Window Hardware Parts

B BLAINE GP
SERVICE AND SUPPLY

CHICAGOLAND’S LEADER
IN REPLACEMENT WINDOW AND

DOOR HARDWARE!

708-343-8800

www.buyblaine.com

24 hour fax: 855-898-6471

e-mail: [email protected]
1644 N. Mannheim Rd., Stone Park, IL 60165

“The Place to Start When You Need a Part”

B

BLAINE SERVICE Andersen & Truth Hardware featured throughout this catalog. We have
& SUPPLY an extensive line of hardware available.

ORDERING INFORMATION

Ordering Information: Our catalog has been responsibility for filing claims and damages. Please
designed to make ordering as easy as possible. It inspect all freight for visible damage prior to
is not possible to list all of the items available accepting. Do not accept cartons which show
through Blaine. If you need items, that do not damage or are open. Claims for concealed
appear in our catalog, please send a sample to our damage must be made by the buyer, with the
Research Department at 1644 N. Mannheim Rd., carrier, within ten (10) working days.
Stone Park, IL 60165. To help expedite your orders, Original shipping carton must be retained.
please use our part numbers, quantities required. Shortages must be reported to us at 708-343-8800
Delivery Status: Any delivery dates set forth by within ten (10) working days.
Blaine Service & Supply are estimates only and are
not intended as a guarantee of date of delivery. Returns: All returns / exchanges must be made
Our pledge is for quick and efficient processing of within 30 days from receipt of material. Shipping
your order. However, due to the nature of our charges will not be credited on returns unless
business, stock shortages may occur from time to authorized in writing by Customer Service. Any
time. Items will remain on back-order until shipped. unauthorized returns will be refused. A restocking
Blaine Service & Supply will not be liable for any fee of 30% will be charged for returns when the
delay in delivery or failure to deliver any or all of the customer ordered incorrectly. We strongly urge
goods in case such delay results from causes you to send a sample to eliminate doubt when
beyond our control. Order status may be obtained placing orders. Special order or custom made parts
by calling our office at 708-343-8800. are not returnable unless defective.

Damages / Shortages: All material, in transit, is
the property of the buyer and buyer assumes all

buyblaine.com

Terms & Conditions and Second Day service when requested. The
Credit Policy: Terms are net 30 days for open customer is responsible for all shipping charges
account customers. All other orders must be pre- unless otherwise specified. Common carrier
paid or shipped C.O.D. unless otherwise specified. service is also available. An $9.50 minimum
Partial payment in advance may be required with an shipping and handling charge is applied to each
order. We accept all major credit cards. order. Actual shipping charges will be added when
Special Orders: Non stock parts (special orders) minimum is exceeded.
may require a minimum order quantity.
Stock Parts : For orders less than $25.00, there State Sales Tax: Customers exempt from state
will be a $5.00 processing fee. sales tax must provide a certificate of exemption
Freight: All shipments will be made by the carrier with initial order.
of our choice, usually U.P.S. or Post Office., unless
specified otherwise. We also offer UPS Next Day Samples: Can be sent to our Research
Department or e-mail photos to:
[email protected]

A.C. Locks.................................................. 34 - 35 Patio Door Track...............................................64
Andersen Hardware......7,8,11,15-16,29, 37, 50, 72
Awning / Jalousie Operators.........................9 - 14 Pella....................................................... 7,8,15,37
Balances / Jambliners /Tape.......................40 - 50 Pressure Shoes & Accessories.........................55
Biltbest............................................................. 14 Push Bars.........................................................2. 0
Cam / Locking Handles...............................29 - 34 Remote / Clerestory Operator...........................1. 7
Casement Operators.................................3 - 8, 14 Sash Pulleys, Weights & Chain........................5. 1
Corner Keys / Tilt Keys / Slidebolts.............57 - 58 Screen Hardware/Frame/Spline/Wire.......7. 7 - 79
Crank Handles....................................................1.5 Skylight Hardware................................1..3,18 - 19
Door Closers - Commercial........................27 - 28 Spring / Transom Catches................................35
Drapery Hardware.............................................56 Sweep Latches..........................................3.6 - 38
Glazing Spline...................................................6. 3 Tilt Latches................................................5.2 - 54
Hinges (Biltbest / Cupples / Truth).........14, 20 - 27 Toilet Compartments / Grab Bars...............73 - 76
Horizontal Slider Hardware.................................39 Tracks / Channels / Guide Bars (Window).........16
Jamb Stretchers..................................................45 Truth3...- 6, 9 - 13, 15 - 26, 29, 31, 33, 34, 36, 38-39
Patio Door Guides...............................................72 Venetian Blind Hardware................................ 56
Patio Door Handles.....................................65 - 67 Vent Arms........................................................ 27
Patio Door Roller Assemblies......................67 - 72 Weatherstripping.............................................64

GP-2 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE CASEMENT OPERATORS
& SUPPLY
Order track no. 30473 track for
15.31.XX.051 As shown 9-1/2" 15.31 and order 30150 track for
15.31.XX.052 Opposite 9-1/2" 15.32, sold separately.

15.32.XX.051 As shown 13-1/2" Handle sold separately. Order no.
15.32.XX.052 Opposite 13-1/2" 10579

15.39.XX.051 As shown 6" Mounting screws included
15.39.XX.052 Opposite 6"

15.56.XX.051 As shown 7-1/2"
15.56.XX.052 Opposite 7-1/2"

Arm Lengths: 6", 7-1/2", 9-1/2", 13-1/2"

9/16"

Specify arm length Blaine Part No. Hand Arm Length Color
6"
Flat Arm, Side View 15.39.29.052 R 6" Gold
Open Position 15.39.29.051 6" Gold
15.39.32.052 L 6" White
Flat Arm, Side View R 6" White
Closed Position 15.39.32.051 L 6" Chestnut Brz
15.39.23.052 7-1/2" Chestnut Brz
Note: 15.39.23.051 R 7-1/2" Beige
Bronzes are painted with a L 7-1/2" Beige
metallic finish. 15.56.24.052 R 7-1/2" Clay
Please specify color. 15.56.24.051 7-1/2" Clay
Please send sample for 15.56.22.052 L 7-1/2" White
positive identification R 7-1/2" White
15.56.22.051 L 7-1/2" Bronze
15.56.32.052 9-1/2" Bronze
15.56.32.051 R 9-1/2" Gold
L 9-1/2" Gold
15.56.03.052 R 9-1/2" Beige
15.56.03.051 9-1/2" Beige
15.31.29.052 L 9-1/2" Clay
R 9-1/2" Clay
15.31.29.051 L 9-1/2" White
15.31.24.052 9-1/2" White
15.31.24.051 R 9-1/2" Bronze
L 13-1/2" Bronze
15.31.22.052 R 13-1/2" Gold
15.31.22.051 13-1/2" Gold
15.31.32.052 L 13-1/2" Clay
R 13-1/2" Clay
15.31.32.051 L 13-1/2" White
15.31.03.052 13-1/2" White
15.31.03.051 R 13-1/2" Bronze
L Bronze
15.32.29.052 R
15.32.29.051
15.32.22.052 L
R
15.32.22.051 L
15.32.32.052
15.32.32.051 R
L
15.32.03.052 R
15.32.03.051
L

buyblaine.com GP-3

BLAINE SERVICE CASEMENT OPERATORS
& SUPPLY

15.10.00.002 as shown Top ENTRYGARD DUAL ARM OPERATOR
15.10.00.001 opposite "A" View 8-7/8”

15.16.00.002 as shown
15.16.00.001 opposite

15.14.00.002 as shown Stainless No. stamped on link No. Stamped
15.14.00.001 opposite Steel On Link
*"A"
15.15.00.002 as shown 20748
15.15.00.001 opposite 2-3/8" - 15.15.00

Link Offset

(UP) Top Clip Sold Separately: 3-5/16"- 15.16.00 20755
10579 Handle 3-15/16" -15.10.00 20810 or
Side View

10339 (LH) Bracket 15.14.00 20544

Please send a sample for or

accurate identification 10340 (RH) Bracket Other "A" Sizes also

30473 Track available. Refer to number
stamped on link.
*Other dimensions available. Please Inquire 10341 Cover

15.34.XX.053 As shown 9-1/2" Casement Operator Offset Arm
15.34.XX.054 Opposite 9-1/2"
1/8" Offset (Raised) Arm
15.35.XX.053 As shown 13-1/2"
15.35.XX.054 Opposite 13-1/2" 3"

Arm Lengths: 9-1/2", 13-1/2".

Truth Part No. Hand Arm Length Color offset 1-5/8"

15.34.29.054 R 9-1/2" Gold
15.34.29.053 L
15.34.32.054 R 9-1/2" Gold
9-1/2"
15.34.32.053 L White
9-1/2" White
Mounting screws included.

15.34.03.054 R 9-1/2" Bronze Handle and track sold
15.34.03.053 L
15.35.29.054 R 9-1/2" Bronze separately. Order handle part
13-1/2" Gold
15.35.29.053 L number 10579 and 30473 track

15.35.03.054 R 13-1/2" Gold Offset (raised arm),
13-1/2" Bronze
11" arm unavailable. Side View

15.35.03.053 L 13-1/2" Bronze Order 9-1/2" arm. Closed Position

Order track no. 30473 track for no.
15.34 and order track no. 30150 for
no. 15.35, sold separately.

15.11.00.001 As Shown Dyad Arm Operator 15.18.XX.052 As Shown Colors available
15.11.00.002 Opposite 3-15/16" 15.18.XX.051 Opposite include Bronze or
white painted
TOP VIEW 15.66.XX.052 As Shown finish. The color
15.66.XX.051 Opposite code is the 5th &
6th digit of the
Offset Down 15.67.XX.052 As Shown part number
15.67.XX.051 Opposite
LINK 3"
OFFSET 4-1/2"

SIDE VIEW

Link offset up

10341 cover sold separately. Clip
3/4”
No. 10579.XX crank handle
sold separately. 10579.XX crank handle sold separately.

Bracket For End of Link Sold Separately Sold Separately:
Order 12511.92 bracket for 15.11.00.002
operator. 10681 Bracket for operator shown
For 15.11.00.001 operator, order
12510.92 bracket. As Shown 10680 Opposite

03030-10-L/R Hinges **Snap stud

10579 Handle attachment on 15.18
model

GP-4 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE CASEMENT OPERATORS
& SUPPLY
15.30.XX.051 As Shown
52.01.XX.011 As shown 15.30.XX.052 Opposite
52.01.XX.012 Opposite
Dyad 4-1/2”
12” 3”
4-1/4”

Available in white, bronze or Available in coppertone or white
brushed copper nickel
For handle order 10579
For handle order 10579 separately
separately 23.02.XX.002 As Shown
23.02.XX.001 Opposite
15.72.00.002 As Shown
15.72.00.001 Opposite Available in aluminum, white
and chestnut bronze
4-1/2” Dyad
4-5/16” 13-1/2”

9/16” dia. roller

offset up

For handle order 10579 Sold separately: Rear mount
separately 10579 handle screw holes
30175 track
23.03.XX.001 As Shown 03030-10-L/R Hinges For front mount,
23.03.XX.002 Opposite 24.25 Locking Handle order 23.03-see
21088 Keeper below
13-1/2”
23.77.XX.001 As Shown
23.77.XX.002 Opposite

11”

3-7/8” For handle order 10579 For handle order 10579
4-3/4” separately separately

For 9” arm, order 23.04

00021 Specify Handing. 00026
Right hand shown.

9” 9-1/2"

Bronze painted finish 11/16” Specify Handing.
Left Hand Shown
Includes 3-7/16” Sold with #00308 Crank
Crank Handle. Order #00126
Handle 2-11/32" Track separately.

