ANHDCOOMNABSTRTCROUHDC-MTNEIOAYNUA2PR0SLO17MSEOS
Built tough, for serious heavy duty performance
Industry leader in
AC Brushless Technology
Hitachi’s AC Brushless technology Brushless motor
is the most cutting edge brushless
technology available and provides Conventional commutator motor
more efficiency, increased power and Armature can
extended durability with essentially no burn out
motor maintenance.
Commutator wears Large
Hitachi’s AC Brushless tools regulate the power supply cooling
for stable performance even if the voltage drops. fan
required
An integrated power inverter continually monitors the Carbon brushes wear
electrical flow and load conditions so the tool can operate
with a longer extension cord and off a generator without loss
of performance.
Features and Benefits
Increased power for optimal tool performance
L ess maintenance, less wear and tear and less tool failure
Voltage drop doesn’t affect tool performance
Compatible with generators: AC Brushless models
aren’t affected by the poor power output often
experienced with lower spec generators.
Compatible with generators Hitachi’s revolutionary
integrated power inverter
Equipped with Hitachi’s original, compact and
highly efficient inverter circuit, the brushless motor Every Hitachi AC Brushless Power Tool has been fitted with
works with portable petrol generators that might its very own compact power inverter. This inverter allows for
not have an on-board inverter. the tool to be compatible with generators and long extension
cords, while still achieving optimal performance without any
Up to 100 metres loss of power traditionally caused by voltage drop. Hitachi’s
innovative AC brushless motor paired with its compact inverter,
Consistent performance provides long service life and maintenance-free operation
during voltage drop (AC) making it the preferred option for industry professionals.
The Brushless motor runs cooler, and its
performance isn’t affected as much by voltage
drop from long extension cords on site.
MORE Power, MORE Life,
MORE Heavy Duty
Built tough like no other Power Tool, Motor Handle
Hitachi’s AHB construction technology cover
offers the toughest and most extreme Insulating internal
heavy duty tools available in today’s motor holder Solid die-cast
tool market. alloy core
Solid Alloy Core
With unprecedented performance, insulating internal layer
and extreme construction durability,
Hitachi’s AHB range are made for
seriously tough jobs.
Features and Benefits
E xtreme body strength: AHB Alloy Construction
provides maximum strength, protection and durability
for the tool’s body
S uperior safety: Inner surface of the alloy
core is lined with an insulating layer and
meets NZ Electrical Safety Compliance.
Maximum heat distribution: AHB provides optimal
cooling efficiency, by pulling heat away from the motor
and releasing from the tool.
T rue Precision: Strong alloy core body ensures that
moving parts like motor bearings are still fixed in a metal
‘chassis’ resulting in reduced vibration and stress while
still providing true precision over long periods of use.
Handle damper
Holder (B)
Hitachi’s innovative and Industry leading Low Vibration Handle shaft Holder (A)
Protection technology reduces user’s fatigue caused from
vibrations when working for prolonged periods. Designed Movement of the weight Movement of the weight
with counterbalance innovation and shock absorbing handles, Vibration direction
Hitachi’s advanced UVP technology achieves maximum work Vofibtrhaetimonaidnirbeocdtiyon Weight of the main body
performance and Health & Safety compliance.
Coil Spring Coil Spring
Features and Benefits Weight
S uperior counter balance technology resulting with up Internal counterbalance design where a weight and two
to 33% lower tool vibration springs move in opposite direction of the main body,
this partnered with a shock absorbing handle results in
Intelligent shock absorbing rubber handles, reduces approx. 33% Lower vibration.
vibration transferred from the tool through to the
handle, and improve tool control and handling
P rovides user comfort and reduces fatigue, achieving
maximum work efficiency and higher tool performance
*V arious models utilise different UVP vibration reduction methods.
MOST ADVANCED AC BRUSHLESS
DEMOLITION HAMMERS
NEW SDS MAX Brushless Demolition Hammer
H60MEY
High performance AC Brushless motor –
resistant to voltage drop and poor generator output
2 0 Joule high demolition performance
1,500W power
AHB design (Aluminium Housing Body)
UVP feature (User Vibration Protection)
Standard with bull point, adjustable side handle and carry case
37%Approx. 10%Approx. DEMOLITION PERFORMANCE (kg/30min.)
higher higher H60MEY 165kg
performance performance PREVIOUS MODEL H60MR 149kg
than competitor 3 than previous model Competitor 1 149kg
H60MR
Competitor 2 149kg
Competitor 3 120kg
IMPACT ENERGY (joules)
H60MEY 20J
PREVIOUS MODEL H60MR 18.0J
Competitor 18.6J
Competitor 16.8J
*Based on manufacturer data published in New Zealand as of August 2016.
