LOW ESR TANTALUM
CHIP CAPACITORS
T Y P E E S R
FEATURES
• Very low equivalent series resistance, ideal for power supplies • Operating temperature range –55°C to +125°C, 2/3 x Vr (linear derating)
• High ripple and surge current capability above +85°C
• Meets or exceeds EIA 535 BAAC and IECQ standards • Precision molded case with flat surfaces for vacuum pick-up
(QC300801/US0001, IS-28) • Laser marking and bold videcon—readable polarity stripe
• Pre-conditioned, surge current tested for maximum robustness • Compliant terminations
• Capacitance range: 1.0 µf to 680 µf • Glue pad on underside for bonding to circuit board prior to soldering
• Voltage range: 4 to 50 WVDC • Encapsulant material satisfies the UL 94 VO flammability classification
DIMENSIONS Millimeters (Inches)
Case EIA L±0.2 W1±0.2 W2±0.1 H±0.2 P±0.3
Size Code (±0.008) (±0.008) (±0.004) (±0.008) (±0.012)
A 3216 3.2 (.126) 1.6 (.063) 1.2 (.047) 1.6 (.063) 0.8 (.031)
B 3528 3.5 (.138) 2.8 (.110) 2.2 (.087) 1.9 (.075) 0.8 (.031)
C 6032 6.0 (.236) 3.2 (.126) 2.2 (.087) 2.5 (.098) 1.3 (.051)
D 7343 7.3 (.287) 4.3 (.169) 2.4 (.094) 2.8 (.110) 1.3 (.051)
H 7343H 7.3 (.287) 4.3 (.169) 2.4 (.094) 4.1 (.162) 1.3 (.051)
LOW ESR PART NUMBERS AND ELECTRICAL SPECIFICATIONS
DCL tan∂ Maximum ESR Maximum Ripple Current at 100KHz
SMEC P/N (uA)max. max% at 100KHz milliohms 25° C 85° C 125° C
4 V
ESR100-680K4D 27.2 14 100 1284 1156 513
6.3 V
ESR1800-6.8K6.3A 0.5 6 1800 204 184 82
ESR1500-10K6.3A 0.6 6 1500 224 200 89
ESR1500-15K6.3A 0.9 6 1500 224 200 89
ESR900-22K6.3A 1.4 6 900 289 260 115
ESR600-22K6.3B 1.4 6 600 376 339 151
ESR600-33K6.3B 2.1 6 600 376 337 151
ESR400-33K6.3C 2.1 6 400 474 427 190
ESR500-47K6.3B 3 6 500 412 371 165
ESR300-47K6.3C 3 6 300 606 545 242
ESR500-68K6.3B 4.3 6 500 412 371 165
ESR150-68K6.3C 4.3 6 150 856 766 343
ESR200-68K6.3C 4.3 6 200 742 667 297
ESR150-100K6.3C 6.3 6 150 856 766 343
ESR150-150K6.3C 9.5 6 150 856 771 343
ESR250-150K6.3C 6.3 6 250 663 597 265
ESR125-150K6.3D 9.5 6 125 1095 980 438
ESR100-220K6.3C 13.9 10 100 1049 944 420
ESR250-220K6.3C 13.9 10 250 663 597 265
ESR100-220K6.3D 13.9 8 100 1125 1102 490
ESR100-330K6.3D 20.8 8 100 1125 1102 490
ESR100-330K6.3H 20.8 8 100 1285 1149 514
ESR150-330K6.3H 20.8 8 150 1049 944 420
ESR100-470K6.3D 29.6 12 100 1225 1102 490
ESR200-470K6.3D 29.6 12 200 866 779 346
ESR50-470K6.3H 29.6 10 50 1817 1635 727
ESR100-470K6.3H 29.6 10 100 1285 1156 514
Web Site: http://www.smec-inc.com Return to e-mail: [email protected]
Contents Page
24
LOW ESR PART NUMBERS AND ELECTRICAL
SPECIFICATIONS
DCL tan∂ Maximum ESR Maximum Ripple Current at 100KHz
SMEC P/N (uA)max. max% at 100KHz milliohms 25° C 85° C 125° C
10 V
ESR1800-2.2K10A 0.5 6 1800 204 184 82
ESR1400-4.7K10A 0.5 6 1400 231 208 93
ESR1800-6.8K10A 0.7 6 1800 204 184 82
ESR1800-10K10A 1 6 1800 204 183 82
ESR1000-15K10A 1.5 6 1000 274 246 110
ESR500-22K10B 2.2 6 500 412 371 165
ESR700-22K10B 2.2 6 700 348 312 139
ESR500-33K10B 3.3 6 500 412 371 165
ESR650-33K10B 3.3 6 650 362 325 145
ESR375-33K10C 3.3 6 375 542 484 217
ESR500-33K10C 3.3 6 500 469 420 188
ESR500-47K10B 4.7 8 500 412 371 165
ESR650-47K10B 4.7 8 650 362 325 145
ESR350-47K10C 4.7 6 350 561 501 224
ESR100-47K10D 4.7 6 100 1125 1102 490
ESR200-68K10C 6.8 6 200 741 667 296
ESR300-68K10C 6.8 6 300 605 544 242
ESR150-68K10D 6.8 6 150 1000 900 400
ESR100-100K10C 10 8 100 1049 944 420
ESR200-100K10C 10 8 200 742 667 297
ESR65-100K10D 10 6 65 1519 1367 607
ESR80-100K10D 10 6 80 1369 1225 548
ESR100-100K10D 10 6 100 1225 1095 490
ESR150-100K10D 10 6 150 1000 900 400
ESR100-150K10D 15 6 100 1225 1095 490
ESR100-220K10D 22 8 100 1125 1102 490
ESR150-220K10D 22 8 150 1000 894 400
ESR60-220K10H 22 8 60 1658 1483 663
ESR100-220K10H 22 8 100 1285 1149 514
ESR150-220K10H 22 8 150 1049 944 420
ESR100-330K10D 33 8 100 1225 1102 490
ESR150-330K10D 33 8 150 1000 900 400
ESR60-330K10H 33 8 60 1658 1483 663
ESR100-330K10H 33 8 100 1285 1149 514
ESR50-470K10H 33 10 50 1817 1625 727
ESR100-470K10H 47 10 100 1285 1149 574
ESR200-470K10H 47 10 200 908 817 363
16 V
ESR1800-2.2K16A 0.5 6 1800 204 183 81
ESR3500-2.2K16A 0.5 6 3500 146 131 59
ESR3500-3.3K16A 0.5 6 3500 146 131 59
ESR2000-4.7K16A 0.8 6 2000 194 174 77
ESR1500-4.7K16B 0.8 6 1500 238 214 95
ESR1800-4.7K16B 0.8 6 1800 217 195 86
ESR1200-6.8K16B 1.1 6 1200 266 240 106
ESR800-10K16B 1.6 6 800 326 293 130
ESR800-15K16B 2.4 6 800 326 292 130
ESR375-22K16B 3.5 6 375 476 428 190
SMEC Telephone (512) 331-1877 Contents Page Fax (512) 335-0444
Return to
25
LOW ESR PART NUMBERS AND ELECTRICAL
SPECIFICATIONS
DCL tan∂ Maximum ESR Maximum Ripple Current at 100KHz
SMEC P/N (uA)max. max% at 100KHz milliohms 25° C 85° C 125° C
16 V continued
ESR600-22K16B 3.5 6 600 376 338 150
ESR300-22K16C 3.5 6 300 605 545 242
ESR375-22K16C 3.5 6 375 542 484 217
ESR300-33K16C 5.3 6 300 606 545 242
ESR350-47K16C 7.5 6 350 561 501 224
ESR150-47K16D 7.5 6 150 1000 894 400
ESR200-68K16C 10.9 6 200 741 667 296
ESR150-68K16D 10.9 6 150 1000 894 400
ESR100-100K16D 16 6 100 1225 1102 490
ESR125-100K16D 16 6 125 1095 980 438
ESR100-100K16H 16 6 100 1285 1149 514
ESR125-150K16D 24 6 125 1095 986 438
ESR150-150K16D 24 6 150 1000 900 400
ESR100-220K16H 35.2 10 100 1285 1156 514
20 V
ESR3000-2.2K20A 0.5 6 3000 158 142 63
ESR2500-3.3K20A 0.7 6 2500 173 156 69
ESR1800-4.7K20A 0.9 6 1800 204 183 82
ESR700-6.8K20C 1.4 6 700 396 357 159
ESR1000-10K20B 2 6 1000 292 261 117
ESR700-10K20C 2 6 700 396 357 159
ESR450-15K20C 3 6 450 494 442 198
ESR400-22K20C 4.4 6 400 524 472 210
ESR300-22K20D 4.4 6 300 707 636 283
ESR200-33K20D 6.6 6 200 866 775 346
ESR200-47K20D 9.4 6 200 866 779 346
ESR125-47K20H 9.4 6 125 1149 1034 460
ESR150-47K20H 9.4 6 150 1049 938 420
ESR200-68K20D 13.6 6 200 866 779 346
ESR300-68K20D 13.6 6 300 707 636 283
ESR125-68K20H 13.6 6 125 1149 1028 460
ESR150-68K20H 13.6 6 150 1049 938 420
ESR150-100K20H 20 6 150 1049 944 420
ESR200-100K20H 20 6 200 908 817 363
25 V
ESR3000-1.5K25A 0.4 6 3000 158 141 63
ESR2500-2.2K25B 0.6 6 2500 184 166 74
ESR2000-3.3K25B 0.8 6 2000 206 186 82
ESR700-3.3K25C 0.8 6 700 396 357 159
ESR1500-4.7K25B 1.2 6 1500 238 213 95
ESR600-6.8K25C 1.7 6 600 428 385 171
ESR700-6.8K25C 1.7 6 700 396 357 159
ESR500-10K25C 2.5 6 500 469 420 188
ESR300-15K25D 3.8 6 300 707 636 283
ESR200-22K25D 5.5 6 200 866 775 346
ESR300-33K25D 8.3 6 300 707 636 283
ESR175-33K25H 8.3 6 175 971 868 388
Web Site: http://www.smec-inc.com Return to e-mail: [email protected]
Contents Page
26
LOW ESR PART NUMBERS AND ELECTRICAL
SPECIFICATIONS
DCL tan∂ Maximum ESR Maximum Ripple Current at 100KHz
SMEC P/N (uA)max. max% at 100KHz milliohms 25° C 85° C 125° C
25 V continued
ESR200-33K25H 8.3 6 200 908 812 363
ESR250-47K25D 8.3 6 250 775 697 310
ESR125-68K25H 17 6 125 1149 1034 459
ESR200-68K25H 17 6 200 908 817 363
35 V
ESR3000-1K35A 0.5 4 3000 158 142 63
ESR2000-1K35B 0.5 4 2000 206 186 82
ESR2500-1.5K35B 0.5 6 2500 184 166 74
ESR2000-2.2K35B 0.8 6 2000 206 186 82
ESR700-3.3K35C 1.2 6 700 396 357 159
ESR1500-4.7K35B 1.6 6 1500 238 213 95
ESR600-4.7K35C 1.6 6 600 428 383 171
ESR500-6.8K35D 2.4 6 500 548 493 219
ESR300-10K35D 3.5 6 300 707 632 283
ESR200-10K35H 3.5 6 200 908 817 363
ESR450-15K35C 5.3 6 450 494 445 198
ESR300-15K35D 5.3 6 300 707 632 283
ESR400-22K35D 7.7 6 400 612 548 245
ESR200-22K35H 7.7 6 200 908 812 363
ESR300-22K35H 7.7 6 300 742 663 297
ESR300-33K35D 11.6 6 300 707 636 283
ESR200-47K35H 16.5 6 200 908 817 363
ESR250-47K35H 16.5 6 250 812 731 325
50 V
ESR700-4.7K50D 2.4 6 700 463 417 185
ESR600-6.8K50D 3.4 6 600 500 450 200
M = ± / -20% tolerance available.
ESR values presented in the tables are based on the industry standard 100KHz sinusoidal waveform with 2.2 DC bias.
Ripple Ratings are based on ESR levels as supplied and power dissipation for D case size is 150 mW.
Allow 25% increase to ripple ratings post PCB assembly.
Packaging: 500 pcs. / per reel, reel size 7 in. standard. 3,000 pcs. / per reel, reel size 13 in. available.
ROHS compliant parts would be identified with suffix “F”
Capacitance Code in pF
DC Working Voltage
G:4V J:6.3V A:10V C:16V
D:20V E:25V V:35V H:40V
T:50V
Polarity
SMEC Telephone (512) 331-1877 Contents Page Fax (512) 335-0444
Return to
27
FILM CHIP
CAPACITOR ARRAY
T Y P E F C A
FEATURES APPLICATIONS
Compact size for space saving • Input/Output ports circuits
Excellent solderability • LCD monitors and Panel circuits
• EMI applications
CONSTRUCTION & DIMENSIONS (mm)
Type L W t a c d p
1206 3.20 ± 0.30 1.60 ± 0.20 0.50 ± 0.10 0.50 ± 0.20 0.30± 0.20 0.30 ± 0.20 0.80 Typ
CIRCUIT
GENERAL SPECIFICATIONS
Item Specification
Capacitance Range 10~220pf
Capacitance Tolerance ±10% (K), ±20% (M) C1 = C2 = C3 = C4
Temperature Characteristic C:+20%/-20% (-25°C~+50°C)
Dissipation factor Less than 3.0% (25°C, 1kHz*,1Vrms)
Operating Temperature Range -25°C~+85°C
ORDERING INFORMATION
Rate Applied 25V
RECOMMENDED PAD SIZE FCA – 221 K T F=ROHS/Lead Free
Packing
T: Tape & Reel
A1 B1 P1 L1 Type
0.8 0.5 0.8 2.6
Capacitance Symbol
(three digit in pF) Tolerance
PACKAGING K: ±10%
M: ±20%
TAPE & REEL = 5000 PCS./Reel
Test condition is 1kHz, 1Vrms ±10% and the environment temperature is
25°C ± 2°C. If the measuring frequency is 1Mhz, the measurement value ATTENUATION CHARACTERISTICS
may be different.
