EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA CONTENT • Welcoming Note Vice Chancellor • Welcoming Note Chief Editor • Preface • Certification, Collaborators/Clients, Fields of Testing/Services 1. Environment/Water Resources/Soils 1 2. Electrical/Electronic/Thermal/Radioactivity/Electromagnetic ompatibility (EMC) 3. Mechanical 4. Non-Destructive Testing (NDT) Materials 5. Information Technology/Software Engineering 6. Chemical/Toxicity 7. Food/Biological/Others 8. Index iii iv v vi 1 13 32 57 78 82 84 85
WELCOMING NOTE VICE CHANCELLOR I would like to sincerely thank all the Catalogue of Services Volume 1 taskforce team members for the hard work and commitment that you have shown, without which the publication of this catalogue would not have been possible. This successful publication reflects the team’s dedication to produce the first edition of Catalogue of Services Volume 1, Equipment for Consultation and Testing, Universiti Tun Hussein Onn Malaysia as a whole. This catalogue will give UTHM a competitive edge in the market to promote our services, consultation and expertise. From university to industry, the requirements of laboratories expertise and services are unique and diverse. Regardless whether an individual is working to the halls of academia, private institution or industry, conducting research or ensuring quality control, the availability of this catalogue will help him to get access to the services offered by this university and consequently optimise his work outcome. Therefore, I am optimistic that this initiative will drive UTHM forward towards establishing our institution as a Global Technopreneur University 2030. PROF. DATO’ Ir. Ts. Dr. RUZAIRI BIN ABDUL RAHIM VICE CHANCELLOR UNIVERSITI TUN HUSSIEN ONN MALAYSIA EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA
ASSOC. PROF. Dr. ANIKA ZAFIAH MOHD RUS CHIEF EDITOR CATALOGUE OF SERVICES VOLUME 1 EQUIPMENT FOR CONSULTATION AND TESTING WELCOMING NOTE CHIEF EDITOR It is my pleasure to announce the launching of Catalogue of Services Volume 1, Equipment for Consultation and Testing. This catalogue is a resourceful booklet that contains information on the equipment, services and consultations available at faculties, Centre of Excellence or Centre of Research and laboratories in Universiti Tun Hussein Onn Malaysia (UTHM). Regardless of your objectives and vision – from field work to laboratory, UTHM is with you along the way. We are capable of providing you with innovative state-of-the-art technologies, experienced engineers, scientists and experts that will enable you to see life from a new perspective. UTHM has extensive laboratory equipment, practical know-how, and technical experts that have enabled us to deliver high standard of services to unleashed your potential. It is our pleasure to provide solution-oriented approaches that will ensure a steady stream of experience in conducting research with suitable quality control. We are committed to continuously offering high standard of laboratory services and consultation with the highest levels of quality and performance, through our dedicated research and academia team. This catalogue is produced with the aspiration to provide great benefits to everyone. It is a source of references on services and equipment for consultation and testing available at UTHM. May this initiative help us to achieve great success continuously and consistently EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA
PREFACE As one of the leading technical universities in Malaysia, Universiti Tun Hussein Onn Malaysia (UTHM) offers a broad range of facilities and expertise and services, some of which are state-of-the-art technical equipment. The facilities and services provide an important link in the innovation process between basic idea (idea generation) to production (commercial or public domain). To be precise, the facilities and services at our faculties, Center of Research (CoR) and Center of Excellence (CoE) support fundamental research, process and product development ation services such as process definition and flow development • Independent use of facilities with assistance from experienced technicians Accessibility to facilities and services Everyone has equal rights to access the facilities and services offered by the faculties, CoEs and CoRs. The access is not limited to educational institutions or specific (public) research groups. In fact, we also offer practical solutions for small and start-ups businesses and that need either fundamental or advanced research and/or production. Access to and use of the facilities can be can be arranged through the appointed Person in Charge (PIC) at each faculty, CoR and CoE. Access to the the facilities can be granted in various ways namely: Rates / tariffs, priorities & rules There are different rates of charges imposed. Faculties, CoR or CoE distinguishes between a public rate for users from public research communities (e.g. universities, research institutes) and a private rate for all other users. In case of capacity restrictions, the rule of thumb is that academic users have priority over commercial users. • Direct access to the facilities for researchers of any active research project . • Direct access to the facilities using a dedicated operator from faculties, CoR and CoE or other relevant party • Access to the facilities and users are permitted to use their own trained and expert operator to run the equipment.. EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA
ISO certification and Collaborator EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA ISO certification FIELDS OF TESTING / SERVICES 02 Electrical / Electronic/ Thermal/ Radioactivity/ Electromagnetic Compatibility (EMC) 03 Mechanical 04 Non-Destructive Testing (NDT)/ Materials 05 Information Technology / Software Engineering 06 Chemical/Toxicity 07 Food/Biological/Others 01 Environment/ Wastewater/ Soils COLLABORATORS / CLIENTS proLIGHT Machining Center, AMMC UTHM UTHM COMMERCIAL LABORATORIES EMC, Mechanical & Chemical Canggih Delima RENGGAM CONCRETE WOMAN IN RAIL MALAYSIA t ARTIS ADVANCE RAIL TECH AND INDUSTRY SOLUTIONS
EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA 01. Environment/ Wastewater/ Soils
Equipments & Services: We have the following equipments ready to be used to conduct test on parameters related to water qualities. We also conduct the services to teach/consult on the lab courses for water quality parameters for other institution such as Politeknik We use UV-Vis Spectrophotometer - DR6000 HACH to measure colour, ammonia nitrogen, nitrate, nitrite, total nitrogen, total phosphorus, total iron, manganese, copper, zinc, lead, cadmium, chromium. chloride, free chlorine, total chlorine, fluoride, sulfate, sulfide, tannin & lignin (depending on its availability). Environmental Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT DR6000 HACH is use to measure Chemical Oxygen Demand (COD). While multimeter HQ440D HACH is use to measure the temperature, pH test, Dissolved Oxygen (DO), Biochemical Oxygen Demand (BOD). To measure salinity and turbidity, we use Pocket Pro Salinity HACH and Thermo Scientific TN-100, respectively. While to test on total solid, total suspended solid, total dissolved solid, we use vacuum pump with filtration set. Contact Person Dr Hartini binti Kasmin 07-4534464 [email protected] En Erwin bin Eddy, 010-4604990 [email protected] Fax: : 07-4536588 http://fkaab.uthm.edu.my/facilities.html#labs Universiti Tun Hussein Onn Malaysia EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA DR6000 HACH/ DRB200 HACH BOD & COD EXPERIMENTAL 1
Wastewater Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT Contact Person Dr Hartini binti Kasmin 07-4534464 [email protected] Pn Hazliana binti Padalilah 013-7707866 [email protected] Fax: : 07-4536588 http://fkaab.uthm.edu.my/facilities.html#labs Universiti Tun Hussein Onn Malaysia MICROSCOPES BACTERIA INCUBATOR Microbiology Experiments (BSL 1 only) Equipments ready to be used to conduct basic experiments related to microbiology, and available ONLY for Biosafety Level (BSL) 1. EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA 2
Equipments & Services: Ion Chromatography (IC) is used to determine anions in liquid (water and waste water) and solid samples (soil). There are seven anion that can be tested such as: F- , Cl- , NO2- , NO3- , Br- , PO4- , SO4 Total Organic Carbon Analyzer (TOC), brand/model: Shimadzu/TOC-V is used to determine the total organic, total inorganic and total nitrogen in liquid and solid (in powder form) sample Contact Person Chm Fazlyana binti Mustafa 07-4564401/4403 [email protected] Chm Nadiah binti Khaled 07-4564401/4403 [email protected] En Mohd Bahtiar bin Mohd Basri [email protected] Fax: : 07-4536588 http://fkaab.uthm.edu.my/facilities.html#labs Universiti Tun Hussein Onn Malaysia EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Environmental Analysis Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT ION CHROMATOGRAPHY (IC) TOTAL ORGANIC CARBON ANALYZER (TOC) 3
Environmental Analysis Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT Contact Person Chm Fazlyana binti Mustafa 07-4564401/4403 [email protected] Chm Nadiah binti Khaled 07-4564401/4403 [email protected] En Mohd Bahtiar bin Mohd Basri [email protected] Fax: : 07-4536588 http://fkaab.uthm.edu.my/facilities.html#labs Universiti Tun Hussein Onn Malaysia EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Inductively Coupled Plasma-Mass Spectrometer (ICP-MS) is used to determine the concentration of multi elements in liquid sample in unit of part per bil�lion (ppb). The elements that can be tested are : Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cs, Cu, Fe, Ga, In, K, Li, Mg, Mn, Ni, Pb, Rb, Se, Na, Ag, Sr, Tl, V, U, Zn Equipments & Services: Atomic Absorption Spectroscopy (AAS) is used to determine the concentration of single elements in liquid sample (water, waste water) in unit of part per million (ppm). The elements that can be tested are: Cr, Na, Fe, Mg, Pb, Mn, Li, Cd, Ca, Cu, Zn, K, Ni ATOMIC ABSORPTION SPECTROSCOPY (AAS) INDUCTIVELY COUPLED PLASMA-MASS SPECTROMETER (ICP-MS) 4
X-Ray Fluorescence (XRF) is used to: • To perform elemental analysis in all kind of samples; (liquids, solids or loose powders) • Sample types: solids (glass, ceramic, metal, rock, coal), liquids (petrol, oil, paint, solutions, blood or even wine) and loose powder. Environmental Analysis Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT Equipments & Services: Mercury Analyzer is used to analyze the total mercury of any liquid and solid samples. This instrument capable to analyse total mercury by both Thermal decomposition - Gold amalgamation - CVAAS technique and Reducing vaporization - CVAAS technique in a single platform The elements that can be tested are: a) Standardless method Na, Mg, Al, Si, P, S, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Br, Rb, Sr, Y, Zr, Nb, Mo, Ru, Rh, Pd, Ag, Cd, In, Sn, Sb, I, Cs, Ba, La, Hf, Ta, W, Re, Os, Ir, Pt, Au, Hg, Tl, Pb, Bi, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Th, U b) Quant-T method Sc, TiO2, V, Cr, MnO, Fe2O3, Co, Ni, Cu, Zn, Ga, As, Rb, Sr, Y, Zr, Nb, Mo, Sn, Sb, Cs, Ba, La, Pb, Ce, Th, U Contact Person Chm Fazlyana binti Mustafa 07-4564401/4403 [email protected] Chm Nadiah binti Khaled 07-4564401/4403 [email protected] En Mohd Bahtiar bin Mohd Basri [email protected] Fax: : 07-4536588 http://fkaab.uthm.edu.my/facilities.html#labs Universiti Tun Hussein Onn Malaysia MERCURY ANALYZER EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA X-RAY FLUORESCENCE (XRF) 5
