BLACOH CAPABILITIES GUIDE

“Don’t Pump

BLACOH CAPAB

SENTRY SENTINEL S

800.603.7867 951.342.3100 www

Version 2.3

p Without Us”

BILITIES GUIDE

SPILLSTOP SERVICES

w.BLACOH.com [email protected]

Table Of Contents

CLASS NOMINAL VOLUME: in3 (liters)* MOD

4 in3 4 (0.06) SENTR
10 in3 10 (0.16) SENTR
8, 12, 24 in3 8, 12, 24 (0.13, 0.20, 0.39) SENTR
12 in3 12 (0.20) SENTR
36 in3 36 (0.59) SENTR
85 in3 85 (1.40) SENTR
175 in3 175 (2.87) SENTR
370 in3 370 (6.06) SENTR
275 in3 275 (4.50) CIP
577 in3 577 (9.46) SENTR

5 gallon 1155 (18.9) SENTR

10 gallon 2310 (37.9) SENTR

* Nominal volume may vary depending on configuration.

ADDITIONAL RESOURCES

AODDampener

SENTINEL Gauge Guards/Diaphragm Seals

SPILLSTOP Leak Containment

Supporting Products– Pressure Relief Valves, Back Pressure Valves, Check & Pop

Air Control Types

Bladders & Bellows

Bladder Temperature Limits

Testing & Certifications

Performance Charts

Website Resources

Blacoh University

Conversions & Sizing

800.603.7867 951.342.3100 www.

s PAGE

DEL SERIES 4
5
RY III 6
RY III 7
RY XPA, XPX, XPH 8
RY Tef-Guard 9
RY II 10
RY II 11
RY I 12
RY I 13
RY 2” AL 14
RY IV 15
RY V
16
ppet Valves, Calibration Columns, Charging Kits 17
18
.BLACOH.com [email protected] 19
20
21
22
23-24
25-26
27
28
29

2

PUMPING SYSTEM DIAGRAM

SPILLSTOP™ LEAK SENTRY™ INLET
CONTAINMENT STABILIZER

Stops spills caused by pump Extends life of all inlet
diaphragm failure system components

SENTINEL™ SENTRY™ PUL
DIAPHRAGM SEALS DAMPENER

Protect & isolate system Removes up to
instrumentation system shock

POSITIVE
DISPLACEMENT

PUMP

TANK

800.603.7867 951.342.3100 www.

SENTINEL™ PRESSURE SENTRY™ SURGE
RELIEF VALVES SUPPRESSOR

Protect system from Eliminates hydraulic surge
over-pressure damage & water hammer

LSATION SENTINEL™ BACK
PRESSURE VALVES
99% of
Apply continuous back
pressure to the pump

DISCHARGE QUICK
CLOSE
.BLACOH.com [email protected] VALVE

3

4 in3 (0.06 L)

SENTRY III

Series Body Material Bladder Inlet Size
Material Material

Plastic CPVC Aflas 0.375" to 0.5"
Metal Polypropylene (PP) Buna-N (10 to 15 mm)
Buna-N (FoodGrade)
PTFE EPDM 0.375" to 0.75"
PVC Hypalon (10 to 20 mm)
PVDF Neoprene

Alloy 20 (A20) PTFE
Hastelloy C (HAST) Santoprene
Stainless Steel (SS) Silicone (FoodGrade)
Stainless Steel - 30 RA Polished
Viton
(SSP)

Plastic Series Wetted / Non- Wetted Metal Series W

04PP PP / PP 1120
04PVC PVC / PVC 1170
CPVC / CPVC 1175
04X PVDF / PVDF 1185
10K PTFE / PTFE 7325
T1010 PTFE / PTFE 8325
T1050

800.603.7867 951.342.3100 www.

Inlet Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

FNPT 150 psi Adjustable 2 to 4 lbs ATEX
BSP (10.3 bar) Chargeable (0.91 to 1.81 kg) ISO 9001:2008
ANSI Flange
DN Flange 1000 psi 4 to 6 lbs NAFTA
Socket Weld (68.9 bar) (1.81 to 2.72 kg) CRN
Tri-Clamp PED
Union Fitting ARRA

3.1 Cert.
Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

Wetted / Non- Wetted Accessories

SS / SS Charging Kits
A20 / A20 Bladder Replacement Kits
A20 / SS Hardware Replacement Kits
HAST / SS
Pressure Relief Valves
SS / SS Back Pressure Valves
SSP/ SSP
Gauge Guards
Gauge Upgrades
Spill Containment for AODD

.BLACOH.com [email protected] 4

10 in3 (0.16 L)

SENTRY III

Series Body Material Bladder Inlet Size
Material Material

Plastic Acetal Aflas 0.375" to 0.5"
Metal Acetal - Conductive Buna-N (10 to 15 mm)
Buna-N (Food Grade)
CPVC EPDM 0.375" to 0.75"
Polypropylene (PP) Hypalon (10 to 20 mm)
Neoprene
PTFE
PVC PTFE
PVDF Santoprene
Silicone (Food Grade)
Alloy 20 (A20)
Hastelloy C (HAST) Viton
Stainless Steel (SS)
Stainless Steel - 30 RA Polished

(SSP)

Plastic Series Wetted / Non- Wetted Metal Series W

10PP PP / PP 1020
10PVC PVC / PVC 1070
CPVC / CPVC 1075
10X Acetal-Cond / Acetal-Cond 1080
DC1005 PVDF / PVDF 1085
PTFE / PTFE 7320
10K PTFE / PTFE 8320
T1000
T1012

800.603.7867 951.342.3100 www.

