J P Polymer Sheetings

J P Polymer Sheetings Ltd is one of the UKs largest independent
stockists of rubber sheetings and mattings.

We have a well equipped and extensive warehouse of over 15,000
square feet. Which is centrally based in the West Midlands.

We have large stocks of our fast moving materials and are
continuing to expand the product ranges to keep up with ever

increasing customer demands.

With access and support to modern research and development
facilities though our principle suppliers, who are leading experts in

the field of Industrial Laminates.

As a member of Smithers Rapra, we are able to offer independent
and third Party testing and consulting services.

For the convenience of our customers the delivery fleet Is now up
to 4 vehicles. Enabling us to give flexible and prompt delivery
options.

With over 25 years of Worldwide import and export and the support
of local Logistics contractors, we can ship anywhere in world.

Our enthusiastic sales team look forward to offering assistance,
advice and service to both existing and potential new customers.

Our wide range of rubber sheetings have a vast range of uses for
many applications in such industries as:

Agricultural, Architectural, Automotive, Aviation, Ceramic, Civil Engineering, Electrical, Electronic,
Mechanical Engineering, Marine and Naval, Military, Food Processing, Mining, Petrochemical,
Quarrying.

NATURAL SYNTHETIC NEOPRENE NITRILE

We can supply a range of natural and synthetic sheetings in a vast range: Viton®

TO MEET: •Hydrocarbons
• Sheet Thicknesses from 0.8 mm - 100 mm •Chemical Resistance

• Sheet Widths from 0.914 mtrs - 1.8 mtrs •Weather Resistance
•Fire Resistance
Hypalon® EPDM SILICONE VAMAC

FOR APPLICATIONS INCLUDING:

• Acids •Alkalis
•Heat / Cold •Electrical Conductivity
•Food Grades •Potable Drinking Water - WRAS approved
•Abrasion Resistance •Electrical Resistance

BS GRADES WRC GRADES INSERTION FOOD FDA SHOT BLAST

SHEETING - SELECTION CRITERIA

Application Natural/ Neoprene Nitrile EPDM Butyl Silicone Viton®
SBR
Petrol Poor Good Poor Poor Poor Excellent
Poor

Lubricating Oils Poor Fair Good Poor Poor Good Excellent

Acid Fair Fair Good Excellent Excellent Fair Good

Alkali Fair Fair Fair Good Excellent Fair Fair

Hydraulic Phosphates Poor Poor Poor Good Good Good Poor
Fluid Silicates Poor Good Good Fair Fair Poor Good

Abrasion Resistance Excellent Good Good Good Good Fair Good

Tear Strength Good Good Good Fair Good Poor Fair

Impact Resistance Excellent Good Fair Good Good Fair Fair

Resilience Excellent Good Good Good Fair Poor Fair

Impermeable to Gases Fair Good Good Good Excellent Poor Excellent

Compression Set Good Good Good Fair Fair Good Good

This is a general guide only. If in doubt please consult.

Care should be taken in selecting the most suitable quality for each application. Advice is available but final responsibility remains with the
customer

MATERIAL TOLERANCES AND YIELDS

In today's competitive market yields are of vital importance. With the above in mind
we have a policy of stocking a wide range of thicknesses and roll widths to give our

customers maximum choice with clear tolerance definitions.

Roll Length Tolerances Roll Width Tolerances

Length (mm) Tolerance +/- Length (mm) Tolerance +/-

1000 mm 50 mm 900 mm 18 mm

5000 mm 250 mm 1000 mm 20 mm

10000 mm 500 mm 1220 mm 24 mm

20000 mm 1000 mm 1300 mm 26 mm

1400 mm 28 mm

Thickness Tolerances

Over Upto Tolerance +/-

0.5 mm 2 mm 0.2 mm
2 mm
3 mm 3 mm 0.3 mm
6 mm
10 mm 6 mm 0.4 mm
15 mm
10 mm 0.5 mm

15 mm 0.8 mm

25 mm 1.0 mm

OPERATING TEMPERATURE TOLERANCES

Please note:
The information, figures, calculations, test values and data contained in this publication - which we use to best
advise our customers - correspond to current engineering standards. This data is the result of long years of tests

and trials. As individual operation conditions influence the application of each sheet, the information in this
publication can only be seen as a rough guideline. In the individual case it is the sole responsibility of the
customer to evaluate requirements, in particular if specified properties are sufficient for use. Samples are available

on request or you to determine suitability.
Our qualified engineers are available to discuss difficult problems with you.
As we cannot have any influence over how our products are used, they are used entirely at the user's own risk. We
do of course guarantee the quality of our products according to general sales conditions, available on request.
Subject to change and error. The mentioned properties are guiding values.