Environmental Analysis Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT Contact Person Chm Fazlyana binti Mustafa 07-4564401/4403 [email protected] Chm Nadiah binti Khaled 07-4564401/4403 [email protected] En Mohd Bahtiar bin Mohd Basri [email protected] Fax: : 07-4536588 http://fkaab.uthm.edu.my/facilities.html#labs Universiti Tun Hussein Onn Malaysia Equipments & Services: SCANNING ELECTRON MICROSCOPE (SEM) EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA PARTICLE SIZE ANALYZER (PSA) Scanning Electron Microscope (SEM) is used to capture the image of dry and wet sample by scanning it with a beam of electrons in a raster scan pattern. Types of sample including hydrated specimens, non conductors and conductors. Environmental capability that has extended variable pressure or extended low vacuum capability up to the pressure of 3000Pa for the imaging of various environmental materials. Particle Size Analyzer (PSA) is to determine the particle sizes of all types of samples using wet technique 6
Geotechnical Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT Contact Person: Ts. Mohd Fairus Bin Yusof +6010-4058077 [email protected] Siti Fadzilah Bt Kasno +6013-3789414 [email protected] Geotechnical Engineering Laboratory Faculty of Civil Engineering and Built Environment fkaab.uthm.edu.my/facilities.html#labs ATTERBERG LIMIT TEST (LIQUID LIMIT & PLASTIC LIMIT) EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Moisture Content Test is the determination of the moisture content of a soil as a percentage of its oven-dried weight. The method may be applied to fine, medium and coarse grained soils for particle sizes from 2 mm to >10 mm. Atterberg Limits Tests establish the moisture contents at which fine-grained clay and silt soils transition between various states (soil, semi-solid, plastic, and liquid), which is an important step in determining the soil’s strength, consistency and behavior. Equipments & Services: MOISTURE CONTENT TEST 7
Geotechnical Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT Contact Person: Ts. Mohd Fairus Bin Yusof +6010-4058077 [email protected] Siti Fadzilah Bt Kasno +6013-3789414 [email protected] Geotechnical Engineering Laboratory Faculty of Civil Engineering and Built Environment fkaab.uthm.edu.my/facilities.html#labs Particle size distribution (Dry Sieve & Hydrometer Analysis) Sieve analysis is a technique used for determining the size of particles in essential distributions such as the number of different size particles are responsible for the surface reaction, solubility, and flowability. For dry non-agglomerated particles, sieve analysis remains a cost-effective and precise measuring instrument. Separating particles by size is called sieving Specific gravity is a measure of the actual particles which make up the soil mass and is defined as the ratio of the mass of the particles to the mass of the water they displace. A knowledge of the particle density is essential in relation to other soil tests. It is used when calculating porosity and voids ratio and is particularly important when compaction and consolidation properties are being investigated. The majority of apparatus used for the various tests is general laboratory equipment. PARTICLE SIZE DISTRIBUTION (DRY SIEVE & HYDROMETER ANALYSIS) EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: SPECIFIC GRAVITY TEST 8
CALIFORNIA BEARING RATIO (CBR) COMPACTION TEST Geotechnical Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT Contact Person: Ts. Mohd Fairus Bin Yusof +6010-4058077 [email protected] Siti Fadzilah Bt Kasno +6013-3789414 [email protected] Geotechnical Engineering Laboratory Faculty of Civil Engineering and Built Environment fkaab.uthm.edu.my/facilities.html#labs California bearing ratio test is basically a load test that is performed on the soil surface to determine its CBR value. The California Bearing Ratio or CBR test is performed to evaluate the strength of soil subgrades and base course materials. Those who design highways, airport runways and taxiways, parking lots, and other pavements rely on CBR test values when selecting pavement and base thicknesses. Compaction test is used to establish the relationship between dry density and moisture content for a given degree of compactive effort and determine the value of maximum dry density and optimum moisture content of the soil. The results of a compaction test can be used when soil is used as a sub-base for a road, railway or airfield runway and earth dam. The test is conducted according to BS1377: Part 4:1990-3.3 (for standard proctor test) and BS1377 Part 4:1990-3.5 (for modified proctor test). EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: 9
Geotechnical Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT One-Dimensional Consolidation Test: Consolidation test is used to determine the rate and magnitude of settlement in soils. The settlement values obtained by this test are due to primary consolidation only, which is 90% of the total consolidation. The results of consolidation test are very much helpful in the design of foundations and embankments on soft soil. Sand Replacement Test The sand replacement method is one of the common field density tests used to determine the in situ dry density of natural or compacted soil. In-situ density is widely used to control the field compaction of earthworks and pavement layers. Contact Person: Ts. Mohd Fairus Bin Yusof +6010-4058077 [email protected] Siti Fadzilah Bt Kasno +6013-3789414 [email protected] Geotechnical Engineering Laboratory Faculty of Civil Engineering and Built Environment fkaab.uthm.edu.my/facilities.html#labs ONE-DIMENSIONAL CONSOLIDATION TEST EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: SAND REPLACEMENT TEST 10