Replacement for
Hope's Operator
Red Bronze Housing

buyblaine.com GP-5

BLAINE SERVICE CASEMENT OPERATORS
& SUPPLY

23.01.XX.001 As Shown Face Mount 23.00.XX.001 As Shown Rear Mount
23.01.XX.002 Opposite 23.00.XX.002 Opposite

Face 9-1/2” Screws
Mount mount this
way 99--11//22””

3-7/8” In some cases the No. 3 Note: 9/16” dia.
4-3/4” position mounting screw Rear Mount roller
may need to be eliminated
#10579 Crank Handle sold or ground down in length Available in bronze, 10579 crank
separately. due to interference in the full aluminum, chestnut handle sold
closing position of the arm. bronze or white. separately.
Available in aluminum, Another alternative would be
bronze, chestnut bronze or to grind a notch in the arm to
white. clear the screw end.

23.49.XX.001 As Shown Dyad Operator 15.94.00.002 as shown Entrygard Single
23.49.XX.002 Opposite 15.94.00.001 opposite Arm Operator

#10579.XX Crank Handle Sold Separately. 10341 cover sold
separately.
8-1/2”
8-3/4" No Offset

Available in 7/16” offset down
bronze,white or
beige finish.

Clip is under link 4-7/16” #10579.XX Crank
handle sold
50.00.XX.012 As Shown separately.
50.00.XX.011 Opposite
Maxim Dual Arm Sold separately: 23.46.XX.001 As shown
Casement Operator 12510 Bracket 23.46.XX.002 Opposite
or
4-7/16” 12511 Bracket 4-1/2" No Offset
11576 Track
For link stud 11454 Crank Handle
bracket, order 12511
10579.XX crank
handle sold
separately

11576 maxim Clip is under link Stability tab available
track sold on Blaine part no. 23.59
separately Available in clay,
bronze or white Dyad Operator

23.59.XX.002 As Shown Dyad Operator 23.54.XX.001 As shown
23.59.XX.001 Opposite 23.54.XX.002 Opposite

5” 4-1/2”

4-1/2” No offset

No Offset 10579.XX Handle
sold separately.
10579.XX crank
handle sold
separately.

Stability Tab Clip is under link

Available in white, coppertone or beige. Available in clay
or white.

GP-6 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE CASEMENT OPERATORS
& SUPPLY

00017

*Specify 6”, 9”, 10” or 11” arm A. Arm Length: 6”, 9”, 10”, 11”
B. Arm Thickness: Specify 1/8”
*Arm Length
or 3/16”
Custom C. Standard Housing
Manufactured
Thickness: 5/8”
D. Select Type of Guide

Required. Guide “A”, “B” or
“C”

Call for finishes & pricing

Specify Handing. 3-7/8” 9/16” 3/4” 19/32” 1-1/8”
Right Hand Shown 4-3/4”
1”
Includes crank
handle Guide A Guide B Guide C

00020-9” Arm Specify Handing. Right Hand 00011
00015-8” Arm Shown

Specify 8” or 9"

9”

Includes crank handle

3-7/8" 3-3/8”
4-3/4" 4-1/4”

All available in aluminum Includes Specify Handing. Bronze painted finish
or bronze painted finish crank Right Hand Shown
handle

00007 Non Handed 08458 Crank Handle And Cover Sold
Zinc Plated Steel* Separately. Order
No. 327 Crank Handle And No.
15/16" 9-1/4" 8459 Cover.
Escutcheon
6-1/4”
#130
#367 *Older style
may
5" measure 3/4"

10”
8”

*other finishes available 6" 9/16"*

No. 00367 Crank Handle and No. 00130 Track Included Specify Handing. Zinc Plated Steel
00058 Right Hand Shown Bronze Painted Finish
02073-9”
02073-11”

* 9-1/4" or 10-1/4"

9” or 11”

1-1/2” 1-1/2”

. Offset-
Specify Handing
Left Hand Shown down

3-7/8" *Arm measured from gear Crank handle, 3-1/8”
center to shoe rivet center. shown at right,

sold

00058-2 Crank Handle separately.
sold separately
No. 00058-Channel Order Specify Handing.
Track sold separately. 000975-1-038 Right Hand

Shown

buyblaine.com GP-7

BLAINE SERVICE CASEMENT OPERATORS
& SUPPLY

10002 00013
1-3/16"
10002-1 bracket Specify Handing. May require No. 00157
sold separately Right Hand Shown bracket to install

6-1/4” Painted Die Cast Housing

2-3/4" 10-3/4"

Specify Handing. Right Top View Of Housing
Hand Shown
3-7/8" End View Of Arm Bracket
58-2 Crank Handle 3/4" 3/4"
Sold Separately
1" 1"
Clay Painted Finish
00025 Replacement for Hopes Specify
00024 Arm Length 9-1/2". Handing.
Right
9" Hand
Shown
4-1/8" hole centers
See
Sold with Nickel, Red Bronze & 00025-S,
#00301 Painted Housing Below
Crank 00025-S
4-1/4" & 5-1/4" Right Hand Handle.
hole centers Shown Order 9”
#00126
Painted Die Cast Housing Track 4-1/8”
Arm length 9". separately.

01238 08453

Specify Handing. 3-7/8" & 4-3/4 Specify Handing. Left
Right Hand Shown hole centers Hand Shown

Arm Length 9”
9" & 11".

3-7/8”

Nickel Bronze or Red Bronze 4-3/4”
Housing
1/16"

00010 Fenestra Specify Handing. 10451 Pella
9” Right Hand Shown 5”

4-1/4” 4-1/8” Specify Handing.
Right Hand Shown

Also see: 00010-S,
below

00010-S

9”

4-1/4” Order 000327 crank handle separately

Replacement Phone: (708) 343-8800 Fax: (855) 898-6471

GP-8

BLAINE SERVICE AWNING / JALOUSIE
& SUPPLY OPERATORS

22.10 Front Mount Aluminum & Vinyl Window
22.19 Rear Mount Awning Operator

24" Blaine Part No. Arm Length Color
Order 10579.XX crank 22.10.01.102 24" Aluminum
handle separately 22.10.22.102 24" Clay
22.10.32.103 24" White
Track No. 30169 - 27-3/4”length 22.10.23.104 24" Chestnut Brz.
11.43.00.001 20-1-8” (A) 22.10.03.102 24" Bronze
11.44.00.001 28-3/4” (A) 24" White
* 22.19.32.001*
“A”
*Note:
30591 Detach RM models have rear threaded holes for rear
Clip S.S. mounting.

Guide Bar *Number 10341 Cover sold separately.

Number 10579 crank handle sold separately.
Order handle color to match the cover.

Shoes sold separately . 31641 Guide Bar
Order number 10005 10005 Shoe Studs
10341.XX Cover
10579.XX Handle
31642 Guide Bar
30591 Detach Clips S.S.

Guide bar sold separately. Order number31641.92 (22-3/4") or 31642.92 (30-3/4").
22.21

"A"

Rear Mount Dimension
(Inside holes on front mount 6-1/8" c/c)

"B" Rear Mount (2 Holes)
or
10579 Crank Handle
Sold separately Front Mount (4 Holes)
*Order 20008 Sash Hook
separately Operator "A" Stabilizing "B"
Part No. 21-1/2" Mounting Tab Arm
Scissors Arm 22.21 21-1/2" Clearance
Operator For Awning 16" Front 1/4"
Windows 22.22 21-1/2"
Order 11/32"
22.23 Part
No. 11/32"
22.27 11481
1/4"

22.28 21-1/2" Rear 11/32"

22.29 16" 11/32"

buyblaine.com GP-9

BLAINE SERVICE OPERATOR COVERS, AWNING /
& SUPPLY JALOUSIE OPERATORS

5-1/4" Operator Cover

Covers

Color Plastic Color Metal

Beige 10341.24 Beige 11328.03
Bronze 10341.03 Bronze 11328.23
Chestnut Brz 10341.23 Chestnut Brz
Clay 10341.22 Clay 11328.32
Coppertone 10341.08 Coppertone 11328.02
Gold 10341.29 Gold
White 10341.32 White
Black Black

10.10 20-1/2” 20008 Hook 10.11.29.004 Gold 2-5/8" 20008 Hook
10.14 13-1/4”
2-5/8" 10.11.03.005 Brown Uses two hooks

Uses one hook

Arm Length: 22-3/8"

Specify 13-1/4" or 20-1/2"

*C = 1” *Trim Sill Gap *Trim Sill Gap If Your Trim Sill
C = 3/4” *Measure the distance from the bottom of the
mounting plate to the base (see drawing above). Gap Measures:
E = 1/2" Order the operator by the letter designation that 1" order c
corresponds to the measured distance.
F = 3/8" C = 3/4" order
E = 1/2" order
*Measure the distance from the bottom of the mounting F = 3/8" order

plate to the base (see drawing above). Order the

operator by the letter designation that corresponds to the

measured distance.

11.10.29.001 Gold 20-13/16” 11.14.29.001 Gold
11.10.03.001 Brown 20-13/16” 11.14.32.001 White
11.14.03.001 Brown
Wood Window
Awning Operator 2-5/8" 20008 Hook

20-13/16” Uses two hooks

24-7/8”

11.12 15-5/16”
11.30 11-3/8”

#10579.XX crank handle Wood Window Order 10579.XX crank
sold separately. Awning Operator handle separately

11.16.XX.001 01001
Clip
24-3/4”

3-5/8"

Shoe Stud Gold or
10005 sold separately. white
(2) required. finish

26-3/4” Order crank handle
separately:
7/8" 01001-1-060
2-7/8"
10579.XX Guide Bar 30568
sold sold separately.
separately.

