ONAT ALCI CATALOG

ONPO Mining Industry and Trading Company started
to operate in gypsum sector under the ONAT GYPS
brand which is produced in its factory established in
2011 in Ankara. ONPO Mining with the aim of continious
growth, expanded its product range with ONATPAN
Gypsum Board factory which was established in 2015
at the same location.
Onpo Mining being one of the biggest gypsum
production companies has an annual production
capacity of 450.000 tons of gypsum plaster and
15,000.000 m² of gypsum board at its factories
established in the area of 100.000 m².
Owing to precision in production and quality control
processes with customer-oriented sales policy, ONPO
Mining is among the leading companies in the Turkish
plaster industry. Our company will continue to make
investments to develop the sector & Turkish economy
and offer the best services to our customers in
accordance with these principles.

MISSION OF THE COMPANY
To provide healthy ambiences in the construction
material sector at the most economic conditions
through ensuring safety, quality and continuous
improvement together with our employees and
shareholders in compliance with the national and
international standards as Onpo Madencilik Insaat
Sanayi ve Ticaret A.S.
VISION OF THE COMPANY
To meet the constantly improving technology and the
expectations of the customers; to contribute usage of
plaster and plaster based materials in construction
material sector through its high quality service
concept and to create a brand demanded nationally
and internationally.
QUALITY POLICY
To provide high efficiency and customer oriented
service through constant improvement of our Quality
Management System and Institutional structure to
respond the improving needs of the technology and
the expectations of our customers through aiming
100% customer satisfaction in plaster and plaster
based construction materials.

PERONAT
Gypsum Hand Plaster

This is the bagged plaster based ready plaster, which may be applied directly
on the materials such as brick, concrete, exposed concrete, aerated concrete,
pumice concrete, etc. This removes the discrimination between scratch coat
and finishing coat.

Technical Specifications and the TSE Standard
(Turkish Standard Institute)

Physical Form White powder

Plaster/Water Rate 10 kg to 6-6,5 Liters of water

Usage Period 60-90 minutes

Freezing Period 150 minutes

Dry unit weight 650-750 Kg/m³

Consumption amount 8,5-9,0 Kg/m³ (at each 1 cm)

Compression strength 2,5 N/mm² (7 days later)

Flexural Strength 1,5 N/mm² (7 days later)

Reaction to fire A1 (according to TS EN 13279 - 1)

Standard 13279-1,2 ( TYPE B4 )

The Surface and the Setting to be Applied
- It should be free of dirty material such as dust, oil and paint.
- The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water.
- The surface of the ceilings should be roughened before applying the plaster or undercoated with a material to ensure attachment of the mortar.
- It should be paid attention that there is no air current and air circulation at the atmosphere during application.
- The application temperature should be between +5 and +35 ˚C.

Application
6-6,5 liters of water is poured down into the mixture bowl; 10 kilograms of Peronat Plaster is added sprinkling into the water. It is awaited for a period of
approximately 2-3 minutes in order to cause the plaster to absorb the water. It is mixed with a hand mixer or with the help of a trowel in order to obtain a
homogenous mixture. The application thickness is determined with the help of an annular according to the smoothness of the surface. The prepared mortar
is applied on the surface with the help of a steel trowel. The mortar is flatted trough surface finishing. The surface is flatted after surface finishing with the help
of a steel trowel. If an application of two layers is to be applied, 2nd layer of application should not be started before the 1st layer settles.

Packaging
Polypropylene bags of 35 kg ( ± 2 %)

Storage
At most 15 bags should be stockpiled one on another at a dry place; the bags must not be in contact with the floor and they must be stored protected from
humidity and condensation. They must be used within 9 months after production date.

MAKONAT
Gypsum Sray Plaster

This is the bagged plaster based ready machine applied plaster, which may be
applied directly on the materials such as brick, concrete, exposed concrete,
aerated concrete, pumice concrete, etc.

Technical Specifications and the TSE Standard
(Turkish Standard Institute)

Physical Form White powder

Plaster/Water Rate 10 kg to 5.5-6 liters of water

Usage Period 130-180 minutes

Freezing Period 250-300 minutes

Consumption amount 9.0-9,5 Kg/m³(at each 1 cm thickness)

Compression strength 2,5 N/mm² (4x4x16 blocks)

Flexural Strength 1,0 N/mm² (4x4x16 blocks)

Dry unit weight 730-800 Kg/m³

Reaction to fire A1 (According to TS EN 13279 - 1)

Standard 13279-1,2 ( Type B4, applied with spraying)

The Surface and the Setting to be Applied
- It should be free of dirty material such as dust, oil and paint.
- The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water.
- The surface of the ceilings should be roughened before applying the plaster or undercoated with a material to ensure attachment of the mortar.
- It should be paid attention that there is no air current and air circulation at the atmosphere during application.
- The application temperature should be between +5 and +40 ˚C.

