GP50_Catalog_FULL_Reduced_04-2017

GP:50 model 411, 411X/P

Dimensional Drawing

All dimensions are in inches (mm)

STANDARD WIRING 0.38 [9.65] Ø1.50 [38.10]
5.52 [140.23] 1/2" NPT(M)
WIRE MODEL
411X/P
RED
BLK +EXC/SIG
GRN -EXC/SIG
SHIELD CASE GND

OPEN

1/4" NPT(F)

Reference Specifications Mechanical

ELECTRICAL • Process Connection:
0-5 thru 0-15K PSI (0-0.3 thru 0-1,035 BAR), PSIV: 1/4” NPT (F)
• Supply Voltage: 12-36 Vdc 0-20K thru 0-50K PSI (0-1,380 thru 0-3,450 BAR): Autoclave
• Output Signal: Two wire 4-20 mA with digital HART protocol type F-250-C
0-60K thru 0-75K PSI (0-4,135 thru 0-5,170 BAR): Autoclave
(optional 4-20 mA temperature output) type F-312-C150
• Input Impedance: 250 Ω at 17 Vdc
• Insulation Resistance: Better than 10 MΩ at 50 Vdc • Proof Pressure:
• Circuit Protection: RFI/EMI, reverse polarity 0-15K (1,035 BAR) PSI 1.5X FSO
20K-100K (6,894 BAR) PSIG 1.2X FSO
(voltage transients above 45 V to 20 A at 0.02 milliseconds)
• Resolution: 12-bit • Burst Pressure:
• Frequency Response: From 0.07 to 40 sec (software 0-15K 3X FSO
20K-100K (6,894 BAR) PSIG 1.5X FSO or 125K PSIG (8,618
adjustable) BAR), whichever is less
• Connection: 1/2” NPT M conduit with 6-ft 18 AWG multi
• Long-term Stability: 0.25% FSPR over six months
conductor cable • Approximate Weight: <24 oz (0.7 kg)
• Enclosure: IP67
Materials of construction
Thermal Specifications
• Wetted Parts: 17-4 PH stainless steel
(Optional Inconel 718, K12X, or 13-8 Monel) • Compensated: 0 to +170 °F (-18 °C to +77 °C)
• Operating Ambient: -40 °F to +185 °F (-40 °C to +85 °C)
• Housing: 316 stainless steel • Effect on Zero/Span (1:1): ±0.25% FSO/100 °F
• At 5:1 Ranging: ±0.50% FSO/100 °F
Static Accuracy (bfsl) (Hysteresis, Non-linearity & repeatability @ +70 °F)

Standard: ±0.25% FSO
Improved: ±0.1% FSO
Zero Balance and FSO: ±0.5% FSO at +70 °F

Pressure Ranges

• 0-15 PSI thru 0-100K PSIS, PSIA, PSIV, PSIG
(1 BAR V thru 6,895 BAR)

• Range Adjustments: 5:1 for ranges 0-5 PSI thru 0-100K PSI
(0.3 BAR thru 6,895 BAR)

Standard configurations shown.
Please consult factory for other options.

All specifications are for reference purposes only. In the interests of continuous product improvement, all specifications are subject to change without notice. Please contact
GP:50 for assistance with your application.

© 2015 GP :50 NY Ltd. | 2770 Long Rd, Grand Island, NY 14072 USA Web: www.gp50.com

Tel: +1.716.773.9300 Fax: +1.716.773.5019 Email: [email protected]

Field Rangeable Process Pressure Transmitter

model 1171

FEATURES:

• Magnetic coupling provides field calibration with 5:1
turndown ratio

• 0 to 15 PSIV thru 0-100K PSISG, PSIA (1 BAR V thru 6895 BAR)
• 4-20 mA (loop powered) output
• FM, CSA intrinsically safe and explosion proof ratings
• IP67 & NEMA 6 rated housing

Model 1171 APPLICATIONS:
Field Rangeable Process Pressure Transmitter
• Offshore rigs and pumping platforms
• Pipelines and processing
• Shipboard and marine
• Plastics and polymer processing
• Pulp and paper

product overview:

The Model 1171 series from GP:50 is a rugged, hermetically sealed
pressure transmitter which features magnetic coupling adjusts for full
field calibration with 5:1 turndown ratio. Their compact, corrosion-
resistant, all-welded stainless steel construction provides reliable,
maintenance-free service life within harsh marine and offshore oil
and gas environments.