Inlet Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

FNPT 150 psi Adjustable 6 to 10 lbs ATEX
BSP (10.3 bar) Chargeable (2.72 to 4.54 kg) ISO 9001:2008
ANSI Flange Inlet Stabilizer
DN Flange 1000 psi 14 to 18 lbs NAFTA
Socket Weld (68.9 bar) (6.35 to 8.16 kg) CRN
Tri-Clamp PED
Union Fitting ARRA

3.1 Cert.
Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

Wetted / Non- Wetted Accessories

SS / SS Charging Kits
A20 / A20 Bladder Replacement Kits
A20 / SS Hardware Replacement Kits
HAST / HAST
HAST / SS Pressure Relief Valves
Back Pressure Valves
SS / SS
SSP / SSP Gauge Guards
Gauge Upgrades
Spill Containment for AODD

.BLACOH.com [email protected] 5

8, 12, 24 in3 (0.13, 0.20, 0.39 L)

SENTRY XPA, XPX

Series Body Material Bladder Inlet Size Inle
Material Material

XPA/XPX Au

Buna-N AN
DN
Stainless Steel (SS) EPDM 0.5" RT
(15 mm) Soc

XPH Duplex Stainless Steel (DSS) PTFE
Viton

H
T

Series Size Wetted / Non-Wetted
XPA_-08 / XPH_-08 8 in3 / 0.13 L SS / SS
12 in3 / 0.20 L SS / SS
XPX10-12 12 in3 / 0.20 L SS / SS
XPA_-12 / XPH_-12 24 in3 / 0.39 L SS / SS
XPA_-24 / XPH_-24

800.603.7867 951.342.3100 www.

PX, XPH

et Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

utoclave XPA: 7500 psi Chargeable XPA: 10-13 lbs ATEX
FNPT (517.1 bar) Gauge Adaptor (4.54 to 6.90 kg) ISO 9001:2008
BSP
NSI Flange XPX: 15000 psi XPX: 44 lbs NAFTA
N Flange (1034.2 bar) (20.0 kg) CRN
TJ Flange PED
cket Weld XPH: 7500 psi XPH: 10-13 lbs ARRA
(517.1 bar) (4.54 to 6.90 kg)
HP Flow- 3.1 Cert.
Through Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

Accessories About

Charging Kits The XPH model’s unique design allows it to
Bladder Replacement Kits effectively remove both hydraulic pulses and
Hardware Replacement Kits acoustic pulses. The flow-through inlet is spe-
cifically designed to remove high frequency
Pressure Relief Valves pulses greater than 15 Hz. Residual pulsations
Back Pressure Valves of less than 1% can be achieved with the flow-
through design versus a single inlet/outlet
Gauge Guards dampener. (See performance chart on p. 24)
Gauge Upgrades
Spill Containment for AODD

.BLACOH.com [email protected] 6

12 in3 (0.20 L)

SENTRY Tef-Guar

Series Body Material Bladder Inlet Size I
Material Material

Metal

Stainless Steel (SS) PTFE 0.5”
(15 mm)

S

Metal Series Wetted / Non- Wetted Acce
TG12SS SS / SS
Charg
Bladder Rep
Hardware Re

Pressure R
Back Pres

Gauge
Gauge
Spill Contain

800.603.7867 951.342.3100 www.

rd

Inlet Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

FNPT 2,000 psi Chargeable 12 lbs ATEX
BSP (137.8 bar) (5.44 kg) ISO 9001:2008
ANSI Flange
DN Flange NAFTA
Socket Weld PED
ARRA

3.1 Cert.
Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

essories

ging Kits
placement Kits
eplacement Kits
Relief Valves
ssure Valves
e Guards
Upgrades
nment for AODD

.BLACOH.com [email protected] 7

36 in3 (0.59 L)

SENTRY II

Series Body Material Bladder Inlet Size
Material Material

Plastic Acetal Aflas 0.5" to 1"
Metal CPVC Buna-N (15 to 25 mm)
Polypropylene (PP) Buna-N (FoodGrade)
PTFE EPDM 0.75" to 1.5"
PVC Hypalon (20 to 40 mm)
PVDF Neoprene

Alloy 20 (A20) PTFE
Carbon Steel (CS) Santoprene
Hastelloy C (HAST) Silicone (FoodGrade)
Stainless Steel (SS)
Stainless Steel - 30 RA Polished Viton

(SSP)

Plastic Series Wetted / Non- Wetted Metal Series W

601 PTFE / PTFE 3120
1301 PP / PP 3124
1305 PP / PP 3140
1311 3174
1315 PVC / PVC 3175
1341 PVC / PVC 3185
1401 CPVC / PVC 7225
1801 PVDF / PP 8225
Acetal / PP

800.603.7867 951.342.3100 www.

