HUSQVARNA PROFFESIONAL CATALOG 2019

WALL & WIRE

PRIME High Frequency Power Packs

Husqvarna PP 220 Husqvarna PP 65 WALL & WIRE

Applications Applications

• Water-cooled electric high frequency power pack for • Electric power pack for Husqvarna's K 6500, K 6500 Ring, K
the WS 220 wall saw, DM 650 drill motor, K 6500, K 6500 6500 Chain and DM 650 high frequency products.
Ring and K 6500 Chain power cutters.
• Suitable for applications where easy transportation to and
• Perfect for applications that have mulitple cutting sites due around the job site is required.
to its low weight and compact design.
• Can be used in surroundings where water usage should be
Benefits kept at a minimum.

• A powerful, high frequency power pack providing fast and Benefits
accurate adjustment for each operating condition.
• Easy-to-carry and use due to its low weight and ergonomic
• Double connections make it possible to connect the design.
PP 220 to both a WS 220 and a DM 650 or K 6500
simultaneously. • Digital menu and display for efficient control and service of
the unit.
• Automatic detection and setup of connected equipment
and the power source make handling easy. • It can connect to both 3- and 1-phase power.
• It is air-cooled – the water connection is needed only for

the equipment when wet cutting.

Item No. PP 220 PP 65
List price
966563803 966563703
$7,657.00 $5,820.00

Technical specifications 22 (10) 22 (10)
8.7/4.7 (6.5/3.5) 8.7/4.7 (6.5/3.5)
Weight, lbs (kg) 10/16 10/16
Power output 3-phase/1-phase, hp (kW) 200-480/220-240 200-480/220-240
Rated current 3-phase/1-phase, amps 24 (10.8) 21 (9.5)
Voltage 3-phase/1-phase, V Water Air
Weight, lbs (kg) 101 (7) N/A
Cooling 0.9 (3,5) N/A
Water cooling pressure - max, PSI (bar) 77 (25) N/A
Water coolant flow min., g/m (l/min) 10 10
Max cooling water temperature at 0.9 G (3,5 l)/min, F (ºC) 10 10
Generator - 3 phase min., kW/kWA
Generator - single-phase 220V min., kW/kWA

DIAMOND BLADES - PAGE 106 101

Electric/Hydraulic Power Packs

WALL & WIRE Husqvarna PP 455 E Husqvarna PP 325 E

Applications Applications

• Ideal for cutting in concrete and steel with the WS 463 and • Power pack for surroundings where access to the work area
CS 2512. is limited.

Benefits • Supplies enough power to run the DM 406 H drill motor,
K 3600 or K 2500 power cutters.
• Water-cooled.
• WS 463 can easily be fastened to the power pack, Benefits

facilitating transport. • The light and compact design enables it to be used and
transported easily by one person.

Item No. PP 455 E PP 325 E
List price
965156605 965156406
$36,494.00 $10,249.00

Technical specifications 33 (25) 12.6 (9,3)
63A 16A
Power output, hp (kW) 480, 3-phase 480, 3-phase
Rated current, amps 310 (140) 205 (93)
Voltage, V 17 (65) 10 (40)
Weight, lbs (kg) 3300 (230) 2000 (140)
Flow, gpm (lpm) 17 (65) 10 (40)
Max pressure, psi (bar) 3300 (230) 2000 (140)
Max flow, gpm (lpm) 5.3 (20) 3.2 (12)
Maximum operating pressure, psi (bar) Yes Yes
Hydraulic tank capacity, gal (l) Water Water
Hydraulic hose assembly included 101 (7) 101 (7)
Cooling 1 (3,8) 1 (3,8)
Water cooling pressure - max, PSI (bar) 77 (25) 77 (25)
Water coolant flow min., g/m (l/min)
Max cooling water temperature at 0.9 G (3.5 l)/min, F Electric Electric
(ºC) 50/62.5 25/31.2
Engine
Generator - 3 phase min., kW/kWA

102 DIAMOND BLADES - PAGE 106

WALL & WIRE

Hydraulic Power Packs

Husqvarna PP 518

Applications

• Can power any hydraulic tool requiring 5, 8, or 10 gpm
flow at 2,000 psi.

• Supplies enough power to run the DM 406 H drill motor,
K 3600 or K 2500 power cutters.

Benefits

• Automatic power-on-demand saves fuel and adjusts for
different tools and hose lengths. It can be switched off for
constant power when desired.

WALL & WIRE

Item No. PP 518
List price
967153602
Technical specifications 8,351.00

Power, hp (kW)/engine manufacturer 18 (13.5)/Briggs & Stratton
Flow, gpm (lpm) 5, 8, 10 (20, 30, 40)
Max flow, gpm (lpm) 10 (40)
Maximum operating pressure, psi (bar) 2,000 (140)
Hydraulic tank capacity, gal (l) 2.6 (10)
Hydraulic hose assembly included Yes
Cooling Air
Engine Gas twin cylinder OHV, air-cooled,electric start
Hose set weight (with oil), lbs (kg) 22 (10)
Hose set (2 hoses included as standard) 1/2" (13cm) x 25 ft (7.5 m)
Hydraulic connections Flat faced couplers with dust caps
Hydraulic oil system capacity, gal (l) 4 (15)
Fuel capacity, gal (l) 3 (11.4)
Dimensions (L x W x H), in (mm) 35 x 21 x 29 (89 x 53 x 74)
Weight (dry), lbs (kg) 280 (127)
Weight (with oil), lbs (kg) 298 (135)

DIAMOND BLADES - PAGE 106 103

Husqvarna PP 490 HF, 440 HF, PP 220 & PP 65 Accessories

PP 490 PP 440 PP 220 PP 65

Battery for remote control 587311602 $291.00 X X X X
CANbus cable assembly 577059902 305.00 X X X
Cable, power connection from PP to saw 579164401 1,354.00 X X
Harness, wireless remote control 501793001 945.00 X X X
Socket, 16 amp female 531117199 X
5-pin socket, 32 amp female 70.00 X X
Wireless remote control 531117131 58.00 X X
578284802 1,821.00

Husqvarna PP 455 E and PP 325 E Accessories

WALL & WIRE CANbus cable 20' (6m) 531115012 $420.00 PP 455 E PP 325 E
CANbus cable 65' (20m) 531115101 673.00
Filter, hydraulic oil 531118142 125.00 X X
Filter, hydraulic oil 531118249 68.00 X X
X X
Hydraulic hose 1/2" x 26' (8m) 531115170 916.00 X
Hose set including couplings, 26' (8m) 531115190 2,456.00 X
Remote control 578327901 2,793.00 X
Socket, 16 amp female 531117199
5-pin socket, 63 amp female 531117132 70.00 X
Water hose connection 506748401 153.00 X
Water valve 506748301 120.00
114.00

Husqvarna PP 518 Accessories

Hydraulic hose 1/2" x 25' (7.6m) 510202306 $604.00 PP 518
Hydraulic hose 5/8" x 25' (7.6m) 510202308 787.00
Hydraulic hose 5/8" x 50' (15.2m) 510202310 1,011.00 X
X
X

104 DIAMOND BLADES - PAGE 106

WALL & WIRE

WALL & WIRE

DIAMOND BLADES - PAGE 106 105

106

WALL & WIRE

WALL & WIRE

WALL & WIRE

DIAMOND BLADES FOR WALL SAWING

Husqvarna’s wall saw blades have an advanced design, ensuring top performance in terms of product life and cutting speed. The
range has been developed specially for Husqvarna’s wall saws, but it covers most types of applications and machine
sizes. Available in diameters from 18" to 72".

PROFESSIONAL
For more information, see page 10

Application Chart.

WS220 WALL SAW HYDRAULIC HANDHELD
W1405
MATERIAL W1510 W1515 W1520 W1107 HH605 HH610 HH630
HH1410 HH1430
lll lll
HEAV I LY S T EEL R EI NFO R C E D C O N C R E T E lll lll lll lll lll lll lll l
lll lll
HARD CONCRETE / HARD BIRCK lll lll lll lll ll ll lll ll
l
CURED CONCRETE AND BRICK lll lll ll ll – ll lll
ll
CURED CONCRETE BRICK AND BLOCK ll ll –

l l l = Optimal  l l = Good  l = Acceptable  – = Not recommended

107

Husqvarna W1500 Series

.500" SERIES Z-EDGE SEGMENT DESIGN

• W1510: fastest cutting in heavy steel reinforced wall.
• W1515: fast cutting in heavy steel reinforcement with extended life.
• W1520: longer life blade for hard aggregate concrete/steel reinforcement.
• All blades are available upon request with Pentruder or GDM bolt hole

pattern.

WALL & WIRE Size - Inches (mm) Item no. Item no. Item no. List Price
W1510 W1515 W1520
24 (600) x .187 592880401 592880501 $1,424.00
24 (600) x .220 592880301 592880402 592880502 1,509.00
24 (600) x .235 592880302 592880403 592880503 1,602.00
24 (600) x .250 592880303 592880404 592880504 1,691.00
30 (762) x .187 592880304 592880405 592880505 1,766.00
30 (762) x .220 592880305 592880406 592880506 1,918.00
30 (762) x .235 592880306 592880407 592880507 1,998.00
30 (762) x .250 592880307 592880408 592880508 2,155.00
32 (813) x .187 592880308 592880409 592880509 2,090.00
32 (813) x .220 592880309 592880410 592880510 2,292.00
32 (813) x .235 592880310 592880411 592880511 2,332.00
32 (813) x .250 592880311 592880412 592880512 2,544.00
36 (914) x .187 592880312 592880413 592880513 2,306.00
36 (914) x .220 592880313 592880414 592880514 2,448.00
36 (914) x .235 592880314 592880415 592880515 2,600.00
36 (914) x .250 592880315 592880416 592880516 2,746.00
40 (1,016) x .220 592880316 3,533.00
42 (1,067) x .187 592880317 592880417 592880517 3,400.00
42 (1,067) x .220 592880318 592880418 592880518 3,533.00
42 (1,067) x .235 592880319 592880419 592880519 3,614.00
42 (1,067) x .250 592880320 592880420 592880520 3,684.00
48 (1,219) x .187 592880321 592880421 592880521 4,332.00
48 (1,219) x .220 592880322 592880422 592880522 4,478.00
48 (1,219) x .235 592880323 592880423 592880523 4,694.00
48 (1,219) x .250 592880324 4,835.00
54 (1,371) x .187 592880325 5,743.00
54 (1,371) x .220 592880326 5,911.00
54 (1,371) x .235 592880327 6,105.00
54 (1,371) x .250 592880328 6,358.00
60 (1,523) x .220 592880329 8,339.00
60 (1,523) x .235 592880330 8,339.00
63 (1,600) x .220 592880331 8,574.00
66 (1,676) x .220 592880335 8,810.00
66 (1,676) x .235 592880332 8,973.00
592880333

NOTE: All standard wall saw blade cores are machined with LYBHP bolt hole pattern. Additional arbor sizes and flush cut patterns available upon request.