NATURAL / SBR RUBBER

Temperature range -50° + 85°C. Has excellent physical properties including abrasion resistance, good tensile
strength, low compression set and high tear properties. Resistance also to some organic solvents and many

organic salts and acids. These are good general properties, which will vary between grades.

Ref Specification Hardness SG Tensile Elongation Colour
Shore A Strength at Break %
(MPa)Min

N02 Commercial 65° 1.50 3 250 Black
N02 ECON Black
Economy 65° 1.45 2.5 200 Black
A9506 Black
N65 Commercial 70° 1.46 4 200 Black
N66 Black
Commercial 50° 1.40 4 300 Black
N66 ECON Black
A9506 Insertion 65° 1.50 3.5 300 Black
N04 Tan
N63 NR/SBR Insertion 65° 1.5 2.5 200
N06 Black
Insertion 70° 1.46 4 230
A590 Tan
Shot Blast 60° 1.2 14 500 Black
A560
Blackstar Soft Shot Blast 50° 1.20 14 500

Shot Blast Para 45° 1.05 16 600

Abrasion 60° 1.15 15 400
Resistant

Shot Blast Para 40° 1.06 18 600

Blackstar 60° 1.15 15 400

Blackstar also available with VKS Tacky back bonding layer and EP125 Overlay.

Care should be taken in selecting the most suitable quality for each application. Advice is available but final responsibility remains
with the customer

C H L O R O P R E N E (NEOPRENE) / S B R R U B B E R

Temperature range -35° + 125°C. Good strength and suitability or minor mechanical applications.
Moderately resistant toweathering and oxidative ageing. Resistant to some inorganic salts and acids and ozone. Flame retardant.

Moderate resistance to petroleum based products other than aromatic and halogenated hydrocarbons.
These are general properties, which will vary between grades.

Ref Specification Hardness SG Tensile Elongation Colour
Shore A Strength (MPa) at Break %

C20 Commercial 70° 1.45 6 300 Black

C20 ECON CR/SBR 70° 1.4 3.5 250 Black

C20S ECON CR/SBR 60° 1.4 3.5 250 Black

N9581 Commercial 70° 1.35 5 300 Black

C22 Commercial 50° 1.35 5 400 Black

C24 BS2752:C40 40° 1.35 12 500 Black

C25 BS2752:C50 50° 1.35 13 450 Black

C26 BS2752:C60 60° 1.42 13 300 Black

C2 BS2752:C70 70° 1.40 13 400 Black

C34 Flame Retardant 70° 1.40 13 400 Black
(NCB)

C66 Insertion 60° 1.45 - - Black

N9581 Insertion 60° 1.35 5 300 Black

C20 Commercial 70° 1.45 6 300 Black

N9581 Commercial 70° 1.35 5 300 Black

Care should be taken in selecting the most suitable quality for each application. Advice is available but final responsibility remains with the
customer.

NITRILE RUBBER
( A C R I L O N I T R I L E B U T A D I E N E)

Temperature range -30° + 120°C. Has excellent resistance to petroleum based fluids, oils,
solvents and greases - but only average resistance to aromatic hydrocarbons. Moderate

mechanical properties These are general properties, which will vary between grades

Ref Specification Hardness SG Tensile Elongation Colour
Shore A Strength (MPa) at Break %
A40 Commercial Black
A40 ECON NBR/SBR 70° 1.48 4 250 Black
70° Black
A66 Commercial 70° 1.40 3.5 250 Black
P9540 Insertion 65° Black
P559 70° 1.4 5 300 Black
High Grade 50° Black
A43 High Grade 40° 1.45 7 250 Black
A41 Commercial 50° Black
A45 BS2751:BA40 60° 1.49 10 330 Black
A46 BS2751:BA50 70° Black
A47 BS2751:BA60 80° 1.45 4 250
A48 BS2751:BA70
BS2751:BA80 1.11 7 600

1.20 9 450
1.19 9 400

1.25 13 250

1.30 9 400

Care should be taken in selecting the most suitable quality for each application. Advice is available but final responsibility remains
with the customer.