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
35 Contents
MULTILAYER
CHIP CAPACITORS
T Y P E M C C
CONSTRUCTION
1 2
3
1. Ceramic Dielectric 4. Nickel Barrier Layer
4 2. Inner Electrode (Palladium/Silver) 5. Solder Plating (Sn-100% Matte Tin)
5
3. Inner Termination (Palladium/Silver)
DIMENSIONS (Unit: mm)
EIA (Size Code) 8 0 1 2 3 4 5 6 7*
+ 0.35 (0201) (0402) (0603) (0805) (1206) (1210) (1812) (2220) (1808)
0.5 – 0.25 Dimension
L 0.6±0.03 1.0 ± 0.05 1.6 ± 0.2 2.0 + 0.3 3.2 ± 0.15 3.2 ± 0.4 4.5 ± 0.4 5,7 ± 0.4 4.5 ± 0.4
H – 0.1
+ 0.25
W 0.3 ± 0.03 0.5 ± 0.05 0.8 ± 0.2 1.25– 0.15 1.6 ± 0.15 2.5 ± 0.3 3.2 ± 0.3 5.0 ± 0.4 2.0 ± 0.2
L
W 0.6 ± 0.1 0.6 ± 0.1
H 0.3 ± 0.03 0.5 ± 0.05 1.25 ‡ 1uF 1.25 ‡ 1uF 1.80 Max 2.5 Max 2.2 Max 2.75 Max 2.2 Max
Max Max
*High capacitance values only.
ORDERING INFORMATION
MCC E 101 J 3 N 0 T F LEAD FREE / ROHS
PACKAGING: T= Tape & Reel
TEMPERATURE CHARACTERISTIC: O = NPO, R = X7R, S=X5R, T=X6S, W=X7S, U = Z5U, V = Y5V
END TERMINATION: N = Pd, Ag, Ni, SOL
SIZE: 8=0201, 0 = 0402, 1 = 0603, 2 = 0805, 3 = 1206, 4 = 1210, 5 = 1812, 6 = 2220, 7 = 1808
TOLERANCE: B = ± 0.1pF, C = ± 0.25pF, D = ± 0.5pF, F = ±1%, G = ± 2%, J = + 5%,
K= ± 10%, M = ± 20%, Z = + 80 – 20%, (B, C, D, F≤ 1000pF)
CAPACITANCE: 3 digit code in pF
VOLTAGE: G=4V, J=6.3V, B=10V, A=16V, C=25V, D=35V, E=50V, K=63V, H=100V, N= 200V, I=250V
L=500V, P=630V, Q=1KV, V=2KV, Y=3KV, U=4KV, W=5KV
TYPE: MCC = MULTILAYER CHIP CAPACITORS
TAPING PACKAGE/REEL DIMENSION
Window dimensions (Unit: mm)
Size Code A B
8 0.37 ± 0.06 0.67 ± 0.06
0 0.65 ± 0.05 1.15 ± 0.05
1 1.0 ± 0.2 1.9 ± 0.2
2 1.65 ± 0.2 2.4 ± 0.2
3 2.0 ± 0.2 3.6 ± 0.2
4 2.9 ± 0.2 3.6 ± 0.2
5 3.6 ± 0.2 4.9 ± 0.2
6 5.5 ± 0.3 6.2 ± 0.3
7 2.3 ± 0.2 4.9 ± 0.2
Standard packing quantity
Material Qty/Reel Size Code Thickness (H)
Paper Tape 10,000 pcs/reel 8, 0 0.5
Paper Tape 4,000 pcs/reel 1, 2, 3 0.6, 0.85
Plastic Tape 2,000 pcs/reel 4 1.25 Max.
Plastic Tape 1,000 pcs/reel 5, 7 3.5 Max.
Plastic Tape 500 pcs/reel 6 3.5 Max.
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
Contents
Temperature Characteristic NPO Dielectric X7R/X5R Dielectric Y5V Dielectric Z5U Dielectric
Capacitance Range .5 pF to .012
(@ 0.5 Vrms to 5 Vrms, 1 MHz
Temperature Characteristic NPO Dielectric X7R/X5R Dielectric Y5V Dielectric Z5U Dielectric
Capacitance Range .5 pF to .012
(@ 0.5 Vrms to 5 Vrms, 1 MHz
MULTILAYER CHIP CAPACITORS - TYPE MCC
MULTILAYER CHIP CAPACITORS - TYPE MCC
MULTILAYER CHIP CAPACITORS - TYPE MCCMULTILAYER CHIP CAPACITORS - TYPE MCC
CAPACITANCE VALUE
CAPACITANCE VALUE
CAPACITANCE VALUE CAPACITANCE VALUE
CAPACITANCE VALUECAPACITANCE VALUE
CAPACITANCE VALUECAPACITANCE VALUE
Capaci- NPO/COG Capaci- X7R/X5R
3-Digit 3-Digit
tance 0201 0402 0603 0805 1206 1210 1812 2220 tance 0201 0402 0603 0805 1206 1210 1812 2220
Code Code
Value 25V 50V 100V 50V 100V 50V 100V 50V 100V 50V 100V 50V 100V 50V 100V Value 25V 50V 100V 50V 100V 50V 100V 50V 100V 50V 100V 50V 100V 100V
0R5 0.50 pF 101 100 pF
1R0 1.0 pF 121 120
1R2 1.2 151 150
1R3 1.3 181 180
1R5 1.5 221 220
1R8 1.8 271 270
020 2.0 331 330
2R2 2.2 391 390
2R7 2.7 471 470
030 3.0 561 560
3R3 3.3 681 680
3R9 3.9 821 820
040 4.0 102 1000
4R7 4.7 122 1200
050 5.0 152 1500
5R6 5.6 182 1800
060 6.0 222 2200
6R8 6.8 272 2700
070 7.0 332 3300 16V
080 8.0 392 3900
8R2 8.2 472 4700 16V
090 9.0 562 5600
100 10 682 6800 10V
120 12 822 8200
150 15 103 .01 µF 10V
180 18 123 .012
200 20 153 .015
220 22 183 .018
240 24 223 .022
25V
270 27 273 .027
330 33 333 .033
390 39 393 .039
470 47 473 .047
560 56 563 .056
680 68 683 .068 10V
820 82 823 .082
101 100 104 .1 10V 25V
121 120 124 .12
151 150 154 .15 25V
181 180 184 .18
221 220 224 .22 16V 25V
271 270 274 .27 10V
331 330 334 .33 10V 25V
391 390 394 .39 10V
471 470 474 .47 10V 25V
561 560 564 .56 10V
681 680 684 .68 25V 50V
821 820 824 .82 10V
102 1000 105 1 10V 50V 50V
122 1200 125 1.2
152 1500 155 1.5 50V
182 1800 185 1.8
222 2200 225 2.2 16V 50V
272 2700 335 3.3
25V
332 3300 475 4.7 6.3V 10V
392 3900 685 6.8
16V
472 4700 106 10 25V
10V 10V
562 5600 226 22 16V 25V 50V
682 6800 336 33 10V 25V
822 8200 476 47 25V 25V 35V 25V
103 .01µF 686 68 10V
10V
1 1
0
10V
123 .012 107 100 10V 10V V V 25V 16V
0
153 .015
223 .022
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
MULTILAYER CHIP CAPACITORS - TYPE MCC
CAPACITANCE VALUE
Capaci- Z5U CAPACITANCE VALUE
3-Digit tance 0603 0805 1206 1210 Capaci- Y5V
Code Value 50V 50V 100V 50V 100V 50V 100V 3-Digit tance 0201 0402 0603 0805 1206 1210 1812 2220
102 1000 pF Code Value 25V 25V 50V 25V 50V 25V 50V 25V 50V 25V 50V 50V 50V
152 1500 102 1000 pF
182 1800 152 1500
222 2200 182 1800
272 2700 222 2200
332 3300 272 2700
472 4700 332 3300
562 5600 472 4700
682 6800 562 5600
822 8200 682 6800
103 .01 µF 822 8200
153 .015 103 .01 µF 16V
223 .022 153 .015
273 .027 223 .022 10V
333 .033 273 .027
473 .047 333 .033
683 .068 473 .047 6.3V
104 .1 683 .068
154 .15 104 .1 10V
224 .22 154 .15 16V
334 .33 224 .22
25V
474 .47 274 .27 10V
684 .68 334 .33
16V
105 1.0 474 .47
155 1.5 25V 564 .56 25V
684 .68
105 1.0
155 1.5 35V
225 2.2 50V
335 3.3 6.3V
35V
395 3.9 16V
35V
475 4.7
106 10 10V 16V
226 22 10V 16V 25V
25V
476 47 10V 16V 25V
107 100 10V 10V 16V
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
MULTILAYER CHIP CAPACITORS - TYPE MCC
CAPACITANCE VALUE ( HIGH VOLTAGE )
3-Digit Capaci NPO / COG
Code tance 0402 0603 0805 1206 1210 1808 1812 2220
Vaue 250V 250V 500V 500V 1KV 2KV 500V 1KV 2KV 500V 1KV 2KV 3KV 500V 1KV 2KV 3KV 500V 1KV 2KV 3KV
0R5 0.50 pF
1R0 1.0 pF
1R2 1.2
1R5 1.5
1R8 1.8
020 2.0
2R2 2.2
2R7 2.7
030 3.0
3R3 3.3
3R9 3.9
040 4.0
4R7 4.7
050 5.0
5R6 5.6
060 6.0
6R8 6.8
070 7.0
080 8.0
8R2 8.2
090 9.0
100 10
120 12
150 15
180 18
220 22
270 27
330 33
390 39
200V
470 47
560 56
680 68
820 82
101 100
121 120
151 150
181 180
201 200
221 220
271 270
331 330 200V
391 390
471 470
561 560
621 620
681 680
821 820
102 1000
122 1200
152 1500
182 1800 200V
222 2200
272 2700
332 3300
392 3900
472 4700 250V
562 5600
682 6800
822 8200 250V
103 .01µF
123 .012
153 .015
183 .018
223 .022
273 .027
333 .033
473 .047
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
MULTILAYER CHIP CAPACITORS - TYPE MCC
CAPACITANCE VALUE ( HIGH VOLTAGE )
3-Digit Capaci X7R / X5R
Code tance 0603 0805 1206 1210 1808 1812 2220
Vaue 250V 500V 500V 1KV 2KV 500V 1KV 2KV 500V 1KV 2KV 3KV 500V 1KV 2KV 3KV 500V 1KV 2KV 3KV
101 100 pF
121 120
151 150
181 180
221 220
271 270
331 330
391 390
471 470
561 560
621 620
681 680
821 820
102 1000
122 1200
152 1500
182 1800
222 2200
272 2700
332 3300
392 3900
472 4700
562 5600
682 6800 200V
822 8200
103 .01µF
123 .012
153 .015
183 .018 250V
223 .022 630V
273 .027
333 .033 200V 630V
393 .039
473 .047
563 .056 200V 250V
683 .068 250V
823 .082
104 .1 200V 200V
124 .12
154 .15 250V 250V
184 .18
224 .22 200V 250V 250V
274 .27
334 .33 200V 250V 250V
394 .39
474 .47 200V
564 .56 250V
684 .68 200V
824 .82
105 1 250V
155 1.5 200V 250V
225 2.2
335 3.3 200V
475 4.7
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
LOW PROFILE TANTALUM CHIP
CAPACITORS
T Y P E T C C
FEATURES
Low profile heights. Excellent for PCMCIA applications.
