Prospec brochure

51

DescriptionMaintenance
The Prospec maintenance package is available
to guarantee your changing facilities remain fully
functional at all times, ensuring that you deliver
first class standards to your customers.

Key Benefits
• Our 12-month maintenance package

includes a minimum of 2 annual service visits.
• Full assessments are carried out by

trained operatives.

Service includes the following: -

• Lubrication of all lock cylinders
• Check all locks are in working order and carry

out any adjustments or repairs necessary
• Tighten all locker hinge screws
• Realignment of locker doors
• General repair of hinges, handles and bench

seating to cubicles
• Replace any chargeable fittings, as identified

and agreed during the initial assessment.
• Maintenance package includes all labour costs

52

53

116 75 25 25 25

CL 750 25 745
900
778590 25 60

60 840
840

TECHNICAL 3585

Information 900

54

75 75 762
900

Plan Internal Foot Detail

3.
2.

1.

55

Lock Descriptions

Cost Categories 1 Low Level. Low resistance to attempted break-in with basic equipment.
Not suitable for public facilities. Any lock system fixed direct to the back
Locking of locker doors is in this category. The resistance being reliant on the pull
out strength of the screws.
Systems
Suitability

2 Medium Level. Has some resistance to attacks from casual thieves.
Only suitable for installations with constant staff supervision.

Health, fitness Public sports Educational Wet area High risk / high Medium to High Level. Resistant to attacks from experienced thieves.
Suitable for use in both private and public facilities with reasonable levels
& private use facilities use use wet area 3

Operation Categories of supervision.

4 High Level. Specification including addition of continuous angle guards
and anti-tamper fixing screws. Resistant to determined attacks from
Padlock Coin Card Coin & Key Electronic Combination
Card experienced thieves with specialist equipment. Suitable for installations

with limited staff supervision and or lockers in remote locations. Highly

recommended when the facility has a previous history of theft.

Prospec can provide the highest level of security available in the industry.
It should be noted that the items supplied are storage lockers, not
safes and as such there can be no absolute guarantee of resistance
to determined thieves who are becoming increasingly ingenious in
their methods.

56

Prospec Removable Cylinder Prospec Removable Cylinder Single Prospec Removable Cylinder Dual Locking
Coin Lock Coin Collect Lock Coin Collect Lock
systems
Prospec Removable Cylinder Coin Lock with Prospec Removable Cylinder Coin Collect Lock Prospec Removable Cylinder Dual Coin Collect
coin refund, (also available with card system) with coin retain function, coin box with separate Lock with coin retain function, either coin retained,
removable nickel-plated brass cylinder, drilled master key, removable nickel plated brass coin box with separate master key, removable
security key, master series with 2,000 differs. cylinder, drilled security key, master series with nickel plated brass cylinder, drilled security key,
Fixed to backplate with 4no anti tamper torx 2,000 differs. COIN BOX fixed to backplate with master series with 2,000 differs. Fixed to
screws. Attached to the door and aluminium 4no anti tamper torx screws. Attached to the door backplate with 4no anti tamper torx screws.
numberplate by 316 grade stainless steel and aluminium numberplate by 316 grade Attached to the door and aluminium numberplate
through fixings. stainless steel through fixings. by 316 grade stainless steel through fixings.
COIN BOX fixed to the door on aluminium
Supplied with 1no user key per lock, 2no Supplied with 1no user key per lock, 2no master number / backplate by 316 grade stainless steel
master keys and 2no cylinder removal key keys, 2no cylinder removal key and 2no coin through fixings.
per installation. box master keys per installation.
Supplied with 1no user key per lock, 2no master
Cards can be supplied by Client or Prospec. Coin Box Options: keys, 2no cylinder removal key and 2no coin box
Hole punch available to allow cards to be Integral capacity 8 coins. master keys per installation.
made on site. Additional, capacity 50 coins.
Additional, capacity 100 coins. Coin Box Options:
3 Integral capacity 8 coins.
3 Additional, capacity 50 coins.
Additional, capacity 100 coins

3

57

Locking Prospec / Kaba Removable Cylinder Prospec / Kaba Removable Cylinder Aluminium Hasp & Clasp
Coin Lock with Coin Refund Coin Collect Lock with Coin Retain Aluminium Hasp and Clasp from machined
Systems Prospec / Kaba Removable Cylinder Coin Lock aluminium engaged into grooves in the
with Coin Refund, removable KABA cylinder, Prospec / Kaba Removable Cylinder Coin Collect doorframe profile, clasp is formed by machined
drilled security key, unique master series with Lock with Coin Retain function, removable KABA hole in the door and aluminium numberplate
100,000 differs, fixed to backplate with 4no anti cylinder, drilled security key, unique master series attached to the door by 316 grade stainless
tamper torx screws. Attached to the door and with 100,000 differs, fixed to backplate with 4no steel through fixing into satin anodised aluminium
aluminium numberplate by 316 grade stainless anti tamper torx screws. Coin box with separate doorknob.
steel through fixings. master key. Attached to the door on aluminium
numberplate by 316 grade stainless steel Padlock can be supplied by Client
Supplied with 1no user key per lock and 2no through fixings. or Prospec.
cylinder removal key per order.
Supplied with 1no user key per lock, 2no master 4
4 keys, 2no cylinder removal key and 2no coin
box master keys per installation.

Coin Box Options:
Integral capacity 8 coins.
Additional, capacity 50 coins.
Additional, capacity 100 coins.