BUTYL (ISOBUTYLENE-ISOPRENE)

Temperature range -45° + 130°C. Very good weathering resistance.

Low gas and moisture permeability. Poor resistance to petroleum based oils and fluids.

Ref Specification Hardness SG Tensile Elongation Colour
Shore A Strength (MPa) at Break % Black

B70 Commercial 60° 1.23 8 350

E. P. D. M. ( E T H Y L E N E P R O P Y L E N E)

Temperature range -40° + 120°C with excellent resistance to water, steam, ozone ageing and many chemicals. Not
suitable for contact with petroleum liquids. These are general properties, which will vary between grades.

Ref Specification Hardness SG Tensile Elongation Colour
Shore A Strength (MPa) at Break %
E80 Commercial Black
E80 ECON EPDM/ SBR 70° 1.40 4 200 Black
Peroxide Cured Black
E9614 High Grade 70° 1.40 3.5 250 Black
E9566 Black
E4580 EPDM 70° 1.22 9 200

70° 1.30 7 250
50° 1.05 8 500

Care should be taken in selecting the most suitable quality for each application. Advice is available but final responsibility remains
with the customer.

SILICONE, FKM AND VITON®

The Silicone Rubber is FDA approved and compatible with most foods, especially at elevated temperatures.
J P Polymer offer Silicone in standard colours of red and white. Blue coloured Silicone can be sourced if required

We offer 2 grades of fluoroelastomers V99 Viton® A, compounded at Trelleborg in Spain using Chemours Branded
Viton, suitable for harsh environments where aggressive chemicals and high temperatures may be involved.

Temperature range -30° + 250°C. Good resistance to most chemicals and industrial fluids, will retain strength and
withstand embrittlement during long-term heat exposure

The second is V90 FKM a very high grade of commercial fluoroelastomer, a more cost effective option for those
harsh environments. Temperature range -20° + 220°C. More economical then Viton®, but with similar resistance to

most chemicals and industrial fluids

Ref Specification Hardness SG Tensile Elongation Colour
Shore A Strength at Break %
1.25 White
S89 Silicone 60° 1.25 (MPa) 340 Red
S88 Silicone 60° 1.9 340 Black
V90 FKM 75° 1.85 7.9 160 Black
V99 Viton® A 70° 165
7.9

7

7

As we cannot have any influence over how our products are used, they are used entirely at the user's own risk. We do of course
guarantee the quality of our products according to general sales conditions, available on request. Subject to change and error. The

mentioned properties are guiding values.

Care should be taken in selecting the most suitable quality for each application. Advice is available but final responsibility remains
with the customer.

WRAS APPROVED EPDM SHEETING

Ref Specification Approval Hardness Specific Tensile Elongation Compression
Number Shore A Gravity Strength at Break % Set

(MPa)

E78 WRAS EPDM 1406512 70° 1.18 11 250% 20%

E79 WRAS EPDM 1604516 80° 1.17 10 250% 30%

WATER BYE-LAWS APPROVED PRODUCT DEVELOPED and APPROVED for DRINKING/POTABLE
COLD WATER APPLICATIONS in ACCORDANCE with our APPROVAL NUMBERS

AS THE SPECIFICATION AND TESTING PROCEDURES CONTINUE TO DEVELOP IT IS ESSENTIAL
THAT ONLY A CURRENTLY APPROVED PRODUCT IS USED WHEN IN CONTACT WITH MAINS

WATER. APPROVAL NUMBERS ARE ONLY VALID FOR 5 YEARS FROM DATE OF INCLUSION IN
THE WRAS DIRECTORY AND SHOULD ALWAYS BE VERIFIED FOR THE USERS’ PROTECTION.