NEW SDS MAX Brushless Demolition Hammer
H45MEY
High performance AC Brushless motor –
resistant to voltage drop and poor generator output
8 .5 Joule high demolition performance
1 ,150W power
A HB design (Aluminium Housing Body)
U VP feature (User Vibration Protection)
Standard with bull point, adjustable side handle and carry case
Demolition Hammers
Best performing, most advanced demolition hammers ever
NEW 45.0J Heavy Duty Demolition Hammer
H65SB3(G1)
4 5J of impact energy
U ser Vibration Protection (UVP)
H eavy duty Aluminium Housing Body (AHB)
Capable of demolishing 338kg
of concrete in 30 minutes –
19% higher performance
than previous H65SB2 model
Fitted with auto-stop brushes
for maximum protection
G rease-packed lubrication system for long life
1 ,340W power input
Standard with bull point, adjustable side handle and carry case with wheels
19%Approx. 7.5%Approx. DEMOLITION PERFORMANCE (kg/30min.) 338kg
H65SB3
higher higher
PREVIOUS MODEL H6SB2 287kg
performance performance
Competitor 1 315kg
than previous model than Competitor 1
H65SB2 Competitor 2 292kg
Competitor 3 287kg
IMPACT ENERGY (joules)
H65SB3 45.0J
PREVIOUS MODEL H65SB2 42.0J
Competitor 1 45.0J
Competitor 3 41.0J
*Based on manufacturer data published in New Zealand as of October 2016. Competitor 2 33.8J
Demolition Hammer Accessories FOR SDS MAX PART NO. SIZE (mm)
Bull Point 313471 280
FOR H65SB3 PART NO. SIZE (mm) Cold Chisel 313472 400
Bull Point 751543 410 Cutter 313473 280
Scoop 313474 400
Cold Chisel 401990 410 313475
400 x 50
Cutter 751545 410 x 75 313476
400
Scoop 319298 380 FOR H90SG PART NO.
(Clay Spade) Bull Point 985230 SIZE (mm)
Cold Chisel 985231 520
Warratah/ 797012 51mm Cutter 985232 520
Marquee Peg Driver (ID Diameter)
Scoop (Clay Spade) 985233 520 x 72
13mm Earthing 797013
Rod Driver 546
MADE TOUGH, BUILT FOR THE
HARDEST JOBS ON SITE
70.0J Demolition Hammer
H90SG(G1)
70J of impact energy
B est in class for demolition performance
U ser Vibration Protection (UVP)
Heavy duty Aluminium Housing Body (AHB)
C apable of demolishing 512kgs of concrete in 30 minutes2
Internal double insulation construction for superior durability
2 ,000W Power input
Standard with wrench. Bull point not included.
Best in Class
IMPACT ENERGY
H90SG 70J
H90SE 55J
7 0J Impact energy
U p to 27% higher impact energy1
DEMOLITION PERFORMANCE (kg/30min.)
H90SG 512kg
H90SE 349kg
512kg/30min. demolition performance2
Up to 47% higher demolition performance1
10.0J Demolition Hammer
H41MB
1 0J of Impact Energy
C ompact design, powerful and lightweight (5.1kg)
C apable of demolishing 80kg of concrete in 30 minutes2
A ccepts SDS Max bits
Q uick release bit holder for fast bit changes
930W Power input
Standard with bull point, adjustable side handle and carry case.
1. In comparison with the model H90SE.
2. The demolition amounts for 30 minutes are reference only. They may vary according to demolition materials and other conditions
Brushless Rotary Hammers
Top in class, unmatched brushless performance, superior heavy duty
52mm SDS Max Brushless Rotary Hammer Drill
DH52MEY(G1)
High performance AC brushless motor
– provides safe, stable operation
with generators, without loss
of tool performance.
Voltage drop doesn’t affect tool performance
Highest demolition performance and fastest drilling speed in their class
User Vibration Protection (UVP)
Heavy duty Aluminium Housing Body (AHB)
Built-in electronic 4-stage control switch
2-mode – hammer only and hammer drilling
1,500W power input
Standard with side handle, depth gauge and carry case
(supplied without drill bit).
40mm SDS Max Brushless Rotary Hammer Drill
DH40MEY(G1)
H igh performance AC brushless motor – provides safe,
stable operation with generators, without loss of tool performance.
Voltage drop doesn’t affect tool performance
H ighest demolition performance and
fastest drilling speed in their class
U ser Vibration Protection (UVP)
H eavy duty Aluminium Housing Body (AHB)
B uilt-in electronic 4-stage control switch
2 -mode – hammer only and hammer drilling
1 ,150W power input
Standard with side handle, depth gauge and carry case (supplied without drill bit).