4

58

Hasp/Camlock Dry Area Camlock Wet Area Camlock Locking
Body chrome plated steel. Anti-rotation device, Standard Camlock, nickel plated with 10 wafer Standard Camlock from solid brass, nickel-plated
aluminium numberplate attached to the door by cylinder, reversible toothed key, master key series cam lock with 6-pin cylinder, drilled security key, systems
316 grade stainless steel through fixing into satin with 4000 differs. Attached to the door on master key series with 1600 differs. Attached to
anodised aluminium doorknob. aluminium back plate using through fixings. the door on aluminium number / backplate by
316 grade stainless steel through fixings.
Padlock can be supplied by Client or Prospec. Supplied with 1No user key per lock and 2No
master keys per installation. Supplied with 1no user key per lock and 2no
4 master keys per installation.
2
2

59

Locking Prospec Mechanical Code Lock Prospec OTS Prospec OTS Advanced
Combination lock for lockers equipped with
Systems 4 dials that allows the choice of a 4-digit Transponder operated stand-alone lock, Transponder operated stand-alone locks,
numerical code by the user. Fixed combination powered by 4 AA batteries with 30,000 cycle's powered by 4 AA batteries with 30,000 cycle's
or reset use. Attached to the door on a backplate battery life. battery life.
using through fixings.
• Resistance to Humidity IP55. • Resistance to Humidity IP55.
2 • Compatible with Technogym wellness system, • Compatible with Technogym wellness system,

other wellness cashless purchasing & access other wellness cashless purchasing & access
control systems. control systems.
• 2 level master key system. • 2 level master key system.
• Operates on Mifare 1k & 4K technology. • Operates on all Mifare technology.
• Lock, strap & card programmer. • Real time functionality.
• Option of dedicated user use.
Accessories • Auto opening function.
• Events log.
• Infoterminal - Showing locker number or • LED indicated lock status.
individual straps and cards. • PC Software.
• NFC Programmer.
• Strap Return Unit. • CN reader.

3 Accessories

• Infoterminal - Showing locker number or
individual straps and cards.

• Strap Return Unit.

3

60

Prospec OCS Prospec Keystraps Numbered Discs / Safety Pin Locking
Moulded from flexible PVC, 316 grade stainless 25mm Diameter White Trafolyte disc with black
Battery operated standalone electronic digital lock steel buckles, with black numerals, for all cam engraved numerals. systems
with 4-digit user selected code input, master key, and coin locks.
management key and disabled user key option. Numbering sequence to order.
LED indicators for lock/unlock and low battery Colour: Blue / Green / Red / Yellow / Orange /
warning, 4 AA size batteries, 10,000 cycles, Grey / White.
deadbolt locking for security, fixed through the
door with steel screws. Numbering sequence to order.

• Can be assigned for private clubs or shared
use for public buildings.

• Keypad.

Options:
Separate numberplate.
Engraved numerals on laminate doors.

3

61

Locker Configuration 1230 730
400 400 400
930 600 298 300 400 3 500
10 900 500 10 359 500
300 300 300 236 336
1820 449 CLEAR. CLEAR.
236 1820
CLEAR. 336
CLEAR.
Locker plan
Locker plan Locker plan
930 Clear opening size for a 300mm
300 300 300 & 400mm wide ‘Z’ locker.

1230 400 15 730
400 400 300 15

400

Locker 1050 1070 750
10
Systems 1830 1830 1820

770

100 100 100

Generic locker front Generic locker front Generic ‘Z’ locker
elevation. elevation. front elevation.
300mm wide (various tierage). 400mm wide (various tierage). 300mm & 300MM wide.

62

400 300 400 400 300 400 500
400

Coat hook

400-800
FFL.
1200
1150 MAX.
800

Accessible lockers elevation Typical section

500 Accessible lockers section

Coat hook 1000
490
Coat hook Coat hook Locker
490 490
Systems
1820 1820
1820

Coat hook Coat hook Coat hook
490 490 490

10 10
100 100

10

Generic locker side Back to back lockers
elevation side elevation

63

Locker Volume M³

Locker 300mm Wide X 500mm Deep Capacity (Approx) M³ Locker 400mm Wide X 500mm Deep Capacity (Approx) M³

Tierage Height Height Height Height Height Height Tierage Height Height Height Height Height Height
1 900 1000 1200 1500 1800 2000 1 900 1000 1200 1500 1800 2000
2 0.1350 0.1500 0.1800 0.2250 0.2700 0.3000 2 0.1800 0.2000 0.2400 0.3000 0.3600 0.4000
3 0.0750 0.0900 0.1125 0.1350 0.1500 3 0.1000 0.1200 0.1500 0.1800 0.2000
4 0.0600 0.0750 0.1350 0.0990 4 0.0800 0.1000 0.1200 0.1300
5 0.0450 0.0563 0.0675 0.0750 5 0.0600 0.0750 0.0900 0.1000
6 0.0450 0.0540 0.0600 6 0.0600 0.0720 0.0800
0.0450 0.0499 0.0600 0.0666

Locker Setting Out.