Manufactured in Europe by:-

WARNING

FAILURE TO USE AN APPROVED PRODUCT IN THIS TYPE OF APPLICATION CAN RESULT IN A BREACH OF
WATER INDUSTRY REGULATIONS

WEAR RESISTANT RUBBER SHEETINGS

Wear resistant rubber is specially designed to resist mechanical wear and is therefore used in a

Multitude of modern industries, everything from mining and quarries to steel works and foundries.

It may be used to line troughs, conveyance vessels or other areas subjected to shock or impact

It can provide protection for conveyed materials, and will be superior to metal or concrete in the
same environment.

There are different types of wear resistant rubber available and care should be taken in selecting the
most suitable quality for each application and environment.

Advice is available from our Sales Team, but final responsibility remains with the customer.

Ref Specification Hardness SG Tensile Abrasion mm³ Colour
Shore A Strength (MPa)
Blackstar Black
Redstar SBR Abrasion 60° 1.15 15 120³ (10n) Red

N33 SBR Abrasion 40° 1.06 16 110³ (5n) Red
BV3 Black
N43 Redstar and Blackstar also available with VKS Tacky back bonding layer and EP125 Overlay. Pink/Red
N04 Black
N63 SBR Abrasion 45° 1.05 16 83³ (5n) Black
N06
Skirtboard Rubber 50° 1.26 6.5 130³ (5n) Tan

Pink High 40° 1.05 20 80³mm³
Abrasion

Shotblast 60° 1.2 14 150³

Shotblast 50° 1.20 14 100³

Tan Shotblast 45° 1.05 16 85³

As we cannot have any influence over how our products are used, they are used entirely at the user's own risk. We do of course
guarantee the quality of our products according to general sales conditions, available on request. Subject to change and error. The

mentioned properties are guiding values.

FOOD GRADES

COMPOUNDED FROM A LIST OF FDA APPROVED MATERIALS PART 177,
INDIRECT FOOD ADDITIVES SEC 177.2600 RUBBER ARTICLES INTENDED

FOR REPEATED USE

Ref Specification Hardness SG Tensile Elongation Colour
Shore A Strength at Break %
E81 EPDM 1.40 White
C35 Neoprene 70° 1.50 (MPa) 200 White
A42 60° 1.40 600 White
A38 Nitrile 60° 1.40 4 500 Blue
N01 Nitrile 65° 1.55 10 500 White
N03 NR/SBR 60° 1.55 300 White
NR/SBR 50° 6 300
Ref 8 Colour
3.5
A618** White
A621** 3.5 White
P627** White
SEMPERIT EU 1935 FOOD GRADES

Specification Hardness SG Tensile Elongation
Shore A Strength at Break %
NR/SBR 1.28
NR/SBR 45° 1.43 (MPa) 550
Nitrile 65° 1.32 380
60° 12 500

8

11

MATTINGS AND FLOORINGS

We stock a substantial range of floorings in rolls, mats and tiles.

 Fine Groove Matting  Broad Groove Matting  Animal / Stable Matting
 Checker Plate Matting  Round Stud Matting
 Decktop Matting  Pyramid /Diamond Matting  Electrical Resistance Matting
 Hammerblow  UTE Matting
 New IEC61111 Electrical
Grades

All ex stock in NR/SBR but available as a bespoke item in oil, flame retardant
grades - colours available

PATTERNED RUBBER MATTINGS

▲FINE GROOVE MATTING:- ▲PYRAMID MATTING:- ▲WIDE GROOVE MATTING:-
Available in 3mm and 6mm Available in 3mm and 4.5mm Available in 3mm and 6mm

▲DECKTOP MATTING ▲CHECKERPLATE MATTING:- ▲CIRCULAR STUD MATTING:-
Available in 3mm Available in 3mm
(AVAILABLE IN 4 COLOURS)