Meets or exceeds EIA 535 BAAC and IECQ standards (QC300801/US0001, IS-28)
Capacitance range from 0.1uF to 470uF
Voltage range from 4 to 35WVDC
Operating temprature range -55°C to +125°C, 2/3 x Vr (linear derating) above +85°C
Surge tested for maximum robustenss
Precision molded case with flat surfaces for vaccum pick up
Laser marking and bold videcon-readable polarity stripe
Compliant terminations
Glue pad on underside for bonding to circuit board prior to soldering
Encapsulant material satisfies the UL94 VO flammability calssification
Termination finish 90% Sn/10% Pb available
MSL (moisture sensitivity level) per IPC/Jedec J-STD-020B is level 1
DIMENSIONS millimeters (inches)
L W 1 H W 2 P
CASE SIZE EIA / IECQ ±0.2 (±0.008) ±0.2 (±0.008) (MAX) ±0.1 (±0.004) ±0.3 (±0.012)
XL 2012-12 2.05 (.080) 1.30 (.050) 1.20 (.047) 1.20 (.047) 0.50 (.020)
AL 3216-12 3.20 (.126) 1.60 (.063) 1.20 (.047) 1.20 (.047) 0.80 (.031)
BL 3528-12 3.50 (.138) 2.80 (.110) 1.20 (.047) 2.20 (.087) 0.80 (.031)
CL 6032-15 6.00 (.236) 3.20 (.126) 1.50 (.059) 2.20 (.087) 1.30 (.051)
DL 7343-20 7.30 (.287) 4.30 (.169) 2.00 (.079) 2.40 (.094) 1.30 (.051)
STANDARD
PACKING 7"
PACKAGING CASE SIZE EIA / IECQ REEL
XL 2012-12 2500 PCS
AL 3216-12 2500 PCS
BL 3528-12 2500 PCS
CL 6032-15 1000 PCS
DL 7343-20 1000 PCS
ORDERING INFORMATION TCC 22 M 20 DL F
↓ ↓ ↓ ↓ ↓ ↓
Series Capacitance Tolerance Voltage Case Size LF/ROHS
Value in uF
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
LOW PROFILE PART NUMBERS AND ELECTRICAL SPECIFICATIONS
DCL tan δ ESR DCL tan δ ESR
Capacitance Capacitance
SMEC Part number (µA) max. (%) max. @100Khz SMEC Part number (µA) max. (%) max. @100Khz
(µF) (µF)
max (Ω) max (Ω)
4 V DC @ 85°C 10 V DC @ 85°C
TCC2.2K4XL 2.2 0.5 6 25.0 TCC1K10XL 1.0 0.5 4 25.0
TCC2.2K4AL 2.2 0.5 6 25.0 TCC1K10AL 1.0 0.5 4 25.0
TCC3.3K4XL 3.3 0.5 6 20.0 TCC1.5K10XL 1.5 0.5 6 20.0
TCC3.3K4AL 3.3 0.5 6 18.0 TCC1.5K10AL 1.5 0.5 6 20.0
TCC4.7K4XL 4.7 0.5 6 12.0 TCC2.2K10XL 2.2 0.5 6 15.0
TCC4.7K4AL 4.7 0.5 6 10.0 TCC2.2K10AL 2.2 0.5 6 12.0
TCC6.8K4XL 6.8 0.5 6 5.2 TCC3.3K10XL 3.3 0.5 6 8.0
TCC6.8K4AL 6.8 0.5 6 8.0 TCC3.3K10AL 3.3 0.5 6 8.0
TCC6.8K4BL 6.8 0.5 6 6.0 TCC3.3K10BL 3.3 0.5 6 6.0
TCC10K4XL 10 0.5 6 7.0 TCC4.7K10XL 4.7 0.5 6 9.0
TCC10K4AL 10 0.5 6 6.0 TCC4.7K10AL 4.7 0.5 6 5.0
TCC10K4BL 10 0.6 6 5.0 TCC4.7K10BL 4.7 0.5 6 5.0
TCC15K4XL 15 0.6 8 4.0 TCC6.8K10XL 6.8 0.7 6 5.2
TCC15K4AL 15 0.6 8 4.0 TCC6.8K10AL 6.8 0.7 6 4.0
TCC15K4BL 15 0.6 6 2.0 TCC6.8K10BL 6.8 0.7 6 4.0
TCC22K4XL 22 0.9 8 3.8 TCC10K10XL 10.0 1.0 20 6.0
TCC22K4AL 22 0.9 8 3.5 TCC10K10AL 10.0 1.0 8 4.0
TCC22K4BL 22 0.9 6 1.9 TCC10K10BL 10.0 1.0 6 3.0
TCC33K4AL 33 1.3 8 1.7 TCC15K10AL 15.0 1.5 6 2.0
TCC33K4BL 33 1.3 6 1.7 TCC15K10BL 15.0 1.5 8 2.8
TCC33K4CL 33 1.3 6 0.6 TCC15K10CL 15.0 1.5 6 0.7
TCC47K4BL 47 1.9 10 2.0 TCC22K10BL 22.0 2.2 8 2.2
TCC47K4CL 47 1.9 6 0.5 TCC22K10CL 22.0 2.2 6 0.6
TCC68K4BL 68 2.7 15 1.5 TCC33K10CL 33.0 3.3 6 1.6
TCC68K4CL 68 2.7 6 0.4 TCC47K10CL 47.0 4.7 6 1.4
TCC100K4BL 100 4.0 14 1.4 TCC47K10DL 47.0 4.7 6 0.5
TCC100K4CL 100 4.0 6 1.3 TCC68K10CL 68.0 6.8 6 1.3
TCC150K4CL 150 6.0 6 1.3 TCC68K10DL 68.0 6.8 6 0.9
TCC150K4DL 150 6.0 6 0.4 TCC100K10CL 100.0 10.0 6 0.4
TCC220K4CL 220 8.8 8 1.2 TCC100K10DL 100.0 10.0 6 0.9
TCC220K4DL 220 8.8 8 0.3 TCC150K10DL 150.0 15.0 6 1.2
TCC330K4DL 330 13.2 12 0.4 TCC220K10DL 220.0 22.0 10 0.5
TCC470K4DL 470 18.8 14 0.9
TCC680K4DL 680 27.2 25 0.2
6.3 V DC @ 85°C 16 V DC @ 85°C
TCC1.5K6.3XL 1.5 0.5 6 25.0 TCC.68K16XL 0.68 0.5 4 25.0
TCC1.5K6.3AL 1.5 0.5 6 25.0 TCC.68K16AL 0.68 0.5 4 25.0
TCC2.2K6.3XL 2.2 0.5 6 20.0 TCC1K16XL 1.00 0.5 4 20.0
TCC2.2K6.3AL 2.2 0.5 6 18.0 TCC1K16AL 1.00 0.5 4 15.0
TCC3.3K6.3XL 3.3 0.5 6 12.0 TCC1K16BL 1.00 0.5 4 5.0
TCC3.3K6.3AL 3.3 0.5 6 9.0 TCC1.5K16XL 1.50 0.5 6 10.0
TCC4.7K6.3XL 4.7 0.5 6 7.0 TCC1.5K16AL 1.50 0.5 6 12.0
TCC4.7K6.3AL 4.7 0.5 6 7.5 TCC2.2K16XL 2.20 0.5 6 6.5
TCC4.7K6.3BL 4.7 0.5 6 6.0 TCC2.2K16AL 2.20 0.5 6 6.0
TCC6.8K6.3XL 6.8 0.5 8 7.0 TCC2.2K16BL 2.20 0.5 6 6.5
TCC6.8K6.3AL 6.8 0.5 6 2.6 TCC3.3K16XL 3.30 0.5 8 5.0
TCC6.8K6.3BL 6.8 0.5 6 5.0 TCC3.3K16AL 3.30 0.5 6 5.0
TCC10K6.3XL 10 0.6 8 6.0 TCC3.3K16BL 3.30 0.6 6 5.0
TCC10K6.3AL 10 0.6 8 4.0 TCC4.7K16AL 4.70 0.8 8 4.5
TCC10K6.3BL 10 0.6 6 4.0 TCC4.7K16BL 4.70 0.8 6 4.5
TCC15K6.3XL 15 0.9 8 4.1 TCC6.8K16AL 6.80 1.1 8 2.4
TCC15K6.3AL 15 0.9 8 4.0 TCC6.8K16BL 6.80 1.1 6 3.5
TCC15K6.3BL 15 1.0 6 3.5 TCC10K16BL 10.00 1.6 8 2.2
TCC22K6.3AL 22 1.3 10 1.8 TCC10K16CL 10.00 1.6 6 2.0
TCC22K6.3BL 22 1.4 8 2.5 TCC15K16BL 15.00 2.4 6 2.0
TCC22K6.3CL 22 1.3 6 0.6 TCC15K16CL 15.00 2.4 6 0.7
TCC33K6.3BL 33 2.1 10 2.5 TCC22K16CL 22.00 3.5 6 1.6
TCC33K6.3CL 33 2.1 6 1.8 TCC33K16CL 33.00 5.3 6 1.5
TCC47K6.3BL 47 2.8 10 1.6 TCC33K16DL 33.00 5.3 6 0.9
TCC47K6.3CL 47 3.0 6 1.5 TCC47K16CL 47.00 7.5 6 0.4
TCC68K6.3CL 68 4.3 6 1.5 TCC47K16DL 47.00 7.5 6 0.7
TCC100K6.3CL 100 6.3 6 0.9 TCC68K16DL 68.00 10.9 6 0.9
TCC100K6.3DL 100 6.3 6 0.9 TCC100K16DL 100.00 16.0 8 0.9
TCC150K6.3CL 150 9.0 8 0.3 TCC150K16DL 150.00 24.0 15 0.3
TCC150K6.3DL 150 9.0 6 0.4 M= ± 20% Tolerance
TCC220K6.3DL 220 13.9 10 0.9
TCC330K6.3DL 330 20.8 8 0.4
TCC470K6.3DL 470 28.2 20 0.2
M= ± 20% Tolerance
SMEC reserves the right to supply higher voltage rating, tighter tolerance and / or lower ESR in the same case size, to the same
reliability standards.
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
LOW PROFILE PART NUMBERS AND ELECTRICAL SPECIFICATIONS
DCL tan δ ESR DCL tan δ ESR
Capacitance Capacitance
SMEC Part number (µA) max. (%) max. @100Khz SMEC Part number (µA) max. (%) max. @100Khz
(µF) (µF)
max (Ω) max (Ω)
20 V DC @ 85°C 35 V DC @ 85°C
TCC.1K20XL 0.1 0.5 4 25.0 TCC.1K35XL 0.10 0.5 4 29.0
TCC.1K20AL 0.1 0.5 4 25.0 TCC.1K35AL 0.10 0.5 4 24.0
TCC.15K20XL 0.15 0.5 4 25.0 TCC.15K35XL 0.15 0.5 4 24.0
TCC.15K20AL 0.15 0.5 4 25.0 TCC.15K35AL 0.15 0.5 4 21.0
TCC.22K20XL 0.22 0.5 4 25.0 TCC.22K35XL 0.22 0.5 4 21.0
TCC.22K20AL 0.22 0.5 4 25.0 TCC.22K35AL 0.22 0.5 4 18.0
TCC.33K20XL 0.33 0.5 4 25.0 TCC.33K35XL 0.33 0.5 4 17.0
TCC.33K20AL 0.33 0.5 4 25.0 TCC.33K35AL 0.33 0.5 4 15.0
TCC.47K20XL 0.47 0.5 4 25.0 TCC.47K35XL 0.47 0.5 4 15.0
TCC.47K20AL 0.47 0.5 4 25.0 TCC.47K35AL 0.47 0.5 4 12.0
TCC.68K20XL 0.68 0.5 4 20.0 TCC.47K35BL 0.47 0.5 4 10.0
TCC.68K20AL 0.68 0.5 4 25.0 TCC.68K35AL .68K 0.5 4 8.0
TCC.68K20BL 0.68 0.5 4 15.0 TCC.68K35BL .68K 0.5 4 8.0
TCC1K20XL 1 0.5 4 20.0 TCC1K35AL 1.00 0.5 4 7.5
TCC1K20AL 1 0.5 4 12.0 TCC1K35BL 1.00 0.5 4 6.5
TCC1K20BL 1 0.5 4 9.0 TCC1.5K35BL 1.50 0.5 6 5.2
TCC1.5K20XL 1.5 0.5 6 9.6 TCC2.2K35BL 2.20 0.8 8 4.2
TCC1.5K20AL 1.5 0.5 6 5.4 TCC3.3K35CL 3.30 1.2 6 1.6
TCC1.5K20BL 1.5 0.5 6 6.5 TCC4.7K35CL 4.70 1.6 6 2.2
TCC2.2K20XL 2.2 0.5 6 6.0 TCC6.8K35DL 6.80 2.3 8 0.9
TCC2.2K20AL 2.2 0.5 6 4.5 TCC10K35DL 10.00 3.5 6 1.0
TCC2.2K20BL 2.2 0.5 6 6.0 TCC15K35DL 15.00 5.3 8 0.6
TCC3.3K20BL 3.3 0.7 6 3.0 TCC22K35DL 22.00 7.7 6 0.5
TCC4.7K20BL 4.7 0.9 6 3.0
TCC6.8K20BL 6.8 1.4 6 2.6
TCC10K20CL 10 2.0 6 1.9
TCC15K20CL 15 3.0 6 1.7
TCC22K20CL 22 4.4 6 1.6
TCC22K20DL 22 4.4 6 0.9
TCC33K20DL 33 6.6 6 0.6
TCC47K20DL 47 9.4 6 0.9
TCC68K20DL 68 13.6 6 0.9
25 V DC @ 85°C 50 V DC @ 85°C
TCC.15K25XL 0.15 0.5 4 24.0 TCC.1K50AL 0.68 0.5 4 19.0
TCC.22K25XL 0.22 0.5 4 21.0 TCC.15K50AL 0.68 0.5 4 16.0
TCC.33K25XL 0.33 0.5 4 17.0 TCC.22K50AL 1.00 0.5 4 13.0
TCC.47K25XL 0.47 0.5 4 15.0 TCC.33K50AL 1.00 0.5 4 11.0
TCC.47K25AL 0.47 0.5 4 14.0 TCC.33K50BL 1.00 0.5 4 11.0
TCC.68K25XL 0.68 0.5 4 13.0 TCC.47K50AL 1.50 0.5 6 9.5
TCC.68K25AL 0.68 0.5 5 10.0 TCC.47K50BL 1.50 0.5 6 9.5
TCC1K25XL 1 0.5 4 8.0 TCC1.0K50CL 2.20 0.5 6 4.4
TCC1K25AL 1 0.5 4 8.0 TCC1.5K50CL 2.20 0.8 6 3.1
TCC1.5K25AL 1.5 0.5 6 5.4 TCC3.3K50DL 2.20 1.7 4 1.7
TCC1.5K25BL 1.5 0.5 6 5.0 TCC4.7K50DL 3.30 2.4 6 1.2
TCC2.2K25BL 2.2 0.6 6 4.5 TCC6.8K50DL 3.30 3.4 6 0.9
TCC3.3K25BL 3.3 0.8 6 3.5 M= ± 20% Tolerance
TCC3.3K25CL 3.3 0.8 6 1.6
TCC4.7K25BL 4.7 1.2 6 3.1
TCC4.7K25CL 4.7 1.2 6 1.2
TCC6.8K25CL 6.8 1.7 6 2.0
TCC10K25CL 10 2.5 6 1.8
TCC15K25DL 15 3.8 6 1.0
TCC22K25DL 22 5.5 6 0.9
TCC33K25DL 33 8.3 6 0.5
TCC47K25DL 47 11.8 6 0.9
M= ± 20% Tolerance
SMEC reserves the right to supply higher voltage rating, tighter tolerance and / or lower ESR in the same case size, to the same
reliability standards.
