2015 PRODUCT SPEC GUIDE - Alcoa

2015 PRODUCT SPEC GUIDE

THE LIGHTWEIGHT INNOVATION

HEAVY-DUTY WITHOUT THE HEAVY.

Alcoa Ultra ONE™ Wheel Technology

At just 40 pounds, the 22.5" x 8.25" Alcoa
Ultra ONE™ Wheel with MagnaForce™ alloy
is the lightest in the industry.
• Engineered with MagnaForce™ alloy,

17% stronger for a lighter wheel.
• 5 pounds lighter than anything else

on the market.
• Saves nearly another 100 pounds

on an 18-wheeler compared to other
aluminum wheels.

Ultra ONE™ Wheel
ULTRAx

ALCOA WHEELS OFFER A

SPECTRUM OF BENEFITS:



Lighter weight for improved productivity

Lower maintenance costs

Reduced fuel consumption and emissions

for lower operating costs

Enhanced image and increased vehicle

resale value

Lower CO2 emissions to achieve

sustainability goals

LEADER INNOVATION
IS IN OUR DNA

Alcoa LvL ONE® Wheel Technology

Alcoa LvL ONE® Wheels utilize proven 6061 alloy,
resulting in lower weight, enhanced strength
and eye-catching brightness.

22.5" x 8.25" Wheels
At just 45 pounds, it’s as light as anything on the market. For even lighter weight,
spec Ultra ONE™ Wheels.

Wheel Part Max Approx.
Description Number Load (lbs) Weight (lbs)
22.5 x 8.25 88367x
7,400 45 lbs

88367x 22.5" x 9" Wheels
89365x The lightest wheels in their class.
84360x
Wheel Part Max Approx. Weight Savings
Description Number Load (lbs) Weight (lbs) Aluminum vs. Steel
89365x
22.5 x 9 89465x 10,000 51 lbs 52 lbs
59 lbs 49 lbs

22.5" x 14" Wide Base Wheels
The lightest wheels in their class.

Wheel Part Max Approx. 18-wheeler
Description Number Load (lbs) Weight (lbs) Max Weight Savings
84360x
22.5 x 14 84362x 12,800 54 lbs 1,400 lbs

24.5" x 8.25" Wheels
The lightest wheel in its class.

Wheel Part Max Approx.
Description Number Load (lbs) Weight (lbs)
24.5 x 8.25 98363x
7,400 54 lbs

98363x

SURFACE OPTION CODES

Alcoa aluminum disc wheel mounting dimensions are consistent with SAE J694 or ISO 4107 as applicable.
The finish for Alcoa wheels is specified by replacing the 6th digit “x” shown in the part number with the
appropriate finish option. Finishes are defined as:

0 - Brushed finish on both sides as applicable* 7 - Clean Buff finish on both sides as applicable*

1 - Polished outside only 8 - Clean Buff finish on both sides
(reference data table for offset position)
2 - P olished inside only
(same side as roll stamp) 9 - B rushed finish on both sides
(reference data table for offset position)
3 - Polished both sides

*0 and 7 finish options are determined by inset or outset mounting positions and may not be
finished on both sides. Reference data table for offset position and available finish options.

A FORCE D ura-Bright® Wheels are identified by adding “DB” at the end
E V O LV E D of the regular part number.

No polish Dura-Flange® Wear Protection Wheels are identified by adding
required. “DF” at the end of the regular part number.

Dura-Bright® The Dura-Bright® and Dura-Flange® Wear Protection options
together are identified by the “DD” suffix.

The only finishes available for each part number are defined in
the Finish Options column.

Additional Information:

• D ura-Bright® Wheels shine without polishing. Just wash with soap and water, do not polish or clean
with abrasives.

• D o not exceed maximum wheel load. Customer must compare OEM vehicle load rating to maximum
wheel load rating.

• Do not overinflate. Refer to tire manufacturer’s recommendation for proper tire pressure.

• Before mounting the tire, perform a wheel fitment check to ensure proper clearance from obstructions.

