Diamond Tools and Machines 2018 - English

www.tyrolit.com

SPECIFIC INFORMATION 250

Example page Registered trademark
Specific information Expiry date
Special application (not
Product label available everywhere)
Shape and specification
Maximum operating speed Dimensions DxTxH
and maximum allowable in mm and inches
speed EAN code
Performance level
Application and safety
pictograms
EN safety standards
oSa safety guidelines
Type number
Material suitability

Colour codes

Label Steel 2in1/3in1 INOX Nonferrous metals Cast iron Stone
Colour code BLUE RED GREEN
Material Steel BLUE Stainless steel ORANGE PURPLE Stone

2in1 = Steel and Aluminium, copper, Cast materials
stainless steel, zinc, brass, bronze
3in1 = Steel,
Other stainless steel and
cast iron

Cutting Other

RESIN-BONDED CUT-OFF WHEELS 252

Cutting

Cut-off grinding is one of the most important processes
in the trade and industrial sectors for processing metals.
TYROLIT offers the right tool for convenient and quick use
on angle grinders as well as for petrol cutting saws.

The benefits of our cut-off wheels minimal finishing times, saving you vibration and noise considerably
in terms of innovation and economy high costs. improve your level of comfort while
can be clearly seen when it comes to However, the highest priority here at working.
cutting thin metal sheets and profiles. TYROLIT is the health of our custom- You can find the entire range of cut-
Our PREMIUM*** products in particu- ers. TYROLIT cut-off wheels therefore off wheels for every application in our
lar offer you the ultimate performance meet the highest safety standards Specialist Industry Catalogue.
and lifetimes, very clean cutting areas and contribute significantly to improv-
Other and low thermal load. This means ing your working conditions. Reduced

RESIN-BONDED CUT-OFF WHEELS 253

Application recommendation

Performance level Specification Steel Stainless steel 2in1 NF metals Rails Stone Pages

A60Q-BFP 255
A46Q-BFP 255
TA60P-BFXA 256
A30Q-BFXA 256
A60R-BFP 258
A46R-BFP 258
A46N-BFP 259
A60N-BFP 259
A30N-BFXA 260
A24Q-BF100 262

A30S-BF 254
A46R-BFS 258
A60R-BFS 258
A30R-BFS 258
C30S-BF 260
A30S-BF100 261

A46Q-BFB 256
A60Q-BFB 256
A30Q-BF 256, 257
A30Q-BFB 257
C30S-BF 261
A30S-BF100 262

Other

RESIN-BONDED CUT-OFF WHEELS 254

Cut-off wheels

For steel

This tool not only offers a cost-efficient solution for your everyday work, The tool is particularly suitable for cutting solid material. The assortment of
but also the safety standards customers have come to expect from STANDARD** cut-off wheels for steel ranges from 2.5 to 3.0 mm. It offers a
TYROLIT. This is provided by the excellent lifetime and stability of the long lifetime and is suitable for universal use.
STANDARD** cut-off wheel.

Shape Type no. Dimension Specification PU
41 367565 115x2.5x22.23 A30S-BF 25
125x2.5x22.23 A30S-BF 25
367569 178x3.0x22.23 A30S-BF 25
367578 230x3.0x22.23 A30S-BF 25
367583 115x2.5x22.23 A30S-BF 25
42 367781 125x2.5x22.23 A30S-BF 25
367786 178x3.0x22.23 A30S-BF 25
367800 230x3.0x22.23 A30S-BF 25
367803

Cut-off wheels

Super-thin 2in1 cut-off wheels for steel and stainless steel

++ Enhanced economic efficiency ++ Maximum comfort
Significant increase in lifetime while working
and cutting ability, which is par- The tool operates consistently
ticularly evident in their first-cut and without a jamming tendency,
performance. The wheel delivers producing 30 % less cutting dust.
the best results with shorter Additional sound and vibration
cutting times right from the very damping are features that make
first cut. the super-thin TYROLIT cut-off
wheels a safe and convenient tool.
++ Reduced working times
Other A low load on the workpiece
and short cutting times allow
you to quickly achieve the
best result. No supplementary
reworking, such as cleaning or
deburring.

RESIN-BONDED CUT-OFF WHEELS 255

With the next generation been developed for machining steel or a reduction in the fatigue strength,
PREMIUM*** 2in1 cut-off wheels and stainless steel. can be avoided. As well as a clear
you can enhance performance while The chemical purity makes this tool improvement in productivity, these
significantly reducing tool wear. In ideal for machining stainless steel. In cut-off wheels also promote envi-
thicknesses of 1.0 to 1.6 mm, these this way, impairments to the material, ronmentally friendly use thanks to
super-thin 2in1 cut-off wheels have such as corrosion, pitting corrosion reduced waste production.

Cut-off wheels

Super-thin 2in1 cut-off wheels for steel and stainless steel

Shape Type no. new Type no. old Dimension Specification PU
41 34332791 773268 115x1.0x22.23 A60Q-BFP 25
14082 115x1.6x22.23 A46Q-BFP 25
34332793 773269 125x1.0x22.23 A60Q-BFP 25
34332792 14085 125x1.6x22.23 A46Q-BFP 25
34332794 920351 150x1.6x22.23 A46Q-BFP 25
34332796 34165056 178x1.6x22.23 A46Q-BFP 25
34332797 920353 230x1.9x22.23 A46Q-BFP 25
34332798

Cut-off wheels

2in1 with DEEP CUT PROTECTION for steel and stainless steel

++ Enhanced safety ++ Versatile application options
The DEEP CUT PROTECTION It is ideal for small sheet metal,
metal bushing we have devel- profile and pipe cross-sections.
oped prevents the crown being Rods and metal reinforcements
removed from the wheel and can also be cut effortlessly.
thus a break out of the bore.

++ Greater economic efficiency
The longer range of application
means that wheel changes are
reduced.

Using newly developed technol- PREMIUM*** cut-off wheel with DEEP the wheel. Other
ogy and new materials we have CUT PROTECTION enables the user There is no risk of sharp workpiece
succeeded in taking another step to achieve maximum insertion depths edges removing the crown.
towards improved user safety. The into the workpiece without damaging

RESIN-BONDED CUT-OFF WHEELS 256

Cut-off wheels

2in1 with DEEP CUT PROTECTION for steel and stainless steel

Shape Type no. Dimension Specification PU
42 34042238 115x1.2x22.23 TA60P-BFXA 25
125x1.2x22.23 TA60P-BFXA 25
34042239

Cut-off wheels

2in1 for steel and stainless steel

This high-performance tool has been designed to be used on both steel The assortment of 2in1 PREMIUM*** cut-off wheels ranges from 1.6 to
and stainless steel and its standard widths offer a cost-efficient solution. 1.9 mm for quick and convenient operation with the longest lifetime, and
This is provided by the longest lifetime and stability of the PREMIUM*** from 2.5 to 3.0 mm for the longest lifetime and stability.
2in1. The tool is suitable for cutting metal sheets, profiles, pipes, rods and
solid material.