Application
Appropriate amount of plaster is prepared (5,5-6 liters of water / 10 kg makonat)in the plastering machine. The application thickness is determined with the
help of an annular according to the smoothness of the surface. The mortar is flatted through surface finishing. When the surface starts hardening, it is flatted
with the help of a steel trowel. When a light pressure is applied on the surface, if it does not subside, trifilling process can be started. After trifilling process,
polishing is made again with a steel trowel and the surface is made ready for painting.

Packaging
Polypropylene bags of 35 kg ( ± 2 %)

Storage
At most 15 bags should be stockpiled one on another at a dry place; the bags must not be in contact with the floor and they must be stored protected from
humidity and condensation. They must be used within 9 months after production date.

SATONAT
Finish Gypsum Plaster

This has a high adhesion characteristics and it is the last layer of polishing
plaster under the paint. It may be applied both on the mortar and the plaster
surfaces plastered with satin as well as on the gypsum plasterboards.

Technical Specifications and the TSE Standard
(Turkish Standard Institute)

Physical Form White powder

Plaster/Water Rate 10 kg to 7 liters of water

Usage Period 120-160 minutes

Freezing Period 300-350 minutes

Consumption Amount 0.2 - 0.4 Kg/m³ (at each 1 cm thickness)

Compression strength 3,0 N/mm² (4x4x16 blocks)

Dry unit weight 680-720 Kg/m³

Flexural Strength 1,5 N/mm² (7 days later)

Reaction to fire A1 (According to TS EN 13279-1)

Standard TSE EN 13279-1,2 ( Type C6, thin applicable plaster)

The Surface and the Setting to be Applied
- It should be free of dirty material such as dust, oil and paint.
- The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water.
- The surface of the ceilings should be roughened before applying the plaster or undercoated with a material to ensure attachment of the mortar.
- It should be paid attention that there is no air current and air circulation at the atmosphere during application.
- The application temperature should be between +5 and +40 ˚C.

Application
6,5 - 7 liters of water is poured down into the mixture bowl; Satonat Plaster is added sprinkling into the water. It is awaited for a period of approximately 2-3
minutes in order to cause the plaster to absorb the water. It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture.
The prepared mortar is applied on the surface with the help of a steel trowel.

Packaging
Polypropylene bags of 30 kg ( ± 2 %)

Storage
At most 20 bags should be stockpiled one on another at a dry place; the bags must not be in contact with the floor and they must be stored protected from
humidity and condensation. They must be used within 9 months after production date.

KARONAT
Cornice Plaster

Plaster board is the building plaster used in the construction off decorative
material such as core, niche and sculptures. KARONAT may be used both for
plaster board casting and in affixing the plaster board.

Technical Specifications and the TSE Standard
(Turkish Standard Institute)

Physical Form White powder

Plaster/Water Rate 100 gr. plaster / 70 gr. waterUsage

Period 7-12 minutes

Freezing Period 20-30 minutes

Compression strength 8 N/mm² (7 days later)

Flexural Strength 1,0 N/mm² (7 days later)

Specific Bulk Density 650-700 gr/lt

Grain size Over 50 μ % 16-18 *160 μ over % 0-1,0 PH: 7-8

Surface hardness 60 shore D
Standard
TSE EN 13279-1,2 ( Tip C1, reinforced with fiber, construction
plaster for plaster elements)

The Surface and the Setting to be Applied
- It should be free of dirty material such as dust, oil and paint.
- The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water.
- The surface of the ceilings should be roughened before applying the plaster or undercoated with a material to ensure attachment of the mortar.
- It should be paid attention that there is no air current and air circulation at the atmosphere during application.
- The application temperature should be between +5 and +40 ˚C.