Locker Section detail loc 500 Section detail w
support bench s with floor moun
Systems Section detail w
1830 overall locker 475 with cantilevere899 Door Coat hook
height including base
From F.F.L 390 Coat hooks fitted
1980 overall locker height 197 185 only in single
and 2 tier locker
1830 compartments
1800
1455

1830
1800

350 623 Door Coat hook
206 165
290

30mm x 30mm 20 257 450 475
bearers
Laminate facia
30mm x 30mm R.H.S 491 (by Prospec) 455
mild steel brackets
Finished
Section detail locker Section detail welled locker
support bench seating Section detail welled locker with floor mounted bench
with cantilevered bench

64

1830 lockers o/a

500 O/A Locker 500 O/A Locker 1
375 O/A plinth
Locker
end panel

RL-9046 RL-9046 RL-9046 RL-9046 RL-9046 RL-9046

15mm
Tolerance
Locker Min 125 15mm
base. Tolerance
Locker
Angle bracket 15mm 15mm
SystemsToleranceTolerance

Angle bracket option Aluminium frame
plinth option

5 500 O/A Locker 500 O/A Locker
500 O/A Locker

Locker
door

4 440 O/A

Timber 455 O/A

Finished plinth

Locker Timber Concrete plinth by
base. plinth main contractor -
to be built level

Timber plinth option Concrete plinth Plinth
option
1830 Plinth O/A
Locker tolerance
between walls

65

450 450
600

1200

SEATING R75 ECO type ECO type
coat hook on coat hook on
Technical 600 laminate rail laminate rail
R75
450 450 450
50 400R100030 30
R10 200
12042842020
475 FFL
GRP Seating Section of Section of Wall &
1500 C/L of CoatrailCantilevered SeatingFloor Mounted Seating
418G

120
475 FFL

1500 C/L of Coatrail

66

450
930

620 620 Cubicle divider
1700
Max 750mm spacing

Cubicle divider

ECO type ECO type sEAting
coat hook on coat hook on
laminate rail laminate rail Technical
120
450 475 FFL930 450
30 30 200 30 420
126 1500 C/L of Coatrail
1500 C/L of Coatrail20
20
120
Section of Floor 475 FFL
Mounted Seating 475 FFL

Section of Section of
Island Seating Cubicle Seating

67

900 900 787 225 788 900

789 116 789 116 695 717 761 Plinth Fixing Detail.
750 750 656 679
CL CL CL Plinth Detail 9mm WBP
840 750 Cross rail CL 113 CL113 Ply to Tile & Render.
25 25 25
25 25 13 25 25 75 25 Section Detail
60 25 75
25 25
300
853
60 25 25

840 745 762

TROJAN 75 75
900 900
duct panels
Plan
Technical
3585

900 200 924 28
30 840 60 840 857 50 844

550 2400 75
610 50
1250 75 75 1250
200 Lift On/Off
Lift On/Off Lift On/Off 300 800Lift On/Off Lift On/Off
400 50
2400 2000
510 2225
Lift On/Off Lift On/Off
Push On/Off
100 Lift On/Off Lift On/Off Lift On/Off 795 450
450 550 Lift On/Off Lift On/Off Push On/Off 1000
500
1100

100 100

Front Elevation

68

Generic Counter Top Vanity

Variable

50 560 100 Variable
Upstand 100
5 Front Elevation
850 Block end
502 50 Variable
Wall to front 650 Block End350
face of panel. 100 Front Elevation 850 550 560
Generic Semi Recessed Vanity
Side Section Variable. 850 850 Plan View

50 350 100 Front Elevation TROJAN
Upstand 850
342 50 Variable. VANITY UNITS
Wall to 200 Block
front face end Technical
of panel.
Block end
Side Section
Plan View
450
Generic Trough
Side Section
Variable.
550
850 Fall Fall 450
Side Section 250

Block end

Plan View Generic Slab

Variable.

850 550
50
850

Front Elevation Plan View

69

Prospec manufacture a range of cubicles that can
meet a variety of design concepts and budgets.

cubicle Cloud Air Cabrillant Conform

range Cloud is a highly engineered, full Air is a modern and alternative Cabrillant is the original glass Conform was developed for the
height, flush fronted glass toilet cubicle option for both shower panel cubicle system London 2012 Olympic pool and
cubicle system that has been and toilet cubicles. developed in Switzerland over is now an established product.
developed for the commercial 30 years ago.
washroom sector.

70

Classic Suspended System D Connect

Classic is our original fully framed Suspended has specially System D is a streamlined system Connect is an elemental system
cubicle system, which has been engineered design flexibility with a curved appearance. suitable for toilets and showers
developed and improved over that enables it to be installed within leisure and general
many years. in almost any project. commercial applications.

71

A 3 3
12 4
2B
87 5 5

4
16

6

8 7

cloud A Cloud Lock Detail B Cloud Hinge Detail
1 - Lock body. 1 - Decorative rosette.
Technical 2 - Lock finger. 2 - Adjustable nylon ferrel.
3 - Adjustable lock receiver. 3 - 6mm x 6mm T& L, low iron glass.
4 - 8mm T& L, low iron glass. 4 - Concealed rossette.
5 - 6mm T& L, low iron glass. 5 - Hinge.
6 - Adjustable floor channel. 6 - 8mm T& L, low iron glass.
7 - Protective door gasket. 7 - 6mm T& L, low iron glass.
8 - Indicator face plate. 8 - Adjustable floor channel.

Door Lock Door Stop Door Hinge Head Rail

72

5 7 D

46 4
3 3 43
12
8
C 5
22
C Cloud Ceiling Detail 66 cloud
1 - 8mm T& L, low iron glass. 11
2 - 6mm T& L, low iron glass. 77 Technical
3 - PVC gasket.
4 - Ceiling channel. D Cloud Floor Detail
5 - Anchor screw/plug (into ceiling). 1 - Base profile.
6 - Foam protection tape. 2 - Adjustable floor channel.
7 - Clip in section (between door openings). 3 - 8mm T & L, low iron glass.
4 - 6mm T & L, low iron glass.
5 - Glass protection layer.
6 - Adjustable screw.
7 - Fix down screw/plug (info floor).
8 - Channel endcap.

Floor Channel Lock Indicator Door Handle

73

2

A 5.
6.
3. 4. 5.
2.
1 6. 5. C D
7.
air 1. 7. 6. 4. 3. 3. 4.
4. 5. 2. 2.
Technical 8. 1. 1.
1
B

2. 3.
1.