GP-10 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE AWNING / JALOUSIE
& SUPPLY OPERATORS

51.00.32.011 Maxim Awning Operator 01285* *Long - 34”
White Finish 14-1/2” Short - 24-7/8”

11454.XX Crank handle *Specify *Please
sold separately. Bronze specify long
painted finish or short
11577.92 Track and arms when
slider assembly ordering
sold separately.
00975-1 crank
handle
sold separately

Rods sold separately:
Long rods:
order 01285-Rod
Short rods:
01285-short-rod

00005 00036

Standard Size Available in 24-1/2", 25-1/2", 27-3/4", 33", 39" Arm Lengths
31-1/2"

Sold with #00301 7/16" 7/16"
Crank Handle.
Also available in the Also available with 6-1/2"
TOP VIEW OF HOUSING following arm reverse arm guides TOP VIEW OF HOUSING
lengths: (on back of arms).
17", 23-1/2", 24", Same guides as 5-1/2"
27" standard no. 36. 6-1/2"
Order:
6-3/8" 00036-REV-27-3/4
7-5/16" 00036-REV-33
00036-REV-39

02020 Crestline 00738 Crestline

Extra 00014 Tooth Gears No. 00361 00014 tooth replacement
Also Available. Order Gold Crank gear for Crestline No.
00738. Covers no longer Handle 02020 Operator
available. Included

1-1/4”

3/8”

3-1/16” Custom Custom
Manufactured Manufactured

00800-A 00073-R

Sold 3-7/8” 5/16X 18 1-3/8" Right Hand Shown
as a Tapped 5"
kit 4-3/4”
Sold with #00320
4" Universal Operator Crank Handle.
White finish or
3-1/2" GP-11
3" Aluminum Available

Top View of Housing

3-7/8”
4-3/4”

buyblaine.com

BLAINE SERVICE 03718 AWNING / JALOUSIE
& SUPPLY OPERATORS

00077-Original unavailable. Replace with No. Aluminum Finish
00077, shown below, right.

ORIGINAL 00077 Right Hand Shown

Right Hand Right Hand Sold with
5" Shown Shown #00303
5/16 X 18 Sold with 2-1/2" Crank
Tapped #00344 Handle
crank 5-1/4"
handle.
5" 10-24 2-5/16"
Threaded 1-1/8"
5/16X 18 Stud
Tapped 1-1/2"
5/16" Hex

Original Unavailable MIAMI 00095 Most Popular
Replace with No. 00095, at right Aluminum
5/16X 18 Finish
ORIGINAL Tapped

5-1/8" Note: 1-1/2" 5-1/8"
5/16X 18 Offset Sold with
Tapped hole #00901 crank
handle.

Right Hand
Shown

00045 Stanley 00045-1/2 00054 Detroit Swing Lite
3/8" 45-1/2 currently 9”
1-3/4" Hex unavailable

5/16" 1/2” Sold with
Hex 3-1/2” crank handle

2" Left Hand Shown Custom
2-3/4" Bronze painted finish Manufactured
Order No. 00468-1" connector separately

Order No. 00322 crank handle separately
No. 00468-8" extension now unavailable.

22.29 2008 Flat

Rear Mount Operator Woodco

16” Tapped 1/4" - 28 2008-Offset

Tapped
1/4" - 28

4-11/16"

Flat 4-11/16"

Arm

7” Offset
Sold with
#00303 crank Arm

handle. Sold with #00303
crank handle.

GP-12 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE AWNING / JALOUSIE WINDOW ACCESS-
& SUPPLY ORIES / SKYLIGHT OPERATORS

00712 Ualco 00726 Ualco 00861

1/2" Die Cast 2"
Aluminum
1-13/16” 1-1/4”
Finish
1/4”
7/8” Hex

Operator for 1-1/2" 2-1/8”
Residential 00399
Sash. Use
1” with #00712 Uni-Jal Replacement
Gear, shown at Jalousie Operator
left and #00399
Crank Handle . Right Hand Shown
Both sold
separately.

02045 02048 5/16" Hole
R.O.W. 5-7/16" Diameter

4-1/16” TOP VIEW OF HOUSING

5/16” 3-7/8"
diameter

3-7/8” Now with new Sold with
4-3/4” style housing. #00303
Will differ crank
Right Hand Shown. For Left Hand, Order 02045-L slightly from handle.
the picture Right Hand Shown.

10637 with hex ball Manual Skylight 1-1/4"
10638 with hook Operator System
Straight Drive 42.75
Hex Ball Drive 30957

Collapsed 68” 10453 2-1/4”
Extended 120” Hook End

Specify hex ball or hook end 63/64"
1-3/8"
Recommended height range (from floor) 10-11/16”
7’ - 11’ (windows)
9’ - 15’ (skylights)

30662 Manual Skylight
Operator System
Hex Ball Adapter 31000 Eyelet Angle Drive 42.65
2-9/16”
Specify

45/64” Color

Includes set screw 2-1/4”

Available in
aluminum,
Note: chestnut
1. Hex ball adapters fit all truth operator bronze

splines (supplied with set screws)
2. Available in a color to match operator painted or 10-11/16"
3. Maximum operational angle, when used white Chain Opens 9"
with a hex ball pole, is 35 degrees
4. For use with manual operators where 1-13/16"
pole operation is required 1-1/4"

buyblaine.com GP-13

BLAINE SERVICE BILTBEST OPERATORS
& SUPPLY

OLD STYLE OPERATOR BOXES - OBSOLETE

Casement & Awning

Please send a sample for accurate OPERATOR REPLACEMENT*
identification To replace operator boxes, left, it is necessary to order a
complete kit with wood jamb stop, operator, track, crank
handle and screws.

CASEMENT REPAIR KIT

KIT NUMBER GLASS WIDTH SIZE* SILL LENGTH OPERATOR

08501-N-L-087 14-5/8" 16-1/8" TRACK
08501-N-R-087 14-5/8" 16-1/8"
08501-W-L-087 19-1/8" 20-5/8"
08501-W-R-087 19-1/8" 20-5/8"
08501-XW-L-087 24-7/16"
08501-XW-R-087 22" 24-7/16" WOOD JAMB
08501-XWE-L-087* 22" STOP
08501-XWE-R-087* 22" 24-7/16"
22" 24-7/16" Operator sold separately. Order CRANK

*Emergency Exit Model No. 15.31.XX operator.

Original locking handle #08410 cannot be Locking Handle

replaced. However, in many cases, it can
be repaired. Please send your broken
Custom handle to our Research Department for
Manufactured

an evaluation. 08410-L 08410-R

IMPERIAL CASEMENT HINGE REPLACEMENT FOR ALL WIDTHS

Hinge repair kits are furnished with instructions, fit all widths and are reversible to fit right or left hand vents.
Sold in pairs (1 pair repairs 1 vent). Order #08500-HINGE-050.

ROTO-LOK AWNING WINDOW HARDWARE KIT**

GLASS WIDTH X VERTICAL SILL LENGTH
KIT NUMBER HEIGHT* SIZE
JAMBS (w/ WEATHERSTRIP)

08500-A-087 19" x 14" 17-9/16" Pair (1) 21-5/8" **All Awning Kits come
08500-B-087 27" x 10" 13-9/16" Pair (1) 29-1/4" complete with screws,
08500-C-087 27" x 14" 17-9/16" Pair (1) 29-1/4" nylon spacers, crank
08500-D-087 27" x 18" 21-9/16" Pair (1) 29-1/4" handle and sash hooks.
08500-E-087 27" x 22" 25-9/16" Pair (1) 29-1/4"
08500-F-087 27" x 30" 33-9/16" Pair (1) 29-1/4" SASH HOOK (2)
08500-G-087 36" x 14" 17-9/16" Pair (1) 38-1/4"
08500-H-087 36" x 18" 21-9/16" Pair (1) 38-1/4"
08500-I-087 36" x 22" 25-9/16" Pair (1) 38-1/4"
08500-J-087 36" x 30" 33-9/16" Pair (1) 38-1/4"
08500-K-087 39" x 14" 17-9/16" Pair (1) 29-1/4"
08500-L-087 39" x 18" 21-9/16" Pair (1) 41-1/4"
08500-M-087 39" x 22" 25-9/16" Pair (1) 41-1/4"
08500-N-087 39" x 30" 33-9/16" Pair (1) 41-1/4"
08500-O-087 44" x 14" 17-9/16" Pair (1) 46-1/4"
08500-P-087 44" x 18" 21-9/16" Pair (1) 46-1/4"
08500-Q-087 44" x 22" 25-9/16" Pair (1) 46-1/4"
08500-R-087 44" x 30" 33-9/16" Pair (1) 46-1/4"

SILL STOP JAMB
STOP
OPERATOR CRANK
HANDLE (2)

GP-14 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE CRANK HANDLES
& SUPPLY
1"
Folding Handle

2-9/64"

11/32" Spline 2-9/64"
Diameter
3-3/32"
Color Standard "T" Round ADA
Aluminum 10579.01 Folding 11573.01 11660.01 11403.01
Powder Black 10579.02 11329.01 11573.02 11660.02 11403.02
Bronze 10579.03 11329.02 11573.03 11660.03 11403.03
Med. Bronze 10579.05 11329.03 11573.05 11660.29 11403.29
Gold 10579.29 11329.29 11573.29 11660.29 11403.13
Coppertone 10579.11 11329.29 11573.11 11660.11 11403.19
Bright Brass 10579.13 11329.11 11573.13 11660.13 11403.23
Antique Brass 10579.14 11329.13 11573.14 11660.14 11403.24
Brushed Nickel 10579.19 11329.14 11573.19 11660.19 11403.32
Clay 10579.22 11329.19 11573.22 11660.22 11403.37
Chestnut Brnze 10579.23 11329.22 11573.23 11660.23 11403.50
Beige 10579.24 11329.23 11573.24 11660.24
Cocoa Brown 10579.26 11329.24 11573.26 11660.32
White 10579.32 11329.26 11573.32 11660.37
Bright Chrome 10579.35 11329.32 11573.35 11660.50
Off White 10579.37 11329.35 11573.37 11660.51
Sandstone 10579.50 11329.37 11573.50 11660.53
Oil Rubbed Brz 10579.51 11329.50 11573.51
Brushed Chrome 10579.53 11329.51 11573.53 11660.78
Western Pewter 10579.55 11329.53
Brown 10579.75 11329.55 11573.78
Bright White 10579.78 11329.75
11329.78

00975 5/8" 00975-1 00058-2
Die Cast .350
1/4" dia"
Hex Diecast
3/8” dia.
UNAVAILABLE splined
hole
Die Cast

Bronze painted finish Bronze painted finish Clay finish
00327 3/8"
00301 Die Cast 00302-5/16* Die Cast
00303-3/8*

5/16" 2" *

Specify Bronze Avail. in Die Cast
or Aluminum aluminum or
Painted Finish Gold or
bronze Champagne
painted
finish. 00338

Diecast PART # "A" FITS Also 3/8"
Andersen available w/ Nickel Bronze,
"A" 00335-And 3/8” dia. Peachtree 19/64" sq. Red Bronze,
Specify 00335-9/32 29/32" dia. hole. Order Dark Statuary
color 00335-HEX 5/16" Hex Truth 338-Rem Bronze, Brown
00335-7/16" 7/16" dia. & Gray
11573.XX 11/32” dia. Pella
00335-3/8" 3/8" dia.

00335-Pella3/8” dia.

00367 5/16" 12905.XX 12616 RH Truth Encore
*Avail. Sq. Flip handle
Brass and cover 1-3/8” 12614 LH Tango
6" for
8" Entrygard 5-1/2” Specify Handle & Cover
16" operators 3-1/2” Color

Can be custom made Specify
to any length Color

buyblaine.com GP-15

BLAINE SERVICE TRACK, GUIDE BARS &
& SUPPLY GUIDE TRACK

00125 00126 Stainless
Steel
Actual Size

Actual Size Custom *Specify
Manufactured
*Specify

*Lengths Available: 10",11", 12-1/2" and 16-1/4". *Lengths Available: 12-5/8", 13-3/4" & 18".