Shape Type no. Dimension Specification PU
41 872338 115x2.5x22.23 A30Q-BFXA 25
125x2.5x22.23 A30Q-BFXA 25
872339 178x2.5x22.23 A30Q-BFXA 25
872341 230x2.5x22.23 A30Q-BFXA 25
872343
115x2.5x22.23 A30Q-BFXA 25
42 872346 125x2.5x22.23 A30Q-BFXA 25
872347 178x3.0x22.23 A30Q-BFXA 25
872350 230x3.0x22.23 A30Q-BFXA 25
872351

Cut-off wheels

2in1 for steel and stainless steel

This tool is designed for use on both steel and stainless steel. Our BASIC* suitable for fast, convenient and low-burr work. The stable cut-off wheels
cut-off wheel 2in1 has an excellent lifetime and stability. The tool is suitable in thicknesses between 2.0 and 3.0 mm have a very long lifetime and are
for cutting metal sheets, profiles, pipes, rods and solid material. suitable for universal use.
The 1.6 mm cut-off wheel available in the BASIC* assortment is particularly

Shape Type no. new Type no. old Dimension Specification PU
41 34332870 34051373 115x1.0x22.23 A60Q-BFB 25
Other 222899 115x1.6x22.23 A46Q-BFB 25
34332872 34051374 125x1.0x22.23 A60Q-BFB 25
34332871 222900 125x1.6x22.23 A46Q-BFB 25
34332873 633506 178x1.6x22.23 A46Q-BFB 25
34332875 633509 230x1.9x22.23 A46Q-BFB 25
34332876 222997 115x2.5x22.23 A30Q-BF 25

RESIN-BONDED CUT-OFF WHEELS 257

Shape Type no. new Type no. old Dimension Specification PU
41 222998 125x2.5x22.23 A30Q-BF 25
291949 230x2.0x22.23 A30Q-BFB 25
34332877 223002 230x3.0x22.23 A30Q-BF 25
223021 115x2.5x22.23 A30Q-BF 25
42 223022 125x2.5x22.23 A30Q-BF 25
223023 178x3.0x22.23 A30Q-BF 25
222044 230x3.0x22.23 A30Q-BF 25

Cut-off wheels

Super-thin cut-off wheels for stainless steel

++ Enhanced economic efficiency ++ Maximum comfort
Significant increase in lifetime while working
and cutting ability, which is par- The tool operates consistently
ticularly evident in their first-cut and without a jamming tendency,
performance. The wheel delivers producing 30 % less cutting dust.
the best results with shorter Additional sound and vibration
cutting times right from the very damping are features that make
first cut. the super-thin TYROLIT cut-off
wheels a safe and convenient
++ Reduced working times tool.
A low load on the workpiece
and short cutting times allow
you to quickly achieve the
best result. No supplementary
reworking, such as cleaning or
deburring.

With the next generation PREMIUM*** for thin-walled metal sheets, profiles purity of this tool is a requirement of
cut-off wheels for stainless steel you and pipes, as well as reinforced steel. machining stainless steel in order to
can enhance performance while signif- Even for small stainless steel avoid impairments to the material,
icantly reducing tool wear. Super-thin cross-sections and rods, and corro- such as corrosion, pitting corrosion or
cut-off wheels can be obtained from sion-resistant or acid-resistant stain- a reduction in the fatigue strength.
TYROLIT in thicknesses from 0.75 to less steel these cut-off wheels offer
1.6 mm. They are particularly suitable effortless machining. The chemical Other

RESIN-BONDED CUT-OFF WHEELS 258

Cut-off wheels

Super-thin cut-off wheels for stainless steel

Shape Type no. new Type no. old Dimension Specification PU
41 34332800 610935 115x0.75x22.23 A60R-BFP 25
674471 115x1.0x22.23 A60R-BFP 25
34332802 51841 115x1.6x22.23 A46R-BFP 25
34332804 610937 125x0.75x22.23 A60R-BFP 25
34332801 674473 125x1.0x22.23 A60R-BFP 25
34332803 51844 125x1.6x22.23 A46R-BFP 25
34332805 291583 150x1.6x22.23 A46R-BFP 25
34332807 34059901 178x1.6x22.23 A46R-BFP 25
34332808 230x1.9x22.23 A46R-BFP 25
34332809

Cut-off wheels

For stainless steel

The chemical purity of this tool is a requirement of machining stainless 1.9 mm for fast, convenient and low-burr cutting. The stable cut-off wheels
steel in order to avoid impairments to the material, such as corrosion, in thicknesses between 2.0 and 2.5 mm have a very long lifetime and are
pitting corrosion or a reduction in the fatigue strength. The tool is suitable suitable for universal use.
for cutting metal sheets, profiles, pipes, rods and solid material.
The assortment of these cut-off wheels ranges from thicknesses of 1.0 to

Shape Type no. new Type no. old Dimension Specification PU
41 34332830 367562 115x1.0x22.23 A60R-BFS 25
367561 115x1.6x22.23 A46R-BFS 25
34332833 367568 125x1.0x22.23 A60R-BFS 25
34332832 367567 125x1.6x22.23 A46R-BFS 25
34332834 367576 178x1.6x22.23 A46R-BFS 25
34332891 367581 230x1.9x22.23 A46R-BFS 25
34332838 367780 230x2.0x22.23 A30R-BFS 25
34332839

Other

RESIN-BONDED CUT-OFF WHEELS 259

Cut-off wheels ++ Maximum comfort
while working
Super-thin cut-off wheels for nonferrous metals The tool operates consistently
and without a jamming tendency,
++ Enhanced economic efficiency producing 30 % less cutting dust.
Significant increase in lifetime Additional sound and vibration
and cutting ability, which is par- damping are features that make
ticularly evident in their first-cut the super-thin TYROLIT cut-off
performance. The wheel delivers wheels a safe and convenient tool.
the best results with shorter
cutting times right from the very
first cut.

++ Reduced working times
Cutting times are reduced when
used on aluminium, aluminium
bronze, aluminium base alloys,
copper, bronze, brass, nickel
silver and titanium.

The next generation of TYROLIT to cut nonferrous metals, the tool times with NF metals too.
PREMIUM*** cut-off wheels achieves must have a high cutting ability. To New specifications prevent the clog-
a better performance than other this end, TYROLIT has developed a ging and dulling of the grinding wheel
PREMIUM*** wheels, and with con- special formula and production meth- which used to be a common result of
siderably reduced tool wear. In order od in order to achieve short cutting material abrasion.

Cut-off wheels

Super-thin cut-off wheels for nonferrous metals

Shape Type no. new Type no. old Dimension Specification PU
41 34332821 840247 115x1.0x22.23 A60N-BFP 25
623553 115x1.6x22.23 A46N-BFP 25 Other
34332823 257533 125x1.0x22.23 A60N-BFP 25
34332822 739982 125x1.6x22.23 A46N-BFP 25
34332824

RESIN-BONDED CUT-OFF WHEELS 260

Cut-off wheels

For nonferrous metals

In order to cut nonferrous metals, the tool must have a high cutting ability. which used to be a common result of material abrasion.
To this end, TYROLIT has developed a special formula and production
method in order to achieve short cutting times with NF metals too.
New specifications prevent the clogging and dulling of the grinding wheel

Shape Type no. Dimension Specification PU
41 32141 178x2.5x22.23 A30N-BFXA 25
230x2.5x22.23 A30N-BFXA 25
32142

Cut-off wheels

For stone

This STANDARD** cut-off wheel reduces the work of the operator due impresses by achieving clean cutting edges and good cutting quality.
to its excellent cutting ability. When used on stone materials, the wheel Reworking is no longer required.