108

WALL & WIRE

Husqvarna W1405

.400” SERIES DOUBLE NOTCH WALL SAW BLADES

• W1405: softer blade designed to cut reinforced concrete with a WS 220
• U se a specific bolt hole pattern on the WS 220 (SBHP)

Size - Inches (mm) Item No. List Price WALL & WIRE
SBHP (WS 220) $1,297.00
24 (600) x .165 1,424.00
24 (600) x .187 586351101 1,666.00
30 (762) x .165 586351301
30 (762) x .187 586351401 1,766.00
32 (813) x .235 586351501 2,331.00
36 (914) x .165 582368301 2,155.00
36 (914) x .187 586351601 2,301.00
586351701
List Price
Husqvarna W1500 Series Silent $1,645.00
1,844.00
.500" SERIES SILENT CORE WALL SAW BLADES
• All silent blades are made with sandwich steel core technology. 2,113.00
2,359.00
Size - Inches (mm) Item No. 2,676.00
W1510 S 4,091.00
24 (600) x .220 593271001
24 (600) x .250 593271101
30 (762) x .220 593271201
30 (762) x .250 593271301
36 (914) x .220 593271401
36 (914) x .250 593271501

Bolt Hole Patterns: Longyear Pentruder

GDM

109

Husqvarna W1107 medium reinforcement, fast cutting and long life.
W3 is for general purpose. Works well for most w
.400" SERIES WIDE NOTCH WALL SAW BLADES reinforcement, fast cutting and longer life.
Total Segment Height: W1, W2, W3 is .390" (.315"
• W1107: designed for fast cutting in hard reinforced concrete. base)
Total Segment Height: W0 is .470" (.395" diamond
All wall saw blades have split segments which pro
W0, W1, W2, and W3 specs have split sandwich se
provides better tracking and maintains side cleara
blade.

Wall Saw Blades

Bolt Hole Pattern Wide Notch Narrow NoAPPLICATION SPECS
- LYBHP (1" Arbor)
WALL SAW DIAMOND
.437" W0 is for low power
Bolt Hole WET CUTTING hard aggregate concr
1" Arbor W1 is for medium rei
Size - Inches (mm) Item No. Hole List Price cutting lightly reinfor
W1107 W2 is for general pur
WALL & WIRE 18 (450) x .220 542777041 $1,035.00 medium reinforcemen
18 (450) x .250 542755223 1,170.00 W3 is for general pur
24 (600) x .187 542755213 1,308.00 reinforcement, fast cu
24 (600) x .220 Total Segment Height
24 (600) x .235 base)
24 (600) x .250 Total Segment Height
26 (660) x .187
26 (660) x .220 542775788 1,399.00 All wall saw blades ha
26 (660) x .250 W0, W1, W2, and W3
30 (762) x .187 542773556 1,492.00 provides better tracki
30 (762) x .220
30 (762) x .235 542775789 1,586.00 Wide Notch Sandwich Segmentblade.
30 (762) x .250 542755214 3.5" Diameter 1,442.00
32 (813) x .187
32 (813) x .220 542775936 cut Bolt Hole Circle 1,552.00 Bolt Hole Pattern Wide No
32 (813) x .250 1,745.00 - LYBHP (1" Arbor)
36 (914) x .187 554422775755291175Flush pattern 1,648.00
36 (914) x .220 .437"
36 (914) x .235 Bolt Hole
36 (914) x .250 M1,79i6l.l0e0 nium® Wide Notch1" Arbor
40 (1,016) x .220 542775790 Hole
42 (1,067) x .187
42 (1,067) x .220 542773557 1,879.00
42 (1,0647) x .235
42 (1,067) x .250 542775791 1,994.00
48 (1,219) x .187
48 (1,219) x .220 542755216 21,,8W08291e..00t00 Cutting Professional
48 (1,219) x .235 542775797
54 (1,371) x .220
54 (1,371) x .235 542775798 2S,2iz71e.00 3.5" Diameter Item No.
60 (1,523) x .220 542755217 22I,n,2127c48h..00e00s (mm)
60 (1,523) x .235 542775792 Bolt Hole Circle
66 (1,676) x .220 542773558
66 (1,676) x .235 542775793 Flush cut pattern
72 (1,829) x .235 542776829
2,426.00 360 Series BoWltOHole Pattern MilWlen1ium® Wide N

2,570.00 LYBHP (1" Arbor)

3,W477I.D00E NOTCH WITH LYBHP (1" ARBOR) Wet Cutting P

542755219 3,22547.(06000) x .187 772400 Si7ze70426 7
542776736 33,,25447477..(0060000) x .220 772401 In7ch7e0s 4(m2m7) 7
542766312
542777070 32,6417.(06000) x .250 772977 W
542755220
542775943 4,24261.(06050) x .187 ♦WIDE NOTCH WITH LYBHP
542766912
542775944 44,,65257680..(0060050) x .220 772402 274 7(60004) 2x 8.187 777
542767140 6,03302.(07050) x .187
542777244 6,31209.(07050) x .220 772403 22744 7((66000004)) 2xx 9..225200 77777
542751701 772404 276 7(60504) 3x 0.187 777
542755208 772405 23706 7((67055004)) 3xx 1..212807 77777
542751702
542773753 8,31862.(09000) x .187 772406 370 7(70504) 3x 2.220 777
88,,93359680..(0090000) x .220 36 (900) x .187 77
9,04925.(010050) x .187 772407
779387 376 7(90004) 3x 3.220 777
472 7(1005403) x4.187 777

42 (1050) x .220 77
9,94420.(010050) x .220 772408 Blad7e7s 0co4m3e5standard with 1"7
Blades come standard with 1" arbor. Flush LAcYduBdHtitPioc-no1a"nl ssfitzaiegnsduaavrradailaatrbiboleonru-psLoo

LYBHP - 1" standard arbor - Longyear (flushOthceur ta)rbborocoltnfhiguoraletiopnsaatn

Additional sizes available upon request.

Other arbor configu7ra8tions and flush cut bolt hole patterns ar

78

110

Hydraulic Handheld Blades WALL & WIRE

Husqvarna HH1400 Series WET CUTTING
List Price
.400" SERIES HYDRAULIC HAND SAW BLADES $474.00
• HH1410: designed for fast cutting in hard concrete. 515.00
• HH1430: designed for longer life in medium to hard reinforced concrete. 644.00
• LYBHP standard in 20", 20-5/8" and 24" hand saw blades. 700.00
731.00
Size - Inches (mm) Item No. 917.00 WALL & WIRE
Narrow notch
14 (350) x .140 HH1410 HH1430
16 (400) x .140  589648701 589649101
16 (400) x .165  589648801 582409301
20 (508) x .140  589648901 589649201
20-5/8 (516) x .140  589649001 589649301
24 (600) x .140 587298103
587298101 501402601
587384301

Husqvarna HH600 Series

.400" SERIES HYDRAULIC HAND SAW BLADES

• HH605: fast cutting speed in highly reinforced concrete.
• HH610: hard reinforced concrete.
• HH630: longer life in hard concrete.
• LYBHP standard in 20", 20-5/8" and 24" hand saw blades.

Size - Inches (mm) HH605 Item No. HH630 WET CUTTING
Narrow notch 542750626 HH610 542761219 List Price
14 (350) x .125 542750628 542761199 542761221
16 (400) x .125 542773781 542761201 $474.00
16 (400) x .165 542774262 542773662 515.00
16 (400) x .220 542750629 542776308 542761223 644.00
16 (400) x .250 542750630 542774109 542761224 747.00
18 (450) x .125 542750631 542775267 542761225 801.00
20 (508) x .125 542750632 542761203 542761226 592.00
20 (508) x .140 542750633 542761204 542761227 670.00
20-5/8 (516) x .125 542750634 542761205 542761228 700.00
20-5/8 (516) x .140 542750635 542761206 700.00
24 (600) x .125 542761207 731.00
24 (600) x .140 542761208 876.00
917.00

111

WALL & WIRE NO DEPTH TOO GREAT FOR
WIRE SAWING

Our premium quality wire sawing systems are ideally designed for high productivity. They are flexible, powerful and easy to
use, which helps to complete the job quickly and profitably - with great results. Thanks to a clever design that increases the
friction between the wire and the drive wheel, your wire sawing becomes effortless and efficient. The modular pulley system
can easily adapt to a wide range of applications, so there is virtually no limit in terms of sawing depth or profile. Also our
diamond wires enable you to cut very c­ omplex structures, both in steel and heavily reinforced concrete.

Range overview

Husqvarna offers two wire sawing systems with different setups: Husqvarna CS 2512 is powered by an integrated
hydraulic 26.8 hp motor, weighs 331 lbs. and has 50 ft. wire magazine. Husqvarna CS 10 is powered by the high-
frequency electric sawheads of either the 25.4 hp WS 482 HF, the 17.4 hp WS 440 HF or WS 463 wall sawing systems. It
weighs 243 lbs. without sawhead and has 38 ft wire magazine.

CAPACITY Husqvarna’s wire saw has a large magazine
capacity, so larger cuts can be made without cutting the
wire.

For more information,
visit www.husqvarnacp.com
or scan the QR code with
your smartphone!

MODULAR CS 2512 is modular,
so it is easy to install and handle. It can be
positioned both vertically and horizontally.
The motor can be detached for easier
transport.

ADJUSTABLE CS 2512 is equipped with swivel pulleys. This, in combination with the
capacity to make both vertical and horizontal cuts, ensures superb flexibility.
112

WALL & WIRE

WALL & WIRE

TWO IN ONE Add a CS 10 to your Husqvarna WS 482, WS 440 or WS 463 system and you will have two
machines in one. An efficient investment that is flexible and easy to use.

FLEXIBLE CS 10 can be combined with
the WS 482 HF, WS 440 HF and WS 463

wall saws, forming a complete and
flexible wire and wall cutting system.
Suitable power packs are PP 490 and

PP 440 HF.

IMPROVED All Husqvarna diamond wires now feature a new yellow
rubber bond. This provides increased lifetime through better
adhesion to the core and beads, and also higher resistance to UV
radiation. The visibility during under­water cutting operations is
also improved.

LEARN ABOUT
OUR SLURRY
MANAGEMENT SOLUTIONS
SEE THE SYSTEMS PG 198

113

Wire Saws

Husqvarna CS 10

Applications

• Easily mounts to surfaces and cuts all kinds of openings with
exact corners.

• Used for small to large jobs cutting steel, concrete and other
building materials. It can be used where dry cuts are needed.

WALL & WIRE Benefits

• The saw is coupled to and operated with Husqvarna electric WS
482 HF, WS 440 HF or WS 463 wall saws giving the user a
flexible wall saw and wire saw in one single system.

• It can be mounted on both sides of the wall saw track and can
reverse the direction of the wire.

• Can make dry cuts, making it the perfect tool when slurry is a
concern.

• The wire magazine is easy to operate and time-saving, which
provides faster cuts.

• Wire magazine uses wire lengths from 5.6 ft. to 38 ft.

Item No. CS 10
List price
966565701
$17,732.00

Technical specifications 65 or 82 (20 or 25)
33 (10)
Max wire speed on gear 1 and 2, f/s (m/s) 38 (11.7) or 5.6 (1.7)
Magazine take-up capacity, ft (m) 25 (19)
Wire storage, ft (m) 0 - 1,200 rpm
Output power with WS 482 HF and PP 480 HF, hp (kW) 48 (1,200)
Speed 304 (138)/298 (135)
Column height, in (mm)
Weight, WS 482 HF/WS 440 HF, lbs (kg)

CS 10 is completely symmetrical which allows The CS 10 can be combined with the WS
it to be used in all positions and can reach 482 HF wall saw forming a complete wire
even the tightest spots. and wall cutting system.
114
DIAMOND BLADES - PAGE 119

WALL & WIRE

Husqvarna CS 2512 WALL & WIRE

Applications

• Suitable for deep sawing in materials such as steel,
concrete and other building materials.