field options:

• Magnetically-coupled zero and span adjusts
• 5:1 turndown ratio, both fine and coarse
• Shunt calibration
• Hermetically sealed design

© 2014 GP :50 NY Ltd. | 2770 Long Road, Grand Island, NY 14072 USA Web: www.gp50.com A5SL-041

Tel: +1.716.773.9300 Fax: +1.716.773.5019 Email: [email protected] REV-A

GP:50 model 1171

Dimensional Drawing

All dimensions are in inches (mm)

STANDARD WIRING F-250-C MAGNETICALLY
COUPLED ADJUSTS
Ø1.50
WIRE MODEL [38.10] SHUNT CAL. 12
1171
1/RED 3 COARSE ZERO FINE ZERO
2/BLK +EXC/SIG
3/GRN -EXC/SIG SPAN
CASE GND
4

5.68
[144.40]

Reference Specifications Mechanical

ELECTRICAL • Process connection:
0 thru 15K PSI: 1/4” NPT (F)
• Supply Voltage: 9 to 36 Vdc 20K thru 50K PSI: Autoclave type F-250-C
• Output Signal: 4-20 mA, two-wire loop powered 60K thru 75K PSI: Autoclave type F-312-C150
• Load Impedance: 500 Ω
• Insulation Resistance: Better than 10 MΩ at 50 Vdc • Proof Pressure:
• Circuit Protection: Reverse polarity above 45 V to 20 A at (0 thru 15K PSI) 2X FSO or 20K PSI (1,379 BAR),
whichever is less
0.02 milliseconds (20K to 100K PSISG,A) 1.2X FSO or 125K PSI (8,618 BAR),
• Response Time: 5 ms, 10 to 90% FSPR whichever is less
• Connection: 1/2” NPT (M) conduit with 6 ft 18 AWG
• Burst Pressure:
multi-conductor cable 15 thru 50 PSI: 250 PSI (17 BAR)
• Enclosure Classification: IP67 75 thru 15K PSIS: 5X FSO or 22.5K PSIG (1,551 BAR),
whichever is less
Static Accuracy (BFSL) (Hysteresis, Non-linearity & repeatability @ +70 °F) 20K thru 100K PSIS: 1.5X FSO or 125K PSIG (8,618 BAR),
whichever is less
• >0.25% FSO
• Longterm Stability: 0.25% FSPR over six months
approvals • Weight: <28 oz (0.8 kg)

• FM/CSA Explosion Proof: Pressure Ranges
Class I, II, III Division I / Groups A, B, C, D, E, F, G
(FM Standard / CSA requires P option code) • 0 to 15 PSIV, 0 to 2 PSIG, A thru 0 to 100K PSISG, PSIA
(1 BAR V thru 6,895 BAR)
• FM/CSA Intrinsically Safe:
Class I, II, III Division I / Groups A, B, C, D, E, F, G • 5:1 on ranges >5 PSI (0.3 BAR)

• CE Compliant THERMAL SPECIFICATIONS
• EMC 89/336/EEC
• PED 97/23/EC • Compensated: 0 to +185 °F (-17.8 °C to +85 °C)
• Operating Ambient: -10 °F to +185 °F (-23 °C to +85 °C)
materials of construction • Effect on Zero/Span: <±1.0% FSO/100 °F
• At 5:1 Ranging: <3.5% FSO/100 °F
• Wetted Parts: 17-4 PH stainless steel (other options available) • Zero Balance: Fine and course adjustable
• Housing: 316L stainless steel
• Bonded foil strain gauge

Standard configurations shown.
Please consult factory for other options.

All specifications are for reference purposes only. In the interests of continuous product improvement, all specifications are subject to change without notice. Please contact
GP:50 for assistance with your application.

© 2014 GP :50 NY Ltd. | 2770 Long Rd, Grand Island, NY 14072 USA Web: www.gp50.com

Tel: +1.716.773.9300 Fax: +1.716.773.5019 Email: [email protected]

Flush Mount Pressure TransMITTer

model 240/340-im

FEATURES:

• Flush faced sensor minimizes media plugging and damage
• Compact 1” diameter
• Rugged, all-welded stainless steel design
• No zero offset from installation
• 5X proof pressure

APPLICATIONS:

• Wastewater treatment
• Onboard vehicles
• Skidded systems
• Sludge and slurries
• Adhesives and paints
• Pump suction and discharge lines of blender and Frack trucks
• Corrosive and higher viscosity media

Model 340-IM product overview:
Flush Mount Design
The Model 40-IM series from GP:50 is a flush face mounted
industrial pressure transmitter. It is expressly designed for higher
viscosity media, particularly where such media can otherwise clog
or damage traditional non-flush port sensor designs. The rugged,
all-welded, Inconel design of the 40-IM series allows for greater
compatibility with corrosive media. No zero offset is caused during
sensor installation.