Shape Type no. Dimension Specification PU
41 367566 115x2.5x22.23 C30S-BF 25
125x2.5x22.23 C30S-BF 25
367572 178x3.0x22.23 C30S-BF 25
367580 230x3.0x22.23 C30S-BF 25
367585 115x2.5x22.23 C30S-BF 25
42 367782 125x2.5x22.23 C30S-BF 25
367787 178x3.0x22.23 C30S-BF 25
367801 230x3.0x22.23 C30S-BF 25
367804

Other

RESIN-BONDED CUT-OFF WHEELS 261

Cut-off wheels

For stone

The BASIC* cut-off wheel reduces the work of the operator due to its and can be used for universal applications. The advantages are topped off
good cutting ability. When used on common building materials, the wheel by its environmentally-friendly operation, thanks to the reduction in cutting
impresses by achieving clean cutting edges and good cutting quality. waste.
The BASIC* version of the 2.5 to 3.0 mm thick wheels offer a long lifetime

Shape Type no. Dimension Specification PU
41 223012 115x2.5x22.23 C30S-BF 25
125x2.5x22.23 C30S-BF 25
223015 178x3.0x22.23 C30S-BF 25
222042 230x3.0x22.23 C30S-BF 25
223019 115x2.5x22.23 C30S-BF 25
42 223025 125x2.5x22.23 C30S-BF 25
223027 178x3.0x22.23 C30S-BF 25
223029 230x3.0x22.23 C30S-BF 25
223031

Cut-off wheels

For steel

TYROLIT provides the optimal tools for use on stationary cutting machines As with all TYROLIT STANDARD** cut-off wheels, this tool has been opti-
in chop cut. This special tool is ideal for cutting workpieces with large mised to achieve excellent cutting ability and lifetime.
cross-sections, as well as solid material and profiles. The internal reinforce-
ment and rough side surfaces enable low burr cutting of workpieces.

Shape Type no. Dimension Specification PU
41H 384756 350x4.0x20 A30S-BF100 10
350x4.0x25.4 A30S-BF100 10
384758

Other

RESIN-BONDED CUT-OFF WHEELS 262

Cut-off wheels

For steel

The BASIC* cut-off wheel for steel is suitable for cutting profiles, solid Developed for use on manual cut-off machines with electric or petrol en-
material and large cross-sections due to its design with two external rein- gines. Suitable for pure off-hand and guided off-hand applications.
forcements. With the BASIC* wheel, you can achieve reduced cutting times
coupled with minimal effort.

Shape Type no. Dimension Specification PU
41H 223042 350x4.0x20 A30S-BF100 10

Cut-off wheels

For rails

This wheel has been developed specially based on specifications for cut- Exceptionally clean, non-discoloured surfaces reduce reworking tasks
ting rails. Despite extreme application conditions, such as humidity, cold and working times. Developed for use on manual cut-off machines with
and temperature fluctuations, the rail cut-off wheel from TYROLIT offers electric or petrol engines. Suitable for pure off-hand and guided off-hand
short cutting times coupled with minimal effort. applications.

Shape Type no. Dimension Specification PU
41H 671108 350x3.8x25.4 A24Q-BF100 10
400x4.3x25.4 A24Q-BF100 10
676428

Other

Grinding Other

RESIN-BONDED GRINDING WHEELS 264

Grinding

TYROLIT also offers a wide selection of resin-bonded
grinding tools. For example, our high-performance rough
grinding wheels deliver the best results in both standard and
special applications. Continuous developments, such as the
introduction of the “Comfort Start” edge, with which every
user can achieve optimum results right from the start, make
our rough grinding wheels among the most advanced tools in
the sector.

TYROLIT also developed the RON- You can also achieve high stock re- You can find the entire range of rough
DELLER® for use on angle grinders. moval rates and lifetimes with them. grinding wheels, mounted points,
Its unique geometry and stud pattern In addition to the wide selection of res- milling cutters, wire brushes and
enable outstanding chip transport, in-bonded abrasives, you will also find coated abrasives in our Specialist
cool, material-protecting grinding and various coated abrasives such as flap Industry Catalogue.
ergonomic working. For use on large discs, rough cleaning wheels, etc. in the
Other and heavy components, we recom- TYROLIT range. Whatever the applica-
mend working with cup wheels as they tion and whichever shape you prefer:
are exceptionally robust and durable. we have the right product for you.

RESIN-BONDED GRINDING WHEELS 265

Application recommendation

Performance level Specification Steel Stainless steel 2in1 Stone Plastic All In One Pages

A24Q-BFX 266
ZA24S-BFX 267
A36Q-BF 269
C36S-BF 270
C60S-BF 270
C100S-BF 270
1C16L4B2 271
1C60J4B2 271
ZA40-B 272, 273
ZA60-B 272, 273
ZA80-B 272, 273
28 VL GR 275

A24S-BF 267
A30R-BFINOX 268
C30S-BF 268
C16J-B 271
C60J-B 271
ZA120-B 273, 274
ZA40-B 273, 274
ZA60-B 273, 274
ZA80-B 273, 274

A30Q-BF 267
C30S-BF 268
ZA40-B 274
ZA60-B 274
ZA80-B 274
A-B01 C JX 275

Other

RESIN-BONDED GRINDING WHEELS 266

Rough grinding wheel Rough grinding wheel
with and without
2in1 for steel and stainless steel “Comfort Start”.

++ Enhanced economic efficiency TYROLIT film
High abrasiveness coupled with The product film can be
a significantly longer lifetime. found on YouTube at
www.youtube.com/
++ Less work required TYROLITgroup
The destruction of the work-
piece as a result of plunging ++ Enhanced comfort while working
with the tool is prevented, thus With the “Comfort Start” function,
avoiding rework. plunging into the workpiece is
prevented, thus making the start
of the process simpler and more
convenient.

This rough grinding wheel is particu- minimal effort. This is made possible defined edge of the tool. With the
larly suitable for steel and stainless by a new bond with coarser grain and “Comfort Start” edge, the user can
steel applications. Due to its softer a new layer composition. achieve a pleasant start to grinding
design, the PREMIUM*** 2in1 is quick What makes our 2in1 rough grinding and the level of comfort while working
and convenient to use and requires wheel so unique is the bevelled and is increased many times over.

Rough grinding wheel

2in1 for steel and stainless steel

Shape Type no. Dimension Specification PU
27 34046120* 115x7.0x22.23 A24Q-BFX 10
125x7.0x22.23 A24Q-BFX 10
34046131* 178x7.0x22.23 A24Q-BFX 10
34046133* 230x7.0x22.23 A24Q-BFX 10
34046134*

* With Comfort Start edge

Other

RESIN-BONDED GRINDING WHEELS 267

Rough grinding wheel

2in1 for steel and stainless steel

This rough grinding wheel is particularly suitable for steel and stainless This tool can be used universally and is equally suitable for surface and
steel applications due to its softer design. In addition, the BASIC* 2in1 is edge grinding applications.
quick and convenient to use and requires minimal effort.

Shape Type no. Dimension Specification PU
* With Comfort Start edge 27 222858* 115x6.0x22.23 A30Q-BF 10
125x6.0x22.23 A30Q-BF 10
222860* 178x6.0x22.23 A30Q-BF 10
222863* 230x6.0x22.23 A30Q-BF 10
222865*

Rough grinding wheel

LONGLIFE for steel

The PREMIUM*** Longlife is a high-performance rough grinding wheel for The 7, 8 and 10 mm thick Longlife rough grinding wheels offer enhanced
surface and edge grinding. The 4 mm thick rough grinding wheel achieves dimensional stability for welding and root welding.
the highest stock removal rates, such as required PIPELINE construction
applications.

