Thermoplastic Tubing - LSR Distribuidor

Thermoplastic Tubing Hydraulic &
Table of Contents Pneumatic
Hose & Fit.
Thermoplastic Tubing
PTFE
Thermoplastic Tutorial and Information.................................................. 170-171 Hose &
Tubing Pressure Ranges.................................................................................172 Fittings
Polyethylene ........................................................................................... 173-176
Nylon ...................................................................................................... 177-180 Thermoplastic
Polypropylene.................................................................................................181 Tubing
Polyurethane .......................................................................................... 182-186
Clear Vinyl.......................................................................................................187 ThermoplasticFittings
Burst Pressure/Temperature Charts ....................................................... 188-190
Coiled Air Hose,Fittings& Accessories
LSR Distribuidor
Glorias No. 4 Col. San Rafael Chamapa
Tel 0155 5300 7008 / 5300 4245

Truck (Fleet)
Products

Tooling &
Equipment

Hose
Accessories

Technical &
Design

Information

Approvals &
Guides

DIMENSIONS ARE FOR REFERENCE ONLY. SUBJECT TO CHANGE. Alpha-
numeric
(+) Non Standard. See page ii for information on non-standard products.
Index
169 Parker Hannifin Corporation
Parflex Division
Ravenna, Ohio

Hydraulic & Thermoplastic Tubing Tutorial & Introduction
Pneumatic
Hose & Fit.

PTFE Parflex Thermoplastic Tubing Tutorial
Hose &
Fittings • Review the general attributes of our thermoplastic tubing that follows- this provides an excellent over-
view for all of thermoplastic tubing in our product line
Thermoplastic
Tubing • Review the symbols pages- this will help clear up any questions you may have on the product tables
within this section
Coiled Air Hose, ThermoplasticFittings
• The market/applications table identifies and provides a “good fit” summary
Fittings& Accessories • Review the pressure bar graph provided- this shows relative pressure ratings for the entire line of

Truck (Fleet) thermoplastic tubing
Products • Review the STAMPED guide (Size, Temperature, Media, Application, Pressure, End Configuration,

Tooling & and Delivered Preferences) on page 171 to help narrow your search for the desired product
Equipment • Specific nomenclature, features, advantages, and benefits can be found at the

Hose beginning page of each product line
Accessories
Plastic Fittings tutorial and visual index starts on page……
Technical &
Design • All Plastic tubing dimensions are laser monitored to ensure an overall quality product
• Most Tubing sizes are packaged in convenient 100 ft., 250 ft., 500 ft. and 1,000 ft lengths
Information
Polyethylene Tubing
Approvals &
Guides • Parflex polyethylene tubing meets FDA, NSF Standard 51 for all food contact applications and NSF-61
for potable water applications

• Our E-Series tubing is made of 100% virgin resin material
• Polyethylene tubing meets ASTM D-1693 for stress crack resistance
• We also offer special PE tubing: FRPE (flame retardant & plenum rated) as well as HDPE (high density)

Nylon Tubing

• Flexible Nylon tubing use high grade resins for strength and flexibility for routing in tight spaces
• Semirigid high strength Nylon use high grade resins without the addition of plasticizers for higher

pressure tubing applications
• Pure Air Tubing (PAT) is the tubing choice for pure air systems (Semiconductor) due to its cleanliness in

addition to excellent chemical and UV light resistance

Polypropylene

• Polypropylene tubing meets FDA, NSF Standard 51 for all food contact applications
• Polypropylene tubing exhibits excellent chemical resistance to chlorinated water applications
• Polypropylene tubing is commonly used in outdoor applications where UV light stabilization is required

Polyurethane

• Polyurethane tubing is a flexible, kink resistant and abrasion resistant material commonly used in
Pneumatic applications

• Polyurethane is available in multiple transparent and opaque colors for system color coding
• Polyurethane is available in the following durometers (measurement of material hardness):

• Low Durometer (85-most flexible, very soft)
• Medium Durometer (90-less flexible)
• High Durometer (>95-least flexible, highest pressures)

Polyvinyl Chloride (PVC)

• PVC tubing is made from 100% virgin resin material and Meets all FDA specifications for materials in
contact with food and drugs

• PVC tubing is very flexible (70 Durometer) tubing that is crystal clear and is Ideal for situations where
visible fluid flow is necessary (i.e. sight gages for tank identification)

Alpha- 170 Parker Hannifin Corporation
numeric Parflex Division
Ravenna, Ohio
Index

Thermoplastic Tubing Tutorial & Introduction Hydraulic &
Pneumatic
Hose & Fit.

Product Family Series Suggested Markets and Applications

E and EB Potable water, chemical transfer, and low cost, low pressure pneumatics, NSF- PTFE
PE 51 & NSF- 61 Hose &
Fittings
FRPE Low cost, low pressure pneumatics, NSF-51
Polyethylene
Pneumatic controls in HVAC/plenum space (UL 1820), Dubl-Barb fitting from
Parker Brass Thermoplastic
Tubing
High Density Polyethylene HDPE Chemical transfer and low cost pneumatics

N Pneumatic and petroleum-based chemical transfer

Nylon PAT Pure air and gas distribution systems, Semiconductor Thermoplastic

NR High pressure pneumatic, lubrication, and Marine control systems Fittings

Polypropylene PP and PPB Food contact and chemical transfer applications, chlorinated water, NSF-51

U and UM Pneumatic controls requiring high flexibility, kink resistance and movement

Urethane HU and HUM High pressure pneumatics requiring flexibility and kink resistance, Robotics Coiled Air Hose, & Accessories
LU
Low pressure pneumatics requiring extreme flexibility and kink resistance, Fittings
Pneumatic Logic Boards

Vinyl PV Low pressure chemical and medical applications requiring high clarity and
flexibility, FDA

Add caveat for ordering Series EB and Series PPB NSF tubing with “-NSF” suffix

Truck (Fleet)
Products

How To Select Thermoplastic Tubing (STAMPED) Tooling &
Equipment

Size Chose appropriate outside diameters - tubing is always measured Hose
on the OD Accessories

Temperature The maximum temperature of the material being conveyed

Application External conditions including abrasion, climate, heat, flexing, Technical &
crushing, kinking, and degrees of bending Design

Media The composition of the substance being conveyed and Information
chemical compatibility with the tubing

Pressure The maximum pressure of the system, including pressure spikes

Ends The appropriate end connection (barb, push to connect, Approvals &
compression) Guides

Delivery Testing, quality, packaging, and delivery requirements

171 Parker Hannifin Corporation Alpha-
Parflex Division numeric
Ravenna, Ohio
Index

Alpha- Approvals & Technical & Hose Tooling & Truck (Fleet) Coiled Air Hose, Thermoplastic Thermoplastic PTFE Hydraulic &
numeric Guides Design Accessories Equipment Products Fittings Fittings Tubing Hose & Pneumatic
& Accessories Fittings Hose & Fit.
Index Information

Note: Working pressures are at 73°F (23°C). Pressure ratings are also effected by diameter of tubing and wall thickness. Pressure (psi)
Actual performance may vary with different media and working conditions. Use this information for comparison only.
172 PolPyoulryeuthreatnheaPnHPoeioglMyPPlPhyuooeoeDrlldlteyyPNyhu.tueouyhyrDtrolrlhlaeyoueemnytennrthlehotNeeehaMamtynMnyeMCnleeeleroeeelettednrFMNnHetLiarilcreyeuiPaNiorgcltMmm(PuwHyoVrh9(irolenieic6.oegDDDn5lt.ynrSRh(2-yuuuAi12ec-eleFrrrDi283tooomTrshl(...ee96m5mm4ui(yisnPxrblbbbbeeetiesiAaigbaatattannieeenTtilrrrrgdeyerrrt))))) Tubing Pressure Ranges

Parker Hannifin Corporation Tubing Pressure Ranges
Parflex Division 900
Ravenna, Ohio 800
700
600
500
400
300
200
100

0

Polyethylene Tubing Hydraulic &
Pneumatic
Hose & Fit.