7 6.

A Air Lock Detail B Air Hinge Detail C Air Head Rail Section Detail D Air Foot Section Detail
1 - 8 & 6mm T & L, low iron glass. 1 - Ground rosette.
2 - Lock receiver (base). 1 - 8 & 6mm T & L, low iron glass. 1 - 8 & 6mm T & L, low iron glass. 2 - Aluminium leg.
3 - Lock receiver (adjustable). 3 - Clamping bracket.
4 - Lock finger. 2 - Hinge. 2 - Concealed rosette. 4 - Angle bracket.
5 - Lock housing 5 - 8 & 6mm T & L, low iron glass.
6 - Indicator face plate. 3 - Screw. 3 - Socker head screw. 6 - Concealed rosette.
7 - Door stop plate C/W buffer.
4 - Divider. 4 - Door stop arm.

5 - Rosette. 5 - Shock bracket.

6 - Concealed rosette. 6 - ‘Puck’ glass bracket.

7 - Stabalizing bar

8 - Rear panel bracket

Door Lock Door Hinge Head Rail Foot

74

6. C 8.

A 4. 7. Internal Foot Detail 5. CABrillant 600
5.
3. 1. D Technical
2. 3.
2. 4. 2. 4.
1. 1.
3.
7. 6. 5. 4. 1. 1
1 2.
B 5.
1.
3. 2.

6.

A Cabrillant 600 Lock Detail B Cabrillant 600 Hinge Detail C Cabrillant Head Rail Section Detail D Cabrillant 600 Foot Section Detail
1 - Pilaster - variable glass. 1 - Pilaster - variable glass. 1 - Pilaster - variable glass. 1 - Ground rosette.
2 - Receiver. 2 - Hinge. 2 - Door stop front clamp. 2 - External aluminium leg (female).
3 - Latch lock (variable handling). 3 - Screw. 3 - Door stop rear clamp. 3 - Clamping bracket (rear).
4 - Divider. 4 - Shock bracket. 4 - Clamping bracket (front).
1 4 - Lock knob. 5 - Rosette. 5 - Socket head screw. 5 - Pilaster - variable glass.
5 - Indicator face plate. 6 - Adjustable eccentric nylon ferrule. 6 - Stabilizing bar top clamp.
6 - Adjustable eccentric nylon ferrule. 7 - ‘Puck’ glass bracket.
7 - Concealed rossette. 8 - Stabilizing bar.

Door Lock Door Hinge Head Rail Foot

75

1

A 4. 4. 6. 5. D 5.
7. 8. 2.
3. 5.
3.
CABrillant 700 2. 1. 3. 4.
1. 2.
Technical C 1.

7. 6. 5. 4. 3.
1.
B
2.
2. 3. 2. 5. 1.

1 1.

6.

A Cabrillant 700 Lock Detail B Cabrillant 700 Hinge Detail C Cabrillant 700 Head Rail Section Detail D Cabrillant 700 Foot Section Detail

1 - Pilaster - variable glass. 1 - Pilaster - variable glass. 1 - Pilaster - variable glass. 1 - Ground rosette.

2 - Receiver. 2 - Hinge. 2 - Door stop front clamp. 2 - Aluminium leg.

1 3 - Latch lock (variable handling). 3 - Screw. 3 - Door stop rear clamp. 3 - Clamping bracket (divider).

4 - Lock knob. 4 - Divider. 4 - Shock bracket. 4 - Angle bracket.

5 - Indicator face plate. 5 - Rosette. 5 - Socket head screw. 5 - Pilaster - variable glass.

6 - Adjustable eccentric nylon ferrule. 6 - Adjustable eccentric nylon ferrule. 6 - Stabilizing bar top clamp.

7 - Concealed rossette. 7 - ‘Puck’ glass bracket.

8 - Stabilizing bar.

Door Lock Door Hinge Head Rail Foot

76

A 5. C D 8.

4. 3. 4. 7.
5.
2.
4.

3. 6. 6B
7.
5. 6. 1. 3. 6.
8. 3. 7. 2. 7.
4.
2 2. 9. 1.
1.
CONFORM
2. 1.
Technical
A Conform Lock Detail B Conform Hinge Detail C Conform Head Rail Section Detail D Conform Foot Section Detail
1 - Emergency breakout strip. 1 - Aluminium vertical profile. 1 - Floor fixing.
2 - Aluminium profile. 1 - Aluminium profile. 2 - Aluminium head section. 2 - Foot.
3 - Compact grade laminate pilaster. 3 - Aluminium head clip-in profile. 3 - Foot bolt.
4 - Aluminiuim latch plate. 2 - Aluminium clip-in section. 4 - Fixing screw. 4 - Angle bracket fixings
5 - Door buffer. 5 - Rosette.
6 - Nylon door handle. 3 - Compact grade laminate door. 6 - Aluminium leg support.
7 - Internal nylon latch. 7 - Aluminium profile
8 - Nylon indicator plate. 4 - Nylon hinge. 8 - Compact grade laminate.
9 - Polybond damping strip.
5 - Aluminium leg support.

6 - Compact grade laminate divider panel.

7 - Compact grade laminate fascia.