FIELD OPTIONS:

• Direct NPT or flanged process mounting
• Select electrical connectors
• 4-20 mA or 0-5Vdc output

available APPROVALS:

• ATEX & IEC Hazardous approvals
• FM & CSA Pending

© 2015 GP :50 NY Ltd. | 2770 Long Road, Grand Island, NY 14072 USA Web: www.gp50.com A5SL-067

Tel: +1.716.773.9300 Fax: +1.716.773.5019 Email: [email protected] REV-A

GP:50 model 240/340-im

Dimensional Drawing

All dimensions are in inches (mm)

2.95 [75.05]

STANDARD WIRING 1/2" NPT(M)

PIN MODEL Ø1.00
340IM [25.40]
A/1/RED
B/2/GRN +EXC/SIG
C/3/WHT N/C
D/4/BLK N/C
E/5/BLU
F/6/BRN -EXC/SIG
N/C
N/C

Reference Specifications Mechanical

ELECTRICAL • Process Connection: 1/2” NPT (M)
• Proof Pressure: 5X FSO or 2K PSI (138 BAR),
• Supply Voltage: 9.0 to 40 Vdc
• Output Signal: 4-20 mA whichever is less
• Load Impedance: 1,350 Ω max. at 36 Vdc and • Burst Pressure: 7X FSO 3.5K PSI (242 BAR),

750 Ω max. Vdc whichever is less
• Zero Balance: ±2% FSO at 70 °F • Burst Pressure: 0-50 thru 0-500 PSI (3.5 thru 35 BAR)
• Insulation Resistance: > 10 MΩ at 50 Vdc and 70 °F
• Connection: 1/2” NPT (M) conduit with 36” cable leads or gauge, sealed gauge, absolute
• Environmental: Design to meet IP67 (Some options may affect
6-pin Bendix connector
this. Consult factory if critical.)
Materials of construction
TemperaturE
• Wetted Parts: Inconel 718
• Housing: 316 stainless steel • Compensated: 0 °F to +180 °F (-18 °C to +82 °C)
• Operating Ambient: -20 °F to +190 °F (-29 °C to +88 °C)
Static Accuracy (RSS) (Hysteresis, Non-linearity & repeatability @ +70 °F) • Maximum Operating Process: +250 °F (+121 °C)
• Effect on Zero/Span: <±2.0% FSO/100 °F
Standard: ±0.5% FSO
Improved: ±0.2% FSO

Standard configurations shown.
Please consult factory for other options.

All specifications are for reference purposes only. In the interests of continuous product improvement, all specifications are subject to change without notice. Please contact
GP:50 for assistance with your application.

© 2015 GP :50 NY Ltd. | 2770 Long Rd, Grand Island, NY 14072 USA Web: www.gp50.com

Tel: +1.716.773.9300 Fax: +1.716.773.5019 Email: [email protected]



































Dimensional Drawing gp:50 model 7500-9000

All dimensions are in inches (mm) 13.41 [340.61]

10.43 [264.92]

STANDARD WIRING

PIN MODEL DESCRIPTION Ø11.31* Ø6.0
7500-9000 [287.27] [152.27]
1 +EXC/SIG PRESSURE &
TEMPERATURE
2 -EXC/SIG
4-20mAdc/HART,
8 -EXC/SIG PRESSURE LOOP

3,4,5,6,7, 4-20mAdc/HART,
9, 10, 11, 12 TEMPERATURE LOOP

N/C N/A

MSSL-12-FCR-PBOF

* VARIES BY FLANGE TYPE 2.24 [56.90]
2.98 [75.69]
Reference Specifications
Mechanical
ELECTRICAL
• Proof Pressure: 1.5X pressure range
• Excitation Voltage: • Burst Pressure: 2.5X pressure range
12 to 36 Vdc • API Flange:
18 to 36 Vdc for HART communication (250 Ω load required)
2-1/16” thru 4-1/16”
• Output Signal: Flush or extended nose versions
4-20 mA both pressure and temperature
HART optional Pressure Ranges

