Circle K Manual

HUSKY PRODUCT
MANUAL



Circle K Spec Sheet ®

Unleaded 3/4” NPT Product CIRCLE K SPECIFICATIONS

MODEL NO. DESCRIPTION

159559 Pressure Activated Automatic Nozzle- 3/4’’ (19 mm) Inlet, NPTF, Unleaded with Three Notch Hold Open Clip and Waffle Splash Guard, UL Black

000350 Swivel- NPTF with ¾’’ M x ¾’’ F (19 mm M x 19 mm F) Multi-Plane Swivel, UL

CP10WB09L Hose- 3/4” NPTM Aluminum Ferrule/Zinc Stem Permanent Couplings, with 5/8 “ x 9’ Wirebraid Black Hose, UL

008330 Reconnectable MagBreak with ¾’’ F x ¾’’ F (19 mm F x 19 mm F)

CP10WB.75L Whip Hose- 3/4” NPTM Aluminum Ferrule/Zinc Stem Permanent Couplings, with 5/8 “ x 9” Wirebraid Black Hose, UL

L igh t D uty Diesel 3/4” NPT Product

MODEL NO. DESCRIPTION

159561 Pressure Activated Automatic Nozzle- 3/4’’ (19 mm) Inlet, NPTF, LDD with Three Notch Hold Open Clip, Full Grip Guard, Waffle Splash Guard, UL Green

000350 Swivel- NPTF with ¾’’ M x ¾;’’ F (19 mm M x 19 mm F) Multi-Plane Swivel, UL

CP10WB09L Hose- 3/4” NPTM Aluminum Ferrule/Zinc Stem Permanent Couplings, with 5/8 “ x 9’ Wirebraid Black Hose, UL

008330 Reconnectable MagBreak with ¾’’ F x ¾’’ F (19 mm F x 19 mm F)

CP10WB.75L Whip Hose- 3/4” NPTM Aluminum Ferrule/Zinc Stem Permanent Couplings, with 5/8 “ x 9” Wirebraid Black Hose, UL

1” H igh -flow NPT Product

MODEL NO. DESCRIPTION

177610 Pressure Activated Automatic Nozzle-1’’(25.4mm) Inlet, NPTF, Heavy Duty Diesel with Three Notch Hold Open Clip, Polymer Hand Guard, Spout Bushing, Full
Grip Guard, Waffle Splash Guard, UL Green

000087 Swivel- High-Flow / High-Volume Truck, BSPP/NPFT with 1’’ M x 1’’ F (25.4 mm M x 25.4 mm F) High-Flow Multi-Plane Swivel

CP16WB09L Hose- 1” NPTM Aluminum Ferrule/Zinc Stem Permanent Couplings, with 1” x 9’ Wirebraid Black Hose, UL

008331 Reconnectable MagBreak with 1’’ F x 1’’ F (25.4 mm F x 25.4 mm F

CP16WB.75L Whip Hose- 1” NPTM Aluminum Ferrule/Zinc Stem Permanent Couplings, with 1” x 9” Wirebraid Black Hose, UL

3/4” BS PP DEF Product

MODEL NO. DESCRIPTION

1215091N DEF with Three Notch Hold Open Clip, Spout Ring, magnetic Accufuel Spout, and Magnetic Hand Guard Non U/L Blue, Glibarco

12964154N DEF with Three Notch Hold Open Clip, Spout Ring, magnetic Accufuel Spout, and Magnetic Hand Guard Non U/L Blue, Wayne

012828 DEF Inline Combo, BSP ¾’’ M (19 mm M) Swivel X / ¾’’ F (19 mm F) with Scuff Guard

P/V Vent Caps

MODEL NO. DESCRIPTION
005885 Pressure / Vacuum Vents, NPTF 2’’ (50.8 mm) Thread-on EVR Vent with Internal Screen - 3’’ WCP and 8’’ WCV CARB approved
004885 Pressure / Vacuum Vents, NPTF 2’’ (50.8 mm) Thread-on Vent - 3’’ WCP and 8’’ WCV

Specialty Items

MODEL NO. DESCRIPTION

011154 Unleaded EZ Connect Kit (EC,159559,350,8330,10WB09L)

011463 Light Duty Diesel EZ Connect Kit (EC,159561,350,8330,10WB09L)

010934 High Flow EZ Connect Kit (EC,177610,0087,8331,16HW09)

CP10LP09 Hose- 5/8” x 09’ Low Perm

CP10LP.75 Whip Hose- 5/8” x 9” Low Perm

1190404 Unleaded XS EZ Lever Eco Nozzle with Clip, UL

11086179 Unleaded XS E25 Nozzle, UL

006360 E25 Reconnectable Safe-T-Break

659504 Unleaded XS E85 Nozzle, UL

006273 E25/E85 Safe-T-Break ¾F X ¾F

006350 E85 3/4” Multi-Plane Swivel

E1163504 Unleaded XS EZ Lever, UL

E1163503 Light Duty Diesel XS EZ Lever, UL

CP10HW09L Hose- 5/8” x 09’ Hardwall

CP10HW.75L Hose- 5/8” x 9” Hardwall

004860 Swivel- 1’’ High Flow

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

TABLE OF CONTENTS

3/4” NPT Hanging Hardware..................................................................................................................1-7
1” NPT Hanging Hardware....................................................................................................................8-14
3/4” BSP Hanging Hardware...............................................................................................................15-18
P/V Vent Caps.......................................................................................................................................19-21
EZ Connect Kits....................................................................................................................................22-23
Low Perm Hose.....................................................................................................................................24-25
Enhanced Conventional (ECO) Nozzles............................................................................................26-28
Alternative Fuels Hanging Haqrdware............................................................................................29-34
Premium Hanging Hardware..............................................................................................................35-40
Hanging Hardware Testing & Maintenance....................................................................................41-43
Installation Sheets..............................................................................................................................44-103
Product Appendix: Diagrams & Enhancements.........................................................................104-113
Warranty Information......................................................................................................................114-117
Businss Unit Deviation Numbers..................................................................................................118-119

HHA3A/R4ND”GWNIPANTRGE

® XS® Nozzles
CONVENTIONAL FUELING 2
Pressure activated, automatic shut-off nozzle for full-service and self-service stations.
FUEL FLOW
CONVENTIONAL FUELING •  X S® nozzle shuts off when: •  ® reduces New Unleaded Nozzles
— the pump shuts off. turbulence for straighter
— the gas tank is full. fuel flow and less splash MODEL DESCRIPTION SHIPPING WEIGHT LBS (KG)
— the lever is opened back spillage.
before the pump is 159559 with Three Notch Hold Open Clip and Waffle Splash Guard 3.0 (1.3)
turned on. •  Comes standard with
— the leak detector has not smooth full grip guard. New Light Duty Diesel Nozzles
completed the test cycle.
•  O ptional EZ Lever: MODEL DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  Stainless steel spout - two piece design cuts
bushing keeps spout tip opening force in half 159561 with Three Notch Hold Open Clip and Waffle Splash Guard 3.0 (1.3)
round and acts as a captive - easier “to-the-penny”
fastener to prevent tip-end dispensing Construction
sensor damage. - ADA compliant
Body One piece die cast aluminum
•  N ozzle is equipped with a Seals Fluorocarbon
unique Flo-Stop® device Packing Double o-ring seal protected by fiber reinforced Teflon®
that shuts off the nozzle if Lever One piece contoured steel with hard plastic cover
it falls from the fill tank or Inlet 3/4” / 19.1 mm NPT
raises above the horizontal.