Performing faster,
smarter than the rest
28mm SDS+ Max Rotary Hammer Drill
DH28PCY
H igh Performance 850W motor
3 -mode – Drill only, Hammer Drilling and Hammer only
H itachi’s User Vibration Protection – approx. 33% lower vibration*
Idle striking prevention mechanism reducing
vibration and noise during no-load operation
V ariable speed and reverse
Standard with double-moulded side handle, depth gauge
and carry case (supplied without pictured drill bit).
*In comparison with conventional model DH24PC3
26mm SDS+ Max Rotary Hammer Drill
DH26PC
H igh Performance 830W motor
3 -mode – Drill only, Hammer Drilling and Hammer only
I dle striking prevention mechanism reducing
vibration and noise during no-load operation
V ariable speed and reverse
Standard with double-moulded side handle, depth gauge and carry case
(supplied without drill bit).
HITACHI 3 YEAR
HEAVY DUTY WARRANTY
HBirtaucshhliePssowMesrsTaogoelsORanWdAHRiRtaAcNhTiYOMuetdssoaogrePower Equipment are
warranted against defective workmanship and faulty materials
for a period of three (3) years from the date of purchase.*
Warranty Registration must be made by the purchaser at
www.hitachipowertools.co.nz within 30 days of purchase.
(Products that are not eligible for the three year warranty (Benchtop Tools, Cordless Accessories
& Outdoor Power Equipment used commercially etc.) are NOT required to be registered online.)
Brushless Impact Wrench
Higher Torque, impressive power, unmatched brushless performance
1/2” AC Brushless Impact Wrench
WR16SE(G1)
3 60Nm tightening torque
H igh performance 370W AC brushless motor
B uilt-in 4-stage control switch makes it easy
to adjust impact rate and rotation speed
A C brushless provides stable performance when used with generators
and isn’t effected by voltage drops from long extension leads
S oft-start and electric brake supressing kickback when starting and stopping
Standard with case and belt hook (socket not included).
3/4” AC Brushless Impact Wrench
WR22SE(G1)
6 20Nm tightening torque
H igh performance 800W AC Brushless motor
M aintenance-free, no risk of armature burnout, or need to replace carbon brushes
H eavy duty Aluminium Housing Body (AHB)
A C brushless provides stable performance when used with generators
and isn’t affected by voltage drops from long extension leads
Standard with side handle and case (socket not included).
1” AC Brushless Impact Wrench
WR25SE(G1)
1 000Nm tightening torque
H igh performance 900W AC brushless motor
M aintenance-free, no risk of armature burnout, or need to replace carbon brushes
H eavy duty Aluminium Housing Body (AHB)
A C brushless provides stable performance when used with generators
and isn’t affected by voltage drops from long extension leads
Standard with side handle and case (socket not included).
HEAVY DUTY DRILLING
Unmatched heavy duty drilling performance
20mm Heavy Duty Impact Drill
DV20VD(G6)
P owerful 860W motor
H eavy duty Aluminium Housing Body (AHB)
Q uick ‘impact’ – ‘non-impact’ switching
H eavy duty steel cased 13mm keyless chuck
F orward/reverse carbon brush rotation system
for maximum power and longer brush life
S afety slip clutch to reduce reaction force to sudden excessive load
Standard with side handle, depth gauge and stackable system case
(supplied without drill bit).
22mm Heavy Duty Impact Drill
DV22V(G6)
P owerful 1,120W motor
H eavy duty Aluminium Housing Body (AHB)
Q uick ‘impact’ – ‘non-impact’ switching
H eavy duty steel cased 13mm keyless chuck
F orward / reverse carbon brush rotation system
for maximum power and longer brush life
S afety slip clutch to reduce reaction force to sudden excessive load
Standard with side handle, depth gauge and stackable system case
(supplied without drill bit).
Slide Compound Mitre Saws
Powerful intelligent design, now lighter and more compact
305mm Slide Compound Mitre Saw
C12RSH2
N ew lighter weight design
C ompact slide system with large cutting capacity
Powerful 1,520W motor
P roven belt drive system for safety and durability
6 03mm wide base
Sliding sub-fence to support large work pieces
Laser marker for marking precise cutting path
Dual bevel ‘left / right 45 degrees’
Positive stops for quick
mitre angle setting
Standard with TCT blade,
dust bag, vice assembly and wrench
Compact slide Saw head Saw head
system with in the full in the front
large cutting back position position
capacity
890mm
features a fixed rail slide design IN DEPTH
that eliminates the need for rear
clearance to accommodate the
extension of the sliding rails.
This system allows the saw to sit up
against a wall or to be placed in tight
work areas, without compromising
cutting capacity.
Universal Mitre Saw Stand
UU750
Suits Hitachi and most other Mitre Saws
Quick fit saw mounting for ‘four point’ style saws
Dual extension arms – extends to 2.9m
F olds to a compact size for easy transportation
Includes adaptor for – C8FSE(H1), C10FSB, C10FSH, C10FCE2
Compound Mitre Saws
Powerful, compact, and more advanced.