• Perfect choice for large dimension sawing of pipes and
tubes.

Benefits

• A large magazine capacity, stores up to 49 ft of wire,
enables larger cuts without cutting the wire.

• Easy to set up - can be placed both vertically and
horizontally.

• The wire magazine is easy to operate and time-saving,
which provides faster cuts.

• The motor can be detached for easier transport.
• Its compact size allows it to fit through a 32" door opening.

Item No. CS 2512
List price
965156201
Technical specifications $32,010.00

Max wire speed at gear 1 and 2, f/s (m/s) 65 or 82 (20 or 25)
Maximum spindle output, hp (kW) 20 (26.5)
Magazine take-up capacity, ft (m) 39 (12)
Wire storage, ft (m) 49 (15)
Weight, lbs (kg) 330 (150)
Speed 0 - 1,200 rpm

WEAR RUBBER DRIVE PRESSURE CONTROL WEAR RUBBER WHEEL
WHEEL BLOCK

Spare parts 531114426 $1,088.00 CS 2512 CS 10
587701501 191.00
Pressure control block, CS 2512 579402401 243.00 X X
Wear rubber ring drive wheel, 16" (400mm) X X
Wear rubber wheel, 8" (200mm) X

Practical, collapsible handles and
foldable guard allow easy ­transportation
of the unit. The saw can be dismantled
into ­sections, further increasing mobility.

DIAMOND BLADES - PAGE 119 115

Accessories for wire sawing

This is a flexible modular pulley system that can easily be adapted to a wide range of applications. The square tube system facilitates perfect alignment of the
pulleys. These wire sawing accessories could be used together with any wire sawing system. They are a perfect match to Husqvarna CS 2512 and CS 10.

Complete units

1 23

PUSH CUTTING KIT OFFSET PULLEY DOUBLE, OFFSET PULLEY DOUBLE, OFFSET PULLEY KIT, SUPPORT KIT
Item No. 587468501 SLOT SLOT/BEARING ROUND TUBE Item No. 587468301
List Price: $4,216.00 Item No. 588730401 Item No. 588730501 Item No. 588539901 List Price: $560.00
Incl: F, G, C, U, L, R, S, Tx2 List Price: $2,029.00 List Price: $2,220.00 List Price: $1,313.00 Incl: P, Q, K, Wx2
Incl: A, Fx2, V Incl: A, F, G, V Incl: C, H, I, J
WALL & WIRE 4

OFFSET PULLEY SINGLE
Item No. 587443001
List Price: $999.00
Incl: A, B

Potential setups based off of individual accessories

A, Fx2 A, F, G A, Bx2, Dx2, F A, B, D A, Bx2 A, Bx2 A, B, D, E C, H, I, J

Wire sawing can be confirgured in many different ways. The setups above are some of the most common confirgurations. The letters below correspond to the

different accessories that make up the setup.

A BC DE

BRACKET OFFSET PULLEY BASEPLATE ASSY ANGLE BRACKET PULLEY ASSY
Item No. 586537201 Item No. 586536701 Item No. 586541701 Item No. 586542101 Item No. 581315901
List Price: $427.00 List Price: $837.00 List Price: $519.00 List Price: $312.00 List Price: $622.00

F G H I J

PIVOT WHEEL, SLOT PIVOT WHEEL, B­ EARING OFFSET PULLEY, ROUND COLUMN ROUND TUBE DOUBLE CLAMP
Item No. 586538401 Item No. 586535801 TUBE 48.3 Item No. 531114471 Item No. 531114460
List Price: $745.00 List Price: $951.00 Item No. 586538701 List Price: $101.00 List Price: $92.00
List Price: $686.00
116
DIAMOND BLADES - PAGE 119

WALL & WIRE

K LM

ANCHOR PLATE SWIVEL PULLEY S­ LIDING SWIVEL PULLEY BEARING WHEEL COVER JOINTING SLEEVE
Item No. 586870001 FOR ROUND TUBES FOR ROUND TUBES Item No. 586539901 Item No. 585643001
List Price: $312.00 Item No. 531114469 Item No. 531114467 List Price: $523.00 List Price: $216.00
List Price: $675.00 List Price: $865.00
N P Q
O

JOINTING SLEEVE, CROSS FOOT FOOTPLATE BRACKET BRACKET WALL & WIRE
Item No. 585640501 Item No. 501357601 Item No. 585641901 Item No. 584253801 Item No. 584259301
List Price: $396.00 List Price: $353.00 List Price: $199.00 List Price: $192.00 List Price: $247.00

RS T U V

SUPPORT Ø 300 MM SUPPORT Ø 250 MM HOLDER ASSY BRACKET ANGLE BRACKET
Item No. 586540801 Item No. 586540501 Item No. 586541101 PARALLEL ASSY Item No. 587443301
List Price: $397.00 List Price: $444.00 List Price: $322.00 Item No. 586539201 List Price: $174.00
List Price: $431.00
W X Y
Z

COUPLING, ­SWIVELING COUPLING 90 WATER LANCE SQUARE TUBES ROUND TUBES
Item No. 522809901 Item No. 531119571 Item No. 531121525 Item No. Item No.
List Price: $54.00 List Price: $50.00 List Price: $165.00 1.15 m: 576293501 0.25 m: 531114472
List Price: $80.00 List Price: $75.00
2 m: 587466901 1 m: 531120641
List Price: $17300 List Price: $71.00
2 m: 531120642
List Price: $125.00
3 m: 531119580
List Price: $233.00

WRENCH 18 MM WRENCH 22 – 24 MM
Item No. 531119065 Item No. 531119573
List Price: $40.00 List Price: $40.00

DIAMOND BLADES - PAGE 119 117

Wire saw configurations examples

Below are the most common wire saw set-ups. The letters and numbers within the drawings correspond to the different accessories that are included.
Please see the chart below for accessory information and pages 116-117 for pricing information.

XO A, F
Y A, F

M
E

Z

NY 4 A, Bx2
OE
WALL & WIRE NAME A, Bx2
Footplate
CONFIGURATION EXAMPLE 1 Offset pulley single CONFIGURATION EXAMPLE 2
Water lance
POS. ITEM NUMBER Pulley assy POS. ITEM NUMBER NAME
Jointing sleeve, cross A
0 585641901 Joining sleeve 586537201 Bracket
Square tube F
4 587443001 Coupling 586538401 Pivot wheel, slot
B
Y 531121525 4 586536701 Offset pulley

E 581315901

N 585640501

M 585643001

Z 587466901

X 531119571

4 Z
Z

Z 1
1

B, C

CONFIGURATION EXAMPLE 3 CONFIGURATION EXAMPLE 4

POS. ITEM NUMBER NAME POS. ITEM NUMBER NAME
4 587443001 Offset pulley single Z 587466901 Square tube
Z 587466901 Square tube 1 587468501 Push cutting kit

B 586536701 Offset pulley

C 586541701 Baseplate assy

118

WALL & WIRE

WALL & WIRE

DIAMOND TOOLS FOR WIRE SAWING

Husqvarna offers a complete range of diamond wires, engineered for use with a variety of materials and numerous applications.
Husqvarna diamond wires use injected synthetic rubber and springs for the assembly. A synthetic rubber wire is very flexible, making it
easy to use, as well as minimizing the risk of uneven wear to the wire beads. Husqvarna wires have at least 40 beads per meter. More
beads per meter means increased contact between the cutting diamonds and the wire, resulting in higher speed and increased product
life. The distance between the beads is smaller, resulting in a more even cut.

PROFESSIONAL
For more information, see page 10

MATERIAL 13-27 HP 27-45 HP >45 HP
CONCRETE
REINFORCED CONCRETE (10-20 KW) (20-33 KW) >33 KW
H I GHLY REI NF OR C ED C O N C R E T E
METAL C 7 7 7/ C 74 0/ C 84 0 C 7 7 7/ C 74 0 C 7 7 7/ C 74 0
C 7 7 7/ C 74 0/ C 9 5 0 C 7 7 7/ C 74 0/ C 9 5 0/ C 1 0 0 0 C 7 7 7/ C 74 0/ C 9 5 0/ C 1 0 0 0

C950 C950/C1000 C950/C1000
C950 C950/C1000 C1000

Vacuum-brazed wires are developed specifically for demanding applications
like dry and wet cutting in reinforced concrete, and in solid or hollow steel.
The vacuum technology enhances durability and performance. Vacuum
­technology uses active welding, one of the strongest welding methods, making
for extra hard bonds and excellent diamond retention.

119

Vacuum-Brazed Wire

Vacuum-brazed wires cut faster and last longer than standard
electrop­ lated wires. They are ideal for both dry and wet cutting.

WALL & WIRE Husqvarna C1000

THE UNIVERSAL WIRE

• The C1000 is our heavy-duty diamond wire. It can be used wet or dry in reinforced
concrete and steel sawing

• Its unique vacuum brazed technology and coarse diamonds give this wire a long
life and high-cutting speed in very demanding applications

• 44 beads/meter, 10.3mm wide

Husqvarna C950

HIGH SPEED WIRE

• C950 is a high-cutting speed wire that can cut through concrete with medium to
high reinforcement and steel

• 40 beads/meter, 10.3mm wide

Husqvarna C900 Rescue

THE RESCUE WIRE

• C900 Rescue is a high-cutting speed wire that can cut through concrete with
medium to high reinforcement and steel

• 40 beads/meter, 9.5 mm wide

PRODUCT NUMBER OF DIAMETER BEADS, ASSEMBLY CUTTING LIST PRICE
NUMBER BEADS / M SYSTEM
MM $/FT.
C 1000 44 Dry / wet $110.00/ft
542863241 40 10.3 Springs + rubber, vacuum-brazed Dry / wet
40 beads Dry / wet $100.00/ft
C 950
542863021 10.3 Springs + rubber, vacuum-brazed $100.00/ft
beads
C 900 RESCUE
542863245 9.5 Springs + rubber, vacuum-brazed
beads

Closed loop wires

WIRE WITHOUT CONNECTION THAT NEVER FAILS
• Ideally suited for cutting in steel, sandwich and hollow structures. This wire is used mainly in offshore and

nuclear applications. Wires can be used on push cutting machines and conventional pulling machines (open
pulleys are necessary).
• Available on demand in different specifications (C950, C1000).

Contact your Husqvarna representative for more information.

120

WALL & WIRE WALL & WIRE

Sintered Wire

The active part of the beads is a ring of sintered diamonds whose
composition is like the segments used in blades. It is a long-life wire.

Husqvarna C777

THE PREMIUM WIRE
C777 wire is designed to provide great performance in hard concrete or flint reinforced concrete.
Providing long life in light and medium reinforced concrete.
40 beads/meter, 11mm wide.

Husqvarna C740

THE GENERAL PURPOSE WIRE
C740 wire is designed as a general purpose wire for concrete and reinfoced concrete sawing.
• 40 beads/meter, 11mm wide.

PRODUCT NUMBER OF DIAMETER BEADS, ASSEMBLY CUTTING LIST PRICE
NUMBER BEADS / M SYSTEM $/FT.
MM
C 777 40 Wet $84.00/ft
586606901 40 11 Springs + rubber, sintered beads Wet $72.00/ft
C 740
592755501 11 Springs + rubber, sintered beads

Diamond Wire Accessories.