• S ome wheels may bear part numbers not shown in this Spec Guide. Before servicing these wheels,
contact your Alcoa wheel representative for proper load, inflation and part compatibility.

• Outset (positive) / inset (negative) – The distance from the rim centerline to the mounting face of the
wheel. Inset (negative) places the rim centerline inboard of the mounting face and outset (positive) places
the rim centerline outboard of the wheel mounting face. (Outset is also half dual space for dual wheels.)

• Check with vehicle manufacturer or axle manufacturer before retrofitting to outset wide base wheels to
ensure compatibility with axle and wheel end components. P/N 84362x is not recommended for use on
N-Spindle trailer axles.

• P/Ns 88565x and 98565x are Alcoa Severe Service® Wheels.

• T o obtain information about free training on proper installation and maintenance procedures, contact
Alcoa Wheel Products at (800) 242-9898 or on the web at www.alcoawheels.com.

• For details on accessories, see Alcoa Accessory Products Catalog.

HEAVY DUTY DATA

SURFACE OPTION CODES MOUNTING SYSTEM

Size P/N Replaces P/N Approx. Finish Dura-Bright® Dura-Flange® Dura-Bright® Bolt Bolt Bolt Hole H
Wgt (lbs) Options Dura-Flange® Holes Circle Diameter B
22.5x8.25 88311x Options Options
22.5x9 89300x Options
98312x
HEAVY DUTY 24.5x8.25 87340x 88310x, 88300x 52 7 3DB 10 11.25 1.18 8.
22.5x7.5 87360x 98310x 61 7 10 11.25 1.18 8.
Ball Seat 22.5x7.5 88344x 59 7 10 11.25 1.18 8.
22.5x8.25 88342x, 88341x
53 7 8 275mm 26mm 221
7 10 285.75mm 26mm 220
53
7 8 275mm 26mm 221
49

22.5x8.25 ULTRAx 40 1, 2, 7 0DB, 7DF 10 285.75mm 26mm 220
1DB, 2DB 1DF, 10 285.75mm
22.5x8.25 2DF, 7DF 10 285.75mm 26mm 220
22.5x8.25 88367x 88364x, 88362x 45 1, 2, 3, 7 0DB, 1DB, 7DF 1DD, 10 285.75mm 26mm 220
88565x 88567x, 88560x 2DB, 3DB 2DD, 3DD 26mm 220
22.5x9 7DF 10 285.75mm
Hub Pilot 89365x° 89363x 50 1, 2, 7 3DD

1, 7 0DB,1DB
51

2DB

22.5x9 89465x 89464x, 59 1, 2, 3, 7 0DB, 1DB, 26mm 220
89364x, 89360x 2DB, 3DB

24.5x8.25 98247x 98340x 57 7 8 275mm 26mm 221
98367x, 98364x,
WIDE BASE Bus 24.5x8.25 98363x 54 1, 2, 7 0DB, 1DB, 2DB 7DF 0DD, 3DD 10 285.75mm 26mm 220
Applications 98362x 7DF 0DD, 3DD
24.5x8.25 98565x 98567x, 98560x 62 1, 2, 7 0DB, 3DB 0DF, 3DF 10 285.75mm 26mm 220
Ball Seat 22.5x8.25 88361x 53 0, 3 0DB, 3DB 0DF 3DD 10 11.25 1.18 8.
22.5x8.25 88651x 88555x, 88455x 50 0, 3 0DB, 3DB 0DF 10 335mm 32mm
Hub Pilot 22.5x8.25 88652x 88557x, 88456x 50 0, 3 2DD 10 335mm 26mm 281
89651x 89555x, 89455x 51 0, 3 3DB 7DF 2DD 10 335mm 32mm 281
22.5x9 89652x 89553x, 89453x 51 0, 3 0DB, 3DB 7DF 10 335mm 26mm 281
22.5x9 80350x 62 10 335mm 32mm 281
22.5x10.5 80360x 82306xA 68 1 1DB 10 285.75mm 26mm 281
22.5x10.5 98350x 82360x 63 0, 3 1DB 10 335mm 26mm 220
24.5x8.25 98361x 82365x 62 10 11.25 1.18 281
24.5x8.25 82364x, 82366xA 7 3DB
82305x 83357xA 64 8 10 11.25 1.18 8.
22.5x12.25 7 2DB
82306x 83364x, 83366xA 69 2, 7 2DB 10 11.25 1.18 8.
22.5x12.25 82262x° 84060x, 84267x, 60 2, 7 1DB 10 285.75mm 26mm
22.5x12.25 1, 8 1DB 8.
82362x 84161x 62 1, 7 10 285.75mm 26mm 220
22.5x12.25 84062x, 84167x, 0, 1 1DB
82462x° 66 0, 2 0DB, 2DB 10 285.75mm 26mm 220
22.5x12.25 83358x° 84160x 76 1, 9 0DB, 2DB 10 335mm 26mm
22.5x13 1, 7 220
83365x 70 1, 8 10 285.75mm 26mm 281
22.5x13 2, 7
83462x° 71 10 285.75mm 26mm 220
22.5x13 2, 7
84360x 54 10 285.75mm 26mm 220
22.5x14
84362x° 54 10 285.75mm 26mm 220
22.5x14
220

