ebook kettle.pdf

KETTLE

mpu 22053

English For Digital Technology

PREPARED FOR :
MADAM ANIS NADIA
BINTI AHMAD

Prepared by : Nur Najla Binti Khairul Azrill
18ddt21f2002

Nurul Azeana binti Sulaiman
18ddt21f2036

Afifa Qhomariah binti Abdul Ghani
18ddt21f2030

Nurul Annisa Binti Azmi
18ddt21f2026

Model no : 359WP7U

*Before opperating the alliance
please read the manual first

2

PRODUCT INVENTORY

CONTENT PAGE

IMPORTANT SAFEGUARDS 4
PARTS DESCRIPTION
5

OPERATION DESCRIPTION

MAINTENANCE INSTRUCTION

SPECIFICATION

FUNCTION

WARRANTY

Read all instructions. Use this product only as described in this manual. Keep the
packaging material (cardboard, plastic, etc.) out of the reach of children (danger of

asphyxiation or injury).

To protect against fire, electrical shock, and injury to persons do not immerse cord,
plugs, or

Kettle/base in water or other liquid. Do not place anything on top of the lid. Do not
open the lid during operation as scalding may occur. Do not move the appliance
while it is switched on. Do not operate Kettle on an inclined surface. Always use
the Kettle on a dry, level surface well away from the edge of any countertop. Do
not leave the appliance unattended when in use. Do not operate any appliance

with a damaged cord or plug, or after the appliance has malfunctioned or has
been damaged in any way or is not operating properly.



Customer Service at (800) 545-4411. Do not return to the store. When using this
appliance, provide adequate air space above and on all sides for circulation. Do

not use under cabinetry. Do not overfill Kettle past the “MAX” fill line. Do not
under-fill beneath the “MIN” line. Do not allow Kettle to boil dry.

Do not place this appliance on or near a hot gas or electric burner, or where it
could touch a heated oven. Do not touch hot surfaces, including the glass or metal

areas on the Kettle or the inside of the base after use. Touch only the handle and
on/off button. Handle the Kettle with care at all times. Do

not use Kettle if it is cracked or the handle is loose. Do not allow glass kettle to
come in contact with hard or sharp material. The glass kettle is fragile and can

break if dropped or struck with hard/sharp material.

Take care to keep fingers, hair, clothing, and other objects clear while removing
the Kettle from and returning it to the base. Do not let the cord hang over the
edge of a table or counter where it can be pulled on by children or tripped over
unintentionally. Do not let the cord hang over or touch hot surfaces or become

knotted.

The use of accessory attachments not recommended by the appliance
manufacturer may result in fire, electric shock, or personal injury. Close supervision

is necessary when any appliance is used by or near children. Unplug from outlet
when not in use and before cleaning. Allow cooling before putting on or taking off

parts, and before cleaning the appliance. Do not put any substances other than
water and descaling products into the Kettle. Never attempt to cook or warm food
in the Kettle. Always attach the plug to the appliance first, then plug the cord into
the wall outlet. To disconnect, turn any control to “off,” then remove the plug from
the wall outlet. Do not touch the Kettle during a boiling cycle. Scalding may occur

if the lid is removed/opened during the boiling cycles. Do not use this appliance
for anything other than its intended use. Do not use outdoors.

This appliance is intended for household use only

4

HOW TO USE ELECTRIC KETTLE
1.Unboxing your product
2.Clean your kettle
3.Put the water in the kettle
4.Insert the plug into the hole in the wall
5.Put the kettle on the base
6.Adjust the temperature
7.Switch on the switch
8.Push the button on the kettle
9.Wait for boiling
10.The kettle will switch off automatically when the
water has come to boil




5

OPERATION DESCRIPTION
When the kettle is turned on, a large electric current flows through the

coil, or the ‘heating element’.
The coil has an electrical resistance (a measure of the difficulty to pass

an electric current through it). This resistance turns electrical energy
into heat as it passes through coil.

The heat brings the water inside it to boiling point.
Some kettles use a thermostat, which prompts them to switch off when

the water reaches the right temperature.
When a kettle is plugged into an electric outlet and switched on the

electric current flows through a metal coil, which is situated either
within or under the water. The coil is, in effect, a heating element and
its resistance (the material’s efforts to stop electricity flowing through

it) turns the electrical energy into heat.
Because a kettle is a sealed unit, the temperature rises quickly within

and pretty soon the water boils. So far, so simple. The main problem
with the electrical kettle concept has always been how to enable it to

switch itself off. In the past they didn’t and many a hotel was
evacuated when a left kettle boiled and boiled and set off the room’s

smoke detectors.
Now, all electric kettles have an automatic shut-off that stops heating

the water when they reach boiling point.



MAINTENANCE INSTRUCTION
Clean your electric kettle and its cartridges or filters regularly to keep

the appliance in top shape. Always use distilled water instead of tap
water to keep build-up to a minimum. Always empty the kettle after

each use; avoid letting water sit in it. Only heat as much water as
needed. Unplug unit before cleaning and allow unit to cool down.

6

7

FUNCTION

Step1: Fill It Up. First things first, you need to fill your
empty kettle with fresh water.
Step2: Set It on the Base. Now that the kettle is full, set
it on the base.
Step3: Turn the Kettle On.
Step4: Wait for the Water to Boil.
Step5: Serve and Done!.

8

WARRANTY

1. The product has 2 years warranty from the date of purchase.
2. The warranty shall not apply:
A. to any product subjected to misuse, alteration, act of God, improper
handling,
improper
transport, improper
testing or unauthorized repair;
B. to cosmetic problems or defects which result from normal wear and tear

under ordinary use yet
not affecting the

performance or use of the product;
C. if the product is disassembled or altered;
D. to any packing, transportation, export / import tax or any related expenses.
3. CUSTOMER MUST PRESENT THE SALES INVOICE OR RECEIPT FOR 2 YEARS

WARRANTY
SERVICES.
4. Please bring along the product and sales invoice or receipt to our services
center for warranty
services during office

hour:
Address : Unit A, 20/F, Yip Shing Industrial Centre, No.19, Yip Shing Street, Kwai

Chung.
Service Hotline : (852) 2428 1500
Service Hours: : 9:00am - 6:00pm
Monday-Friday : 9:00am - 4:00pm

Saturday : Closed
Sunday & Public Holiday







9