1

Door Lock Door Hinge Head Rail Foot

77

A 6 2 C
1
5 B 3
4
3 4
3 2 4 5
2 3
2 D
4
5 1 6

1 7
7

16

classic A Classic Lock Detail B Classic Hinge Detail C Classic Head Rail Section Detail D Classic Foot Section Detail
1 - Aluminium profile. 1 - Aluminium profile. 1 - Screw. 1 - Plastic plug.
Technical 2 - Compact grade laminate. 2 - Compact grade laminate. 2 - Aluminium clip-in profile. 2 - Inner (2 part assembly).
3 - Silicone. 3 - Hinge. 3 - Aluminium head section. 3 - Nylon insert.
4 - Aluminiuim latch plate. 4 - Nylon hinge packer. 4 - Aluminium profile. 4 - Adjustment bolt.
5 - Buffer (door knob). 5 - Silicone. 5 - Aluminium inner profile.
6 - Nylon door knob. 6 - Nylon foot shroud. 6 - Shroud.
7 - Nylon foot shroud. 7 - Screw

Door Lock Door Hinge Head Rail Foot

78

A 5. 4. C D
4. 3. 4.
3. 3.
3. 6. 2. 2. 5.
2. 2
1.
1. B 1. 5.
4. 6.

3.
2. 5.

1. SUSPENDED

A Suspended Lock Detail B Suspen4ded Hinge Detail C Suspended Beam Section Detail D Suspended Foot Section Detail Technical
1 - Aluminium profile. 1 - Aluminium profile. 1 - Aluminium profile. 1 - Floor bolt.
2 - Compact grade laminate. 2 - Compact grade laminate. 2 - Aluminium beam. 2 - Aluminium leg.
3 - Silicone. 3 - Hinge. 3 - Rivet. 3 - Aluminium post.
4 - Aluminiuim latch plate. 4 - Nylon hinge packer 4 - Bolt. 4 - Bottom end cap.
5 - Buffer (door knob). 5 - Silicone. 5 - Clip-in section 5 - Aluminium foot.
6 - Nylon door knob. 6 - Compact grade laminate

Door Lock Door Hinge Head Rail Foot

79

A 6. C

2. 3. 3. 3. 4.
1. 5. 2. 2.
1. 5.
4. 1.
D
8. 7. B 3. 4.
4. 5.
5.
2.

SYSTEM D 1.

Technical A System D Lock Detail B System D Hinge Detail C System D Head Rail Section Detail D System D Foot Section Detail
1 - Aluminium profile. 1 - Aluminiuim profile. 1 - Aluminium ‘U’ channel. 1 - Floor bolt.
2 - Aluminium ‘U’ channel. 2 - Aluminium ‘U’ channel. 2 - Divider panel. 2 - Leg.
3 - Compact grade laminate. 3 - Compact grade laminate. 3 - Headrail. 3 - Return leg angle bracket.
4 - Rivet. 4 - Rivet. 4 - Aluminium profile. 4 - Aluminium profile.
5 - Receiver. 5 - Cranked hinge. 5 - Fixing screw. 5 - End cap.
6 - Sliding latch.
7 - Indicator plate.
8 - Door buffer.

Door Lock Door Hinge Head Rail Foot

80

2

A 1 5. 5.
6.
2. 3. CONNECT 4.
4. 3. D
Technical 2.
3. 4. C
2.

6. B 4. 5.
7. 2. 5.
4 3.
6.
1. 1.

1. 1.

A Connect Lock Detail B Connect Hinge Detail C Connect Head Rail Section Detail D Connect Foot Section Detail
1 - Compact grade laminate fascia 1 - Fixing bolt.
2 - Aluminium receiver 1 - Compact gg2rraaddee laminate fascia. 1 - Divider panel. 2 - Nylon base.
3 - Nylon tip. 2 - Compact laminate door. 2 - Aluminium clip-in profile. 3 - Aluminium foot section.
4 - Aluminiuim finger. 4 - Cap head socket screw.
5 - Aluminiuim lock body. 3 - Aluminium hinge. 3 - Connect aluminium head section. 5 - Compact grade laminate divider.
6 - Compact grade laminate door. 6 - Aluminium foot clamp.
7 - Aluminiuim indicator plate. 4 - Compact grade laminate divider panel. 4 - Screw.

5 - Cap head set screw. 5 - Compact grade laminate fascia.

6 - Brass insert.

Door Lock Door Hinge Head Rail Foot

81

82

Specification

83

Lockers – Wet Use Lockers – Dry Use Options

Specification Material: 0.9mm aluminium sheet bodies with rolled Material: 15mm melamine faced high density Finish/Colour: Glass: 16 Standard RAL colours.
radius rear internal corners. particle board bodies with screw and dowel Non-standard colours available on request.
construction. Compact Grade Laminate: Select from
Door Frames: Extruded aluminium profiles. Hinges manufacturer's range availability.
from aluminium and 316 grade stainless steel with Door Frames: Extruded aluminium profiles.
spring loading for automatic door closing. Hinges from aluminium and 316 grade stainless Tierage: 1, 2, 3, 4, 5, 6 tier & Z-lockers.
steel with spring loading for automatic door closing.
Base, Top and Shelf Units: High impact ABS Support Plinth Options: Aluminium angle
injection moulding. Aluminium shelves to Z-lockers. Base, Top and Shelf Units: 15mm melamine bracket; aluminium tubular frame; softwood timber
faced high density particle board with screw and frame; locker support bracket with integral seating;
Doors & End Panels: 10.76mm (2 x 5mm leaves dowel construction. concrete (by others).
of glass) toughened and laminated glass with a
0.76mm EVA interlayer or 10mm toughened float Doors & End Panels: 10.76mm (2 x 5mm leaves Lock Options: Prospec removable cylinder coin
glass or 10/12mm compact grade laminate. of glass) toughened and laminated glass with a lock; Prospec removable cylinder single coin collect
Opti-White glass as option. 0.76mm EVA interlayer or 10mm toughened float lock; Prospec removable cylinder dual coin collect
glass or 10/12mm compact grade laminate. lock; Prospec Kaba removable cylinder coin lock;
Edge Treatment: Glass: All edges polished, Opti-White glass as option. Prospec Kaba removable cylinder coin collect lock;
exposed corners with small radius. Laminate: aluminium hasp and clasp, hasp/cam lock; wet area
Bull-nosed with radius corners. Edge Treatment: Glass: All edges polished, cam lock, dry area Camlock; Prospec mechanical
exposed corners with small radius. Laminate: code lock; Prospec OCS; Prospec OTS; Prospec
Standard Sizes: Bull-nosed with radius corners. OTS advanced.
Depth: 500mm
Height: 900mm / 1500mm / 1800mm / 2000mm Standard Sizes: Keystraps: Moulded from flexible PVC or numbered
(Add 30mm for built in base plinth) Depth: 500mm discs with safety pin.
Width: 300mm / 400mm Height: 900mm / 1500mm / 1800mm / 2000mm
Non-standard sizes available on request. (Add 30mm for built in base plinth) Additional Options: DDA compliant number plates;
Width: 300mm / 400mm / 450mm engraved numerals on laminate doors; compact
Fittings: Coat hooks in all compartments of 900mm Non-standard sizes available on request. grade laminate fascia; integral or freestanding
or more high. seating; sloping tops; integral aluminium shoe
Fittings: Coat hooks in all compartments of 900mm compartment; chrome hanging rail in compartments
or more high. of 900mm or higher.