00129 Aluminum 00058-Channel

13-5/8"

Actual Size

12-1/2" Actual Size 13-3/8"

02074 30175

Actual Size 14-1/2" 1-1/4” 13-3/4”
5-1/2” 6-1/4” Stainless Steel

Actual Size

30473.92 - 11-3/8” Actual Track for 15.10, 15.31 & 15.34 Operators
30150.92 - 13-3/4” Size 30473.92

*Specify Track for 15.32 and , 15.35 Operators
30150.92
Length

11577 Maxim Awning Track & Slider 02908
Assembly for 51.00 Operator

14-3/4” *Specify
16” Actual Size

*Lengths stocked: 6-3/16", 7-1/16", 9-1/2" & 12".
Other sizes available per customer request.

03033 Lengths Available: 12", 13" 30151.92 Track Length: 13-3/4"
Order 126-12-5/8” or 126 12-3/4”

Actual Size 13-3/4"
4-1/8"
Specify

Actual Size 30568
30150
13-3/4” 3-1/4” 26-1/8”
3-1/4” 3-1/4”

21/32” 43/64”

GP-16 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE REMOTE CLERESTORY
& SUPPLY OPERATOR

Remote Clerestory Operator

Operator Recommended Part No.
Location A Crank
02001-EX-4
See chart at right to Length 02001-EX-5
determine which 02001-EX-8
adapter is required Sill Mounted 8' - 9' 4' 02001-EX-12
for your installation. or 10' - 11' 5'
12' - 14' 8'
Casement 15' - 17' 12'
Style

APPROXIMATE "
DISTANCE -
FLOOR TO 60 Degrees
EXISTING Other Degree Options
WINDOW Available. Please Inquire.
OPERATOR

(A)

Adapter Window and / or Hardware ADAPTERS
Part No. Brand That Adapters Fit
02001-A
02001-P Andersen
20550
Pella
02001-PT
Biltbest, Caradco, Eagle, Hurd,
Truth and Weathershield

Peachtree

NOTE: One 2001 adapter is required for each
operable window.

Our adapters let you adapt our remote
crank to most popular window operators.
See chart for adapter part number with
corresponding window manufacturer.

01236 POLE HOOK

Specify Length

Pole Hook

*Available:

3', 4', 5', 6', 7', 8', 9', 10', 12', 13', 15', 16'

*10' through 16' shipped in Pole hanger #00143-029

two sections with coupler
joiner

buyblaine.com GP-17

BLAINE SERVICE Sentry II WLS Power Window/
& SUPPLY Skylight Systems

SKYLIGHT • Rain Sensor - standard with all *
OPERATORS kits, automatically closes the
window or skylight at the first *
Introducing Truth’s next sign of moisture. Corrosion
generation of power window resistant sensor decreases When used on awning windows,
systems. Sentry II WLS for maintenance cleaning require- the Sentry II WLS is designed to
windows and light skylights. ments and extends service life. work on awning windows with a
Based on the powerful and properly sized counter-balance
reliable mechanics from our • No special preparation is hinge (See Truth Tips) and
previous motorization system, required by the window or operator (Consult awning oeprator
we’ve added a new digital skylight manufacturer. The kits specifications).
electronics package with built in are suitable for new construc-
power conversion. The new tion or retrofit applications. Sentry II power window system is
Sentry II WLS system truly takes Please consult with your rated at 50 Watts.
over where Truth’s Sentry 2000 electrical contractor for a retrofit
left off. evaluation. CONTROL OPTIONS

The new electronics • ETL Listed and CE Approved. The Sentry II WLS kit comes with
package provides many new Meets all requirements for Class a standard wall control panel. The
features to enhance a II installations. same control panel can also
home’s comfort and its accept and control most
owner’s peace of mind. • Safety - Automatic motor reversal commercially available 12 VDC
has been engineered into the mini blinds (not provided by Truth
• Retrofits onto casement and system which is intended to Hardware). The panel also
awning windows and light reverse the motor should an provides feedback to the user via
skylights normally operated obstruction stop the window while a status light (LED). This small
with a hand crank manufac- closing. In addition, a screen LED shows when the motor is
tured by Truth Hardware (see interlock is provided which, when running, or if there are any
Truth Tips). The motor system properly installed, electrically problems during window or
drives the same input the disconnects the motor when the skylights operation.
handle is attached to. screen is removed. These
features are intended to help The optional RF Hand Held
• Power conversion built right prevent personal injury which Remote is available which adds
into the wall mounted control could result from reaching into even more flexibility and
package which accepts direct the window area during its convenience to a home’s windows
connection of 110 VAC power. operation. or skylights.
No more transformers to
complicate and add expense to • Motorized Sash Locks are
the installation. available for use with the WLS
system for casement and awning
• Power Blind System windows.
compatible. Centralized power
window system control is now • Building Automation
possible with Sentry II’s ability Systems can easily be tied into
to accept and control most 12 the control electronics for
VDC power blind systems. The virtually limitless ventilation
Sentry II’s remote and wall possibilities.
switch can be used to control
both window and blind motors
for convenient, centralized
control.

• Power Protected Memory SENTRY II WLS CAPACITY Important:
eliminates the need to “reset” or When used on light skylights, Electrical components
retrain the motor after a power Truth’s Sentry II WLS is load are generally not
outage. Once the installation is rated at 40 lbs at the chain. This returnable. However, a
complete the motor never needs equates to a total skylight hatch request for return will be
further service or adjustments - weight of 80 lbs. Contact evaluated on a case by
even after prolonged power your electrical contractor for a case basis. Please
outages. retrofit evaluation. contact Customer
Service to determine
• RF remote compatibility built When used on casement window, whether a return
into all motor control packages the Sentry II WLS is designed to authorization can be
as a standard feature. Simply work on all window systems provided.
order the optional remote to add meeting the AAMA-101 hardware
new and exciting control load requirements (See Truth Tips).
capability for the homeowner.

GP-18 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE Sentry II WLS Power Window /
& SUPPLY Skylight Systems

REMOTE FEATURES INCLUDE: ORDERING INFORMATION: 43.51.00.005 - Complete Unit
32013-.365
• Infinite number of windows and Ordering of the new Sentry II 12490.XX - Cover
skylights can be controlled with systems is much easier than in the 43.53.00.002 - (Optional) Hand
a single remote. past. All hardware necessary for
mounting the system on either a Held RF Remote
• 9 Zones or “unit codes” are window or skylight is now included
available to allow units to be in the same kit. Finish Codes: The WLS cover is
controlled in groups and available in 02 Black, 03 Bronze,
organized to a user’s needs. Special Note: Motor covers are 23 Chestnut Bronze, 24 Beige, 32
ordered separately to help keep White and 78 White.
• Motorized Blinds (supplied by your inventory costs down. Sentry
others) can be controlled with II motor kit packaging includes TRUTH TIPS:
the same remote. additional space so cover can be 1. Truth Hardware does not
added which allows the manufac- recommend the use of Sentry II
•Control windows and turer to supply a complete kit to the WLS on any casement window
skylights from one remote - The jobsite. system that does not meet AAMA
Sentry II HS (for 101 hardware load requirements.
large / heavy skylights) uses the WHEN APPLYING TO TRUTH All hardware and motor system
same remote as the Sentry OPERATORS - USETHE warranties are void if the window
WLS for coordinated ventilation FOLLOWING: system does not meet these
throughout the entire home or guidelines.
building. Order (1) each per window:
43.51.00.005 Sentry II WLS 2. Awning windows must be
• Built in Thermostat allows equipped with a properly sized
windows and skylights to open System counter balance hinge such as
and close together, to co- 12490.XX - Cover (.xx denotes Truth Hardware’s 13 series or 34
ordinate a comfortable interior series 4-bar hinges. If an awning
temperature. Takes advantage finish code) window is specified with butt (or
of true “chimney effect” cooling continuous) hinges, a skylight
to reduce energy demands. Order (1) Hand Held Remote operator and motor system must
(optional): be used. All hardware and motor
•Rolling Code Technology system warranties are void if these
proven in garage door openers is 43.53.00.002 - Hand Held RF guidelines are not followed (See
built into every remote to provide Remote Tech Notes).
high security and peace of mind.
If you are applying the Sentry II to a 3. Unless otherwise specified, the
WARRANTY: PELLA brand window you must Sentry II WLS power window
The Sentry II family of order the following items which system is designed to operate any
products is warranted for one include special hardware and properly sized rotary hardware and
year against defects in instructions. hinge system manufactured by
materials and workmanship Truth Hardware.
on all electronic and Order (1) each per window:
mechanical components. 43.54.00.005 - Sentry II WLS Use of the Sentry II WLS motor
system on windows or skylights
Consumer Notice: System - Pella with manual hardware manufac-
The Sentry II WLS power 12490.XX - Cover (.xx denotes tured by companies other than
system must be installed by a Truth Hardware is at your own
qualified electrician. finish code). risk. For verification, look for the
Truth logo / name stamped on the
PRODUCT APPLICATION Order (1) Hand Held Remote hinge and operator arm or consult
ASSISTANCE: (optional): with the window manufacturer.
If you need assistance with
product configurations to meet 43.53.00.002 - Hand Held RF 4. The Sentry II WLS system is
your needs, please visit our Remote rated for use in indoor applications
website at www.truth.com. only.
Under the “Technical Support” If you are applying the Sentry II to
tab you will find all of the an ANDERSEN brand window with INCLUDE TRUTH SPECS IN
technical information needed to a size .350” diameter splined shaft YOUR NEXT SKYLIGHT
properly configure and specify you must order the following items PROJECT:
all elements of an automated which include special hardware and
window installation, including instructions: Motorized system for skylights
installation instructions, (not exceeding 80 lbs), awning or
pre-wiring and proper 43.51.00.005 - Complete Unit casement windows.
hardware requirements. 32013-.365 - Complete Unit
12490.XX - Cover
43.53.00.002 - (Optional) Hand

Held RF Remote

If you are applying the Sentry II to
an ANDERSEN brand window with
a size .365 dia. splined shaft you
must order the following items
which include special hardware and
instructions:

buyblaine.com GP-19

BLAINE SERVICE TRUTH / ANDERBERG HINGES
& SUPPLY AND PUSH BARS

12.XX Truth / Anderberg/ 00601 00622 Bar length: 12”, 16”, 18”
Superior
Original 601 End Style
More Than 20 Variations. 1-3/16" 1-3/4” Available in nickel or
Please Send Sample dark statuary bronze
1-1/2”
1-3/4” 1-3/4” Ceco 1-3/4”

Telescopic 1-3/4” 1-3/4”

Available in
nickel or dark
Aluminum 1-1/2”

statuary
bronze
Bar length: 9”, 11”, 16”. Truscon /RepublicSteel

00628 Superior 00670-Short-10”* Gold painted 01627
Nickel Bronze 00670-Long-13-1/4”*steel
Dark Statuary 1-11/16"
1-3/8” 1-7/8" Caradco 1" Bronze 1-3/8"
1-7/8” 1-3/8" +2-3/8"
* 1/4" x 3/4" bar