Quantity Description Item No. List Price
542766277
A1 Connector crimps, 8.0/5.0 x 24mm 543021515 $1.70
542766272 4.40
B1 Connector crimps - threaded 9.5/5.0 x 24mm 542766271 155.00
542766270 63.00
C1 Cutting die MB7 542766282 63.00
542766273 1,065.00
D1 Hex crimp die MK7 for 8.0mm wire** 945.00
DE
D1 Hex crimp die MK8 for 9.5mm wire**

E1 Hydraulic crimping tool kit*

1 Hydraulic crimping tool with case

*Includes MK8 crimping dies, MB7 cutting dies and hydraulic crimping tool with case.

**Use MK7 with 8.0 mm Connector crimps.

**Use MK8 with 9.0/9.5 mm Connector crimps.

A BC

Connector crimps Threaded connector crimps Hydraulic cutting dies Hydraulic crimping dies Hydraulic crimping tool

121

CORE DRILLS WHAT MAKES DRILLING
SPECIALISTS MORE
PRODUCTIVE?

Drilling systems that enable you to drill quickly, more ergonomically and adapt to different applications can make you more productive.
When developing and improving our drill motors, drill stands and diamond bits we look at the whole system. We analyze every
component and process to find out how we can make skilled drilling operators work even more efficiently and effortlessly. More holes
drilled per working hour. More production per operator. That’s what a Husqvarna core drilling system is designed to do.

Range overview

Husqvarna drill systems consist of powerful drill motors and sturdy stands. Power options are available from the electric handheld
2.5 hp DM 220 to the hydraulic 12.5 hp DM 406 H. Recommended maximum drilling diameters range from 4 in to 24 in. For the
highest production rate, choose the system/systems optimal for your kind of operation.

DM 406 H DM 650 DM 340 DM 280 DMS 240 DMS 180 DM 230 DM 220
+ stand DS 900 + stand DS 900 + stand DS 450 + stand DS 450

4 in 4 in
100 mm 100 mm

REC. MAX HANDHELD
DRILLING
DIAMETER 24 in 24 in 16 in 14 in 10 in 6 in
600 mm 600 mm 400 mm 350 mm 250 mm 150 mm
in (mm)
WITH SPACERS WITH STAND

6 in 6 in
150 mm 150 mm

13 12.5 hp
(10) 9.3 kW
POWER 7
hp (kW) (5) 8 hp
6 kW
0
4.4 hp 3.1 hp 2.9 hp 2.3 hp 2.5 hp 2.5 hp
3.3 kW 2.3 kW 2.2 kW 1.8 kW 1.9 kW 1.9 kW

Hydraulic
Electric
Electric
Electric
Electric
Electric
Electric
Electric

122

CORE DRILLS

HUSQVARNA PRIME PRODUCT RANGE
– LIGHT EQUIPMENT FOR HEAVY JOBS

Our new range of high frequency PRIME equipment offers outstanding power-to-
weight ratio and exceptional performance. You can perform wall sawing, drilling
and handheld cutting using the same power source. In short, do more jobs with
smaller, lighter equipment with increased productivity.

FLEXIBLE POWER, you can use Husqvarna CORE DRILLS
DM 650 / PP 65 with both 3-phase and 1-phase
power. With 1-phase power the system delivers HUSQVARNA DM 650 is a very powerful and
4 hp on the spindle, making the DM 650 the versatile electric drill motor equipped with high
most powerful 1-phase drill motor on the market. frequency PRIME technology. The high power
3-phase power delivers 8 hp at the spindle. output, low weight, user-friendly setup and
intelligent design make the Husqvarna DM 650
UPDATED suitable for most drilling applications. The
spindle speed can be optimized while running.
Updated DM 340 and DM 280 Drill Motors

POP-UP CARBON BRUSHES and aluminum brush holders increase For more information,
motor life by shutting off the motor to prevent running the brushes visit www.husqvarnacp.com
too long resulting in subsequent damage to rotor.
or scan the QR code with
UPGRADED O-RINGS and radial seal on gearbox create a tight your smartphone!
closure of the gearbox.
TAKE NOTE!
HIGHER HEAT TOLERANT the motor can tolerate and perform FIND THIS ICON AND LEARN
effectively in higher ambiant temperatures. ABOUT OUR DUST AND SLURRY
MANAGEMENT SOLUTIONS
WATER KITS help maintain efficient water flow to the machine. WWW.HUSQVARNACP.COM/US/SILICA

123

Large Motor Core Drill Kits

Applications

• Developed for construction professionals who need
to drill holes up to 14" in concrete, brick or masonry.

Benefits

• Plug-n-play drill rigs are designed to be
uncomplicated, reliable and user friendly.

• More information on the motors and stands can be
found in the pages following.

CORE DRILLS *Price includes drill motor and stand. DMS 340 LS DMS 280 LS

Item No. (DS 450 Anchor base) 967208601 966720104
List price $4,408.00 $3,984.00
Item No. (DS 450 Anchor Base, vacuum plate) 967208602 966720105
List price $4,641.00 $4,216.00
Item No. (DS 450 Anchor Base, vacuum plate, pump) 967208603 966720106
List price $5,627.00 $5,182.00

Technical specifications 16 (400) 14 (355)
14 (355) 14 (355)
Maximum bit diameter with spacers, in (mm) 4.4 (3.3) 3 (2.4)
Maximum bit diameter without spacer, in (mm) 115/27 115/20
Power, hp (kW)
Voltage/amperage, V/amps 3 3
Speeds 25-1/2 (648) 25-1/2 (648)
Travel length, in (mm) 240/530/900 310/690/1,190
Spindle speed no load, rpms 170/380/650 250/550/950
Spindle speed full load, rpms
Rated output, watts 3,300 2,400
Sound pressure level, dB(A) 98 90
Sound power level, dB(A) 105 94
Spindle thread, outer
Weight, lbs (kg) 1-1/4-7 1-1/4-7
Recommended generator size, watts 88 (40) 86 (39)
6,500 5,000

124 DIAMOND BITS - PAGE 136

CORE DRILLS

*Priceincludesdrillmotorandstand. DS 800 / DM 280 LS DMS 240 DMS 180 CORE DRILLS

Item No. (DS 800 Combo base, vacuum assembly) 965177232 - -
List price $5,096.00 - -
Item No. 965173601 966916101
List price - $2,196.00 $1,379.00
Item No. ( Vacuum pump assembly) - 965173606 966916102
List price - $2,924.00 $2,047.00
-
Technical specifications 10 (250) 6 (150)
14 (355) - -
Maximum bit diameter with spacers, in (mm) 14 (355)
Maximum bit diameter without spacer, in (mm) 3 (2.4) 2.9 (2.2) 2.3 (1.8)
Power, hp (kW) 115/20 115/20 115/20
Voltage/amperage, V/amps
Speeds 3 2 1
Travel length, in (mm) 25-1/2 (648) 24 (610) 19 (480)
Spindle speed no load, rpms 310/690/1,190 390/890
Spindle speed full load, rpms 250/550/950 -
Rated output, watts - 800
Sound pressure level, dB(A) 2,400 2,200 1,750
Sound power level, dB(A) 90 89
Spindle thread, outer 94 89 102
Weight, lbs (kg) 102 1-1/4-7
Recommended generator size, watts 1-1/4-7 1-1/4-7 51 (23)
122 (55) 51 (23) 3,500
5,000 5,000

DIAMOND BITS - PAGE 136 125

DM 406 H

CORE DRILLS Item No. DM 406 H Applications
List price
965158207 • Hydraulic drill motor used to drill reinforced concrete,
Technical specifications $6,433.00 bricks and other building materials.

Flow requirements 10 GPM @2,000 PSI • Able to drill holes for waste evacuation pipes, stitch drill
High range motor speed 1,400/980/120 as well as drill large openings and deep holes for other
Recommended bit diameter, high range, in (mm) 1 - 6 (25 - 152) channels and pipes.
Low range motor speed 340/230/120
Recommended bit diameter, low range, in (mm) 6 - 24 (152 - 610) • Ideal for use with Husqvarna’s PP 518 gas or PP 325 E
Weight, lbs (kg) 35 (15.9) electric power packs.
Spindle thread 1-1/4-7
• Ideal for large diameter holes.

Benefits

• Six speeds accommodate 2" to 24" diameter bits.
• Two mechanical and three hydraulic gears provide a

wide range of RPMs with maximum power and
production.

• The hydraulic speed control enables the operator to
change spindle speeds while drilling.

Husqvarna PP 325 E power Husqvarna PP 518 power
pack, pg 102. pack, pg 103.

Show here with DS 900 drill stand. DS 900 | DS 800
Drill bit not included.
DIAMOND BITS - PAGE 136
Recommended Drill Stands

126

CORE DRILLS

PRIME DM 650

Item No. DM 650 Applications CORE DRILLS
List price • Ideal for all core drilling 4" (100 mm) to 24" (600 mm) in
966563601
Technical specifications $5,913.00 reinforced concrete, brick and other building materials.
• Perfect for heavy-duty applications like water drains,
Power 3-phase/1-phase, hp (kW) 8 (5.9) (3-phase)
4 (2.9) (1-phase) ventilation (HVAC), plumbing channels, waste drain pipes,
Voltage 3-phase/1-phase, V 480 (3-phase) gas supply pipes, manholes and barriers.
230 (1 phase) • Powered by PP 65 or PP 220.
Speeds 18 (2 mechanical, 9 electric) Benefits
Spindle speed no load, rpm 126-502 • Very powerful drill motor delivering 6,000 W on the spindle
Drill bit diameter with stand, max in (mm) 24 (600) (3,000 W on 1-phase).
UNC water coupling G-1/4" • 18-step adjustable rpm range ensures optimal speed for all
Spindle thread, outer 1-1/4 - 7" drill bit dimensions.
Sound pressure level, dB(A) 98 • It is easy to adjust the speed while drilling.
Sound power level, dB(A) 113 • The low weight and ergonomic design make it easy to carry
Weight, lbs (kg) 31 (14) and mount.
• Dust-proof, water-cooled motor with minimal service
PRIME PP 65 requirements.
• When drilling in steel or difficult materials, the torque boost
Item No. PP 65 reduces speed to increase drilling torque.
List price • Durable, shock-proof design protects the electronics.
966563703 • Elgard™ enables drilling at maximum pressure without risk
$5,820.00 of overload.

Technical specifications Applications
• Electric power pack for Husqvarna’s K 6500, K 6500 Ring,
Power 3-phase/1-phase, hp (kW) 8.7/4.7 (6.5/3.5)
K 6500 Chain and DM 650 high frequency products.
Rated current, amp 10/16 • Suitable for applications where easy transportation to and

Voltage 3-phase/1-phase, V 200-480 / 220-240 around the job site is required.

Cooling Air Benefits
• Easy to carry and use due to low weight and ergonomic
Weight, lbs (kg) 21 (9.5)
design.
Recommended minimum size generator, kW 10 • Digital menu/display for efficient control and service.
• The PP 65 is separated from the cutting equipment, which
Recommended Drill Stands
means less exposure to dirt and vibrations.
DIAMOND BITS - PAGE 136 • It can connect to both 3- and 1-phase power.

DS 900 | DS 800

127

DM 340 | DM 280

UPDATED UPDATED

DM 340 DM 280 Applications

Item No. 965987204 (115V) • Drills reinforced concrete, bricks and other building
materials.
List price $2,730.00
• Perfect for a variety of applications including water/
CORE DRILLS Item No. 965987210 (230V) 966554104 (Low speed) 110V waste evacuation pipes, openings for ventilation and
plumbing, gas supply pipes, barriers, road signs and
List price $2,730.00 $2,363.00 holes in corners for wall saw openings.