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
GENERAL SPECIFICATIONS AND PERFORMANCE
°
• Life test Capacitors are subjected to +85 C at rated capacitanoe change within 1-/-10% of the initial value
°
voltage and +125 C at 2/3 x rated voltage for 2000 hours
with 3 ohms circuit i mpedanc-e. The ca pad tors must meet Tan 8 (OF) within the initial value
the following limits after stabilizing at 25 C. DC leakage current within 125% of the initial value
°
• Humidity test Capacitors are sub jected to damp heat capacitance chang,e within +/-5% of the initial value
°
at steady state +40 C with 95% relative humidity. The Tan o (DF) within 125% of the initial value
capacitors must meet the following limits after stabilizing at DC leakage cur!'enl within 125% of the initial value
°
25 C.
• Thermal shock Capacitors are subjected to 5 cycles of 30 capacitance chang,e within +/-5% of the initial value
°
°
minutes at -55 C followed by 30 minutes at +125 C. The Tan o
capacitors must meet the following limits after stabilizing at (DF) within the initial value
2s·c. DC leakage am,enl within the initial value
• S urg.e Current Capacitors shall withstand 3 consecutive
cycles. The capacitors are charged approximately 4 capacitanoe change less than +/-5% of the initial value
se conds at rated voltage thru a low circuit resistance of Tan 8 (OF) within the initial limit
°
approximately ·1 ohm @ +25 C followed by a discharge to DC leakage UJrl'ent within the initial limit
below 1 % of rated voltage. Post lest readings must meet
the following criteria:
°
• Surge Voltage Su rge voltages are performed at 1-25 C,
°
°
1-85 C and +125 C. Capacitors are subject to 1000 cycles capacitance change less than +/-5% of the initial value
of 1.3 x r,ated voltage for 30 seconds followed by a 30 Tan o (DF) within the initial limit
second discharge period. Aft.er stabilizing at room DC leakage current within the lnitial limit
temperature post lest readings must meet the fol lowing
criteria.
Solderability Meels the requir:ements of IEC 68 2.20 TestTa and MIL-.STD-202, Method 208.
Marking Specifications
35V22uf
Capacitance Code in pF
DC Working Voltage
(G:4V J:6.JV A:IOV C:16V D:20V
E:2SV V:35V H:40V T:SOV
Polarity
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
MULTILAYER CERAMIC
HIGH FREQUENCY
CAPACITORS
T Y P E V
CONSTRUCTION
1 2
3 1. Ceramic Dielectric 4. Nickel Barrier Layer
4 5. Solder Plating
5 2. Inner Electrode (Palladium/Silver)
3. Inner Termination (Palladium/Silver)
DIMENSIONS Unit : mm (inch)
+ 0.35
e 0.5 – 0.25 Type (EIA) L W T e
EVK105 1.0 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.25 – 0.1
(0402) (0.039 ± 0.002) (0.020 ± 0.002) (0.020 ± 0.002) (0.010 ± 0.004)
H
L
W
FEATURES APPLICATIONS
• Q values in the high frequency range (1 GHz+) are excellent compared • Suitable for those high frequency applications in which a capacitor with
to other types of multilayer capacitors. both a high Q-value and small size is required such as portable
• The 1005(0402) case size is designed for high density mounting and communications and other wireless applications.
weight reduction in various applications.
ORDERING INFORMATION
E V K 105 RH 4R3 B W — T
Tape & Reel
Type Case Size Thickness (2mm Pitch)
(0402) Tolerance
16V (VDC) B = ±0.1pF 0.5 mm
Solder plated J = ±5%
(End Termination)
Capacitance (pF)
Example — 3 digit code
4R3 = 4.3 pF (R = Decimal Pt.) T.C. PPM/°C
020 = 2pF
CH 0 ± 60
RH –220 ± 60
20 SMEC Telephone (512) 331-1877 Contents Page Fax (512) 335-0444
Return to
MULTILAYER CERAMIC HIGH FREQUENCY
CAPACITORS — TYPE V
SPECIFICATIONS
Temperature
Rated Voltage Characteristics Capacitance Capitance (at 1GHz) Thickness
(DC) Part Numbers [pF] Tolerance Q (min) [mm] Typical Q Value
CH RH
EVK105CH0R5BW 0.5 300 1200
EVK105CH0R6BW 0.6 300 1100
EVK105CH0R7BW 0.7 300 1100
EVK105CH0R8BW 0.8 300 1000
EVK105CH0R9BW 0.9 300 950
EVK105CH010BW 1.0 300 950
EVK105CH1R1BW 1.1 ±0.1pF 280 930
EVK105CH1R2BW 1.2 270 850
EVK105CH1R3BW 1.3 260 740
EVK105CH1R5BW 1.5 240 710
EVK105CH1R6BW 1.6 230 670
EVK105CH1R8BW 1.8 210 650
EVK105CH020BW 2.0 190 610
EVK105CH2R2JW 2.2 180 530
EVK105CH2R4JW 2.4 170 510
EVK105CH2R7JW 2.7 150 460
EVK105CH030JW 3.0 130 390
EVK105CH3R3JW 3.3 ±5% 120 370
EVK105CH3R6JW 3.6 110 360
EVK105CH3R9JW 3.9 99 360
EVK105CH4R3JW 4.3 84 360
EVK105CH4R7JW 4.7 84 340
16V EVK105CH5R1JW 5.1 84 0.5 ± 0.05 320
EVK105RH0R5BW 0.5 300 1100
EVK105RH0R6BW 0.6 300 1000
EVK105RH0R7BW 0.7 300 1000
EVK105RH0R8BW 0.8 300 970
EVK105RH0R9BW 0.9 300 950
EVK105RH010BW 1.0 300 900
EVK105RH1R1BW 1.1 ±0.1pF 280 900
EVK105RH1R2BW 1.2 270 740
EVK105RH1R3BW 1.3 260 700
EVK105RH1R5BW 1.5 240 680
EVK105RH1R6BW 1.6 230 640
EVK105RH1R8BW 1.8 210 620
EVK105RH020BW 2.0 190 570
EVK105RH2R2JW 2.2 180 480
EVK105RH2R4JW 2.4 170 470
EVK105RH2R7JW 2.7 150 420
EVK105RH030JW 3.0 130 360
EVK105RH3R3JW 3.3 ±5% 120 350
EVK105RH3R6JW 3.6 110 340
EVK105RH3R9JW 3.9 99 340
EVK105RH4R3JW 4.3 84 340
EVK105RH4R7JW 4.7 84 320
EVK105RH5R1JW 5.1 84 310
Temperature Characteristics CAPACITANCE VS. Q VALUE (CH T.C.)
Operating Temperature
Temperature Temperature Coefficient range Capacitance 1600
Characteristics Range [ppm/°C] Tolerance 1400
CH 0±60 ±0.1pF (~2.0pF) 1200
–55~+125°C
RH –220±60 ±5% (2.2pF~) 1000
STANDARD PACKING QUANTITY Q (at 1GHz) 800
600
Material Qty/Reel Packing Code 400
Paper Tape 10,000 T 200
Bulk 1,000 B 0
0 1 2 3 4 5 6
Capacitance (pF)
Measured by HP4291A
Web Site: http://www.smec-inc.com Return to e-mail: [email protected]
Contents Page
21
FERRITE
CHIP ARRAYS
T Y P E A C A
FEATURES APPLICATIONS
• One chip can suppress noise on 3, 4, and 6 lines. Especially this chip is appropriate for EMC • Noise suppression for audio lines and headphone lines
suppression of the I/O lines of electronic apparatuses requiring higher density implementation for CD-ROM, DVD, MD, and so on (3-line type).
such as portable apparatuses. • Noise suppression for the I/O lines of notebook PCs,
• M series for general signals and H series for high speed signals (high frequency band) are word processors, digital TVs/VTRs, and portable
available. Noise suppression for various circuit patterns can be performed. communication appratuses.
• Three-line type specific to EMC suppression for audio and headphone lines is also available.
• 4–line type with shape 3216 can be used for replacing a standard chip resister array without
changing soldered land patterns.
ACA3216 TYPE (3- AND 4-LINE) (Unit: mm)
SHAPES AND DIMENSIONS/CIRCUITS/RECOMMENDED PC BOARD PATTERNS (REFLOW SOLDERINGS)
3-LINE 4-LINE
ELECTRICAL CHARACTERISTICS
Impedance (Ω) DC Resistance Rated Current Pitch Built-in Voltage between lines
Part No. [100MHz] (Ω)max. (mA)max. (mm) line number Edc(V)max.
ACA3216M3-600-▫* 600 ± 25% 0.85 100 1 3 12
ACA3216M4-060-▫ 60 ± 25% 0.4 300 0.8 4 12
ACA3216M4-120-▫ 120 ± 25% 1 200 0.8 4 12
ACA3216M4-300-▫ 300 ± 25% 1.7 100 0.8 4 12
ACA3216M4-600-▫ 600 ± 25% 2.3 60 0.8 4 12
ACA3216H4-060-▫ 60 ± 25% 0.5 250 0.8 4 12
ACA3216H4-120-▫ 120 ± 25% 0.8 150 0.8 4 12
ACA3216H4-300-▫ 300 ± 25% 1.7 100 0.8 4 12
TYPICAL ELECTRICAL CHARACTERISTICS
*
IZI, X, R VS. FREQUENCY CHARACTERISTICS
* TEST EQUIPMENT: RF IMPEDANCE ANALYZER YHP4191A
14 SMEC Telephone (512) 331-1877 Contents Page Fax (512) 335-0444
Return to
High-
HIGH IMPEDANCE
FERRITE CHIP BEADS
T Y P E A C B
FEATURES
• High impedance ferrite beads widely used for signal line.
• Excellent for suppressing noise at high frequencies, from several MHz to several hundreds of MHz.
• The chip bead type is best suited for preventing the abnormal oscillation of high frequency amplifying circuits.
• Nickel barrier provides excellent solder heat resistance both flow soldering and reflow soldering are applicable.
APPLICATIONS ORDERING INFORMATION
• Computers and peripherals. ACB1608 – 120 T F=ROHS/Lead Free
Packing
• TVS, VCRS. B: Bulk Pack
• Car — electronic equipment. Type T: Tape & Reel
• Tuners, etc. Impedance in
ohm@100MHz
DIMENSIONS (Unit: mm)
Type L W T EB
+ 0.3 ± 0.3
1608 1.6 ± 0.15 0.8 0.8 0.3 ± 0.2
– 0.1 – 0.1
2012 2 ± 0.2 1.25 ± 0.2 0.9 ± 0.2 0.4 ± 0.2
3216 3.2 ± 0.2 1.6 ± 0.2 0.9 ± 0.2 0.5 ± 0.2
ELECTRICAL CHARACTERISTICS RECOMMENDED PC BOARD PATTERNS
Impedance DC Resistance Rated Current REFLOW AND FLOW SOLDERINGS
Part No. (Ω)(100MHz) (Ω)max. (mA)max.
ACB1608L-015-▫* 15 ± 25% 0.1 500
ACB1608L-030-▫ 30 ± 25% 0.3 400
ACB1608L-060-▫ 60 ± 25% 0.4 300
ACB1608L-120-▫ 120 ± 25% 0.5 200
ACB1608L-300-▫ 300 ± 25% 1.5 200 c
ACB1608M-040-▫ 40 ± 25% 0.3 400
ACB1608M-080-▫ 80 ± 25% 0.5 300
ACB1608M-120-▫ 120 ± 25% 0.7 200 Resist
ACB1608M-300-▫ 300 ± 25% 1.2 150 a b a Land Pattern
ACB1608M-600-▫ 600 ± 25% 1.8 100
ACB1608H-015-▫ 15 ± 25% 0.3 400
ACB1608H-030-▫ 30 ± 25% 0.4 300
ACB1608H-060-▫ 60 ± 25% 0.7 200 Type a b c
ACB1608H-120-▫ 120 ± 25% 1.2 150 ACB1608 1 0.6 0.8
ACB1608H-300-▫ 300 ± 25% 1.8 100
ACB2012L-015-▫ 15 ± 25% 0.1 600 ACB2012 1 1 1
ACB2012L-030-▫ 30 ± 25% 0.3 500 ACB3216 1.1 2.2 1.4
ACB2012L-060-▫ 60 ± 25% 0.4 400
ACB2012L-120-▫ 120 ± 25% 0.5 300
ACB2012L-300-▫ 300 ± 25% 1 250
ACB2012L-600-▫ 600 ± 25% 2 150
ACB2012M-040-▫ 40 ± 25% 0.3 500
ACB2012M-080-▫ 80 ± 25% 0.4 400
ACB2012M-120-▫ 120 ± 25% 0.5 300
ACB2012M-300-▫ 300 ± 25% 0.9 200
ACB2012M-600-▫ 600 ± 25% 1.3 100
ACB2012H-015-▫ 15 ± 25% 0.3 400
ACB2012H-030-▫ 30 ± 25% 0.4 300
ACB2012H-060-▫ 60 ± 25% 0.5 300
ACB2012H-120-▫ 120 ± 25% 0.9 200
ACB2012H-300-▫ 300 ± 25% 1.3 100
ACB2012H-600-▫ 600 ± 25% 2.2 100
ACB3216L-080-▫ 80 ± 25% 0.3 400
ACB3216M-600-▫ 600 ± 25% 0.9 200
*▫ Packaging style (T: Taping [∅180mm reel], TL: Taping [∅ 330mm reel]. B: Bulk)
Web Site: http://www.smec-inc.com Return to e-mail: [email protected]
Contents Page
11
HIGH IMPEDANCE FERRITE CHIP BEADS — TYPE ACB
TYPICAL ELECTRICAL CHARACTERISTICS
*
IZI, X, R VS. FREQUENCY CHARACTERISTICS
* TEST EQUIPMENT: RF IMPEDANCE ANALYZER YHP4191A
12 SMEC Telephone (512) 331-1877 Contents Page Fax (512) 335-0444
Return to
HIGH IMPEDANCE FERRITE CHIP BEADS — TYPE ACB
TYPICAL ELECTRICAL CHARACTERISTICS
*
IZI, X, R VS. FREQUENCY CHARACTERISTICS
* TEST EQUIPMENT: RF IMPEDANCE ANALYZER YHP4191A
Web Site: http://www.smec-inc.com Return to e-mail: [email protected]
Contents Page
13
FILM CHIP
CAPACITOR ARRAY
T Y P E F C A
FEATURES APPLICATIONS
Compact size for space saving • Input/Output ports circuits
Excellent solderability • LCD monitors and Panel circuits
• EMI applications
CONSTRUCTION & DIMENSIONS (mm)
Type L W t a c d p
1206 3.20 ± 0.30 1.60 ± 0.20 0.50 ± 0.10 0.50 ± 0.20 0.30± 0.20 0.30 ± 0.20 0.80 Typ
CIRCUIT
GENERAL SPECIFICATIONS
Item Specification
Capacitance Range 10~220pf
Capacitance Tolerance ±10% (K), ±20% (M) C1 = C2 = C3 = C4
Temperature Characteristic C:+20%/-20% (-25°C~+50°C)
Dissipation factor Less than 3.0% (25°C, 1kHz*,1Vrms)
Operating Temperature Range -25°C~+85°C
ORDERING INFORMATION
Rate Applied 25V
RECOMMENDED PAD SIZE FCA – 221 K T F=ROHS/Lead Free
Packing
T: Tape & Reel
A1 B1 P1 L1 Type
0.8 0.5 0.8 2.6
Capacitance Symbol
(three digit in pF) Tolerance
PACKAGING K: ±10%
M: ±20%
TAPE & REEL = 5000 PCS./Reel
Test condition is 1kHz, 1Vrms ±10% and the environment temperature is
25°C ± 2°C. If the measuring frequency is 1Mhz, the measurement value ATTENUATION CHARACTERISTICS
may be different.
