The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.

HONEYVILLE SERIES . BUCKET ELEVATORS. Honeyville Bucket Elevators feature heavy-duty components, jig welded for easy as-sembly. All pieces are galvanized for a du-

Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by , 2016-03-26 23:27:03

Galvanized For Long Life and Low Maintenance - Topeka, IN

HONEYVILLE SERIES . BUCKET ELEVATORS. Honeyville Bucket Elevators feature heavy-duty components, jig welded for easy as-sembly. All pieces are galvanized for a du-

Bucket
Elevators

Galvanized For Long Life and Low Maintenance

7 Sizes _ Capacities from 1,350 to 18,000 BPH

HONEYVILLE SERIES
BUCKET ELEVATORS

Honeyville Bucket Elevators feature heavy-
duty components, jig welded for easy as-
sembly. All pieces are galvanized for a du-
rable finish and long, maintenance free life.

The Honeyville design provides the ideal
grain discharge for the least wear based on
the rated capacities.

1. HEAD – Heavy-duty galvanized
steel construction designed for clean
discharge.

2. HEAD COVER – Sectioned and hinged
for easy service of internal components.

3. SHAFT MOUNTED – Gear reducer,
easily adjustable torque arm. Quality
belts and drive sheaves.

4. HEAD PULLEY – Crowned and fitted
with taper-lock bushings, non-slip rough
top lagging for maximum traction. (Slide
lagging is optional)

5. BEARINGS - High quality, heavy duty
bearings, easy maintenance for longer
life.

6. BELT – High strength PVC belt for
minimal stretch, impregnated solid
carcass, pre-punched for easy bucket
mounting. (SOR Rubber belt available)

7. BUCKETS - High Quality Polyethylene
CC Deep Terminal design.
(Steel buckets optional)

8. TRUNKING - Twin box construction.
Heavy gauge ASTM A-526 G90
galvanized steel Double seam, jig welded
for perfect alignment. Inspection sections
feature easy access to belt and buckets
through inspection doors.

9. BOOT - Heavy gauge galvanized steel.
Easy to adjust take-ups for boot pulley.
High or low, standard or expanded width
hopper. Hand slide clean-out gates
provided on both sides.

MODEL: 34-14 38-20 43-24 48-30 54-36 60-36 66-42

Standard Capacity 1,350 to 1,900 to 3,200 to 4,600 to 5,700 to 9,300 to 14,250 to
Range in BPH 1,550 2,250 3,750 5,750 8,000 13,000 18,000

Head & Boot Pulley Dia. 14” 20” 24” 30” 36” 36” 42”
10 Ga. 10 Ga. 3/16”
Head Section Steel ♦ 14 Ga. 12 Ga. 12 Ga. 10 Ga. 3/16” 3/16” 1/4”
Boot Section Steel ♦ 12 Ga. 10 Ga. 10 Ga. 3/16” 12” x 6” 16” x 7” 18” x 8”
Standard Bucket Size 6” x 4” 7” x 5” 9” x 5” 10” x 6” 14 Ga. 14 Ga. 12 Ga.
88-1/2” 92-1/2” 110”
Trunking Steel * ♦ 16 Ga. 14 Ga. 14 Ga. 14 Ga. 74-1/2” 74-1/2” 95-5/8”
A 40-1/4” 54-1/2” 61-1/4” 75-1/4” 95-5/8”
80” 80” 120”
B 35-1/2” 50-3/4” 56-3/8” 70-1/2” 120” 120” 120”
120” or 60” 120” or 60” 68-1/4”
C 38” 53-1/4” 58-7/8” 73” 55-1/8” 59-1/8” 14” x 26”
10” x 16” 12” x 20” 66”
D 120” 120” 120” 120” 56-1/2” 56-1/2” 44-1/2”
41-7/8” 42-1/4” 39-3/4”
E 120” or 60” 120” or 60” 120” or 60” 120” or 60” 34-7/8” 34-7/8” 16”
16” 15”
F 28-1/4” 37-1/8” 43-1/8” 49-1/8”

G (Trunking Dimension) 7-1/2” x 10” 9” x 11” 10” x 12” 10” x 14”

H-High Hopper (standard) 32-1/2” 36-1/2” 41-1/2” 47”

H-Low Hopper (optional) 24-3/8” 26-5/8” 27-7/8” 35-1/2”

I 13” 18-7/8” 22-7/8” 28-7/8”

J 6” 10” 12” 14”

♦ Heavier gauge of steel available on all sizes upon request
* When more than 80’ of trunking, the lower portion increases to the next heavier gauge

INSPECTION DOOR TRUNKING - Honeyville’s
No tools needed for unique design utilizes ten

door access. 90° bends for greater
vertical strength and
structural integrity.

HONEYVILLE METAL INC.

Honeyville Metal Inc. manufactures a complete line of commercial and agricultural
galvanized bucket elevators, pit type incline drag conveyors, horizontal drag conveyors,
manual and electronic controlled distributors, u-trough screw conveyors, conveyor
supports and towers with related accessories. Honeyville Metal equipment is being used
throughout the United States as well as in parts of Canada, South America, Asia, and
Europe.

Honeyville Metal began in 1951 in a rural area near Topeka, Indiana. Over the years our
facilities have grown steadily and we now have over 191,000 sq. ft. of office, warehouse,
and manufacturing area. Our manufacturing facility includes a CNC laser cutter, CNC
plasma cutter, turret punches, press brakes, shears and rolls. As we’ve grown our top
priority has remained the same, producing high quality products at competitive prices.

Gently Moving Nature’s Grains

Manufactured by

4200S 900W • Topeka, IN 46571
Phone (800) 593-8377 • Fax (260) 593-2486

www.honeyvillemetal.com

Rev. 10/14


Click to View FlipBook Version