PATTERNED RUBBER MATTINGS

▲ 1 BAR CHECKERPLATE

▲ HONEYCOMB UTE MATS ▲ IEC 61111 ELECTRICAL MATTING

PATTERNED RUBBER MATTINGS

Ref Specification Colour Thickness Width Length

N11 Fine Ribbed Black 3mm/ 6mm .914/1m/1.22m 10 mtrs
N11 E Economy Grade Black 3mm/ 6mm .914/1m/1.22m 10 mtrs
N27 1 Bar Checkerplate Black 10 mtrs
N28 Black 3mm 1.22m 10 mtrs
N25 Checkerplate Black, Fawn, Grey, 3mm 1.22m 10 mtrs
Blue 3.2mm
N62 Decktop Matting 1m 5 mtrs
N48 Black 10mm 10m
N12 Extra Wide 4mm 1.83m
N13 Honeycomb UTE Mat Black 3mm and 6mm 1.4m 10 mtrs
N12 Black 3mm 1.22m 10 mtr
N11 Hammerblow 6mm 1.22m 10 mtrs
N11 Broad Ribbed Black 3mm 1.4m 4.2 mtrs
Cow Commercial Raised 4mm 1m 4.5 mtrs
Black 17mm 1m 1.83 mtrs
Circular Black 1.22m
Extra Wide Ribbed Black HAMMERBLOW
Black
Pyramid
Pyramid
Animal Mat

STABLE/ANIMAL Care should be taken in selecting the most suitable quality for each application.
M A TS Advice is available but final responsibility remains with the customer.

GRIP TOP MATTING

Ref Specificatio Thickness Tensile Elongation Max Colour
n Strength at Break % Operating
Temperature
(MPa)

N55 Grip Top 6mm 30 150 -40/+80°C Black

Grip top rubber matting used for various
applications such as conveyor belts horseboxes,
ramps.

Made from NR/SBR with a rough moulded top (the
anti slip surface is ideal for steep inclined/declined
applications), and either a 1 or 2 ply insertion made
from EP polyester/polyamide fabric

EP80 fabric insertion tensile strength (50 x 200mm):-
Longitudinal (kgf min) 500
Transversal (kgf min) 250

Rolls are 1.22m or 1.5m Wide x 50m (+/-4m) Long, in
either 1 or 2 ply, this can also be sold in lengths of
the roll on request (max 5m)

ELECTRICAL MATTING(FINE RIBBED)

Ref Specification Colour Thickness Width Length

N08 Tested 15000V Black 9mm .914/1m/1.22m 10 mtrs

N08 Tested to 11000V Black 6mm .914/1m/1.22m 10 mtrs

N09 IEC 61111 Class 0 Black 6mm .914/1m/1.22m 10 mtrs

Other classes of IEC 61111 available to order, contact our sales office for more
details:- 0121 520 5020

Please see our website:- www.iec61111.com for further information on this product

Care should be taken in selecting the most suitable quality for each application. Advice is available but final responsibility remains
with the customer.

Care should be taken in selecting the most suitable quality for each application. Advice is available but final
responsibility remains with the customer.

As we cannot have any influence over how our products are used, they are used entirely at the user's own risk. We
do of course guarantee the quality of our products according to general sales conditions, available on request.
Subject to change and error. The mentioned properties are guiding values.

Our economy grades are made to a very high standard and made with similar properties to the standard grades,
they contain a much lower base polymer content, so can sometimes be used as a cheaper, less hard wearing
solution.

The information, figures, calculations, test values and data contained in this brochure - which we use to best
advise our customers - correspond to current engineering standards. This data is results of long years of tests and

trials.
As individual operation conditions influence the application of each sheet, the information in this brochure can
only be seen as a rough guideline. In the individual case it is the sole responsibility of the customer to evaluate

requirements, in particular if specified properties are sufficient for use.

As we cannot have any influence over how our products are used, they are used entirely at the user's own risk.
We do of course guarantee the quality of our products according to general sales conditions, available on request.

Subject to change and error. The mentioned properties are guiding values

Samples are available on request, to enable you to carry out your own tests for suitability.

PRINCIPLE UK SUPPLIERS FOR: PRINCIPLE UK SUPPLIERS FOR:

Unit 26 Coneygre Industrial Estate,
Birmingham New Road,
Tipton,
West Midlands.
DY4 8XP

(For Sat Nav use DY4 8JW)
Tel: 0121 520 5020
Fax: 0121 522 4610

email: sales@jppolymer.co.uk