84

Cloud Air Cabrillant 600

Overall Cubicle Height: Up to a height of 2500mm Overall Cubicle Height: 2000mm including floor Overall Cubicle Height: 2000mm including floor clearance Specification
clearance of 150mm as standard, option of 200mm of 150mm as standard, option of 200mm to shower
Frame & Finish: Aluminium extrusions satin silver to shower cubicles. cubicles.
anodised to 25 microns.
Frame & Finish: Aluminium extrusions satin silver Frame & Finish: Aluminium extrusions satin silver
Fittings: Satin anodised aluminium horizontal and anodised to 25 microns. anodised to 25 microns.
vertical profiles, including channels, head rails and
clip in sections; division panels are attached through Fittings: Satin anodised aluminium overhead Fittings: Satin anodised aluminium overhead stabilising
hinge/bracket using aluminium fittings with eccentric stabilising head rail bar set back 200mm; satin headrail bar set back 80mm from front face; satin anodised
adjustment feature. anodised aluminium cubicle support frame, brackets aluminium cubicle support frame brackets and fittings; 2no
and fittings; 1no support leg attached to partition support legs attached to front pilaster with satin anodised
Door Fittings: Satin anodised aluminium panel set back 150mm from front face, concealed aluminium and stainless steel clamp fixings with adjustable
hinge/brackets mechanically fixed into concealed rosettes with mechanical connection to front pilaster ground clearance.
rosettes; engineered satin anodised lock, fixed and adjustable ground clearance.
though door with concealed fixings with outside Door Fittings: Satin anodised aluminium spring loaded
indicator and emergency release function; satin Door Fittings: Satin anodised aluminium spring hinges for automatic opening or closing function; door latch
anodised aluminium coat hooks with integral loaded hinges for automatic opening or closing with outside indicator or internal aluminium doorknob; DDA
rubber buffer. function; door latch with outside indicator or internal compliant door latch with matching grab handles.
aluminium doorknob; DDA compliant door latch with
Pilasters, Doors & End Panels: 15.52mm matching grab handles. Pilasters, Doors & End Panels: 10.76mm (2 x 5mm
(1 x 8mm & 1 x6mm leaf) toughened & laminated leaves of glass) toughened and laminated glass with a
opti-white glass, with a 1.52mm EVA interlayer or Pilasters, Doors & End Panels: 15.52mm 0.76mm EVA interlayer or 10mm toughened float glass or
16mm compact grade laminate. Glass has an offset (1 x 8mm & 1 x 6mm leaf) toughened & laminated 12mm compact grade laminate. Opti-White glass as option.
rebate, creating a consistent appearance on each opti-white glass, with a 1.52mm EVA interlayer or
side, thus eliminating any sightline into the cubicle. 16mm compact grade laminate. Partition Panels: 10.76mm (2 x 5mm leaves of glass)
toughened and laminated glass with a 0.76mm EVA
Partition Panels: 12.76mm (2 x 6mm leaves of Partition Panels: 10.76mm (2 x 5mm leaves of interlayer or 10mm Toughened float glass or 12mm
glass) toughened and laminated glass opti-white glass) toughened and laminated glass with a compact grade laminate. Opti-White glass as option.
glass with a 0.76mm EVA interlayer or 12mm 0.76mm EVA interlayer or 10mm toughened float
compact grade laminate. glass or 12mm compact grade laminate. Edge Treatment: Glass: All edges polished, exposed
Opti-White glass as option. corners with small radius. Laminate: Bull-nosed with radius
Edge Treatment: All edges polished, exposed corners.
corners with small radius. Edge Treatment: Glass: All edges polished,
exposed corners with small radius. Laminate: Colour/Finish: Glass: Ceramic paint solid colour or etch
Colour/Finish: Glass: Ceramic paint solid colour Square edged and polished. effect. Choice of 16 standard colours. Non-standard colours
or etch effect from a choice of 16 standard colours. available on request. Laminate: Select from manufacturer’s
Non-standard colours available on request. Colour/Finish: Glass: Ceramic paint solid colour or range availability.
etch effect from a choice of 16 standard colours.
Accessories: Outward opening doors fitted with Non-standard colours available on request. Accessories: External towel rail; coat hooks; hinge and lock
matching satin anodised pull handle, fixed through Compact grade laminate: Select from manufacturer’s blinds on toilet and changing cubicles; all finished in satin
door using matching fittings. range availability. anodised aluminium; glass quadrant shower shelves; door
holder for outward opening doors; door closers.
Accessories: External towel rail with internal
doorknob; coat hooks; rebate detail on toilet and
changing cubicles; quadrant shower shelves; door
holder for outward opening doors; door closers.

