Flower Pot Flower pot is made of throw able tyres. It can be car tyres, motorcycles tyres of others. Tyres usually well-known in the making of reusable flower pots. It is because tyres can able to contain the soil for a long time since the surface of tyre is strong enough. Firstly, make sure the tyre in not usable anymore. Then, place it at the garden or any other preferable spots. Pour enough soil into the tyres until cover the entire middle space of the tyre. Then, plant the plant we want in the middle of the soil. As the flower pot is ready together with the plant, do water the plant every day.
Glass Chandelier Glass chandelier is a type of grand luxury decorative light which usually can be seen in high class interiors. Original materials used to create this light is expensive, but it can be also done in cheaper budget if reuse materials being used. First, do a sketch of the design as planned to make this glass chandelier. Then, gather materials, such as glasses, mounting board, nails and glue. Cut the glass into pieces as per the design. Then, shaping the mounting board to form the circular curve. Repeat the same process three times by creating same curve but in various sizes. Fix some holders onto the sides of the mounting board and insert nails. Then, paste the glass pieces by covering the entire 360 degrees of the light. Now, test the light by turning on the light.
Piece of art is an artwork made of reusable materials. It is in form of sculpture. As usual, do sketch the design of the sculpture as a first progress. Then, gather reuse materials that needed to create the sculpture. When all the materials are ready, do start the building stage of it. Make sure creator should have enough time to complete the sculpture. Finally, this piece of art is ready. Piece Of Art
Broken bangle light is a decorative light which made of uncountable broken pieces of bangles. Those broken pieces of bangles being used for the light with the method of pasting by covering the entire surface of the light. The beauty of this particular light is it delivers colourful lights at the same time through those broken pieces. As the making process, first gathered broken pieces of bangles as much as possible. Then, prepare a glue which make every broken pieces to stick stronger on the light’s surface. Do not rush during the pasting stage of those broken pieces. After pasting, do fix the light’s surface onto the bulb. Finally, turn on the light to get colourful Broken Bangle Light
50 REUSE IDEAS - B EY O N D C R E A T IVI T Y -