Inlet Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

FNPT 150 psi Adjustable 6 to 10 lbs ATEX
BSP (10.3 bar) Automatic (2.72 to 4.54 kg) ISO 9001:2008
ANSI Flange Chargeable
DN Flange 1000 psi 14 to 18 lbs NAFTA
Socket Weld (68.9 bar) (6.35 to 8.16 kg) CRN
Tri-Clamp PED
Union FItting ARRA

3.1 Cert.
Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

Wetted / Non- Wetted Accessories

SS / SS Charging Kits
SS / CS Bladder Replacement Kits
CS / CS Hardware Replacement Kits
A20 / CS
A20 / SS Pressure Relief Valves
HAST / SS Back Pressure Valves
SS / SS
SSP / SSP Gauge Guards
Gauge Upgrades
Spill Containment for AODD

.BLACOH.com [email protected] 8

85 in3 (1.40 L)

SENTRY II

Series Body Material Bladder Inlet Size
Material Material

Plastic Acetal Aflas 0.5" to 1"
CPVC Buna-N (15 to 25 mm)
Metal Polypropylene (PP) Buna-N (FoodGrade)
Polypropylene - Conductive EPDM 0.75" to 1.5"
PTFE Hypalon (20 to 40 mm)
PVC Neoprene
PVDF (to 250 psi)
PTFE
Alloy 20 (A20) Santoprene
Carbon Steel (CS) Silicone (FoodGrade)
Hastelloy C (HAST)
Stainless Steel (SS) Viton
Stainless Steel - 30 RA Polished

(SSP)

Plastic Series Wetted / Non- Wetted Metal Series W

301 PP / PP 3020
305 PP / PP 3024
311 PVC / PVC 3040
321 PP- Cond / PP- Cond 3075
331 CPVC / CPVC 3085
401 PVDF / PP 7220
421 PVDF / PVDF 8220
651 PTFE / PTFE
661 PTFE / PTFE
801 Acetal / PP

800.603.7867 951.342.3100 www.

Inlet Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

FNPT 250 psi Adjustable 7 to 9 lbs ATEX
BSP (17.2 bar) Automatic (3.18 to 4.08 kg) ISO 9001:2008
ANSI Flange Chargeable
DN Flange 1000 psi Inlet Stabilizer 15 to 19 lbs NAFTA
Socket Weld (68.9 bar) (6.80 to 8.62 kg) CRN
Tri-Clamp PED
Union Fitting ARRA

3.1 Cert.
Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

Wetted / Non- Wetted Accessories

SS / SS Charging Kits
SS / CS Bladder Replacement Kits
CS / CS Hardware Replacement Kits
A20 / SS
HAST / SS Pressure Relief Valves
SS / SS Back Pressure Valves
SSP / SSP
Gauge Guards
Gauge Upgrades
Spill Containment for AODD

.BLACOH.com [email protected] 9

175 in3 (2.87 L)

SENTRY I

Series Body Material Bladder Inlet Size
Material Material

Plastic Noryl (non-wetted only) Aflas 1.5" to 2"
Metal Polypropylene (PP) Buna-N (40 to 50 mm)
PTFE EPDM
PVC Hypalon 1.5" to 2.5"
PVDF Neoprene (40 to 70 mm)

Alloy 20 (A20) PTFE
Carbon Steel (CS) Santoprene
Hastelloy C (HAST) Silicone (FoodGrade)
Stainless Steel (SS)
Stainless Steel - 30 RA Polished Viton

(SSP)

Plastic Series Wetted / Non- Wetted Metal Series W

501 PTFE / PTFE 2175
901 PP / Noryl 2185
905 PP / Noryl 2500
911 PVC / Noryl 2520
915 PVC / Noryl 2700
1201 PVDF / Noryl 2720
1221 PVDF / PVDF 7125
8125

800.603.7867 951.342.3100 www.

Inlet Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

FNPT 150 psi Adjustable 18 to 22 lbs ATEX
BSP (10.3 bar) Automatic (8.16 to 9.98 kg) ISO 9001:2008
ANSI Flange Chargeable
DN Flange 1000 psi 34 to 37 lbs NAFTA
Socket Weld (68.9 bar) (15.42 to 16.78 kg) CRN
Tri-Clamp PED
Union Fitting ARRA

3.1 Cert.
Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

Wetted / Non- Wetted Accessories

A20 / SS Charging Kits
HAST / SS Bladder Replacement Kits
SS / Noryl Hardware Replacement Kits

SS / SS Pressure Relief Valves
CS / Noryl Back Pressure Valves

CS / CS Gauge Guards
SS / SS Gauge Upgrades
SSP / SSP Spill Containment for AODD

.BLACOH.com [email protected] 10

370 in3 (6.06 L)

SENTRY I

Series Body Material Bladder Inlet Size
Material Material

Plastic Polypropylene (PP) Aflas 1.5" to 2"
Metal PTFE Buna-N (40 to 50 mm)
PVC EPDM
PVDF Hypalon 2" to 2.5"
Neoprene (50 to 70 mm)
Alloy 20 (A20)
Carbon Steel (CS) PTFE
Hastelloy C (HAST) Santoprene
Stainless Steel (SS) Silicone (FoodGrade)
Stainless Steel - 30 RA Polished
Viton
(SSP)

Plastic Series Wetted / Non- Wetted Metal Series W

101 PP / PP 2075
105 PP / PP 2085
111 PVC / PVC 2400
115 PVC / PVC 2420
201 PVDF / PP 2425
221 PVDF / PVDF 2600
551 PTFE / PTFE 2620
7120
8121

800.603.7867 951.342.3100 www.

