITED TO THE
AMOUNT OF THE ORIGINAL PURCHASE PRICE. MASONITE WILL NOT PAY THE COSTS
OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENT DOOR. No representa-
tive of Masonite or any other person has any authority whatsoever to assume for Masonite any other
liability or responsibility in connection with the door warranted herein.
If you have a warranty claim, please notify your Masonite Dealer. Include in the notice the following
information:
A. description of door;
B. name and address of owner and installer;
C. proof of sale; and
D. detailed explanation of defect.
May 1, 2017 W-5
Manufactures warranty subject to change without notice
LIMITED LIFETIME WARRANTY
Belleville® Fiberglass Entry Doors
Subject to the limitations and conditions set forth below, Masonite warrants the door panel to be free
of manufacturing defects in material and workmanship from the date of its original installation.
Masonite grants this warranty only to the original purchaser of the door and the original purchaser of
the building where the door was installed. THIS WARRANTY IS NOT TRANSFERABLE.
The warranty excludes any defects in the coating on the door, any glass inserts or other accessories.
Also excluded are defects resulting from (1) exposure to chemicals, acid or fumes; (2) improper use;
(3) improper installation; (4) improper maintenance; (5) water-related damage; or (6) a failure to fol-
low any applicable installation, care or maintenance instructions.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
MERCHANTABILITY. MOREOVER, IN NO EVENT WILL MASONITE BE LIABLE FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific
legal rights. Other rights vary from state to state and may apply to you. Some states and federal laws
do not allow the exclusion of implied warranties. In the event these laws apply, then the length of any
implied warranty shall be one (1) year or the shortest time
in excess of one year permitted under applicable law. Similarly, some states do not allow the exclu-
sion or limitation of consequential damages and, if applicable, this limitation will not apply.
If a defect occurs, Masonite, at its sole option, will furnish a replacement door, repair the door or
refund the original purchase price. MASONITE’S MAXIMUM LIABILITY IS LIMITED TO THE
AMOUNT OF THE ORIGINAL PURCHASE PRICE. MASONITE WILL NOT PAY THE COSTS
OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENT DOOR. No representa-
tive of Masonite or any other person has any authority whatsoever to assume for Masonite any other
liability or responsibility in connection with the door warranted herein.
If you have a warranty claim, please notify your Masonite Dealer. Include in the notice the following
information:
A. description of door;
B. name and address of owner and installer;
C. proof of sale; and
D. detailed explanation of defect.
May 1, 2017 W-6
Manufactures warranty subject to change without notice
LIMITED 25 YEAR WARRANTY
Oakcraft® Wood-Grain Textured Fiberglass Entry Doors
Subject to the limitations and conditions set forth below, Masonite warrants the door panel to be free
of manufacturing defects in material and workmanship for twenty-five (25) years from the date of its
original installation. Masonite grants this warranty only to the original purchaser of the door and the
original purchaser of the building where the door was installed. THIS WARRANTY IS NOT
TRANSFERABLE.
The warranty excludes any defects in the coating on the door, any glass inserts or other accessories.
Also excluded are defects resulting from (1) exposure to acid, chemicals or fumes; (2) improper use;
(3) improper installation; (4) improper maintenance; (5) water-related damage; or (6) a failure to fol-
low any applicable installation, care or maintenance instructions.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
MERCHANTABILITY. MOREOVER, IN NO EVENT WILL MASONITE BE LIABLE FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific
legal rights. Other rights vary from state to state and may apply to you. Some states and federal laws
do not allow the exclusion of implied warranties. In the event these laws apply, then the length of any
implied warranty shall be one (1) year or the shortest time
in excess of one year permitted under applicable law. Similarly, some states do not allow the exclu-
sion or limitation of consequential damages and, if applicable, this limitation will not apply.
If a defect occurs, Masonite, at its sole option, will furnish a replacement door, repair the door or
refund the original purchase price. MASONITE’S MAXIMUM LIABILITY IS LIMITED TO
THE AMOUNT OF THE ORIGINAL PURCHASE PRICE. MASONITE WILL NOT PAY THE
COSTS OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENT DOOR.
No representative of Masonite or any other person has any authority whatsoever to assume for
Masonite any other liability or responsibility in connection with the door warranted herein.