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
35 Contents
High-
MULTILAYER
FERRITE CHIP BEADS
T Y P E F C B
FEATURES
• High impedance for volume.
• Excellent for suppressing noise at high frequencies, from several MHz to several hundreds of MHz.
• The chip bead type is best suited for preventing the abnormal oscillation of high frequency amplifying circuits.
• Nickel barrier provides excellent solder heat resistance both flow soldering and reflow soldering are applicable.
APPLICATIONS ORDERING INFORMATION
FCB0603 – 120 HNT F --> ROHS/Lead Free
• Computers and peripherals. Packing
• TVS, VCRS. B: Bulk Pack
• Car — electronic equipment. Type T: Tape & Reel
• Tuners, etc. Impedance in
ohm@100MHz
Dimensions : mm
DIMENSIONS
Ferrite TYPE A B C D
Terminal Electrode FCB 0402 1.0 ± 0.15 1.50 ± 0.15 0.5 ± 0.15 0.25 ± 0.15
FCB 0608 1.6 ± 0.20 0.80 ± 0.15 0.8 ± 0.15 0.4 ± 0.2
D D
FCB 0805 2.0 ± 0.20 1.25 ± 0.20 0.9 ± 0.20 0.5 ± 0.3
C FCB 1206 3.2 ± 0.20 1.60 ± 0.20 1.1 ± 0.20 0.5 ± 0.3
FCB 1210 3.2 ± 0.20 2.50 ± 0.20 1.3 ± 0.20 0.5 ± 0.3
A B FCB 1806 4.5 ± 0.25 1.60 ± 0.20 1.6 ± 0.20 0.5 ± 0.3
FCB 1812 4.5 ± 0.25 3.20 ± 0.20 1.5 ± 0.20 0.5 ± 0.3
RECOMMENDED PATTERN Dimensions : mm
B TYPE A B C
FCB 0402 0.4 1.2 ~ 1.4 0.4
FCB 0603 0.8 2.4 ~ 3.4 0.6
FCB 0805 1.2 3.0 ~ 4.0 1.0
A
C FCB 1206 2.0 4.2 ~ 5.2 1.2
FCB 1210 2.0 5.5 ~ 6.5 1.8
FCB 1806 3.0 5.5 ~ 6.5 1.2
FCB 1812 3.0 5.5 ~ 6.5 2.4
Solder Land Inductor
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
ELECTRICAL CHARACTERISTICS
SMEC Part Number Size Test Frequency Impedance DC Resistance Rated Current Reel Qty
(MHz) (Ω±25%) (Ω) max. (mA) max.
FCB0402-006HNTF 0402 100 6 0.05 500 10000
FCB0402-010HNTF 0402 100 10 0.05 500 10000
FCB0402-030HNTF 0402 100 30 0.30 300 10000
FCB0402-033HNTF 0402 100 33 0.30 300 10000
FCB0402-040HNTF 0402 100 40 0.30 300 10000
FCB0402-047HNTF 0402 100 47 0.40 300 10000
FCB0402-060HNTF 0402 100 60 0.40 300 10000
FCB0402-070HNTF 0402 100 70 0.40 300 10000
FCB0402-075HNTF 0402 100 75 0.40 300 10000
FCB0402-080HNTF 0402 100 80 0.40 300 10000
FCB0402-090HNTF 0402 100 90 0.50 300 10000
FCB0402-100HNTF 0402 100 100 0.50 300 10000
FCB0402-120HNTF 0402 100 120 0.50 300 10000
FCB0402-150HNTF 0402 100 150 0.50 300 10000
FCB0402-220HNTF 0402 100 220 0.50 300 10000
FCB0402-240HNTF 0402 100 240 0.50 300 10000
FCB0402-300HNTF 0402 100 300 0.80 300 10000
FCB0402-330HNTF 0402 100 330 0.80 300 10000
FCB0402-480HNTF 0402 100 480 0.80 300 10000
FCB0402-600HNTF 0402 100 600 1.00 300 10000
10000
100
0402
15050
1000
100
C
F
FCB0402-1000HNTF 0402 100 1000 1 . 100 10000
B0402
F
1000HNT
-
FCB0402-1500HNTF 0402 100 1500 2.00 60 10000
FCB0603-006HNTF 0603 100 6 0.05 500 4000
FCB0603-007HNTF 0603 100 7 0.05 500 4000
FCB0603-010HNTF 0603 100 10 0.05 500 4000
FCB0603-011HNTF 0603 100 11 0.05 500 4000
FCB0603-015HNTF 0603 100 15 0.08 500 4000
FCB0603-017HNTF 0603 100 17 0.08 500 4000
FCB0603-019HNTF 0603 100 19 0.08 500 4000
FCB0603-020HNTF 0603 100 20 0.10 400 4000
FCB0603-022HNTF 0603 100 22 0.10 400 4000
FCB0603-025HNTF 0603 100 25 0.10 400 4000
FCB0603-026HNTF 0603 100 26 0.10 400 4000
FCB0603-030HNTF 0603 100 30 0.10 400 4000
FCB0603-031HNTF 0603 100 31 0.10 400 4000
FCB0603-032HNTF 0603 100 32 0.10 400 4000
FCB0603-033HNTF 0603 100 33 0.10 400 4000
FCB0603-040HNTF 0603 100 40 0.10 400 4000
FCB0603-047HNTF 0603 100 47 0.10 400 4000
FCB0603-050HNTF 0603 100 50 0.10 400 4000
FCB0603-052HNTF 0603 100 52 0.10 400 4000
FCB0603-055HNTF 0603 100 55 0.10 400 4000
FCB0603-056HNTF 0603 100 56 0.10 400 4000
FCB0603-060HNTF 0603 100 60 0.10 400 4000
FCB0603-068HNTF 0603 100 68 0.15 400 4000
FCB0603-070HNTF 0603 100 70 0.15 400 4000
FCB0603-075HNTF 0603 100 75 0.15 400 4000
FCB0603-080HNTF 0603 100 80 0.15 400 4000
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
ELECTRICAL CHARACTERISTICS
SMEC Part Number Size Test Frequency Impedance DC Resistance Rated Current Reel Qty
(MHz) (Ω±25%) (Ω) max. (mA) max.
FCB0603-090HNTF 0603 100 90 0.20 400 4000
FCB0603-100HNTF 0603 100 100 0.20 400 4000
FCB0603-120HNTF 0603 100 120 0.25 400 4000
FCB0603-140HNTF 0603 100 140 0.25 200 4000
FCB0603-150HNTF 0603 100 150 0.30 200 4000
FCB0603-180HNTF 0603 100 180 0.30 200 4000
FCB0603-200HNTF 0603 100 200 0.30 200 4000
FCB0603-220HNTF 0603 100 220 0.30 200 4000
FCB0603-240HNTF 0603 100 240 0.40 200 4000
FCB0603-300HNTF 0603 100 300 0.40 200 4000
FCB0603-330HNTF 0603 100 330 0.50 200 4000
FCB0603-400HNTF 0603 100 400 0.50 200 4000
FCB0603-420HNTF 0603 100 420 0.50 200 4000
FCB0603-450HNTF 0603 100 450 0.50 200 4000
FCB0603-470HNTF 0603 100 470 0.50 200 4000
FCB0603-500HNTF 0603 100 500 0.50 200 4000
FCB0603-600HNTF 0603 100 600 0.50 200 4000
FCB0603-750HNTF 0603 100 750 0.70 200 4000
FCB0603-800HNTF 0603 100 800 0.70 200 4000
FCB0603-1000HNTF 0603 100 1000 0.70 200 4000
1200
10000
50
0603
F C B0603 - 1200HNT F 0603 100 1200 1 . 50 4000
100
4000
FCB0603-1200HNTF
FCB0603-1500HNTF 0603 100 1500 1.00 50 4000
FCB0603-1700HNTF 0603 100 1700 1.20 50 4000
FCB0603-2000HNTF 0603 100 2000 1.20 50 4000
FCB0603-2200HNTF 0603 100 2200 1.20 50 4000
FCB0603-2500HNTF 0603 100 2500 1.30 50 4000
FCB0603-2700HNTF 0603 100 2700 1.30 50 4000
FCB0805-005HNTF 0805 100 5 0.10 600 4000
FCB0805-007HNTF 0805 100 7 0.10 600 4000
FCB0805-009HNTF 0805 100 9 0.10 600 4000
FCB0805-010HNTF 0805 100 10 0.10 600 4000
FCB0805-011HNTF 0805 100 11 0.10 600 4000
FCB0805-012HNTF 0805 100 12 0.10 600 4000
FCB0805-015HNTF 0805 100 15 0.10 600 4000
FCB0805-017HNTF 0805 100 17 0.10 600 4000
FCB0805-019HNTF 0805 100 19 0.10 600 4000
FCB0805-022HNTF 0805 100 22 0.10 600 4000
FCB0805-026HNTF 0805 100 26 0.10 600 4000
FCB0805-028HNTF 0805 100 28 0.10 600 4000
FCB0805-030HNTF 0805 100 30 0.10 600 4000
FCB0805-031HNTF 0805 100 31 0.10 600 4000
FCB0805-032HNTF 0805 100 32 0.10 600 4000
FCB0805-033HNTF 0805 100 33 0.10 500 4000
FCB0805-039HNTF 0805 100 39 0.10 500 4000
FCB0805-040HNTF 0805 100 40 0.10 500 4000
FCB0805-042HNTF 0805 100 42 0.10 500 4000
FCB0805-047HNTF 0805 100 47 0.10 500 4000
FCB0805-050HNTF 0805 100 50 0.10 500 4000
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
ELECTRICAL CHARACTERISTICS
SMEC Part Number Size Test Frequency Impedance DC Resistance Rated Current Reel Qty
(MHz) (Ω±25%) (Ω) max. (mA) max.
FCB0805-052HNTF 0805 100 52 0.15 500 4000
FCB0805-056HNTF 0805 100 56 0.15 500 4000
FCB0805-060HNTF 0805 100 60 0.15 500 4000
FCB0805-070HNTF 0805 100 70 0.15 500 4000
FCB0805-075HNTF 0805 100 75 0.15 500 4000
FCB0805-080HNTF 0805 100 80 0.15 500 4000
FCB0805-090HNTF 0805 100 90 0.15 500 4000
FCB0805-095HNTF 0805 100 95 0.15 500 4000
FCB0805-100HNTF 0805 100 100 0.25 300 4000
FCB0805-120HNTF 0805 100 120 0.25 300 4000
FCB0805-150HNTF 0805 100 150 0.25 300 4000
FCB0805-180HNTF 0805 100 180 0.30 300 4000
FCB0805-200HNTF 0805 100 200 0.30 300 4000
FCB0805-220HNTF 0805 100 220 0.30 300 4000
FCB0805-240HNTF 0805 100 240 0.30 300 4000
FCB0805-300HNTF 0805 100 300 0.30 300 4000
FCB0805-330HNTF 0805 100 330 0.30 300 4000
FCB0805-400HNTF 0805 100 400 0.30 300 4000
FCB0805-420HNTF 0805 100 420 0.30 300 4000
FCB0805-430HNTF 0805 100 430 0.40 300 4000
450
04040
300
0805
F C B0805 - 450HNT F 0805 100 450 0 . 300 4000
100
4000
FCB0805-450HNTF
FCB0805-470HNTF 0805 100 470 0.40 300 4000
FCB0805-500HNTF 0805 100 500 0.40 300 4000
FCB0805-600HNTF 0805 100 600 0.40 300 4000
FCB0805-680HNTF 0805 100 680 0.40 300 4000
FCB0805-750HNTF 0805 100 750 0.50 200 4000
FCB0805-1000HNTF 0805 100 1000 0.50 200 4000
FCB0805-1200HNTF 0805 100 1200 0.60 200 4000
FCB0805-1500HNTF 0805 100 1500 0.60 200 4000
FCB0805-2000HNTF 0805 100 2000 0.70 200 4000
FCB0805-2200HNTF 0805 100 2200 0.70 200 4000
FCB0805-2500HNTF 0805 100 2500 0.70 200 4000
FCB0805-2700HNTF 0805 100 2700 0.70 200 4000
FCB1206-008HNTF 1206 100 8 0.05 600 3000
FCB1206-009HNTF 1206 100 9 0.05 600 3000
FCB1206-011HNTF 1206 100 11 0.05 600 3000
FCB1206-017HNTF 1206 100 17 0.05 600 3000
FCB1206-019HNTF 1206 100 19 0.05 600 3000
FCB1206-022HNTF 1206 100 22 0.05 600 3000
FCB1206-024HNTF 1206 100 24 0.05 600 3000
FCB1206-025HNTF 1206 100 25 0.05 600 3000
FCB1206-026HNTF 1206 100 26 0.05 600 3000
FCB1206-030HNTF 1206 100 30 0.05 600 3000
FCB1206-031HNTF 1206 100 31 0.05 600 3000
FCB1206-032HNTF 1206 100 32 0.05 600 3000
FCB1206-033HNTF 1206 100 33 0.05 600 3000
FCB1206-035HNTF 1206 100 35 0.10 500 3000
FCB1206-047HNTF 1206 100 47 0.10 500 3000
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
ELECTRICAL CHARACTERISTICS
SMEC Part Number Size Test Frequency Impedance DC Resistance Rated Current Reel Qty
(MHz) (Ω±25%) (Ω) max. (mA) max.
