LIGHT TACTICAL ARMORED VEHICLE MILITARY, POLICE & HLS APPLICATIONS
THE SANDCAT FOV THE SANDCAT MK-IV SANDCAT - THE SOLUTION FOR CHANGING MISSION PROFILES The SandCat has built its reputation on quality, protection, design, and operational capabilities. First launched in 2005, The SandCat family of 4X4 armored vehicles has been designed to support a wide range of missions including law enforcement, Special Forces, peacekeeping, homeland security, border patrol and armed conflict. SandCat vehicles are also used for transporting troops, as a command and control and communication center, weapon carriers and to transport VIPs though conflict zones. More than 700 SandCat armored vehicles have been deployed so far in a variety of missions in 16 countries on 5 continents among them several NATO countries - The SandCat has evolved into a broad Family of Vehicles. The SandCat Mk IV is the latest generation of the Plasan SandCat family of 4x4 armored vehicles – one of the most advanced COTS (Commercial Off The Shelf) chassis-based off-road armored vehicle on the market today. The SandCat Mk IV is designed to provide a superior level of protection for military defence operations and law enforcing units or SWAT teams which are carried out throughout the most challenging environments, urban arenas and rough terrain. The SandCat Mk IV modular vehicle can be configured to accomplish a wide range of missions, whether for patrolling, command & control, tactical, logistic, or weapons carrier capabilities. The SandCat Mk IV overcomes obstacles performing tactical maneuvers by utilizing its advanced automotive design features such as short wheel base providing optimal weight balance, and a powerful 330bhp 6.7L V8 engine.
DESIGN THE KITTED-HULL CONCEPT PROTECTION The SandCat protection is modular and can be configured between STANAG 2 and STANAG 3 (or equivalent), subject to payload requirements. Six (6) Universal Firing Ports permit the crew to fire their weapons from the safety of the protected cabin and the interior is designed to accommodate many different communications systems and other equipment. Two-zone air-conditioning is standard and options include independent heater, NBC filtration, FireSuppression Systems, situational awareness systems and either manual or remote-controlled roof-mounted weapons (RWS). Plasan Patent Protected Technology: Advanced Composite-Armor Hull of ChassisBased and monocoque vehicles. For Local Production of your OWN Tactical Armored Vehicle at your destination country! A ToT (Transfer of Technologies) CKD (Completely Knocked Down) Project.
PDMPC0051ENG 04/2021 ©Plasan Ltd.2021 GENERIC SPEC Length (bumper to bumper + spare tire) 5940 mm Height 2,540 mm Width 2,315 mm Wheelbase 3,467 mm Track 1,995 mm Ground clearance 300 mm (under axle) SEATING 11 seats configuration APC 11 seats configuration (2 front, 3 second row, 3 opposite 3 at rear part) Doors & Hatches a. Four (4) Side doors for easy embarking b. One (1) Rear door for fast exit c. One (1) Roof hatch for Curb weight 7,500kg (depending on protection) Gross Vehicle Weight (GVW) with reinforced axels 9,300 Kg Payload with reinforced axels Up to 1,800 kg PROTECTION Protection Level Ballistic and Mine Protection according to STANAG 4569, Integrated IED Protection. Scalable according to customer requirements. Gun Ports 6 Integrated Gun Ports Modular Armor Solution Modular bolted “Kitted-Hull” armor design Enables replacement of individual armor part at workshop level PREFORMANCE Maximum Speed Electronically limited to 105 km/h (65 mph) Gradient 60% Side Slope (Static) 35° Turning Circle Diameter (Curb-to-Curb) 16.6 m Turning Circle Diameter (Wall-to-Wall) 17.0 m Approach Angle 39°~55° depending on tires and bumper configuration Departure Angle 35° Vertical step Climbing 450 mm ENGINE Engine type and cylinders 6.7 L V8 OHV Power-Stroke® TurboDiesel Engine output 330 Hp @ 2,600 rpm Engine torque 725ft.-lb @2,000 rpm ; 1016 Nm @ 2,000 rpm Power-to-weight ratio HP/t > 35. hp / ton Fuel tank capacity 135 liter, Autonomous 500Km DRIVELINE AND SUSPENSIONS Wheel drive, Transmission, Wheels & tires Part-time four-wheel drive; electric transfer case, shift on the fly; automatic/ manual locking hubs Transfer case 2-speed electronically operated Differential locks Rear - limited slip differential Brakes 4-wheel vented disk, ABS, ESP Steering Hydraulic power assist recirculating ball steering Suspension Front - coil springs, Rear - leaf springs Gearbox 10-Speed Automatic WHEELS & TIRES Wheels & tires 335/80 R20 Off road tires (optional All season tires 285/70 R 19.5) Super-single rim for rear wheels, including Run-flat System ELECTRICITY Electric system Dual Battery 78 Amp-hr, 12V, 750 CCA;140A Dual Alternator 397A-12V Electric components Air Vent, Interior lights , 1 Map Light, Reverse Camera, Search light Air Conditioning system Original + Additional Air condition (A/C) unit for rear compartment OPTIONAL EQUIPMENT RCWS 12.7 mm (Browning) or Manual GPK Gunner Protection Kit (GPK) Front winch 24V Electric system - Additional dual Battery 78 Amp-hr, 12V, 750 CCA And Dual Alternator 157A 12V + 100A 24V (150A is optional) TECHNICAL SPECIFICATIONS AND PERFORMANCE [email protected] * All figures, measurements and numbers may change according to final design ** This document gives only a general description of the Plasan product(s) or services, Plasan expressly disclaims any liability arising from any information contained in this data sheet