If you have a warranty claim, please notify your Masonite Dealer. Include in the notice the following
information:
A. description of door;
B. name and address of owner and installer;
C. proof of sale; and
D. detailed explanation of defect.
May 1, 2017 W-7
Manufactures warranty subject to change without notice
LIMITED 15 YEAR WARRANTY
18-, 20-, 22- or 24-Gauge Metal-Edge Steel Entry Doors
Subject to the limitations and conditions set forth below, Masonite warrants the door will be free of
manufacturing defects in material and workmanship for a period of fifteen (15) years from the date of
its original installation. Masonite grants this warranty only to the original purchaser of the door and
the original purchaser of the building where the door was installed. THIS WARRANTY IS NOT
TRANSFERABLE.
The warranty excludes any defects in the coating on the door or any glass inserts or other accessories.
Also excluded from the warranty are defects resulting from (1) exposure to acid, chemicals or fumes;
(2) improper use; (3) improper installation; (4) improper maintenance; (5) water damage; or (6) fail-
ure to follow any applicable installation, care or maintenance instructions.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
MERCHANTABILITY. MOREOVER, IN NO EVENT WILL MASONITE BE LIABLE FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific
legal rights. Other rights vary from state to state and may apply to you. Some states and federal laws
do not allow the exclusion of implied warranties. In the event these laws apply, then the length of any
implied warranty shall be one (1) year or the shortest time in excess of one year permitted under
applicable law. Similarly, some states do not allow the exclusion or limitation of consequential dam-
ages and, if applicable, this limitation will not apply.
If a defect occurs, Masonite, at its sole option, will furnish a replacement door, repair the door or
refund the original purchase price. MASONITE’S MAXIMUM LIABILITY IS LIMITED TO
THE AMOUNT OF THE ORIGINAL PURCHASE PRICE. MASONITE WILL NOT PAY THE
COSTS OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENT DOOR.
No representative of Masonite or any other person has any authority whatsoever to assume for
Masonite any other liability or responsibility in connection with the door warranted herein.
If you have a warranty claim, please notify your Masonite Dealer. Include in the notice the following
information:
A. description of door;
B. name and address of owner and installer;
C. proof of sale; and
D. detailed explanation of defect.
May 1, 2017 W-8
Manufactures warranty subject to change without notice
LIMITED 5 YEAR WARRANTY
24-Gauge Wood-Edge Steel Entry Doors
Subject to the limitations and conditions set forth below, Masonite warrants the door will be free of
manufacturing defects in material and workmanship for a period of five (5) years from the date of
its original installation. Masonite grants this warranty only to the original purchaser of the door and
the original purchaser of the building where the door was installed. THIS WARRANTY IS NOT
TRANSFERABLE.
The warranty excludes any defects in the coating on the door or any glass inserts or other acces-
sories. Also excluded from the warranty are defects resulting from (1) exposure to acid, chemicals
or fumes; (2) improper use; (3) improper installation; (4) improper maintenance; (5) water-related
damage; or (6) a failure to follow any applicable installation, care or maintenance instructions.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR
IMPLIED, INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE AND MERCHANTABILITY. MOREOVER, IN NO EVENT WILL MASONITE
BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. This war-
ranty gives you specific legal rights. Other rights vary from state to state and may apply to you.
Some states and federal laws do not allow the exclusion of implied warranties. In the event these
laws apply, then the length of any implied warranty shall be one (1) year or the shortest time in
excess of one year permitted under applicable law. Similarly, some states do not allow the exclu-
sion or limitation of consequential damages and, if applicable, this limitation will not apply.
If a defect occurs, Masonite, at its sole option, will furnish a replacement door, repair the door or
refund the original purchase price. MASONITE’S MAXIMUM LIABILITY IS LIMITED TO
THE AMOUNT OF THE ORIGINAL PURCHASE PRICE. MASONITE WILL NOT PAY
THE COSTS OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENT
DOOR. No representative of Masonite or any other person has any authority whatsoever to
assume for Masonite any other liability or responsibility in connection with the door warrant-
ed herein.
If you have a warranty claim, please notify your Masonite Dealer. Include in the notice the follow-
ing
information:
A. description of door;
B. name and address of owner and installer;
C. proof of sale; and
D. detailed explanation of defect.
May 1, 2017 W-9
Manufactures warranty subject to change without notice
LIMITED 1 YEAR WARRANTY
26-Gauge Wood-Edge Steel Entry Doors
Subject to the limitations and conditions set forth below, Masonite warrants the door will be free of
manufacturing defects in material and workmanship for a period of one (1) year from the date of its
original installation. Masonite grants this warranty only to the original purchaser of the door and the
original purchaser of the building where the door was installed. THIS WARRANTY IS NOT
TRANSFERABLE.