Application
6,5-7 liters of water is poured down into the mixture bowl; Karanot Moulding Plaster is added sprinkling into the water. It is awaited for a period of approximately
2-3 minutes in order to cause the plaster to absorb the water. It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture.
The prepared mortar is poured into the formwork prepared and lubed before. After pouring a layer, a layer of fiber or hemp is laid on that layer of plaster in
order to make the mould more flexible and strong. Another layer of plaster is poured down of the laid fiber or hemp. The plaster poured down into the mold
will start to warm after a while. The plaster first warmed and then cooled will let itself go after a while. The plaster taken out of the mould is left at the room
temperature to dry before mounting.

Packaging
Polypropylene bags of 30 kg ( ± 2 %)

Storage
At most 20 bags should be stockpiled one on another at a dry place; the bags must not be in contact with the floor and they must be stored protected from
humidity and condensation. They must be used within 9 months after production date.

YAPONAT
Adhesive Plaster Boord

It is used for internal thermal isolation applications with adhesion of EPS, XPS,
composite plate or rock wool to gypsum plates and during adhesion of gypsum
plates to internal space surfaces, such as concrete, bricks, bims block and
gross concrete.

Technical Specifications and the TSE Standard
(Turkish Standard Institute)

Physical Form White powder

Plaster/Water Rate 10 kg to 5.5 liters of water

Usage Period 60-90 minutes

Freezing Period 140-180 minutes

Consumption amount 5 Kg/m² (at each 1 cm thickness)

Compression strength 6,0 N/mm² (4x4x16 blocks)

Flexural Strength 1,0 N/mm² (4x4x16 blocks)

Dry unit weight 680-720 Kg/m³

Reaction to fire A1 (TS EN 13279-1)

Standard TSE EN 14496

The Surface and the Setting to be Applied
- It should be free of dirty material such as dust, oil and paint.
- The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water.
- The surface of the ceilings should be roughened before applying the plaster or undercoated with a material to ensure attachment of the mortar.
- It should be paid attention that there is no air current and air circulation at the atmosphere during application.
- The application temperature should be between +5 and +40 ˚C.

Application
5 - 5,5 liters of water is poured down into the mixture bowl; 10 kilograms of Yaponat Plaster is added sprinkling into the water. It is awaited for a period of
approximately 2-3 minutes in order to cause the plaster to absorb the water. It is mixed with a hand mixer or with the help of a trowel in order to obtain a
homogenous mixture.
The prepared mortar should be applied to the surface enough intervals in short bursts driven. The bonding process, after the pasted the smoothness of the
surface should be checked.

Packaging
Polypropylene bags of 30 kg ( ± 2 %)

Storage
At most 20 bags should be stockpiled one on another at a dry place; the bags must not be in contact with the floor and they must be stored protected from
humidity and condensation. They must be used within 9 months after production date.

DERZONAT
Joint Filler Plaster

It is employed on internal spaces for plasterboard, curtain, light band, molding
and decorative aimed applications.

Technical Specifications and the TSE Standard
(Turkish Standard Institute)

Physical Form White powder

Plaster/Water Rate 10 kg to 5.5-6 liters of water

Usage Period 80-100 minutes

Freezing Period 160-200 minutes

Consumption amount 0.2 - 0.4 Kg/m³ (at each 1 cm thickness)

Compression strength 4,0 N/mm² (4x4x16 blocks)

Flexural Strength 1,0 N/mm² (4x4x16 blocks)

Dry unit weight 680-720 Kg/m³

Reaction to fire A1 (According to TS EN 13279 - 1)

Standard TSE EN 13963

The Surface and the Setting to be Applied
- It should be free of dirty material such as dust, oil and paint.
- The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water.
- The surface of the ceilings should be roughened before applying the plaster or undercoated with a material to ensure attachment of the mortar.
- It should be paid attention that there is no air current and air circulation at the atmosphere during application.
- The application temperature should be between +5 and +40 ˚C.

Application
5,5-6 liters of clean water is poured down into the mixture bowl; 10 kg of DERZONAT is added sprinkling into the water. It is awaited for a period of approximately
2-3 minutes in order to cause the plaster to absorb the water. It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture.
The application thickness is determined with the help of an annular according to the smoothness of the surface. The prepared mortar is applied on the surface
with the help of a steel trowel. If self-adhesive seam band is to be used, the first layer of application is made after affixing the band. If the self adhesive band
is not to be used, the first layer of DERZONAT is applied in such a way to fill the joints of the seam and seam band is affixed, and then the second layer of
application is made. After DERZONAT is dried, correction is made if necessary.

