corporate brochure (One Below)

CONTENTS


www.JMF-GROUP.co.uk
Welcome!
This is a personalised presenter for Mark Ward.
Which has been produced to showcase our extensive range of services available to you.
We would appreciate the opportunity to be considered as an alternative supplier.
6 7 10 19 31
RESEARCH
SIGNAGE
CASE STUDIES
TECHNICAL DATA
installation


WE ARE JMF GROUP
We first opened our doors for business in 1989. And from day one it has been our mission to provide an unrivalled level of expertise and service for our clients.
In fact our unique combination of experience and in-house talent ensures we exceed expectations across all aspects of creative design and branding, print,
fulfilment and distribution, PR, marketing and communications, digital, signage, as well as photography.
Over the past 30 years we have worked with a wide range of private, public and third-sector organisations. So we can honestly say we have a proven track
record, as well as an outstanding reputation for excellence of our customer offering, right across the board.
We put our success down to our flexible approach - one that delivers on quality and service every time. We also have a keen understanding of the constraints of
budgets and deadlines. This ensures our proactive and highly skilled teams are able to provide creative, innovative, and above all, cost-effective and tailor-made
solutions to every client’s needs.
www.brightred.org.uk
B
E
L
R
A
T
E
I
N
C
G
9
1
0
2
-
1
9
8
9


Your Airport
WORKING ON THE NEXT BIG THING... JUST SOME OF OUR CLIENTS KENNY ATKINSON
OF
5


RESEARCH
OBSERVATION
Our design team researched your current brand and shop fascias, below is the way our in house fabrication team would produce this signage & print.
SIGNAGE CONSTRUCTION 1
Technical specification included:
• Foam letters
• 20mm foam with face applied vinyl
• Fitted by hanging from ceiling tile grid
SIGNAGE CONSTRUCTION 2
Technical specification included: • Reverse applied vinyl
• Fitted to the inside of windows
SIGNAGE CONSTRUCTION 3
Technical specification included: • Aluminium return letters
• Acrylic faces
• Internally illuminated with LEDs
SIGNAGE CONSTRUCTION 4
Technical specification included:
• Steel frame with internally illuminated aperture cut panels
• Logo at the top is Aluminium return letters
• Acrylic faces internally illuminated with LEDs
TIMESCALES
On average we can produce this type of signage within 3-7 working days.
WORKING ON THE NEXT BIG THING...
6


SECTION DESCRIPTOR
SIGNAGE
WORKING ON THE NEXT BIG THING...
Signage is the design or use of signs and symbols to communicate a message to a specific group, usually for the purpose of marketing or a kind of advocacy. Signs are any kind of visual graphics created to display information to a particular audience. This is typically manifested in the form of wayfinding information in places such as streets or on the inside and outside buildings. Signs vary in form and size based on location and intent, from more expansive banners, billboards, and murals, to smaller street signs, street name signs, sandwich boards and lawn signs. Newer signs may also use digital or electronic displays.
7
ACETATE ACRYLIC
ACID ETCHING ANODIZED FINISH AWNING BACKLIT BUILT-UP DEBOSSED EMBOSSED EXTRUSION FLEX FACE
LED


SIEGCNTAIOGNEDESCRIPTOR
We’re pleased to be able to say that JMF is one of the UK’s fastest growing sign companies, offering state-of-the-art services across a wide variety of market sectors.
Should you get the chance to take a look inside our 25,000 square foot factory units, you’ll discover the latest in-house design, metal and plastic fabrication facilities, along with vinyl, large format and digital print capability. And it’s all backed by first class project management, national installation services and the maintenance of corporate signs and images.
Our customers range from individual, one-off high street stores right through to national blue chip companies with large-volume roll-out contracts.
WORKING ON THE NEXT BIG THING...
8


WORWKOINRGKOINGTOHNETNHEEXTNEBXIGT TBHIGINTGH.I.NG... SECTION DESCRSIPGTNOARGE
DID YOU KNOW?
JMF Group have their
own in-house signage and manufacturing division, that can fabricate and produce a vast range of fascias and external illuminated signage for clients.
9
9


SIEGCNTAIGOEN| CDAESECSRTIUPDTYO0R1
WORKININGGOONNTHTEHNEENXTEBXITGBTIHGINTGH..I.NG...
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS
The Brief
Admiral Gaming wanted to create a range of communications within its casinos. These included internally illuminated aluminium signage, reverse- applied frosted logos and lettering on windows and doors, as well as internal lightboxes and digital screens with animated messaging.
Our Response
As with any project, our fitting team surveyed the site and compiled a comprehensive picture of what was involved in order to accurately brief the design department. Designs and artwork were produced and given to the client for sign-off, so that print and fabrication could then deliver the finished product. The project was completed on time and on budget within 10 days of the initial order.
Construction
Technical specification included:
• Aperture-cut 1050-grade aluminium fabricated returns using brakepress
• Wet-sprayed pantone colour match 282c
• Apertures backed with 3mm LED-grade opal 050
• 10mm CNC cut opal push through letters fusioned to 3mm
• 5-year guaranteed LED modules & 12v converter transformers illuminating all apertures
• Illuminated yellow stripe across multiple panels.
Result
We are currently working on a nationwide rollout of the new signage with additional point-of-sale projects planned for 2019 and 2020.
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS
FRONT WINDOW DISPLAY
BACKLIT DURATRAN PRINTS IN BOXES
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS
10