Polyethylene Tubing PTFE
Hose &
Series E: Instrument Grade—FDA, NSF Listed Fittings
Series EB: Ultraviolet Light Resistant

• FDA, NSF-51 and NSF-61 compliant black polyethylene tubing How to order Parflex polyethylene tubing Thermoplastic
is also available and is denoted with the letters "NSF" in the part Example: E-64-Y-0500 is 3/8" O.D. x .250" I.D. x 500' long. Tubing
number.
E – 6 4 – Y – 0500 Thermoplastic Fittings
• E series natural and colored tubing listed below meet FDA, Package Quantity
NSF-51 and NSF-61 requirements for food contact Color: i.e., yellow Coiled Air Hose,Fittings& Accessories
applications. Tube I. D. in sixteenths of an
inch
• Economical. Tube O.D. in sixteenths of an
• Resistant to environmental stress cracking. It greatly exceeds inch
Polyethylene
that of ordinary polyethylene tubing as measured by ASTM D-
1693 (10% IGEPAL). Fitting Recommendation:
• Black (EB) tubing contains an ultraviolet inhibitor which is
recommended for use in sunlit areas and in close proximity to • Parker TrueSeal™ fittings.
high ultraviolet light sources. • Parker Fast & Tite® fittings.
• Available in black as well as nine other colors, as recommended • A tube support can be used with this tubing for maximum
by the Instrument Society of America.
• Chemically resistant and flexible. holding power where tensiling, vibration or pressure spikes
• Extruded from high molecular weight resin for increased may occur
dimensional stability, uniformity and long-term strength. • Parker Brass Fittings available from
• All tubing conforms to ASTM D-1248, Type I, Class A, Category
4, Grade E5. Brass Products Division
• The recommended operating temperature range for service Otsego, Michigan
at rated pressures with compatible fluids is -80°F (-62°C) to Phone (616) 694-9411
+150°F (+66°C).

Min. Truck (Fleet)
Working Burst Min. Weight Products
Avg. Pressure Pressure Bend lbs.
Part I. D. O. D. Wall at 73°F at 73°F Reel Length Radius Per
Number Color* in. in. Thick PSI PSI ft.
in. 100 ft.

E-43-XXXX Natural 1/4 .170 .040 120 480 0100, 0500, 1000 1 1.1 Tooling &
E-43-X-XXXX R, B, O, Y, P, G, WHT, GRA 145 580 0100, 0500 1-1/8 2.1 Equipment
EB-43-XXXX 1-1/4 2.5
EB-43-XXXX-NSF Black 0100, 0500, 1000
Black NSF 0500, 1000 2-1/2 3.6
0100, 0500 4 4.6
E-53-XXXX Natural 5/16 .187 .062
EB-53-XXXX Black 0100, 0500

E-64-XXXX Natural 3/8 .250 .062 125 500 0100, 0500 Hose
E-64-X-XXXX R, B, O, Y, P, G, WHT, GRA Accessories
EB-64-XXXX 0100
EB-64-XXXX-NSF Black
Black NSF

E-86-XXXX Natural 1/2 .375 .062 90 360 Technical &
E-86-X-XXXX WHT, GRA 5/8 .500 .062 70 280 Design
EB-86-XXXX
EB-86-XXXX-NSF Black Information
Black NSF
E-108-XXXX
EB-108-XXXX Natural
Black

*Color Code: R = red, B = blue, O = orange, Y = yellow, P = purple, G = green, WHT = white, GRA = gray.
Standard black is not NSF approved.

Approvals &
Guides

173 Parker Hannifin Corporation Alpha-
Parflex Division numeric
Ravenna, Ohio
Index

Hydraulic & Polyethylene Tubing
Pneumatic
Hose & Fit.

PTFE Polyethylene Tubing “Poly-Flo®”
Hose &
Fittings Series PE: Pneumatic, Industrial Grade

Thermoplastic • Economical, industrial grade How to order Poly-Flo polyethylene tubing
Tubing • Limited stress crack resistance. Not recommended for residen- Example: PE-6-062-YL-0500 is 3/8" O.D. x 0.062" wall x 500' long.

Coiled Air Hose, ThermoplasticFittings tial water systems. PE – 6 – 062 – YL – 0500
• NSF-51 listed (excludes black) Package Quantity
• Withstands more than 500 hours of Igepal solution Color: yellow
• ASTM D 1248 classification: Wall thickness in thousandths
of an inch
Natural: Type 1, Class A, Category 3 Tube O.D. in sixteenths of an
Colors: Type 1, Class B, Category 3 inch
• The recommended operating temperature range for service at Polyethylene
rated pressures with compatible fluids is
-80°F (-62°C) to +175°F (+79°C). Pressure ratings are lower at Fitting Recommendation:
elevated temperatures.
• Parker TrueSeal™ fittings.
Fittings& Accessories • Parker Fast & Tite® fittings.
• A tube support can be used with this tubing for maximum

holding power where tensiling, vibration or pressure spikes
may occur
• Parker Brass Fittings available from

Brass Products Division
Otsego, Michigan
Phone (616) 694-9411

Truck (Fleet) Min. Min. Weight
Products Working Burst
Avg. Pressure Pressure Bend lbs.
Part I. D. O. D. Wall at 73°F at 73°F Package Radius Per
Number Color* in. in. Thick PSI PSI ft. in. 100 ft.

Tooling & PE-2-020-XX-1000 NA, BK 1/8 .085 .020 125 500 1000 .500 29
Equipment 125 .44
PE-2.5-025-XX-1000 NA, BK 5/32 .106 .025 125 500 1000 .625 .65

PE-3-030-XX-100 NA, BK 3/16 .127 .030 100 500 1000 .750 1.10

PE-4-040-XX-1000 NA, BK 1/4 .170 .040 150 1000 2.13
PE-4-040-XX-0500 BL, RD, GN, OR, PR, GY, YL 87 400 500 1.000 2.50
Hose PE-4-040-XX-0200 NA, BK, BL, RD, GN, OR, PR, GY, YL
Accessories 200 3.40

PE-5-062-XX-0500 NA, BK 5/16 .188 .062 600 500 1.125

PE-6-062-XX-0500 NA, BK, BL, RD, GN, OR, PR, GY, YL 3/8 .251 .062 350 500 1.250
PE-6-062-XX-0500 NA, BK 200

PE-8-062-XX-0500 NA, BK, WH, BL 1/2 .376 .062 62 250 250 2.500
PE-8-062-XX-0500 NA, BK 100

Technical & XX = Product Color
Design *Color Code: NA – Natural, BK – Black, BL – Blue, RD – Red, GN – Green, OR – Orange, PR – Purple, GY – Gray, YL – Yellow, WH – White.

Information

Approvals &
Guides

Alpha- Note: Working pressure and burst pressure are at 73°F (23°C). Burst data was obtained in carefully controlled test conditions. Use this information for
numeric comparison only. Actual performance may vary with different media and working conditions.