NEW 216mm Slide Compound Mitre Saw
C8FSE(H1)
L ightweight, compact and Powerful with a 1,050W motor
Linear ball bearing slide system for superior accuracy and control
Slide guide rigidly by dual linear ball bearings, for superior accuracy
Positive mitre stops for increased usability and accuracy
Rigid die cast base with turn table for increased user safety
Quick change depth adjustment guide for improved usability
Standard with TCT blade, dust bag, vice assembly and wrench.
255mm Compound Mitre Saw
C10FCE2
P owerful 1,520W motor
L ightweight and compact design – weighs just 12kg
M itre cut left and right, bevel cut left, plus compound cut
P ositive mitre stops for quick and easy adjustment
Supplied with blade, dust bag, vice assembly and wrenches.
‘Godzilla’ Sabre Saw
CR13VB
P owerful 1,050W motor
U nique ‘swing’ action for faster cutting of most materials
O ne-handed, tool-less blade changing and tool-less
shoe plate adjustment
S peed controlled by both a pre-set dial
and the trigger switch
R ubber, non-slip, front and rear hand grips
A dditional wide range of Hitachi blades available
Standard with blade and carry case
Heavy Duty Angle Grinders
MORE powerful, MORE advanced, MORE heavy duty.
230mm Heavy Duty Angle Grinder
G23MR
2 ,400W motor with high overload durability
Super tough alloy outer casing with
double-insulated polycarbonate inner layer
E asy to operate trigger switch
3-position anti-vibration side handle
Tool-less guard adjustment
L ow profile head for access into confined areas
Auto-stop brushes and anti-dust airflow
system for maximum motor protection
Standard with grinding wheel, wrench, wheel washer,
wheel nut, cut-off wheel mounting nut and side handle
125mm Heavy Duty Angle Grinder
G13SW(G1)
A dvanced ergonomics resulting in new slim
body design – only 202mm diameter
N ew anti-vibration side handle and
quick adjust tool-less guard
Powerful 1,200W motor with increased
overload and dust durability
N ew ultra compact gearbox design
for better tight area access
S ide mounted switch design
Standard with grinding wheel, wrench and side handle
125mm Heavy Duty Angle Grinders
G13SR4
Strong alloy gearbox
Heat resistant, high powered 730W motor
S pindle lock
Ergonomically angled side handle
Standard with grinding wheel, wrench, side handle and carry case
Heavy Duty Circular Saws
High performance circular saws built tough, last longer
165mm AC Brushless Circular Saw
C6MEY(G1)
H igh efficiency AC Brushless motor
1 65mm blade with deep cut configuration – max cut 66mm at 90°
S uper compact and lightweight
S ilent mode lowers the noise by reducing the
max motor RPM, enabling smooth cutting
S mallest in class and well-balanced
Q uick and easy blade change
R esistant to voltage drop
C ompatible with generators
Standard with blade and wrench.
Optional parallel guides
250mm #316161
650mm #316104
235mm Circular Saw
C9SA3
H igh performance, heavy duty model
N ew aluminium saw cover for more durability
N ew blower function, to blow away saw dust
4 metre long cord
P owerful 2,000W motor
Standard with TCT blade, wrench and side handle.
Best performing,
most advanced saws ever
185mm Heavy Duty Circular Saw
C7SB2
Super high powered 1710W motor
R ugged alloy base
H igh-tech magnesium gear case and guard
A nti-slip handle
S pindle lock
0 -55 degree bevel adjustment
Standard with TCT blade, wrench, parallel guide and carry case.
185mm Heavy Duty Circular Saw
C7YA
P owerful 1400W motor
C apable of achieving 90% dust collection
when connected to an external dust extractor
D esigned for use with a special polycrystalline diamond saw blade
C an be used with a standard blade for wood cutting
R obust nickel-plated base plate
Standard with dust bag, dust chute and wrench (supplied without blade).
82mm High Performance TCT Planer
P20SF
P owerful 620W motor
M ax cutting depth 2.6mm and rebate up to 9mm
P recise depth adjustment
A utomatic safety stand to protect blades and surfaces
Standard with mini reversible TCT blades, wrench, parallel guide and carry case
125mm Random Orbital Sander
SV13YB
P owerful 230W motor
H ook and loop pad
C ompact and lightweight
L arge soft grip, non-slip handgrip
H igh dust collecting performance
Standard with dust bag.
Built tough.
Driven to
outperform.
Hitachi brings you the
toughest heavy duty
power tools available
hitachipowertools.co.nz LIKE US ON
FACEBOOK
HitachiNewZealand