LPM GPM WIDE OPEN FLOW
60 16
14
50
12
40
10

30 8 Unleaded
LDD
6 With Equalizer
20

4

10 2

00
PSI 2 4 6 8 10 12 14 16 18 20 22 24 26

KPa 20 40 60 80 100 120 140 160 180
INLET PRESSURE (SpG = .78)

9001:2015

CERTIFIED
C O M PA N Y

XS® Nozzles ®

Pressure activated, automatic shut-off nozzle for full-service and self-service stations. 3 CONVENTIONAL FUELING

Dimensions and System Options

Safe-T-Breaks®

MODEL NO. DESCRIPTION

008330 MAGBREAK® 3/4” F NPT

Swivels

MODEL NO. DESCRIPTION

000350 ¾” M x ¾” F NPT Multi-Plane Swivel

Spouts

MODEL NO. DESCRIPTION 131/2” /
001473 Unleaded Spout with StreamShaper® 342.9 mm
001471 Light Duty Diesel Spout with StreamShaper®

Pressure/Vacuum Vents

MODEL NO. DESCRIPTION
004885 2” Thread-On Pressure Vacuum Vent - NPT
005885 2 ” Thread-On Pressure Vacuum Vent with Internal Screen - NPT

Accessories, Testing and Maintenance

MODEL NO. DESCRIPTION
003593 Hold Open Clip Kit
007089 Nozzle Service Kit

Guards 91/2” /
241.3 mm

MODEL NO. DESCRIPTION
004145 Full Grip Guard
001808 Waffle Splash Guard

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

® 3/4” Swivel
3/4” SWIVELS 4
For standard fueling applications.
FUEL FLOW
CONVENTIONAL FUELING •  Compatible with unlead, •  M ulti-Plane for easy New 3/4” Multi-Plane Swivel
diesel, and Ethanol blends movement of nozzle.
through E10. MODEL DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  D ouble o-ring seals at each 000350 3/4” M x 3/4” F NPT Multi-Plane Swivel .50 (.22)
•  C ompact and light weight swivel provide long life at
for easy handling. low temperatures (-40° Construction
F/C).
•  H igh flow rates due to Body High Aluminum Zinc Alloy
laminar flow design. Inner o-ring Fluorsilicone
Outer o-ring Fluorocarbon

•  H igh strength step shoulder
bearing diameters and
impact absorbing stops.

Dimensions Flow Charts

Model 000350

LPM GPM WIDE OPEN FLOW
50
2 3/32” / 15
53.2 mm 40 12.5

30 10

4 5/16” / 7.5
109.5 mm 20

5

10 2.5
00
PSI 0 .5 1 1.5 2 2.5 3

KPa 0 5 10 15 20

* II 1 G INLET PRESSURE (SpG = .78)
EN13617-4
9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

3/4” MAGBREAK® ®

All Husky® Safe-T-Breaks® stop the flow of fuel on both sides of the separation and have 5 SAFE-T-BREAKS®
passed the demanding UL test requirements on separations without leaking or failing.

•  High impact resistant •  A bsorb line shock in New MAGBREAK®
polymer housing. excess of 450 psi at
17 gpm (31 bar at MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  3 /4” Female NPT inlets. 64.3 Lpm)
008330 MAGBREAK® 3/4” F NPT 1.21 (.55)
(Separates at less than 200 pounds pull force)

•  Also available in 3/4” Female •  Low scuff housing.
BSP threads. •  Line shock absorbing
008330 3/4” MagBreak® Reconnectable STB
•  3/4-pound lighter than design. Back Pressure Performance
competing magnetic •  S tops flow on both
breakaways.
sides of break.
•  T wo straight screwdrivers
used to separate. 30.0

•  E asier “separate to 25.0
inspect” method than
competition. Fuel Flow (GPM) 20.0

•  A ssurance of proper 15.0
reconnection using a
simple “twist to 10.0
lock” feature.
5.0

0.0
0 2 4 6 8 10 12 14 16 18 20
Inlet Pressure (PSI)

Husky® 008330
3/4” MAGBREAK­®

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

HUSKY CURB HOSE 6 ® Curb Hose

Wirebraid gasoline pump hose.

CONVENTIONAL FUELING •  R ecommended anywhere •  Flexibility of a softwall, Wirebraid Hoses
a hardwall or softwall hose durability of a hardwall.
is inappropriate. MODEL DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  Assures accurate readings
•  Recommended for all at the pump. CP10WB09L 5/8” Wirebraid low cost 9’ Assembly Hose 3.0 (1.4)
gasoline and gasoline/
Ethanol blends at Ethanol •  W ill not mark or scratch Construction
levels designated as vehicle finishes.
“gasohol” (E10 maximum Tube Black Nitrile
or less), diesel fuel and •  H ose material is private Cover Black CPE (chlorinated polyethylene), wrap impression
diesel fuel/biodiesel blends branded and UL Listed to Reinforcement Multiple textile braids with full diameter grounding sheath
with nominal biodiesel UL 330 and CAN/ Temperature Range -40°F to +180°F (-40°C to +82°C)
concentrations up to 5% ULC-S612-99.
(B0-B5), kerosene and fuel System Options
oil (heating oil), leaded and •  A ll curb pump hose
unleaded gasoline. assemblies are 100% Available in these Sizes
pressure tested, inspected
•  Resistant to crushing and for electrical continuity and ID NOM OD MAX WP WEIGHT
stands up to run-over. sample pull tested.
Size MM IN MM
•  Highly resistant to cuts, 5/8” 16 0.97 25 PSI MPA LB/FT KG/M
abrasions, sun and weather.
150 1.03 0.35 0.52

Couplings

Permanent internally expanded fixed chrome plated brass or external crimp zinc (L
type).
Reattachable fixed and Reattachable swivel 3/4” and 1” male NPT. UL does not
recognize field installation of reattachable fittings.

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Whip Hose ®

Wirebraid gasoline whip hose. 7 HUSKY WHIP HOSE

WIREBRAID WHIP HOSE: •  H ose Material is private New Whip Hose
•  Recommended anywhere a branded and UL listed.
MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
hardwall or softwall hose is •  All curb pump hose
inappropriate. assemblies are 100% CP10WB.75L 5/8” Wirebraid low cost 9” Assembly Hose 0.3 (0.14)
•  P rovides full flow with no pressure tested, inspected
internal spring guards and for electrical continuity and C on stru ction
will withstand full suction. sample pull tested
•  H ighly resistant to cuts, Tube Black Nitrile
abrasions, sun and weather. Cover Black CPE (chlorinated polyethylene), wrap impression
•  Flexibility of a softwall, Reinforcement Multiple textile braids with full diameter grounding sheath
durability of a hardwall. Temperature Range -40°F to +180°F (-40°C to +82°C)
•  R ecommended for all
gasoline and gasoline/ System Options
Ethanol blends at Ethanol
levels designated as Available in these Sizes
“gasohol” (E10 maximum
or less), diesel fuel and ID NOM OD MAX WP WEIGHT
diesel fuel/biodiesel blends
with nominal biodiesel Size MM IN MM PSI MPA LB/FT KG/M
concentrations up to 5% 5/8” 16
(B0-B5), kerosene and fuel 0.97 25 150 1.03 0.35 0.52
oil (heating oil), leaded and
unleaded gasoline. Couplings

Permanent internally expanded fixed chrome plated brass or external crimp zinc (L
type).
Reattachable fixed and Reattachable swivel 3/4” and 1” male NPT. UL does not
recognize field installation of reattachable fittings.

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

HHA1AR”NDNGWPIANTRGE

VIIIS Nozzles ®

Pressure activated, automatic shut-off nozzle with polymer handguard for truck stop 9 HIGH VOLUME FUELING
and other high volume full-service, self-service and unattended stations.

•  V IIIS nozzle shuts off when: •  Nozzle is equipped with a New Heavy Duty Diesel Nozzles with NPT
— the pump shuts off. unique Flo-Stop® device
— the gas tank is full. that shuts off the nozzle if MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
— the lever is opened it falls from the fill tank or
before the pump is raises above the horizontal. 177610 w ith Three Notch Hold Open Clip, Waffle 4.6 (2.0)
turned on. Splash Guard and Spout Bushing
— the leak detector has not
completed the test cycle. Construction

•  Spout is reinforced with Body Aluminum
thick aluminum bushing Seals Fluorocarbon
that retains spout spring Packing Double o-ring seal protected by fiber reinforced Teflon®
and keeps spout from Lever One piece contoured steel
rounding-in: the two Inlet 1” / 25.4 mm NPT
leading causes of clicking
off and splash-back spillage.