Index 174 Parker Hannifin Corporation
Parflex Division
Ravenna, Ohio

Polyethylene Tubing Hydraulic &
Pneumatic
Hose & Fit.

Metric Polyethylene Tubing PTFE
Hose &
Series E: Instrument Grade—FDA, NSF Listed Fittings
Series EB: Ultraviolet Light Resistant

Fitting Recommendation: How to order Parflex metric polyethylene tubing Thermoplastic
Example: E-8x1-0100 Tubing
• Parker TrueSeal™ fittings.
• Parker Fast & Tite® fittings. E – 8 x 1 – 0100
• A tube support can be used with this tubing for maximum
Package Quantity
holding power where tensiling, vibration or pressure spikes Tube Wall Thickness in millimeters
may occur Tube O. D. in millimeters
• Parker Metric Brass Fittings available from Metric Polyethylene

Brass Products Division Thermoplastic
Otsego, Michigan
Phone (616) 694-9411

Min. Weight Fittings
Working Burst Min. lbs.
Wall Pressure Pressure Bend Per
Part I. D. O. D. Thick at 23°C at 23°C Reel Length Radius
Number Color mm. mm. mm. bar bar ft. mm. 100 ft.
(kg.)

E-6X1-0100 Natural 6 4 1 8.6 34.5 100 25 1.3 Coiled Air Hose,Fittings& Accessories
EB-6X1-0100 Black 100 (.59)

E-8X1-0100 Natural 8 6 1 6.9 27.6 100 38 1.4
EB-8X1-0100 Black 100 (.64)

E-10X1.5-0100 Natural 10 7 1.5 8.6 34.5 100 38 2.6 Truck (Fleet)
EB-10X1.5-0100 Black 100 (1.18) Products

E-12X1.5-0100 Natural 12 9 1.5 6.2 24.8 100 63 3.2
EB-12X1.5-0100 Black 100 (1.45)

Tooling &
Equipment

Hose
Accessories

Technical &
Design

Information

Approvals &
Guides

175 Parker Hannifin Corporation Alpha-
Parflex Division numeric
Ravenna, Ohio
Index

Hydraulic & Polyethylene Tubing
Pneumatic
Hose & Fit.

PTFE Polyethylene Tubing
Hose &
Fittings Series FRPE: Flame Resistant

Using the same base linear low density polyethylene (LLDPE) Order by tubing part number and name
as the E-Series tubing, Parker Hannifin, Parflex Division's FRPE 1 FRPE 4 – RED 0500
tubing has the following advantages:
Package Quantity
Thermoplastic • Excellent stress crack resistance. Meets requirements set forth Tube O.D. in sixteenths of an in.
Tubing in ASTM D-1693. Polyethylene

• UL 1820 approved as well as UL 94 V-2. Flame resistant
1 — Single, 2 — Twin
• Can be installed in accordance with NFPA Standard 90A.

• Self-extinguishing properties coupled with low smoke density
characteristics.

• Numbering and color-coded striping system allow the installer
to identify up to 240 distinct circuits.

Coiled Air Hose, ThermoplasticFittings • Unique 3-stripe Part Color I. D. O. D. Avg. Working Min. Reel Min. Weight
tubing allows for Number in. in. Wall Pressure Burst Length Bend lbs.
easy identification Thick at 73°F Pressure Radius Per
during installation. 1FRPE2.5-0500 at 73°F ft.
1FRPE2.5-XXX PSI PSI in. 100 ft.
• The recommended 2FRPE2.5
Fittings& Accessories operating 1FRPE4-0250 Black 5/32 .096 .030 225 500 .053
temperature range 1FRPE4-0500 Stripe 1/4 900 500 1/2 1.26
for service at rated 1FRPE4-1000 Black 1.17
pressures with 1FRPE4-XXX 500
compatible fluids 2FRPE4 Black 2.34
in -85°F (-65°C) to Black 250
+150°F (+66°C). Black
Stripe 500
• Available single line Black
and twin line.

.170 .040 160 640 1000 3/4

Truck (Fleet) 250, 1000
Products
250

1FRPE6-0250 Black 250
1FRPE6-0500 Stripe
1FRPE6-XXX Black 3/8 .250 .062 195 780 500 1-1/2 2.71

250, 500

1FRPE8-0250 Black 1/2 .375 .062 135 540 250 1-3/4 3.80
1FRPE8-XXX Stripe 250

Tooling & Note: Twin tubing only available in black. Striped Tubing Color Options
Equipment -XXX denotes color. Refer to chart to the right.
Designation Color Designation Color Designation Color
Fitting Recommendation:
None Black -ORG Orange -GRN Green
• Parker Brass Compression Double Barb -RED White
-BLU Red -YEL Yellow -WHT Gray
• Parker Brass Fittings available from
Brass Products Division Blue -PUR Purple -GRY
Otsego, Michigan
Hose Phone (616) 694-9411
Accessories
Series HDPE: High Density Order by tubing part number and name.

• Manufactured from high strength, high density polyethylene. HD PE – 43 – 0500 Package Quantity
• Semirigid tubing that is inherently resistant to most chemicals, Tube O.D. in sixteenths of an
Technical & inch
Design less easily cut or damaged and has a higher burst pressure Polyethylene
rating than series E tubing. High density
Information • The recommended operating temperature range for service
at rated pressures with compatible fluids is -80°F (-62°C) to
+175°F (+80°C).

Approvals & Part Color I. D. O. D. Avg. Working Min. Reel Min. Weight
Guides Number in. in. Wall Pressure Burst Length Bend lbs.
Thick at 73°F Pressure Radius Per
at 73°F ft.
PSI PSI in. 100 ft.

HDPE-43-0250 Black 1/4 .170 .040 300 1200 250 1-1/2 1.1
HDPE-43-0500 Black 3/8 .250 .062 300 1200 500

HDPE-64-0250 Black 176 250 2-1/2 2.5
HDPE-64-0500 Black 500
Alpha-
numeric Parker Hannifin Corporation
Parflex Division
Index Ravenna, Ohio

Nylon Tubing Hydraulic &
Pneumatic
Hose & Fit.

Nylon Tubing Order by tubing part number and name PTFE
Hose &
Series N: Flexible N N – 2 – 016 – RED – 0100 Fittings

• Made from high-grade, abrasion resistant, heat and light Package Quantity (omit for Thermoplastic
stabilized nylon. 250 ft. reel length) Tubing
Colors (except natural and
• Resistance to stress cracking greatly exceeds that of ordinary black) ThermoplasticFittings
nylon tubing. Wall thickness in thou-
sandths of an inch
• Exhibits extremely low level water absorption. Tube O. D. in sixteenths of
• Chemically resistant. an inch
• Better flexibility, lighter weight and better resistance to flexural Color, natural or black (omit
for RED, GRN, BLU, YEL)
fatigue. Nylon
• The recommended operating temperature range for service
Fitting Recommendations:
at rated pressures with compatible fluids, depending upon
conditions, is -65°F (-54°C) to +200°F (+93°C) continuous. • Parker TrueSeal™ fittings.**
• Available in natural (NN), red (RED), green (GRN), blue (BLU), • Parker Fast & Tite® fittings.**
yellow (YEL), and black (NB). • Parker Brass Fittings available from:
• Black tubing is recommended for use outdoors and in sunlit
areas. Brass Products Division
Otsego, Michigan
Phone (616) 694-9411
**Verify fitting working pressure meets application requirements.