Inlet Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

FNPT 200 psi 24 to 27 lbs ATEX
BSP (13.7 bar) (10.80 to 12.25 kg) ISO 9001:2008
ANSI Flange
DN Flange 1000 psi Adjustable NAFTA
Socket Weld (68.9 bar) Automatic CRN
Tri-Clamp Chargeable PED
Union Fitting Inlet Stabilizer ARRA

42 to 50 lbs 3.1 Cert.
(19.05 to 22.68 kg) Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

Wetted / Non- Wetted Accessories

A20 / SS Charging Kits
HAST / SS Bladder Replacement Kits
Hardware Replacement Kits
SS / PP
SS / SS Pressure Relief Valves
SS / CS Back Pressure Valves
CS / PP
CS / CS Gauge Guards
SS / SS Gauge Upgrades
SSP / SSP Spill Containment for AODD

.BLACOH.com [email protected] 11

275 in3 (4.50 L)

CIP

Series Body Material Bladder Inlet Size
Material Material

Metal

Stainless Steel – 30 RA EPDM (Food Grade) 2.5"
(70 mm)
Polished (SSP) Silicone (Pharma Grade)

Metal Series Non- Wetted Accessorie
275 SSP
Charging K
Bladder Replacem
Hardware Replace

Pressure Relief
Back Pressure

Gauge Gua
Gauge Upgra
Spill Containment

800.603.7867 951.342.3100 www.

Inlet Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

Tri-Clamp 150 psi Adjustable 8 to 10 lbs ATEX
(10.3 bar) Chargeable (3.63 to 4.54 kg) ISO 9001:2008

NAFTA
PED
ARRA

3.1 Cert.
Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

es

Kits
ment Kits
ement Kits
f Valves
Valves
ards
ades
for AODD

.BLACOH.com [email protected] 12

577 in3 (9.46 L)

SENTRY 2” AL

Series Body Material Bladder Inlet Size Inle
Material Material

Metal

Aluminum (AL) Buna-N 2" ANS
EPDM (50 mm) DN
Neoprene
Viton

Metal Series Non- Wetted Accessorie
577 AL / AL
Charging K
Bladder Replacem
Hardware Replace

Pressure Relief
Back Pressure V

Gauge Guar
Gauge Upgra
Spill Containment

800.603.7867 951.342.3100 www.

et Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

FNPT 150 psi Adjustable 32 to 38 lbs ATEX
BSP (10.3 bar) Automatic (14.51 to 17.24 kg) ISO 9001:2008
SI Flange Chargeable
N Flange Inlet Stabilizer NAFTA
PED
ARRA

3.1 Cert.
Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

es

Kits
ment Kits
ement Kits
Valves
Valves
rds
ades
for AODD

.BLACOH.com [email protected] 13

1155 in3 (18.9 L; 5 gallon)

SENTRY IV

Series Body Material Bladder Inlet Size
Material Material

Plastic Polypropylene (PP) 3"
(80 mm)
Metal Aluminum (AL) Buna-N
Alloy 20 (A20) EPDM 3" to 6"
Epoxy Coated Aluminum (ECAL) Hypalon (80 to 150
Carbon Steel (CS) Neoprene
Epoxy Coated Carbon Steel (ECCS) PTFE mm)
Hastelloy C (HAST) Silicone (Food Grade)
Stainless Steel (SS) Viton
Stainless Steel - 30 RA Polished (SSP)
Duplex Stainless Steel (DSS)

Plastic Series Wetted / Non- Wetted Metal Series W
P4000 PP / PP
4000
4015
4020
4030
4040
4045
4046
4050
4060
4065
4070
4075
4080
4085
7420
8420

800.603.7867 951.342.3100 www.

Inlet Type Max Air Control Est. Shipping Certifications
& Testing
Pressure Type Weight

ATEX

ISO 9001:2008

90 psi 33 to 36 lbs NAFTA
(6.2 bar) (14.97 to 16.33 PED
ARRA
kg)

ANSI Flange Adjustable 3.1 Cert.
DN Flange Automatic Material Cert.
Hammer Union Chargeable Cert. of Origin
Tri-Clamp Inlet Stabilizer Hydrostatic Testing
Dye Penetrant Test
NPTF 72 to 82 lbs X-Ray/Radiography
(32.66 to 37.19 PMI Testing
0 275 psi Bolt Tensile Testing
(18.9 bar) kg)

Customer Specified

Testing

Wetted / Non- Wetted Accessories

AL / AL Charging Kits
ECAL/ ECAL Bladder Replacement Kits
Hardware Replacement Kits
SS / SS
CS / AL Pressure Relief Valves
CS / CS Back Pressure Valves
ECCS/ ECCS
ECCS/ AL Gauge Guards
SS / AL Gauge Upgrades
SS / CS Spill Containment for AODD
SS / ECCS
A20 / A20
A20 / SS
HAST / HAST
HAST / SS
SS / SS
SSP / SSP

.BLACOH.com [email protected] 14

2310 in3 (37.9 L; 10 gallon)

SENTRY V

Series Body Material Bladder Inlet Size In
Material Material

Metal

Carbon Steel (CS) Buna-N 3" to 6" A
Epoxy Coated Carbon Steel EPDM (80 to 150 mm)
Hypalon
(ECCS) Neoprene
316 Stainless Steel (SS) Silicone (Food Grade)
Duplex Stainless Steel Viton

(DSS)

Metal Series Wetted / Non- Wetted Accessorie

5040 CS / CS Charging K
5045 ECCS / ECCS Bladder Replacem
5420 Hardware Replace
5440 SS / SS
5445 CS / CS Pressure Relief
5620 ECCS / ECCS Back Pressure V
SS / SS
Gauge Guar
Gauge Upgra
Spill Containment