Geotechnical Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT Contact Person: Ts. Mohd Fairus Bin Yusof +6010-4058077 [email protected] Siti Fadzilah Bt Kasno +6013-3789414 [email protected] Geotechnical Engineering Laboratory Faculty of Civil Engineering and Built Environment fkaab.uthm.edu.my/facilities.html#labs Dynamic Cone Penetration Test (DCP): The dynamic cone penetration test is a test carried out to find the resistance value of the cone against the soil in determine different mechanical properties of soil such as strength, bearing capacity, and so on. Mackintosh/JKR Probe Test: The Mackintosh/JKR probe test is one of the simple methods to predict the bearing capacity of soil, especially soft soil. The total number of blows required to penetrate a distance of 30 cm is recorded and used as a measure of the bearing capacity of cohesive soil. DYNAMIC CONE PENETRATION TEST (DCP) EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: MACKINTOSH/JKR PROBE 11
Geotechnical Engineering Laboratory FACULTY OF CIVIL ENGINEERING & BUILT ENVIRONMENT Contact Person: Ts. Mohd Fairus Bin Yusof +6010-4058077 [email protected] Siti Fadzilah Bt Kasno +6013-3789414 [email protected] Geotechnical Engineering Laboratory Faculty of Civil Engineering and Built Environment fkaab.uthm.edu.my/facilities.html#labs Slake Durability Test is a described and measures the resistance of a rock sample to weakening and disintegration resulting from a standard cycle of drying and wetting. The main purpose of this ‘slake-durability test’ is to evaluate the weathering resistance of shales, mudstones, siltstones and other clay-bearing rocks. Schmidt Rebound Hammer test is a Non-destructive testing method of concrete to find out the compressive strength of concrete using the Rebound Hammer as per IS : 13311 : 1992 (PART– 02). This test provides a convenient and rapid indication. pH Test is an electric device used to measure hydrogen-ion activity (acidity or alkalinity) in solution. Fundamentally, a pH meter consists of a voltmeter attached to a pH-responsive electrode and a reference (unvarying) electrode. POINT LOAD TEST SCHMIDT REBOUND HAMMER TEST SLAKE DURABILITY TEST EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: pH TEST 12
EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Electrical / Electronic/Thermal/ Radioactivity/ 02. Electromagnetic Compatibility (EMC)
AFM HITACHI (CONTACT) Microelectronics and Nanotechnology-Shamsuddin Institute For Integrated Engineering If you have electrical conductive or non�conductive thin films or powder that you would like to be characterized using our equipment, please do not hesitate to contact us. All our equipment are under one-roof. You will receive results that reveal to you the surface microstructures, chemical elements, crystalline lattice, wettability, chemical functional groups and porosity of your materials. Type of test / services offered: Imaging, measuring and manipulating matter at the nano scale. Type of sample: Thin films Type of test / services offered: Imaging, measuring and manipulating matter at the nano scale. Type of sample: Thin films (prefer thin films deposited using thermal evaporator / sputtering) Contact Person Mrs. Faezahana Mohkhter Assoc. Prof. Ir. Dr. Soon Chin Fhong Institute for Integrated Engineering, Tel: +607-4538611 http://mint.uthm.edu.my/ Email: [email protected] EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: AFM PARK SYSTEM (NON CONTACT) 13
Microelectronics and Nanotechnology-Shamsuddin Institute For Integrated Engineering If you have electrical conductive or non-conductive thin films or powder that you would like to be characterized using our equipment, please do not hesitate to contact us. All our equipment are under one-roof. You will receive results that reveal to you the surface microstructures, chemical elements, crystalline lattice, wettability, chemical functional groups and porosity of your materials. Type of test / services offered: Inspection system to examine fine details within nanometre-level resolution. Type of sample: Thin films and powder Type of test / services offered: Elemental analysis. Type of sample: Thin films and powder FE-SEM EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA EDX Equipments & Services: Contact Person Mrs. Faezahana Mohkhter Email: [email protected] Assoc. Prof. Ir. Dr. Soon Chin Fhong Institute for Integrated Engineering, Tel: +607-4538611 http://mint.uthm.edu.my/ 14
Microelectronics and Nanotechnology-Shamsuddin Institute For Integrated Engineering Contact Person Mrs. Faezahana Mohkhter Email: [email protected] Assoc. Prof. Ir. Dr. Soon Chin Fhong Institute for Integrated Engineering, Tel: +607-4538611 http://mint.uthm.edu.my/ Type of test / services offered: Measure sheet resistance, metal film thickness and resistivity measurement. Type of sample: Thin films Type of test / services offered: Measure DC field Hall voltage, resistivity, carrier coefficient, carrier mobility, magneto-resistance, carrier type carrier density. Type of sample: Thin films HALL EFFECT ANALYZER EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: 4 POINT PROBE 15