Part Color Nom. Nom. Avg. Working Min. Std. Min. Weight Coiled Air Hose,Fittings& Accessories
Number Tube Tube Wall Pressure Burst Reel Bend lbs.
I. D. O. D. Thick at 73°F Pressure Length Radius Per
in. in. at 73°F ft.
PSI PSI in. 100 ft.

NN-2-016 Natural 1/8 .093 .016 250 1000 100, 250 1/4 0.25 Truck (Fleet)
NB-2-016 Black .031 500 2000 0.42 Products
.025 300 1200 0.47
NN-2-031 Natural 1/8 .064 .025 250 1000 100, 250 1/4 0.58
NB-2-031 Black .046 500 2000 0./93
.035 250 1000 1.10
NN-2.5-025 Natural 5/32 .106 .040 310 1250 100, 250 1/2 1.20
NB-2.5-025 Black .062 500 2000 1.70
.040 250 1000 1.56
NN-3-025 Natural 3/16 .138 .050 250 1000 100, 250 5/8 2.34 Tooling &
NB-3-025 Black .093 500 2000 3.80 Equipment
.062 250 1000 3.94
NN-3-046 Natural 3/16 .096 .124 500 2000 100, 250 7/16 6.70
NB-3-046 Black

NN-4-035 Natural 1/4 .180 100, 250 7/8
NB-4-035 Black

NN-4-040 Natural 1/4 .170 100, 250 7/8 Hose
NB-4-040 Black Accessories

NN-4-062 Natural 1/4 .127 100, 250 1/2
NB-4-062 Black

NN-5-040 Natural 5/16 .233 100, 250 1-1/8
NB-5-040 Black

NN-6-050 Natural 3/8 .275 100, 250 1-1/8 Technical &
NB-6-050 Black Design

NN-6-093 Natural 3/8 .190 100, 250 3/4 Information
NB-6-093 Black

NN-8-062 Natural 1/2 .375 100, 250 1-1/4
NB-8-062 Black

NN-8-124 Natural 1/2 .253 100, 250 1
NB-8-124 Black
Approvals &
*Suggested working pressure is 1/4 of burst pressure. Guides
Metric part numbers on the following page.

177 Parker Hannifin Corporation Alpha-
Parflex Division numeric
Ravenna, Ohio
Index

Hydraulic & Metric Nylon Tubing
Pneumatic
Hose & Fit.

PTFE Metric Nylon Tubing Order by tubing part number and name
Hose &
Fittings Series N: Flexible N N 4 x .65 – BLU – 1000

Thermoplastic • Manufactured from our high standard, high-grade, abrasion Package Quantity (omit for
Tubing resistant, heat and light stabilized flexible nylon. standard reel length)
Color (omit for natural and black)
Coiled Air Hose, Thermoplastic • Metric nylon tubing has the same high chemical resistance Wall thickness in millimeters
and benefits of flexibility, light weight and resistance to Tube O. D. in millimeters
flexural fatigue as our standard nylon tubing. Color, Natural N, Black B (omit
for other colors)
• The recommended operating temperature range for service Nylon
at rated pressures with compatible fluids is -54°C (-65°F) to
Fittings 93°C (200°F) continuous.

& Accessories • Available in natural and black. Others colors available upon
request: green (GRN), red (RED), yellow (YEL), and blue
(BLU).

Fitting Recommendations:

• Parker metric fittings available from:
Tube Fittings Division
Columbus, Ohio
Phone (614) 279-7070

• Parker Metric Brass Fittings available from:
Brass Products Division
Otsego, Michigan
Phone (616) 694-9411

Fittings Nom. Nom. Avg. Working Min. Std. Min. Weight
Tube Tube Wall Pressure Burst Reel Bend lbs.
Part Color I. D. O. D. Thick at 23°C Pressure Length Radius Per
Number mm. mm. mm. at 23°C ft. (m) mm.
bar bar 100 ft.
(kg.)

Truck (Fleet) NN4X.65 Natural 4 2.7 0.65 17 68 100 14 .49
Products NB4X.65 Black 4.0 1.00 23.5 (30.5) (.22)
6.0 1.00 17
NN6X1 Natural 6 8.0 1.00 12.5 94 100 22 1.1
NB6X1 Black 10.0 1.00 11 (30.5) (.50)
11.0 1.50 15
Tooling & NN8X1 Natural 8 13.0 1.50 12.5 68 100 29 1.6
Equipment NB8X1 Black 15.0 1.50 10.5 (30.5) (.73)
17.0 1.50 9.5
NN10X1 Natural 10 50 100 34 2.0
NB10X1 Black (30.5) (.91)

NN12X1 Natural 12 44 100 45 2.4
NB12X1 Black (30.5) (1.1)

Hose NN14X1.5 Natural 14 60 100 57 4.2
Accessories NB14X1.5 Black (30.5) (1.9)

NN16X1.5 Natural 16 50 100 74 4.9
NB16X1.5 Black (30.5) (2.2)

NN18X1.5 Natural 18 42 100 92 5.5
NB18X1.5 Black (30.5) (2.5)

Technical & NN20X1.5 Natural 20 38 100 112 6.2
Design NB20X1.5 Black (30.5) (2.8)

Information To convert bar to PSI, multiply by 14.5.

Approvals &
Guides

Alpha- 178 Parker Hannifin Corporation
numeric Parflex Division
Ravenna, Ohio
Index

Nylon Pure Air Tubing Hydraulic &
Pneumatic
Hose & Fit.

Nylon Pure Air Tubing Order by tubing part number and name PTFE
Hose &
Series PAT: Ultra Pure, UV Resistant PAT 4 – BLK – 0250 Fittings
Package Quantity
• Manufactured from a specially formulated nylon for use in pure Colors (BLK, BRN, SIL) Thermoplastic
air and gas distribution systems. Tube O. D. in sixteenths of an inch Tubing
Pure Air Tubing
• Packaged on corrugated plastic reel with ends capped. ThermoplasticFittings
Shipped in a plastic-lined container. Fitting Recommendations:

• Offers excellent chemical resistance and ultraviolet light • Parker DAT series brass compression fittings.
resistance. • Parker Brass Fittings available from:

• Maintains good resistance to high ambient temperatures with Brass Products Division
low moisture absorption. Otsego, Michigan
Phone (616) 694-9411
• Provides high tensile strength with excellent coupling retention
in high-pressure, temperature and vibration environments. Coiled Air Hose,Fittings& Accessories

• Sizes 1/4" and smaller are single wall tubing having superior
heat and light resistance.

• Tubing sizes 3/8" O.D. and above are reinforced constructions
intended for gas distribution system connections where there is
no substantial movement between end couplings.

• The recommended operating temperature range for service
at rated pressures with compatible fluids is -40°F (-40°C) to
+200°F (+93°C).

• PAT tubing is rated for full vacuum service at 28 inch Hg.

• Available in black (BLK), brown (BRN), and silver (SIL).

Nylon Nom. Nom. Avg. Working Min. Std.** Min. Weight Truck (Fleet)
Part Tube Tube Wall Pressure Burst Reel Bend lbs. Products
Number I. D. O. D. Thick at 73°F Pressure Length Radius Per
in. in. in. at 73°F ft.
PSI PSI in. 100 ft.