LPM GPM WIDE OPEN FLOW
300 80
270
240 70
210
FUEL FLOW 180 60
150
120 50

90 40
60
30 30

20

10
0

PSI 0 5 10 15 20 25 30 35 40 45

KPa 0 40 80 120 160 200 240 280
INLET PRESSURE (SpG = .78)

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

10 ® VIIIS Nozzles

HIGH VOLUME FUELINGCONVENTIONAL FUELING Pressure activated, automatic shut-off nozzle with polymer handguard for truck stop
and other high volume full-service, self-service and unattended stations.

Dimensions and System Options

Safe-T-Breaks®

MODEL NO. DESCRIPTION

008331 MAGBREAK® 1” F NPT CK

Swivels

MODEL NO. DESCRIPTION

000087 1” M x 1” F Multi-Plane Swivel

Spouts

MODEL NO. DESCRIPTION

002279 Complete Spout Assembly with Spout Bushing

Pressure/Vacuum Vents 13” /
330.2 mm
MODEL NO. DESCRIPTION 111⁄2” /
292.1 mm
004885 2” Thread-On Pressure Vacuum Vent - NPT

005885 2 ” Thread-On Pressure Vacuum Vent with Internal Screen - NPT

Accessories, Testing and Maintenance

MODEL NO. DESCRIPTION

003593 Hold Open Clip Kit

007089 Nozzle Service Kit

006645 Plunger Assy Lift Tool

Guards

MODEL NO. DESCRIPTION

004740 Full Grip Guard

001808 Waffle Splash Guard

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

1” Swivel ® 11 1” SWIVEL

For truck and high volume fueling.

•  Compatible with diesel •  Multi-Plane for easy New 3/4” Multi-Plane Swivel
fuels and Ethanol blends movement of nozzle.
through E10. MODEL DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  Double o-ring seals at each 000087 1” M x 1” F NPT Multi-Plane Swivel .96 (.43)
•  Compact and light weight swivel provide long life at
for easy handling. low temperatures (-40° Construction
F/C).
•  H igh flow rates due to Body High Aluminum Zinc Alloy
laminar flow design. Inner o-ring Fluorsilicone
Outer o-ring Fluorocarbon

•  High strength step shoulder
bearing diameters and
impact absorbing stops.

Flow Charts

LPM GPM WIDE OPEN FLOW

75 9001:2015 * II 1 G
280 EN13617-4
CERTIFIED
70 C O M PA N Y
260
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
65
FUEL FLOW 240 Dimensions

60 Model 00008
220
1.5” /
55 38.1 mm
200

50
180

45
160

40
140

35

120 30

100 25

80 20

60 15

40 10

20 5

00
PSI 0 1 2 3 4 5 6 7 8 9

KPa 0 10 20 30 40 50 60
INMLoEdTePl R00E4S8S6U0RE (SpG = .78)
Models 000087, 000095 5.2” /
132.1 mm

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

12 ® 1” MAGBREAK®

CONVENTIONAL FUELING All Husky® Safe-T-Breaks® stop the flow of fuel on both sides of the separation and have
passed the demanding UL test requirements on separations without leaking or failing.

•  H igh impact resistant •  A bsorb line shock in New MAGBREAK®
polymer housing. excess of 450 psi at
17 gpm (31 bar at MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  1 ” Female NPT inlets. 64.3 Lpm)
SAFE-T-BREAKS® •  Also available in 1” Female 008331 MAGBREAK® 1” F NPT CK 1.09 (.50)
•  Low scuff housing. (Separates at less than 225 pounds pull force)
BSP threads.
•  3 /4-pound lighter than •  L ine shock absorbing
design.
competing magnetic 008331 1” MagBreak® Reconnectable STB
breakaways. •  Stops flow on both Back Pressure Performance
•  Two straight screwdrivers sides of break.
used to separate. 40.0
•  E asier “separate to •  1 ” MAGBREAK® has lower
inspect” method than back pressure than 35.0
competition. competing magnetic
•  A ssurance of proper breakaways. Lower back Fuel Flow (GPM) 30.0
reconnection using a pressure means higher flow
simple “twist to rates.
lock” feature.
25.0

20.0

15.0

10.0

5.0

0.0
0 2 4 6 8 10 12 14 16 18 20

Inlet Pressure (PSI)

Husky® 008331
1” MAGBREAK®
with 3/4” Check Valve

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Curb Hose ® 13

Wirebraid gasoline pump hose. HUSKY CURB HOSE

•  R ecommended anywhere •  F lexibility of a softwall, Wirebraid Hoses
a hardwall or softwall hose durability of a hardwall.
is inappropriate. MODEL DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  Assures accurate readings
•  Recommended for all at the pump. CP16WB09L 1” Wirebraid low cost 9’ Assembly Hose 4.5 (2.0)
gasoline and gasoline/
Ethanol blends at Ethanol •  W ill not mark or scratch Construction
levels designated as vehicle finishes.
“gasohol” (E10 maximum Tube Black Nitrile
or less), diesel fuel and •  H ose material is private Cover Black CPE (chlorinated polyethylene), wrap impression
diesel fuel/biodiesel blends branded and UL Listed to Reinforcement Multiple textile braids with full diameter grounding sheath
with nominal biodiesel UL 330 and CAN/ Temperature Range -40°F to +180°F (-40°C to +82°C)
concentrations up to 5% ULC-S612-99.
(B0-B5), kerosene and fuel System Options
oil (heating oil), leaded and •  All curb pump hose
unleaded gasoline. assemblies are 100% Available in these Sizes
pressure tested, inspected
•  Resistant to crushing and for electrical continuity and
stands up to run-over. sample pull tested.

ID NOM OD MAX WP WEIGHT

•  H ighly resistant to cuts, Size MM IN MM PSI MPA LB/FT KG/M
abrasions, sun and weather. 5/8” 16
0.97 25 150 1.03 0.35 0.52

Couplings

Permanent internally expanded fixed chrome plated brass or external crimp zinc (L
type).
Reattachable fixed and Reattachable swivel 3/4” and 1” male NPT. UL does not
recognize field installation of reattachable fittings.

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

14 ® Curb Hose

Wirebraid gasoline pump hose.

HUSKY CURB HOSECONVENTIONAL FUELING WIREBRAID WHIP HOSE: •  Hose Material is private New Whip Hose
•  R ecommended anywhere a branded and UL listed.
MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
hardwall or softwall hose is •  All curb pump hose
inappropriate. assemblies are 100% CP16HW.75L 1” Wirebraid low cost 9” Assembly Hose 0.5 (0.23)
•  Provides full flow with no pressure tested, inspected
internal spring guards and for electrical continuity and Con stru ction
will withstand full suction. sample pull tested
•  Highly resistant to cuts, Tube Black Nitrile
abrasions, sun and weather. Cover Black CPE (chlorinated polyethylene), wrap impression
•  F lexibility of a softwall, Reinforcement Multiple textile braids with full diameter grounding sheath
durability of a hardwall. Temperature Range -40°F to +180°F (-40°C to +82°C)
•  Recommended for all
gasoline and gasoline/ System Options
Ethanol blends at Ethanol
levels designated as Available in these Sizes
“gasohol” (E10 maximum
or less), diesel fuel and ID NOM OD MAX WP WEIGHT
diesel fuel/biodiesel blends
with nominal biodiesel Size MM IN MM PSI MPA LB/FT KG/M
concentrations up to 5% 5/8” 16
(B0-B5), kerosene and fuel 0.97 25 150 1.03 0.35 0.52
oil (heating oil), leaded and
unleaded gasoline. Couplings

Permanent internally expanded fixed chrome plated brass or external crimp zinc (L
type).
Reattachable fixed and Reattachable swivel 3/4” and 1” male NPT. UL does not
recognize field installation of reattachable fittings.

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

HHA3A/R4ND”GWBISANPRGE

16 ® X DEF Nozzle

Automatic shut-off Diesel Exhaust Fluid (DEF) nozzle for full-service and self-service stations.