Microelectronics and Nanotechnology-Shamsuddin Institute For Integrated Engineering Type of test / services offered: Impedance analysis. Type of sample: Thin film or devices Type of test / services offered: Measurement capabilities. Type of sample: Thin film or devices Contact Person Mrs. Faezahana Mohkhter Email: [email protected] Assoc. Prof. Ir. Dr. Soon Chin Fhong Institute for Integrated Engineering, Tel: +607-4538611 http://mint.uthm.edu.my/ SEMICONDUCTOR PARAMETRIC ANALYZER EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA IMPEDANCE ANALYZER (EIS AND POTENTIOSTAT) Equipments & Services: 16
XRD RAMAN SPECTROSCOPY UV-VIS SURFACE PROFILER Microelectronics and Nanotechnology-Shamsuddin Institute For Integrated Engineering Type of test / services offered: For phase identification & percent crystallinity material. Type of sample: Thin film Type of test / services offered: Measure the transmittance and absorbance. Type of sample: Thin films and liquid Type of test / services offered: To observe vibrational, rotational and other low frequency modes in a system. Type of sample: Thin film and powder Type of test / services offered: Measure thickness of thin films. Type of sample: Thin film Materials Physico-chemical Analysis Contact Person Mrs. Faezahana Mohkhter Email: [email protected] Assoc. Prof. Ir. Dr. Soon Chin Fhong Institute for Integrated Engineering, Tel: +607-4538611 http://mint.uthm.edu.my/ EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: 17
Microelectronics and Nanotechnology-Shamsuddin Institute For Integrated Engineering Materials Physical Test Type of test / services offered: Measure Young’s modulus, hardness, fracture toughness and other mechanical properties via nanoindentation. Type of sample: Thin film Type of test / services offered: Measure surface area and porosity Type of sample: Powder BRUNAUER, EMMETT AND TELLER (BET) EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Contact Person Mrs. Faezahana Mohkhter Email: [email protected] Assoc. Prof. Ir. Dr. Soon Chin Fhong Institute for Integrated Engineering, Tel: +607-4538611 http://mint.uthm.edu.my/ NANOINDENTER Equipments & Services: 18
Microelectronics and Nanotechnology-Shamsuddin Institute For Integrated Engineering RF/DC SPUTTER EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: Thin film Deposition Type of test / services offered: Deposit thin films of various metal and oxide materials. Materials Physical Test Type of test / services offered: Quantitative measure of a solid by a liquid. Type of sample: Thin film Contact Person Mrs. Faezahana Mohkhter Email: [email protected] Assoc. Prof. Ir. Dr. Soon Chin Fhong Institute for Integrated Engineering, Tel: +607-4538611 http://mint.uthm.edu.my/ CONTACT ANGLE METAL THIN FILM SPUTTERING 19
High Voltage Laboratory FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING Contact Person En. Uzli Yusof 0137062609 [email protected] Dr. Ir. Mohd Fairouz bin Mohd Yousof 0167664223 [email protected] Universiti Tun Hussein Onn Malaysia https://fkee.uthm.edu.my TERCO High Voltage Laboratory is based on a system of components made with the highest precision and can be used to build systems both for teaching and research as well as for industrial routine and type tests. The assembly of a required Test Set Up is easily done and requires no special tools. The system gives values with high accuracy and can even be used for calibration purpose. HIGH VOTAGE MODULE TRAINING SET AC Voltage - Test Set-up DC Voltage - Test Set-up Impulse Voltage - Test Set-up EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: 20
Microcontroller Systems Laboratory FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING The Virtex®-7 FPGA VC707 Evaluation Kit is a full-featured, highly-flexible, high-speed serial base platform using the Virtex-7 XC7VX485T-2FFG1761C and includes basic components of hardware, design tools, IP, and pre-verified reference designs for system designs that demand high-performance, serial connectivity and advanced memory interfacing. The included pre-verified reference designs and industry-standard FPGA Mezzanine Connectors (FMC) allow scaling and customization with daughter cards. Contact persons En. K.Kovalan A/L Kanawathi 0137712084 [email protected] Ts. Wan Nur Hafsha Bt. Wan Khairuddin 0124341317 [email protected] Universiti Tun Hussein Onn Malaysia https://fkee.uthm.edu.my VIRTEX®-7 FPGA VC707 EVALUATION KIT EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: 21
Microcontroller Systems Laboratory FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING The Zynq®-7000 SoC ZC702 Evaluation Kit includes all the basic components of hardware, design tools, IP, and pre-verified reference designs including a targeted design, enabling a complete embedded processing platform. The included pre-verified reference designs and industry-standard FPGA Mezzanine Connectors (FMC) allow scaling and customization with daughter cards. ZYNQ®-7000 SOC ZC702 EVALUATION KIT EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Contact persons En. K.Kovalan A/L Kanawathi 0137712084 [email protected] Ts. Wan Nur Hafsha Bt. Wan Khairuddin 0124341317 [email protected] Universiti Tun Hussein Onn Malaysia https://fkee.uthm.edu.my Equipments & Services: 22
Advanced Printed Circuit Board Laboratory FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING Type of Computerized Numerical Control (CNC) for Printed Circuit Board (PCB) drilling machines in industrial operations. It takes a long time to find optimal tour for large number of nodes (up to thousands). To achieve more effective results, optimization systems approach is required to be equipped in drilling machine. Euclidean Traveling Salesman Problem (TSP) is one of optimization method that gives fast near optimal solution for the drilling machine movement using novel friendly techniques. Contact Person En. Mahmod bin Munajat - 0197766756 [email protected] En. Mohd Fadli bin Mohd Shaib 0192722209 [email protected] Universiti Tun Hussein Onn Malaysia https://fkee.uthm.edu.my COMPUTER CONTROLLED DRILLING (CCD) EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: 23
