The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.

Interspec Vertical Sides [16,700ft²] Remove all weld splatter, smooth weld seams and sharp edges. Fresh water wash to remove all dirt and contamination.

Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by , 2016-01-30 00:33:03

Interspec - University of California, San Diego

Interspec Vertical Sides [16,700ft²] Remove all weld splatter, smooth weld seams and sharp edges. Fresh water wash to remove all dirt and contamination.

Interspec

Where legislation does not explicitly restrict or limit the use of lead containing
coatings it is the responsibility of the client to inform International Paint in writing of
their specific requirements

Technical Specification

Scripps Institute of Oceanography UU800028
Melville
California- San Francisco , U.S.A.
19-Nov-2013

Hark, J.
E-Mail : [email protected]

Marine Coatings UU800028

Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. Please note that a surcharge may be applied to 19-Nov-2013
the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated 1
companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request
Melville

Main Schemes Description Interspec

Area An Interspeed 640 high peformance TBT free polishing scheme for an in-service of 36 months. Area ft²
An Intershield 300V abrasion resistant epoxy anticorrosive and Interthane 990HS polyurethane finish.
Vertical Sides _ 16,700ft²
Freeboard 14,000ft²
Thinners
_

Marine Coatings UU800028

Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. Please note that a surcharge may be applied to 19-Nov-2013
the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated 2
companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request
Melville

Interspec

Vertical Sides [16,700ft²]

An Interspeed 640 high peformance TBT free polishing scheme for an in-service of 36 months.

Surface Preparations
Remove all weld splatter, smooth weld seams and sharp edges. Fresh water wash to remove all dirt and contamination. Degrease according to SSPC-SP1 solvent cleaning. Ensure area is clean and dry prior to
application.Close high pressure fresh water wash (3,000 psi/211 Kg cm²) using a fan jet lance holding the tip 150mm from and perpendicular to the surface overlapping each pass 30% removing all dirt, dust salt, partially
hydrolised antifouling layer and other surface contamination.Part/Spot blast to Sa2 ISO 8501-1 or SSPC SP6.Ensure all surfaces are clean, dry and free of contamination prior to the application of each coat of the specified
paint scheme.

Product Colour Coats DFT Mils WFT Mils PSR Touch Hard Dry Overcoating 77°F Pot Life Thinner Cleaner Volume US Gal
Intershield 300V Bronze 15% TU 5.0 7.9 (ft²/US Dry 77°F 77°F Min Max 77°F
2hrs GTA220 GTA415, 17.4
143.74 3hrs 4hrs __ GTA822
2hrs GTA220 GTA415, 17.4
Intershield 300V Aluminium 15% TU 5.0 7.9 143.74 3hrs 4hrs __ GTA822
_ GTA007 GTA007 23.7
Interspeed 640 Black 20% TU 5.0 8.1 141.46 4hrs _ 6hrs ext _ GTA007 GTA007 141.5
Interspeed 640 Red FC _ 6hrs ext __ _ 200.0
_ _ _ 6.0 9.7 117.88 4hrs _
__
21.0 33.6 __

Scheme Notes: 2nd coat of Intershield 300V (Aluminum) shall be "thumbprint tacky" in order to apply 1st coat of Interspeed 640 (Black).

Freeboard [14,000ft²]

An Intershield 300V abrasion resistant epoxy anticorrosive and Interthane 990HS polyurethane finish.

Surface Preparations
Remove all weld splatter, smooth weld seams and sharp edges. Fresh water wash to remove all dirt and contamination. Degrease according to SSPC-SP1 solvent cleaning. Ensure area is clean and dry prior to
application.Close high pressure fresh water wash (3,000 psi/211 Kg cm²) using a fan jet lance holding the tip 150mm from and perpendicular to the surface overlapping each pass 30% removing all dirt, dust salt, partially
hydrolised antifouling layer and other surface contamination.Part/Spot blast to Sa2 ISO 8501-1 or SSPC SP6.Ensure all surfaces are clean, dry and free of contamination prior to the application of each coat of the specified
paint scheme.