DIESEL EXHAUST FLUIDCONVENTIONAL FUELING •  L ighter than stainless steel •  Flow characteristics of New X DEF Nozzle with 3/4” BSPP
nozzles. nozzle reduces
crystallization of DEF. MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  Streamshaper ® reduces
turbulence for straighter •  Complies with ISO Standard 1215091N with Three Notch Hold Open Clip, Spout Ring, Magnetic
fuel flow and less splash 22241-2:2006. Accufuel® Spout and Gilbarco Magnetic Hand Guard 3.0 (1.3)
back spillage.
12964154N with Two Notch Hold Open Clip, EZ Lever and Wayne
•  Less expensive than Magnetic Hand Guard without Spout Groove 3.0 (1.3)
comparable nozzles.
Construction
•  Nozzle shuts off when the
DEF tank is full. Body Anodized Aluminum

•  Stainless steel spout for Seals Fluorocarbon o-rings and diaphragm
durability. Spout 19 mm diameter
Lever One-piece contoured steel with hard plastic cover
Inlet 3/4” / 19 mm NPT Female threads or
3/4” / 19 mm BSPP Face Seal threads
M34 1.5 Face Seal threads

DEF Flow(GPM) 20 X DEF Plastic Nozzle
18 Back Pressure Performance
16 24
14 X DEF
12
10 6 8 10 12 14 16 18 20 22 24 26
8
6 Inlet Pressure(PSI)
4
2
0

0

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

X DEF Nozzle ® 17

Automatic shut-off Diesel Exhaust Fluid (DEF) nozzle for full-service and self-service stations. DIESEL EXHAUST FLUID

Dimensions and System Options

Swivel/Safe-T-Break® Inline Combo

MODEL NO. DESCRIPTION

012828 3/4” BSP x 3/4” F BSP Swivel/Safe-T-Break® Combo

12-5/8” /
321 mm

Gilbarco Magnetic 8-11/16”/
Hand Guard 220 mm

Wayne Magnetic
Hand Guard

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

18 ® Swivel/STB Combo

SWIVEL/ SAFE-T-BREAKS® Swivel/STB inline combo.

CONVENTIONAL FUELING •  Single plane 360° rotation •  C heck valve to O-ring to New Swivel/STB Inline Combo
•  Unique to Husky® products, ensure reliable fuel shut-
off. MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
the steel ball bearing
design provides easier joint •  S eparates between 180 lbs. 012828 3/4” BSP x 3/4” F BSP Swivel/STB Combo 0.90 (0.40)
movement during high and 337 lbs.
pressure applications. C on stru ction
•  S afe-T-Break® is service •  Separates at angles up to
reconnectable. 90° Body Anodized aluminum
•  Check valve to stop flow of Seals Fluorocarbon
fuel on hose side. •  Compact and easy to Nuts Stainless steel, electroless nickel-plated steel
handle.

System Options

Guards

MODEL NO. DESCRIPTION

0008526 Scuff Guard for Safe-T-Break®

Dimensions

GPM WIDE OPEN FLOW 3.20"/
81.3 mm
15
FUEL FLOW
12.5
1.70" /
10 43.2 mm

7.5

5

2.5

0
PSI 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5

Inlet Pressure (SpG=.78)

9001:2015 * II 1 G
EN13617
CERTIFIED Type 2
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

P/VCAVPESNT

P/V VENTS 20 ® P/V Vents

CONVENTIONAL FUELING All Pressure/Vacuum Vents have three (3) separate valves that address pressure/vacuum
conditions in underground storage tanks (UST) and above ground storage tanks (AST).

Model 004885 Model 005885* Pressure/Vacuum Vents
•  T he three (3) valve system •  H as an internal screen to
MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
provides the necessary protect the pressure plate
protection and durability in the event of a bad bulk 004885 2 in / 51 mm Thread-On Pressure / 1.2 (.54)
needed in UST and AST vent drop. Vacuum Vent Cap
caps.
•  The safety over-pressure 005885* 2 in / 51 mm Thread-On Pressure / 1.2 (.54)
•  The vacuum valve is valve is designed to handle Vacuum Vent Cap with internal screen
diaphragm operated and high pressure / high flow
provides ten (10) times conditions. This valve will Construction
more sealing force than vent up to 7900 SCFH at 2
gravity devices. It psi / .14 bar. Body Aluminum
consistently opens at 6” -
10” of water column (WC) / •  Certified to less than 1/3 of Screen 40 Mesh Stainless Steel
1.5 - 2.5 KPa vacuum. the CARB EVR Standard
CP-201 which allows Internal Screen 40 Mesh Stainless Steel (005885 only)
•  T he first over-pressure installation of three (3) P/V
valve is diaphragm vents maximum. This Set Screws Stainless Steel
operated, giving ten (10) reduces installation time by
times more sealing force not having to manifold the Deflector Aluminum
than gravity devices. It vent pipes together.
opens at 2.5” - 6” WC / .63
- 1.5 KPa pressure. •  Has a threaded vent cap
that is easily installed by
•  Not for use in California / using the cast-on hex nut.
EVR applications. This also allows tightening
without having to go
•  Certified to less than 1/3 of between vent pipes.
the CARB EVR Standard
CP-201 which allows •  C onstructed from materials
installation of three (3) P/V 100% compatible with
Vents maximum. This B0-B20 and E0-E85.
reduces installation time by
not having to manifold the
vent pipes together.

•  T hreaded vent cap that is
easily installed by using the
caston hex nut which allows
tightening without having to
go between vent pipes.

This component was tested to and met the following criteria:
PRES. 2.5-6 IN. W.C.
VAC. 6-10 IN. W.C.
.05 CFH @ +2 IN. W.C.
.21 CFH @ -4 IN. W.C.

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

P/V Vents ® 21 P/V VENTS

All Pressure/Vacuum Vents have three (3) separate valves that address pressure/vacuum con-
ditions in underground storage tanks (UST) and above ground storage tanks (AST).

Dimensions and System Options

Adapter

MODEL NO. DESCRIPTION

005041 3 in / 76 mm Thread to 2 in / 51 mm Thread Pipe Adapter

Testing Equipment

MODEL NO. DESCRIPTION

005426 Pressure / Vacuum Vent Test Adapter

4 11/16” /
119.06 mm

4 23/32” /
119.86 mm

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

EZ-CKOINTNSECT

EZ-Connect® ® 23

The only certified, pre-assembled, pressure and continuity-tested hanging hardware. EZ-CONNECT®

•  Stage II Decommissioning •  T hread sealant used on all 3/4” Unleaded EZ-Connect® Kit
Ready. component connections
(Gasoila®). MODEL NO. DESCRIPTION
•  Pre-fabricated hanging 011154 EZ-Connect Kit with XS nozzle with Three Notch Hold Open Clip and
hardware assembly. •  All required hanging
hardware for Waffle Splash Guard, 3/4” M x 3/4” F NPT Multi-Plane Swivel, MAGBREAK®
•  I ncludes a robust multi- decommissioning 3/4” F NPT, 5/8” Wirebraid low cost 9’ Assembly Hose, and 5/8” Wirebraid
plane Husky® swivel. in one single package. low cost 9” Assembly Whip Hose

•  EZ-Connect® hoses 3/4” Light Duty Diesel EZ-Connect® Kit
assembled with UL/CUL
certified components. MODEL NO. DESCRIPTION
011463 EZ-Connect Kit with XS nozzle with Three Notch Hold Open Clip and
•  100% continuity/pressure
tested. Waffle Splash Guard, 3/4” M x 3/4” F NPT Multi-Plane Swivel, MAGBREAK®
3/4” F NPT, 5/8” Wirebraid low cost 9’ Assembly Hose, and 5/8” Wirebraid
low cost 9” Assembly Whip Hose

1” High Flow EZ-Connect® Kit

MODEL NO. DESCRIPTION
010934 EZ-Connect Kit with VIIIS nozzle with Three Notch Hold Open Clip,

Waffle Splash Guard and Spout Bushing, 1” M x 1” F NPT Multi-Plane
Swivel, MAGBREAK® 1” F NPT CK, 1” Wirebraid low cost 9’ Assembly
Hose, and 1” Wirebraid low cost 9” Assembly Whip Hose