PAT2 1/8 .079 .023 250 1000 1000 3/8 3.50
1000 1.0 12.41
PAT4 1/4 .170 .040 300 1200 500 1-1/0 28.22
500 2.0 39.54
PAT6 3/8 .251 .062 350 1400 250 2-1/2 70.21 Tooling &
250 3.0 87.23 Equipment
PAT8 1/2 .376 .062 235 950

PAT10 5/8 .441 .092 225 900

PAT12 3/4 .566 .092 200 800

*Suggested working pressure is 1/4 of burst pressure.
**Other reel lengths may be available. Contact the Parflex Division for details.

Hose
Accessories

Technical &
Design

Information

Approvals &
Guides

179 Parker Hannifin Corporation Alpha-
Parflex Division numeric
Ravenna, Ohio
Index

Hydraulic & Nylon Tubing
Pneumatic
Hose & Fit.

PTFE Nylon Tubing Order by tubing part number and name
Hose & N B R – 2 – 017 – 0100
Fittings Series NR: Semirigid High Strength
Package Quantity
Thermoplastic • Manufactured from a semirigid nylon material. The tubing does Wall thickness in thousandths of
Tubing not contain plasticizers. an inch
Tube O. D. in sixteenths of an inch
Coiled Air Hose, ThermoplasticFittings • Offers better chemical resistance than series N, good Rigid
resistance to high ambient temperature and low moisture Colors: Black
absorption. Nylon

• Has a high tensile strength which will give excellent coupling Fitting Recommendations:
retention in high-pressure, temperature and vibration
environments. • Parker TrueSeal™ fittings.
• Parker Fast & Tite® fittings.
• Specified for machine tool lubricating systems, marine control • Parker Brass Fittings available from:
systems, process lines for chemicals and oils, and other
applications requiring a high quality nylon tube. Brass Products Division
Otsego, Michigan
• NR and NBR tubing meets UL94HB flame resistance ratings in Phone (616) 694-9411
wall thicknesses of .033" and greater.

• The recommended operating temperature range for service
at rated pressures with compatible fluids is -60°F (-51°C) to
+200°F (+93°C).

Fittings& Accessories Part Color Nom. Nom. Avg. Working Min. Std. Min. Weight
Number Tube Tube Wall Pressure Burst Reel Bend lbs.
I. D. O. D. Thick at 73°F Pressure Length Radius Per
in. in. at 73°F ft.
PSI PSI in. 100 ft.

Truck (Fleet) NNR-2-017 Natural 1/8 .091 .017 425 1700 500 1/2 0.26
Products NBR-2-017 Black .026 625 2500
.024 425 1700
NNR-2-026 Natural 1/8 .073 .039 625 2500 500 3/8 0.36
NBR-2-026 Black .044 800 3200
.035 425 1700
NNR-3-024 Natural 3/16 .140 .050 625 2500 500 3/4 0.56
NBR-3-024 Black .040 425 1700
.048 425 1700
Tooling & NNR-3-039 Natural 3/16 .110 .075 625 2500 500 5/8 0.82
Equipment NBR-3-039 Black .062 375 1500
.075 625 2500
NNR-3-044 Natural 3/16 .100 500 5/8 0.88
NBR-3-044 Black

NNR-4-035 Natural 1/4 .180 250 1 1.10
NBR-4-035 Black

Hose NNR-4-050 Natural 1/4 .150 250 7/8 1.40
Accessories NBR-4-050 Black

NNR-5-040 Natural 5/16 .233 250 1-1/2 1.50
NBR-5-040 Black

NNR-6-048 Natural 3/8 .279 250 1-3/4 2.20
NBR-6-048 Black

NNR-6-075 Natural 3/8 .225 250 1-1/2 3.20
NBR-6-075 Black

Technical & NNR-8-062 Natural 1/2 .375 250 2-3/8 3.80
Design NBR-8-062 Black

Information NNR-8-075 Natural 1/2 .350 250 2-1/2 4.5
NBR-8-075 Black

* Suggested working pressure is 1/4 of burst pressure.

Approvals &
Guides

Alpha- NEW—Series NR nylon tubing is now available in 100 ft. bunch coil package lengths. To order, Parker Hannifin Corporation
numeric add suffix 0100 to part number. Example: NNR-4-035-0100 Parflex Division
Ravenna, Ohio
Index 180

Polypropylene Tubing Hydraulic &
Pneumatic
Hose & Fit.

Polypropylene Tubing PTFE
Hose &
Series PP: Laboratory Grade—FDA, NSF Listed Fittings
Series PPB: Ultraviolet Light Resistant

• Acid and chemically resistant. How to order Parflex polypropylene tubing
• Flexible. Example: PP-86-0250 is 1/2" O. D. x 3/8" I. D.
• Dimensionally stable.
• May be used at higher temperatures and working pressures PP – 8 6 – 0250 Thermoplastic
Tubing
than polyethylene tubing. Package Quantity
• Resistance to hot water and hot corrosive acids is excellent.
Tube I. D. in sixteenths of an inch
Polypropylene tubing will last many times longer than nylon Tube O. D. in sixteenths of an inch
tubing in hot water service. Polypropylene
• Has water absorption of less than .01%.
• Has good resistance to vegetable oils. Fitting Recommendations: ThermoplasticFittings
• Has excellent resistance to environmental stress cracking.
• Available in white, UV-resistant black and special NSF black. • Parker TrueSeal™ fittings. Coiled Air Hose,Fittings & Accessories
• PPB series tubing has superior ultraviolet resistance. • Parker Fast & Tite® fittings.
• White and NSF black polypropylene meet FDA and NSF-51 • A tube support can be used with this tubing for maximum
requirements for food contact and potable water.
• PP NSF listed only upon special request. holding power where tensiling, vibration or pressure spikes
• NSF black polypropylene tubing is available upon special may occur
request. Add -NSF suffix to PPB part number. • Parker Brass Fittings available from
• The recommended operating temperature range for service
at rated pressures with compatible fluids is 0°F (-18°C) to Brass Products Division
+200°F (+93°C). Otsego, Michigan
Phone (616) 694-9411

Part Color Nom. Nom. Avg. Working Min. Reel Min. Weight Truck (Fleet)
Number Tube Tube Wall Pressure Burst Length Bend lbs. Products
I. D. O. D. Thick at 73°F Pressure Radius Per
in. in. in. at 73°F ft.
PSI PSI in. 100 ft.

PP-21-1000 White 1/8 .080 .023 350 1400 1000 1/2 0.28 Tooling &
PPB-21-1000 Black 3/16 .120 .034 350 1400 500 3/4 0.62 Equipment
1/4 .170 .040 300 1200 500 1 1.01
PP-32-0500 White 5/16 .187 .062 350 1400 500 1-1/4 1.87 Hose
PPB-32-0500 Black 3/8 .250 .062 300 1200 500 1-1/4 2.35 Accessories
1/2 .375 .062 225 900 250 2-1/2 3.28
PP-43-0500 White 5/8 .500 .062 175 700 100 4 4.22
PPB-43-0500 Black

PP-53-0500 White
PPB-53-0500 Black

PP-64-0500 White
PPB-64-0500 Black

PP-86-0250 White
PPB-86-0250 Black

PP-108-0100 White
PPB-108-0100 Black

Technical &
Design

Information

Approvals &
Guides

181 Parker Hannifin Corporation Alpha-
Parflex Division numeric
Ravenna, Ohio
Index

Hydraulic & Polyurethane Tubing
Pneumatic
Hose & Fit.