º 0 and 7 finish options are determined by inset or outset mounting positions and may not be finished on both sides. See chart for position and available finish options.
1 Hub cover system kits with part numbers 076185 (front), 077185 (rear), 082122 (front), and 082133 (rear) contain screw-on Hug-A-Lug® nut covers and require a minimum of four (4) threads of the stud to extend above the tightened cap
2 082012 (30mm kit Front and Rear).

OFFSET LOAD RATING Front Hub Cover Rear Hub Cover Nut Cover Only

Hub Outset Inset Max Load Max lnfl Valve (Includes Nut Covers (Includes Nut Covers (Not Intended to
Bore (lbs) (psi) Stem Where Applicable) Where Applicable) Secure Hub Covers)

.722 6.66 5.68 7200 130 TR555D 076155 077155 001501 HEAVY DUTY
.722 6.94 5.93 9000 130 TR554D 076155 077155 001501
.722 6.60 5.59 7200 130 TR555D 076155 077155 001501
0821221 2 (33mm kit) 0821331 2 (33mm kit) 001811
1.1mm 6.28 5.44 7300 120 TR555D 140233A (Stainless 33mm) 109176A (Stainless 33mm) 001811
0.1mm 6.28 5.44 7300 120 TR555D 076188, 0761851, 086100S 077188, 0771851, 087100S 001811
0821221 2 (33mm kit) 0821331 2 (33mm kit)
1.1mm 6.66 5.79 7400 130 TR554D 140233A (Stainless 33mm) 109176A (Stainless 33mm) 001811