3/16" x 1/2" bar

5/16" x 5/8" +For 3-1/4" yoke, order 1” **Bar Length: 11",
bar 670-Long-Spec
*Bar length: 10", 12",16", 18" & 24" 12", 13", 15", 16",
2-3/8” 17", 18" , 19"
& 25"

01631 04922 00613

*Bar Length: 10", 12" 5/8" 1-3/4”

* 1-3/8" 1-1/4" Expandable: 1-1/4" 15/16”
10-5/8" closed to Available in:
Available in brass 18" fully opened Dk statuary bronze
plated steel, solid Nickel Bronze
brass, antiqued brass Solid yellow brass bars with Red Bronze
or polished nickel. solid red bronze components

00627 01674 01675 Ware

Aluminum bar 3/16" 1-1/4" Ware Nickel Bronze
with nickel offset 2-1/4"
bronze 7/8" 1-7/16"
components
1-7/16" 5/8" 3/8" x 5/8" bar
3/8" x 5/8" bar 1" 57/64" 1-3/8"

**Bar Length: 12",
16"
1-7/16”

*Bar Length: 12",14", 18" Red bronze or nickel bronze

GP-20 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE AWNING / CASEMENT HINGES
& SUPPLY

TRUTH AWNING HINGES

Sold in pairs

L
1/2"

Blaine Part Number Truth Part Number Sash Height Max. Sash Hinge Track Material

Wt. Length "L"

02997-10-L/R-050 13.13.00.003 & 004 10 - 14" 7 LB 10" Steel
02997-10-L/R-034 13.43.00.102 & 202 10 - 14"
02997-14-L/R-050 13.14.00.003 & 004 14 - 19" 7 LB 10" Stainless Steel
20 LB 14" Steel
02997-14-L/R-034 13.44.00.202 & 203 14 - 19" 20 LB 14" Stainless Steel
02997-18-L/R-050 13.15.00.003 & 004 19 - 26" 38 LB 18" Steel
02997-18-L/R-034 13.42.00.102 & 103 19 - 26" 38 LB 18" Stainless Steel
02997-22-L/R-050 13.16.00.003 & 004 26 - 34" 50 LB 22" Steel
02997-22-L/R-034 13.45.00.102 & 103 26 - 34" 50 LB 22" Stainless Steel
02997-26-L/R-050 13.17.00.003 & 004 34 - 42" 61 LB 26" Steel

TRUTH CASEMENT HINGES

Sold in pairs

1/2”

L

Blaine Part Number Truth Part Number Hinge Track Material
03030-10-050 14.05.00.003 & 004 Length "L" Steel
03030-10-034 14.80.00.503 & 504 Stainless Steel
03030-14-050 14.17.00.005 & 006 10" Steel
10"
14"

buyblaine.com GP-21

BLAINE SERVICE TRUTH HINGES
& SUPPLY

GP-22 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE TRUTH HINGES
& SUPPLY

buyblaine.com GP-23

BLAINE SERVICE TRUTH HINGES
& SUPPLY

Definitions:
* Counter-Balanced: a pair of hinges will balance or hold open the vent/sash with no added friction at
the heights and weights listed in the chart.

**Ultimate: A pair of hinges will not balance or hold open the vent/sash without added friction at the
heights and weights listed in the chart.

Special NOTE: A properly counter-balanced sash may be important to obtain other important window
operating characteristics such as proper operation of a rotatory awning operator

GP-24 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE TRUTH HINGES
& SUPPLY

buyblaine.com GP-25

BLAINE SERVICE TRUTH LIMIT DEVICES / BUTT HINGES
& SUPPLY

Truth Standard Duty Limit Limit Device With Key Release Feature
Device With Key Release Part Number Track Length Bar Length

For key,
order
7/8” 16002

5” to 14” 3” 37.26.00.200 5” 5”
7/8” 37.27.00.200 6” 6”
Bar Length 37.28.00.200 7” 7”
5” to 14” 37.29.00.200 8” 8”
37.30.00.200 9” 9”
23/32” 37.31.00.200 10” 8”
3/8” 37.31.00.201 10” 10”
37.32.00.200 11” 11”
3-1/2” 37.33.00.202 12” 12”
37.34.00.201 14” 14”

Note:
1. Key allows you to detach support arm to open the
window further for maintenance.

2. A friction adjustment screw is provided in the shoe.
5/8”

99.20.00.001 Truth Loose Butt Hinge 3”
29.10.00.102 Left Hand Pair
29.10.00.103 Right Hand Pair

4-1/2"

5-29/64” 1-3/16”
3”
Limit Devices:
When properly installed and 1-3/16”
operated, the Limit Device will help
prevent damage to casement and Stainless
awning windows under high winds Steel
in high-rise applications. Two
different methods of disconnecting 13 gauge
the Limit Device from the sash for .093”
cleaning purposes - either by Left Hand
inserting a key, or by operating the
detach clip.

1-7/8”
Right Hand

GP-26 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE HINGES / DOOR CLOSERS
& SUPPLY

Used On Cupples Windows
A Custom

Manufactured

Blaine A B C
Part Number

00700-6 4-3/16” 5-9/32" 4"
00700-8 4-3/16” 6-13/32" 4"
00700-10 7-3/16" 7-25/32" 7"
C 00700-12 7-3/16" 11-9/32" 7"

B

Vent Arms - Custom Made To Size

VA0001 VA0002 VA0003 Specify
Aluminum
* Custom * *Please or Steel
Manufactured
send a *
sample or
request a
worksheet
from
Customer
Service.

Features:
•One 1461 Super stock
can be mounted three different ways.

1. Hinge Face 2. Top Jamb
3. Stop face (parallel arm)
•1461 Series is non-handed, non-sized
with spring power adjustable from size 2
through 6
•Delayed action optional.
•Heavy-duty forged main arm.
•Cast Iron cylinder.
•Full rack and pinion hydraulic action.
•Joints in arm and shoe adapt to uneven trim.
•Non-critical regulating screws are tamper resistent.
•10 year warranty ; UL Listings

Part No. DC0017-1461-037

Exterior or Interior Reg. EF GH I
Vestible Door Doors Arm
12-1/4" 1-1/8" 2-11/16" 2-3/8" 11-1/4"
2'0" (600 MM) 2'0" (600 MM) 1461
through through

4'0" (1200 MM) 5'0" (1500 MM)

buyblaine.com GP-27

BLAINE SERVICE DOOR CLOSERS
& SUPPLY

COMMERCIAL DOOR CLOSERS

MADE IN THE U.S.A.
FULL 10 YEAR FACTORY WARRANTY

CLOSER BODY Blaine Door Closers provide
narrow styling and
FEATURES installation versatility. They
Standard are ideal for use with
aluminum doors and
Parallel Arm Bracket frames, yet they make an
Non-Handed attractive installation on
Aluminum Alloy Shell wood or metal doors.
Adjustable Closing Speed
Adjustable Latching Speed Blaine Door Closers are non
Non-Hold Open handed and, for standard non-
Adjustable Power Shoe hold open or hold open
Adjustable Back Check applications, can be mounted
on regular and top jamb
Optional installations. An optional
mounting bracket is available
Adjustable Delayed Action Closing (ADA) for parallel installations.
Hold Open Arm
ADA Closer, shown
U.L. & U.L.C. Listing above, available.
Please call for
All Blaine door closers, with non-hold open details.
arms
or hold open arms, are listed by Underwriters SIZE SELECTION CHART
Laboratories under their continuing re-
inspection programs. MAXIMUM DOOR WIDTH

MODEL INTERIOR EXTERIOR
DC0002
DC0003 2'8" --
DC0004
DC0004 Econ 3'0" 2'6"
DC0005
DC0008 3'8" 3'0"

3’6” 3'0"

4’0” 3’6”

5’0” 4’6”

For ADA Door 13”
Closer, order
DC-8

COMPARISON CHART

FUNCTION Blaine Yale Norton Dorma LCN
Standard
Backcheck DC Series 50 1600 600 ---
Parallel Arm
Hold Open DC Series-BC 50BC 1600BC 610 1070

DC Series-PA 50 1600PA 600PA 1070P

DC Series-HO 150 1600H 600FHO 1070H

GP-28 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE LOCKING HANDLES
& SUPPLY
16.52.XX.300
16.16.XX 16.18.XX.210 16.53.XX.300*-upper
LH Shown 16.19.XX.210*
2-1/4”

2-3/8" hole 2-5/16”
centers
2"

2-9/16" x 3" 1-3/8" Non-handed
housing Home Gard *16.53 is tie bar

3/8" Primary Sash compatible
1-3/4"
Sold w/keeper Lock (Lower)
no.20034 (non 35/64"
handed) *16.19 is tie Non handed Keeper sold *Non Handed
bar compatible Low profile separately: Home Gard
Secondary (Only)

Cannot be used with tie 40902 LH Sash Lock
bar for tandem application 16.18 & 16.19 sold w/std kpr no. 31344. 40903 RH (Upper w/o lever)

00101 00109-New Right Hand Shown 00135

9/16" 1/2"
2-5/8"
Right 2-1/16"
Hand
Shown 2-1/2"
15/16"

2-5/8" 00109-Old Nickel or
med.
1-7/16” statuary Right
bronze Hand
2-5/16" Handle offsets to the Shown
right for right hand.
Handle offsets to the Specify painted
right for right hand. bronze or 09498
painted silver
Stamped Steel Gray or Brown satin. 3/4"
finish 04979 Left Hand

00430 3/8"

Non- 11/32”
Handed

2-3/8" 2-5/16"

Nickel or Left Hand
Red Bronze Shown

Nickel Bronze
or Red Bronze

24.13.XX.202 Lower 24.13.XX.203 Upper 24.25.XX.300
Bronze painted,
1/2" Several Several 1/2" coppertone or white
2-3/8" finishes finishes
available available 7/8”
2-1/2"
Tie Bar
Connection Multi Point Locking
System
2-3/8"
GP-29
Tie Bar For 3/8" gap order:
Connection 24.12.XX.200 Lower
24.12.XX.201 Upper

buyblaine.com

BLAINE SERVICE I.G.W. / PROJECT OUT
& SUPPLY CAM HANDLES

04840 Right Hand Shown 04928 Winco 08366

1/2” 7/16” 9/16”

1-7/16”

1-3/8” 1-1/2” Nickel Bronze
Nickel Bronze
Available in
Nickel Bronze Right Hand Shown Right Hand Shown
or Red Bronze
10194 12501 Left Hand Shown 12510 1-3/8”
Mason Mason 1-7/16”
1/4” 1-3/8” 1-1/2”
1-1/4” 1-1/2” 1/2” Lug
1-7/16” Gap

For ring handle,
3/8” order 12511

Right
Hand
Shown

For non-pole ring handle, order 12500 Available in red bronze, nickel
For 1/2” lug, non pole ring, order 12510
bronze or dark statuary bronze
powder coat

21337 Nickel Bronze 27.19

7/16”