The warranty excludes any defects in the coatings on the door or any glass inserts or other acces-
sories. Also excluded from the warranty are defects resulting from (1) exposure to acid, chemicals or
fumes; (2) improper use; (3) improper installation; (4) improper maintenance; (5) water-related dam-
age; or (6) a failure to follow any applicable installation, care or maintenance instructions.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
MERCHANTABILITY. MOREOVER, IN NO EVENT WILL MASONITE BE LIABLE FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific
legal rights. Other rights vary from state to state and may apply to you. Some states and federal laws
do not allow the exclusion of implied warranties. In the event these laws apply, then the length of any
implied warranty shall be one (1) year or the shortest time in excess of one year permitted under
applicable law. Similarly, some states do not allow the exclusion or limitation of consequential dam-
ages and, if applicable, this limitation will not apply.
If a defect occurs, Masonite, at its sole option, will furnish a replacement door, repair the door or
refund the original purchase price. MASONITE’S MAXIMUM LIABILITY IS LIMITED TO
THE AMOUNT OF THE ORIGINAL PURCHASE PRICE. MASONITE WILL NOT PAY THE
COSTS OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENT DOOR.
No representative of Masonite or any other person has any authority whatsoever to assume for
Masonite any other liability or responsibility in connection with the door warranted herein.
If you have a warranty claim, please notify your Masonite Dealer. Include in the notice the following
information:
A. description of door;
B. name and address of owner and installer;
C. proof of sale; and
D. detailed explanation of defect.
May 1, 2017 W-10
Manufactures warranty subject to change without notice
PRODUCT WARRANTY
For Masonite Specialty Glass
Warranty Coverage
In order to validate your warranty, all frames must be finished
in accordance with manufacturer’s recommendations. Subject to the conditions, exclusions and limitations stated herein, Specialty Building
Products warrants that its product is free from any defects in material and workmanship that renders
its product unfit for its normal and recommended use. This warranty applies only to the original purchaser of the glass purchased directly from
Specialty Building Products. This warranty is not transferable or assignable. The period of warranty shall begin as of the date of purchase by the
customer and shall extend for the products respective warranty period.
Exclusion
This warranty does not cover any of the following:
1. Any defects or damages arising out of and/or
caused during shipment by common carriers, private transportation, or any other means of transportation.
2. Any defects or damages arising out of improper maintenance, installation, handling, cleaning,
finishing, glazing, misuses, abuse, acts of God, accidents, and/or any other circumstances beyond
the control of Specialty Building Products.
3. Any product installed in, or submitted to high heat conditions, high moisture conditions, high vibration, and/or extreme temperature
changes, or painted a dark color or installed behind a screen door. Products with Centurion frames can be: submitted to high heat
conditions, painted a dark color, installed behind a screen door.
4. Labor, shipping, or other charges incurred
or claimed by the customer.
Inspection and Discovery of Defect
It is the customer’s responsibility to inspect the product immediately upon receipt of shipment. If a defect covered under this warranty is
discovered upon such inspection, the customer shall immediately file a claim in accordance with the proper procedure as set forth below.
Specialty
Building Products shall have no obligation with respect
to any defect reasonably discoverable upon immediate inspection, when such defective product is installed (or otherwise used) prior to properly
filing a claim. If a defect is discovered after receipt of shipment but within the products warranty period, the customer shall immediately file a
claim in accordance with the proper procedures as set forth below.
Warranty Claim Procedures
The customer must comply with the following procedures to make a proper claim under this warranty:
1. The customer must present a written claim to Specialty Building Products within 30 days after discovering a defect. The written claim
must be received within the products warranty period.
2. The customer must provide the following information in its written claim.
a) adequate description of the claimed defect(s);
b) identification of product design or pattern;
c) date of purchase, place of purchase, purchase price, and date of delivery to customer.
3. The customer must, if requested by Specialty Building Products, permit Specialty or its representative to inspect the product or if
requested return product freight prepaid for inspection.
Masonite®, “Masonite. Open to extraordinary™” are trademarks of Masonite International Corporation. Please check with your Masonite dealer or distributor for current warranty terms and conditions. 12/16 Printed in the USA ©2016 by
Masonite International Corporation
www.masonite.com
Rev. B 05/10
PRODUCT WARRANTY
CONT'D
For Masonite Specialty Glass
Remedies
1. After receiving a valid claim, Specialty
Building Products has the option to
a) repair the product or
b) provide a replacement product (or part, as appropriate) of like kind and design.