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

LOWHOPSEERM

Low Perm Hose ® 25

Premium Low Permeation Hardwall Gasoline Pump Hose. LOW PERM HOSES

•  R ecommended for all •  A ll curb pump hose Low Perm Curb Hose
gasoline and gasoline/ assemblies are 100%
Ethanol blends at Ethanol pressure tested, inspected MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
levels designated as for electrical continuity
“gasohol” (E10 maximum and sample pull tested. CP10LP09 5/8” Low Perm Hardwall 10’ Assembly Hose 4.6 (2.0)
or less), diesel fuel and
diesel fuel/biodiesel blends •  Improves ozone and Low Perm Whip Hose
with nominal biodiesel abrasion resistance while
concentrations up to 5% providing increased life. MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
(B0-B5), kerosene and fuel
oil (heating oil), leaded and •  R esists kinking and CP10LP.75 5/8” Low Perm Hardwall 9” Assembly Hose 4.6 (0.3)
unleaded gasoline where eliminates meter creep.
low permeation (<10g/m2/ Construction
day) is required. •  Will not mark or scratch
vehicle finishes. Tube Black Nitrile
•  D esigned for durability,
flexibility, and easy •  Improves draping and Cover Black CPE (Chlorinated Polyethylene), wrap impression
handling. handling characteristics.
Reinforcement Multiple textile braids with dual static wire helix
•  H ighly resistant to cuts, •  I mproves ozone and
abrasions, sun and weather. abrasion resistance while Temperature Range -40°F to +180°F (-40°C to +82°C)
providing increased life.
•  Hose material is private Available in these Sizes
branded and UL Listed to
UL 330 for low permeation. ID NOM OD MAX WP WEIGHT

Size MM IN MM PSI MPA LB/FT KG/M
5/8” 16
1.03 26 150 1.03 0.37 0.55

Couplings

P ermanent, external crimp, zinc plated steel couplings, fixed and swivel

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

C(EOECNNOVH)ENANONTZCIOZELNDEASL

(ECO) Nozzle ® 27

Automatic shut-off conventional nozzle equipped with a mechanical interlock that shuts ECO NOZZLES
off the nozzle if it falls from the fill tank.

•  U nique internal interlock •  Lightest insertion “force” New Unleaded Nozzles
device that shuts off the of any safety interlock
fuel flow before the spout operated nozzle. MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
is out of the tank.
•  Comes standard with 1190404 with Two Notch Hold Open Clip, EZ Lever and Drip Less
•  Aluminum casting with high smooth full grip guard. Spout 2.8 (1.3)
impact polymer hand guard
provides a lightweight, •  CARB compliant for drips, Construction
easier to handle spills, spitting and liquid
conventional nozzle. retention. Body One piece die cast aluminum
Seals Fluorocarbon
•  2-piece lever is easier •  Unique tilt poppet Packing Double o-ring seal protected by fiber reinforced Teflon®
to use: maximizes “to-the-penny” Lever Two piece high impact polymer
— requires ½ the force to dispensing. Inlet ¾” / 19.1 mm NPT
open nozzle.
— ADA compliant. •  C old weather version
contains a poppet disc seal
•  A reinforced stainless steel rated to -40° F/C to
spout bushing keeps spout prevent fuel leakage from
tip round and acts as a the main seal in extreme
captive fastener to prevent cold.
tip-end sensor damage.

•  D rip Less spout reduces/ LPM GPM WIDE OPEN FLOW
eliminates drips from 60 16 4 6 8 10 12 14 16 18 20 22 24 26 28
spout.
50 14
•  S treamShaper ® reduces FUEL FLOW 12 UNL
turbulence for straighter
fuel flow and less splash 40 10 UNL
back spillage. w/Flow Limiter
30 8

6
20

4

10 2
00
PSI 2

KPa 20 40 60 80 100 120 140 160 180

INLET PRESSURE (SpG = .78)

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

28 ® (ECO) Nozzle

CONVENTIONAL FUELING Pressure activated, automatic shut-off nozzle with polymer handguard for truck stop
and other high volume full-service, self-service and unattended stations.

Dimensions and System Options

(ECO) NOZZLES Safe-T-Breaks®

MODEL NO. DESCRIPTION

008330 ¾” F x ¾” F NPT Reconnectable MagBreak®

Swivels

MODEL NO. DESCRIPTION

000350 ¾” M x ¾” F NPT Multi-Plane Swivel

Spouts

MODEL NO. DESCRIPTION 131/2” /
342.9 mm
013664 Unleaded ECO Spout Assembly Kit 9-13/32” /
238.9 mm
Pressure/Vacuum Vents

MODEL NO. DESCRIPTION

004885 2” Thread-On Pressure Vacuum Vent - NPT

005885 2 ” Thread-On Pressure Vacuum Vent with Internal Screen - NPT

Guards

MODEL NO. DESCRIPTION

014034 Full Grip Nozzle Guard

Low Perm Hoses

MODEL NO. DESCRIPTION

CP12LP9 3/4” Low Perm Hardwall 9’ Assembly Hose
CP12LP.75 3/4” Low Perm Hardwall 9” Assembly Hose

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

AHLHTAAEFRRNUDNEGWLAIANSTRGIVEE

30 ® XS® E85 Nozzles

CONVENTIONAL FUELING Pressure activated, automatic shut-off nozzle for full-service, self-service and
unattended stations.

•  X S® E85 Nozzle shuts •  A reinforced stainless steel New Unleaded Nozzles
off when: spout bushing keeps the
ETHANOL FUELING — the pump shuts off. spout tip round and acts as MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
— the gas tank is full. a captive fastener to
— the lever is opened prevent tip-end sensor 659504 with Three Notch Hold Open Clip 3.0 (1.3)
before the pump is damage.
turned on. Construction
— the leak detector has not •  Nozzle is equipped with a
completed the test cycle. unique Flo-Stop® device Body One piece die cast aluminum with Electroless Nickel Plating
that shuts off the nozzle if Seals Fluorocarbon
•  A luminum body, spout, and it falls from the fill tank or Packing Double O-ring seal protected by fiber reinforced Teflon®
internal parts are nickel raises above the horizontal. Lever One piece contoured steel with hard plastic cover
plated to prevent Inlet ¾” / 19 mm NPT
contamination and •  A ll seals are UL approved
corrosion from Ethanol fluorocarbon compounds to
blends. prevent deterioration from
Ethanol blends.
•  StreamShaper ® reduces
turbulence for straighter •  N ew poppet seal design
fuel flow and less splash improves flow control and
back spillage. provides enhanced
endurance over time.
•  Compatible with unleaded
and all Ethanol blends
through E-85.

•  Nozzle comes with smooth LPM GPM WIDE OPEN FLOW
full grip guard. 60 16
14
50
12
40
10
FUEL FLOW
30 8

6
20

4

10 2
00
PSI 2 4 6 8 10 12 14 16 18 20 22 24

KPa 20 40 60 80 100 120 140 160 180
INLET PRESSURE (SpG = .78)

9001:2015

CERTIFIED
C O M PA N Y

XS® E85 Nozzles ® 31

Pressure activated, automatic shut-off nozzle for full-service, self-service and ETHANOL FUELING
unattended stations.

Dimensions and System Options

Safe-T-Breaks®

MODEL NO. DESCRIPTION

006273 ¾” F x ¾” F Non-Reconnectable E85 Safe-T-Break®

Swivels

MODEL NO. DESCRIPTION

006350^ ¾” M x ¾” F Multi-plane E85 Swivel

Spouts

MODEL NO. DESCRIPTION

006207 Unleaded E85 Spout Assembly

Pressure/Vacuum Vents 131/2” /
342.9 mm
MODEL NO. DESCRIPTION
004885 2” Thread-On Pressure Vacuum Vent - NPT
005885 2 ” Thread-On Pressure Vacuum Vent with Internal Screen - NPT

Accessories, Testing and Maintenance

MODEL NO. DESCRIPTION

003593 Hold Open Clip Kit

007490 Internal Flo-Equalizer® - 10 gpm / 37.9 Lpm

007089 Nozzle Service Kit

004951 Spout Nut

000397 Unleaded Spout Gauge

Guards 91/2” /
241.3 mm
MODEL NO. DESCRIPTION

003376 Black Handle Guard

004145 Full Grip Guard

001806 Full Grip Reguard

005494 Lever Guard

003440 Mate Easy-on Package

003795 Mate Guard

006628 POPD® Clear Cover

006665 POPD® Full Grip Guard

007205 POPD® Full Grip Reguard

007815 POPD® Mate Guard

001506 Protection Package

001809 Reguard Protection Package

001808 Waffle Splash Guard

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

32 ® E85 Safe-T-Breaks®

All Husky® Safe-T-Breaks® stop the flow of fuel on both sides of the separation.