FCB1206-050HNTF 1206 100 50 0.10 500 3000
FCB1206-052HNTF 1206 100 52 0.10 500 3000
FCB1206-060HNTF 1206 100 60 0.10 500 3000
FCB1206-070HNTF 1206 100 70 0.10 500 3000
FCB1206-075HNTF 1206 100 75 0.15 500 3000
FCB1206-080HNTF 1206 100 80 0.15 500 3000
FCB1206-090HNTF 1206 100 90 0.15 500 3000
FCB1206-100HNTF 1206 100 100 0.15 500 3000
FCB1206-120HNTF 1206 100 120 0.15 500 3000
FCB1206-150HNTF 1206 100 150 0.15 500 3000
FCB1206-180HNTF 1206 100 180 0.20 400 3000
FCB1206-200HNTF 1206 100 200 0.20 400 3000
FCB1206-220HNTF 1206 100 220 0.20 400 3000
FCB1206-240HNTF 1206 100 240 0.20 400 3000
FCB1206-300HNTF 1206 100 300 0.20 400 3000
FCB1206-400HNTF 1206 100 400 0.20 400 3000
FCB1206-470HNTF 1206 100 470 0.20 400 3000
FCB1206-500HNTF 1206 100 500 0.20 400 3000
FCB1206-600HNTF 1206 100 600 0.30 400 3000
FCB1206-700HNTF 1206 100 700 0.40 200 3000
1000
04040
1206
50
F C B1206 - 1000HNT F 1206 50 1000 0 . 200 3000
FCB1206-1000HNTF
200
3000
FCB1206-1200HNTF 1206 50 1200 0.40 200 3000
FCB1206-1500HNTF 1206 50 1500 0.45 200 3000
FCB1206-2000HNTF 1206 30 2000 0.60 200 3000
FCB1206-2700HNTF 1206 30 2700 0.60 200 3000
FCB1210-032HNTF 1210 100 32 0.20 500 2500
FCB1210-060HNTF 1210 100 60 0.20 500 2500
FCB1210-090HNTF 1210 100 90 0.20 500 2500
FCB1210-120HNTF 1210 100 120 0.20 500 2500
FCB1806-033HNTF 1806 100 33 0.20 600 2000
FCB1806-050HNTF 1806 100 50 0.20 600 2000
FCB1806-060HNTF 1806 100 60 0.20 600 2000
FCB1806-080HNTF 1806 100 80 0.20 600 2000
FCB1806-085HNTF 1806 100 85 0.20 600 2000
FCB1806-090HNTF 1806 100 90 0.30 500 2000
FCB1806-100HNTF 1806 100 100 0.30 500 2000
FCB1806-150HNTF 1806 100 150 0.30 500 2000
FCB1806-170HNTF 1806 100 170 0.30 500 2000
FCB1812-070HNTF 1812 100 70 0.30 500 1000
FCB1812-120HNTF 1812 100 120 0.30 500 1000
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
TYPICAL ELECTRICAL CHARACTERISTICS
Test Instruments : HP4291A Impedance / Material Analyzer
FCB0603-1000HNT FCB0603-1500HNT FCB0603-007HNT
10000
10000 100
1000 1000 Z 10
IMPEDANCE (Ω) 100 Z IMPEDANCE (Ω) 100 IMPEDANCE (Ω) Z X
10 R X 10 X 1
R
R
1 1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.70Ω Rated Current: 200mA RDC: 1.00Ω Rated Current: 50mA RDC: 0.10Ω Rated Current: 600mA
FCB0805-009HNT FCB0805-011HNT FCB0805-017HNT
100 100 100
IMPEDANCE (Ω) 10 Z X IMPEDANCE (Ω) 10 Z R X IMPEDANCE (Ω) 10 Z X
1
R 1 1
R
0 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.10Ω Rated Current: 600mA RDC: 0.10Ω Rated Current: 600mA RDC: 0.10Ω Rated Current: 600mA
FCB0805-032HNT FCB0805-060HNT FCB0805-070HNT
100 1000 1000
100 100
IMPEDANCE (Ω) X IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10 Z
10
Z
1
R
1 X 1 X
R
R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.10Ω Rated Current: 600mA RDC: 0.15Ω Rated Current: 500mA RDC: 0.15Ω Rated Current: 500mA
FCB0805-080HNT FCB0805-120HNT FCB0805-150HNT
1000 1000 1000
100 100 100 Z
IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10
1 1 X 1 X
X R
R
R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.15Ω Rated Current: 500mA RDC: 0.25Ω Rated Current: 300mA RDC: 0.25Ω Rated Current: 300mA
FCB0805-200HNT FCB0805-300HNT FCB0805-400HNT
1000 1000 1000
100 Z 100 Z 100 Z
IMPEDANCE (Ω) 10 IMPEDANCE (Ω) 10 IMPEDANCE (Ω) 10 X
1 X 1 R X 1 R
R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.30Ω Rated Current: 300mA RDC: 0.30Ω Rated Current: 300mA RDC: 0.30Ω Rated Current: 300mA
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
TYPICAL ELECTRICAL CHARACTERISTICS
Test Instruments : HP4291A Impedance / Material Analyzer
FCB0603-1000HNT FCB0603-1500HNT FCB0603-007HNT
10000
10000 100
1000 1000 Z 10
IMPEDANCE (Ω) 100 Z IMPEDANCE (Ω) 100 IMPEDANCE (Ω) Z X
10 R X 10 X 1
R
R
1 1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.70Ω Rated Current: 200mA RDC: 1.00Ω Rated Current: 50mA RDC: 0.10Ω Rated Current: 600mA
FCB0805-009HNT FCB0805-011HNT FCB0805-017HNT
100 100 100
IMPEDANCE (Ω) 10 Z X IMPEDANCE (Ω) 10 Z R X IMPEDANCE (Ω) 10 Z X
1
R 1 1
R
0 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.10Ω Rated Current: 600mA RDC: 0.10Ω Rated Current: 600mA RDC: 0.10Ω Rated Current: 600mA
FCB0805-032HNT FCB0805-060HNT FCB0805-070HNT
100 1000 1000
100 100
IMPEDANCE (Ω) X IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10 Z
Z
10
1
R
1 X 1 X
R
R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.10Ω Rated Current: 600mA RDC: 0.15Ω Rated Current: 500mA RDC: 0.15Ω Rated Current: 500mA
FCB0805-080HNT FCB0805-120HNT FCB0805-150HNT
1000 1000 1000
100 100 100 Z
IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10
1 1 X 1 X
X R
R
R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.15Ω Rated Current: 500mA RDC: 0.25Ω Rated Current: 300mA RDC: 0.25Ω Rated Current: 300mA
FCB0805-200HNT FCB0805-300HNT FCB0805-400HNT
1000 1000 1000
100 Z 100 Z 100 Z
IMPEDANCE (Ω) 10 IMPEDANCE (Ω) 10 IMPEDANCE (Ω) 10 X
1 X 1 R X 1 R
R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.30Ω Rated Current: 300mA RDC: 0.30Ω Rated Current: 300mA RDC: 0.30Ω Rated Current: 300mA
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
TYPICAL ELECTRICAL CHARACTERISTICS
Test Instruments : HP4291A Impedance / Material Analyzer
FCB0805-600HNT FCB0805-1000HNT FCB0805-1500HNT
1000 10000 10000
100 Z 1000 1000
IMPEDANCE (Ω) 10 X IMPEDANCE (Ω) 100 Z IMPEDANCE (Ω) 100 Z X
1 R 10 X 10
R
R
0.1 1 1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.40Ω Rated Current: 300mA RDC: 0.50Ω Rated Current: 200mA RDC: 0.60Ω Rated Current: 200mA
FCB1206-019HNT FCB1206-026HNT FCB1206-032HNT
100 100 100
IMPEDANCE (Ω) 10 1 Z X IMPEDANCE (Ω) 10 1 Z X IMPEDANCE (Ω) 10 1 Z X
R R R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.05Ω Rated Current: 600mA RDC: 0.05Ω Rated Current: 600mA RDC: 0.05Ω Rated Current: 600mA
FCB1206-050HNT FCB1206-060HNT FCB1206-120HNT
100 1000 1000
100 100
Z
IMPEDANCE (Ω) IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10 Z
10
1
1 X 1
R X
R X R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.10Ω Rated Current: 500mA RDC: 0.10Ω Rated Current: 500mAFF RDC: 0.15Ω Rated Current: 500mA
FCB1206-150HNT FCB1206-200HNT FCB1206-600HNT
1000 1000 1000
100 Z 100 100 Z
IMPEDANCE (Ω) 10 IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10 X
1 X 1 1
R R X R
0 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.15Ω Rated Current: 500mA RDC: 0.20Ω Rated Current: 400mA RDC: 0.30Ω Rated Current: 400mA
FCB1206-012HNT FCB1206-1200HNT FCB1206-2000HNT
10000 10000 10000
IMPEDANCE (Ω) 1000 Z IMPEDANCE (Ω) 1000 Z IMPEDANCE (Ω) 1000
100
100
100
Z
R X X R X R
10 10 10
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.40Ω Rated Current: 200mA RDC: 0.40Ω Rated Current: 200mA RDC: 0.60Ω Rated Current: 200mA
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
TYPICAL ELECTRICAL CHARACTERISTICS
Test Instruments : HP4291A Impedance / Material Analyzer
FCB0603-1000HNT FCB0603-1500HNT FCB0603-007HNT
10000
10000 100
1000 1000 Z 10
IMPEDANCE (Ω) 100 Z IMPEDANCE (Ω) 100 IMPEDANCE (Ω) Z X
10 R X 10 X 1
R
R
1 1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.70Ω Rated Current: 200mA RDC: 1.00Ω Rated Current: 50mA RDC: 0.10Ω Rated Current: 600mA
FCB0805-009HNT FCB0805-011HNT FCB0805-017HNT
100 100 100
IMPEDANCE (Ω) 10 Z X IMPEDANCE (Ω) 10 Z R X IMPEDANCE (Ω) 10 Z X
1
R 1 1
R
0 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.10Ω Rated Current: 600mA RDC: 0.10Ω Rated Current: 600mA RDC: 0.10Ω Rated Current: 600mA
FCB0805-032HNT FCB0805-060HNT FCB0805-070HNT
100 1000 1000
100 100
IMPEDANCE (Ω) X IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10 Z
Z
10
1
R
1 X 1 X
R
R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.10Ω Rated Current: 600mA RDC: 0.15Ω Rated Current: 500mA RDC: 0.15Ω Rated Current: 500mA
FCB0805-080HNT FCB0805-120HNT FCB0805-150HNT
1000 1000 1000
100 100 100 Z
IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10 Z IMPEDANCE (Ω) 10
1 1 X 1 X
X R
R
R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.15Ω Rated Current: 500mA RDC: 0.25Ω Rated Current: 300mA RDC: 0.25Ω Rated Current: 300mA
FCB0805-200HNT FCB0805-300HNT FCB0805-400HNT
1000 1000 1000
100 Z 100 Z 100 Z
IMPEDANCE (Ω) 10 IMPEDANCE (Ω) 10 IMPEDANCE (Ω) 10 X
1 X 1 R X 1 R
R
0.1 0.1 0.1
1 10 100 1000 10000 1 10 100 1000 10000 1 10 100 1000 10000
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
RDC: 0.30Ω Rated Current: 300mA RDC: 0.30Ω Rated Current: 300mA RDC: 0.30Ω Rated Current: 300mA
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
High-
HIGH CURRENT
FERRITE CHIP BEADS
T Y P E H C B
Return to
FEATURES Contents Page
• High impedance for volume.
• Excellent for suppressing noise at high frequencies, from several MHz to several hundreds of MHz.
• The chip bead type is best suited for preventing the abnormal oscillation of high frequency amplifying circuits.
• Nickel barrier provides excellent solder heat resistance both flow soldering and reflow soldering are applicable.
APPLICATIONS ORDERING INFORMATION
HCB0603 – 120 HNT F Pb Free
• Computers and peripherals. Packing
• TVS, VCRS. B: Bulk Pack
• Car — electronic equipment. Type T: Tape & Reel
• Tuners, etc. Impedance in
ohm@100MHz
Dimensions : mm
DIMENSIONS
Ferrite TYPE A B C D
Terminal Electrode HCB 0402 1.0 ± 0.15 1.50 ± 0.15 0.5 ± 0.15 0.25 ± 0.15
HCB 0608 1.6 ± 0.20 0.80 ± 0.15 0.8 ± 0.15 0.4 ± 0.2
D D
HCB 0805 2.0 ± 0.20 1.25 ± 0.20 0.9 ± 0.20 0.5 ± 0.3
C HCB 1206 3.2 ± 0.20 1.60 ± 0.20 1.1 ± 0.20 0.5 ± 0.3
HCB 1210 3.2 ± 0.20 2.50 ± 0.20 1.3 ± 0.20 0.5 ± 0.3
A B HCB 1806 4.5 ± 0.25 1.60 ± 0.20 1.6 ± 0.20 0.5 ± 0.3
HCB 1812 4.5 ± 0.25 3.20 ± 0.20 1.5 ± 0.20 0.5 ± 0.3
RECOMMENDED PATTERN Dimensions : mm
B TYPE A B C
HCB 0402 0.4 1.2 ~ 1.4 0.4
HCB 0603 0.8 2.4 ~ 3.4 0.6
HCB 0805 1.2 3.0 ~ 4.0 1.0
A
C HCB 1206 2.0 4.2 ~ 5.2 1.2
HCB 1210 2.0 5.5 ~ 6.5 1.8
HCB 1806 3.0 5.5 ~ 6.5 1.2
HCB 1812 3.0 5.5 ~ 6.5 2.4
Solder Land Inductor
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
HIGH CURRENT FERRITE CHIP BEADS — TYPE HCB
ELECTRICAL CHARACTERISTICS
Part Number Size Code Test Frequency Impedance DC Resistance Rated Current Quantity / Reel
(MHz) (Ω±25%) (Ω) max. (mA) max.