Packaging
Polypropylene bags of 30 kg ( ± 2 %)

Storage
At most 20 bags should be stockpiled one on another at a dry place; the bags must not be in contact with the floor and they must be stored protected from
humidity and condensation. They must be used within 9 months after production date.

WIDTH (mm) LENGHT (mm) PACKAGE
1200 2500 60 pcs/pallet
1200 2000 60 pcs/pallet
ONATPAN 6 mm 1200 2200 60 pcs/pallet
1200 2400 60 pcs/pallet


ONATPAN WHITE WIDTH (mm) LENGHT (mm) PACKAGE
1200 2500 60 pcs/pallet
THICKNESS ONATPAN 8 mm 1200 2000 60 pcs/pallet
AVERAGE WEIGHT 1200 2200 60 pcs/pallet
FLEXURAL STRENGHT - VERTICAL 1200 2400 60 pcs/pallet
FLEXURAL STRENGHT - HORIZONTAL
EDGE TYPE WIDTH (mm) LENGHT (mm) PACKAGE
THERMAL CONDUCTIVITY (Λ) 1200 2500 60 pcs/pallet
STEAM PASSAGE RESISTANCE FACTOR ONATPAN 9,5 mm 1200 2000 60 pcs/pallet
FIRE CLASS 1200 2200 60 pcs/pallet
REFERANCE STANDARD 1200 2400 60 pcs/pallet
1200 3000 61 pcs/pallet

WIDTH (mm) LENGHT (mm) PACKAGE
2500 50 pcs/pallet
1200 2000 50 pcs/pallet
2200 50 pcs/pallet
ONATPAN 1 2,5 mm 1200 2400 50 pcs/pallet
1200 3000 50 pcs/pallet

1200

1200

WIDTH (mm) LENGHT (mm) PACKAGE
1200 2500 40 pcs/pallet
ONATPAN 15 mm 1200 2000 40 pcs/pallet
1200 2200 40 pcs/pallet
1200 2400 40 pcs/pallet
1200 3000 40 pcs/pallet

WIDTH (mm) LENGHT (mm) PACKAGE

1200 2500 30 Quantity/Package

ONATPAN 18 mm 1200 2000 30 Quantity/Package
1200 2200 30 Quantity/Package

1200 2400 30 Quantity/Package

1200 3000 30 Quantity/Package

6 mm 8 mm 9,5 mm 12,5 mm 15 mm 18 mm
≤5,75 kg/m²
≤6,75 kg/m² ≤7,50 kg/m² ≤9,00 kg/m² ≤11,50 kg/m² ≤14,00 kg/m²
≥260N
≥100N ≥350N ≥400N ≥550N ≥650N ≥780N

≥135N ≥160N ≥210N ≥250N ≥300N

TAPERED EDGE – SQUARED EDGE

0,24 W/Mk

10

A2 -s1 (TSE EN 520 ANNEX B)

TS EN 520 A1

ONATPAN WHITE is Double-side coated, flexible, light and easy applicable, advanced technology natural gypsum Plasterboard product.

ONATPAN WHITE is suitable for covering interior walls and manufacturing of ceiling. Due to its elasticity ONATPAT White can receive any
shape.

ONATPAN WHITE allows easy and rapid application. Provides aesthetic and natural look for construction decoration. Creates comfortable
environment. ONATPAN White can be applied with a screw on metal or wooden frame. YAPONAT adhesive plaster can use for interior wall
covering and DERZONAT jointing plaster to compound and obtain a smooth surface.

WIDTH (mm) LENGHT (mm) PACKAGE
1200 2500 60 pcs/pallet
ONATPAN 9,5 mm 1200 2000 60 pcs/pallet
1200 2200 60 pcs/pallet
1200 2400 60 pcs/pallet
1200 3000 60 pcs/pallet

ONATPAN RED WIDTH (mm) LENGHT (mm) PACKAGE
2500 50 pcs/pallet
THICKNESS 1200 2000 50 pcs/pallet
AVERAGE WEIGHT 2200 50 pcs/pallet
FLEXURAL STRENGHT - VERTICAL ONATPAN 1 2,5 mm 1200 2400 50 pcs/pallet
FLEXURAL STRENGHT - HORIZONTAL 1200 3000 50 pcs/pallet
EDGE TYPE
THERMAL CONDUCTIVITY (Λ) 1200
CORE RESISTANCE
STEAM PASSAGE RESISTANCE FACTOR 1200
FIRE CLASS
REFERANCE STANDARD WIDTH (mm) LENGHT (mm) PACKAGE
1200 2500 40 pcs/pallet
ONATPAN 15 mm 1200 2000 40 pcs/pallet
1200 2200 40 pcs/pallet
1200 2400 40 pcs/pallet
1200 3000 40 pcs/pallet