Shape Type no. Dimension Specification PU
27 34353683* 115x7.0x22.23 ZA24S-BFX 10
125x7.0x22.23 ZA24S-BFX 10
34353684* 178x7.0x22.23 ZA24S-BFX 10
34353687* 230x7.0x22.23 ZA24S-BFX 10
34353689*

* With Comfort Start edge

Rough grinding wheel

For steel

The STANDARD** rough grinding wheel is a powerful rough grinding wheel Even with low pressure, the wheel is abrasive and easy to handle.
for surface and edage grinding. The tool boasts optimised cutting ability
and a long lifetime.

Shape Type no. Dimension Specification PU
27 367377* 115x6.0x22.23 A24S-BF 10
125x6.0x22.23 A24S-BF 10
367771* 178x6.0x22.23 A24S-BF 10
367773* 230x6.0x22.23 A24S-BF 10
367775*

* With Comfort Start edge

Other

RESIN-BONDED GRINDING WHEELS 268

Rough grinding wheel

For stainless steel

The powerful rough grinding wheel has been specially designed for This is achieved through the use of regular aluminium oxide. This rough
stainless steel applications. The STANDARD** INOX rough grinding wheel grinding wheel is specially designed for stainless steel applications.
combines a long lifetime and the best cutting ability.

Shape Type no. Dimension Specification PU
27 367545* 115x6.0x22.23 A30R-BFINOX 10
125x6.0x22.23 A30R-BFINOX 10
367548* 178x6.0x22.23 A30R-BFINOX 10
367551* 230x6.0x22.23 A30R-BFINOX 10
367554*

* With Comfort Start edge

Rough grinding wheel

For stone

The abrasive STANDARD** rough grinding wheel for stone is quick and This rough grinding wheel with silicon carbide is specifically for stone and
convenient to use and requires minimal exertion. It is ideal for soft to hard short-chipping materials.
stone, natural and artificial stone and concrete.

Shape Type no. Dimension Specification PU
27 367546* 115x6.0x22.23 C30S-BF 10
125x6.0x22.23 C30S-BF 10
367549* 178x6.0x22.23 C30S-BF 10
367552* 230x6.0x22.23 C30S-BF 10
367557*

* With Comfort Start edge

Rough grinding wheel

For stone

The abrasive BASIC* rough grinding wheel for stone is quick and conven- This rough grinding wheel with silicon carbide is specifically for stone and
ient to use and requires minimal exertion. It is ideal for soft to hard stone, short-chipping materials.
natural and artificial stone and concrete.

Shape Type no. Dimension Specification PU
27 222873* 115x6.0x22.23 C30S-BF 10
125x6.0x22.23 C30S-BF 10
222889* 178x6.0x22.23 C30S-BF 10
222043* 230x6.0x22.23 C30S-BF 10
222898*

* With Comfort Start edge

Other

RESIN-BONDED GRINDING WHEELS 269

RONDELLER® ++ Universal use
Ideal for use on steel and
2in1 for steel and stainless steel stainless steel, as well as
for all grinding, deburring
++ High level of comfort and shaping applications
while working on curved surfaces.
These tools make vibra-
tion-free, ergonomic use
possible and protect both
user and machine.

++ Simple handling
Easy assembly - no need
to use special accessories,
such as back up pads and
clamping nuts.

The TYROLIT PREMIUM*** RON- geometry of the RONDELLER® ena- optimal adaptation to the workpiece
DELLER® combines the product bles cool, ergonomic grinding that is for all grinding, deburring and shap-
advantages of different grinding tools kind to materials. ing applications means that curved
with the easiest handling. The unique Absolutely vibration-free use and surfaces can be perfectly machined.

RONDELLER®

2in1 for steel and stainless steel

Shape Type no. Dimension Specification PU
908225 115x22.23 A36Q-BF 25
29RON 908227 125x22.23 A36Q-BF 25
908230 178x22.23 A36Q-BF 25

Other

RESIN-BONDED GRINDING WHEELS 270

RONDELLER®

For stone

The TYROLIT PREMIUM*** Ronderller® combines the product advantages Absolutely vibration-free use and optimal adaptation to the workpiece for
of different grinding tools with the easiest handling. The unique geome- all grinding jobs means that curved surfaces can be perfectly machined.
try and stud pattern of the Ronderller® enables ergonomic grinding that
protects materials.

Shape Type no. Dimension Specification PU
908233 115x22.23 C36S-BF 25
29RON 908220 178x22.23 C36S-BF 25
908221 178x22.23 C60S-BF 25
908223 178x22.23 C100S-BF 25

Other

RESIN-BONDED GRINDING WHEELS 271

Resin cup wheel

For stone

Cup wheels achieve maximum stock removal rates and lifetime for There is a choice of bore design 22.23 and thread design M14 for fitting
grinding jobs on large areas. The stone cup wheel is particularly suitable to the tool. Observe operating speed: max. 50 m / s.
for pre-grinding imperfections on concrete surfaces, bevelling and
pre-grinding artificial stone and patio slabs, surface grinding on marble,
slate and granite.

Shape Type no. Dimension Specification PU Max. speed
310992 110/90x55xM14 1C16L4B2 2 8 680
11ZB 321211 110/90x55xM14 1C60J4B2 2 8 680

Resin cup wheel

For stone

Cup wheels achieve excellent stock removal rates and lifetime for grind- There is a choice of bore design 22.23 and thread design M14 for fitting
ing jobs on large areas. The stone cup wheel is particularly suitable for to the tool. Observe operating speed: max. 50 m / s.
pre-grinding imperfections on concrete surfaces, bevelling and pre-grind-
ing artificial stone and patio slabs, surface grinding on marble, slate and
granite.

Shape Type no. Dimension Specification PU Max. speed
895676 110/90x55xM14 C16J-B 2 8 680
11ZB 895677 110/90x55xM14 C60J-B 2 8 680

Other

RESIN-BONDED GRINDING WHEELS 272

Flap disc

2in1 for steel and stainless steel

The PREMIUM*** 2in1 flap disc combines an excellent lifetime with very steels. Problem-free welding as well as edge and surface grinding, particu-
high specific abrasion. The TYROLIT 2in1 flap disc is used both on high larly when used on powerful angle grinders.
alloyed steels and stainless steel, as well as on unalloyed and low alloyed

Shape Type no. Dimension Specification PU
27A 668642 115x22.23 ZA40-B 10
115x22.23 ZA60-B 10
668644 115x22.23 ZA80-B 10
668649 125x22.23 ZA40-B 10
668663 125x22.23 ZA60-B 10
668664 125x22.23 ZA80-B 10
668665

Flap disc ++ 100 % wheel usage
The LONGLIFE C-TRIM
LONGLIFE C-TRIM for steel and stainless steel has a unique plastic
backing that can be easily
++ Longest lifetime trimmed. This unique fea-
The PREMIUM*** ture allows for 100 % utlit-
LONGLIFE C-TRIM offers sation of the disc. The disc
the longest lifetime with remains sharp through its
consistent abrasiveness lifetime and can be used
and performance. on a wide range of steels.