PTFE Polyurethane Tubing Order by tubing part number and name
Hose & U – 2 1 – BLK – 0500
Fittings Series U: Polyether Base
Package Quantity
Thermoplastic • Medium durometer (90 to 95 Shore A). *Colors: Black
Tubing • The tubing is tough, strong, kink resistant and abrasion resistant. Tube I. D. in sixteenths of an in.
• Excellent hydrolytic stability. Tube O. D. in sixteenths of an in.
Coiled Air Hose, ThermoplasticFittings • Flexible and easy to assemble onto designated fittings. Polyurethane
• Broad temperature range.
& Accessories • Available in eight colors. Fitting Recommendations:
• High quality, precision made tubing used in a wide range of
• Parker TrueSeal™ fittings:
demanding and critical applications. A tube support should be used with this tubing, sizes -64 and
• Polyurethane occupies a unique position among polymers, sharing -86, for maximum fitting holding power.

the best properties of both rubber and plastic. Parflex Series U • Parker Fast & Tite® fittings:
tubing exhibits the elongation and recovery characteristics of Requires use of a tube support
rubber and the chemical resistance associated with plastics.
• Used for a wide variety of applications. Typical usage includes air • Parker polyurethane Fast-Stor® fittings.
tools, robotics, pneumatic logic and actuation systems, analytical • Parker Par-Barb fittings.
instrumentation, vacuum equipment, pressure measurement • Parker Brass Fittings including MicroLok fittings available from:
apparatus, semiconductor equipment manufacturers and a variety
of medical and laboratory applications. Brass Products Division
• The recommended operating temperature range for service Otsego, Michigan
at rated pressures with compatible fluids is -40°F (-40°C) to +180°F Phone (616) 694-9411
(+82°C).

Fittings Also available in coils

Truck (Fleet) Part Nom. Nom. Wall Working Min. Coil Weight
Products Number Tube Tube Thick Pressure Burst Length lbs.
I. D. O. D. at 73°F Pressure Per
in. in. in. at 73°F ft.
PSI PSI 100 ft.

U-21-0050 50
U-21-0250
U-21-0500 1/8 1/16 1/32 125 375 250 0.46
U-21-1000 500
Tooling &
Equipment 1000

U-32-0050 3/16 1/8 1/32 125 50
U-32-0250 375 250 0.76
U-32-0500
500

U-42-0050 50
U-42-0250
U-42-0500 1/4 1/5 1/16 125 375 250 1.80
U-42-1000 500

Hose 1000
Accessories
U-64-0050 50
U-64-0100
U-64-0250 3/8 1/4 1/16 125 375 100 3.00
U-64-0500 250

500

U-85-0050 1/2 21/64 .086 125 50
U-85-0100 375 100 4.40
U-85-0250
250

Technical & U-86-0050 1/2 3/8 1/16 85 50
Design U-86-0250 255 100 4.20
U-86-0500
Information 250

U-96-0050 9/16 3/8 3/32 125 375 50 6.80
U-96-0100 100

U-128-0050 3/4 1/2 1/8 125 375 50 12.00
U-128-0100 100
Approvals &
Guides ** Suggested working pressure is 1/3 of burst pressure.
Metric part numbers on the following page.

Alpha- *Colors: Clear-Blank, Black-BLK, Green-GRN, Red-RED, Yellow-YEL, Blue-BLU, Orange-ORG, Gray-GRA
numeric
182 Parker Hannifin Corporation
Index Parflex Division
Ravenna, Ohio

Polyurethane Tubing Hydraulic &
Pneumatic
Hose & Fit.

Metric Polyurethane Tubing PTFE
Hose &
Series U: Polyether Base Fittings

How to order Parflex metric polyurethane tubing Thermoplastic
Example: UM 6x4-0100 Tubing
UM 6 x 4 – 0100

Package Quantity
Tube I. D. in millimeters
Tube O. D. in millimeters
Metric Polyurethane

Part Nom. Nom. Wall Working Min. Coil Weight Thermoplastic Fittings
Number Tube Tube Thick Pressure Burst Length lbs.
I. D. O. D. mm. at 23°C Pressure ft. (m) Per
mm. mm. at 34°C
bar bar 100 ft.

U-21-0050 50 Coiled Air Hose, & Accessories
U-21-0250
U-21-0500 1/8 1/16 1/32 125 375 250 0.46 Fittings
U-21-1000 500

U-32-0050 1000
U-32-0250
U-32-0500 3/16 1/8 1/32 125 50
375 250 0.76
U-42-0050
U-42-0250 500
U-42-0500
U-42-1000 50 Truck (Fleet)
Products
U-64-0050 1/4 1/5 1/16 125 375 250 1.80
U-64-0100 500
U-64-0250
U-64-0500 1000

U-85-0050 50
U-85-0100
U-85-0250 3/8 1/4 1/16 125 375 100 3.00
250
U-86-0050
U-86-0250 500
U-86-0500
1/2 21/64 .086 125 50 Tooling &
U-96-0050 375 100 4.40 Equipment
U-96-0100 1/2 3/8 1/16 85
9/16 3/8 3/32 125 250
U-128-0050 3/4 1/2 1/8 125
U-128-0100 50
255 100 4.20

250

375 50 6.80
100

375 50 12.00 Hose
100 Accessories

Technical &
Design

Information

Approvals &
Guides

183 Parker Hannifin Corporation Alpha-
Parflex Division numeric
Ravenna, Ohio
Index

Hydraulic & Polyurethane Tubing
Pneumatic
Hose & Fit.

PTFE Polyurethane Tubing
Hose &
Fittings Series HU: High Durometer

Thermoplastic • Polyether base. Order by tubing part number and name
Tubing • Tough, strong, kink resistant and abrasion resistant. HU – 2 – BLK – 0500
• Excellent hydrolytic stability.
Coiled Air Hose, ThermoplasticFittings • Broad temperature range. Package Quantity
• Five colors. *Colors: Black
• Has a Shore A hardness greater than 95 durometer. This high Tube O. D. in sixteenths of an in.
Polyurethane — High Durometer
durometer enables the use of compression/push-to-connect
fittings and significantly increases the working pressure versus Fitting Recommendations:
standard polyurethane tubing.
• High quality, precision made tubing used in a wide range of • Parker TrueSeal™ fittings.
demanding and critical applications. • Parker Brass Fittings and MicroLok fittings available from:
• Polyurethane tubing occupies a unique position among
polymers, sharing the best properties of both rubber and Brass Products Division
plastic. Urethane exhibits the elongation and recovery Otsego, Michigan
characteristics of rubber and the chemical resistance Phone (616) 694-9411
associated with plastics.
Fittings& Accessories • Used for a wide variety of applications. Typical usage
includes air tools, robotics, pneumatic logic and actuation
systems, analytical instrumentation, vacuum equipment,
pressure measurement apparatus, semiconductor equipment
manufacturers and a variety of laboratory applications.
• The recommended operating temperature range for service
at rated pressures with compatible fluids is -40°F (-40°C) to
+180°F (+82°C).

Also available in coils

Truck (Fleet) Part Nom. Nom. Wall Working Min. Coil Weight
Products Number Tube Tube Thick Pressure Burst Length lbs.
I. D. O. D. at 73°F Pressure Per
in. in. in. at 73°F ft.
PSI PSI 100 ft.