85

Cabrillant 700 Conform Classic

Specification Overall Cubicle Height: 2000mm including floor Overall Cubicle Height: 2006mm including floor Overall Cubicle Height: 2006mm including floor
clearance of 150mm as standard, option of 200mm clearance of 150mm. clearance of 150mm.
to shower cubicles.
Frame & Finish: Aluminium extrusions satin silver Frame & Finish: Aluminium extrusions satin silver
Frame & Finish: Aluminium extrusions satin silver anodised to 25 microns. anodised to 25 microns or polyester powder coated.
anodised to 25 microns.
Fittings: Extruded satin anodised aluminium headrail Fittings: Extruded aluminium headrail and profiles;
Fittings: Satin anodised aluminium overhead and profiles; adjustable anodised aluminium support adjustable anodised or powder coated aluminium
stabilising head rail bar set back 200mm; satin legs / floor attachments with fully concealed stainless support legs / floor attachments with fully concealed
anodised aluminium cubicle support frame, brackets steel fixings and nylon foot cover, set back 200mm stainless steel fixings and nylon foot cover.
and fittings; 1no support leg attached to partition panel from the front face on the division panels.
set back 150mm from front face, satin anodised Door Fittings: 3No solid colour nylon covered
aluminium through fixings with mechanical connection Door Fittings: 3No solid colour nylon covered heavy-duty stainless steel / brass hinges per door;
to front pilaster and adjustable ground clearance. heavy-duty stainless steel / brass hinges per door; concealed nylon door latch with indicator and
concealed nylon door latch; standard handle emergency release; standard handle assembly;
Door Fittings: Satin anodised aluminium spring assembly; emergency breakout strip; DDA compliant DDA compliant handle set with lever action turn and
loaded hinges for automatic opening or closing handle set with lever action turn and horizontal grab horizontal grab handles; 1 coat hook per cubicle
function; door latch with outside indicator or internal handles; 1 coat hook per cubicle and 2 coat hooks and 2 coat hooks to DDA compliant cubicles.
aluminium doorknob; DDA compliant door latch with to DDA compliant cubicles.
matching grab handles. Pilasters, Doors & End Panels: 12mm compact
Pilasters, Doors & End Panels: 12mm compact grade laminate.
Pilasters, Doors & End Panels: 10.76mm (2 x 5mm grade laminate.
leaves of glass) toughened and laminated glass with a Partition Panels: 12mm compact grade laminate.
0.76mm EVA interlayer or 10mm toughened float glass Partition Panels: 12mm compact grade laminate.
or 12mm compact grade laminate. Edge Treatment: Bull-nosed with radiused corners.
Opti-White glass as option. Edge Treatment: Bull-nosed with radiused corners.
Colour/Finish: Select from manufacturer’s range
Partition Panels: 10.76mm (2 x 5mm leaves of glass) Colour/Finish: Select from manufacturer’s range availability.
toughened and laminated glass with a 0.76mm EVA availability.
interlayer or 10mm toughened float glass or 12mm Accessories: Anti-peep rails; anti-camera skirting;
compact grade laminate. Opti-White glass as option. Accessories: Option of anodised aluminium door door holder for outward opening doors; door closers.
furniture; anti-peep rails; anti-camera skirting; door
Edge Treatment: Glass: All edges polished, exposed holder for outward opening doors; door closers. Also available in suspended version with load bearing
corners with small radius. Laminate: Bull-nosed with head beam designed for high-use.
radius corners. Also available in suspended version with load
bearing head beam designed for high-use.

Colour/Finish: Glass: Ceramic paint solid colour or
etch effect from a choice of 16 standard colours. Non-
standard colours available on request. Compact grade
laminate: Select from manufacturer’s range availability.

Accessories: External towel rail; coat hooks and
hinge and lock blinds on toilet and changing cubicles;
all from satin anodised aluminium; quadrant shower
shelves; door holder for outward opening doors;
door closers.

86

Suspended System D Connect

Overall Cubicle Height: 2083mm including floor Overall Cubicle Height: 1981mm including floor Overall Cubicle Height: 2006mm including floor Specification
clearance of 150mm. clearance of 150mm. clearance of 150mm.

Frame & Finish: Aluminium extrusions satin silver Frame & Finish: Aluminium extrusions satin silver Frame & Finish: Aluminium extrusions satin silver
anodised to 25 microns or polyester powder coated. anodised to 25 microns. anodised to 25 microns.