800.603.7867 951.342.3100 www.

nlet Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

ANSI Flange 275 psi Adjustable 145 to 155 lbs ATEX
DN Flange (18.9 bar) Automatic (65.77 to 70.31 kg) ISO 9001:2008
Chargeable
Inlet Stabilizer NAFTA
PED
ARRA

3.1 Cert.
Material Cert.
Cert. of Origin
Hydrostatic Testing
Dye Penetrant Test
X-Ray/Radiography
PMI Testing
Bolt Tensile Testing
Customer Specified

Testing

es

Kits
ment Kits
ement Kits
Valves
Valves
rds
ades
for AODD

.BLACOH.com [email protected] 15

1.0, 1.5, & 2.0” AODD Pumps

AODDampener

Series Body Material Bladder Inlet Size
Metal Material

316 Stainless Steel (SS) PTFE back Buna 1.0” (25 mm
1.5” (40 mm
2.5” (50 mm

Series Size & Inlet Accessorie

AOD-10-NPT 1.0” NPT Charging K
AOD-10-BSP 1.0” BSP Bladder Replacem
Hardware Replace
AOD-15-NPT 1.5” NPT
AOD-15-BSP 1.5” BSP Pressure Relief
Back Pressure V
AOD-20-NPT 2.0” NPT
AOD-20-BSP 2.0” BSP Gauge Guar
Gauge Upgra
Spill Containment

800.603.7867 951.342.3100 www.

Inlet Type Max Pressure Air Control Est. Shipping Certifications
Type Weight & Testing

m) FNPT 150psi Fully 18 lbs ATEX
m) BSP (10.3 bar) Automatic (8.16 kg) ISO 9001:2008
m) Material Cert.
Cert. of Origin
Hydrostatic Testing

es About

Kits The Blacoh AODDampener is specifically designed for
ment Kits AODD pumps and constructed of 316L Stainless Steel
ement Kits with a PTFE back diaphragm. The single configuration
Valves will allow the unit to handle most AODD applications
Valves and is great of off-the-shelf capabilities.
rds
ades
for AODD

.BLACOH.com [email protected] 16

SUPPORTING PRODUCTS

SENTINEL Gauge G

Series Body Material Bladder Inlet Size
Material Material

Plastic CPVC EPDM 1/2"
Polypropylene (PP) PTFE (12.7 mm)
Metal Viton
PVC 1/2"
PVDF (12.7 mm)

Alloy 20 (A20)
Stainless Steel (SS)

Plastic Series Wetted / Non- Wetted Metal Series W

PVDF PVDF / PVDF A20
CPVC CPVC / CPVC SS
PVC
PVC / PVC
PP PP / PP

800.603.7867 951.342.3100 www.

Guard/Diaphragm Seal

Inlet Type Max Pressure Est. Shipping Certifications
Weight & Testing

FNPT 200 psi 1-2 lbs ATEX
BSP (13.7 bar) (0.5 to 0.9 kg) ISO 9001:2008
Socket Weld
Union Fitting 1000 psi 2-3 lbs NAFTA
(68.9 bar) (0.9 to 1.4 kg) PED
ARRA

3.1 Cert.
Material Cert.
Cert. of Origin
Customer Specified

Testing

Wetted / Non- Wetted About

A20 / A20 SENTINEL Diaphragm Seals employ a chemically
SS / SS resistant diaphragm to effectively isolate process
fluids from gauges and other process instrumentation.
This durable diaphragm allows SENTINEL to accurately
transfer process pressure without direct contact with
hazardous or corrosive fluids.

.BLACOH.com [email protected] 17

SUPPORTING PRODUCTS

SPILLSTOP Leak C

Series Body Material Lid Material Inlet Size I
Material

Hastelloy C (HAST) Noryl 3/4-1”
Polypropylene (PP) PVDF (19-25 mm)
Stainless Steel
PVC
PVDF
Stainless Steel (SS)

Series Housing/Lid Ab

SPS-10 PP / NORYL The SPILLSTOP Leak Con
SPS-11 PVC / NORYL directly to the exhaust o
SPS-20 SS / NORYL pump. When pump diap
SPS-21 captures dangerous and/
SPS-30 SS / SS in an internal receptacle
SPS-31 PVDF / NORYL to automatically shut do
SPS-33 PVDF / PVDF also be configured to sou
SPS-39 PVDF / PVDF initiate a backup pump s
SPS-80 PVDF / NORYL
HAST / NORYL

800.603.7867 951.342.3100 www.

Containment

Inlet Type Add On Air Inlet Est. Shipping Certifications
Weight & Testing

FNPT Whistle 1/4” 25-55 lbs ATEX
BSP Electronic (6.4 mm) (11.3 to 25.0 kg) ISO 9001:2008

Switch NAFTA
ARRA
3.1 Cert.
Material Cert.
Cert. of Origin

bout 18

ntainment System attaches
of an air operated diaphragm
phragms fail, SPILLSTOP
/or expensive process fluid
e while raising a float switch
own the pump. SPILLSTOP can
und a warning alarm and/or
switchover.