0.1mm 6.60 5.85 7400 130 TR554D 076188, 0761851, 086100S 077188, 0771851, 087100S 001811
0.1mm 7400 130 001811
0.1mm 6.60 5.79 8050 130 TR554D 076188, 0761851, 086100S 077188, 0771851, 087100S
0.1mm 6.60 5.71 10000 130 TR554D 001811
N/A 3.12 076188, 0761851, 086100S 077188, 0771851, 087100S
0.1mm 4.06 N/A 10000 130 TR555E 001811
076188, 0761851, 086100S N/A
6.94 5.96 TR554D 001811
076188, 0761851, 086100S 077188, 0771851, 087100S
1.1mm 6.60 5.73 7300 130 TR555D 001811 WIDE BASE
0821221 2 (33mm kit) 0821331 2 (33mm kit) 001811
0.1mm 6.60 5.73 7400 130 TR555D 140233A (Stainless 33mm) 109176A (Stainless 33mm) 001821
TR555D
0.1mm 6.60 5.61 8300 130 TR555D 076188, 0761851, 086100S 077188, 0771851, 087100S N/A
.673 6.66 5.81 7300 130 70MS7 N/A
1.2mm 6.60 5.75 8050 130 70MS7 076188, 0761851, 086100S 077188, 0771851, 087100S N/A
1.2mm 6.60 5.75 8050 130 70MS7 N/A N/A 001811
1.2mm 6.93 6.08 9090 130 70MS7 N/A N/A N/A
1.2mm 6.93 6.08 9090 130 TR553 N/A N/A 001811
1.2mm N/A 4.92 10500 130 TR553 N/A N/A 001811
0.1mm N/A 5.50 10500 130 TR554D N/A N/A 001821
1.2mm 6.79 5.81 8500 132 TR555D N/A N/A 001501
.673 6.60 5.76 7300 130 TR553E N/A 001501
3.88 N/A TR555E 076188, 0761851, 086100S N/A 001811
.722 N/A 2.75 11400 130 TR555E N/A N/A 001811
N/A 4.68 TR553E N/A 001811
.722 0.56 N/A 11000 130 TR553E N/A 077155 001811
0.1mm 3.88 N/A 12300 130 TR555E N/A 001811
N/A 2.75 TR552 076155 N/A 001811
0.1mm N/A 4.68 12300 130 TR553 076155 001811
N/A 6.12 TR553E 077188, 0771851, 087100S
0.1mm 3.50 N/A 12300 130 TR555E N/A 077188, 0771851, 087100S 001811
1.2mm N/A 2.38 12800 130 TR552 N/A
N/A 5.30 TR555E 076188, 0761851, 086100S N/A
0.1mm 1.00 N/A 12300 130 TR553E 076188, 0761851, 086100S N/A
N/A TR553E 005811 N/A
0.1mm 0 12800 130 N/A 077188, 0771851, 087100S
2.00 076188, 0761851, 086100S N/A
0.1mm N/A 12800 130 076188, 0761851, 086100S N/A

0.1mm 12800 130 N/A 077188, 0771851, 087100S

N/A 077188, 0771851, 087100S


nut for use. Six (6) threads are recommended.

MEDIUM DUTY DATA

SURFACE OPTION CODES MOUNTING SYSTEM O

Size P/N Replaces P/N Approx. Finish Dura-Bright® Bolt Bolt Bolt Hole Hub Outs
16x6J Wgt (lbs) Options Options Holes Circle Diameter Bore 5.04

