How to Use Grout Finishing Tools for Tiles Cleaning?

How to Use Grout Finishing Tools for Tiles Cleaning?

Grout finishing tools help give tiles a perfect finish on the tiles. And this helps to fill all the gaps
present between the tiles and remove all the flakes. Grouting is essential for keeping your tiles neat.
If you want to do grouting, you need to use the grout finishing tool that helps you do the task easier.
Here are some of the tips that help to do grouting easily.

Prepare Joints
First, you need to clean the joints between the tiles. It would help if you scraped anything present
between the tiles. Do it with a stiff knife and start by vacuuming for tiles so that there is no dirt
and debris left on the tiles.
Now, apply the tape to trim tiles from the edges. Apply tape will help you to grout in the perfect
direction. Lastly, push the entire muck back between the tile’s joints.

Mix Grout till It Gets Powder Free
Now take the grout and fill the margin trowel till all the powder gets dissolved. Make sure to roll the
bucket frequently when you are mixing the grout. You can scrape the mixture at the bottom to
ensure that it is adequately mixed. Keep mixing until all the powder is mixed and achieve a paste-
like consistency.

Load The Grout Float and Spread
Now, drag a small amount of grout on the slope and then scoop it in a downward direction. Push the
float tightly against the bucket side and take a dollop of the grout. Start spreading the grout
diagonally, and make sure to grout the wall first and then upward.

Clean Excess Grout
Once you finish grouting, remove all the bulk grout in a twisting motion. And This will help to
distribute the grout efficiently and prevent floating of the grout from the edges. Hold the float at a
sharp angle and scrape excess grout from the tiles.

Sponge Grouted Surfaces
Last but not least, when you did grouting. Sponge the surface diagonally across the tiles. Make sure
to rinse the sponge before you use it on the tiles. Use your index finger to depress the sponge but
not push it harder. Sponging helps to give a perfect finish.

Buff Out the Haze
When grout dried, buff out all the haze with a cotton towel. Choose to have a lint-free microfiber
towel as it helps to remove all the daze effortlessly.

Bottom Line
Grouting is a perfect way to fill the gap between the tiles and give them a smooth finish. These are
the steps you need to do grouting properly. Moreover, you can use the grout finishing tool that
helps you to do the task smoothly.