Portfolio 2023 Ponrit Sraruk Instrument Engineer | Automation Engineer [email protected] 087-3724671 Experienced Automation Engineer with 3 years in the HVAC industry. My vast experience in Control Systems ( creating PLC programs and Commissioning ) Contact
Education 2015 – 2018 Bachelor of Engineering (Instrument Engineering) King Mongkut's Institute of Technology Ladkrabang GPA: 2.33 2009 - 2014 Science-Math Program Petcharik Demonstration School Internship June-July 2018 I was an intern at Thai Aviation Refuelling Co., Ltd (TARCO) Training in the technical and maintenance field to follow the procedure of hydrant network project with hydrostatic testing in pre-commissioning (such as monitoring) DCS in Bangkok Aviation Fuel Services Co., Ltd (BAFS) oil depot. Work Experience 2019 - Present Automation Engineer Dixell Asia 2020 AHU Control (Isolation Room, Operation Room) @Chalermphrakiat Building Phramongkutklao : Hospital Type Control: AHU Control Create PLC and Keypad Monitor (HMI) Program / Inspect DDC wiring / Config Sensors / Commissioning Operation / Room follows specification requirements / Report and Solve problems in all phases of Commissioning / Training Hardware and Software Building Automation System (BAS) @Family Mart Muangthong Type Control: BAS (Lighting and A/C) Create PLC Program following sequence requirements / Designed load condition usage / Config Sensors / Commissioning Operation Room follows specification requirements / Report and Solve problems in all phases of Commissioning 2021 Chiller Plant Management System (CPMS) @Bangkok Life Assurance PCL Type Control: Chiller Plant Management system (CPMS) Design Communication in SCADA system / Config Chiller Panel and VSD for communicating with SCADA system (Modbus) / Config Sensors / Create PLC Program following sequence requirements / Commissioning system / Report and Solve problems in all phases of Commissioning / Training Hardware and Software Chiller Plant Management System (CPMS) @MTL Muangthai Life Headquarter Building Type Control: Chiller Plant Management system (CPMS) Config Chiller Panel and VSD for communicating with SCADA system (Modbus) / Config Sensors / Create PLC Program following sequence requirements / Commissioning system / Report and Solve problems in all phases of Commissioning Building Energy Management System (BEMS) @Lotus Talad 32 stores Type Control: Building Energy Management System (BEMS) Survey for work planning and scheduling order / Design a new circuit group for Lighting Control / Set up a Network about Dixell VPN and Lotus VPN (VMware) / Set up a Network to Lotus Server / Create PLC Program and Download / Config Sensor / Config Power Meter / Commissioning System / Training Hardware and Software Ponrit Sraruk Tel. 0873724671 E-mail [email protected] 1333/268 floor.9 The line Wongsawang Building. Krungthep – Nonthaburi Road Wongsawang , Bangsue , Bangkok 10520 RESUME Summary Experienced Automation Engineer with three years in the HVAC industry. My vast experience in Control Systems (creating PLC programs and Commissioning) makes me a very flexible,agile, and a driven person knowledgeable in both the basics and the advanced methods, approaches, and theories of engineering; Capable of multi-tasking and Excellent time management skills necessary in accomplishing tasks Qualifications • Comprehensive understanding of control and electrical engineering knowledge • Understanding of programmable logic control software and HMI i.e. Isagraf (Dixell Asia PLC) • Understanding of Data Communication (Modbus TCP/IP, Modbus RTU RS485) • Knowledge of Low Voltage (DDC control) • Experience in HVAC systems and general device functionality • Enthusiastic and Quick learner • Solves problems through theoretical and factual data. Computers and Applications Microsoft Visual C# Isagraf 5 (Dixell(Emerson) PLC Program) Modbus Poll (Modbustools) Microsoft Office (Word, Excel, PowerPoint) Objective To obtain a Challenging Instrument Engineer position in a high-quality engineering environment and sustainable organization where my academic, skill and experience in this field add value to Organization Languages Native language THAI Good in English ( TOEIC score 665 points ) 01 02
2022 Building Energy Management System (BEMS) @Lotus Talad 35 stores Type Control: Building Energy Management System (BEMS) Survey for work planning and scheduling order / Design a new circuit group for Lighting Control / Set up a Network about Dixell VPN and Lotus VPN (VMware) / Set up a Network to Lotus Server / Create PLC Program and Download / Config Sensor / Config Power Meter / Commissioning System / Training Hardware and Software AHU Control (Operation Room 30 units) @Walailak Medical Center Type Control: AHU Control Create PLC (OAU, Operation Room type, and Isolation Room) and Keypad Monitor (HMI) Program (For OAU type) / Inspect DDC wiring / Config Sensors / Commissioning Operation Room follows specification requirements / Calibrate Offset sensor value from software / Report and Solve problems in all phases of Commissioning / Training Hardware and Software Personal Finished Military Service Training of Territorial Defence Course. Driving License Curricular Activities 2012 Joined a basketball, Duarn-Sib Games 2013 Joined a basketball, Nakhon Sri Thammarat Games 2016 Staff of INS Camp#3 At KMITL 2017 Activist of INS Camp#4 At KMITL 2019 The senior project was selected to present in “ ICA SP-CON 2019 ” at Sirindhorn International Institute of Technology ( SIIT ), Thammasat University ( Rangsit Campus ) 03 04 Projects.