EMONA TIMS DIGITAL COMMUNICATION TRAINER Digital Communication Laboratory FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING EMONA TIMS (Telecommunication Instructional Modelling System), is a flexible and versatile communications trainer that incorporates all of the instruments needed to quickly and easily carry out every communications laboratory experiment required in a range of courses, from technical college to university level. Contact Person En. Sharifunazri bin Johadi 019-7600816 [email protected] En. Ezri bin Mohd 017-5480273 [email protected] Universiti Tun Hussein Onn Malaysia https://fkee.uthm.edu.my EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA 24 Equipments & Services:
Digital Communication Laboratory FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING GW GRG-450B ANALOG RF SIGNAL GENERATOR GW INSTEK GPS-2303 DC POWER SUPPLY R&S FSH20 HANDHELD SPECTRUM ANALYZER METERMAN TRUE RMS 34XR DIGITAL MULTIMETER GW GRG-450B, GW Analog RF Signal Generator is a device that can generate radio frequencies analogously ranging from 100kHz to 150MHz. It is capable of producing a stable signal especially in conditions that require low radio frequencies. R&S Handheld Spectrum Analyzer , The R&S FSH20 handheld spectrum analyzer is a spectrum analyzer, network analyzer, cable and antenna analyzer, interference hunting analyzer and power meter. The feature-packed analyzer makes field measurements simple and efficient. The rugged design and built-in handle makes it ideal for any outdoor tasks. It can measured up to 20GHz. METERMAN TRUE RMS 34XR , The Meterman Digital Multimeter is a True rms autoranging handheld digital multimeter for measuring or testing DC and AC voltage, DC and AC current, Resistance, Frequency, Dutycycle, Capacitance, Diodes and continuity. Its also can measure temperature by using the special probe. This multimeter can measured voltage up to 1000V and 10Amp current. The additional features include with this multimeter are MIN MAX, HOLD, Backlight and Range Lock. GW Instek GPS-2303 , The GW Instek DC Power Supply has 2 channel, 180 to 200W output, linear DC power supplies. Overload and reverse polarity protection, and an output on/off switch keep the DC power supply and their load safe from unexpected conditions. A High regulation (0.01%+3mV) and low ripple/noise (< 1mVrms, 5Hz~1MHz) are maintained for channel 1 and 2 in constant voltage mode. This DC power supply is an ideal solution for lightweight, inexpensive bench-top or portable applications requiring high regulation and multiple outputs. EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: Contact Person En. Sharifunazri bin Johadi 019-7600816 [email protected] En. Ezri bin Mohd 017-5480273 [email protected] Universiti Tun Hussein Onn Malaysia https://fkee.uthm.edu.my 25
LOW VOLTAGE SWITCHBOARD (LVSB) WITH SCADA SYSTEM Electrical Power Technology Engineering We provide training for Low Voltage Switchboard (LVSB) with SCADA system for academic and industry. This LVSB system is normally been used for Residential, Commercial & Industrial as power supply distribution. Contact Person Dr Nor Aira Binti Zambri 017-3889300 [email protected] En Amarudeen B Amir 017-7443325 [email protected] Department of Electrical Technology Engineering Faculty of Engineering Technology Universiti Tun Hussein Onn Malaysia https://ftk.uthm.edu.my EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: Department of Electrical Technology Engineering FACULTY OF ENGINEERING TECHNOLOGY 26
Electrical Power Technology Engineering We provide training for Renewable Energy Technology such as Hydro, Solar, Wind Turbine and also Hybrid System for academic and industry. This RE equipment is normally been used for actual application usage as RE power supply. Contact Person Ts Dr Farahiyah Bt Mustafa 012-5609318 [email protected] En Muhammad Helmi B Khamis 013-7121455 [email protected] Department of Electrical Technology Engineering Faculty of Engineering Technology Universiti Tun Hussein Onn Malaysia https://ftk.uthm.edu.my RENEWABLE ENERGY TECHNOLOGY (RET) EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Department of Electrical Technology Engineering FACULTY OF ENGINEERING TECHNOLOGY 27 Equipments & Services:
Industrial Automation Technology Engineering We provide training for Industrial Control Technology such as Ablelogic PLC Trainer, Omron PLC, Festo System, Conveyor System, Handling & Processing System, Handling & Buffer Station, 3 DOF Crane System, CNC Mill 55 Station, SMC Pneumatic System, Robot Assembly Station and Mobile Robot Station (Robotino) for academic and industry. This RE equipment is normally been used for actual application usage as RE power supply. Contact Person Ts Dr Amirul Shafiq B Sadun 011-16602509 [email protected] En Fadzil B Esa 010-7931910 [email protected] Department of Electrical Technology Engineering Faculty of Engineering Technology Universiti Tun Hussein Onn Malaysia https://ftk.uthm.edu.my INDUSTRIAL CONTROL TECHNOLOGY (ICT®) EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: Department of Electrical Technology Engineering FACULTY OF ENGINEERING TECHNOLOGY 28
Department of Electrical Technology Engineering FACULTY OF ENGINEERING TECHNOLOGY Communication & Computer Technology Engineering We provide training for designing and fabricating of Printed Circuit Board (PCB) for electronic circuit board projects for academic and industry. This PCB equipment is normally been used in Electronic Industry nowadays. Contact Person Ts Mohd Fadly B Abd Razak 019-7187118 [email protected] En Muhammad Helmi B Khamis 013-7121455 [email protected] Department of Electrical Technology Engineering Faculty of Engineering Technology Universiti Tun Hussein Onn Malaysia https://ftk.uthm.edu.my EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA PRINTED CIRCUIT BOARD TECHNOLOGY (PCBT) 29 Equipments & Services:
I-CoE REL Industry Centre of Excellence for Railway Automated Fare Collection (AFC) Railway Laboratory We provide training for railway Automated Fare Collection (AFC) system for academic and industry. This AFC system is currently been used for Mass Rapid Transport (MRT) System in Sungai Contact Person Dr Huda A Majid 013-7025675 [email protected] Dr Joewono Prasetijo 011-17743911 [email protected] Industry Centre of Excellence in Railway (I-CoE REL) Faculty of Engineering Technology Universiti Tun Hussein Onn Malaysia AUTOMATED FARE COLLECTION (AFC) RAILWAY LABORATORY EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA 30 Equipments & Services:
Contact Person PM Dr. Samsul Haimi bin Dahlan 012-7664124 [email protected] PM Dr. Xavier Ngu Toh Ik 010-8888341 [email protected] PM Dr. Yee See Khee [email protected] IResearch Centre for Applied Electromagnetic (EMC) EMCenter, F4-001-01 Universiti Tun Hussein Onn Malaysia EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Research Centre for Applied Electromagnetic EMCenter Radiated Emission Radiated Immunity Conducted Emission Conducted Immunity Electrostatics Discharge Electrical Fast Transients Surge Injected Current Power-frequency Magnetic Fields High-precision Dielectric Parameter Measurements with Dielectric Assessment Kit (DAK) Magnetic Field Measurement using Linear Data AcquisitionWheel (LINDA) GEO Earth Ground Tester Shielding Effectiveness High-precision Dielectric Parameter Measurements 31 Equipments & Services:
EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA 03. Mechanical
Advanced Manufacturing And Materials Center Institute For Integrated Engineering This series of laser engraving cutting machine adopts high precision drive part, utilizes three original straight line guide tracks in axis X and Y. Uses four pieces of specialized laser lens, and enables the machine speed and accuracy incisive. This series of laser cutting machine is an ideal choice for professional user. Applicable Materials Wood, paper, leather, cloth, organic glass, acrylic, woolens, plastic, rubber ceramic tile, bowlder, bamboo, cloth, fabric toy, furniture, reticule, bag, leather, engraving cutting, architecture modeling, advertising, decoration, rubber, acrylic product, middle density, board etc non metal sheet precision cutting. Contact Person Mr. Mokhtar Bin A Hamid 0127508281 [email protected] Institute for Integrated Engineering (I2E) Advanced Manufacturing and Materials Center (AMMC) Universiti Tun Hussein Onn Malaysia https://ammc.uthm.edu.my ENGRAVING CUTTING MACHINE EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA 32 Equipments & Services:
Contact Person Prof. Dr. Amri Bin Lajis 012-7282205 [email protected] Mr. An’amur Rahman bin Yunos 0137448344 Universiti Tun Hussein Onn Malaysia https://ammc.uthm.edu.my Used to extrude compacted aluminium chip billet, to produce extruded sample To form or fabricate metal plate. Can be used recycle materials such as aluminium chip Used as the pre-processing process to produce billet for hot extrusion HOT EXTRUSION MACHINE / HOT PRESS FORGING / COLD PRESS FORGING EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Advanced Manufacturing And Materials Center Institute For Integrated Engineering 33 Equipments & Services:
Contact Person Prof Dr. Yusri Bin Yusof 0197150778 [email protected] Mr. An’amur Rahman bin Yunos 0137448344 Universiti Tun Hussein Onn Malaysia https://ammc.uthm.edu.my The proLIGHT Machining Center is a three-axis tabletop milling machine, which you can run directly from your personal computer. The proLIGHT Control Program, which you load onto your computer, accepts standard EIA RS-274D G&M codes that CNC machine tools recognize. The proLIGHT Machining Center’s most notable features include: A one horsepower permanent magnet spindle motor An R8 industry-standard spindle taper Computer controlled spindle speeds from 200 to 5,000 RPM (500 to 10,000 RPM optional) Rapid traverse rates up to 50 ipm on all axes EIA RS-274D standard G&M code programming Multiple tool programming Feed rate and spindle speed override functions A built-in full-screen NC program editor. An on-line help utility Simultaneous or simulated, solid or centerline graphic verification. THE PROLIGHT MACHINING CENTER EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Equipments & Services: Advanced Manufacturing And Materials Center Institute For Integrated Engineering 34
Polymer Laboratory FACULTY OF MECHANICAL AND MANUFACTURING NISSEI NP 7 PLASTIC INJECTION MOLDING MACHINE Shimadzu Universal Testing Machine • Tensile, Flexural and Compress Test • Max 10kn Nissei NP 7 Pastic Injection Molding Machine • For ISO 178 sample • For ISO 527 sample Brabender Plastograph Mixer • Measuring Mixers for Laboratory and Simulation • Simulate Production Realistically on a laboratory Scale Contact Person Dr. Hamidon Salleh [email protected] Shahrul Mahadi b. Samsudin [email protected] Tel : 07-4538458 Fax : 07-4536080 Universiti Tun Hussein Onn Malaysia https://fkmp.uthm.edu.my/ EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA BRABENDER PLASTOGRAPH MIXER SHIMADZU UNIVERSAL TESTING MACHINE 35 Equipments & Services:
FOURIER TRANSFORM INFRARED SPECTROSCOPY (FTIR) Contact Person Dr. Hamidon Salleh [email protected] Fazlannuddin Hanur Bin Harith [email protected] Tel : 07-4538458 Fax : 07-4536080 Universiti Tun Hussein Onn Malaysia https://fkmp.uthm.edu.my/ FTIR capable to produce the results of the samples depends on the requirement of user. Top: To determine the groups by using peak detection. Below: Comparison the similarity of sample with other samples. EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Properties Test Fourier Transform Infrared Fourier Transform Infrared also known as FTIR is to identify chemical bonds in a molecule by producing an infrared absorption spectrum. The analytical instrument effective for detecting functional groups and characterizing covalent bonding information. Two methods, Attenuated Total Reflectance (ATR) and kBr powder techniques are applied by this instrument. Equipments & Services: Polymer Laboratory FACULTY OF MECHANICAL AND MANUFACTURING 36
Vibration Laboratory FACULTY OF MECHANICAL AND MANUFACTURING IMPEDANCE TUBE SYSTEM FOR SOUND ABSORPTION AND TRANSMISSION LOSS MEASUREMENT Sample Ø 100mm and 28mm. Maximum thickness 250mm. Frequency range 100Hz – 8000Hz ACOUSTIC MATERIAL TESTING Sound Impedance Tube We have the following equipment used to conduct sound testing on acoustic materials according to international standard test methods. Sound Absorption Coefficient and Sound Impedance Test Accordance to ISO 10534-2:1998 (GB/T 18696.2-2002) or ASTM E 1050-08 Sound absorption coefficient is used to evaluate the sound absorption efficiency of materials. It is the ratio of absorbed energy to incident energy and is represented by α. Transmission loss of sound is a measurement of the reduction in sound level of a sound source as it passes through an acoustic material. It is the number of decibels that are stopped by the acoustical material and is measured at different frequencies. Contact Person Dr. Hamidon Salleh [email protected] Md. Zainorin Kasron [email protected] Tel : 07-4538458 Fax : 07-4536080 Universiti Tun Hussein Onn Malaysia https://fkmp.uthm.edu.my/ EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA 37 Equipments & Services:
Ceramic Laboratory FACULTY OF MECHANICAL AND MANUFACTURING SIMULTANEOUS THERMAL ANALYSIS The instrument is running in high temperature. The Analysis Of Heat Flow And Specific Heat For Fish Bone By Using Differential Thermal Analysis (DTA) Techniques. Properties Test Simultaneous Thermal Analysis Also known as STA, the instrument to determine thermal properties in certain temperature condition. Consist two techniques applied which are Thermogravimetric Analysis (TGA) and Differential Scanning Calorimeter (DSC) and able to test simultaneously. The range of the temperature from room temperature (RT) into 1600 deg. C. Thus, this instrument is suitable for ceramic, metal and composite materials. Contact Person Dr. Hamidon Salleh [email protected] Fazlannuddin Hanur Bin Harith [email protected] Tel : 07-4538458 Fax : 07-4536080 Universiti Tun Hussein Onn Malaysia https://fkmp.uthm.edu.my/ EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA The Analysis Of Weight Changes And Decomposition For Fish Bone By Using Thermogravimetric Analysis (TGA) Techniques. 38 Equipments & Services:
Ceramic Laboratory FACULTY OF MECHANICAL AND MANUFACTURING VICKERS MICROHARDNESS TESTER Vickers Indenter indent a specimen by using microhardness tester. The example of the results. Top: The image and the result of the sample. Below: A statistical data after test been carried out. Properties Test Vickers Microhardness Tester To determine the hardness of material, microhardness vickers is a low range load indentation from lowest 10 g up into 2 kgs. It’s suitable for metal, glass, thin film and coating sample without damaged a substrate. The sample suggested in fine surface for better result. Contact Person Dr. Hamidon Salleh [email protected] Fazlannuddin Hanur Bin Harith [email protected] Tel : 07-4538458 Fax : 07-4536080 Universiti Tun Hussein Onn Malaysia https://fkmp.uthm.edu.my/ EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA 39 Equipments & Services:
Element Weight% Atomic% O K 49.51 64.42 Na K 1.53 1.38 Al K 15.88 12.25 Si K 7.04 20.04 K K 1.78 0.95 Nb L 4.26 0.95 Totals 100.00 Materials Characterization Laboratory FACULTY OF MECHANICAL AND MANUFACTURING SCANNING ELECTRON MICROSCOPE (SEM) Scanning Electron Microscope, HITACHI SU1510 The Scanning Electron Microscope (SEM) is an instrument that scans a sample surface with a finely converged electron beam in a vacuum, detects the information (signals) produced at that time from the sample, and presents an enlarged image of the sample surface on the monitor screen. X-ray detector have been mounted to the SEM for conducting elemental analysis. So the SEM is also applicable as an X-ray analyzer for determining what elements are included in the sample. Type of test: • Observing sample structure within micrometer resolution. • Elemental analysis Type of sample: • Dry specimen Contact Person Dr. Hamidon Salleh [email protected] Anuar Bin Ismail [email protected] Tel : 07-4538458 Fax : 07-4536080 Universiti Tun Hussein Onn Malaysia https://fkmp.uthm.edu.my/ EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA 40 Equipments & Services:
X-RAY DIFFRACTION (XRD) X-ray Diffraction (XRD), Bruker D8 Advance X-Ray Diffraction (XRD) is a nondestructive technique for characterizing crystalline materials. Type of test: • To determined phase analysis. Type of sample: • Fine powder ≤ 63 μm Contact Person Dr. Hamidon Salleh [email protected] Anuar Bin Ismail [email protected] Tel : 07-4537812 Fax : 07-4536080 Universiti Tun Hussein Onn Malaysia https://fkmp.uthm.edu.my/ EQUIPMENT FOR CONSULTATION AND TESTING UNIVERSITI TUN HUSSEION ONN MALAYSIA Materials Characterization Laboratory FACULTY OF MECHANICAL AND MANUFACTURING 41 Equipments & Services: