Sea Breeze - Hoffman Fabrics

Sea Breeze

featuring the Bali Paradise collection by Hoffman California Fabrics
67 x 80” finished size ~ quilt design by Denise Russart @2015

Cutting Instructions

Fabric 1: L3382 207-Sea Breeze

Cut (4) strips 7.5” x WOF.

Fabric 2: L3385 207-Sea Breeze

Cut (2) strips 4.25” x WOF.
Cut (4) strips 4.5” x WOF; SC (10) 12.5” x 4.5”

Fabric 3: L3383 207-Sea Breeze

Cut (4) strips 4.5” x WOF; SC (10) 12.5” x 4.5”.
Cut (2) strips 4.25” x WOF.

Fabric 4: L3384 207-Sea Breeze

Cut (8) strips 5.5” x WOF (Border 2)

Fabric 5: L3386 207-Sea Breeze

Cut (3) strips 1.75” x WOF; set aside (1) strip. From remaining (2) strips SC (30) 1.75” x 1.75” squares.
Cut (8) strips 1.75” x WOF (Border 1)
Cut (8) strips 2.5” x WOF (Binding)

Fabric 6: 1895 500-Gardenia

Cut (4) strips 1.75” x WOF
Cut (1) strip 4.25” x WOF
Cut (1) strip 7.5” x WOF
Cut (3) strips 12.5” x WOF; SC (49) 1.75 x 12.5” sections (sashing)

Piecing Instructions
Using one 4.25” Fabric 3 strip, one 1.75” Fabric 6 strip, and one 7.5” Fabric 1 strip – stitch
together lengthwise in order shown at left and create a Strip Set.
Repeat this step so you have a total of two like Strip Sets. Sub-cut these two Strip Sets into
(10) 7.25” wide segments.

Repeat the steps above using one 4.25” Fabric 2 strip, one 1.75” Fabric 6 strip, and one
7.5” Fabric 1 strip. Stitch into Strip Set as shown at left. Repeat to make two like Strip
Sets. Sub-cut these two Strip Sets into ten (10) 7.25” wide segments.

Using one 7.5” Fabric 6 strip, one 1.75” Fabric 5 strip and one 4.25” Fabric 6 strip, stitch together
lengthwise in order shown to make one strip set. Sub-cut this Strip Set into twenty (20) 1.75” wide
segments.

Stitch segments made in last step to 4.5” x 12.5”
Fabrics 2 and 3 sections, making ten (10) to match
each image at left.

Stitch sections made in step one to sections made in
previous step to make ten (10) blocks to match each
image at left.

Following main quilt diagram,
lay out blocks in five horizontal
rows of four blocks each, using
the diagram to get blocks
turned to proper orientation.
Join blocks to each other in
horizontal rows adding a 1.75”
x 12.5” Fabric 6 sashing strip
between each block and at left
and right edges of row.

Make six sashing
strips to match image using 1.75” x 1.75” Fabric 5 squares and 1.75” x 12.5” Fabric 6 sections. Following
main quilt image, lay out rows with sashing strips between and join together. Add sashing strip to top and
bottom of quilt.

Border 1: Join two 1.75” Fabric 5 border strips end to end to make one border section. Repeat for a total
of four like border sections. Trim two of these border sections 68.0” long and add to left and right side
of quilt.

Trim remaining two sections 57.25” and add to top and bottom of quilt.

Border 2: Join border strips into pairs end to end using straight seam (rather than 45 degree angle to
join them to make most of fabric strip). Make a total of four like border sections. Trim two sections
70.5” long and add to left and right side of quilt. Trim remaining two sections 67.25” long and add to top
and bottom.

Binding: Join all binding strips on 45 degree angle. Trim seam allowance, press seams open and then
press binding strip in half lengthwise to make double-fold binding.

Backing: Cut backing fabric into two 2.5 yard sections and seam lengthwise so the seam will run
vertically along center back of quilt.

Layer, quilt and enjoy!