Tooling & HU-2-0100 1/8 .063 .031 300 900 100 0.48
Equipment HU-2-0500 250 0.64
500 1.55
HU-2.5-0100 5/32 .094 .031 210 630 3.27
HU-2.5-0500 100 6.18
500
Hose HU-4-0100 1/4 .160 .045 180 540
Accessories HU-4-0500 100
500
HU-6-0100 3/8 .250 .062 180 540
HU-6-0500 100
500
HU-8-0100 1/4 .320 .090 180 540
HU-8-0250 100
250
HU-12-0100 3/4 .467 .142 Contact Parflex Division
HU-12-0250 for additional information. 100
Technical & 250
Design
** Suggested working pressure is 1/3 of burst pressure.
Information Metric part numbers on the following page.

Approvals &
Guides

Alpha- * Colors: Black-BLK, Red-RED, Navy Blue-DBL, Silver-SIL, Blue-BLU.
numeric Consult Division concerning the following new color offerings: brown, gray, green, yellow, orange, clear, white, purple, light gray, neon
pink, neon green, neon orange, and the following transparent colors: red, green, blue, yellow, orange, purple.
Index
184 Parker Hannifin Corporation
Parflex Division
Ravenna, Ohio

Polyurethane Tubing Hydraulic &
Pneumatic
Hose & Fit.

Metric Polyurethane Tubing How to order Parflex metric polyurethane tubing PTFE
Hose &
Series HUM: High Durometer (Metric) Example: HUM-6-BLK-0100 Fittings

• Polyether base. HUM – 6 – BLK – 0100
Package Quantity
*Colors: Black Thermoplastic
Tube O. D. in millimeters Tubing
Metric polyurethane
— High Durometer

Part Nom. Nom. Wall ** Min. Coil Weight Thermoplastic Fittings
Number Tube Tube Thick Working Burst Length lbs.
I. D. O. D. mm. Pressure Pressure Per
mm. mm. at 23°C at 23°C ft.
bar 100 ft.
bar (kg)

HUM-4-0100 4 2.4 0.84 12.4 37.2 100 .68 Coiled Air Hose,Fittings& Accessories
HUM-4-0500 37.2 500 (0.31)
37.2
HUM-6-0100 6 4.0 1.00 12.4 37.2 100 1.30
HUM-6-0500 37.2 500 (.558)

HUM-8-0100 8 5.0 1.50 12.4 100 2.59
HUM-8-0250 500 (1.17)

HUM-10-0100 10 6.5 1.80 12.4 100 3.84 Truck (Fleet)
HUM-10-0250 250 (1.74) Products

HUM-12-0100 12 8.0 2.06 12.4 100 4.92
HUM-12-0250 250 (2.23)

**Suggested working pressure is 1/3 of burst pressure.

Note: Tooling &
Equipment
Metric urethane tubing is packaged in the following lengths:
100 ft. (30.5 meters), 250 ft. (76.2 meters), 500 ft. (152.4 meters).

Hose
Accessories

Technical &
Design

Information

Approvals &
Guides

* Colors: Black-BLK, Red-RED, Navy Blue-DBL, Silver-SIL, Blue-BLU. Consult Division for availability of other color options. Alpha-
numeric
185 Parker Hannifin Corporation
Parflex Division Index
Ravenna, Ohio

Hydraulic & Polyurethane Tubing
Pneumatic
Hose & Fit.

PTFE Polyurethane Tubing
Hose &
Fittings Series LU: Low Durometer

Thermoplastic • Polyether base. Order by tubing part number and name
Tubing • Tough, strong, kink resistant and abrasion resistant. LU – 2 – BLK – 0100
• Excellent hydrolytic stability.
• Flexible and easy to assemble onto designated fittings. Package Quantity
• Broad temperature range. *Colors: Black
• Chemically resistant. Tube O. D. in sixteenths of an in.
• High quality, precision made tubing used in a wide range of Polyurethane — Low Durometer

demanding and critical applications.

Coiled Air Hose, Thermoplastic • Occupies a unique position among polymers, sharing the Fitting Recommendations:
best properties of both rubber and plastic. Urethane exhibits
the elongation and recovery characteristics of rubber and the • Par-Barb fittings.
chemical resistance associated with plastics.

Fittings • Used for a wide variety of applications. Typical usage • Parker Brass Fittings including MicroLok fittings available from:
includes air tools, robotics, pneumatic logic and actuation Brass Products Division
systems, analytical instrumentation, vacuum equipment, Otsego, Michigan
pressure measurement apparatus, semiconductor equipment Phone (616) 694-9411
manufacturers and a variety of laboratory applications.

Fittings& Accessories • Maximum working pressure was determined in carefully
controlled tests. Actual results may vary with different media,
working conditions, or fittings.

• The recommended operating temperature range for service
at rated pressures with compatible fluids is -40°F (-40°C) to
+180°F (+82°C).

Also available in coils

Truck (Fleet) Part Nom. Nom. Wall ** Min. Coil Weight
Products Number Tube Tube Thick Working Burst Length lbs.
I. D. O. D. Pressure Pressure Per
in. in. in. at 73°F at 73°F ft.
PSI 100 ft.
PSI

Tooling & LU-2-0100 1/8 1/16 1/32 145 435 100 0.44
Equipment 405 100 0.69
LU-2.5-0100 5/32 5/64 .039 135 435 100 1.78
300 100 2.38
LU-4-0100 1/4 1/8 1/16 145

LU-5-0100 5/16 3/16 1/16 100

**Suggested working pressure is 1/3 of burst pressure.

Hose
Accessories

Technical &
Design

Information

Approvals &
Guides

Alpha- * Colors: Black-BLK.
numeric Consult Division concerning the following new color offerings: brown, gray, green, yellow, orange, clear, white, purple, light gray, neon
pink, neon green, neon orange, and the following transparent colors: red, green, blue, yellow, orange, purple, pink.
Index
186 Parker Hannifin Corporation
Parflex Division
Ravenna, Ohio

Clear Vinyl Tubing Hydraulic &
Pneumatic
Hose & Fit.

Clear Vinyl Tubing PTFE
Hose &
Parflex Clear Vinyl Tubing Formula Number V-1, Instrument and Laboratory Grade Fittings
FDA Compliance

• Made from a virgin clear PVC (polyvinyl Crystal Made from Virgin PVC Resins
chloride) resin, specially formulated for Clear Avg. Weight
exceptional purity, clarity and flexibility. Part Wall Working Standard Per
Number I. D. O. D. Thick Pressure at Coil Length 100 ft.
• Superior or equivalent to clear vinyl in. in. in. 73°F PSI ft. lbs. Thermoplastic
tubing available from any other source. Tubing
PV21-1 1/8 1/16 1/32 35 100 0.48
• Formula V-1 tubing fully meets all PV32-1 .170 1/8 .025 35 100 0.58 Thermoplastic Fittings
specifications called out by the United PV42-1 1/4 1/8 1/16 65 100 2.52
States Food and Drug Administration PV43-1 1/4 .170 .040 55 100 1.35 Coiled Air Hose,Fittings& Accessories
(FDA) for materials in contact with food
and drugs for human consumption. PV403-1 1/4 3/16 1/32 22 100 1.11 Truck (Fleet)
PV53-1 5/16 3/16 1/16 55 100 2.51 Products
• 70 durometer for soft, easy handling PV63-1 3/8 3/16 3/32 65 100 4.26
and bending without tubing collapse. PV73-1 7/16 3/16 1/8 75 100 6.28 Tooling &
Equipment
• Crystal clear for fully visible fluid flow PV54-1 5/16 1/4 1/32 20 100 1.42
and excellent appearance. PV64-1 3/8 1/4 1/16 55 100 3.15
PV74-1 7/16 1/4 3/32 60 100 5.18
• The recommended operating PV84-1 1/2 1/4 1/8 70 100 7.55
temperature range for service
at rated pressures with compatible PV75-1 7/16 5/16 1/16 50 100 3.7
fluids is -40°F (-40°C) to PV85-1 1/2 5/16 3/32 60 100 6.15
+150°F (+65°C). PV95-1 9/16 5/16 1/8 70 100 8.80