1-7/16” PROJECT
9/16”
1-1/2” OUT

CAM

HANDLES

Right Left Hand Shown 00201 Right Hand Shown
Hand 00191
Shown Nickel Bronze

00192

21/32” nose reach

1-1/2" 1-1/2" 1-1/2"

Custom Project Out 1-1/2” Available
Manufactured Angle in Nickel
Adapter 5/16” from Bronze
back of and Red
base to Bronze
underside
9/32" of nose
Right Hand Shown

GP-30 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE PROJECT OUT CAM
& SUPPLY HANDLES

08317 Lupton 04954 08485 Nickel Bronze
Nickel Bronze 1-1/4” Dark Statuary Bronze
Hopes Red Bronze
9/16”
Right Hand 3/16" Red Bronze
Shown
1-1/4” 1-1/2”

1-3/8" Right Four hole Right Hand
For upper Hand mount Shown
fastener, Shown Right Hand
order 4954- Shown
upper. 1/4”
Specify left or
right

Other variations available

09467 Lupton 10076 Nickel Bronze 10741 Red Bronze
3/4”

7/16”

1-3/8”

1-1/2” 7/16” 1-1/4”
underside
nose 13/32”
height
Left hand only as shown
1/4” 25.29.XX.102 as shown
25.29.XX.103 opposite
Right Hand Shown Right Hand Shown
Truth
12600 Mason 12601 Mason

available in red bronze, nickel available in red bronze, nickel
bronze or dark statuary bronze or dark statuary
bronze powder coat bronze powder coat

21/32” nose 21/32” nose

*Right reach *Right reach 1-1/2”
19/64” from back
Hand 19/64” from back Left hand shown
Hand of base to Shown of base to 27.32.XX.103 as shown
underside of nose 27.32.XX.102 opposite
Shown underside of nose

* 1-3/8”, 1-7/16”, 1-1/2” * 1-3/8”, 1-7/16”, 1-1/2”

25.31.XX.103 as shown 27.25.XX.103 as shown
25.31.XX.102 opposite 27.25.XX.102 opposite

1-1/4” 1/4”
1-1/2”
1-1/2” 9/16” Nose Reach 1-1/2”
From Base Edge 7/16” 9/16”
To End Of Nose

buyblaine.com GP-31

BLAINE SERVICE I.G.W. / THRU-RAIL
& SUPPLY CAM HANDLES

08487 08774 Right hand shown 12610 Mason
Left Hand Shown

1-3/8” Nickel
Bronze

1-3/8”

9/16” For ring handle 15/16”
model, order long
8774-PR nose 1-7/16”

23/32”

Right hand shown Also available in 1-3/8 and
1-1/2 inch hole centers

20176 Nickel Bronze 00190 Right hand shown
7/16”

Right Hand
Shown

1-3/8”

THRU-RAIL 1-1/2”
CAM

HANDLES

Nickel Bronze

15/32”

00242-L Lupton 00243-R Right Hand Shown 00414-R Lupton
1-3/8” 1-1/4”
Available in nickel bronze, red
bronze or dark statuary bronze

1/2” 7/16” Lug
Gap
1-1/2”

Specify Left or
Right Hand

Left hand shown 1-1/4” Available in red Available in Left or Right
00426-R center bronze, nickel Hand. Please specify
to bronze or dark
1-3/8” center statuary bronze
hole powder coated
spacing
00428-R 00495 Bayley
1/2” 1-3/8” 3/8”

7/16” Lug
Gap

1-1/2”

Right hand shown For 1-1/8” Lug Right Hand Configuration only
Specify Left or Right Hand Gap, order
428- L-Spec
or428- R-Spec

Right hand shown. Specify
Left or Right Hand

GP-32 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE I.G.W. CAM HANDLES
& SUPPLY

25.39.XX.103 as shown 25.41.XX.103 As shown 25.76.XX.102 as shown
25.39.XX.102 opposite 25.41.XX.102 Opposite 25.76.XX.103 opposite

1-3/8” Die Cast Left Hand Shown

1-3/8”

Available in 1”
nickel or
21/32” chestnut
bronze finish.

1” Available in 1-3/8”
Black, Chestnut
Bronze and
Brushed Copper
Nickel

00415 Right hand 04854 Nickel Bronze 04916 Cupples
shown 1-1/8" Ceco
Unavailable
Order #191w/ 1-1/2”
#192
See Page 27

Available in right 1/2”
hand only, as 1-1/2”
shown.

15/16”

11/16"

04972 Kawneer 05248 05335
1-3/8"
IGW Handle Available In Nickel
Bronze Or Red Bronze

1-3/8” Nickel Bronze 1-3/8"
Right Hand Shown
10-24 Tapped IGW Handle
Holes Right Hand Shown
Right Hand Shown
05396 Kawneer 7/8" 13/16"

Right Hand Only As Shown 08302 08365
1-7/16”
Nickel Bronze Nickel Bronze
3/4” Right Hand
Shown 1-3/8"
Nickel Bronze
1-3/8" 15/16"
Also available w/
special long nose. Right Hand Shown
Order For keeper,
8302-Spec-Long. order 8424
Specify Left or
Right Hand

1"

buyblaine.com GP-33

BLAINE SERVICE A.C. LOCKS / CAM
& SUPPLY HANDLES

09263 Medium Statuary 12551 Left Hand Shown 12625 Order 12560 3/32
Bronze Wrench

1/4” 10-24 Specify “A”
7/16” Locking 1/2”
Handle

1-7/16” Available in
nickel bronze
Order 2053-1/4 Wrench Available in nickel or red bronze
20313 bronze or red bronze
Avail: 1-3/8”, 1-7/16” & 1-1/2”
hole spacing

00184

PROJECT IN 1-3/4”
CAM
Used with 28 series
key operated HANDLES
Custodial Lock

7/16” Hopper Handle 04040 Red Bronze Red Bronze
00402 04149

1-3/8” 1-5/8”

1-9/16”

43/64”

Right Hand Red Bronze

swings to Comes with
wedge strike
Nickel or 1/2” right plate
Red Bronze Left Hand

swings to left

00497 Specify left or right hand 08036 Red Bronze

SIMPLEX 7/32” from back Truscon 1-3/8”
CAM of base to Republic Steel
underside of
HANDLES nose

19/32” 1-3/8” Available in 1/4”
nose red bronze or
reach nickel bronze

Right Hand Shown Right Hand Shown

08116 Simplex Handle 08761 Red Bronze 09441
1/8” 7/16” 1-3/8”
Right Hand Shown For wedge
1-1/4” Medium 3-hole strike, order Right Hand Shown
Statuary 8761-k
Bronze
1-1/4”
Custom 1/4”
Manufactured 1/4-20
threads on
nose 9/32”
Right hand
shown

GP-34 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE SPRING CATCHES / A.C.
& SUPPLY LOCKS

00144 Truscon 00147 Available in Nickel Bronze 00484 Fenestra
3/8”
Red Bronze and Red Bronze Die Cast
This 1-3/8” 1-3/8” 9/16”
model
also 1/2”
available 1-3/4”
for project
out For Surface Type Keeper, order Available in
applica- 00147-SK Aluminum or bronze
tion. painted finish
Order No. 04328
00144- 04332
Rev 3/8"

02404

7/16”

1-3/8”

1-1/8" 2-1/4"

Nickel Bronze Available in
nickel & dark
1-3/4” bronze

05131 Ceco 12401 Mason 00039-5/32”
1-3/8” 7/16” 5/32” Hex
*Available in 1-3/8", 1-7/16"
& 1-1/2".

1/2” Also
available
Available in nickel bronze or Available in nickel or red 5/8” with 1/8”
dark statuary bronze bronze hex. Order
08021 #00039-1/8”
01206 Nickel Bronze 01209 Available in red brass Ceco
and nickel bronze Order #02053-1/4”
Hex Wrench
3/8” 7/16”

1-1/2” 1-3/8”
tapped

1-3/8”

08043 Available in Nickel 08098 Ceco Available in nickel or red bronze
Ceco or Red Bronze
08454 1/2” lug gap - 08454-1/2

11/16” lug gap - 08454-11/16
Nickel Bronze

1-3/8”

7/16” 1-3/8” 7/16”
Order #2053-1/4 Hex Wrench
buyblaine.com 1-3/8”
For wrench handle,
order 0039-5/32

GP-35

BLAINE SERVICE SWEEP LATCHES
& SUPPLY
17.14.XX
17.02.XX.001 18.16.XX.102 12398.XX
Finger Lift Keeper

Restoration Lock 11/16” 9/16”
2-1/16” 3/8” 13/16”

2-11/16” 11/16” 7/8” 2-1/4” 2"
Bronze painted or white
2-1/16” hole 31/32” Screws not Keeper sold separately.
centers included. We
11/16” set back XX = recommend #6 13/16”
Bright Brass - 13 flat head 40073.XX
Antique Brass - 14 phillips and
Nickel - 19 determine your 7/16”
desired length.
We can provide.

2”

17.19.XX.200 17.23.XX.200 17.31.XX.100 Entrygard
Available in
7/16" Without 2-1/16" Bronze 11/16” bronze painted
Lugs painted, or white
With 2-1/16" 7/16” gold 40367.XX
Lugs painted, Keeper sold 1-7/8”
chestnut separately 2-11/16”
Beige, Bronze painted or bronze or
white white

40320.XX Keeper sold 40367.XX Keeper
2-1/16" separately. 2-1/16" sold
separately

27/64”

5/16" 5/32" 1/4"

17.33.XX.200 17.34.XX.200 17.35.XX.300
Available in beige, black, bronze Trimline With Lugs
painted, chestnut bronze, clay
or white 7/16” 11/16"

2-1/16” Available in 2-1/16"
beige or white. Bronze painted or white
11/16” 40380.XX
2-1/16” 5/16" 40380.XX5/16"
Keeper
Keeper no. 40891 sold 1/4” sold Keeper sold
separately separately separately
2-1/16"
1/4” 2-1/16"

17.38.XX.200 00501 01550-Set

Available in Brass Finished
gold painted, Cast Zinc
beige or
white

7/16” 1”

2-1/16” 1-7/8” 7/16”

40932 keeper, sold separately. 1-1/2"
2-1/8"

17/64" 1-7/8”
15/32" 2-7/16”
Several colors available

GP-36 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE SWEEP LATCHES
& SUPPLY
04216
04028 04210 Champagne

2-1/8” Black Finish 1-1/4”
1/2” Comes with 04216-k
keeper
1” 1-13/16”
Cast Zinc

04249 04254 04520 3/4” total height
Nickel Bronze Lock & Keeper
Nylon 9/16” 3/4”
1-1/4”
2” 11/16” 2-1/4”
Order 04249-K keeper
04550 2” Stone color Dark statuary bronze. For 2-5/16”
finish or hole centers. Order 04520-2-5/16.
2-3/4” 2-1/2” white Available in red bronze, nickel
2-1/4" 2 inch hole centers bronze and aluminum.
04583
Nickel 04591
Bronze Handed - Left Hand Shown

7/16” 1-3/8”

5/8” 1/2” 1-1/2”
1-3/4” Nickel Bronze

04583-K Keeper
Sold Separately

04594 Black, white, 04603 04623
natural zinc or Kawneer
brown
2-1/4"

11/16” 2-1/8” 1-1/4”
5/8” 1-1/4”
2-1/4”
17/64” 4623-K 5/8”