Technical specifications • Angle drilling and positioning in all directions.

Maximum bit diameter with stand, in (mm) 16 (400) Benefits

Power, hp (kW) 4.4 (3.3) • Updated pop-up carbon brushes for longer life and
service intervals.
Motor 1-Phase, Electric
• Water-cooled, three-speed gearbox facilitates
Voltage, V 230/115 optimal drilling performance and increases life.

Rated output, watts 2,850/3,400 • Equipped with Elgard™, which indicates, via an LED,
when the motor is being overloaded. This prevents
Rated current, amps 16/27 motor damage and increases product life.

Speeds 3 • Smartstart® reduces drill motor RPMs to decrease
240/530/900 vibration when starting a hole.
Spindle speed no load 170/380/650
low speed, rpm 1-1/4-7 • Softstart™ slowly increases motor RPMs when
Spindle speed full load starting, which reduces wear on the motor and
low speed, rpm brushes.

Spindle thread, outer • Water hose can be turned 180 degrees to improve
hose management when drilling in tight spaces.
UNC water coupling G 1/4"

Sound pressure level, dB(A) 98

Sound power level, dB(A) 105

Weight, lbs (kg) 31

Recommended generator size, watts 6,500

Recommended Drill Stands DS 900 | DS 800 | DS 450

128 DIAMOND BITS - PAGE 136

DM 220 CORE DRILLS

UPDATED

DM 220 Applications

Item No. 966563503 (110V) • Used for handheld drilling up to 4".

List price 2,159.00 • Mount on DS 250 drills tand to drill holes up to 6" or angle
drill. Can be used with a vaccuum for dust free project.
Technical specifications CORE DRILLS
• Vac port comes standard for dry applications such as
Maximum bit diameter with stand, in (mm) 6 (150) drilling bricks, blocks or other building materials.

Maximum bit diameter handheld, in (mm) 4 (100) • Used for wet applications when drilling reinforced
concrete.
Power, hp (kW) 2.3 (1.7)
• Perfect tool for drilling smaller holes for ventilation,
Motor 1-Phase, Electric plumbing pipes, joints, electrical sockets and telecom
cable openings.
Voltage, V 230/115
Benefits
Rated output, watts 1,850
• Motor can tolerate and perform effectively in higher
Rated current, amps 8/15 ambient temperatures.

Speeds 3 • Gearbox and motor alignment have been updated to
reduce friction and improve sturdiness.
Spindle Speed no load, rpm 900/2,150/4,500
• Equipped with a LED indicator that shows when the
Spindle Speed full load , rpm 500/1,400/2,900 machine is in a vertical or horizontal position and can
also be calibrated to help guide the operator while angle
Spindle thread, inner 5/8-11 drilling.

Spindle thread, outer 1-1/4-7 • The positioning system makes it possible for the operator
to focus on drilling while controlling the position of the
UNC water coupling G 1/4" machine via the LED indicators.

Sound pressure level, dB(A) 90 • Softstart™ slowly increases motor RPMs when starting,
which reduces wear on the motor and brushes.
Sound power level, dB(A) 94
• Objective data testing available on:
Weight, lbs (kg) 15.4 (7) www.husqvarnacp.com/us/silica

Recommended generator size, watts 5,000

Recommended Drill Stands DS 250 1 Speed / 2 Speed

DIAMOND BITS - PAGE 136 129

DM 230

UPDATED

CORE DRILLS DM 230 Applications

Item No. 968411301 (110V) • The DM 230 can be used for handheld drilling applications
List price $2,040.00 up to 4" in diameter. It can be mounted on the DS 150 drill
stand for angle drilling applications and drilling holes up to
Technical specifications 6" in diameter.

Power, hp (kW) 2.3 (1.7) • Used to drill holes for ventilation, plumbing pipes, joints,
electrical sockets and telecom cables in reinforced
Motor 1-Phase, Electric concrete, bricks and other building materials.

Voltage, V 230/115 Benefits

Rated output, watts 1,850 • Motor can tolerate and perform effectively in higher
ambient temperatures.
Rated current, amps 8/15
• Gearbox and motor alignment have been updated to
Speeds 3 reduce friction and improve sturdiness.

Spindle Speed no load, rpm 730/1,700/3,600 • Equipped with Elgard™, an indicator that pulses when the
machine is overloaded, which provides longer product life.
Spindle Speed full load , rpm 580/1,400/2,900
• Smartstart® reduces drill motor RPMs to decrease
Maximum bit diameter with stand, in (mm) 6 (150) vibration when starting a hole.

Maximum bit diameter handheld, in (mm) 4 (100) • Softstart™ slowly increases motor RPMs when starting,
which reduces wear on the motor and brushes.
Spindle thread, inner 5/8-11
• The 3-speed, water-cooled gearbox provides optimal
Spindle thread, outer 1-1/4-7 drilling performance and longer service intervals.

UNC water coupling G 1/4" • Designed with a plastic housing, which makes it more
durable against drops and daily wear.
Sound pressure level, dB(A) 90
• The handle and controls are designed and positioned to
Sound power level, dB(A) 94 further enhance drilling performance and ergonomics.

Weight, lbs (kg) 15.4 (7)

Recommended generator size, watts 5,000

Recommended Drill Stands DS 250 1 Speed / 2 Speed

130 DIAMOND BITS - PAGE 136

Universal Core Drilling Accessories (Motors) CORE DRILLS

Adapter cord, 20A twist to 15A straight 542173120 $28.00 DUST & SLURRY MGMT
Copper washer for 1-1/4" - 7 spindles 541400568 9.90
Dust Bug 90 590652001 x
Dust Bug 180 590652002 101.00 x
Quick disconnect ring for core bits 543052878 170.00
Quick anchor, 1/2" UNC 590685701 143.00 x
Quick disconnect washer 1-1/4" 542162849 132.00 x
Quick disconnect washer 5/8" 542162848 x
Slurry vacuum ring - 5" bit capacity 541402591 1.55 x
Slurry vacuum ring - 10" bit capacity 541402590 1.55 x
Spindle wrench, 1-5/8" thin style 531119032 223.00 x
Water feed assembly 582017501 264.00
Water tank (metal - 4 gallon) 582017401 76.00 CORE DRILLS
Water tank, PWT 15 506326302 76.00
Water tank, WT 15 966708302 278.00
1-1/4"-7, 6" (150mm) extension / Shaft extension T-410006, 6" 541400035 98.00
1-1/4"-7, 12" (300mm) extension / Shaft extension T-420012, 12" 541201737 439.00
1-1/4"-7, 24" (610mm) extension / Shaft extension T-420024, 24" 541404607 68.00
5/8"-11, 6" (150mm) extension / Shaft extension T-415007, 6" 541400066 94.00
5/8"-11, 12" (300mm) extension / Shaft extension T-415012, 12" 541400070 129.00
1-1/4"-7, 5/8"-11 shaft adapter / Threaded shaft adapter T-420415 541201736 50.00
1-1/4"-7, 1/2"-20 shaft adapter / Threaded shaft adapter T-420410 541404608 70.00
5/8"-11, 1/2"-20 shaft adapter / Threaded shaft adapter T-415410 541404609 55.00
5/8"-11, 1-1/4"-7 shaft adapter / Threaded shaft adapter T-415420 541404610 76.00
1/2"-20, 5/8"-11 shaft adapter / Threaded shaft adapter T-410415 541404611 84.00
M-18, 5/8"-11 shaft adapter / Threaded shaft adapter DM100-1 541404612 84.00
M-18, 1-1/4"-7 shaft adapter / Threaded shaft adapter DM100-2 541404613 174.00
*Standard with DS 250 1-speed. 50.00
79.00

Water feed assembly Slurry vacuum ring, 5" and Core bit quick disconnect Water tanks Shaft adapters
10" bit capacity ring

Extensions Quick anchor WT 15 pressurized water Dust Bug
tank

ACCESSORIES TO ASSIST
DUST AND SLURRY MANAGEMENT
ADDITIONAL DETAILS PG 135

DIAMOND BITS - PAGE 136 131

LARGE DRILL STANDS

DS 900 Applications

Item No. (drill stand) DS 900 • Drill stand made to support large diameter,
List price heavy-duty drilling applications.
Recommended equipment 967301602
$4,503.00 Benefits
DM 650, DM 406
• Incorporates the 48" column of our wall saws
CORE DRILLS DS 800 DS 800 DS 800 for increased strength and stability.
Anchor Base Combo Base
Item No. • Equipped with a carry handle on back support
List price 965176902 965176901 and ergonomic 3-spoke handle.
Item No. $1,755.00 $1,886.00
(with roller carriage) • Wheel kit can be attached for easy
List price 965176906 965176905 transportation.
Recommended equipment
$2,505.00 $2,731.00 Applications

DM 650, DM 406, DM 340, DM 280 • 42" long, precision ground and plated 2-7/8"
square column reduces flex for more accurate
drilling.

Benefits

• Reinforced base for added rigidity.
• Jack screw is standard and provides stability

when ceiling bracing.
• Precision rack and pinion gear system

enables smooth operation.

DS 450 DS 450 Applications
Anchor Base
Item No. • Used to drill openings for ventilation,
List price 966829808 plumbing and stitch drilling with larger holes
Recommended equipment $1,540.00 as well as angle drilling in reinforced
DM 340, DM 280 concrete, bricks and other building materials.

Benefits

• The two-speed carriage gearbox features two
feed speeds for optimal drilling performance.

• Quick disconnect enables operator to easily
remove or mount drill motor.

Technical Specifications

Max drill bit diameter, in (mm) DS 900 DS 800 DS 450
Max travel, in (mm)
Tilt angle range 35 (900) 24 (600) with spacer 16 (400) with spacer
Carriage gearbox 37 (944) 25-1/2 (650) 25-1/2 (650)
Weight, lbs (kg) 0-60° 0-60° w / angle bracket assembly 0-75°
1 Speed 1 Speed 2 Speed
70.5 (32) 108 (49) without carriage 53 (24)

132 DIAMOND BITS - PAGE 136

SMALL DRILL STANDS CORE DRILLS

DS 250 Applications
• Perfect stand for drilling in walls
Item No. DS 250 2-sp DS 250 1-sp
List price and floors up to 10" in diameter
966827302 966827304 when drilling ventilation channels,
$1,105.00 $879.00 plumbing and joints.
• Drills in reinforced concrete, bricks
Technical specifications and other building materials.
• Used to angle drill and stitch drill.
Max drill diameter, in (mm) 10 (254) 10 (254)
Max travel, in (mm) 27 (685) 27 (685) Benefits
Maximum tilt angle 60° 60° • Two versions, 1-speed and
Carriage gearbox 2 Speed 1 Speed
Weight, lbs (kg) 17 (7.7) 16 (5.9) 2-speed, are available. Both can
Recommended equipment DM 220 be used with most drill motors on
the market.
DS 150 DS 150 CORE DRILLS
Applications
Item No. 966827202 • This drill stand can be used with
List price $877.00
the DM 230 hand drill.
Technical specifications • Drills reinforced concrete, bricks

Max drill diameter, in (mm) 6 (150) and other building materials up to
Max travel, in (mm) 19.5 (495) 6" in diameter.
Maximum tilt angle 60° • Used to angle drill.
Carriage gearbox 1 Speed
Weight, lbs (kg) 14 (6.4) Benefits
Recommended equipment DM 230 • Light and compact, it is easy to

transport and mount the stand.
• Equipped with stabilizing guide

rollers for accurate drilling.

