Preparing electrical power and hydraulic tools

Rating Sheet 9.1.2: Select, identify, maintain and store electric power and hydraulic
tools

Demonstration with oral Questioning

Trainee’s name:
Trainer’s name:
Unit of competency:
Competency standards:
Date of assessment:
Time of assessment:
Instructions for demonstration
Given the necessary materials the trainee must be able to: Select, identify, maintain
and store electric power and hydraulic tools.

Materials and equipment:

 to show if evidence is
demonstrated

During the demonstration of skills, did the student: Yes No N/A

Parts of electrical power tools are identified in   
accordance to manufacturer’s manual.

Electrical power tools are inspected for damage in line   
with a prescribed checklist.

Defective parts /components/accessories are replaced   
according to manufacturer’s specification.

















The trainee’s demonstration was: Not Satisfactory 

Satisfactory 

Code No. Prepare Electric Power and Hydraulic Date: Developed Date: Revised Page #
CON 724308 Tools
Sept. 20, 2010 2

Rating Sheet 9.1.2: Select, identify, maintain and store electric power and hydraulic
tools

Trainees Name Date
Competency:
Test Attempt
1st 2nd 3rd

Directions: OVERALL EVALUATION

CALL TRAINER, ask trainer Level PERFORMANCE LEVELS
to assess your performance
in the following critical task Achieved 4 - Can perform this skill without supervision and
and performance criteria with initiative and adaptability to problem
below situations.

You will be rated based on 3 - Can perform this skill satisfactorily without
the overall evaluation on assistance or supervision.
the right side.

2 - Can perform this skill satisfactorily but
requires some assistance and/or supervision.

1 - Can perform parts of this skill satisfactorily,
but requires considerable assistance and/or
supervision.

Trainer will initial level achieved.

PERFORMANCE STANDARDS
For acceptable achievement, all items should receive a "C" , C NC N/A
NC , and "N/A" response.

Prepare electrical power tools
Prepare hydraulic tools
Store electrical power and hydraulic tools

Code No. Prepare Electric Power and Hydraulic Date: Developed Date: Revised Page #
CON 724308 Tools
Sept. 20, 2010 3