• Zero Balance: 0 to 5K thru 0 to 25K PSI (345 thru 1,724 BAR)
±0.5% FSO pressure and temperature
Thermal Specifications
• Span:
±0.5% FSO pressure and temperature • Compensated:
+32 °F to +392 °F (0 °C up to +200 °C)
• Stability:
±0.5% FSO/year • Operating:
Electronics: +15 °F to +185 °F (-10 °C to +85 °C)
• Connection: HART: +15 °F to +160 °F (-10 °C to +70 °C)
MSSL-12-FCR-PBOF
• Process: +15 °F to +392 °F (-10 °C to +200 °C)
Materials of construction • Effect on Zero/Span: ±0.5% FSO per CTR

• Wetted Parts: optional variations
718 Inconel & 4130
(optional Inconel or Hastelloy inlay) • Consult factory

Static Accuracy (rss) (Hysteresis, Non-linearity & repeatability @ +70 °F)

±0.2% FSO
(optional ±0.1% FSO)

Standard configurations shown.
Please consult factory for other options.

All specifications are for reference purposes only. In the interests of continuous product improvement, all specifications are subject to change without notice. Please contact
GP:50 for assistance with your application.

© 2015 GP :50 NY Ltd. | 2770 Long Rd, Grand Island, NY 14072 USA Web: www.gp50.com

Tel: +1.716.773.9300 Fax: +1.716.773.5019 Email: [email protected]

ROV SubSea Pressure Transducer

Model 7500-M254

FEATURES:

• Subsea depth rated to 30K ft WC (9,144 meters)
• Differential design for sea depth reference
• ±0.2% FSO accuracy
• Operating ranges to 10K PSI (689 BAR)

APPLICATIONS:

• ROV
• AUV
• Submarine
• Oil & gas subsea wellhead control systems

Model 7500-M254 product overview:
ROV Subsea Pressure Transducer
The 7500-M254 from GP:50 is a subsea pressure transducer,
designed for use within remote or unmanned vehicles. Its open
reference provides for sea depth pressure. When used in a non-
conductive fluid bladder, the transducer also provides a gauge
process pressure. In addition to ROV applications, the compact size
and sea rated construction of the 7500-M254 make it ideal for the
effective monitoring of subsea oilfield wellhead control systems.

© 2014 GP :50 NY Ltd. | 2770 Long Road, Grand Island, NY 14072 USA Web: www.gp50.com A5SL-033

Tel: +1.716.773.9300 Fax: +1.716.773.5019 Email: [email protected] REV-A

GP:50 Model 7500-M254

Dimensional Drawing

All dimensions are in inches (mm)

STANDARD WIRING SAE
AS4320-04
PIN MODEL
7500-M254 Ø1.00
[25.40]
A/1 +EXC/SIG Ø1.18
[29.97]
B/2 N/C

C/3 N/C

D/4 -EXC/SIG

E/5 N/C

0.08 [2.03]

2.52 [63.95]

Reference Specifications Mechanical

ELECTRICAL • Process connection: SAE AS4320-04 (M) (7/16-20 UNF)
• Proof Pressure: 2X range
• Excitation Voltage: 9 to 36 Vdc • Burst Pressure: 3X range
• Output Signal: 4-20 mA • Approximate Weight: 0.3 lb (127 gm)

Optional mV/V or 0 to 5 Vdc Pressure Ranges
• Connection: High-temperature solder J-hook connection
• 500 PSI to 10K PSI (34 to 689 BAR)
Materials of construction
Thermal Specifications
•Wetted Parts: Inconel 718
• Housing: 316L stainless steel • Zero balance and span: ±0.5% FSO
• Compensated (ambient): +35 °F to +170 °F
Static Accuracy (RSS) (Hysteresis, Non-linearity & repeatability @ +70 °F)
(+23 °C to +205 °C)
±0.2% FSO • Operating (ambient): -20 °F to +190 °F (-4 °C to +205 °C)
• Storage: -65 °F to +250 °F (-54 °C to +121 °C)*

*condensation free environment

Standard configurations shown.
Please consult factory for other options.

All specifications are for reference purposes only. In the interests of continuous product improvement, all specifications are subject to change without notice. Please contact
GP:50 for assistance with your application.