Product Colour Coats DFT Mils WFT Mils PSR Touch Hard Dry Overcoating 77°F Pot Life Thinner Cleaner Volume US Gal
15% TU 5.0 7.9 (ft²/US Dry 77°F 77°F 77°F 14.6
Min Max 2hrs GTA220 GTA415, 14.6
GTA822 54.1
Intershield 300V Bronze 143.74 3hrs 4hrs 6.5hrs 5.5mths 2hrs GTA220 GTA415, 83.3
GTA822
Intershield 300V Aluminium 15% TU 5.0 7.9 143.74 3hrs 4hrs 6.5hrs 3days 3hrs GTA056 GTA056
__ _
Interthane 990HS Base Ultra Deep FC 3.0 4.4 258.57 2hrs 6hrs 6hrs ext
_ _ __
_ 13.0 20.2 __ _

Scheme Notes: Interthane 990HS use 99072143/A5GL Dark Blue

Marine Coatings UU800028

Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. Please note that a surcharge may be applied to 19-Nov-2013
the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated 3
companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request
Melville

Interspec

Thinners Product Colour Sales Code Volume US Gal

International _ GTA220 20.0
International _ GTA007 20.0
_ _ _ 40.0

Marine Coatings UU800028

Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. Please note that a surcharge may be applied to 19-Nov-2013
the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated 4
companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request
Melville

Interspec

Product List Product Colour Sales Code Volume Solids (%) Volume (US Gal )
Product
Intershield 300V Bronze ENA310/A 63 32.0
Intershield 300V Aluminium ENA311/A 63 32.0
Interspeed 640 Red BRA640 62 141.5
Interspeed 640 Black BRA642 62 23.7
Interthane 990HS Base Ultra Deep 99044/A 68 54.1

Product List - Thinners Colour Sales Code Volume Solids (%) Volume (US Gal )

International _ GTA007 0 20.0
International _ GTA220 0 20.0

Marine Coatings UU800028

Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. Please note that a surcharge may be applied to 19-Nov-2013
the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated 5
companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request
Melville

Interspec

Application Notes

Marine Coatings UU800028

Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. Please note that a surcharge may be applied to 19-Nov-2013
the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated 6
companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request
Melville

Interspec

Terms and Conditions

This confidential document is for the use of the above named client and its contents should not be reproduced or transmitted without prior written permission from International Paint. The information is given in good faith
and attention to the following statement :

The information given in this report is not intended to be exhaustive and any person using any products for any purpose other than that specifically recommended in this report without first obtaining written confirmation
from us as to the suitability of the product for the intended purpose does so at his own risk. Any warranty, if given, or specific Terms & Conditions of Sale are contained in International Paints Terms and Conditions of Sale,
a copy of which can be obtained on request. Whilst we endeavour to ensure that all advice we give about the product (whether in this report or otherwise) is correct we have no control over either the quality or condition of
the substrate or the many factors affecting the use and application of this product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever for howsoever arising for the
performance of our products or for any loss or damage (other than death or personal injury resulting from our negligence) arising out of the use of the product. The information contained in this report is liable to modification
from time to time in the light of experience and our policy of continuous product development.

It is the user's responsibility to check that upto date product data sheets are obtained prior to using the products and that local environmental controls that may be in force are observed when using any of our products.

Health & Safety
Products referred to in this report are intended for use only by professional applicators in industrial situations in accordance with the advice given on our Technical Datasheetst, the Material Safety Data Sheet and the
container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS).

All work involving the application and use of this product should be performed in compliance with all relevant national Health, Safety & Environment standards and regulations.

In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust
ventilation.

If in doubt regarding the suitability of use of this product, consult International Paint for further advice.

Marine Coatings UU800028

Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale. Please note that a surcharge may be applied to 19-Nov-2013
the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated 7
companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request
Melville


Click to View FlipBook Version