MEDIUM DUTY 26000x 19 0, 3 0DB 6 8.75 1.28 6.467

Ball Seat 17.5x6.75 66307x 31 0, 2 10 8.75 1.22 6.50 5.55

19.5x6 76332x 34 0DB, 1DB, 2DB 6 8.75 1.28 6.463 5.32

16x7 16704x 21 1 8 6.50 0.62 5.155 N/A
17.5x6.75 66540x 28 1 8 6.50
Cone Seat

0.62 5.155 N/A

16x5.5J 25080x 17 0, 1, 2 0DB, 1DB, 2DB 6 205mm 16mm 161.1mm 4.94

16x6K 16023x 20 1, 2 0DB, 1DB, 2DB 8 6.50 0.67 4.567 5.15

16x6K 16028x 16024x 20 1, 2 0DB, 1DB, 2DB 8 6.50 0.67 4.883 5.40

17.5x6 66480x 66422x 26 0, 1 6 205mm 21mm 160.3mm 5.00

17.5x6.75 66140x 30 1 1DB 8 6.50 0.68 4.77 N/A

17.5x6.75 66347x 30 0, 2 8 275mm 24mm 221.1mm 5.55

19.5x6RW 76280x 31 0, 1, 2 6 205mm 21mm 161.1mm 5.35

19.5x6 76320x 33 0, 1, 2 0DB, 1DB, 2DB 10 225mm 15mm 170.2mm 5.35

Hub Pilot 19.5x6 76380x 33 0, 1, 2 8 225mm 15mm 170.3mm 5.35

19.5x6.75RW 76542x 76449x 31 0, 1, 2 0DB, 1DB, 2DB 8 275mm 26mm 221.1mm 5.55

19.5x6.75RW 76547x 31 0, 1, 2 0DB, 1DB, 2DB 8 275mm 24mm 221.1mm 5.55

19.5x7.5RW 77349x 77340x 38 0, 1, 2 8 275mm 24mm 221.1mm 6.10

19.5x7.5RW 77362x 77360x 38 0, 1, 2 0DB, 1DB, 2DB 10 285.75mm 26mm 220.1mm 6.10

1 Hub cover system kits with part numbers 076185 (front), 077185 (rear), 082122 (front), and 082133 (rear) contain screw-on Hug-A-Lug® nut covers and require a minimum of four (4) threads of the stud to extend above the tightene
2 082012 (30mm kit Front and Rear).
3 Contains replacement lug nuts, bolts, or studs for one front and one rear axle. Required to accommodate the increased thickness of the mounting surface of aluminum wheels compared to steel wheels.
4 Contains replacement lug nuts or studs for one front OR one rear axle only.

OFFSET LOAD RATING Valve Stem Front Hub Cover Rear Hub Cover Nut Cover Only Alcoa Mounting
Hardware Kits
set Inset Max Load Max lnfl (Includes Nut Covers (Includes Nut Covers (Not Intended to
4 4.41 (lbs) (psi) Where Applicable) Where Applicable) Secure Hub Covers)
5 4.72
2 4.61 3200 95 TR553C N/A N/A N/A 4991003 MEDIUM DUTY
A 0.25
A0 5070 125 TR553C N/A N/A 001501 N/A
4 4.55
5 4.59 4190 123 TR553C N/A N/A N/A 4991003
0 4.84
0 4.30 3750 110 TR416S 003167, 004167, 008167 003167, 004167, 008167 000078 N/A
A0
5 4.72 3500 130 TR552 003167, 004167, 008167 003167, 004167, 008167 000078 N/A
5 4.65
5 4.65 2340 80 54MS00 021120 022120 000120 See OEM
5 4.65
2780 95 TR553 003611 003612 000190 N/A
5 4.84
2780 95 TR553 001611, 001681 001612 000190 139987
5 4.84
4000 130 TR554C N/A N/A N/A N/A
0 5.27
6050 130 TR552 001611, 001612 or 001681 001611, 001612 or 001681 000190 N/A
0 5.23
5510 130 TR553C 0821221 2 (33mm kit) 0821331 2 (33mm kit) 001811 N/A

3750 110 TR554C N/A N/A N/A 008017SP4

4000 115 TR553C 001004 001005 N/A See OEM

3750 110 TR553C N/A N/A N/A N/A

0821221 2 (33mm kit) 0821331 2 (33mm kit) 001811 See OEM
5000 130 TR553C 109176A (Stainless 33mm)

140233A (Stainless 33mm)

0821221 2 (33mm kit) 082133¹ ² (33mm kit) 001811 0082003
5000 130 TR553C 109176A (Stainless 33mm)

140233A (Stainless 33mm)

0821221 2 (33mm kit) 0821331 2 (33mm kit) 001811 See OEM
6610 130 TR553C 109176A (Stainless 33mm)

140233A (Stainless 33mm)

6700 130 TR553C 076188, 0761851, 086100S 077188, 0771851, 087100S 001811 See OEM

ed cap nut for use. Six (6) threads are recommended.

The New Alcoa Dura-Bright® EV Wheel

A FORCE EV LVED

Alcoa’s third generation Dura-Bright® EV Wheels
feature a new, no-polish surface treatment that stands
stronger against tough conditions, and is better for
the environment. And when it’s time to clean, a simple
soap and water wash gets you back on the road.
Count on your wheels looking great for the long run.

www.alcoawheels.com/durabright

Alcoa Ultra ONE™ Wheel with MagnaForce™ alloy

40 POUNDS OF PURE MUSCLE.

The only wheel with unmatched strength that delivers
unprecedented weight savings. By shedding 5 pounds
from each 22.5" x 8.25" wheel, Alcoa Ultra ONE™ Wheels
help you save nearly another 100 pounds per rig. That’s
a nice lift to your bottom line.
www.alcoawheels.com/ultraone
Follow us on Twitter @AlcoaWheels

© 2015 Alcoa Inc.

Alcoa Wheel Products | 1616 Harvard Avenue | Cleveland, Ohio 44105 | (800) 242-9898 | www.alcoawheels.com