4594-K Keeper 15/16”
See keyed sold separately
version Order 4603-K Keeper separately
Order 4594-w/key Black or
white only

buyblaine.com GP-37

BLAINE SERVICE SWEEP LATCHES
& SUPPLY
04644 Overall height- 45/64”
04392 Available in 04627
black or white
diecast

3-3/32”
2-1/4”

7/32” 1-7/8”

1-1/2”

For keeper order Brass plated
04392-K die cast

04652 Thermalgard 04675-R NuPrime/ Seasonall For dull nickel finish
order 04644-016
Specify left or right Zinc Plated
R H Shown Die Cast 04703

Nickel Bronze

1-1/4” 7/16”

1-1/2” Keeper 04675-K 1-1/4"
sold 1-11/16"
separately Order 04703-k keeper separately
1-5/32”
White Right hand shown
Specify left or right hand
Comes with center 7/16” 7/16” A07538148WC White
screw
20667-Assy-003 Marvin 2-1/4”
04709 20667-Assy-067 1/4”

2-1/32”

1-5/8” 1-27/64” Pull 5/16”
out 2-1/4”
Right Hand Shown. Specify Solid polished brass lock
Left or Right Hand or white finish lever 1/4”
17.19
Order 04513-K Keeper 19/64”
A07538230BK Black
A8164-00-02 Black
A8164-00-WH White 17.23

7/16”

2-1/4” 2-1/16”

13/32” 2-1/16”

7/8”

with lugs

7/16”

GP-38 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE HORIZONTAL SLIDING LATCHES /
& SUPPLY ROLLERS & GUIDES

HS0001 HS0016 HS0050

1-1/16" Premiere 2-7/8” 2-1/4”
3"
Nylon with
aluminum
latch. Black
finish.

1/2”

2-1/8” hole
centers

HS0496 HS0710 HS0521
5/8”
Acorn
2-3/8”
2-1/4”
1-3/4”

1-41/64"

5/8" dia. metal
flat wheel

HS0561 HS0573 9/16” HS0577

5/16” 1/2” diameter Metal 9/16” 3/8” 5/16" dia. flat
9/16” 1/2” flat ball 9/16” dual metal
bearing wheel Reynolds wheels
3/4” 1-3/8"
1/4” 1-3/4”
7/16"
HS0585 29/32”
HS0588 5/16" dia. roller

HS0607

43/64” 1-27/32"
1-7/64"
1/2” diameter flat
nylon roller, 13/64” 1/2" dia. flat metal
wide white nylon wheel
housing

1-5/32”

7/8” diameter wheel. 37/64”
Specify Nylon or Steel

17.13 Truth RA0153 RA169

7/8" 1-13/64" 1-3/16”
Available 11/16"
In Gold,
Bronze, 1/4" RA0153-Small
Copper 1/2" 37/64"
&
White 1/2"
dia.
3/4" metal
wheel

buyblaine.com GP-39

BLAINE SERVICE CHANNEL BALANCES
& SUPPLY
Information required for CB 5 SERIES
CB 0 SERIES ordering: Channel Balance
Channel Balance 1. Measure channel length 9/16" channel width
9/16" channel width* (do not include plastic end
guides).
9/16" 2. Check numbers stamped 9/16"
Channel on channel. Channel
Width 3. Identify series. Width

Indicate CB 3 SERIES Indicate
Factory Channel Balance Factory
Numbers 9/16" channel width Numbers
or Letters or Letters
Stamped 9/16" CSCLSLhpehpeaenaenncgncgnitnfihteyfheyll Stamped
Channel
On Width On
Balance Balance
Indicate
Face Factory Face
Numbers
Specify 5/8" or Letters
Channel Channel Stamped
Length Depth
On
Balance 5/8"
Channel
Face Depth

Specify
Channel
Length

CB 4 SERIES
CHANNEL BALANCE

*For 3/8" channel width, 5/8"
order CB-4 Series Channel
Depth
Most Commonly Used
Accessories For CB 0 Series

Balances. Please
specify when ordering.

CB09003
Bottom
Guide

CB09006 Same as the CB5 series but
Top with a different gooseneck
clip.
Guide

GP-40 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE CHANNEL BALANCES &
& SUPPLY ACCESSORIES

CB9001-1 Capitol CB9002 Capitol

CB 2 SERIES White White
Channel Balance
9/16" channel width 5/8" 11/16" 1”

Non ribbed

9/16" 7/8" 1-3/64”
Channel
Width Top Guide Bottom

Indicate CB9003 Bottom CB9004 Bottom
Factory
Numbers White
or Letters
Stamped 1-3/32” 1-1/4”

Specify On 63/64” White 1-1/16”
Channel Balance Bottom
Length CB9005 CB9006
Face

White

15/16” 1/2”

5/8" 1” 1-1/4”
Channel Top Guide
Depth White

CB9007 Crossly CB9012 Sash Cam
5/8”
White Black or
15/16" 9/16” white

1-14”

1-1/4” 11/16”
Top Guide 57/64”

Comes with CB9062 guide, as CB9013 CB9018
shown above.

CB 6 SERIES Take
Channel Balance Out
Clip
Used in jambliners (ribbed)

Black or white

CB9020 Top CB9030 order CB9033
11/16” 57/64”
White .160 dia. hole
63/64” Hole Center -
9/16” from
bottom

1-7/16” 1-27/64”
White
5/8”

buyblaine.com GP-41

BLAINE SERVICE CHANNEL BALANCE
& SUPPLY ACCESSORIES

CB9032 7/8” White CB9033 CB9065

11/16” White 5/8" 27/32"
11/16"

1-9/16”

1-15/32"

5/8” Black or white
1" 1"
CB9067 Black or CB9071 Top Guide CB9083

white 3/4”

9/16” White

White
2" 1-3/8”

3/16"

CB9087 3/4" CB9096 15/32” CB9119
1" 1-1/16"
white 7/8”
1" nylon 7/8”

2" 3/4" 2-1/4”
3/4" 1-1/16"
3/4" Black or Handed
white Black or white L/R Pair
CB9248
CB9252-Spec CB9256

2” White 1-3/16”
7/8”

3/4” 3/4”
white or black 1-1/2”

CB9266 CB9268-A Top CB9268-B Bottom
Capitol
3/4” Capitol Black or white

1-5/16”

1-13/16”

1-5/8” 7/8” 7/8” 9/16”
Black or white Original is clear plastic
Black or white
CB9274
CB9270-L/R Pair CB9276 Howard
White 5/8”
1-5/16” 5/16”

Black

1/2”
1-1/4”

1-7/16” 1/2”

For zinc cam, order CB9270-1 Metal
For nylon pawl (brake), order CB9270-2

GP-42 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE TUBE BALANCES
& SUPPLY
WB79-AT Series Tube Balance
WB7900 Series Tube Balance
Specify Tube Length & Bearing
Specify Tube Length & Bearing Color When Ordering
Color When Ordering
Actual Diameter 9/16". Referred
Actual Diameter 9/16". Referred to as 5/8" in Trade.
to as 5/8" in Trade.
Specify
SASH WEIGHT Tube
Length
Orange/Red- Sash load to 25 Lbs
Blue- Sash load to 35 Lbs
Black- Sash load for 36 - 40 lbs

Specify Aluminum Order WB0618 Aluminum
Tube Tube Tension Tool Tube
Length

Bearing WB0014 Bearing
Most commonly Rod
Cross Pin used accessory
Rod WB01047
with WB7900
Series Balance WL0001
Tilt Latch
For
Double / Single Hung, Non-Tilt / WB77-IT Series Tube Balance
Non-Take Out Style Windows
Specify Tube Length & Bearing
WB7700 Series Tube Balance Color When Ordering

Specify Tube Length & Bearing 3/8" Diameter
Color When Ordering

3/8" Diameter

SPECIFY BEARING COLOR

White - Standard
Orange/Red- Medium
Green -
Heavy

Specify Order WB618 Specify Aluminum
Tube Tension Tool Tube Tube
Length Length Order WB0618-AT
Double Prong
Aluminum Tension Tool
Tube

Bearing WB0010 Bearing WB01042
Rod Most commonly Rod Most commonly
Cross used accessory used accessory with
Pin WB77-IT Series
with WB7700
Series Balance Balance

For Tilt Windows GP-43

buyblaine.com

BLAINE SERVICE TUBE BALANCES &
& SUPPLY ACCESSORIES

WB79-TO Series Tube Balance WB0002-L/R WB0004 white

Specify Tube Length & Bearing white
Color When Ordering
1/8" 1-3/8"
Actual Diameter 9/16". Referred
to as 5/8" in Trade.

Three Rod Extensions 1/43"/8" 7/8"

S - 1-5/8" For version with
R - 2-5/8" wire loop, order
RR - 3-5/8" WB0004-Spec

Specify SASH WEIGHT WB0010 Metal WB0014
Tube
Length Orange / Red - Medium Metal
Blue - Heavy 1-1/4"

1/2"

Aluminum
Tube

Bearing Order WB0618 1-11/16" 5/16"
Rod Tension Tool
WB0018 Metal WB0411 replacement
5/8" may differ
Rod 2-7/8" 3/8" slightly from
Exten- original
sion

Metal 2-13/16"

Specify Rod Extension WB0213 3/8" 1-1/2"
when ordering Please specify if
required at time of

order

WB77-TO Series Tube Balance WB0436 w/ rivet L/R Pair

Specify Tube Length & Bearing UNIQUE white WB0500
Color When Ordering

1-7/64”

3/8" Diameter SPECIFY BEARING COLOR 1-1/2"

White - Standard Metal 1-9/16”
Orange/Red - Medium 3/4” 3/8”
Green -
Heavy

7/16"

WB0616 Black or WB0618

white

11/16"

Aluminum Order WB0618
Tube Tension Tool

1/2" 5/8"

Bearing WB0202 WB0627 WB-618-AT
Rod Most commonly WB0650
1/2" used accessory 7/16"
with WB7700-TO 1/4”
Series Balance 3/4" 5/8"

Please specify if 3/8”
required at time of
2-3/4”
order Die Cast

Black or white

GP-44 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE TUBE BALANCES / JAMB STRETCHER
& SUPPLY

WB8100 ULTRA-LIFT BALANCE WB7000 SERIES
(Special Order)
5/8” PLASTIC TUBE BALANCE
Makes 80-Lb Sash Easy To Lift !
Tube diameter 9/16” but considered 5/8” in
30-80 lbs per pair capacity Available 20-1/2" - 60-1/ the trade
2"

5/16" Rod Length
Tube Length (1/2”
Maximum Tube
Extended Length Increments)
Length:
2 X Tube length Guide 9/16”
Minus 1-1/2"
Black Tube
41/64" Standard
Dia. Gray Available

Please 2"
specify
sash
weight

Ultra-Lift Balance WB6000 SERIES
Travel Characteristics
3/8” TUBE BALANCE
Non-Tilt Bracket
Rod Length
WB8100-1 Tube Length (1/2”

Increments)

Bearing / Pawl 3/8”

•Lifts 70% of sash weight vs AAMA's 40% minimum. Call for information on
•Useable with both tilt and non-tilt windows. available lengths, special
•Fits most C-20 and HC-40 AAMA-Grade single and lengths and accessories.

double hung windows.