WORKING ON THE NEXT BIG THING...
CASE STUDY 02
FRONT FASCIA
NON-ILLUMINATED FLEX FACE WITH EXTERNAL UPLIGHTING
FRONT FASCIA
EXTERNALLY ILLUMINATED FLEX FACE & REVERSE-APPLIED WINDOW AND DOOR VINYL
The Brief
Yesss Electrical wanted high-quality, internally illuminated aluminium signage, as well as reverse- applied frosted logos and lettering for all windows and doors. They also required double-sided foamex hanging signs inside the store - and external projecting signage.
Our Response
Our teams put together a hard-working and bespoke solution that ensured the whole project was delivered to our client’s deadline. From initial design and on-site, to design, manufacture and installation, we were 100% committed to providing the highest quality and a professional service - all within 20 days of the inital order.
Construction
Technical specification included:
• Aluminium extrusion cut/mitred/welded/painted black
• Stucco-aluminium backing with 5-year gauranteed LED modules
• Double-strike high density P.V.C
• Skin clipped and tightened using special tensioning clips.
Result
With our 2016/2017 deadlines already completed, we are awaiting rollout for the new flexface projects for 2019 and 2020.
FRONT FASCIA
TOTEM
11


CASE STUDY 03
WORKING ON THE NEXT BIG THING...
FRONT FASCIA
FLEX FACE
The Brief
We were delighted when well-known high street presence Poundstretcher chose us to provide their internally illuminated signage, as well as window vinyls, double-sided in-store posters and leaflets
Our Response
Amongst the wide range of benefits we offer our clients is complete peace of mind. Our professional workforce handled everything from start to finish - from a comprehensive site survey, through to design, print and fabrication of the final product.
Construction (FLEXFACE)
Technical specification included:
• Aluminium extrusion cut/mitred/welded/painted RAL 3020
• Stucco aluminium backing with 5-year guaranteed LED modules
• Double-strike high-density P.V.C. skin
• Skin clipped and tightened using special tensioning clips
Construction (APERTURE CUT)
Technical specification included:
• Aperture-cut 1050-grade aluminium fabricated returns using brakepress powder-coated RAL 3020
• Apertures backed with 3mm LED-grade opal 050
• 5-year guaranteed LED modules
• 12v converter transformers lighting up apertures.
Result
A total of 65 stores were completed throughout 2016 and 2017. We are currently awaiting go-ahead on a rollout programme for 2019 and 2020.
FRONT FASCIA
FLEX FACE
PROJECTING SIGN, WINDOW VINYLS & APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTER
FRONT FASCIA
ILLUMINATED FLEX FACE
FRONT FASCIA
FLEX FACE & WINDOW VINYLS
12


WORKING ON THE NEXT BIG THING...
CASE STUDY 04
FRONT FASCIA
BUILT-UP FACE LIT LETTERS
The Brief
Clothing brand Pep & Co came to us with a requirement for external aluminium signage for their new stores. This was to be face illuminated, 3 dimensional letters for maximum visual impact.
Construction
Technical specification included:
• 5mm opal 050 rebated acrylic faces
• 80mm deep pre-painted aluminium returns
• 20mm foamex back trays with 5-year guarantee LEDs for illuminating the faces as the type fitted flush to fabricated aluminium trays
Construction (SECONDARY SIGNAGE)
Technical specification included:
• Reverse-applied frosted logos and lettering to windows and doors
• 3mm di-bond panels with snap-fix locators
• Full-colour digitally printed wrap-around vinyls.
Result
We’re pleased to say that we’re continuing to
work with Pep & Co, producing both internal and external signage for their up and coming stores for 2019/2020.
IN-PRODUCTION
BUILT-UP FACE LIT LETTERS
FRONT FASCIA
INTERNAL WINDOW VINYLS
INTERNAL WAYFINDERS
APPLIED WALL GRAPHICS
FRONT FASCIA
FULL-COLOUR PRINTED VINYL
FRONT FASCIA
WINDOW VINYLS
13


CASE STUDY 05
WORKING ON THE NEXT BIG THING...
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS & WINDOW VINYLS
The Brief
When well-known budget retailer Poundland approached us to improve their look, we were
only too happy to help. They required internally illuminated aluminium signage, reverse-applied frosted logos and lettering for windows and doors, as well as internal double-sided foamex hanging signs and external projecting signage.
Our Response
It was quite a shopping list, so we sent our fitting teams out to see the site first hand. They undertook a detailed survey to ensure the design team would have everything they needed create the appropriate artwork and visuals for the client.
Initial concepts were then presented to the client. As soon as we received sign-off, artwork was briefed into the print and metal fabrication teams so they could create the finished product. We’re proud to say that the whole process ran like clockwork.
Construction
Technical specification included:
• Aperture-cut 1050-grade aluminium fabricated returns using brakepress powder-coated RAL 5021
• Apertures backed with 3mm LED-grade opal 050
• 10mm CNC cut opal push-through letters fusioned to 3mm
• 5-year guaranteed LED modules & 12v converter transformers illuminating all apertures
Result
Poundland commissioned us to roll out a further 122 sites for 2019/2020. Team JMF were very pleased
to see the response on LinkedIn from Austin Cooke, Retail Director at Poundland UK & Ireland, who stated he was delighted with the new stores’ opening.
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED WITH BUILT UP LETTER FACE LIT
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED WITH BUILT UP LETTER FACE LIT
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS & WINDOW VINYLS
14


WORKING ON THE NEXT BIG THING...
CASE STUDY 06
FRONT FASCIA
RAISED 3D LETTERING & WINDOW VINYLS
The Brief
We understand how important creating the right impact can be. So when Cash Converters needed their internal signage bringing in line with their new identity, we were ready to meet the challenge. The new branding covered all in-store collateral, including reverse-applied frosted logos and lettering to windows and doors, as well as internal wall signs.
Our Response
Once we were given the go-ahead, our fitting teams completed a full site survey on behalf of the design department. Full visuals and artwork were then created for client sign-off. Final artwork was then sent to the print and fabrication teams who completed the finished product. Amazingly the whole project was turned around within 10 days of the initial order.
Construction
Technical specification included:
• Full-colour laminated digital prints applied to 5mm thick foamex panels
•Bonded to internal walls
Result
The first North-East site has been completed and we are currently awaiting confirmation of rollout for the further stores in 2019/2020.
INTERNAL WAYFINDER
LAMINATED DIGITAL PRINTED FOAMEX PANELS
INTERNAL WAYFINDER
LAMINATED DIGITAL PRINTED FOAMEX PANELS
15


CASE STUDY 07
WORKING ON THE NEXT BIG THING...
FRONT FASCIA
FLEX FACE
Quality Products £1, More or Less
The Brief
High street retailer Pound Store wanted to give their identity a facelift. So they approached us to set the wheels in motion, both to create the new branding for all of their stores and to apply it. We were tasked to produce internally illuminated aluminium signage, as well as reverse-applied frosted logos and lettering for shop windows and doors. Double-sided foamex hanging signs were required for inside the stores, with projecting signage to the exterior.
Our Response
The client wanted a fast turn-around, so our
fitting teams wasted no time in completing a comprehensive site survey, which included taking accurate measurements and photographs. With plenty of reference to hand, the design team could provide visuals for client approval and final artwork. The print and fabrication teams could then get to work bringing the concepts to life and producing a high-quality finished product. From the creation of the initial brand guidelines to final sign off took no more than 10 days.
Construction
Technical specification included:
• Aperture-cut 1050-grade aluminium fabricated returns using brakepress powder-coated RAL 5002
• Apertures backed with 3mm LED-grade opal 050
• 5-year guaranteed LED modules
• 12v converter transformers illuminating all apertures
Result
To date, five sites have been completed within a four-week rollout. We’re currently awaiting feedback from specially commissioned research groups before implementing a rollout for 2019.
FRONT FASCIA
ILLUMINATED FLEX FACE
PROJECTING SIGN
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS
FRONT FASCIA
BUILT UP HALO LIT 3D LETTERING
16


WORKING ON THE NEXT BIG THING...
CASE STUDY 08
IN PRODUCTION
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED, BACKED WITH OPAL
easyCoffee
The Brief
We were given the opportunity to collaborate with and offer our services to the Easy brand after we were recommended by another of our clients, Poundland. Thanks to their strong endorsement we were able to help build the Easy Coffee brand, the latest in the parent company’s portfolio, by completing a full site survey, followed by sign proofing, pricing, manufacturing and installing an entire site in Sutton.
OUR RESPONSE
As we say, we love a challenge - and after being given a strict deadline to adhere to it was a case of all hands on deck right from the very start. Throughout the sign design process we complied with stated brand corporate guidelines, then on the day of installation we ensured that our most experienced in-house fitting team was on site to make sure that all went well.
CONSTRUCTION
Technical specification included:
• 10 50 grad aluminium aperture cut on CNC router
• Fabricated using 3m break press, corners welded using MIG on pulse setting panels powdered coated to corporate brand guidelines colour with speciality finish
• Backed off with 5mm opal 050 acrylic
• Held in with m4 threaded studs with elongated holes to allow for any expansion and contraction in acrylic
• 5 year guarantee LED modules adhered to aluminium composite sheeting, wired into 12v transformer creating fully illuminated face letter
• Fitted by JMF’s top team using aluminium angles and colour coated fixings
Result
It was our pleasure to help the Easy brand open one of its first stores on the UK. We will be working with the client to complete more stores in the future.
IN PRODUCTION
CNC ROUTER CUTTING APERTURE TRAY
IN PRODUCTION
APERTURE CUT TRAY BEING FABRICATED TO FORM
17


CASE STUDY 09
WORKING ON THE NEXT BIG THING...
FRONT FASCIA
FLEX FACE & WINDOW VINYLS
bargain buys big brands, big discounts
The Brief
We were asked to create a new brand for a high street retailer, and after hours of brainstorming we came up with what is now the Bargain Buys brand. Once the brand had been established we were given three months to survey over 50 sites, then design, proof, manufacture and install signage for them all.
The RESPONSE
As store opening dates had already been set, we needed to meet every single deadline in order
to be successful. Thankfully, our highly efficient procedures ensured that everything ran smoothly with no hiccups along the way.
Construction
To date we have we have completed 65 sites for Bargain Buys using two different types of sign, either a flex box or aperture-cut pans.
Flex Box:
• 6m lengths of extruded aluminium
• Lengths power coated brand guidelines
• Painted lengths fixes together using corner brackets, back support, brace sections backed off with stucco aluminium sheet
• 5yr guarantee module LED’s
Aperture cut pans:
• 10 50 grade aluminium
• Aperture cut on CNC router
• Fabricated using 3m break press, corners welded using MIG on pulse setting
• Panels powered coated to corporate brand guidelines colour with speciality finish
Result
As a result of completing so many sites nationally we have been able to build a strong working relationship with our client who has since asked us to produce all their print work, including posters and flyers.
SHOP SIDE WINDOWS
APERTURE CUT TRAY
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS
FRONT FASCIA
ILLUMINATED FLEX FACE
FRONT FASCIA
APERTURE CUT TRAY & PROJECTING SIGN
FRONT FASCIA
APERTURE CUT ALUMINIUM, FABRICATED, PAINTED BACKED WITH OPAL, 10MM PUSH THROUGH LETTERS & WINDOW VINYLS
18


TECHNICAL DATA
A technical data sheet or spec sheet summarises the performance and other technical characteristics of a product. All technical data sheets exclude financial and management data. JMF like to share any of their technical data as it confirms to the client that we use the highest quality and most suitable material for each specific application.
VINYLS
POLYCARBOANTE & ACRYLIC STAINLESS STEEL& ALUMINIUM PAINTS
INKS
BANNERS
EXTRUSIONS
FIXINGS
BOARDS
LED MODULES


TECHNICAL DATA | SIGNAGE MACHINERY THE TOOLS OF OUR TRADE
The following are just some of the tools we have at our disposal to ensure that each project is delivered to the highest of professional standards.
• CNC Router - cutting aluminium, acrylics, foam and aluminium composite materials to exact specifications.
• 3M Guillotine & Breakpress - for bespoke panel fabrication.
• MIG & TIG Welders - for welding aluminium.
• Flame Polisher - for the effective polishing clear acrylic edges.
• Hand Benders - for folding returns on 3D lettering
• Rollers - for shaping and bending aluminium
• Bandsaw & Chopsaw - for cutting extrusion
• x3 Large Format Printers - full colour digital
• x2 Vinyl Plotters - for cutting single colour vinyl graphics
• x2 Rolls Rollers - for laminating printed graphics direct to substrates
WORKING ON THE NEXT BIG THING...
CNC ROUTER
CUTTING ALUMINIUM FOR APERTURE CUT TRAY
WELDING
BENDING & FUSING ALUMINIUM FOR APERTURE TRAY
CHOPSAW
SIZING UP MATERIALS FOR SIGNAGE
20


WORKINGONTHENEXTBIGTHING...
Characteristics
Cutting
Based on the differences in electronically controlled cutting equipment and font characteristics, users should determine their own cutting and weeding capability.
These factors can affect cutting quality and ability:
 Sharpness of the knife blade. Dull blades create a serrated look to the cut edge of the film.
 Weight on the knife blade. The ideal weight slightly scores the liner. Too little weight does not cut completely through the film and the adhesive. Excessive weight cuts the liner. It also causes the blade to drag, accelerating wear and eventually creating a serrated cut edge on the film.
Premasking and Prespacing
The 3M Prespacing or Prespacing Tape you use depends on the type of graphic produced and the overprint clear system. For graphics that have large amounts of exposed liner, use a prespacing application tape. If there is very little exposed liner, use a premasking application tape.
Application
Note: Use the dry application method when possible.
1. Follow the dry application methods in Instruction Bulletin 5.5, Release C-EU, Effective April 2000 or later.
2. Be sure that the film is applied at temperatures  8°C.
Maintenance and Cleaning
If pressure washing is used, do not wash at a distance less than 30 cm and point the nozzle perpendicular to the body of the vehicle. Do not wash with a pressure higher than 80 bar.
TECHNICALDATA| VINYLS 3M
3M is a globally recognised brand associated with quality. This data sheet shows which substrates the vinyl is suitable for, their life span, how to cut them, and how to apply, maintain and clean them.

Product Bulletin 50 (UK)
Release UK, Effective May 2014 Black bar in the margin indicates changes
3MTM ScotchcalTM General Purpose Graphic Film Series 50, SP50 & SP50R
Product Bulletin
Description
3MTM ScotchcalTM General Purpose Film Series 50 are opaque, stabilised, calendered vinyl films offering an affordable solution for a wide range of signing and marking applications which do not require extended exterior performance life. The typical uses are exterior/interior markings requiring a medium term durability such as vehicle markings, signs, window and display graphics. These films are intended for applications to flat surfaces without rivets.
Limitations of End Uses
The following uses and applications are specifically NOT warranted.
 Application to corrugated surfaces
 Application to compound curved surfaces (A compound curve is one in which the film is stretched in two directions over a sharp angle.)
 Exposure to petroleum products or solvents
 Graphics for automotive Original Equipment Manufacturers (OEM): 3M Commercial Graphics Division products are not tested against automotive manufacturers’ specifications.
Compatible Products
 Selected 3M Premasking and Prespacing Tapes
 3MTM Screen Printing Ink Series 1900
 3MTM Screen Printing Ink Series 9700UV
Product Line Product Line Colours
Screen Printable films
Number/Colour Removable Adhesive
SP50R-10 White
SP50R-Transparent
Self-Coloured films
Number/Colour Number/Colour
50-11 Transparent 50-792 Aqua
50-24 Lemon Yellow 50-795 Dark Aqua 50-25 Bright Yellow 50-79 Teal
50-265 Yellow 50-81 Soft Blue 50-275 Sunflower 50-83 Pastel Blue 50-28 Apricot 50-834 Sky Blue
50-32 Orange 50-84 Azure Blue 50-34 Bright Orange 50-862 Vivid Blue 50-42 Bright Red 50-87 Brilliant Blue 50-445 Light Red 50-88 Sapphire Blue 50-465 Tomato Red 50-884 Marine Blue 50-473 Cardinal Red 50-90 Deep Navy Blue 50-48 Red 50-905 Insigna Blue 50-485 Dark Red 50-917 Dark Sahara 50-486 Deep Red 50-918 Med. Brown 50-49 Burgundy 50-92 Brown
50-475 Medium Red 50-914 Beige
50-62 Light Magenta 50-912 Fawn
50-63 Magenta 50-91 Ivory
50-64 Pink 50-10 White
50-66 Purple 50-100 Matt White 50-65 Lavender 50-93 Grey White 50-72 Light Green 50-94 Light Grey 50-73 Grass Green 50-96 Grey
50-74 Green 50-97 Nimbus Grey 50-76 Med. Green 50-12 Black
50-77 Leaf Green 50-120 Matt Black 50-78 Dark Green 50-58 Aluminum 50-745 Bright Green 50-54 Gold
50-82 Light Blue 50-585 Anthracite
Page 1 of 4
Number/Colour
Permanent Adhesive
SP50-10 White
SP50-11 Transparent
UK190514
Product Bulletin 50
CAUTION
When using any equipment, always follow the manufacturers’ instructions for safe operation.
Property
Description
Thickness of film only
0.75mm +/- 10 % variation
Thickness of film and adhesive (ISO 4593)
0.09 – 0.1 mm
Adhesive
Series 50 Series SP50
Permanent, pressure sensitive
Adhesive
SP50R
Removable, pressure sensitive
Adhesive colour
Clear
Liner
Series 50
Series SP50 and SP50R
Kraft paper / 137 g/m2 One-sided PE coated Kraft paper/ 147 g/m2
Application substrate
Automotive paints, glass, acrylic, aluminum, painted steel
Minimum application temperature (air, film, substrate)*
 8 °C
*For applications nearing the minimum temperature range, please contact your local technical service representative to confirm suitability of application
Note: The ISO number refers to standards of the International Standards Organisation.
Effective Performance Life
The effective performance life for 3MTM ScotchcalTM General Purpose Film Series 50 is based on field experience and exposure tests conducted throughout Europe. When the graphics are processed and used according to 3M recommendations, they should have the performance life shown in the charts below. The actual performance depends on the:
Prespacing Tape
Premasking Tape
Unprinted
SCPS-100
SCPM-19
Printed
Series 1900 inks Series 9700 inks
SCPS-100 SCPS-2
SCPM-19 SCPS-100
 Selection and preparation of the substrate
 Application methods
 Exposure conditions
 Cleaning methods
Vertical Exposure
Zone 1: Zone 2: Zone 3:
Northern and Central Europe Mediterranean Europe
Northern Africa and Middle East
Unprinted
Zone 1
Zone 2
Zone 3
Black/white
Durability
7 years
5 years
4 years
3MTM MCSTM Warranty
5 years
4 years
3 years
Colours
Durability
5 years
4 years
3 years
3MTM MCSTM Warranty
5 years
4 years
3 years
Metallic
Durability
4 years
3 years
2 years
3MTM MCSTM Warranty
3 years
2 years
2 years
SP 50 and SP 50R printed with ink series 1900 and 9700
3MMCS Warranty
3 years
2 years
1 years
UK190514
Product Bulletin 50
Page 2 of 4
The products refered on this page are;
3MTM Screen Printing Ink Series 1900 3MTM Screen Printing Ink Series 9700UV 3MTM Prespace Tape SCPS-2
3MTM Prespace Tape SCPS-100
3MTM Premask Tape SCPM-19
21


TECHNICAL DATA | POLYCARBONATE & ACRYLIC PERSPEX & LEXAN
Perspex is acrylic brand know worldwide associated with quality, shows the temperatures it can stand and its BS standard numbers
Lexan is the biggest name in polycarbonate, this sheet shows that it can be drilled, sawn & bent.
WORKING ON THE NEXT BIG THING...
Typical Physical Properties PERSPEX® Cast Acrylic
Property Test Method Conditions Units Value
Physical
Relative Density ISO 1183 g/cm3 1.19
Water Absorption ISO 62 % 0.2
Mechanical
Tensile Strength at yield ISO 527 5mm/min MPa 75
Tensile Strength at break
Elongation at yield
Elongation at break ISO 527 5mm/min % 4
Tensile Modulus of Elasticity
Flexural Modulus ISO 178 2mm/min MPa 3210
Flexural Strength at yield ISO 178 2mm/min MPa 116
Izod Impact Strength ISO 180/1A notched kJm-2 N/A
Charpy Impact Strength ISO 179 unnotched kJm-2 12
Impact Falling Weight
Rockwell Hardness ISO 2039-2 M Scale 102
Thermal
Service Temperature
Heat Distortion Temperature
Vicat Softening Temperature ISO 306 ˚C >110
Coefficient of Thermal Expansion ASTM D-696 mm/m°C 0.077
Thermal Conductivity
Specific Heat Capacity
Optical
Light Transmission ASTM D-1003 3mm sheet % >92
Refractive Index ISO 489/A 1.49
Yellowness Index
Haze
Electrical
Dielectric Strength IEC 243 kV/mm-1 15
Surface Resistivity IEC 93 Ω m-2 >1014
Other physical properties and values available on request.
Flammability:
PERSPEX® is a combustible material and if ignited will continue to burn. However, unlike many other plastic materials, burning PERSPEX®produces very little smoke, an important fire safety benefit.
Standard
Classification
BS 476 Part 7
Class 3
UL 94
HB
NFP 92-307
M4 (without drips)
Product Data
GE Structured Products
Lexan® 9030 sheet
Description
All Lexan transparent sheet products are extruded of Lexan Polycarbonate resin with Physical, Thermal, Mechanical and Electrical properties as listed in the table. Lexan® 9030 sheet is the standard grade of Lexan sheet without UV protected nor Mar resistant surface treatment. As all Lexan sheet grades, Lexan 9030 sheet combines high impact and temperature resistance with optical clarity.
Lexan 9030 sheet can be utilised for secondary glazing behind existing glazing for economical protection against breakage or intrusion.
Lexan 9030 sheet can be cut, sawn, drill, milling and bent easily using standard workshop equipment without the risk of cracking and breakage and is therefor ideally suited for fabricating a wide range of indoor applications such as machine guards etc.
Lexan 9030 sheet can be easily thermoformed into complex parts while retaining its excellent properties necessary for demanding applications such as vandal proof street furniture.
Lexan 9030 sheet may be decorated using a wide variety of modern techniques such as painting and screen printing.
Product availability
Lexan 9030 sheet is supplied in the following standard specifications:
Standard Sizes Masking
Thin gauge in mm 0.75*-1-1.5
Standard Colors
transparent code 112 and opal white code 82103
Lexan 9030 sheet can be supplied by prior arrangements in non - standard widths, lengths and colour. Such arrangements may affect prices, terms and/or other conditions of sales.
Light transmission
Transparent Lexan 9030 sheet have excellent light transmission, dependent of thickness between 84 - 87%.
625 x 1250*
1250 x 1250
Bottom Side:
Standard gauge in mm 2-3-4-5-6-8-9.5-12
2050 x 3050
2050 x 6050
Bottom Side:
*Dimensions only for 0.75 mm
Top side: Coex opal white PE blue print
Coex transparent PE
Top side: Coex opal white PE blue print
Coex transparent PE
22


WORKING ON THE NEXT BIG THING...
TECHNICAL DATA | STAINLESS STEEL & ALUMINIUM INSPECTION CERTIFICATES
These are for use when the metal is inspected
for product quality, which determines it can be lasered, cnc cut, bent and will withstand the heat of the powder coating ovens. Every single piece of aluminium or steel has to be inspected before it can be imported into the country to be sold by our suppliers.
Potentially there could be material on the black market which is inferior and this could damage our machinery.
23