.BLACOH.com [email protected]

SUPPORTING PRODUCTS

SENTINELTM Pressure Relief Valve

SENTINEL Pressure Relief Valves protect
pumping systems from over-pressure
damage caused by defective equipment
or a blockage in the system line. They
consist of a spring and diaphragm that is
pushed down on a seat to a preset
adjustable pressure setting. Once the
pressure is exceeded, the seat is lifted off
the relief port and the excess fluid
pressure flows back to a holding tank or
the suction side of the pump. When the
pressure is reduced, the spring pushes
the seat back over the discharge port.

SENTINELTM Check Valve & Poppet Valve SENTINELTM Calib

By preventing reverse Calibration columns
flow, SENTINEL Ball Check or cylinders give
Valves and Poppet Valves accurate calibration
can be used as one-way of chemical meter-
valves, injection valves, ing pumps and
or to prevent backflow. enhance feed
The internal ball or systems by verifying
poppet functions as a the fluid flow rate.
positive shutoff to ensure They are offered in
process fluid does not go clear PVC or
back up the line. Borosilicate glass.

800.603.7867 951.342.3100 www.

SENTINELTM Back Pressure Valve

SENTINEL Back Pressure Valves enhance
system performance by applying a
continuous back pressure to the pump.
The diaphragm is held against the valve
seat by an internal ring. When the
valve’s present pressure is exceeded,
the diaphragm is forced up and system
fluid flows through the valves to the
injection point.

bration Column Charging Kit

Charging Hose Kit for
Blacoh CT, H, TG or XP
models. Includes an
8’ (2.4 m) length of
hose with a 1/4” (6mm)
NPT male fitting at one
end for connection to
a regulator at the
Nitrogen source and
a charging fitting and
gauge on the opposite
end.

.BLACOH.com [email protected] 19

Air Control Types

TYPE DESCRIPTION

ADJUSTABLE -Mounted on single port
-Self relieving regulator
-Gauge and one-way check valve
-Compressed air line must be permane
to the regulator

AUTOMATIC -Mounted on single port
-Automatic valve assembly on center p
-Gauge and one-way check valve
-Automatically self adjusts as system pr
increases/decreases and resets when s

CHARGEABLE -Gauge and charging valve
-Leak-proof operation in corrosive envi
-No permanent source of compressed g
-Manually bled or charged to required

INLET STABILIZER -Adjustable for suction lift or positive in
-Consists of compound pressure gauge
vacuum tight ball valve and a Venturi v

800.603.7867 951.342.3100 www.

s

MAX PRESSURE INSTALLATION

ently attached 150 psi -Within 10 pipe diameters of pump discharge
(10.3 bar) -Connect to a constant source of air
-Do NOT use oxygen
-Charge dampener to 80% of operating pressure
-Adjust dampener PSI to minimize pulse level

port 150 psi -Within 10 pipe diameters of pump discharge
(10.3 bar) -Connect to a constant source of air
ressure -Do NOT use oxygen
system restarts -Dampener gauge will read system pressure
-No further adjustments are needed

ironments 10,000 psi -Within 10 pipe diameters of pump discharge
gas (689.5 bar) -Charge to recommended percentage of
pressure system operating pressure with
compressed air or clean dry nitrogen
-Do NOT use oxygen

nlet conditions 30 inHg -Within 10 pipe diameters of pump discharge
e, a pressure/ (30 psi) -Use compressed air line and air chuck to
valve (2.1 bar) pressurize or create a vacuum
-Do NOT use oxygen
-Vacuum charge to 5-7 inHg for suction lift or
charge to 50% of static inlet pump pressure
for flooded suction

.BLACOH.com [email protected] 20

SIZE & MATERIALS

Bladders & Bellow

CAPACITY BLADDERS PTFE BELLOWS

4 to 10 in³
(0.06 to .16 L)

8 in³
(0.13 L)

12 in³
(0.20 L)

24 in³
(0.39 L)

36 to 85 in³
(0.59 to 1.40 L)

800.603.7867 951.342.3100 www.

ws BLADDERS PTFE BELLOWS
21
CAPACITY

175 to 370 in³
(2.87 to 6.06 L)

275 in³
(4.50 L)

577 in³
(9.46 L)

1155 in³
(5 gal)
(18.93 L)

2310 in³
(10 gal)
(37.85 L)

AODDampener

1.0, 1.5, 2.0” Inlet
(25, 40, 50 mm)
PTFE Back Diaphragm

.BLACOH.com [email protected]

TEMPERATURE LIMITS

Bladders & Bellow

ELASTOMER MATERIALS TEMPERATURE LIMITS

Aflas 0°F to +400°F (-18°C to +204°C) Hig
Buna +10°F to +180°F (-12°C to +82°C) Goo
FDA Buna +10°F to +180°F (-12°C to +82°C) FDA
EPDM -60°F to +280°F (-51°C to +138°C) Use
Hypalon -20°F to +275°F (-29°C to +135°C) Exc
Neoprene 0°F to +200°F (-18°C to +93°C) Goo
PTFE -20°F to +220°F (-29°C to +104°C) Bel
Santoprene -20°F to +225°F (-29°C to +107°C) Exc
FDA Silicone -20°F to +300°F (-29°C to +149°C) FDA
USP Class VI Silicone -20°F to +300°F (-29°C to +149°C) Pha
Viton® -10°F to +350°F (-23°C to +177°C) Use

800.603.7867 951.342.3100 www.

ws

APPLICATIONS
gh temperature, petroleum based chemicals, strong acids and bases.
od flex life; use with petroleum, solvents and oil-based fluids.
A-approved food grade; similar characteristics of regular Buna.
e in extreme cold; good chemical resistance with ketones, caustics.
cellent abrasion resistance; good in aggressive acid applications.
od abrasion resistance and flex; use with moderate chemicals.
llows design; excellent flex life; use with highly aggressive fluids.
cellent choice as a low cost alternative for PTFE in many applications.
A-approved food grade material; for use in food and pharmaceutical processing.
armaceutical grade material; for use in food and pharmaceutical processing.
e in hot and aggressive fluids; good with aromatics, solvents, acids and oils.