•Fits most large architectural wood windows.

Call Customer Service for more details

The JAMB STRETCHER enables you to spread a vinyl jamb pocket in order to replace balances, shoes or
other components without the need to cut into the jamb or melting the vinyl with a hot air gun.

Replace components in a fraction of the time compared to other methods. This is an
excellent tool for factory use or field repair!
Designed for use in vinyl jambs only!

3 Easy Steps

1. Position one spreader below 2. Turn knobs clockwise by 3. Remove / replace
and one spreader above the item hand or with a hex bit drill components
needing removal. gun to spread jamb.
GP-45
Part No. WB1449

buyblaine.com

BLAINE SERVICE ULTRA LIFT BALANCE
& SUPPLY

ULTRA-LIFT Rnt

A HYBRID BALANCE SYSTEM FOR
HEAVY SASH 50 - 100 LBS

HIGH LIFT ASSISTANCE
MAKES HEAVY SASH EASY TO OPERATE

.670 TUBE DIAMETER
FITS MOST COMMON BALANCE POCKETS

BOOSTED FORCE CURVE
HELPS INITIATE OPENING OF SASH

CLASS 5 RATING
BALANCE LIFTS 70% OF SASH WEIGHT

LOW CARBON COATED STEET ROD
RUST RESISTANT WITH LOW FRICTION PROPERTIES

WHITE OR GRAY PVC TUBE COVER
PROVIDES CONTAMINANT PROTECTION
TUBE BLENDS INTO WINDOW COLOR

STANDARD ROD END CONFIGURATION
COMPATIBLE WITH A WIDE RANGE OF WINDOW DESIGNS

CUSTOM BUILT AND IDENTIFIED
MAXIMUM PERFORMANCE WITH EASY INSTALLATION

ULTRA-LIFTRnt WEIGHT CAPACITY CHART

HOW TO ORDER:

GP-46 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE MEGA LIFT BALANCE
& SUPPLY

MEGA-LIFT TM

A HYBRID BALANCE SYSTEM FOR
HEAVY SASH FROM 100 - 130 LBS

COMBINE BEST QUALITIES OF TORSION AND ESTENSION
SPRINGS
PROVIDES EXCEPTIONAL OPERATING CHARACTERISTICS

TUBE DIAMETER OF .575
FITS MOST SIDELOAD HC/AW DESIGNS

BOOSTED FORCE CURVE
HELPS INITIATE OPENING OF SASH

CUSTOM BUILT FOR SPECIFIC APPLICATION
DELIVERS OPTIMAL OPERATING FORCE

HIGH LIFT ASSISTANCE
ALLOWS THE HEAVIEST SASH TO OPERATE EASILY

CLASS 5 RATING
BALANCE LIFTS 70% OF SASH WEIGHT

WHITE OR GRAY PVC TUBE COVER
PROVIDES CONTAMINANT PROTECTION
TUBE BLENDS INTO WINDOW COLOR

WEIGHT RANGES: 100 - 130 LBS
LENGTHS: 30 - 60 INCHES
AAMA 902-07 CLASS 5
VERIFIED COMPONENT

MEGA-LIFT WEIGHT CAPACITY CHART

HOW TO ORDER: GP-47

buyblaine.com

BLAINE SERVICE TUBE BALANCE
& SUPPLY ACCESSORIES

WB0651 1-5/8" WB0652 1-17/64" WB0653 1-17/64"

2-1/32" 2-1/16" 2"

39/64" Black 35/64" Tan Cam Red
Cam Cam
WB0657 WB0658-L/R Anti draft block
Plunger 5/8" WB1042 15/16" Used with
White 1-3/16" WB77-IT
Nylon 11/16" Series

2-3/4" 1-25/32"

WB1047 1-9/32" 15/16” Black or white 11/32" White
2" Metal Cam
Used with WB1062 WB1064
WB79-AT For Crestline
Series
Assy.
17/32" Blue 30" spring, includes
Cam order
WB1067 WB7500- (1) of
Spring-30 each
& cut to piece
size shown

Metal

WB1073 3 pc. foot assembly WB1083-L/R-Upper
15/16"
9/16” 1" Black only

Replaces Thermal-Gard 1-1/8" 1-11/16"
white
5/8"
5/8”
1-13/16"

2-1/32” 1-1/4” 1/2"

Cast zinc replacement WB-1083-L/R-Lower

WB1111 WB1122 L/R Pair WB1299 Metal
L/R Pair
9/16”
1-3/16” 1-1/16”
1”

2” 5/16” 5/16” 3/4”
1-5/8” 3/8" Metal

with cast zinc cam Cast Zinc 2-1/8
Cast Zinc
WB1317 Cast Zinc WB1315 WB8100-1
5/32”

1-3/8” 1/4”
1/4”
9/16”
1-3/8”
1” 1-3/8” 5/8”
3-3/16” 3-13/16”

Non tilt bracket for
WB8100 Ultra lift

GP-48 Phone: (708) 343-8800 Fax: (855) 898-6471

BLAINE SERVICE JAMBLINERS
& SUPPLY

WB7500 SERIES Window Glass
REPLACEMENT ALUMINUM WINDOW CHANNELS Height Height

For Wood Double Hung Window Part Number 2'2" 10"
With 1-3/8" Sash WB-7501 2'6" 12"
WB-7502 2'10" 14"
Replace old style tubular balances or rope and pulley. WB-7503 3'2" 16"
Designed for 1-3/8" sash. One piece jamb strip WB-7504 3'6" 18"
reduces air infiltration. Baked-on white enamel finish, WB-7505 3'10" 20"
metal "T" hangers and flocked springs. Use (1) pair to WB-7506 4'2" 22"
repair (1) double hung window. See chart at right. WB-7507 4'6" 24"
WB-7508 4'10" 26"
TO ORDER: WB-7509 5'2" 28"
Measure overall window height of window opening and / WB-7510 5'6" 30"
or glass height of sash only. Select from chart at right. WB-7511 5'10" 32"
WB-7512 6'2" 34"
Absolute maximum Replacement Metal "T" WB-7513 6'6" 36"
sash weight: 26 lbs. Hanger, included with WB-7514 6'10" 38"
jambliner WB-7515 7'2" 40"
WB-7516
WB7517
Caution: Our jambliners are cut
14 degrees on sill end.

WB7300 Series Tilt Liner was developed to provide a Glass Opening
durable, trouble-free removable weatherstrip balance Part Number Height Height
for single glazed windows.
The Liner WB-7300 12" 2'6"
Rigid PVC with flex-leaf open construction. WB-7301 14" 2'10"
The sash is held in place solidly yet the 1-3/8" WB-7302 16" 3'2"
individual leafs will move out of the way to Sash 18" 3'6"
allow for tilting. Springs are concealed and Beige WB-7303
protected. Spring noise is eliminated with WB-7304 20" 3'10"
a sound deadener attached to each spring. or WB-7305 22" 4'2"
White
Backing Foam
Advanced foam with a closed cell edge is WB-7306 24" 4'6"
standard. The foam acts as a compression WB-7307 26" 4'10"
spring with the closed cell edge providing a WB-7308 28" 5'2"
superior air and 30" 5'6"
water seal. WB-7309
WB-7310 32" 5'10"
Note: Our jambliners are cut at WB-7311 34" 6'2"
approximately a 14 degree angle. WB-7312 36" 6'6"

The Carrier System
Simple and durable. Large one piece carriers
provide easy sash installation and insure proper
balancing with self-adjusting friction. Large
mushroom sash pins capture the carriers to
eliminate carrier fly-up.

WB7200 & WB7200-A VINYL JAMBLINERS FOR INSULATED GLASS

WB7200 SERIES* 1-3/8" Sash 1-1/4" Sash Glass Opening
Non-Tilt WB7204-058 WB7204-A-058 Height Height
WB7205-058 WB7205-A-058
FOR INSULATED GLASS WITH 1-3/8" WB7206-058 WB7206-A-058 18" 3'6"
OR 1-1/4" SASH WB7207-058 WB7207-A-058 20" 3'10"
Beige WB7208-058 WB7208-A-058 22" 4'2"
WB7209-058 WB7209-A-058 24" 4'6"
Repair and upgrade old windows with an WB7210-058 WB7210-A-058 26" 4'10"
energy efficient vinyl or metal jambliner. WB7211-058 WB7211-A-058 28" 5'2"
These jambliners replace old tubular WB7212-058 WB7212-A-058 30" 5'6"
style balances or rope and pulley WB7213-058 WB7213-A-058 32" 5'10"
systems. 34" 6'2"
Other Sizes Available 36" 6'6"

Standard 14 degree miter cut

•Rigid Vinyl Weatherstrip •Speed Lok Stops Maximum sash WB7200 Series-Non Tilt
•Continuous Tube Cover •Sound Deadener weight: 26 lbs. Insulating Glass
•Friction Platform •Dust And Air Plug

buyblaine.com GP-49

BLAINE SERVICE TAPE BALANCES /
& SUPPLY
ANDERSEN PERMASHIELD
FT Style
CALDWELL

AT Style S Style

Weight Type Weight Type Weight Type
(lbs) 150 / 154 / 242 (lbs) 150 / 154 / 242 (lbs) 150 / 154 / 242

Weight factor based on one (1) pair Acme - Duplex Tape Balances also

HOW TO ORDER: available. Please inquire.

1. Identify style by above drawings: FT, AT or S. 3. Identify weight (weight number will be

2. Identify type (type number will be stamped on the face plate). stamped on the face plate).

In some cases, you may need to 4. Measure tape travel (length) for new or
scrape off paint or dirt to locate the type number.
replacement tape balance.

Other Caldwell sash balances, not Face Plate Length
described on this page, have been
developed for specific purposes, special FT Style AT Style S Style 6"
windows or other devices and can be 150-FT 5-1/8" 150-AT 4-11/16" 150-S 7"
special ordered. Please send samples, or 154-FT 5-13/16" 154-AT 5-15/32" 154-S 5-5/8"
details, to our Customer Service 242-FT 4-11/16" 242-AT 4-5/16" 242-S
Department.

Side Style Overhead Face Plate Length
Style
Side Style Overhead Style
Weight Type Weight F 4-3/8" F 3-3/8"
(lbs) A 6" A 4-11/16"
L 7-7/16" L 5-7/8"
M 8-3/4" M 7-1/4"

Type 102F / 103A / Etc... (lbs) Weight factor based on one (1) pair
2F / 3A / Etc...

HOW TO ORDER: 3. Identify weight (weight number
1. Identify style by above drawings: Side Style or Overhead Style. will be stamped on the face plate).
4. Measure tape travel (length) for
2. Identify type (type number will be stamped on the face plate). new or replacement tape balance.
In some cases, you may need to scrape off paint or dirt to lo-

cate the type number.

PART NO. 07489

GP-50 Phone: (708) 343-8800 Fax: (855) 898-6471