WIDTH (mm) LENGHT (mm) PACKAGE
1200 2500 30 pcs/pallet
ONATPAN 18 mm 1200 2000 30 pcs/pallet
1200 2200 30 pcs/pallet
1200 2400 30 pcs/pallet
1200 3000 30 pcs/pallet

9,5 mm 12,5 mm 15 mm 18 mm

≤8,50 kg/m² ≤10,00 kg/m² ≤12,50 kg/m² ≤15,00 kg/m²

≥400N ≥600N ≥650N ≥775N

≥160N ≥220N ≥250N ≥302N

TAPERED EDGE – SQUARED EDGE

0,24 W/Mk

≤15 dk.

10

A2 -s1 (TSE EN 520 ANNEX B)

TS EN 520 A1

ONATPAN RED is Double-side coated, Fire Resistant, advanced technology natural gypsum Plasterboard product.

ONATPAN RED is suitable for covering interior walls and manufacturing of ceiling. Provides Fire Resistant surfaces for interior walls.

ONATPAN RED allows easy and rapid application. Provides aesthetic and natural look for construction decoration. Creates comfortable
environment. ONATPAN White can be applied with a screw on metal or wooden frame. YAPONAT adhesive plaster can use for interior wall
covering and DERZONAT jointing plaster to compound and obtain a smooth surface.

WIDTH (mm) LENGHT (mm) PACKAGE
1200 2500 60 pcs/pallet
ONATPAN 9,5 mm 1200 2000 60 pcs/pallet
1200 2200 60 pcs/pallet
1200 2400 60 pcs/pallet
1200 3000 60 pcs/pallet

ONATPAN GREEN WIDTH (mm) LENGHT (mm) PACKAGE
2500 50 pcs/pallet
THICKNESS 1200 2000 50 pcs/pallet
AVERAGE WEIGHT 2200 50 pcs/pallet
FLEXURAL STRENGHT - VERTICAL ONATPAN 1 2,5 mm 1200 2400 50 pcs/pallet
FLEXURAL STRENGHT - HORIZONTAL 1200 3000 50 pcs/pallet
EDGE TYPE
THERMAL CONDUCTIVITY (Λ) 1200
WATER ABSORPTION
STEAM PASSAGE RESISTANCE FACTOR 1200
FIRE CLASS
REFERANCE STANDARD WIDTH (mm) LENGHT (mm) PACKAGE
1200 2500 40 pcs/pallet
ONATPAN 15 mm 1200 2000 40 pcs/pallet
1200 2200 40 pcs/pallet
1200 2400 40 pcs/pallet
1200 3000 40 pcs/pallet

WIDTH (mm) LENGHT (mm) PACKAGE
1200 2500 30 pcs/pallet
ONATPAN 18 mm 1200 2000 30 pcs/pallet
1200 2200 30 pcs/pallet
1200 2400 30 pcs/pallet
1200 3000 30 pcs/pallet

9,5 mm 12,5 mm 15 mm 18 mm

≤8,00 kg/m² ≤9,50 kg/m² ≤12,00 kg/m² ≤14,50 kg/m²

≥400N ≥600N ≥650N ≥775N

≥160N ≥220N ≥250N ≥302N

TAPERED EDGE – SQUARED EDGE

0,24 W/Mk

≤10

10

A2 -s1 (TSE EN 520 ANNEX B)

TS EN 520 A1

ONATPAN GREEN is Double-side coated, Water Resistant, advanced technology natural gypsum Plasterboard product that improved with
water repellent additives.

ONATPAN GREEN provides Water Resistance surfaces. Suitable to use in Bathroom, Kitchen and any areas with high humidity.

ONATPAN GREEN allows easy and rapid application. Provides aesthetic and natural look for construction decoration. Creates comfortable
environment. ONATPAN White can be applied with a screw on metal or wooden frame. YAPONAT adhesive plaster can use for interior wall
covering and DERZONAT jointing plaster to compound and obtain a smooth surface.

ONATPAN WHITE ONATPAN RED ONATPAN GREEN

www.onpo.com.tr

www.onpo.com.tr