++ Robust construction
Through the increased
number of closely spaced
flaps, this disc can with-
stand even the highest
loads.

The PREMIUM*** LONGLIFE C-TRIM The LONGLIFE C-TRIM can be used construction guarantees a long life
offers through its’new construction on high alloyed steels, stainless even when deburring sharp edges
excellent stock removal and remains steels, unalloyed and low-alloyed and thin materials.
sharp throughout its lifetime. The steels. The disc makes for easy weld
Other backing of the disc can be trimmed processingas well as for edge and
to give 100 % utilisation of the entire surface grinding. Optimal results can
disc, which affords unbeatable value be achieved when used with pow-
in terms of longevity. erful angle grinders. The compact

RESIN-BONDED GRINDING WHEELS 273

Flap disc

LONGLIFE C-TRIM for steel and stainless steel

Shape Type no. Dimension Specification PU
28N 34239191 115x22.23 ZA40-B 10
115x22.23 ZA60-B 10
34239192 115x22.23 ZA80-B 10
34239193 125x22.23 ZA40-B 10
34239195 125x22.23 ZA60-B 10
34239196 125x22.23 ZA80-B 10
34239197

Flap disc

2in1 for steel and stainless steel

The STANDARD** 2in1 flap disc offers two advantages. On one hand it The TYROLIT 2in1 flap disc is used both on high alloyed steels and stain-
offers the user very long lifetime, on the other it guarantees very good less steel, as well as on unalloyed and low alloyed steels.
specific abrasion.

Shape Type no. Dimension Specification PU
27A 572473 115x22.23 ZA40-B 10
115x22.23 ZA60-B 10
454393 115x22.23 ZA80-B 10
455312 115x22.23 ZA120-B 10
50801 125x22.23 ZA40-B 10
824385 125x22.23 ZA60-B 10
455303 125x22.23 ZA80-B 10
458587 125x22.23 ZA120-B 10
243069 115x22.23 ZA40-B 10
28A 537021 115x22.23 ZA60-B 10
537084 115x22.23 ZA80-B 10
537089 115x22.23 ZA120-B 10
537093

Other

RESIN-BONDED GRINDING WHEELS 274

SOFTJOB

2in1 for steel and stainless steel

For us, the STANDARD** SOFTJOB flap disc represents maximum flexibility Processing of contours and profiled surfaces, processing of handrails and
for machining difficult to access areas. It has a broad application area, pipes, cleaning of surfaces, removal of rust and paint residues.
comprising: Surface preparation and improvement, preparation of welding
work and cleaning of weld seams.

Shape Type no. Dimension Specification PU
28S 246987 115x22.23 ZA40-B 10
115x22.23 ZA60-B 10
246988 115x22.23 ZA80-B 10
246990 115x22.23 ZA120-B 10
246994 125x22.23 ZA40-B 10
246995 125x22.23 ZA60-B 10
246996 125x22.23 ZA80-B 10
246998 125x22.23 ZA120-B 10
247001

Flap disc

2in1 for steel and stainless steel

The BASIC* 2in1 flap disc offers good specific removal. Thanks to a new The TYROLIT 2in1 flap disc is used both on high alloyed steels and stain-
upgrade, the BASIC* flap disc achieves an unprecedented lifetime and less steel, as well as on unalloyed and low alloyed steels.
30 % more power.

Shape Type no. Dimension Specification PU
27A 34318364 115x22.23 ZA40-B 10
115x22.23 ZA60-B 10
34318365 115x22.23 ZA80-B 10
34318366 125x22.23 ZA40-B 10
34318369 125x22.23 ZA60-B 10
34318370 125x22.23 ZA80-B 10
34318391 115x22.23 ZA40-B 10
28A 34318539 115x22.23 ZA60-B 10
34318551 115x22.23 ZA80-B 10
34318552

Other

RESIN-BONDED GRINDING WHEELS 275

Rough cleaning wheel

Universal use

With the TYROLIT rough cleaning wheel you can effortlessly remove rust, This wheel offers the user quiet, non-strenuous grinding combined with low
paint, lacquer and underbody sealant from your workpiece. The porous generation of heat.
nylon fibres, treated with aggressive abrasives, meet any challenge. At the
same time, they prevent clogging or loading of the wheel.

Shape Type no. Dimension Design Colour PU Max. RPM Rec. speed

28 VL GR 898014 115x22.23 C COARSE BLACK 5 11 000 8 600
898017 7 800
125x22.23 C COARSE BLACK 5 9 800

34206236 115x22.2 A EX. COARSE BLUE 5 11 000 8 600
34206237 125x22.2 A EX. COARSE BLUE 5 9 800 7 800

A-B01 C JX cloth rolls

Universal use

With flexible cloth rolls from TYROLIT you can machine almost any mate- For finishing coatings, smoothing and cleaning composites, and for clean
rial. When finishing surfaces, preparation either by hand or using an orbital intermediate grinding, we recommend cloth rolls on an orbital sander.
sander is required. When machining wood, paint and lacquer, TYROLIT
recommends BASIC* cloth rolls for hand-guided grinding.

Shape Type no. Dimension Grain PU
Roll 705877 50x25M 120 1

Other



Notes Other

SAFETY 278

Safety

Safety and the brand Assembly / repair
TYROLIT

Our aim was and is to make our Diamond tools must be visually Flanges should be clean, flat, of equal
products even safer for our users: inspected for cracks or other possible size and of the proper type for the
damage before mounting. diamond tool. Don’t use damaged
Through our work as the founder Don’t use damaged diamond tools! flanges.
member of the “Organisation for the
Safety of Abrasives” (oSa®), through The dimension of the diamond tool The diamond tool must be properly
close cooperation with the safety must correspond to the information mounted, rotate freely and the flanges
authorities and through practical on the machine and shouldn’t exceed must be tightended properly.
communication with our users all over those. Never force a wheel onto the ma-
the world. chine.
Make sure that the maximum oper-
For safe working with grinding ating speed (RPM) of the tool is not Only use machines with suitable
tools, it is necessary that exceeded. blade guards.

–– machine manufacturer Please note when mounting, that the Disconnect the machine from its
arrow on the diamond tool corre- power supply before mounting or
–– abrasive manufacturer and sponds with the direction of rotation removing a diamond tool.
of the machine.
–– operator Have your machine repaired solely
Make sure the bore of the diamond by qualified personnel using original
contribute their part in equal meas- tool fits the machine spindle properly spare parts.
ure. TYROLIT guarantees that all tools – the bore must not be manipulated.
meet the requirements of the oSa®
and the European standards. The CE Make sure that the machine spindle
marking of our machines guarantees is clean and intact. An out of round
the complete compliance with the condition will cause damage to the
applicable EU safety requirements. blade and the saw.

TYROLIT strongly recommends not
to use grinding tools, which do not
have the symbols oSa®, EN13236
(diamond tools), EN12413 (cutting
and grinding wheels) or EN13743
(flap discs).