CONVENTIONAL FUELING •  Compatible with unleaded, •  F eatures same instant E85 Safe-T-Breaks®
diesel and all Ethanol closing dual poppet check
blends through E85. valve design as MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
Model 006360.
SAFE-T-BREAKS® •  Unit is lightweight, 006273 ¾” F x ¾” F Standard Non-Reconnectable
inexpensive and disposable. •  M aximum separation of Safe-T-Break® .30 (.13)
300 lbf / 1334.5 N.
Construction

Body Aluminum with Electroless Nickel Plating
Seals Fluorocarbon
Springs Stainless Steel
Threads ¾” / 19.1 mm NPT

Dimensions and System
Options

Accessories, Testing and Maintenance

MODEL NO. DESCRIPTION

007000 Safe-T-Break® Drain Cup

Model 006273 Model 006273

FUEL FLOW LPM GPM WIDE OPEN FLOW 315/32” /
100 25 2 4 6 8 10 12 88.1 mm

80 20 13/8” /
34.9 mm
60 15

40 10

20 5

00
PSI 0

KPa 0 10 20 30 40 50 60 70 80
INLET PRESSURE (SpG = .78)

9001:2015

CERTIFIED
C O M PA N Y

E25 Safe-T-Breaks® ® 33

All Husky® Safe-T-Breaks® stop the flow of fuel on both sides of the separation. SAFE-T-BREAKS®

•  C ompatible with unleaded, •  Retains the UL listing after E25 Safe-T-Breaks®
diesel and all Ethanol being reconnected.
blends through E25. MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  Unit separates at less then
•  Unusual interface between 200 lbf / 889.6 N which 006360 ¾” F x ¾” F Reconnectable Safe-T-Break® .58 (.26)
a pre-loaded spring and a minimizes “backlash” force
single turn wave spring that of separation, reducing Construction
enables valve to resist damage to equipment.
sudden pressure build-up Body Aluminum with Electroless Nickel Plating
in the hose resulting in Seals Fluorocarbon
nuisance separations. Springs Stainless Steel
Threads ¾” / 19.1 mm NPT
Stainless steel load and latch spring reverse mechanism
Hardened stainless steel latch ring and ball

Dimensions and System
Options

Accessories, Testing and Maintenance

MODEL NO. DESCRIPTION

007000 Safe-T-Break® Drain Cup

FUEL FLOW LPM GPM WIDE OPEN FLOW
25 12 3 45
Model 006360 80
70 20
45/8” / 60
117.5 mm 50 15
40 10
30
20 5
10 0
PSI 0

11/4” / KPa 0 10 20 30
31.8 mm INLET PRESSURE (SpG = .78)

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

® E85 Swivel
SWIVELS 34
Husky Model 6350 Multi-Plane Swivel.
FUEL FLOW
CONVENTIONAL FUELING •  Multi-Plane, Full 360° •  Compact and light weight New Swivel/STB Inline Combo
spherical rotation for easy for easy handling.
movement of nozzle. MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  Double o-ring seals at each
•  C ompatible with unlead, swivel provide long life and 006350 3/4” M x 3/4” F Multi-plane swivel 0.44 (0.19)
diesel, and all Ethanol low temperature (-40° F/C)
blends through E100. performance. Con stru ction

•  C ompatible with fuels •  H igh strength step shoulder Body Anodized aluminum
containing alcohol. bearing diameters and Inner O-ring Fluorocarbon
impact absorbing stops. Outer O-ring Stainless steel, electroless nickel-plated steel
•  High flow rate due to
laminar flow design.

System Options

Guards

MODEL NO. DESCRIPTION

0008526 SLcuPffMGuard GfoPr SMafe-T-Break® WIDE OPEN FLOW

20
60 15

40 10

20 5
00
PSI 0 1 2 3 4 5

KPa 0 10 20 30 40
INLET PRESSURE (SpG = .78)

Model 6350

23/32” /
53.2 mm

45/16” /
109.5 mm

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

HHPARARENDMGWIIUANMRGE

36 ® XS® EZ Lever

CONVENTIONAL FUELING Pressure activated, automatic shut-off nozzle for full-service and self-service stations.

CONVENTIONAL FUELING •  X S® nozzle shuts off when: •  ® reduces New Unleaded Nozzles
— the pump shuts off. turbulence for straighter
— the gas tank is full. fuel flow and less splash MODEL DESCRIPTION SHIPPING WEIGHT LBS (KG)
— the lever is opened back spillage. 1163504 with Two Notch Hold Open Clip 3.1 (1.4)
before the pump is
turned on. •  C omes standard with New Light Duty Diesel Nozzles
— the leak detector has not smooth full grip guard.
completed the test cycle. MODEL DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  2-piece lever is easier 1163503 with Two Notch Hold Open Clip 3.1 (1.4)
•  S tainless steel spout to use:
bushing keeps spout tip — requires ½ the force to Construction
round and acts as a captive open nozzle.
fastener to prevent tip-end — ADA compliant Body Die cast aluminum with polymer handguard
sensor damage. Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
•  N ozzle is equipped with a Lever Polymer lever
unique Flo-Stop® device Inlet 3/4” / 19 mm NPT
that shuts off the nozzle if
it falls from the fill tank or
raises above the horizontal.

LPM GPM WIDE OPEN FLOW
60 16
14
50
12
40
10
FUEL FLOW
30 8 Unleaded
LDD
6 With Equalizer
20

4

10 2
00
PSI 2 4 6 8 10 12 14 16 18 20 22 24 26

KPa 20 40 60 80 100 120 140 160 180
INLET PRESSURE (SpG = .78)

9001:2015

CERTIFIED
C O M PA N Y

XS® EZ Lever ® 37

Pressure activated, automatic shut-off nozzle for full-service and self-service stations. CONVENTIONAL FUELING

Dimensions and System Options

Safe-T-Breaks®

MODEL NO. DESCRIPTION

008330 MAGBREAK AK® 3/4” F NPT

Swivels

MODEL NO. DESCRIPTION

000350 ¾” M x ¾” F NPT Multi-Plane Swivel

Spouts

MODEL NO. DESCRIPTION 131/2” /
001473 Unleaded Spout with StreamShaper® 342.9 mm
001471 Light Duty Diesel Spout with StreamShaper®

Pressure/Vacuum Vents

MODEL NO. DESCRIPTION
004885 2” Thread-On Pressure Vacuum Vent - NPT
005885 2” Thread-On Pressure Vacuum Vent with Internal Screen - NPT

Accessories, Testing and Maintenance

MODEL NO. DESCRIPTION

007089 Nozzle Service Kit

Guards 91/2” /
241.3 mm

003376 Black Handle Guard

001808 Mate Guard
001808 Waffle Splash Guard

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

38 ® Hardwall Hose

Wirebraid gasoline pump hose.

