Connecting Pegs 3D Lite Board® Power Button Peg oles

Connecting Pegs 3D Lite Board® GENERAL COLOSSUS: As impressive
Power Button as his mythical namesake, the giant
Peg Holes bronze Colossus of Rhodes statue
3 light settings. is one of the Seven Wonders of the
Press power button to World.
change light setting.
GENERAL COLOSSUS
3330 Please read this manual before you begin! Failure To construct with Laser Pegs®, slide two pieces together to form a
to follow this manual’s instructions may result in connection. Slide each piece on and off smoothly. The 90° pegs are MDioffdiceullty
For Boys And Girls damage to the 3D Lite Board®, AC Adapter and/ essential to construction but they DO NOT ILLUMINATE. Level
Ages 5 And Up or Laser Pegs®. Not adhering to these directions
will void the manufacturer’s warranty. Connect Laser Pegs® to the 3D Lite Board® A
57 Models+ Packing has to be kept since it contains
important information. STEP
Any creation you can build
CHOKWINAGRHNAIZNAGRD: -Small parts. 1
LIGHTED
Not for children under 3 yrs. STEP
CONSTRUCTION SET INCLUDES: Do not submerge in water.
2
• 34 Laser Pegs® Construction Compatible AC Adapter Battery Compartment
• 212 Construction parts Compatible with other construction kits STEP
• 3D Lite Board® INPUT is on the side of the Requires (3AA) Batteries
• Instruction Manual EN71, RoHS COMPLIANT 3D Lite Board®. 3

Requires 3 AA Batteries This product complies to Peg Holes Peg Holes Hinge
all safety requirements
Batteries NOT Pull outward
Included of ASTM F 963 to open.

MODEL INSTRUCTIONS Press button to turn on/off *AC Adapter
sold seperatley.
All additional model instructions can Push button to cycle through 3 different light settings.
be downloaded at www.LaserPegs.com
OFF/ON/FLASH/FLASH FASTER
x2 Laser Pegs® Parts List
Power Button
There is No LED In The 90 Degree Peg
Connecting an AC Adapter

Plug AC Adapter plug into the side of the 3D Lite Board®.

AC Adapter
Connection

x2 x2 x2 x2 x5 x7

Y PEG Stackable

x8 x2

45° PEG SQUARE STRAIGHT STRAIGHT WHEEL PEG Remove all batteries from Laser Pegs® NEVER place AC Adapter Use Phillips
M-M PEG T-PEG 3D Lite Board® Power Base before using Plug into top Peg Holes head screw-
5 volt AC adapter. Never connect more than 200
TRUSS PEG STRAIGHT x2 *To avoid short-circuits, keep metal objects Laser Pegs® when using a 5 volt Tote Box
M-M PEG and other unauthorized materials from (2000mA) AC Adapter.
SQUARE obstructing the peg holes. Designed for storage
PEG of Laser Pegs® parts.

Color Each Laser Peg® is color coded on the circuit board inside
Code each shape. There is No LED In The 90 Degree Peg.

The AC Adapter and the Power Base are to be regularly examined for damage
to the cord, plug, enclosure and other parts, and in the event of such damage,
they must not be used until the damage has been repaired.

Laser Pegs® Stackable ® Battery
x4 Compartment
Laser Pegs® link that x2
allows you to connect to
other construction kits. x4

x2 Construction Parts List x2
x4 x10
x12 x8 Batteries NOT Place batteries in
x30 Included the correct position.
x10 x6
Battery Compartment
x16 x2
x8 Requires (3AA) Batteries
x10
x6
x16 x4 When Using Batteries WARNING! Each Laser Peg® draws current from the batteries. Therefore,
x12 the more pegs you use, the quicker you will deplete your battery power!
1. Remove screws. As the power weakens, the current will slowly fail and some Laser Pegs®
x4 x8 2. Place three AA batteries in the correct position - as displayed inside the will illuminate (typically the reds and yellows) and some won’t. When the
Laser Pegs® dim the Laser Pegs® are not broken, they just need stronger
x16 3D Lite Board®. batteries or an AC Adapter.
3. Push RED button to turn on! You have 3 simple options...
x6 x6 4. Do not mix old and new batteries. 1. Use a 5 volt AC Adapter –available from www.LaserPegs.com
x4 5. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel- 2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will
www.LaserPegs.com cadmium)batteries!
6. Exhausted batteries are to be removed from the power base. still deplete rapidly the more laser pegs you connect!
This manual is copyright and cannot be reproduced or used online without Laser 7. Never connect more than 200 Laser Pegs®
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent 8. Non-rechargeable batteries are not to be recharged.
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures 9. Rechargeable batteries are only to be charged under adult supervision.
LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: [email protected] 10. Rechargeable batteries are to be removed from the toy before being

charged.
11. Batteries are to be inserted with the correct polarity.
12. The supply terminals are not to be short-circuited.

4 8STEP STEP STEP

STEP 16

11

STEP STEP

5 17
STEP
12 STEP

STEP 18

9

STEP

13

STEP

6

STEP

14

B STEP

STEP C 19

7

STEP

10

STEP

15

www.LaserPegs.com

Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558

D STEP E

STEP 25 STEP

20 26
COMBINE
STEP
C
21

STEP

22

STEP

23

STEP

24

STEP STEP

27 29
COMBINE
D

STEP

28

www.LaserPegs.com

Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558

STEP STEP

30 32
COMBINE
COMBINE
A
B
STEP

31

STEP ATTACH MODEL TO

33

3-D LITEBOARD

STEP

34

www.LaserPegs.com

Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558