HCB0402-010HNT 0402 100 10 0.030 2000 10000
HCB0402-030HNT 0402 100 30 0.050 1700 10000
HCB0402-040HNT 0402 100 40 0.075 1500 10000
HCB0402-060HNT 0402 100 60 0.075 1500 10000
HCB0402-070HNT 0402 100 70 0.090 1200 10000
HCB0402-080HNT 0402 100 80 0.090 1200 10000
HCB0402-120HNT 0402 100 120 0.090 1200 10000
HCB0603-010HNT 0603 100 10 0.020 4000 4000
HCB0603-011HNT 0603 100 11 0.020 4000 4000
HCB0603-019HNT 0603 100 19 0.030 3000 4000
HCB0603-020HNT 0603 100 20 0.030 3000 4000
HCB0603-022HNT 0603 100 22 0.030 3000 4000
HCB0603-023HNT 0603 100 23 0.030 3000 4000
HCB0603-025HNT 0603 100 25 0.030 3000 4000
HCB0603-030HNT 0603 100 30 0.030 3000 4000
HCB0603-031HNT 0603 100 31 0.035 3000 4000
HCB0603-040HNT 0603 100 40 0.035 3000 4000
HCB0603-047HNT 0603 100 47 0.040 3000 4000
HCB0603-050HNT 0603 100 50 0.040 3000 4000
HCB0603-056HNT 0603 100 56 0.040 3000 4000
HCB0603-060HNT 0603 100 60 0.040 3000 4000
HCB0603-068HNT 0603 100 68 0.050 2500 4000
HCB0603-070HNT 0603 100 70 0.050 2500 4000
HCB0603-075HNT 0603 100 75 0.050 2500 4000
HCB0603-080HNT 0603 100 80 0.050 2500 4000
HCB0603-090HNT 0603 100 90 0.050 2500 4000
HCB0603-100HNT 0603 100 100 0.050 2500 4000
HCB0603-120HNT 0603 100 120 0.080 2500 4000
HCB0603-150HNT 0603 100 150 0.085 2000 4000
HCB0603-180HNT 0603 100 180 0.090 2000 4000
HCB0603-200HNT 0603 100 200 0.095 2000 4000
HCB0603-220HNT 0603 100 220 0.100 2000 4000
HCB0603-240HNT 0603 100 240 0.120 1500 4000
HCB0603-300HNT 0603 100 300 0.120 1500 4000
HCB0603-330HNT 0603 100 330 0.120 1500 4000
HCB0603-400HNT 0603 100 400 0.120 1500 4000
HCB0603-470HNT 0603 100 470 0.150 1500 4000
HCB0603-500HNT 0603 100 500 0.150 1500 4000
HCB0603-600HNT 0603 100 600 0.200 1000 4000
HCB0603-750HNT 0603 100 750 0.250 800 4000
HCB0603-1000HNT 0603 100 1000 0.250 800 4000
HCB0603-1500HNT 0603 100 1500 0.400 500 4000
HCB0805-007HNT 0805 100 7 0.010 6000 4000
HCB0805-011HNT 0805 100 11 0.010 6000 4000
HCB0805-013HNT 0805 100 13 0.020 5000 4000
HCB0805-015HNT 0805 100 15 0.020 5000 4000
HCB0805-017HNT 0805 100 17 0.020 5000 4000
/www
http:/
.smec-inc
.com
sales@smec-inc
.com • e-mail:
eb Site:
ele
T
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
W
ax (512) 249-0054 •
phone (512) 249-0017 • F
HIGH CURRENT FERRITE CHIP BEADS — TYPE HCB
ELECTRICAL CHARACTERISTICS
Part Number Size Code Test Frequency Impedance DC Resistance Rated Current Quantity / Reel
(MHz) (Ω±25%) (Ω) max. (mA) max.
HCB0805-019HNT 0805 100 19 0.020 4000 4000
HCB0805-022HNT 0805 100 22 0.020 4000 4000
HCB0805-026HNT 0805 100 26 0.020 4000 4000
HCB0805-028HNT 0805 100 28 0.020 4000 4000
HCB0805-030HNT 0805 100 30 0.020 4000 4000
HCB0805-031HNT 0805 100 31 0.020 4000 4000
HCB0805-032HNT 0805 100 32 0.020 4000 4000
HCB0805-039HNT 0805 100 39 0.020 3000 4000
HCB0805-040HNT 0805 100 40 0.020 3000 4000
HCB0805-042HNT 0805 100 42 0.025 3000 4000
HCB0805-050HNT 0805 100 50 0.025 3000 4000
HCB0805-060HNT 0805 100 60 0.030 3000 4000
HCB0805-070HNT 0805 100 70 0.040 3000 4000
HCB0805-075HNT 0805 100 75 0.040 3000 4000
HCB0805-080HNT 0805 100 80 0.040 3000 4000
HCB0805-090HNT 0805 100 90 0.040 3000 4000
HCB0805-100HNT 0805 100 100 0.040 3000 4000
HCB0805-120HNT 0805 100 120 0.040 3000 4000
HCB0805-130HNT 0805 100 130 0.050 2500 4000
HCB0805-150HNT 0805 100 150 0.050 2500 4000
HCB0805-180HNT 0805 100 180 0.050 2500 4000
HCB0805-200HNT 0805 100 200 0.050 2500 4000
HCB0805-220HNT 0805 100 220 0.080 2000 4000
HCB0805-250HNT 0805 100 250 0.080 2000 4000
HCB0805-300HNT 0805 100 300 0.080 2000 4000
HCB0805-330HNT 0805 100 330 0.080 2000 4000
HCB0805-400HNT 0805 100 400 0.100 2000 4000
HCB0805-450HNT 0805 100 450 0.100 2000 4000
HCB0805-470HNT 0805 100 470 0.100 2000 4000
HCB0805-500HNT 0805 100 500 0.100 2000 4000
HCB0805-600HNT 0805 100 600 0.100 2000 4000
HCB0805-750HNT 0805 100 750 0.120 1500 4000
HCB0805-1000HNT 0805 100 1000 0.120 1500 4000
HCB0805-1500HNT 0805 100 1500 0.300 1000 4000
HCB1206-008HNT 1206 100 8 0.015 6000 3000
HCB1206-011HNT 1206 100 11 0.015 6000 3000
HCB1206-019HNT 1206 100 19 0.015 6000 3000
HCB1206-026HNT 1206 100 26 0.015 6000 3000
HCB1206-030HNT 1206 100 30 0.015 4000 3000
HCB1206-031HNT 1206 100 31 0.015 4000 3000
HCB1206-032HNT 1206 100 32 0.015 4000 3000
HCB1206-035HNT 1206 100 35 0.015 4000 3000
HCB1206-040HNT 1206 100 40 0.015 4000 3000
HCB1206-042HNT 1206 100 42 0.015 4000 3000
HCB1206-050HNT 1206 100 50 0.020 4000 3000
HCB1206-060HNT 1206 100 60 0.020 4000 3000
HCB1206-068HNT 1206 100 68 0.020 4000 3000
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
HIGH CURRENT FERRITE CHIP BEADS — TYPE HCB
ELECTRICAL CHARACTERISTICS
Part Number Size Code Test Frequency Impedance DC Resistance Rated Current Quantity / Reel
(MHz) (Ω±25%) (Ω) max. (mA) max.
HCB1206-070HNT 1206 100 70 0.020 4000 3000
HCB1206-080HNT 1206 100 80 0.025 3000 3000
HCB1206-090HNT 1206 100 90 0.030 3000 3000
HCB1206-100HNT 1206 100 100 0.030 2500 3000
HCB1206-120HNT 1206 100 120 0.030 2500 3000
HCB1206-150HNT 1206 100 150 0.040 2000 3000
HCB1206-200HNT 1206 100 200 0.050 2000 3000
HCB1206-220HNT 1206 100 220 0.050 2000 3000
HCB1206-300HNT 1206 100 300 0.060 2000 3000
HCB1206-400HNT 1206 100 400 0.100 2000 3000
HCB1206-500HNT 1206 100 500 0.100 2000 3000
HCB1206-600HNT 1206 100 600 0.100 2000 3000
HCB1206-1000HNT 1206 50 1000 0.150 1200 3000
HCB1206-1200HNT 1206 50 1200 0.180 1000 3000
HCB1206-1500HNT 1206 50 1500 0.200 800 3000
HCB1210-019HNT 1210 100 19 0.025 4000 2500
HCB1210-032HNT 1210 100 32 0.025 4000 2500
HCB1210-060HNT 1210 100 60 0.025 4000 2500
HCB1210-090HNT 1210 100 90 0.025 3000 2500
HCB1806-019HNT 1806 100 19 0.020 6000 2000
HCB1806-040HNT 1806 100 40 0.020 6000 2000
HCB1806-050HNT 1806 100 50 0.020 6000 2000
HCB1806-060HNT 1806 100 60 0.020 5000 2000
HCB1806-070HNT 1806 100 70 0.025 5000 2000
HCB1806-075HNT 1806 100 75 0.025 5000 2000
HCB1806-080HNT 1806 100 80 0.025 4000 2000
HCB1806-100HNT 1806 100 100 0.100 2000 2000
HCB1806-150HNT 1806 100 150 0.100 2000 2000
HCB1806-190HNT 1806 100 190 0.100 2000 2000
HCB1806-300HNT 1806 100 300 0.100 2000 2000
HCB1806-600HNT 1806 100 600 0.100 2000 2000
HCB1806-1000HNT 1806 100 1000 0.100 2000 2000
HCB1806-1300HNT 1806 100 1300 0.100 2000 2000
HCB1812-019HNT 1812 100 19 0.030 6000 1000
HCB1812-030HNT 1812 100 30 0.030 6000 1000
HCB1812-047HNT 1812 100 47 0.030 6000 1000
HCB1812-050HNT 1812 100 50 0.030 6000 1000
HCB1812-070HNT 1812 100 70 0.030 6000 1000
HCB1812-080HNT 1812 100 80 0.030 4000 1000
HCB1812-090HNT 1812 100 90 0.030 4000 1000
HCB1812-120HNT 1812 100 120 0.030 4000 1000
HCB1812-150HNT 1812 100 150 0.030 4000 1000
HCB1812-190HNT 1812 100 190 0.030 4000 1000
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
HIGH FREQUENCY
MULTILAYER
CHIP INDUCTORS
T Y P E H K
FEATURES APPLICATIONS
Portable Telephones, PHS and W-LAN
Multilayer inductor made of advanced ceramics with low-resistivity silver used as Miscellaneous high-frequency circuits.
internal conductors provides excellent Q and SRF characteristics.
Designed to address surface mount inductor needs for applications above EMI countermeasure in high-frequency circuits
100MHz.
Multilayer block structure ensures outstanding reliability, high productivity and
product quality.
DIMENSIONS Unit : mm (Inch)
Type L W T EB
HK0603 0.6±0.03 0.30±0.03 0.30±0.03 0.15±0.05
(0201) (0.024±0.001) (0.012±0.001) (0.012±0.001) (0.006±0.002)
HK1005 1.00±0.05 0.50±0.05 0.50±0.05 0.25±0.10
(0402) (0.039±0.002) (0.020±0.002) (0.020±0.002) (0.010±0.004)
1.6±0.15 0.80±0.15 0.80±0.15 0.30±0.2
HK1608
(0603) (0.063±0.006) (0.031±0.006) (0.031±0.006) (0.012±0.008)
+0.3 0.85±0.2 0.5±0.3
2.0 -0.1 1.25±0.2 +0.2
1.0 -0.3
HK2125 +0.012 ) (0.049±0.008) (0.033±0.008) (0.020±0.012)
(0805) (0.079 -0.004 ) +0.008
(0.039 -0.012)
ORDERING INFORMATION SPECIFICATIONS
0603 : -55 to +125°C
HK 1005 10N J T F Operating 1005 : -55 to +125°C
Temperature 1608 : -40 to +85°C
2125 : -40 to +85°C
Type
Size
0603 (0201)
1005 (0402) Inductance TAPE AND REEL PACKING
1608 (0603) 3N3=3.3nH Tolerance 0603 -- 15000 Pcs/Reel
2125 (0805) 10N=10nH S= ± 0.3nH Tape & Reel 1005 -- 10000 Pcs/Reel
R10=100nH J= ± 5% Lead Free 1608 -- 4000 Pcs/Reel
R39=390nH K= ± 10% RoHs 2125 -- 4000 / 3000 Pcs/Reel **
** Changes depends on the inductance values.
** Please contact us for specific reel quantity.
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
HIGH FREQUENCY MULTILAYER CHIP INDUCTORS — TYPE HK
HK0603 ELECTRICAL SPECIFICATIONS
Rated Current
LQ Self-resonant
Q (Typical) Frequency [MHz] DC. Resistance (Ω) [mA]
Q Measuring Frequency [MHz] Thickness [mm]
Ordering Code Inductance (nH) max.