TECHNICAL DATA | PAINTS WORKING ON THE NEXT BIG THING... AKZONOBEL / CROMADEX & THERMASET
Akzonobel / Cromadex and Thermaset are the leading manufactrureres of paint. These technical data sheets show lifespans, and quality approved codes.
24


WORKING ON THE NEXT BIG THING...
TECHNICAL DATA | INKS ROLAND ECOSOL MAX INKS
Roland ecosol max inks are the branded inks to
use with our ROLAND print machines to keep
the warranty on the print heads, using there recommended branded products means we can get machines serviced by official ROLAND engineers instead of involving 3rd party engineers.
25


TECHNICAL DATA | BANNERS DPM/SEEME
Are the PVC’s that JMF Group use for banners & flex box skins, the data sheets show BS cert numbers and natural fibres DN numbers.
WORKING ON THE NEXT BIG THING...
Vision Coated 550 PVC
Technical Data Sheet Vision Coated 550 PVC
dpm digital print media

Produktdatenblatt
Product datasheet
seemee® Backlit Supreme - B7970
Matt coated white pvc for all types of banner and backdrop promotional print.
Width/Finish Base fabric Coating Total weight
Tensile strength
N/50mm (ave) BS.3424/6B
Tear Strength N (ave)
Avaiable up to 3200cm wide / Superfine finish 1100 d/tex high tenacity polyester
Flexible plasticised PVC applied to both sides
Faserstoff des Trägergewebes
support cloth
tissu
natura del supporto
Beschichtungsart
type of coating
nature de l`enduit natura della spalmatura
Flächengewicht
total weight masse totale peso totale
Breite
width largeur larghezza
Reißkraft K/S
tensile strength warp/weft
resistance a la traction en chaine/en trame resistenza alla trazione ordito/trama
Anwendungsbereich
intended use
Brandverhalten
flame retardant according to
DIN 60001
DIN EN ISO 2286-2
DIN EN ISO 2286-1
DIN EN ISO 1421
DIN 4102
PES
PVC
450 g/m2
320 / 500 cm
3000 / 3000 N/5cm
Backlit advertisements (both sides printable)
B1
BS.3424/7B Coating adhesion
N/50mm
Cold crack
Fire Retardancy
BS.3424/9B BS.3424/10
20 YEARS
1993 - 2013
Digital Print Media, The Heights, Ibstone Road, Stokenchurch, Bucks, HP14 3BG T : 01494 760 240 E : [email protected] W : www.dpm.com
550g/ m2 +/- 25g/m2
warp 2000 weft 1500
warp 300 weft 200
90 -25oc
DIN 75200
BS.3424/5A
DPM, Digital Print Media & Frieze Frames are trading names of Roseash Ltd. Registered in England 2920080
VAT GB 645 5703 29
26
Haftungsausschluss: Änderungen, die dem technischen Fortschritt dienen, behalten wir uns vor. Werte ohne Toleranzangaben sind Nennwerte mit einer Toleranz von ± 5%. Die Angaben entsprechen unserem heutigen Kenntnisstand und sollen ohne Rechtsverbindlichkeit informieren.
Disclaimer: We reserve modifications of the mentioned values for technical reasons. Values without tolerance statements are values with a tolerance of ± 5%. The information corresponds with our latest knowledge and is offered without liability.
Version 1.2 (14.02.2014)


WORKING ON THE NEXT BIG THING...
TECHNICAL DATA | EXTRUSIONS SIGNCOMP
Signcomp is the biggest name in FLEXBOX EXTRSUIONS, imported from the United States of America. The technical data sheet shows cross section of how it works and of how it is constructed.
27


TECHNICAL DATA | FIXINGS WORKING ON THE NEXT BIG THING... FK MOORE
FK Moore manufacture the fixings that JMF Group use. For example brass locators & plastic locators.
28