CONVENTIONAL FUELING •  Recommended anywhere •  Flexibility of a softwall, Wirebraid Hoses
a hardwall or softwall hose durability of a hardwall.
is inappropriate. MODEL DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  Assures accurate readings
HUSKY CURB HOSE •  Recommended for all at the pump. CP10HW09L 5/8” Hardwall low cost 9’ Assembly Hose 3.5 (1.6)
gasoline and gasoline/
Ethanol blends at Ethanol •  W ill not mark or scratch Construction
levels designated as vehicle finishes.
“gasohol” (E10 maximum Tube Black Nitrile
or less), diesel fuel and •  H ose material is private
diesel fuel/biodiesel blends branded and UL Listed to Cover Black CPE (chlorinated polyethylene), wrap impression
with nominal biodiesel UL 330 and CAN/
concentrations up to 5% ULC-S612-99. Reinforcement Multiple textile braids with dual static wire helix
(B0-B5), kerosene and fuel
oil (heating oil), leaded and •  A ll curb pump hose Temperature Range -40°F to +180°F (-40°C to +82°C)
unleaded gasoline. assemblies are 100%
pressure tested, inspected Body 5/8” Black Hardwall Available
•  Resistant to crushing and for electrical continuity and
stands up to run-over. sample pull tested. System Options

Available in these Sizes

ID NOM OD MAX WP WEIGHT

•  Highly resistant to cuts, Size MM IN MM PSI MPA LB/FT KG/M
abrasions, sun and weather. 5/8” 16
1.03 26 150 1.03 0.39 0.58

Couplings

Permanent internally expanded fixed chrome plated brass or external crimp zinc (L
type).
Reattachable fixed and Reattachable swivel 3/4” and 1” male NPT. UL does not
recognize field installation of reattachable fittings.

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hardwall Whip ® 39

Hardwall gasoline whip hose. HUSKY WHIP HOSE

HARDWALL WHIP HOSE: •  All curb pump hose New Whip Hose
assemblies are 100%
•  R ecommended anywhere a pressure tested, inspected MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
hardwall hose is required. for electrical continuity and
sample pull tested CP10HW.75L 5/8” Hardwall low cost 9” Assembly Hose 0.3 (0.14)
•  H ighly resistant to cuts,
abrasions, sun and weather. C on stru ction

•  I mproves ozone and Tube Black Nitrile
abrasion resistance while Cover Black CPE (chlorinated polyethylene), wrap impression
providing increased life. Reinforcement Multiple textile braids with full diameter grounding sheath
Temperature Range -40°F to +180°F (-40°C to +82°C)
•  Recommended for all
gasoline and gasoline/ System Options
Ethanol blends at Ethanol
levels designated as Available in these Sizes
“gasohol” (E10 maximum
or less), diesel fuel and ID NOM OD MAX WP WEIGHT
diesel fuel/biodiesel blends
with nominal biodiesel Size MM IN MM PSI MPA LB/FT KG/M
concentrations up to 5% 5/8” 16
(B0-B5), kerosene and fuel 0.97 25 150 1.03 0.35 0.52
oil (heating oil), leaded and
unleaded gasoline.

•  H ose Material is private Couplings
branded and UL listed.
Permanent internally expanded fixed chrome plated brass or external crimp zinc (L
type).
Reattachable fixed and Reattachable swivel 3/4” and 1” male NPT. UL does not
recognize field installation of reattachable fittings.

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

® High Volume Swivel
SWIVELS 40
For truck and high volume fueling.
FUEL FLOW
CONVENTIONAL FUELING All Husky® Multi-Plane Husky® High Volume Multi- New Swivel/STB Inline Combo
Swivels Plane Swivels
•  C ompatible with diesel MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
•  M ulti-Plane, full 360°
fuels and Ethanol blends spherical rotation for 004860 1” M x 1” F High flow multi-plane swivel 1.4 (0.63)
through E10. easy movement of nozzle.
•  C ompact and light weight C on stru ction
for easy handling. •  For use with high flow
•  High flow rates due to nozzles with flow rates Body Aluminum, zinc and zinc plated steel
laminar flow design. up to 100 gpm/ 378 Lpm. Inner O-ring Fluorsilicone
•  H igh strength step shoulder Outer O-ring Fluorocarbon
bearing diameters and •  R aised stainless steel ball
impact bearings provide easy joint LPM GPM WIDE OPEN FLOW
absorbing stops. movement, greatly
•  D ouble o-ring seals at each improving ease of swivel 75
swivel provide long life at when used on 280
low temperatures (-40° higher pressure systems.
F/C). 70
•  75% less back pressure. 260

65
240

60
220

55
200

50
180

45
160

40
140

35

120 30

100 25

80 20

60 15

40 10

20 5

00
PSI 0 1 2 3 4 5 6 7 8 9

KPa 0 10 20 30 40 50 60
INLET PRESSURE (SpG = .78)
Model 004860

Model 004860

2.8” /
71.1 mm

4.6” /
116.8 mm

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MHATHAIENARSTNTDEGIWNNIANGARGN&ECE

42 ® Nozzle Service Kit

TESTING & MAINTENANCE Hanging hardware service kit for testing and maintenance.

CONVENTIONAL FUELING •  Nozzle Service Device •  Provides safe collection of Nozzle Service Kit
(NSD) can be used with all fuel when replacing
brands / styles of retail nozzles, Safe-T-Breaks® and MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
nozzles. fuel filters.
007089 N ozzle Service Kit(includes
part 006662 NSD, 007000 Safe-T-Break®
•  N SD provides easier •  A llows product Drain Cup, 007004, Fuel Filter Cup, 9.5 (4.3)
removal and installation of maintenance without 007086 Service Pail, 007088 NSD Pliers,
nozzles - keeps nozzles off getting fuel directly on 007332 Shear Valve Wrench and
the ground. hands / skin. 007098 Fuel Filter Tool)

•  S afe-T-Break® Drain Cup can •  N SD, Safe-T-Break® Drain Basic Nozzle Service Kit
be used with all brands of Cup, Fuel Filter Cup,
breakaways - even non- wrench and pliers all fit MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
reconnectable versions. inside the service pail for
easy transportation. 007262 Basic Nozzle Service Kit (includes
•  Safe-T-Break® Drain Cup part 006662 NSD, 007000 Safe-T-Break®
allows for pressure relief Drain Cup, 007004, Fuel Filter 9.0 (4.0)
making reconnecting easier. Cup and 007086 Service Pail)

Deluxe Nozzle Service Kit

•  Fuel Filter Cup can be used MODEL NO. DESCRIPTION SHIPPING WEIGHT LBS (KG)
on all brands / styles of
automotive and diesel 007263 D eluxe Nozzle Service Kit (includes
dispenser fuel filters. part 006662 NSD, 007000 Safe-T-Break®
Drain Cup, 007004, Fuel Filter Cup,
007086 Service Pail, 007332 Shear Valve 9.5 (4.3)
Wrench, 007348 Deluxe Service Pliers
and 007349 Deluxe Fuel Filter Pliers)

Part No. 007262 Construction Steel
Polypropylene
Service Pail Polypropylene
Nozzle Service Device (NSD) Plastisol
Safe-T-Break® Drain Cup
Fuel Filter Cup

Individual Nozzle Service Kit Parts

MODEL NO. DESCRIPTION

006662 Nozzle Service Device (NSD)

007000 Safe-T-Break® Drain Cup

007004* Fuel Filter Cup

007086 Service Pail

007088 NSD 12” Pliers

007098 Fuel Filter Tool (Wrench)

007099 Fuel Filter Service Kit (includes part 007004 Fuel Filter Cup
and 007098 Fuel Filter Tool)

007332 Shear Valve Wrench

007348 Deluxe Service Pliers

007349 Deluxe Fuel Filter Pliers

007350 Deluxe Service Took Kit (includes 007332 Shear Valve Wrench, 007348
Service Pliers, and 007349 Fuel Filter Pliers)

008071 Fuel Filter Cup with 5” Base

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Fill Neck Device ® 43

Mobile fill neck device for functional testing of automatic shut-off nozzles. TESTING & MAINTENANCE

•  Optimized for assessing •  Built with the leading fill Mobile Fill Neck
nozzle performance by neck in the industry.
simulating a real-time tank MODEL NO. DESCRIPTION
fueling environment. •  Anodized to prevent 014381 Unleaded mobile fill neck device
corrosion.
•  Equipped with a ball valve C on stru ction
for easy drainage and •  Unique design aids service
cleanup. technicians with diagnosis Anodized aluminum, stainless steel & brass
of damaged or worn nozzles
•  E ngineered to have a robust in the field. Mobile Fill Neck Device Accessories
design that ensures
longevity. MODEL NO. DESCRIPTION

•  Folds into a compact size 006662 Nozzle Service Device (NSD)
for easy transport and
storage. 007000 Safe-T-Break® Drain Cup