.BLACOH.com [email protected] 22

TESTING & CERTIFICATIONS

TESTING & ENGINEERING PARTS

STANDARD UNIT TEST CERTIFICATION ALL UNITS

HYDROSTATIC TEST & CERTIFICATE ALL UNITS

HYDROSTATIC TEST & CERTIFICATE – WITNESSED ALL UNITS

XRAY EXAM & DYE PENETRANT TEST METAL UNITS
DYE PENETRANT TEST METAL UNITS
XRAY/RADIOGRAPHY METAL UNITS
POSITIVE MATERIAL INDENTIFICATION ALL METAL HOUSINGS
BOLT TENSILE TEST REPORT BOLTS
GAUGE TESTING GAUGES
SPILLSTOP UNIT TESTING SPILLSTOP
CUSTOMER OR THIRD PARTY INSPECTION
ASME CALCULATIONS

MATERIAL CERTIFICATION PARTS

MATERIAL CERTIFICATION & CERTIFICATE OF CONFORMANCE SENTRY PRODUCT (NO LOT NUMBER
MATERIAL CERTIFICATION & CERTIFICATE OF CONFORMANCE SPILL STOP PRODUCT (NO LOT NUMB
GAUGE GUARD PRODUCT (NO LOT
MATERIAL CERTIFICATION & CERTIFICATE OF CONFORMANCE NUMBERS)
ALL ORDERS
CERTIFICATE OF CONFORMANCE TO PO BLADDER
MATERIAL CERTIFICATION & CERTIFICATE OF CONFORMANCE WETTED & NONWETTED HOUSING
MATERIAL CERTIFICATION & CERTIFICATE OF CONFORMANCE WETTED HOUSING & BLADDER
MATERIAL CERTIFICATION & CERTIFICATE OF CONFORMANCE WETTED & NONWETTED HOUSING,
BLADDER
MATERIAL CERTIFICATION & CERTIFICATE OF CONFORMANCE WETTED HOUSING OF UNIT

CERTIFICATION OF OIL FREE WETTED ASSEMBLY WETTED HOUSING - METAL ONLY
MILL TEST REPORT (MTR) CHEMICAL COMPOSITION & HEAT
NUMBER WETTED, NONWETTED HOUSING –
MILL TEST REPORT (MTR) CHEMICAL COMPOSITION & HEAT METAL ONLY
NUMBER WETTED HOUSING - METAL ONLY
3.1 (EN10204) CERTIFICATION WETTED, NONWETTED HOUSING –
METAL ONLY
3.1 (EN10204) CERTIFICATION
SENTRY PRODUCTS
3.1 (EN10204) CERTIFICATION & HYDRO TESTING

CE STATEMENT VARIOUS
SILICONE FREE STATEMENT ALL PRODUCTS

800.603.7867 951.342.3100 www.

PART NUMBER NOTES

DOC-TEST CERT STANDARD BFC TEST PERFORMED ON ALL UNITS
NO MODIFICATIONS TO TESTING PROCEDURE
DOC-HYDRO STANDARD BFC FORMAT DOCUMENT
DOC-HYDRO TEST-
WITNESSED CONSULT FACTORY FOR DETAILS
DOC-XRAYDYE
DOC-DYE CONSULT FACTORY FOR DETAILS
DOC-XRAY CONSULT FACTORY FOR DETAILS
DOC-PMI CONSULT FACTORY FOR DETAILS
DOC-BOLT CONSULT FACTORY FOR DETAILS
DOC-GAUGE STANDARD BFC FORMAT DOCUMENT
DOC-TEST-SS STANDARD BFC FORMAT DOCUMENT
CONTACT FACTORY STANDARD BFC FORMAT DOCUMENT
ASME CALC CONSULT FACTORY FOR DETAILS
CONSULT FACTORY FOR DETAILS

RS) PART NUMBER NOTES
BERS)
DOC-MC-SENTRY STANDARD BFC FORMAT DOCUMENT
DOC-MC-SS STANDARD BFC FORMAT DOCUMENT

DOC-MC-GG STANDARD BFC FORMAT DOCUMENT

DOC-COC STANDARD BFC FORMAT DOCUMENT
DOC-MCB STANDARD BFC FORMAT DOCUMENT
DOC-MCWN STANDARD BFC FORMAT DOCUMENT
DOC-MCWB STANDARD BFC FORMAT DOCUMENT

DOC-MCWNB STANDARD BFC FORMAT DOCUMENT

DOC-OIL STANDARD BFC FORMAT DOCUMENT

DOC-MTR-METAL-W CHEMISTRY REPORT FROM FOUNDRY (NOT AVAILABLEONALLPRODUCT)

DOC-MTR-METAL-WN CHEMISTRY REPORT FROM FOUNDRY (NOT AVAILABLEONALLPRODUCT)

DOC-CERT 3.1-W CHEMISTRY REPORT FROM FOUNDRY (NOT AVAILABLEONALLPRODUCT)