2020 AHU Control (Isolation Room, Operation Room) at Chalermphrakiat Building Phramongkutklao My Responsibilities include • Create PLC and Keypad Monitor (HMI) Program • Inspect DDC wiring • Config Sensors • Commissioning Operation Room follows specification requirements • Report and Solve problems in all phases of Commissioning • Training Hardware and Software Type Control: AHU Control Chalermphrakiat Building is a general building in the hospital consisting of Wards, Operation Rooms, Emergency Rooms ETC. This Building is cooled by Chillers. In this project, our task was to control the air circulation, temperature, and humidity control. 05 06
2021 Building Automation System (BAS) at Family Mart Muangthong Family Mart Muangthong is Convenience Store that integrates with BAS. it is designed to optimize using energy. And show real-time and historical data with a dashboard interface (Web Client) My Responsibilities include • Create PLC Program following sequence requirements • Designed load condition usage • Config Sensors • Commissioning Operation Room follows specification requirements • Report and Solve problems in all phases of Commissioning Type Control: BAS (Lighting and A/C) 2021 Chiller Plant Management System (CPMS) at Bangkok Life Assurance PCL Bangkok Life Assurance Headquarters is an Office building that integrates with BAS and CPMS. It is designed to optimize using energy with a SCADA system My Responsibilities include • Design Communication in SCADA system • Config Chiller Panel and VSD for communicating with SCADA system (Modbus) • Config Sensors • Create PLC Program following sequence requirements • Commissioning system • Report and Solve problems in all phases of Commissioning • Training Hardware and Software Type Control : Chiller Plant Management system (CPMS) 07 08
2021 Chiller Plant Management System (CPMS) at MTL Muangthai Life Headquarter Building My Responsibilities include • Config Chiller Panel and VSD for communicating with SCADA system (Modbus) • Config Sensors • Create PLC Program following sequence requirements • Commissioning system • Report and Solve problems in all phases of Commissioning Type Control : Chiller Plant Management system (CPMS) Muang Thai Life Assurance Building is an Office building that uses CPMS. It is designed to optimize using energy with SCADA system Walailak Medical Center is a general building in the hospital consisting of Wards, Operation Rooms, Emergency Rooms ETC. This Building is cooled by Chillers. In this project, our task was to control the air circulation, temperature, and humidity control My Responsibilities include • Create PLC Program following sequence requirements • Designed load condition usage • Config Sensors • Commissioning Operation Room follows specification requirements • Report and Solve problems in all phases of Commissioning 2022 AHU Control (Operation Room 30 units) at Walailak Medical Center Type Control: AHU Control 09 10
My Responsibilities include • Survey for work planning and scheduling order • Design a new circuit group for Lighting Control • Set up a Network about Dixell VPN and Lotus VPN (VMware) • Set up a Network to Lotus Server • Create PLC Program and Download • Config Sensor • Config Power Meter • Commissioning System • Training Hardware and Software 2021 - 2022 Building Energy Management System (BEMS) at Lotus Talad Phase A 32 stores / Phase B 35 stores Type Control : Building Energy Management System (BEMS) Lotus’s Talad is a convenience store that integrates with BEMS. it is designed to optimize using energy by Control Lighting and the A/C system including the installed Power Meter for analysis and reporting With the SCADA system 11 12
2018 Internship at Thai Aviation Refuelling Co., Ltd (TARCO) 2019 The senior project was selected to present in “ ICA SP-CON 2019 ” at Sirindhorn International Institute of Technology ( SIIT ), Thammasat University References. 13 14