007004* Fuel Filter Cup

007086 Service Pail

007088 NSD 12” Pliers

007089 Nozzle Service Kit(includes part 006662 NSD, 007000 Safe-T-
Break® Drain Cup, 007004, Fuel Filter Cup, 007086 Service Pail,
007088 NSD Pliers, 007332 Shear Valve Wrench and 007098 Fuel
Filter Tool)

007098 Fuel Filter Tool (Wrench)

007099 Fuel Filter Service Kit (includes part 007004 Fuel Filter Cup
and 007098 Fuel Filter Tool)

007262 Basic Nozzle Service Kit (includes part 006662 NSD, 007000 Safe-T-
Break® Drain Cup, 007004 Fuel Filter Cup and 007086 Service Pail)

007263 Deluxe Nozzle Service Kit (includes part 006662 NSD, 007000
Safe-T-Break® Drain Cup, 007004 Fuel Filter Cup, 007086 Service
Pail, 007332 Shear Valve Wrench, 007348 Deluxe Service Pliers and
007349 Deluxe Fuel Filter Pliers)

007332 Shear Valve Wrench

007348 Deluxe Service Pliers

007349 Deluxe Fuel Filter Pliers

007350 Deluxe Service Took Kit (includes 007332 Shear Valve Wrench,
007348 Service Pliers, and 007349 Fuel Filter Pliers)

008071 Fuel Filter Cup with 5” Base

9001:2015

CERTIFIED
C O M PA N Y

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

2325 Husky Way • Pacific, MO 63069
(800) 325-3558 • Fax (636) 825-7300

www.husky.com • [email protected]

MADE IN THE U.S.A.

INSTSAHLELEATTSION

MODEL 004885 004885
Recommended Installation, Maintenance

and Inspection Instructions

Pressure Vacuum Vent

Important safety instructions - save these instructions in a readily accessible location

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

WARNING Designed for use at motor fuel dispensing facilities only.

INSTALLATION INSTRUCTIONS

NOTE: Always adhere to installation / usage instructions and warnings. Improper use may
result in injury, damage or hazardous spill.

1. Remove the Pressure Vacuum (P/V) vent from the carton and visually inspect for any shipping
damage. Shipping damage would include loose components in the carton or noticeable dents in
the housing or rain hat. Do not touch the internal components. If concerned about shipping dam-
age, perform the California Air Resources Board (CARB) TP-201.1E bench test before installing.

2. R emove the old PV vent and use a wire brush or similar tool to remove all debris from the vent
stack threads.

3. Apply fuel resistant pipe sealant (not Teflon® tape) to the threads on the 2” / 50.8 mm vent stack.
We recommend the thread sealing compound Gasoila® Soft-Set or equivalent that is UL Classified.

4. Bring the P/V vent to the top of the vent stack without tossing it or touching internal components.

5. S crew the P/V vent onto the vent stack by hand. Tighten firmly with a 1-1/8” (29 mm) wrench using
the hex fitting on top of the vent with approximately 20-50 lbf·ft / 27.1 – 67.8 N·m torque, but do not
overtighten.

TESTING / MAINTENANCE / INSPECTION

Testing Criteria Per TP201.1E and Exhibit 4 of applicable Phase 1 E.O.

Leak rate: Pressure = .05 CFH @ 2" wc, Vacuum = .21 CFH @ -4" wc.
Cracking Pressure = 2½" to 6" wc, Vacuum = -6" to -10" wc.

Annually Inspect the P/V vent valve • All drive aways, maintenance and
for foreign objects: inspection activities must be logged
using the serial number of the individual
product.

1. R emove the screws that hold on the • Apply city, state, or federal testing
top cover. Do not remove the screens. regulations as appropriate.
2. Remove any debris from inside the
lower cover. ANY TEST / INSPECTION FAILURE
3. C heck the drain holes in the lower REQUIRES IMMEDIATE EQUIPMENT
cover. REPLACEMENT OR REMOVAL FROM
4. Reinstall the top cover.
5. Tighten the screws firmly. SERVICE.

MADE IN THE USA

Husky Corporation • 2325 Husky Way • Pacific, MO 63069 • Phone: (800) 325-3558 • Fax: (636) 825-7300 • www.husky.com

Page 1 009041-13 2/2020

ALWAYS ADHERE TO INSTALLATION / USAGE INSTRUCTIONS AND WARNINGS.

Improper use may result in injury, damage, or hazardous spill.

GENERAL WARNINGS / INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC

SHOCK OR INJURY TO PERSONS: • Always place containers on the ground

• Use of equipment is at individuals’ own risk. before filling.

• Always abide and adhere to city, state, and • Always discharge static electricity before

federal regulations regarding use and using or servicing equipment by touching

installation of dispensing equipment. a metal part of the dispenser before and

• Always follow the dispenser manufacturer’s after fueling vehicle.

instructions. • Never smoke within 20 ft / 6.1 m of

• Always turn off all power to dispenser dispensers.

during maintenance and inspection • Never keep in service past recommended

activities. life.

• Always close the shear valves during • Never leave the nozzle unattended while

maintenance and inspection activities. dispensing fuel.

• Always relieve pressure from system prior • Never use sparking or flaming devices

to performing maintenance activities. within 20 ft / 6.1 m of dispensers.

• Always check continuity after installation • Never use power tools near dispensers or

using a megohmeter (Refer to PEI RP 400 to aid in the installation process.

for details). • Never use cell phone within 20 ft / 6.1 m of

• Always replace or remove from service dispensers.

damaged or leaking dispensing equipment • Never reenter car when fueling vehicle.

immediately. • Never allow gasoline to touch eyes or skin.

• Always report leaks / spills / accidents • Never use at flow rates in excess of

to appropriate authorities. regulatory guidelines.

• Always wear appropriate safety equipment • Never use at flow rates less than 5 gpm /

during maintenance activities. 18.9 Lpm.

• Always have appropriate fire extinguishing • Never dispense flammable material into

equipment within 5 ft / 1.5 m of dispensers. unapproved containers.

• Always use pipe sealant approved for • Never dispense fuel without a valid

gasoline service. driver’s license.

CAUTION: DO NOT ALTER OR COVER THE P/V VENT.

DO NOT OVERTIGHTEN.

Importantsafetyinstructions-savetheseinstructionsinareadilyaccessiblelocation.

WARRANTY

VAPOR PRODUCTS – Husky Corporation will, at its option, repair, replace, or credit the purchase price of any Husky®
manufactured product which proves upon examination by Husky, to be defective in material and/or workmanship for a period of one (1)
year of installation or fifteen (15) months from the manufacture date of shipment by Husky, whichever occurs first. The warranty period on
repaired or replacement vapor recovery products is only for the remainder of the warranty period of the defective product.

CONVENTIONAL PRODUCTS – Husky Corporation will, at its option, repair, replace, or credit the purchase price of any Husky
manufactured product which proves upon examination by Husky, to be defective in material and/or workmanship for a period of one (1)
year from the manufacture date of shipment by Husky.

Buyer must return the products to Husky, transportation charges prepaid. This Warranty excludes the replaceable bellows,
bellows spring assembly, spout assembly and scuff guard, unless (i) damage is obvious when the product is removed from shipping carton
and (ii) the defective product is returned to Husky prior to use. This warranty does not apply to equipment or parts which have been installed
improperly, damaged by misuse, improper operation or maintenance, or which are altered or repaired in any way.

The warranty provisions contained herein apply only to original purchasers who use the equipment for commercial or
industrial purposes. There are no other warranties of merchantability, fitness for a particular purpose, or otherwise, and any other such
warranties are hereby specifically disclaimed.

Husky assumes no liability for labor charges or other costs incurred by Buyer incidental to the service, adjustment, repair, return,
removal or replacement of products. Husky assumes no liability for any incidental, consequential, or other damages under any warranty,
express or implied, and all such liability is hereby expressly excluded.

Husky reserves the right to change or improve the design of any Husky fuel dispensing equipment without assuming any
obligations to modify any fuel dispensing equipment previously manufactured.

Husky Corporation • 2325 Husky Way • Pacific, MO 63069 • Phone: (800) 325-3558 • Fax: (636) 825-7300 • www.husky.com

Page 2 009041-13 2/2020