Appendix A A -2 A.5 Parameter range parameter reference range（cell/µL） general man woman child RBC 0-7 0-5 0-7 0-6 WBC 0-12 0-6 0-12 0-4 WBCC 0-1 0-1 0-1 0-1 EC 0-28 0-4 0-28 0-4 SRC 0-2 0-2 0-2 0-2 HYA Cast 0-1 0-1 0-1 0-1 UNCC 0-0 0-0 0-0 0-0 CRYS 0-3 0-3 0-3 0-3 YST 0-3 0-3 0-3 0-3 A.6 Carryover The carryover of all analysis parameters does not exceed 1 cell/µL. A.7 Input/output devices Input device: keyboard, mouse Output device: display, printer A.8 Display resolution display resolution: ≥1440×900 A.9 Ports of the analyzer The ports of the analyzer include: Communication port: USB interface, serial port Power port: power cord Fluidic inlet: liquid detector, fluidic pipe A.10 Power supply Name Voltage Input power Frequency Analyzer (100V-240V～)±10% 350VA (50/60Hz)±1Hz A.11 Operating environment Indoor use Altitude: do not exceed 2000m Temperature: 5℃- 40℃ Relative humidity: ≤80% Rated contamination class: contamination class 2
Appendix A A -3 Note: ‘contamination class 2’ means there is usually only non-conductivity pollution, but there might be occasionally short-time conductive due to agglomeration. A.12 Electromagnetic compatibility The analyzer complies with the emission and immunity requirements described in EN 61326-1:2006 and EN 61326-2-6:2006. The analyzer has been designed and tested to CISPR 11 Class A. In a domestic environment it may cause radio interference, in which case you may need to take measures to mitigate the interference. A.13 Dimension and weight Analyzer Length (mm) 740 Width (mm) 600 Height (mm) 525 Weight (Kg) 65 A.14 Bar code specification 1. Acceptable bar codes The bar codes accepted by the instrument are as shown in the figure below Barcode type Check digit Number of digits CODE128 Self-contained Maximum 30 digits (sample ID number) CODE93 Self-contained Maximum 30 digits (sample ID number) UPC/EAN Self-contained Fixed length: 8 digits or 13 digits ITF Not used Maximum 30 digits (sample ID number) CODE39 Not used Maximum 30 digits (sample ID number) CODABAR Not used Maximum 30 digits (sample ID number) 2. Bar code parameters Bar code height: A≥10mm Bar code label width: B≤45mm Blank area on two sides of the bar code: C≥5mm Bar code width ratio: 2.5: 1 - 3.0: 1 Narrow bar code width: above 0.203mm