Digital printing
Displays
Exhibits
Hanging signs
Applications
Exhibitions
More than just an ACM: DIBOND® from 3A COMPOSITES combines excellent new product features resulting from extensive R & D programs. We invest in the development of innovative surface solutions and we work continuously on new fabrication techniques. That is why DIBOND® provides great creative potential for any 3D applications.
DIBOND® - unlimited potential for all your creative ideas.
Combining innovative materials.
DIBOND® combines 0.3 mm Aluminium layers on both sides with a Polyethylene core. The light weight sheet material can be transformed three dimensionally by using the routing and folding technique but it is stiff and stable at the same time - ideal for indoor as well as outdoor applications. The original was developed by the market leader 3A COMPOSITES.
We count on integrated production processes and innovative products “Made in Germany”. All production steps – fabrication of the cover layers, coating, laminating, quality control - are bundled at our production site in Singen. This is how we can guarantee first class raw materials and high quality products – which is crucial for the later processing, application and usability of the product.
Moreover we aim at offering the maximum possibilities regarding combination and creativity with our material towards our customers. Therefore we offer DIBOND® in an extraordinary range of colours and surfaces: front and reverse side are either stove lacquered with white or coloured surfaces, available in matt or high gloss, brushed or anodised, or even with a mirror-like or wood décor.
The unique alloy - AlMg1.
3A COMPOSITES is the only manufacturer using an AlMg1 alloy for the DIBOND® cover layers. Your advantages:
 sturdy material
 especially for 3D applications by using
the routing and folding technique  excellent processing characteristics  advanced corrosion resistance
The special Polyester coating system.
 stove lacquered according to ECCA - Standards
 constantly high quality of colour as well as colour consistency  only in-house lacquering at the 3A COMPOSITES site in Singen  very even, flat surfaces
 perfect printing properties
 no heavy metals in the lacquer system
 conforms to RoHS, REACH and WEEE
The black core. UV-Blocker.
The two aluminium layers enclose a black polyethylene core.
Your advantages:
 UV-protection
 material stability caused by the black core  excellent long term application outdoors
Protective foil on both sides
0.3 mm aluminum surface layers
Polyethylene core
The impressive indoor
all-round board
FOAM-X® is a lightweight foam board with a polyurethane foam core and coated multi-layered paper liners. FOAM-X® is suitable for indoor applications. The material provides an ideal weight-stability-ratio. Additionally, FOAM-X® can be processed very easily with manual tools.
FOAM-X® is particularly suitable for short-term indoor usage. Hanging signs
PoS/PoP applications
Window displays
 Photomounting
 Modelling
Decoration and picture frames
Foam board structure
Processing options
 Digital printing
 Screen printing
 Gluing (High resistance to solvent-based glues and paints
 Cutting/Die cutting / Plotting
Standard formats
Formats
Thickness
WORKING ON THE NEXT BIG THING...
TECHNICAL DATA | BOARDS FOAM-X & DIBOND
Two gloablly-recognised and reputable brands of materials. Data sheets showing uses of and construction of the two materials in question.
DIBOND®
DIBOND® IS, WHAT YOU MAKE OF IT. IN ALL DIMENSIONS.
© 3A Composites GmbH FOAM-X® 05/2017 EN
 Punching
 Folding / Constructive forms
 Mounting / Laminating (For best results we recommend double-sided lamination)
3A Composites GmbH
49090 Osnabrück, Germany
Tel +49 (0) 541-121 93 79
Fax +49(0)541-1219393 [email protected] www.foam-x.eu
Coated multilayered recycled paper liners
Polyurethane foam core
500 x 700 mm
1.000 x 700 mm 1.000 x 1.400 mm 1.016 x 1.524 mm 2.440 x 1.220 mm 3.000 x 1.400 mm 3.050 x 1.530 mm 3.050 x 2.030 mm
40 24
40 24 24 12 40 24 24 12 40 24
24 12 24 12 16 8 16 8
mm 3 5 10
All formats are standard formats ex works. Your local distributor can cut boards to size according to your needs.
Colours
Black
White
Number of sheets in one box
4
29


TECHNICAL DATA | LED MODULES GE TETRA MAX
GE TETRA MAX LED modules are used on JMF Group’s illuminated flex faces and halo-lit 3D built-up lettering. The technical data sheet shows brightness, energy consumption, power supply loading. The technical data sheet also illustrates the breakdown of the LED modules to show how they can be used and how they are constructed.
WORKING ON THE NEXT BIG THING...
30


INSTALLATION?
WE HAVE IT COVERED.
Nationwide Experts
Our qualified installation teams are happy to work right across the UK.
Free Site Surveys
As part of our comprehensive service, we provide all essential site surveys and drawings free of charge. Our fitting engineers comply fully with PASMA, IPAF and CSCS accreditations.
MAINTENANCE
LOOKING AFTER YOUR INVESTMENT
Our signage maintenance contract is designed to help protect and extend the life of your external fascia, and therefore ensures your display stays looking and performing as good as new. The package includes scheduled visits from skilled engineers who will clean fascia signage and check all electrical components, replacing anything which needs attention.
WORWKOINRKGINOGNOTNHTEHENNEEXXTTBIIG THIING....
SECTION DINESTCARLILPATTOIRON
31 31


Trustee of
0191 488 2011
[email protected] www.jmf-group.co.uk
SANDS INDUSTRIAL ESTATE, SWALWELL, NEWCASTLE UPON TYNE, TYNE AND WEAR, NE16 3DJ UNIT 5 HEAD OFFICE & ACCOUNTS | UNIT 6 SIGNAGE & MANUFACTURE | UNIT 13 LOGISTICS | UNIT 14 ASSEMBLY
www.brightred.org.uk
Effective: 19 FEB 2019
B
E
L
R
A
T
E
I
N
C
G
9
1
0
2
-
1
9
8
9