© 2014 GP :50 NY Ltd. | 2770 Long Rd, Grand Island, NY 14072 USA Web: www.gp50.com

Tel: +1.716.773.9300 Fax: +1.716.773.5019 Email: [email protected]

Hazardous locations PRESSURE TRANSMITTER

model 240/340 AI/AN

Model 240/340 AI/AN FEATURES:
Hazardous Locations Pressure Transmitter
• Compact design for easier installation
Current Approval: • All stainless steel welded construction
• ATEX & IEC Approvals
Pending Approval: • Improved accuracy and thermally compensated
• Ranges 0 to 1 PSI thru 0 to 30K PSI (69 Mbar to 2068 Bar)
• FM, & CSA Approvals Pending

APPLICATIONS:

• Natural Gas Compression
• Rig safety systems
• Well head control
• Control panels
• On-board transmission & engine monitoring

product overview:

GP:50’s Model 40 series incorporates over 25 years of oil field
proven design in a 1” diameter package. The 40 series provides
a rugged solution for hazardous approved areas, especially
where space constraints are a concern. Its all welded stainless steel
design will provide years of reliable service in some of the harshest
environments.

approvalS:

Currently Available:
• ATEX/IEC Intrinsically Safe: II 1 G Ex ia IIC T5 Ga
• ATEX Zone 2: II 3 G Ex nA/ic IIC T5 Gc
Pending:
• IEC Zone 2: II 3 G Ex nA/ic IIC T5 Gc
• FM/CSA: Intrinsically Safe: Class I, Division 1, Groups A-G, T5,

Ex ia IIC T5
• FM/CSA: Division/ Zone 2: Class I Division 2, Groups A-G, T5,

Ex nC/nA/nL T5

© 2015 GP :50 NY Ltd. | 2770 Long Road, Grand Island, NY 14072 USA Web: www.gp50.com A5SL-077

Tel: +1.716.773.9300 Fax: +1.716.773.5019 Email: [email protected] REV-B

GP:50 model 240/340 Ai/AN HAZARDOUS LOCATIONS

Drawing

All dimensions are in inches (mm)

Reference Specifications

ELECTRICAL Static Accuracy (Hysteresis, Non-linearity & repeatability @ +70 °F)

• Excitation Voltage: • Standard ±0.25% FSO
(Model 240) 10.5 to 32 Vdc • Optional ±0.15%
(Model 340) 10 to 28 Vdc
Zero Balance and FSO: ±1% FSO at +70 °F
• Output Signal:
(Model 240) 0-5 Vdc Mechanical
(Model 340) 4-20 mA
• Process Connection: 1/4” NPT (M), options available
• Load Impedance: • Proof Pressure: 2X FSO
(Model 240) 50K Ω max. 24 Vdc • Burst Pressure: 5X FSO
(Model 340) 750 Ω max. 24 Vdc • Approximate Weight: 0.5 lb nominal, options may

• Input Current: increase weight
(Model 240) 8 mA nominal • Environmental: Design to meet IP67 (Some options may affect

• Insulation Resistance: >10 MΩ at 50 Vdc and +70 °F this. Consult factory if critical.)
• EMI Specs: EMC directive 2004/108/EC, EN 61326 emission
• Connection: 1/2” NPT M conduit w/ 6ft 18 AWG Pressure Ranges

multi-conductor cable • 0 to 1 PSI thru 0 to 30K PSI, some options may affect range
(PSIG, PSIS, PSIA, PSIV & compound ranges available)
Materials of construction
Thermal Specifications
• Wetted Parts:
• Compensated: 0 °F to +180 °F (-17.7 °C to +82 °C)
≤2000 PSI 316L SST w/silicon oil fill (Fomblin oil fill available) • Operating: -40 °F to +176 °F (-40 °C to +80 °C)
>2000 PSI 17-4 PH SST (Hastelloy and Inconel available) • Storage: -65 °F to +250 °F (-53 °C to +121 °C)
• Housing: 316 stainless steel • Effect on Zero/Span: ±1.0% FSO/100 °F

Standard configurations shown.
Please consult factory for other options.

All specifications are for reference purposes only. In the interests of continuous product improvement, all specifications are subject to change without notice. Please contact
GP:50 for assistance with your application.

© 2015 GP :50 NY Ltd. | 2770 Long Rd, Grand Island, NY 14072 USA Web: www.gp50.com

Tel: +1.716.773.9300 Fax: +1.716.773.5019 Email: [email protected]