Marble polishing procedure entails 3 important stages

“Insights to the process of marble polishing.”

Marble is attractive to look at specifically on the floors, and it verifies
to be a popular choice for a great number of homes. One can improve
the sophisticated look of their interiors by making proper flooring
choices. Nevertheless, the normal lustier, as well as the beauty of the
marble, can vanish with time as a result of scratches and abrasions, dirt
and spills if not properly cared for, consequently leading to further
damages. The expensive look of the marble can vanish away mainly
because marbles are prone to grazes and scratches. You can keep the
harm at bay by getting the regular marble polishing and buffing.
Trust the Pros for a Shiny Marble Floor:
For the best results, invest in a professional marble refurbishment
process to maintain the aesthetics of the marble floor.

• Grinding: To carry out the marble refurbishment, the
professional services start with the grinding step. Sanding or
grinding the marble is easy yet a time-consuming procedure.
Knowing how to do to polish hand cut and rough edges to make
the marble job shine. Sanding is a very aggressive process using

the diamond dust induced discs or grits to remove deep scratches
and lippage. It is typically performed by using a heavily weighted
floor polishing machine with water. Furthermore, this process is
naturally dust free, and the goal is to polish the floors.

Honing: This procedure is
similar to grinding, but not
as aggressive as that. The
discs or pads are not as
rough as those used in
grinding and honing will
remove minor to moderate
scratches and etch marks.
Honing is a process where
the diamond elements are rubbed over the surface to shed a small
amount of stone. In the process, they remove scratches and entrenched
soil. A honed finish can be mentioned to a satin smooth surface with
comparatively little light reflection.

• Polishing: This is done after the honing stage, and a series of
higher diamond pads are used. The polishing process is sure to
give a shining effect to the marble floor, and industrial diamonds
do it, but smaller graded than that of honing. For marble floors in
good condition a polishing can be enough to bring back the shine.

• Crystallisation: This is another method of marble floor finishing
which improves the marble surfaces. It causes a chemical reaction
on the surface, with Novamarmol Powder and Liquid and steel
wool which allows the crystallisation of the marble.

These steps are done in a normal marble polishing process. These allow
the marble floors to shine and still not be slippery. The procedure when
done by a professional team, will guarantee that the process is done

adequately. If not, a lot of risks can be involved, if proper training is
not gained to do the same.