Fitting Recommendations: PV86-1 1/2 3/8 1/16 45 100 4.41
PV96-1 9/16 3/8 3/32 50 100 7.06
• Tubing sizes 42, 43, 53, 64, 86 and PV106-1 5/8 3/8 1/8 60 100 10.07
108 are made for use with Parker Fast
& Tite® tube fittings. A tube support PV97-1 9/16 7/16 1/16 40 100 5.03
should be used with this tubing for PV107-1 5/8 7/16 3/32 45 100 8.04
maximum fitting holding power. PV117-1 11/16 7/16 1/8 50 100 11.49

• Par-Barb insert barbed type fittings PV108-1 5/8 1/2 1/16 30 100 5.66
may be used with all sizes of Parflex PV118-1 11/16 1/2 3/32 40 100 8.94
clear vinyl tubing. PV128-1 3/4 1/2 1/8 45 100 12.59
PV138-1 13/16 1/2 5/32 60 100 16.70
• Parker Brass Fittings are available
from: PV129-1 3/4 9/16 3/32 40 100 9.94
Brass Products Division PV139-1 13/16 9/16 1/8 45 100 13.84
Otsego, Michigan
Phone (616) 694-9411

How to order tubing: PV1310-1 13/16 5/8 3/32 35 100 10.82
PV1410-1 7/8 5/8 1/8 40 100 15.11
PV 10 8 – 1 PV1510-1 15/16 5/8 5/32 50 100 19.63

Formula V-1 FDA PV1411-1 7/8 11/16 3/32 30 100 11.83 Hose
Approved Formulation PV1611-1 1 11/16 5/32 45 100 21.27 Accessories
Tube I. D. in sixteenths
of an inch PV1612-1 1 3/4 1/8 35 100 17.62
Tube O. D. in sixteenths PV1712-1 1-1/16 3/4 5/32 35 100 22.77
of an inch PV1812-1 1-1/8 3/4 3/16 50 50 28.32
Parflex Clear Vinyl PV2012-1 1-1/4 3/4 1/4 55 50 40.28
Tubing
PV1814-1 1-1/8 7/8 1/8 30 50 20.14
PV1914-1 1-3/16 7/8 5/32 35 50 25.91 Technical &
PV2014-1 1-1/4 7/8 3/16 45 50 32.10 Design

PV2016-1 1-1/4 1 1/8 25 50 22.66 Information
PV2116-1 1-5/16 1 5/32 30 50 29.03
PV2216-1 1/3/8 1 3/16 40 50 35.87
PV2416-1 1-1/2 1 1/4 45 50 50.35

PV2218-1 1-3/8 1-1/8 1/8 25 50 25.18

PV2410-1 1-1/2 1-1/4 1/8 20 50 27.69
PV2620-1 1-5/8 1-1/4 3/16 35 50 43.43
PV2810-1 1-3/4 1-1/4 1/4 45 50 60.42

PV3024-1 1-7/8 1-1/2 3/16 30 50 50.98 Approvals &
PV3224-1 2 1-1/2 1/4 40 50 70.49 Guides
PV3628-1 1-3/4 1/4 30 50 80.56
2-1/4

PV4032-1 2-1/2 2 1/4 35 50 90.63

187 Parker Hannifin Corporation Alpha-
Parflex Division numeric
Ravenna, Ohio
Index

Hydraulic & Burst Pressure/Temperature Charts
Pneumatic
Hose & Fit. Nylon Flexible Tubing

PTFE Nylon Semi-Rigid Tubing N Series (NN, NB)
Hose & 1/8 through 1/2 O. D. inches
Fittings NR Series (NNR, NBR)
1/8 through 1/2 O. D. inches Minimum
Burst
Minimum Pressure
Burst (PSIg)
Pressure
(PSIg)
(Thousands)

Thermoplastic
Tubing

Coiled Air Hose, ThermoplasticFittings

Fittings& Accessories

Truck (Fleet) Nylon Semi-Rigid Tubing Nylon Flexible Tubing
Products
NR Series (NNR, NBR) N Series (NN, NB)
1/8 through 1/2 O. D. inches 1/8 through 1/2 O. D. inches

Minimum Minimum
Burst Burst
Pressure Pressure
(PSIg) (PSIg)
(Thousands)

Tooling &
Equipment

Hose
Accessories

Technical &
Design

Information

Approvals &
Guides

Alpha- Suggested working pressure is 1/4 of burst pressure at system operating temperature. Parker Hannifin Corporation
numeric Parflex Division
188 Ravenna, Ohio
Index

Burst Pressure/Temperature Charts Hydraulic &
Pneumatic
Polypropylene Tubing Hose & Fit.

Polyethylene Tubing PP Series PTFE
1/8 through 5/8 O. D. inches Hose &
Laboratory Grade E Series Fittings
1/4 through 5/8 O. D. inches Minimum
Burst
Minimum Pressure
Burst (PSIg)
Pressure (Thousands)
(PSIg)

Thermoplastic
Tubing

Thermoplastic Fittings

Similar curves for Poluflo sizes Coiled Air Hose,Fittings& Accessories
Consult Factory
Polyethylene Tubing Truck (Fleet)
Polyethylene Tubing Products
Flame Resistant FRPE Series
High Density HDPE Series 5/32 through 1/2 O. D. inches
1/4 through 5/8 O. D. inches
Minimum
Minimum Burst
Burst Pressure
Pressure (PSIg)
(PSIg)

Tooling &
Equipment

Hose
Accessories

Technical &
Design

Information

Approvals &
Guides

Suggested working pressures of nylon, polypropylene and polyethylene are 1/4 of burst pressure at system operating temperature. Alpha-
Suggested working pressure of polyurethane is 1/3 of burst pressure at system operating temperature. numeric

189 Parker Hannifin Corporation Index
Parflex Division
Ravenna, Ohio

Hydraulic & Burst Pressure/Temperature Charts
Pneumatic
Hose & Fit.

Metric Nylon Tubing Metric Nylon Tubing

PTFE N Series N Series
Hose & 4 millimeters through 12 millimeters O. D. 14 millimeters through 20 millimeters O. D.
Fittings
Minimum Minimum
Burst Burst
Pressure (bar) Pressure (bar)

Thermoplastic Metric Polyurethane Tubing 60 N16 x 1.5 N14 x 1.5
Tubing 55 N20 x 1.5
UM Series Polyether Base 50
Coiled Air Hose, ThermoplasticFittings 4 through 12 O. D. millimeters 45
40
Minimum 35
Burst 30 N18 x 1.5
Pressure 25
(PSIg) 20
15
10

5

0 86
23 35 48 60 73
Temperature (deg. C.)

Fittings& Accessories Polyurethane Tubing

Truck (Fleet) U Series Polyether Base
Products 1/8 through 3/4 O. D. inches

Minimum
Burst
Pressure
(PSIg)

Tooling &
Equipment

Hose
Accessories

Technical &
Design

Information

Approvals &
Guides

Alpha- 190 Parker Hannifin Corporation
numeric Parflex Division
Ravenna, Ohio
Index