Other

SAFETY 279

Application

Avoid unintentional starting of the Ensure adequate ventilation and Never attempt to remove the wheel
machine. Make sure that the machine protective measures that correspond from the cut while the wheel is in mo-
is switched off before connecting to to the material to be machined when tion otherwise kickback may occur.
power supply. working with cutting and rough grind- Do not restart the cutting operation
ing wheels. in the workpiece. Let the wheel reach
Secure the workpiece to prevent full speed before you re-enter the cut.
accidental slipping. Maintain a firm grip on the machine
and keep balance at all times. Bring After turning off the machine, allow
Support plates or large workpieces your body into a position where you the wheel to come to rest naturally.
in order to reduce the risk of wheel can intercept kickback forces. Never use an “artificial” brake such as
pinching and kickback. soil, wood pallets or shoes and never
Large workpieces tend to sag under Do not position your head in line with lay the machine down before the
their own weight. the rotating wheel. Do not position wheel has come to rest. The rotating
your body in the area in which the wheel may grab the surface.
Always wear personal safety equi- machine will move in case of a kick-
pement and eye protection. Wearing back.
personal safety equipement, such as
gloves, non-slip safety shoes, helmet If the cutting wheel gets jamed or
and ear protection, always depending when interrupting a cut for any rea-
on nature and purpose of the tool, son, turn off the machine and hold
may reduce the risk of injury. the machine motionless until the
wheel comes to a complete stop.

Safety information Use dust mask Only permitted for Not permitted for
wet grinding side grinding
Use gloves Personal safety
Use eye protection Not permitted for No freehand work
Use ear protection Pay attention to the safety wet grinding
recommendations Other
Do not use damaged
wheels

SAFETY 280

Recommended RPM

Revolutions per minute [RPM] depending on the external tool diameter [D] and the operating speed [VS]

Recommended operating speed VS in m / s

Drilling Sawing Dry-cutting

D in mm 2 3 40 50 60 80 100
14
16 2 730 4 090
20
25 2 390 3 580
32
42 1 910 2 860
52
62 1 530 2 290
72
82 1 190 1 790
100
115 910 1 360
125
150 730 1 100
180
200 620 920
230
250 530 800
300
350 470 700
400
450 380 570 7 640 9 550 11 460 15 280 19 100
500
600 330 500 6 640 8 300 9 960 13 290 16 610
700
800 310 460 6 110 7 640 9 170 12 220 15 280
900
1 000 250 380 5 090 6 370 7 640 10 190 12 730
1 200
210 320 4 240 5 310 6 370 8 490 10 610

190 290 3 820 4 770 5 730 7 640 9 550

170 250 3 320 4 150 4 980 6 640 8 300

150 230 3 060 3 820 4 580 6 110 7 640

130 190 2 550 3 180 3 820 5 090 6 370

110 160 2 180 2 730 3 270 4 370 5 460

100 140 1 910 2 390 2 860 3 820 4 770

80 130 1 700 2 120 2 550 3 400 4 240

80 110 1 530 1 910 2 290

60 100 1 270 1 590 1 910

50 80 1 090 1 360 1 640

50 70 950 1 190 1 430

40 60 850 1 060 1 270

40 60 760 950 1 150

30 50 640 800 950

Other

SAFETY 281

Trouble-shooting
Wet core drill

1. Excessive wear 3. Broken segments –– Re-sharpen the drill bit by drilling
of diamond segments into soft, abrasive material or use a
–– In case of brazed segments, a TYROLIT sharpening plate.
–– Insufficient coolant supply. Adjust short interruption of the cooling can
the water supply and / or check the lead to overheating and thus to a –– The operating speed is too high.
water lines. destruction of the soldered joint. Reduce the RPM.

–– The operating speed of the core –– The core drill has struck multiple –– The grinding pressure is too low.
drill is too low. Increase the RPM times against reinforcements or Increase the pressure.
(see RPM recommendations). fragments. Remove all loose steel
and segment parts before introduc- –– The engine power is too low.
–– The engine power is too high. ing a new core drill. Match the motor power to the
Match the motor power to the drilling diameter.
drilling diameter. –– The core drill is cutting into loose
reinforcement. Reduce the RPM –– Excessive coolant supply, only
–– The machine is vibrating. Fix the when drilling reinforcements in clear water is coming out of the
drill rig and / or check the general order to avoid damage to the core drill hole (no slurry). Reduce the
state of the machine (e.g. bearings drill. coolant supply and check the con-
and rollers). sistency (should be milky/cloudy).
4. Drill bit does not drill
–– The selected core drill may not –– The material may be too hard for
be suitable for the material being Segments are overloaded the used specification. Use a soft-
drilled, or the material is too abra- er specification
sive. Use a harder specification Flat segment surface, possible defor- (e.g. CDL - CDM).
(e.g. CDL - CDM). mation of the segments, high number
of pull-outs (>50 %), drill chatters 6. The core drill is jammed
2. Excessive wear
of the steel tube –– The operating speed is too low. –– Debris is blocked between the
Increase the RPM. core and the tube wall (steel, piec-
–– The machine is vibrating. Fix the es of material). Remove the drill rig
drill rig and / or check the general –– The grinding pressure is too high. and, using a wrench, turn the core
state of the machine (e.g. bearings Reduce the pressure. drill alternately in both directions
and rollers) . until it can be removed. Take the
–– The material may be too soft and debris out of the drill hole before
–– The core drill is warped / is not abrasive for the used specification. introducing a new core drill.
running true. Use a harder specification (e.g.
CDL - CDM). –– The drill rig was not fixed correctly
–– The core drill is not fixed properly. and has moved during drilling.
Check if the core drill is aligned 5. Drill bit does not drill Drill rig and core drill are no longer
with the motor spindle. aligned. Align and re-fix the drill rig.
Segments are underchallenged
–– There are remains in the hole,
which have not been removed by Smooth segment surface, polished
the coolant. Increase the coolant diamonds (shining, no sharp edges)
supply temporarily.
–– The diamond segments are
–– You are drilling in loose material smooth (polished).
(e.g. gravel).

Other

SAFETY 282

Trouble-shooting
Diamond saw blade

1. Excessive wear 3. The blade does not cut On a regular basis, release the
pressure on the diamond blade
–– The saw blade is not suitable for –– The saw blade is too hard for the and allow it to rotate freely for
the material being cut. Use a hard- material being cut. Check if the cooling in the air. Do not use
er specification. specification is appropriate. A excessive pressure – the weight of
glazed blade can be sharpened by the machine is sufficient.
–– Insufficient water supply. Adjust cutting into soft, abrasive material.
the water supply and / or check the 5. Loss of blade segment
water lines. –– The output power of the machine
is insufficient to permit the blade –– The machine was not held firmly or
–– The blade is pounding, which ac- to cut properly. Make sure that the the material was not fixed, which
celerates the wearing. The reasons specification is appropriate for the caused the blade to twist or jam in
could be poor bearings, a worn machine power and the material the cut. Secure the material firmly
spindle shaft or the use of a too being cut. Repeatedly check the while cutting and and maintain a
hard specification for the material tension of the V-belt in order to firm grip on the machine.
being cut. Check the state of the guarantee an optimal transmission
machine or use a softer specifica- of power. –– The blade is too hard for the
tion. material being cut which causes
–– The speed is too high. To redu- the blade to chatter. Use a softer
–– The operating speed (RPM) is too ceThe speed. Should theSpeed specification.
low. Use the correct RPM for the can not be changedcan perform
diameter of the blade (see RPM the cut inseveral deliveries. –– The blade has been undercut.
recommendations). Make sure that there is sufficient
–– The blade is not mounted correct- water supply and do not cut into
2. Undercutting ly. Look for the correct oneDi- the base layer of the pavement
rection of the saw (direction of (gravel).
Undercutting is a condition in which rotation arrow).
the steel center wears faster than the –– In case of brazed segments, a
diamond segment, especially in the 4. Overheating short interruption of the cooling
areas where the segment and core can lead to overheating and thus
are joined. This is caused by highly Overheating may lead to several to a destruction of the soldered
abrasive material grinding against the problems like loss of core tension, joint.
blade during the sawing operation. cracks in the steel core and segment
Finally this can lead to segment loss. loss (in case of brazed segments). –– The saw has not been mounted
Overheating can be identified by a correctly and starts to chatter.
–– Be sure to have sufficient water discoloration (blue and / or black oxi-
supply. Only with sufficient water dation) of the blade or the segments. Caution! For safety reasons, do not
the abrasive grinding slurry will use the saw blade any longer!
be transported out of the contact –– Make sure that wet-cutting saws
Other zone and will thus reduce the have a sufficient water supply.
undercutting effect. Check the water lines and make
sure flow is adequate on both
–– Do not cut into the sub base of the sides of blade.
pavement (lose gravel or sand).
The loose material scrubs strongly –– An excessive cutting pressure
on the body and tips it below the leads to overheating of dry-cut-
segments. ting tools. Use several passes of
2 to 5 cm deep for cutting solid
Caution! For safety reasons, do not materials.
use the saw blade any longer!

