Perfect Aire 2PAU20 Humidifier User Manual

Please check the following troubleshooting tips before calling for assistance.

PROBLEM REASON SOLUTION

Unit not plugged in Plug in unit and turn on the ON/OFF switch
by gently pressing it.

7V^LY SPNO[ PZ VɈ Unit is out of water Fill the tank with water. (See page 5.)

Wall outlet has Check the circuit and fuse; try another
no power wall outlet.

Excessive noise Vibration between Place the unit on a stable, level, waterproof
the unit and surface surface.

+HTW [HISL VY ÅVVY Unit is too far from Move unit closer to edge of table so mist
end of table or too has more time to dispense. The unit should
JSVZL [V ÅVVY IL H[ SLHZ[ PUJOLZ VɈ VM [OL ÅVVY

No water/low water Add water to the water tank.
in water tank

The ON light is not Press the ON/OFF switch to turn the unit
working VɈ 7YLZZ [OL 65 6-- Z^P[JO HNHPU [V [\YU
the unit on with the night light.

;OL O\TPKPÄLY PZ 7\[ [OL O\TPKPÄLY VU H ÅH[ SL]LS Z\YMHJL
UV[ VU H ÅH[ SL]LS
Little/no mist surface

Red LED is on. The Add water to the water tank.
water level is too low.

The water is dirty or Thoroughly clean unit and place fresh
stale. water in the tank per the instructions in
this manual.

The nebulizer/ Clean the water reservoir as per the
transducer or fan instructions. Leave water/vinegar solution
does not work. in base for at least 5 minutes.

Condensation on The room is too small ;\YU [OL \UP[ VɈ
windows or unit or too humid.

Scaling on Water is too hard <ZL KPZ[PSSLK VY ÄS[LYLK ^H[LY *SLHU [OL
nebulizer/transducer water reservoir per the instructions.

Mist circling in base Too much water in Empty the base and replace the tank. Do
but not coming out base not add water to the reservoir.
of the nozzle

After reviewing the above troubleshooting tips, should you have any questions or
concerns, please call Consumer Services at 844-4PA-AIRE (844-472-2473).