DOC-CERT 3.1-WN CHEMISTRY REPORT FROM FOUNDRY (NOT AVAILABLEONALLPRODUCT)

DOC-CERT 3.1H CHEMISTRY REPORT FROM FOUNDRY & HYDRO TEST
DOC-CE1 (NOT AVAILABLEONALLPRODUCT)
DOC-SILICONE
COMPLIANCE WITH PED CAT 1, GROUP 1
(NOT AVAILABLEONALLPRODUCT)

STANDARD BFC FORMAT DOCUMENT

.BLACOH.com [email protected] 23

TESTING & CERTIFICATIONS

ORDER DOCUMENTATION PARTS

NAFTA CERTIFICATION NORTH AMERICA ORDERS
CERTIFICATION OF ORIGIN ANY ITEM
CERT OF CONFORMANCE FOR ORDER ANY ORDER
EC ATEX DECLARATION OF CONFORMITY ALL ATEX UNITS
EC ATEX DECLARATION OF CONFORMITY IN GERMAN ALL ATEX UNITS
EC PED DECLARATION OF CONFORMITY ALL PED UNITS
EC WORK TEST CERTIFICATE ALL PED UNITS
DOCUMENTATION-NON STANDARD-CUSTOMER
SPECIFIED

CERTIFICATES OF ORIGIN PARTS

CERTIFICATE OF ARRA BUY AMERICAN ACT ALL
CERTIFICATE OF PRODUCTS MADE IN USA ALL

CERTIFICATE OF PRODUCTS MADE IN USA (FOR KOREA) ALL - USE FOR KOREA ONLY

CERTIFICATE OF PRODUCTS MADE IN USA (FOR ALL - USE FOR NIKKISO KOREA ON
NIKKISO KOREA)

DRAWINGS PARTS

STANDARD PRODUCT OUTLINE DRAWING ALL UNITS
STANDARD CERTIFIED PRODUCT OUTLINE DRAWING ALL UNITS
SPECIAL CERTIFIED PRODUCT OUTLINE DRAWING ALL UNITS

FEES PARTS

CUSTOMER SUPPLIED GAUGE MOUNTED ON PRODUCT GAUGE GUARDS
FILLING OF GAUGE GUARD - 2" AND UNDER GAUGE GUARDS
FILLING OF GAUGE GUARD - 3" AND OVER GAUGE GUARDS
FILL, MINERAL OIL, 2" INSTRUMENTS AND UNDER GAUGE GUARDS
FILL, MINERAL OIL, 3" INSTRUMENTS AND OVER
LABOR ANY ORDER
FILL FOR SPECIAL INSTRUMENTATION ANY ORDER
PMT BY WIRE TRANSFER UNDER $1,000

DROP SHIP OUTSIDE THE UNITED STATES

CANCELLATION FEE

800.603.7867 951.342.3100 www.

PART NUMBER NOTES

DOC-NAFTA STANDARD BFC FORMAT DOCUMENT
DOC-COO STANDARD BFC FORMAT DOCUMENT
COC STANDARD BFC FORMAT DOCUMENT
DOC-EC STANDARD BFC FORMAT DOCUMENT
DOC-EC-GR STANDARD BFC FORMAT DOCUMENT
DOC-EC-PED STANDARD BFC FORMAT DOCUMENT
DOC-EC-WORK THIS IS A MINIMUM FEE. MAY VARY BY ORDER.
CONSULT FACTORY.
DOC-CS

PART NUMBER NOTES

DOC-ARRA STANDARD BFC FORMAT DOCUMENT

DOC-COO-USA STANDARD BFC FORMAT DOCUMENT

DOC-COO-USA-K COMPLIANCE TO KOREA-USA FREE TRADE AGREEMENT-
STANDARD BFC DOCUMENT

NLY DOC-COO-USA-NIK COMPLIANCE TO KOREA-USA FREE TRADE AGREEMENT-
STANDARD BFC DOCUMENT

PART NUMBER NOTES

N/A AVAILABLE AT WWW.BLACOH.COM
N/A SIGNED & DATED BY BLACOH ENGINEERING DEPT
N/A SIGNED & DATED BY BLACOH ENGINEERING DEPT

PART NUMBER NOTES

CSG CAN BE ANY TYPE OF INSTRUMENTATION
FILL CAN BE ANY TYPE OF INSTRUMENTATION
FILL-3 CAN BE ANY TYPE OF INSTRUMENTATION
FILL-M CAN BE ANY TYPE OF INSTRUMENTATION
FILL-M PER HOUR
LABOR VARIES BY TYPE
FILL-SPECIAL BANK FEE CHARGED FOR SMALL WIRES
BANK THIS IS A MINIMUM FEE. MAY VARY BY ORDER.
CONSULT FACTORY.
DROP SHIP

CANCEL

.BLACOH.com [email protected] 24

Pressure (PSI)PERFORMANCE CHARTS

Pressure (PSI)Triplex Pump

With SENTRY XPH Dampener
Without Dampener
(1715 rpm, 757 pulses/s)
With XPH Flow-Thru
Dampener (± 4 PSI)

Triplex Pump

With SENTRY XP Dampeners
Without Dampener
With XPA Dampener
With XPH Flow-Thru
Dampener

800.603.7867 951.342.3100 www.

Time (Seconds)

Time (Seconds) 25

.BLACOH.com [email protected]