SAFETY 283

6. Cracks in the segment –– The saw blade is irregularly worn 10. Damaged bore
due to defective bearings, a
–– The saw blade is too hard for the damaged blade bore or machine –– The flanges or the spindle are
material being cut; the saw blade spindle. Exchange or repair the worn out. Check the flanges and
starts to chatter during cutting. bearings and / or spindle. Ensure spindle for wearing and replace
Use a softer specification. the engine runs smoothly and the worn parts.
does not cause the blade to chat-
–– Insufficient cooling supply (over- ter on a regular cycle basis. –– The saw blade has not been
heating). Adjust the water supply mounted properly. Ensure that the
and / or check the water lines. –– The cut is not straight which re- blade is mounted on the proper
sults in friction and heat. Properly diameter of spindle.Fix the wheel
7. Cracks in the steel core align the machine and do not exert flanges properly (with a wrench,
excessive side pressure on the not by hand). Do not remove the
–– The saw blade is too hard for the handles as a method of steering. drive pins, because they guarantee
material being cut. Use a softer Check the alignment of the drive an optimal transmission of power.
specification. shaft.
Send the saw blade back to the man-
–– Excessive cutting pressure. 9. Loss of tension ufacturer for repair.
Extreme strain on the blade can
create material fatigue, which can –– Blade has been overheated. Make
then lead to a fracture in the steel sure that wet-cutting saws have
core. sufficient water cooling.

–– The saw blade is chattering. –– The saw blade is too hard for this
Check the state of the machine application. The reason for the
(e.g. spindle and bearings) and the loss of tension is a high lateral
mounting of the saw blade. friction.

–– The cut is not straight which re- –– Check if the correct RPM has been
sults in friction and heat. Properly chosen and if the proper flanges
align the machine and do not exert are being used.
excessive side pressure on the
handles as a method of steering. –– Ensure that the saw blade has
Check the alignment of the drive been fixed correctly on the spin-
shaft. dle. Make sure that drive pins are
used for all machines.
Caution! For safety reasons, do not
use the saw blade any longer! –– The cut is not straight which re-
sults in tension and heat. Properly
8. Uneven segment wear align the machine and do not exert
excessive side pressure on the
–– Make sure that wet-cutting saws handles as a method of steering.
have a sufficient water supply. Check the alignment of the drive
Check the water lines and make shaft.
sure flow is adequate on both
sides of blade. In case of loss of tension send the
saw blade back to the manufacturer
for repair. Other

POS 284

Working together successfully

We regard our customers as partners. The success of our
customers lies in the quality of our products, our knowledge
in application technology and the provision of customer-
specific on-site solutions. Close collaboration with our
customers leads to remarkable strategic developments
and ensures long-term success for both parties.

Promotion as a key factor

For choosing the right tool, the TYROLIT POS system offers complete support.
Clear colour guidance systems, pictograms easy to understand and applica-
tion advices: a flexible and easy to use presentation medium, optionally as
Wall Display, Floor Display or Counter Display.
By request we also undertake the planing of your product assortment based
on your customers’ requirements and advise you on the optimum promotional
positioning.

Wall saws for the
highest demands

DIAMOND WIRE WSE 2226
Gesintertes Seil für große Schnittflächen in wenig bis mittelstark armierten Beton
Developed for the most exacting of construction site requirements, with
an as yet unparalleled depth of cut of up to 1 metre. The pioneering P2®
drive concept combines maximum reliability and optimum performance
with reduced service costs. For the best results for your application we
recommend the use of TYROLIT wall saw blades in TGD® technology.
Premium grinding tools since 1919
www.tyrolit.com

Poster

Other TGD® – TYROLIT GRAIN DISTRIBUTION
LANGLEBIG. SCHNITTIG. EFFIZIENT.
Beach-Flag
Premium-Schleifwerkzeuge seit 1919
www.tyrolit.com

Leaflets

Roll-Up

POS 285

Wall Display

Other

Floor Display Counter Display



TYROLIT addresses Other

GENERAL 288

TYROLIT addresses

AT TYROLIT CONSTRUCTION Tel: +43 5242 606-0
PRODUCTS GMBH Fax: +43 5242 63398
TT Swarovskistrasse 33 [email protected]
US CA 6130 Schwaz www.tyrolit.com
GR Austria
ZA Tel: +43 5242 606-0
PA TYROLIT SCHLEIFMITTELWERKE K.G. Fax: +43 5242 63398
BE Swarovskistrasse 33 [email protected]
NL 6130 Schwaz www.tyrolit.com
Austria
Other Tel: +868-6526900
ALLIED INDUSTRIAL SUPPLIES Fax: +868-652-6901
COMPANY LTD. [email protected]
# 2-12 Prince Charles Street [email protected]
San Fernando [email protected]
Trinidad and Tobago
Tel: 1 440 323 46 16
DIAMOND PRODUCTS LLC Fax: 1 440 323 86 89
333 Prospect St. [email protected]
P.O. Box 1080 www.diamondproducts.com
44035-6121 Elyria, Ohio
United States Tel: +30 210 3455473
Fax: +30 210 3412352
T. I. RAPTOPOULOS & SIA O.E. E-mail: [email protected]
Spirou Patsi 73 Site: www.raptopoulos.gr
Votanikos - Athens
T.K. 118 55 Tel: +27 11 271 6400
Greece Fax: +27 11 271 6464
[email protected]
GRINDING TECHNIQUES www.grindtech.com
28 Van Eck Street
Chamdor Tel: +507-2401475
Krugersdorp [email protected]
South Africa www.interglobepanama.com

INTERGLOBE TRADING Tel: +32 2 556 08 00
Bayside Center Coronado, Unit 17 Fax: +32 2 521 62 04
Coronado [email protected]
Panama www.tyrolit.com

N.V. TYROLIT BELGIUM S.A. Tel: 0900 653 14 34
Verwelkomingsstraat 17 Fax: +32 2 521 62 04
1070 Bruxelles [email protected]
Belgium www.tyrolit.com