DIAMOND BITS - PAGE 136 133

ACCESSORIES TO FIT YOUR STAND

DS 900 Accessories

Column, 48"/400 track, 48" (1.2m) 531113045 $2,196.00
3,060.00
Column, extended 79"/400 track, 79" (2.0m) 531113046
428.00
Motor plate spacer, 8" 586879901 429.00

Motor plate spacer, 2" quick disconnect 579501001 1.55
800.00
Quick disconnect washer 1-1/4" 542162849

Wheel kit, DS 900 587088101 Column 2-Meter Column Wheel Kit

DS 800 Accessories

Anchor Base

Anchor base, DS 800 541403895 $338.00
Anchor base, vacuum assembly with pad for DS 800* 541400057 1,564.00
Vacuum pump with fittings, anchor base for DS 800 541401607
951.00
Combo Base

CORE DRILLS Combo base for DS 800 504539502 $630.00 DS 800 anchor base DS 800 combo base
Combo base, gasket, DS 800 541201985 19.00
Combo base, slot gasket, DS 800 541201981 17.00
Vacuum assembly, combo base, DS 800 505190201
1,096.00
All DS 800 Models

Adapter, pyramid style, DS 800 541401283 137.00 DS 800 vacuum pump DS 800 vacuum assembly
Ammeter (0-30), replacement for DS 800 506608801 31.00 with fittings and pad for for combo base
Carriage with handle, roller 541401507 1,814.00 anchor base DS 800 motor mount
Carriage with handle, slide 541400562 911.00 DS 800 spacer blocks adapter
Control panel, ammeter, switch/cord assembly, DS 800 541404016 404.00
Drill column, 42" DS 800 541402574 489.00
Drill column, 60" DS 800 541401109 1,004.00
Drill column, 72" DS 800 541401107 1,204.00
Drill column, 80" DS 800 541401105 1,245.00
Drill column, 120" DS 800 541404256 3,354.00
Motor mount adapter, DS 800 541400325 160.00
Spacer block, 2" for DS 800 502624801 162.00
Spacer block, 2" with key and bolts for DS 800 504544201 179.00
Vacuum pad with gasket, DS 800* 541401932 224.00
Vacuum pump, without fittings for DS 800 505549502 395.00
3/4" base leveling screw, DS 800 541403519
*Complete with vacuum pump and pad. 5.10

DS 450 Accessories DS 250 & DS 150 Accessories

Column, extended 6-1/2' (2m) 525857602 $602.00 Ring adapter, DS 250 2-speed* 581257101 $120.00 DS 250 DS 150
Motor plate spacer, 2" quick disconnect 579501001 429.00 578932101 20.00
Vacuum plate, assembly complete 541405093 230.00 Vacuum plate, gasket 541400078 726.00 X X
Vacuum plate, base gasket 541405132 22.00 541405089 67.00 X X
Vacuum pump, with fittings 522966001 714.00 Vacuum pump, with fittings X
Wheel kit, DS 450 541405083 221.00 X
Wheel kit
*Standard with DS 250 1-speed.

DS 450 vacuum plate DS 450 vacuum pump with 2" quick disconnect motor Ring adapter
assembly fittings spacer
134
DIAMOND BITS - PAGE 136

CORE DRILLS

HOW TO CONTROL DUST AND
SLURRY WHILE DRILLING

S LINE A LINE W LINE WATER SUPPLY
S 36 S 26 S 13 A 1200 A 600 W 70 P/W 70/W 250 P
WT 15 / PWT 15
DRY CORE DRILLING WET CORE DRILLING WT 15 / PWT 15 CORE DRILLS
WT 15 / PWT 15
DM 340 DB a ++ DM 650 Slurry Collectora / Slurry Collector+ WT 15 / PWT 15
DM 280 DB a ++ DM 340 Slurry Collectora / Slurry Collector+ WT 15 / PWT 15
DM 280 Slurry Collectora / Slurry Collector+
DM 230 DEA/DBa ++ DM 230 Slurry Collectora / Slurry Collector+
DM 220 Slurry Collectora / Slurry Collector+
DM 220 DB a ++

aAttached to machine + Part of solution

DB-Dust Bug DEA - Dust Extraction Attachment aAttached to machine + Part of solution

Dust Bugs

Dust bugs help facilitate dust collection when dry drilling. The dust
bugs help capture dust at the source to keep the surrounding area
cleaner.

Name Application Recommended Vacuum Item No. List Price
Dust Bug 90 Drilling up to 3 1/4" S 13 or larger 590652001 $101.00
Dust Bug 180 Drilling up to 6 3/4" W 70 P - Wet 590652002 170.00

DIAMOND BITS - PAGE 136 DUST AND SLURRY
MANAGEMENT SOLUTIONS
DUST EXTRACTORS PG 186

135

Core Bit Segment Shapes

Z-EDGE ROOF TOP STRAIGHT TURBO

B1410 & B10 B1420 B1425, B1430, B20, B30, B80 TACTI-DRILL B10

General core bit application chart.

SEGMENT TYPE Z-EDGE ROOF TOP STRAIGHT TURBO

MATERIAL B 1410 B1420 B1425 B1430 VARI-DRILL TACTI-DRILL
VARI-DRILL B 10 BANNER LINE® VARI-DRILL B80 B10
ll VARI-DRILL B 20
HI G HLY R EI N F O RC ED C ON CR E TE lll ll B 30 – ll
lll ll – ll
REINFORCED CONCRETE lll ll l –
l lll l l
CORE DRILLS HARD AGGREGATE CONCRETE lll ll lll lll l
ll
A S P H A LT l BRONZE

l l l = Optimal  l l = Good  l = Acceptable  – = Not recommended

GOLD SILVER

For more information, see page 10

136

CORE DRILLS

Husqvarna Elite-Drill B1400 Series

ULTIMATE PERFORMANCE CORE DRILL BITS

• B1410: faster drilling in flint, chert and hard aggregate with high steel reinforcement
• B1420: fast drilling with a longer life in flint and hard aggregate with high steel reinforcement
• B1425: fast drilling in flint concrete with or without steel reinforcement
• B1430: long life in medium to hard concrete with medium to high reinforcement
• 3/8" to 1-1/2" bits have a 5/8"-11 adapter. Bits 1-5/8" and above have a 1-1/4" - 7 thread adapter

Z-EDGE ROOFTOP STRAIGHT STRAIGHT

Diameter Item no. WET CUTTING CORE DRILLS

Inches mm B1410 B1420 B1425 B1430 List Price
593948401 $127.00
1 25 593948402 592880701 140.00
593948403 592880702 144.00
1-1/8 29 593948404 592880703 162.00
593948405 592880704 173.00
1-1/4 32 593948406 592880705 179.00
592880601 592880706 176.00
1-1/2 38 592880602 592880707 220.00
592880603 592880708 253.00
1-3/4 44 592880604 592880709 304.00
592880605 592880710 330.00
1-7/8 48 592880606 592880711 389.00
592880607 592880712
2 51 593069801 586669202 592880608 592880713 417.00
592880609 592880714 436.00
2-1/2 73 593069802 586669404 592880610 593070101 529.00
592880611 686.00
3 76 593069803 586328505 592880612 711.00
592880613 847.00
3-1/2 89 593069804 587635304 592880614 908.00
593070001 1,138.00
4 100 593069805 586328602 1,419.00

4-1/4 108 593069806 587635401

4-1/2 114 593069807 587635501

5 127 593069808 586328701

6 152 593069809 586328801

7 178 593069810 587494201

8 203 593069811 587494401

9 228 593069812 587495301

10 254 593069813 587513701

12 305 593069814 587513801

14 356 593069815 587514001

Total segment height for this series is .400" (.300" diamond depth; .100" segment base).

137

Husqvarna Elite-Drill B1400 Crown Bit Series

PROFESSIONAL BITS

• B1410: flint, chert and hard aggregate with high steel reinforcement
• B1420: flint, chert and other hard aggregates with steel reinforcement

WET CUTTING | LASER WELD

Diameter

Inches (mm) B 1410 5/8" Threads B 1410 1-1/4" 7 Threads B 1420 5/8" Threads B 1420 1-1/4" 7 Threads List Price
N/A $123.00
1/2" (13) 593248001 N/A 542788309 N/A 124.00
125.00
5/8" (17) 593248101 N/A 542788191 542788318 126.00
542788319 127.00
3/4" (19) 593248201 593248901 542788339 542788320 140.00
542788321 145.00
7/8" (22) 593248301 593249001 542788340 542788322 155.00
542788323 163.00
CORE DRILLS 1" (25) 593248401 593249101 542788190 542788324 170.00
542788336 174.00
1-1/8" (29) 593248501 593249301 542788341 542788337 179.00
542788338
1-1/4" (32) 593248601 593249401 542788342

1-3/8" (35) 593248701 593249501 542788343

1-1/2" (38) 593248801 593249601 542788344

1-5/8" (42) N/A 593249701 N/A

1-3/4" (44) N/A 593249801 N/A

1-7/8" (48) N/A 593249901 N/A

Total segment height for this series is .400" (.300" diamond depth; .100" segment base).

138

CORE DRILLS

Husqvarna Vari-Drill Series

PROFESSIONAL BITS

• B10: turbo core bit for highly reinforced concrete.
• B20: longer life in flint and hard aggregate with high steel reinforcement
• B30: longer life in medium to hard concrete with medium to high steel reinforcement
• B80: longest life in asphalt and soft/abrasive concrete
• B20 Prestress: narrow spacing for prestressed concrete
• 3/8" to 1-1/2" bits have a 5/8"-11 adapter. Bits 1-5/8" and above have a 1-1/4" - 7 thread

adapter

Z-EDGE STRAIGHT STRAIGHT STRAIGHT STRAIGHT

Diameter WET CUTTING CORE DRILLS

Inches mm B10 B20 B30 B80 List Price B20 Prestress List Price
$103.00
1 25 593947801 593070202 $170.00
104.00 593980501 183.00
1-1/8 29 593947802 106.00 593070203 208.00
121.00 593980502 212.00
1-1/4 32 593947803 141.00 593070204 201.00
147.00 593980503 247.00
1-1/2 38 593947804 150.00 593070205 268.00
163.00 593070206 303.00
1-3/4 44 593947805 184.00 593980504 330.00
187.00 593980505 350.00
1-7/8 48 593947806 202.00 593070207 382.00
593980506 422.00
2" 51 592880801 592880901 592881001 541060145 237.00 593070208 456.00
268.00 593980507 494.00
2-1/4" 57 592880802 592880902 592881002 541060146 291.00 593980508 561.00
310.00 593980509 664.00
2-1/2" 63 592880803 592880903 592881003 541060147 338.00 593980510 768.00
374.00 593980511 876.00
2-3/4" 70 592880804 592880904 592881004 541060148 404.00
438.00 593980512 1,106.00
3" 76 592880805 592880905 592881005 541060149 496.00 593980513 1,251.00
588.00 593980514 1,339.00
3-1/4 680.00
775.00
3-1/2" 89 592880806 592880906 592881006 541060151 869.00
979.00
4" 100 592880807 592880907 592881007 541060152 1,107.00
1,185.00
4-1/4" 108 592880808 592880908 592881008 541060153

4-1/2" 114 592880809 592880909 592881009 541060154

5" 127 592880810 592880910 592881010 541060155

5-1/2" 140 592880811 592880911 592881011 541060156

6" 152 592880812 592880912 592881012 541060157

6-1/4" 159 592880813 592880913 592881013 541060158

7" 178 592880814 592880914 592881014 541060160

8" 203 592880815 592880915 592881015 541060161

9" 228 592880816 592880916 592881016 541060162

10" 254 592880817 592880917 592881017 541060163

11" 280 592880818 592880918 592881018 541060164

12" 305 592880819 592880919 592881019 541060165

13" 330 592880820 592880920 592881020

14" 356 593070201 592880921 592881021

Total segment height for this series is .400" (.300" diamond depth; .100" segment base).