Fittings: Extruded aluminium load bearing head Fittings: Satin anodised extruded aluminium elliptical Fittings: Continuous extruded aluminium headrail;
beam and profiles. headrail and pilasters, brackets and fittings; adjustable extruded aluminium wall channel to rear of each
support leg with fully concealed 316 grade stainless division panel; adjustable pedestal legs with nylon
Door Fittings: 3No solid colour nylon covered steel fixings and adjuster bolt, set back 150mm from base.
heavy-duty stainless steel / brass hinges per door; the pilaster.
concealed nylon door latch with indicator and Door Fittings: 2No spring loaded, soft closing
emergency release; standard handle assembly; DDA Door Fittings: 3No satin anodised hinges per door, hinges; satin anodised aluminium door latch with
compliant handle set with lever action turn and 1 sprung or pair of spring loaded hinges on glass indicator and emergency release to the exterior;
horizontal grab handles; 1 coat hook per cubicle and doors; sliding latch with indicator and emergency rubber buffer sited within the lock receiver; 1 coat
2 coat hooks to DDA compliant cubicles. release; DDA compliant door latch with matching grab hook per cubicle and 2 coat hooks to DDA
handles; 1 coat hook per cubicle fixed to doorframe compliant cubicles.
Pilasters, Doors & End Panels: 12mm compact or 2 coat hooks to DDA compliant cubicles.
grade laminate. Pilasters, Doors & End Panels: 12mm compact
Doors & End Panels: 10.76mm (2 x 5mm leaves of grade laminate.
Partition Panels: 12mm compact grade laminate. glass) toughened and laminated glass with a 0.76mm
EVA interlayer or 10mm toughened float glass or Partition Panels: 12mm compact grade laminate.
Edge Treatment: Bull-nosed with radiused corners. 12mm compact grade laminate.
Opti-White glass as option. Edge Treatment: Bull-nosed with radiused corners.
Colour/Finish: Select from manufacturer’s range
availability. Partition Panels: 10.76mm (2 x 5mm leaves of glass) Colour/Finish: Select from manufacturer’s range
toughened and laminated glass with a 0.76mm EVA availability.
Accessories: Anti-peep rails; anti-camera skirting; interlayer or 10mm toughened float glass or 12mm
door holder for outward opening doors; door closers. compact grade laminate. Accessories: Door holder for outward opening
Opti-White glass as option. doors.

Edge Treatment: Glass: All edges polished, exposed Also available in full Height Version up to 2500mm
corners with small radius. Laminate: Bull-nosed with high, including floor clearance from 15mm to 150mm.
radiused corners.

Colour/Finish: Glass: Ceramic paint solid colour
or etch effect from a choice of 16 standard colours.
Non-standard colours available on request.
Compact grade Laminate: Select from manufacturer’s
range availability.

Accessories: Anti-peep rails; anti-camera skirting;
door holder for outward opening doors; door closers.

87

Specification Trojan Vanity Unit & Trojan Access Bench Seating
Vanity/Grooming Shelf Panel System

Vanity Unit Type 1 – a half size vanity unit with Frame: Prefabricated extruded aluminium frame. Brackets Available: Wall to floor; floor mounted;
cut out for protruding basin. Cantilever, wall construction must be 7N/ mm2;
Panel Height: Standard 3 number panels in full island frames; back to back island.
Vanity Unit Type 2 – a full-size vanity unit with cut height system up to 2400mm high.
out for basin and lower access panel. Support Brackets and Frames: Mild steel box
Panel Type: 12mm compact grade laminate or sections, welded construction, bright zinc plated
Vanity/Grooming Shelf - postformed countertop. 10mm toughened glass. with polyester powder coating finish.
Framing: Fully extruded aluminium framework
sections, connected using horizontal cross sections Method of Fixing Panels: Panels fixed to frame Fixing to Floor: Adjustable feet to accommodate
and ‘z’ sections, fixed via screwport connections. using plastic keku clip, located and screwed to sloping floors, moulded nylon bases and covers
prefabricated aluminium frame. Between 4 to 6 with 316 grade stainless steel adjuster bolt or
Material: 10mm/12mm compact grade laminate with number per panel, with concealed fixings using direct to floor with insitu brackets and 316 stainless
resin formed corners and post formed HPL bonded stainless steel screws. steel screws. Island frames and floor mounted can
to surface or solid surfacing minimum thickness be free standing.
10mm bonded to moisture resistant 25mm MDF Joint Treatment: Vertical and horizontal shadow
substrate or high pressure laminate bonded to bands formed from HPL bonded to 18mm WPB Fixing to Walls: 316 stainless steel coach screws
moisture resistant MDF or WPB plywood, minimum plywood. and plastic plugs.
thickness 18mm.
Included Features: Part-height cistern covers Seat Slats: Flat compact grade laminate slats or
Colour/Texture: Select from manufacturer’s with matching tops. postformed HPL bonded to 12mm compact grade
range availability. laminate with curved front 50mm radius downstand
Finish / Colour: Glass: Choice of 16 standard or hardwood timber.
Accessories: End panels; chrome ferrules, colours. Non-standard colours available on request.
mirrors, pelmets. Compact Grade Laminate: Select from manufacturer’s Coat Hook Rails: To match.
range availability.
Fittings: Nylon moulded coat hooks.
Available in heights up to 4000mm consult with
Prospec Ltd for recommendations and details. Finish/Colour: Steel brackets and frames: Polyester
powder coated from standard RAL charts.
Compact grade laminate: Select from manufacturers
range availability.

88

GRP Bench Seating Specification

Base Options: Weighted with a rubber anti-slide
base (with the exception of A3 3 metre & G3 3 metre).
Un-weighted with rubber anti-slide base.
Fitted with anchor bolts.

Fixing to Floor:

Weighted: Modules supplied weighted to prevent
people from moving installation to another area.
Weighted modules are ideal if you would like the
flexibility to move seating at a later date and the
security that they will be safe.

Un-weighted: This supply option offers the utmost
in flexibility and is ideal for domestic use or in areas
where you want to move seats quickly and easily,
such as events/exhibition spaces.

Fitted with Anchor Bolts: Modules are complete
with anchor bolts for permanent fixing - ideal for
public open spaces or where security may be
an issue.

Construction: Modular.

Material: 100 % GRP Fibreglass.

Colour: Any BS/RAL colour.

89

symbolof
recognition

Prospec Limited
Canklow Meadows Estate, West Bawtry Road, Rotherham S60 2XL, England
Tel: +44 (0)1709 377147 Fax: +44 (0)1709 375239

www.prospec.co.uk [email protected]

90

91