TYROLIT B.V.
Postbus 2198
1500 GD Zaandam
Netherlands

GENERAL 289

SR SLIMBOUW Tel: +597-8575931
IL Rode Palmstraat 1 [email protected]
AU NZ Paramaribo www.slimbouw.com
DK FO Suriname
NO Tel: +972-523105105
IS SE TENEGAL AGENCIES [email protected]
52A Hamasger Street www.tenegal.com
AR EC CL PE DO IL-61573 Tel-Aviv
BO PY CO UY VE Israel Tel: +61 2 9316 6600
EE Fax: 1300 235689
TYROLIT AUSTRALIA PTY LTD. [email protected]
ME RU BA CZ RS 9 Tarlington Place I Smithfield www.tyrolit.com
HR SI BG RO SK NSW 2164
Australia Tel: +45 43 55 74 00
Fax: +45 43 55 74 60
TYROLIT A/S [email protected]
Hestedostervej 21, 2. Sal, www.tyrolit.com
2600, Glostrup
Denmark Tel: +47 975 47 990
[email protected]
TYROLIT AS www.tyrolit.com
Rosenborgveien 9
1630 Gamle Fredrikstad Tel: +46 8 544 715 00
Norway Fax: +46 8 544 715 01
[email protected]
TYROLIT A/B www.tyrolit.com
c/o Tyrolit AB
Enhagsslingan 4 /Box 533 Tel: +54 11 5543-2200
183 25 Täby Fax: +54 11 5543-2232
Sweden [email protected]
www.tyrolit.com.ar
TYROLIT ARGENTINA S.A.
Cnel. Manuel E. Arias 3751-17th floor Tel: +37 2 6066 841
C1430CRG Buenos Aires Fax: +37 2 6066 842
Argentina [email protected]
www.tyrolit.com
TYROLIT BALTICS OÜ
Läike tee 2/5 Tel: +420 326 766 111
75312 Peetri küla, Rae vald, Fax: +420 326 766 105
Harjumaa [email protected]
Estonia www.tyrolit.com

TYROLIT CEE K.S.
Tovární 363
294 71 Benátky nad Jizerou
Czech Republic

Other

GENERAL 290

BR TYROLIT DO BRASIL LTDA. Tel: +55 11 45298 70 0
DE Rod. D. Gabriel Paulino Bueno Couto, Fax: +55 11 45297 25 7
CH Km 81, 13315-970 Cabreúva [email protected]
Sao Paolo www.tyrolit.com.br
HU Brazil
PT Tel: +49 81 41 393-0
IE UK TYROLIT GMBH Fax: +49 81 41 393-100
EG BD LB NG IR PK KE Frauenstrasse 38 [email protected]
BT NP ZA IQ QA LY IN 82216 Maisach www.tyrolit.de
Germany Tel. +41 62 285 10 10
Fax. +41 62 285 10 20
NESTAG DIAMANT- & [email protected]
SCHLEIFTECHNIK AG www.tyrolit.com
Industriegebiet Matten
4458 Eptingen Tel. +41 26 460 84 80
Switzerland Fax + 4126 460 84 88

Rte André Piller 33E Tel. +41 44 952 18 51
1762 Givisiez Fax +41 44 952 18 19
Switzerland
Tel: +361 237 14 80
Witzbergstrasse 18 Fax: +361 237 14 89
8330 Pfäffikon ZH [email protected]
Switzerland www.tyrolit.com
Tel: +351 252 859 390
TYROLIT KFT. Fax: +351 252 859 361
Fáy U.4. [email protected]
1139 Budapest www.tyrolit.com.pt
Hungary Tel: +44 845 6868 200
Fax: +44 1788 823089
TYROLIT LDA. [email protected]
Zona Industrial do Alto da Cruz www.tyrolit.co.uk
4780 Santo Tirso Tel: +971 4 813 9111
Portugal Fax: +971 4 813 9100
[email protected]
TYROLIT LTD. www.tyrolit.com
Eldon Close, Crick
Northants NN6 7UD Tel: +46 8 544 715 00
United Kingdom Fax: +46 8 544 715 01
[email protected]
TYROLIT MIDDLE EAST FZE www.tyrolit.com
P.O. Box 17842
Jebel Ali Free Zone
Dubai

OM UG JO SA BH KW SY

AZ KZ LK KG AE TYROLIT OY
FI c/o Tyrolit AB, box 533
183 25 Täby
Other Sweden

GENERAL 291

PL TYROLIT POLAND SP. Z O.O. Tel: +48 22 814 22 02
AD ES MA Białołęcka 233A Fax: +48 22 814 22 03
MU TN DZ FR 03-253 Warsaw [email protected]
PR Poland www.tyrolit.com
IT SM
KH MY ID SG LA MN JP TYROLIT S.A. Tel: +34 93 223 98 20
TW VN HK PH KR TH Avda. 3a del Parc Logístic, nr. 26 Fax: +34 93 223 98 27
BY LV LT UA Parc Logístic de la Zona Franca E-08040 [email protected]
CY Barcelona | Spain www.tyrolit.es

TYROLIT SAS Tel: +33 1 69 31 95 50
3 rue Vitruve, Z.A. de la Prairie Fax: +33 1 69 31 95 51
91140 Villebon sur Yvette [email protected]
France www.tyrolit.com

ABRA-METAL, INC. Tel: +787-2740505
724 Ave Julio Andino [email protected]
PR-00924 San Juan www.abrametal.com
Puerto Rico
Tel: +39 0445 801836
TYROLIT S.R.L. Fax: +39 0445 359972
Via dell‘Elettronica 6 [email protected]
36016 Thiene (VI) www.tyrolit.com
Italy
Tel: +6624021733
TYROLIT THAI DIAMOND CO., LTD Fax: +6622517863
1550 New Petchburi Road, [email protected]
Thanapoom Tower 20th Floor, www.tyrolit.com
10400 Bangkok | Thailand
Tel: +370-61235295
UAB “TTS TOOLTECHNIC SYSTEMS” [email protected]
Ašigalio g. 6 www.tts-company.lt
LT-49142 Kaunas
Lithuania Tel: +35799685101
Mail: napostoloutrading@cablenet.
N. APOSOLOU GENERAL TRADING LTD com.cy
Theonos 5
1016 Nicosia
Cyprus

SPET Tel: +86 21 6265 6982/83/85

CN Tower 2, No 239 Jiuyuan Road, Qingpu Fax: +86 21 6265 3335

201712 Shanghai [email protected]

PR China www.spetrading.cn

Other

GENERAL 292

Other Catalogue

General information

The tools shown in this catalogue,
the information regarding delivery,
appearance, performance and dimen-
sions shall comply with the according
status at the time of printing. We de-
velop our products continuously. We
reserve the right to change without
prior notice. All errors and misprints
reserved.
Reprinting as well as any kind
of reproduction – even partially
– is not permitted without the
written permission of TYROLIT
CONSTRUCTION PRODUCTS
GmbH, 6130 Schwaz/Austria.

A detailed version of our terms
and conditions can be found at

www.tyrolit.com



TYROLIT CONSTRUCTION PRODUCTS GmbH 20074415-EN-0318
Swarovskistraße 33 | 6130 Schwaz | Austria
Tel +43 5242 606-0 | Fax +43 5242 63398
Our worldwide subsidiary companies can be found
on our website at www.tyrolit.com

Follow us on Facebook
facebook.com/TYROLIT