139

Husqvarna Elite-Drill Extended Core Travel NEW

PROFESSIONAL BITS

• B1420: fast drilling with a longer life in flint and hard aggregate with high steel reinforcement
• B1425: fast drilling in flint concrete with or without steel reinforcement
• Core bit lengths not listed cost 10% more than the list price of the next longest listed core travel

WET CUTTING

Diameter 24" Core Travel 36" Core Travel 48" Core Travel
Inches
1/2 B1420 B1425 LIST PRICE B1420 B1425 LIST PRICE B1420 B1425 LIST PRICE
5/8 $139.00
3/4 596242701 140.00 596242703 $163.00 596232301 $187.00
7/8 150.00
1 596242702 152.00 596242704 164.00 596242705 188.00
1-1/8 153.00
1-1/4 542788533 176.00 501279501 186.00 596242706 222.00
1-3/8 181.00
1-1/2 542788534 190.00 542788417 188.00 596242707 224.00
1-3/4 198.00
CORE DRILLS 1-7/8 596038401 219.00 596137001 189.00 596141301 225.00
2 224.00
2-1/4 596038402 221.00 596137002 224.00 596141302 272.00
2-1/2 305.00
2-3/4 596038403 274.00 596137003 229.00 596141303 277.00
3 290.00
3-1/4 596038404 306.00 596137004 238.00 596141304 286.00
3-1/2 335.00
4 595026801 365.00 596137005 246.00 595026901 294.00
4-1/4 400.00
4-1/2 596038405 458.00 596137006 279.00 596141305 339.00
5 505.00
5-1/2 596038406 533.00 596137007 284.00 596141306 344.00
6 702.00
6-1/4 596038407 644.00 596137008 281.00 594730301 341.00
7 630.00
8 596038408 836.00 596137009 377.00 596141307 449.00
9 880.00
10 596038409 1,052.00 594956501 346.00 594956502 418.00
11 1,132.00
12 596038410 1,511.00 596137010 362.00 596141308 434.00
13 1,455.00
14 596038411 1,950.00 594956503 378.00 594956504 450.00
1,828.00
596038412 596137011 419.00 596141309 503.00

596038413 594956505 449.00 594956506 533.00

596038414 596137012 496.00 596141310 592.00

596038415 596137013 554.00 596141311 650.00

594956507 594956508 625.00 594956509 745.00

596038416 596137014 665.00 594956510 797.00

596038417 596137015 858.00 596141312 1,014.00

596038418 594956511 800.00 594956512 956.00

596038419 596137016 810.00 596141313 990.00

596038420 594738101 1,040.00 596141314 1,244.00

594077001 596137017 1,072.00 596141315 1,264.00

594956516 594956517 1,328.00 594956518 1,604.00

596038421 596137018 1,432.00 596141316 1,732.00

596038422 596137019 1,871.00 596141317 2,231.00

596038423 596137020 1,875.00 596141318 2,295.00

596038424 596137021 2,430.00 596141319 2,910.00

596038425 596137022 2,368.00 596141320 2,908.00

140

CORE DRILLS

Husqvarna Vari-Drill Extended Core Travel NEW

PROFESSIONAL BITS
• BannerLine: General purpose drilling of concrete with soft to hard aggregate and light to medium

steel reinforcing, masonry, brick, granite, marble, stone

• B10: Z-EDGE core bit for highly reinforced concrete
• B30: longer life in medium to hard concrete with medium to high steel reinforcement
• Core bit lengths not listed cost 10% more than the list price of the next longest listed core travel

Diameter BannerLine 24" Core Travel LIST PRICE 36" Core Travel WET CUTTING
589687401 $126.00
Inches 589687601 B10 B30 127.00 B30 LIST PRICE 48" Core Travel
1/2 542786967 128.00
5/8 589687701 129.00 B30 LIST PRICE
3/4 587751201 130.00
7/8 542788366 141.00 CORE DRILLS
1 542788021 143.00
1-1/8 589687801 153.00
1-1/4 542787555 157.00
1-3/8 589688201 187.00
1-1/2 589317301 196.00
1-3/4 196.00
1-7/8 594101501 218.00 594101801 $256.00 596201201 $316.00
2 595934201 239.00 595958101 290.00 596201202 362.00
2-1/4 595934202 242.00 595958102 311.00 596201203 383.00
2-1/2 595934203 256.00 595958103 314.00 596201204 386.00
2-3/4 594101502 282.00 594101802 328.00 594005401 400.00
3 595934204 300.00 595958104 366.00 596201205 450.00
3-1/4 594101503 340.00 594101803 384.00 596201206 468.00
3-1/2 594101504 363.00 594101804 436.00 596201207 532.00
4 595934205 401.00 595958105 459.00 596201208 555.00
4-1/4 595934206 438.00 595958106 521.00 596201209 641.00
4-1/2 594101505 493.00 594101805 570.00 596201210 702.00
5 595934207 522.00 595958107 649.00 596201211 805.00
5-1/2 594101506 575.00 594101806 678.00 596201212 834.00
6 595934208 652.00 595958108 755.00 596201213 935.00
6-1/4 595934209 61.00 595958109 856.00 596201214 1,060.00
7 595934210 890.00 595958110 989.00 596201215 1,217.00
8 595934211 1,002.00 595958111 1,166.00 596201216 1,442.00
9 595934212 1,144.00 595958112 1,302.00 596201217 1,602.00
10 595934213 1,300.00 595958113 1,504.00 596201218 1,864.00
11 595934214 1,475.00 595958114 1,720.00 596201219 2,140.00
12 595934215 1,600.00 595958115 1,955.00 596201220 2,435.00
13 595934216 2,049.00 595958116 2,140.00 596201221 2,680.00
14 2,216.00
16 593954909 2,383.00 542775860 5,303.00
18 593954910 2,478.00 593070310 6,557.00
20 593954911 2,584.00 593070311 10,795.00
22 593954912 3,378.00
24 593954913 3,873.00
26 593954914 4,255.00
28 593954915 4,850.00
30 593954916 5,303.00
34 593954917
36 593954918
42
48

141

Husqvarna Banner Line®

GENERAL PURPOSE BITS
• General purpose drilling of concrete with soft to hard aggregate and light to medium steel

reinforcing, masonry, brick, granite, marble, stone
• 3/8" to 1-1/2" bits have a 5/8"-11 adapter. Bits 1-5/8" and above have a 1-1/4" - 7 thread

adapter

STRAIGHT

Diameter WET CUTTING

CORE DRILLS Inches mm Item No. List Price
$98.00
Banner Line®, 3/8" 10 542786634* 99.00
100.00
Banner Line®, 1/2" 13 542786635* 101.00
102.00
Banner Line®, 5/8" 17 542786636* 103.00
104.00
Banner Line®, 3/4" 19 542780100* 106.00
116.00
Banner Line®, 7/8" 22 542780101* 121.00
141.00
Banner Line®, 1" 25 542780102 147.00
150.00
Banner Line®, 1-1/8" 29 542780103 163.00
184.00
Banner Line®, 1-1/4" 32 542780104 187.00
202.00
Banner Line®, 1-3/8" 35 542780105 218.00
237.00
Banner Line®, 1-1/2" 38 542780106 268.00
291.00
Banner Line®, 1-3/4" 44 542780107 310.00
338.00
Banner Line®, 1-7/8" 48 542780108 374.00
404.00
Banner Line®, 2" 51 542780109 438.00
496.00
Banner Line®, 2-1/4" 57 542780110 588.00
680.00
Banner Line®, 2-1/2" 63 542780111 775.00
869.00
Banner Line®, 2-3/4" 70 542780112 964.00
1,048.00
Banner Line®, 3" 76 542780113 1,132.00

Banner Line®, 3-1/4" 83 542780114

Banner Line®, 3-1/2" 89 542780115

Banner Line®, 4" 100 542780116

Banner Line®, 4-1/4" 108 542780117

Banner Line®, 4-1/2" 114 542780118

Banner Line®, 5" 127 542780119

Banner Line®, 5-1/2" 140 542780120

Banner Line®, 6" 152 542780121

Banner Line®, 6-1/4" 159 542780122

Banner Line®, 7" 178 542780123

Banner Line®, 8" 203 542780124

Banner Line®, 9" 230 542780125

Banner Line®, 10" 254 542780126

Banner Line®, 11" 280 542780127

Banner Line®, 12" 305 542780128

Banner Line®, 13" 330 542780129

Banner Line®, 14" 350 542780130

Total segment height for this series is .400" (.200" diamond depth; .100" segment base)
*Crown bits

142

CORE DRILLS

Husqvarna Tacti-Drill B10 Series

GENERAL PURPOSE BITS
• Fast drilling in concrete with or without steel reinforcement, brick, block, stone

TURBO

Diameter B10 WET CUTTING

Inches mm Item No. List Price
$134.00
2 51 593070601
155.00
2-1/2 63 593070602 170.00
196.00
3 76 593070603 211.00 CORE DRILLS
263.00
3-1/2 89 593070604 304.00
433.00
4 100 593070605 659.00
865.00
5 127 593070606

6 152 593070607

8 203 593070608

10 254 593070609

12 305 593070610

Total segment height for this series is .300" (.200" diamond depth; .100" segment base).

Shaft Extensions

Model Thread Length - in. (mm) Item no. P
T-410006 1-1/4"-7 6 (152) 541400067 List Price
T-415007 5/8"-11 6 (152) 541400066
T-415012 5/8"-11 12 (305) 541400070 $68.00
T-420012 1-1/4"-7 12 (305) 541201737 50.00
T-420024 1-1/4"-7 24 (600) 541404607 70.00
94.00
129.00

Threaded Shaft Adapters 3-Piece Expansion
Adapters for Open End
Model Female Male Item no. P Bits Item no. P
T-420410 1-1/4"-7 1/2"-20 541404608 List Price 542751273 List Price
T-420415 1-1/4"-7 5/8"-11 541201736 Diameter - in. (mm) 542751274
T-415410 5/8"-11 1/2"-20 541404609 $76.00 1-1/4 (32) 542751267 $77.00
T-415420 5/8"-11 1-1/4"-7 541404610 55.00 2 (51) 542751276 98.00
T-410415 1/2"-20 5/8"-11 541404611 84.00 2-1/2 (64) 542751277 112.00
DM100-1 M-18 5/8"-11 541404612 84.00 3 (76) 542751278 129.00
DM100-2 M-18 1-1/4"-7 541404613 174.00 4 (100) 542751279 149.00
50.00 4-1/2 (114) 180.00
79.00 6 (152) 232.00

143

Husqvarna Threaded Crown Bits and Extensions

• Increase drilling depth capabilities
• Available in bit diameters of 1"-6" and comes standard with a 14" core travel
• Tube extensions can be purchased in lengths of 12" and 24" for deeper drilling. Available only in Elite-Drill 1430

specification

• 12-gauge tubing for bits 3" in diameter and smaller. 11-gauge tubing for bits larger than 3". Threaded connections are 4 TPI
• .125" wall recommended for drilling up to 20' deep

PROFESSIONAL

A Diameter 1-1/4"-7 Adapter + 12" Tube + List Price
Threaded Crown

Inches mm

1 8 TPI 25 588419701 $ 592.00

CORE DRILLS 0.188" 0.125" Wall Tubing 1-1/4 8 TPI 32 588419801 616.00

1-1/2 8 TPI 38 588419901 634.00

B 2 4 TPI 51 588420001 653.00
2-1/2 4 TPI 64 588420101 740.00

3 4 TPI 77 588420301 802.00

3-1/2 4 TPI 89 588420401 879.00

4 4 TPI 100 588420501 950.00

4-1/2 4 TPI 114 588420601 1,297.00

5 4 TPI 127 588420701 1,411.00

C 6 4 TPI 152 588420801 1,597.00

Total segment height for this series is .400" (.300" diamond depth; .100" segment base).