2. Replacement of the insulated glass component of the product will result in the following charge to the customer based on a percentage of
Specialty Building Products then current wholesale price for a comparable product. Period after Purchase Amount of Charge to Customer 0 - 5
years none
6 - 8 years 25%
9 - 10 years 50%
3. If Specialty Building Products elects to provide a replacement product, the limited warranty on the
replacement product will last for the balance of the warranty on the original product. If the customer fails to provide a satisfactory proof of the date of
purchase, the date such product was manufactured shall be used.
Disclaimer of Warranty
Specialty Building Products makes no other warranties, expressed or implied, statutory or otherwise, with respect
to its product (or any other replacement product), including
any warranties of merchantability or fitness for a particular purpose, except to the extent provided herein.
Limitation of Remedies
The remedies set forth above are the customer’s exclusive remedies for breach of warranty or negligence. In no case shall Specialty Building Products
be liable to the customer or any other person for any general, incidental, or consequential damages.
UNLESS MODIFIED IN WRITING SIGNED BY BOTH SPECIALTY BUILDING PRODUCTS AND THE CUSTOMER, THIS WARRANTY IS THE
COMPLETE
AND EXCLUSIVE WARRANTY RELATED TO THE PRODUCT, AND IT SUPERSEDES ALL EARLIER AGREEMENTS. NO EMPLOYEES OF
SPECIALTY BUILDING PRODUCTS AND OR ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY ADDITIONAL WARRANTY.
INVALIDATION OF ANY ONE OR MORE OF
THE PROVISIONS OF THIS WARRANTY
SHALL NOT INVALIDATE OR EFFECT ON
ANY OF THE OTHER PROVISIONS.
Masonite®, “Masonite. Open to extraordinary™” are trademarks of Masonite International Corporation. Please check with your Masonite dealer or distributor for current warranty terms and conditions. 12/16 Printed in the USA ©2016 by
Masonite International Corporation
www.masonite.com
Rev. B 05/10
HANDLING AND FINISHING INSTRUCTIONS
The following instruction must be followed or the warranty will be void.
All doors require sanding before being finished. All dust must be removed before
finishing. Minor glue marks can and should be removed and sanded clean. These are
not considered a defect.
Lemieux Doors Inc. is not responsible for natural characteristics in grain patterns,
shading or color differences in any wood species. All doors must be stored flat in a
climate controlled environment on the jobsite.
Any door with noticeable defects must be rejected prior to finishing. Slight seasonal
shrinkage and/or swelling is very common. A minimum of 60 days (to acclimate)
is required before credit can be given.
Lemieux does not recommend staining or painting any product that has exposure to
direct sunlight a dark color.
ALL DOORS MUST BE SEALED WITHIN 72 HOURS OF ARRIVING ON A JOBSITE.
All exterior products must be protected by a substantial overhang. Place all products in a
low risk environment, including and not excluding a sufficient overhang. Adequate
overhang is determined as one half the distance from the bottom of the door to the
bottom of where the overhang begins.
Lemieux is NOT responsible for any re-hanging or refinishing charges.
IF YOU PAINT
Use an Oil based primer and finish paint. If the door is pre-primed by Lemieux, use
two coats of an Oil based finish paint. You must seal all six sides. If the top and/or
bottom of the door is not completely sealed the warranty will be void.
IF YOU STAIN
Use an Oil based stain. If you do not use an oil based stain, then you must use a pre-stain
conditioner or sanding sealer. Do not use a 3-in-1 stain that penetrates, stains and seals.
Stain all six sides. Once staining is complete, seal all six sides (twice) with a Spar Varnish
or Spar Urethane. If you do not seal all six sides the warranty will be void.
PATTERN GLASS
If the product has patterned glass and if the pattern is facing to the exterior (outside
the home) you must place a cap bead of clear Silicone around the perimeter of the
glass or the warranty is void.
YOU MUST
Make sure that there are NO gaps where th e panels meet the stiles and rails. Lap the
paint or Spar Varnish onto the glass 1/16 of an inch. If you do not lap the paint or
Varnish, you must put a cap bead of clear S ilicone around the perimeter of the glass.
Any door placed in a high risk environment must have a clear Silicone cap bead around
the perimeter of the glass on the exterior side of the product.
ALL DOORS MUST BE SEALED ALL SIX SIDES OR THE WARRANTY IS VOID!
May 1, 2017 W-12
Manufactures warranty subject to change without notice
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
2020 Price Catalog BWI_
Discover the best professional documents and content resources in AnyFlip Document Base.
Search