min. Frequency (inch)
[Mhz] 100 300 500 800 1000 min. Typ. max. Typ. -55 ~ +125°C
HK0603 1N0S 1.0±0.3nH 4 100 6 12 17 22 27 10000 >13000 0.14 0.088 250
HK0603 1N2S 1.2±0.3nH 4 100 6 12 16 21 25 10000 >13000 0.14 0.089 250
HK0603 1N5S 1.5±0.3nH 4 100 6 12 15 20 23 10000 >13000 0.18 0.11 230
HK0603 1N8S 1.8±0.3nH 4 100 6 12 15 20 23 10000 >13000 0.19 0.12 200
HK0603 2N0S 2.0±0.3nH 4 100 6 12 15 20 22 10000 >13000 0.20 0.13 200
HK0603 2N2S 2.2±0.3nH 4 100 6 12 15 20 22 8800 12500 0.22 0.14 200
HK0603 2N4S 2.4±0.3nH 4 100 6 12 15 20 22 8300 11700 0.24 0.15 200
HK0603 2N7S 2.7±0.3nH 5 100 7 12 15 20 22 7700 11000 0.25 0.16 200
HK0603 3N0S 3.0±0.3nH 5 100 7 12 15 20 22 7200 11000 0.28 0.18 180
HK0603 3N3 3.3±10% or 0.3nH 5 100 7 12 15 20 22 6700 9600 0.30 0.19 180
HK0603 3N6 3.6±10% or 0.3nH 5 100 7 12 15 20 22 6400 9100 0.30 0.20 170
HK0603 3N9 3.9±10% or 0.3nH 5 100 7 12 15 20 22 6000 8600 0.30 0.20 170
HK0603 4N3 4.3±10% or 0.3nH 5 100 7 12 15 19 21 5700 8100 0.40 0.22 150
HK0603 4N7 4.7±10% or 0.3nH 5 100 7 12 15 19 21 5300 7600 0.40 0.24 150
HK0603 5N1 5.1±10% or 0.3nH 5 100 7 12 15 19 21 5000 7100 0.40 0.26 150
HK0603 5N6 5.6±10% or 0.3nH 5 100 7 12 15 19 21 4600 6600 0.40 0.27 150
HK0603 6N2 6.2±10% or 0.3nH 5 100 7 11 14 18 20 4200 6100 0.44 0.29 150 0.30±0.03
HK0603 6N8 6.8±10% or ±5% 5 100 7 11 14 18 20 3900 5600 0.48 0.30 150 (0.012±0.001)
HK0603 7N5 7.5±10% or ±5% 5 100 7 11 14 18 19 3600 5300 0.53 0.34 150
HK0603 8N2 8.2±10% or ±5% 5 100 7 11 14 18 19 3400 4900 0.55 0.34 150
HK0603 9N1 9.1±10% or ±5% 5 100 7 11 14 17 18 3200 4600 0.62 0.40 150
HK0603 10N 10.0±10% or ±5% 5 100 7 11 14 17 18 2900 4200 0.63 0.41 150
HK0603 12N 12.0±10% or ±5% 5 100 7 11 14 17 18 2700 3800 0.70 0.45 100
HK0603 15N 15.0±10% or ±5% 5 100 7 11 13 16 17 2300 3300 0.80 0.50 100
HK0603 18N 18.0±10% or ±5% 5 100 7 11 13 16 17 2100 3000 0.90 0.57 100
HK0603 22N 22.0±10% or ±5% 5 100 7 11 13 15 16 1800 2600 1.20 0.71 100
HK0603 27N 27.0±10% or ±5% 4 100 6 10 12 14 15 1800 2600 1.80 1.11 50
HK0603 33N 33.0±10% or ±5% 4 100 6 10 12 14 14 1700 2400 2.10 1.33 50
HK0603 39N 39.0±10% or ±5% 4 100 6 10 12 13 12 1500 2100 2.40 1.51 50
HK0603 47N 47.0±10% or ±5% 4 100 6 10 11 12 11 1300 1800 2.80 1.74 50
HK0603 56N 56.0±10% or ±5% 4 100 6 10 11 11 10 1100 1600 3.00 1.85 50
HK0603 68N 68.0±10% or ±5% 4 100 6 10 11 11 10 1100 1500 3.00 2.30 50
HK0603 82N 82.0±10% or ±5% 4 100 6 10 11 10 8 1000 1400 3.50 2.60 50
HK0603 R10 100.0±10% or ±5% 4 100 6 9 10 9 6 900 1200 4.00 3.00 40
Please specify the inductance tolerance code.
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
HIGH FREQUENCY MULTILAYER CHIP INDUCTORS — TYPE HK
HK1005 ELECTRICAL SPECIFICATIONS
Rated Current Rated Current
LQ Self-resonant
Q (Typical) Frequency [MHz] DC. Resistance (Ω) [mA] [mA]
Q Measuring Frequency [MHz] Thickness [mm]
Ordering Code Inductance (nH) max. max.
min. Frequency (inch)
[Mhz] 100 300 500 800 1000 min. Typ. max. Typ. -55 ~ +125°C -55 ~ +85°C
HK1005 1N0S 1.0±0.3nH 8 100 11 25 34 43 52 10000 >13000 0.08 0.04 300 900
HK1005 1N2S 1.2±0.3nH 8 100 11 25 35 44 52 10000 >13000 0.09 0.04 300 900
HK1005 1N5S 1.5±0.3nH 8 100 11 24 33 44 48 6000 >13000 0.10 0.05 300 850
HK1005 1N8S 1.8±0.3nH 8 100 11 23 30 36 42 6000 11000 0.12 0.06 300 700
HK1005 2N0S 2.0±0.3nH 8 100 11 21 27 34 39 6000 10500 0.12 0.06 300 700
HK1005 2N2S 2.2±0.3nH 8 100 10 18 25 31 36 6000 10000 0.13 0.07 300 700
HK1005 2N4S 2.4±0.3nH 8 100 10 18 24 31 35 6000 9500 0.13 0.07 300 650
HK1005 2N7S 2.7±0.3nH 8 100 10 18 24 31 34 6000 9000 0.13 0.08 300 650
HK1005 3N0S 3.0±0.3nH 8 100 10 18 24 31 35 6000 8500 0.16 0.09 300 600
HK1005 3N3 3.3±10% or 0.3nH 8 100 10 18 24 31 35 6000 8000 0.16 0.10 300 550
HK1005 3N6 3.6±10% or 0.3nH 8 100 10 18 24 31 35 5000 7500 0.20 0.11 300 500
HK1005 3N9 3.9±10% or 0.3nH 8 100 10 18 24 31 35 4000 7000 0.21 0.12 300 500
HK1005 4N3 4.3±10% or 0.3nH 8 100 10 18 24 31 35 4000 6500 0.20 0.12 300 500
HK1005 4N7 4.7±10% or 0.3nH 8 100 10 18 24 31 34 4000 6000 0.21 0.12 300 500
HK1005 5N1 5.1±10% or 0.3nH 8 100 10 18 24 31 34 4000 5800 0.21 0.13 300 450
HK1005 5N6 5.6±10% or 0.3nH 8 100 10 18 24 30 35 4000 5700 0.23 0.15 300 430
HK1005 6N2 6.2±10% or 0.3nH 8 100 10 18 24 30 34 3900 5600 0.25 0.16 300 430
HK1005 6N8 6.8±10% or ±5% 8 100 10 18 23 29 32 3900 5500 0.25 0.17 300 430
HK1005 7N5 7.5±10% or ±5% 8 100 10 18 23 29 32 3700 5200 0.25 0.18 300 400 0.50±0.05
HK1005 8N2 8.2±10% or ±5% 8 100 10 18 23 29 31 3600 4900 0.28 0.21 300 380
(0.020±0.002)
HK1005 9N1 9.1±10% or ±5% 8 100 10 18 23 29 31 3400 4500 0.30 0.22 300 360
HK1005 10N 10.0±10% or ±5% 8 100 10 18 23 29 31 3200 4300 0.31 0.23 300 340
HK1005 12N 12.0±10% or ±5% 8 100 11 18 23 29 31 2700 3900 0.40 0.28 300 330
HK1005 15N 15.0±10% or ±5% 8 100 11 18 23 28 30 2300 3500 0.46 0.31 300 320
HK1005 18N 18.0±10% or ±5% 8 100 11 18 23 28 30 2100 3100 0.55 0.35 300 310
HK1005 22N 22.0±10% or ±5% 8 100 11 17 22 26 27 1900 2800 0.60 0.42 300 300
HK1005 27N 27.0±10% or ±5% 8 100 11 17 21 25 26 1600 2300 0.70 0.47 300 300
HK1005 33N 33.0±10% or ±5% 8 100 11 16 20 23 22 1300 1900 0.80 0.50 200 250
HK1005 39N 39.0±10% or ±5% 8 100 11 16 20 23 21 1200 1700 0.90 0.52 200 250
HK1005 47N 47.0±10% or ±5% 8 100 11 16 19 21 18 1000 1500 1.00 0.58 200 230
HK1005 56N 56.0±10% or ±5% 8 100 11 16 18 18 16 750 1300 1.00 0.61 200 220
HK1005 68N 68.0±10% or ±5% 8 100 11 15 17 18 11 750 1200 1.20 0.70 180 200
HK1005 82N 82.0±10% or ±5% 8 100 10 14 16 15 6 600 1100 1.30 0.81 150 200
HK1005 R10 100.0±10% or ±5% 8 100 10 14 14 12 -- 600 1000 1.50 0.94 150 200
HK1005 R12 120.0±10% or ±5% 8 100 10 12 10 -- -- 600 800 1.60 1.10 150 200
HK1005 R15 150.0±10% or ±5% 8 100 12 17 17 -- -- 550 920 3.20 2.57 140 200
HK1005 R18 180.0±10% or ±5% 8 100 12 16 -- -- -- 500 810 3.70 2.97 130 200
HK1005 R22 220.0±10% or ±5% 8 100 12 16 -- -- -- 450 700 4.20 3.29 120 200
HK1005 R27 270.0±10% or ±5% 8 100 12 14 -- -- -- 400 600 4.80 3.92 110 200
Please specify the inductance tolerance code.
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
HIGH FREQUENCY MULTILAYER CHIP INDUCTORS — TYPE HK
HK1608 ELECTRICAL SPECIFICATIONS
LQ Self-resonant Frequency Rated
Q (Typical) Frequency [MHz] DC. Resistance (Ω)
Measuring [MHz] Current Thickness [mm]
Ordering Code Inductance (nH) Q min.
Frequency [mA] (inch)
100 300 500 800 1000 min. Typ. max. Typ.
[Mhz] max.
HK1608 1N0S 1.0±0.3nH 8 100 14 30 40 70 90 10000 >13000 0.05 0.015 300
HK1608 1N2S 1.2±0.3nH 8 100 14 30 40 70 90 10000 >13000 0.05 0.015 300
HK1608 1N5S 1.5±0.3nH 8 100 14 26 34 47 50 6000 >13000 0.10 0.030 300
HK1608 1N8S 1.8±0.3nH 8 100 10 18 24 30 34 6000 >13000 0.10 0.060 300
HK1608 2N2S 2.2±0.3nH 8 100 12 22 29 37 40 6000 12000 0.10 0.060 300
HK1608 2N7S 2.7±0.3nH 10 100 13 24 32 41 45 6000 11000 0.10 0.060 300
HK1608 3N3 3.3±10% or 0.3nH 10 100 14 25 33 42 47 6000 9000 0.12 0.060 300
HK1608 3N9 3.9±10% or 0.3nH 10 100 13 25 33 42 46 6000 8000 0.14 0.070 300
HK1608 4N7 4.7±10% or 0.3nH 10 100 13 25 33 42 47 4000 6500 0.16 0.080 300
HK1608 5N6 5.6±10% or 0.3nH 10 100 14 25 33 42 46 4000 5800 0.18 0.090 300
HK1608 6N8 6.8±10% or ±5% 10 100 14 25 33 43 47 4000 5600 0.22 0.110 300
HK1608 8N2 8.2±10% or ±5% 10 100 14 26 34 44 48 3500 5200 0.24 0.130 300
HK1608 10N 10±10% or ±5% 12 100 14 26 34 43 47 3400 4600 0.26 0.160 300
HK1608 12N 12±10% or ±5% 12 100 14 27 35 45 49 2600 4000 0.28 0.170 300
HK1608 15N 15±10% or ±5% 12 100 15 28 37 46 51 2300 3400 0.32 0.200 300
HK1608 18N 18±10% or ±5% 12 100 15 27 36 44 48 2000 3000 0.35 0.210 300 0.8±0.15
HK1608 22N 22±10% or ±5% 12 100 16 28 36 44 47 1600 2900 0.40 0.250 300 (0.031±0.006)
HK1608 27N 27±10% or ±5% 12 100 16 29 37 45 46 1400 2200 0.45 0.280 300
HK1608 33N 33±10% or ±5% 12 100 17 31 40 46 47 1200 1800 0.55 0.350 300
HK1608 39N 39±10% or ±5% 12 100 18 31 39 44 44 1100 1600 0.60 0.380 300
HK1608 47N 47±10% or ±5% 12 100 17 28 34 35 34 900 1600 0.70 0.450 300
HK1608 56N 56±10% or ±5% 12 100 17 28 34 34 31 900 1400 0.75 0.500 300
HK1608 68N 68±10% or ±5% 12 100 18 29 34 30 22 700 1200 0.85 0.550 300
HK1608 82N 82±10% or ±5% 12 100 18 28 33 27 -- 600 1100 0.95 0.600 300
HK1608 R10 100±10% or ±5% 12 100 18 27 28 16 -- 600 1000 1.00 0.650 300
HK1608 R12 120±10% or ±5% 8 50 16 24 23 -- -- 500 800 1.20 0.680 300
HK1608 R15 150±10% or ±5% 8 50 13 19 16 -- -- 500 800 1.20 0.730 300
HK1608 R18 180±10% or ±5% 8 50 13 18 12 -- -- 400 700 1.30 0.850 300
HK1608 R22 220±10% or ±5% 8 50 12 16 -- -- -- 400 600 1.50 0.950 300
HK1608 R27 270±10% or ±5% 8 50 14 15 -- -- -- 400 550 1.90 1.340 150
HK1608 R33 330±10% or ±5% 8 50 14 -- -- -- -- 350 480 2.10 1.530 150
HK1608 R39 390±10% or ±5% 8 50 13 -- -- -- -- 350 410 2.30 1.720 150
HK1608 R47 470±10% or ±5% 8 50 13 -- -- -- -- 350 360 2.60 2.040 150
Please specify the inductance tolerance code.
Telephone (512) 249-0017 • Fax (512) 249-0054 • Web Site: http://www.smec-inc.com • e-mail: [email protected]
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Discover the best professional documents and content resources in AnyFlip Document Base.
Search