ADAPTERS C A B B B

0.188" 0.125" Wall Tubing Diameter Replacement List Price Replacement List Price Tube List Price Tube List Price Tube List Price
Inches mm Crown Adapter 1ft 2ft 4ft
$258.00 $124.00 $82.00 $96.00 $134.00
1 25 587794601 268.00 587817201 130.00 587815601 84.00 587815701 98.00 587815801 139.00
1-1/4 32 587794602 278.00 587817202 132.00 587815602 88.00 587815702 100.00 587815802 144.00
1-1/2 38 587794603 288.00 587817203 134.00 587815603 91.00 587815703 102.00 587815803 149.00
2 51 587794604 340.00 587817204 149.00 587815604 97.00 587815704 124.00 587815804 165.00
2-1/2 64 587794605 371.00 587817205 165.00 587815605 101.00 587815705 134.00 587815805 180.00
3 77 587794606 402.00 587817206 180.00 587815606 113.00 587815706 175.00 587815806 216.00
3-1/2 89 587794607 422.00 587817207 201.00 587815607 124.00 587815707 185.00 587815807 247.00
4 100 587794608 443.00 587817208 361.00 587815608 165.00 587815708 237.00 587815808 361.00
4-1/2 114 587820901 474.00 587822201 402.00 587822001 175.00 587821001 258.00 587822101 381.00
5 127 587820902 525.00 587822202 464.00 587822002 196.00 587821002 283.00 587822102 402.00
6 152 587820903 587822203 587822003 587821003 587822103

144

CORE DRILLS

Husqvarna Dri Vacuum Drill Bits™ NEW

GENERAL PURPOSE, MASONRY BITS

• DRI5: Dry drill through bricks
• DRI8: Dry drill through blocks
• 10" (254 mm) core travel

Diameter 5/8-11 Thread 1-1/4"-7 Thread 5/8-11 Thread 1-1/4"-7 Thread DRY DRILLING

Inches mm DRI5 Vacuum DRI5 Vacuum DRI8 Vacuum DRI8 Vacuum List Price
$106.00
1 26 594947101 542788330 595869401 542788352
108.00
1-1/4 32 594979101 542788331 595869402 542788353 115.00
125.00
1-1/2 38 594060001 542788332 595869403 542788354 137.00 CORE DRILLS
160.00
1-3/4 44 594060002 542788263 595869404 542788355 195.00
221.00
2 51 594060003 542788264 595869405 542788356 230.00
287.00
2-1/2 63 594060005 542788265 595869407 542788357 339.00
349.00
3 76 594060006 542788266 595869408 542788358

3-1/2 89 594060007 542788267 595869409 542788359

4 100 594060008 542788268 595869410 542788360

4-1/2 114 594060009 542788269 595869411 542788361

5 127 594060010 542788270 595869412 542788362

6 152 594060011 542788271 595869413 542788363

Total segment height for this series is .400" (.300" diamond depth; .100" segment base).

Husqvarna Banner Line® Handheld

GENERAL PURPOSE BITS

• Banner Line® Handheld general purpose drilling with a handheld drill
• Thin-wall tubing makes them lightweight and easy to control
• 5/8"-11 thread
• 10" core length

Diameter

Inches mm Item No. List Price
$99.00
1 25 542751170 115.00
132.00
1-1/4 32 542751172 147.00
155.00
1-1/2 38 542751174 164.00
178.00
1-5/8 42 542751175 201.00
211.00
1-3/4 44 542751176 220.00
259.00
2 51 542751178 293.00

2-1/4 57 542784451

2-1/2 63 542784452

2-3/4 70 542784453

3 76 542784454

3-1/2 89 542784456

4 100 542784457

Total segment height for this series is .200" (.200" diamond depth; .100" segment base).

145

Husqvarna Dri Bit™ Self-Centering Kits Disassembled Assembled

GENERAL PURPOSE, MASONRY Allen 5/8"-11
Wrench Adapter
• Easy to start a hole with a handheld core drill. The carbide-tipped centering bit helps
stabilize the core bit until it penetrates the surface being drilled Set Screw

• After the core bit is sufficiently started, the starter bit is easily and quickly removed
by loosening the set screw in the adapter

• There are many uses for these kits, particularly for horizontal and corner drilling

COMPLETE KIT (STABILIZING DISK, ADAPTER, ALLEN WRENCH)

Diameter

Inches mm Item No. List Price
542751179 $84.00
1-1/2 38 542751180 84.00
542751181 85.00
1-3/4 44 542751182 85.00 Carbide-tipped
542751183 85.00 Bit
CORE DRILLS 2 51 542751184 87.00
542751185 87.00 Stabilizing Disk
2-1/4 57 542751186 88.00
542751187 90.00 Ideal for plumbers
2-1/2 64 542751188 91.00 and electricians.
542751189 92.00
3 76 542751190* 157.00

3-1/2 89

4 100

4-1/2 114

5 127

6 152

1-1/2 - 6 38-152

*Includes complete set of stabilizing disks.

SELF-CENTERING KIT REPLACEMENT PARTS Item No. List Price
542751191 $32.00
Diameter 542751192 50.00
Inches 542751193 6.00
5/8" - 11 adapter 542751194 5.00
Carbide-tipped bit 3/8" x 12" 542751195 12.00
Set screw 542751196 13.00
Allen wrench 542751197 13.00
1-1/2" stabilizing disk 542751198 13.00
1-3/4" stabilizing disk 542751199 14.00
2" stabilizing disk 542751200 15.00
2-1/4" stabilizing disk 542751201 16.00
2-1/2" stabilizing disk 542751202 17.00
3" stabilizing disk 542751203 18.00
3-1/2" stabilizing disk 542751204 19.00
4" stabilizing disk 542751205 24.00
4-1/2" stabilizing disk
5" stabilizing disk
6" stabilizing disk

146

CORE DRILLS

Husqvarna Wizzard Bit Assembly Wizzard Bit
(Components)
• A combination of retractable carbide metal cutting hole saw and a diamond bit
• Drill through 4-1/4" to 4-1/2" of concrete until the metal duct is reached. The diamond bit

can then be raised and the carbide hole saw is extended. Continue to drill through the
metal duct “dry”

• This tool provides a fast solution to recessed inserts in Walker Duct
• The Wizzard uses 1-1/4" – 7 thread pattern

WIZZARD BIT Size - Inches (mm) Item No. List Price Wizzard Bit CORE DRILLS
Diameter 2-1/2" core/2-1/4" hole 542751264 $782.00 (Assembled)
Wizzard bit assembly 2-3/4" core/2-1/2" hole 542751265
Wizzard bit assembly 542751266 799.00 Wizzard
Wizzard 2-1/2 (63) 542751267 468.00
Expansion adapter 2-3/4 (70) 542751268 112.00
2-1/4 (57) 542751269 155.00
Carbide hole saw 2-1/2 (63) 542751270 153.00
172.00

OPEN ENDED BITS Size - Inches (mm) Item No. List Price
Diameter 2-1/2 (63) 542751271 $267.00
Diamond bit 2-3/4 (70) 542751272 280.00
Diamond bit

DIMENSIONS Sizes - Inches (mm)

Overall length 18 (457)
Overall length with carbide tip extended 18-3/4 (476)
Core bit length
Core bit cutting depth 8-1/2 (216)
Extended carbide tip depth 4-1/4 (106)

Ideal for electrical contractors 3/8 (10)

Diamond
Bit

Expansion
Adapter

Carbide Hole
Saw

147

Elite-Drill Crown Rings

ELITE-DRILL B1420 CROWN RING
TOTAL SEGMENT HEIGHT: .400" (.300" DIAMOND DEPTH; .100" SEGMENT BASE)

Diameter Item No. List Price

1/2" 593070701 $84.00

5/8" 593070702 87.00

3/4" 593070703 89.00

7/8" 593070704 92.00

1" 593070705 94.00

1-1/8" 593070706 100.00

1-1/4" 593070707 109.00

1-3/8" 593070708 117.00

1-1/2" 593070709 119.00

1-5/8" 593070710 126.00

1-3/4" 593070711 132.00

CORE DRILLS 1-7/8" 593070712 138.00

Segments for Retipping

ELITE-DRILL SEGMENTS FOR RETIPPING

Diameter B1420 B1430 List Price
2" x .140 593070713 593070102 $35.00
2-1/2" x .140 593070714 593070103 35.00
3" x .140 593070715 593070104 35.00
4" x .160 593070716 593070105 35.00
5-6" x .160 593070717 593070106 35.00
7-8" x .180 593070718 593070107 35.00
9"+ x .200 593070719 593070108 39.00
9"+ x .250 593070720 593070109 41.00

VARI-DRILL SEGMENTS FOR RETIPPING B80
593070801
Diameter B20 B30 593070802 List Price
Inches 593070315 593070501 593070803 $31.00
2" x .140 593070316 593070502 593070804 31.00
2-1/2" x .140 593070317 593070503 593070805 31.00
3" x .140 593070318 593070504 593070806 31.00
4" x .160 593070319 593070505 593070807 31.00
5-6" x .160 593070320 593070506 593070808 31.00
7-8" x .180 593070321 593070507 35.00
9"+ x .200 593070322 593070508 37.00
9"+ x .250

148

CORE DRILLS CORE DRILLS
149

THE FORMULA FOR UNBEATABLE
PRODUCTION RATES

Preparing, grinding and polishing of concrete floors as well as repairing and polishing of terrazzo and other natural stone, are
demanding jobs. Our mission is to enable you to perform at your maximum potential by providing you with a system that
outperforms any competition. The formula for unbeatable production rates includes our patented Dual Drive Technology™, wireless
remote control machines, PG 820 RC and PG 680 RC, and the efficient dust management range. Our product range also extends to
easily transportable, efficient small grinding and polishing models for the professional and homeowner. All Husqvarna PG machines,
are equipped with our quick-fit Redi Lock® diamond tool system.

Range overview

The range of Husqvarna floor grinders currently consists of seven models with grinding widths from 11 in to 32 in,
4 hp to 17 hp power and weighing from 190 to 970 lbs. You can always find a Husqvarna PG model for your project.

GRINDING Grinding and polishing Planetary Removal and preparation Scarifier
HEAD Planetary with Dual Drive Single disc CG 200

PG 820 RC + PG 820 PG 680 RC + PG 680 PG 530 PG 530 PG 450 PG 400 PG 280 CG 200
1-phase 1-phase 3/1-phase 1-phase 1-phase
3-phase 3-phase 3-phase
21 (530) 18 (450) 16 (400) 11 (280) 7.8 (280)
32 (820) 27 (680) 21 (530)

GRINDING
WIDTH
in (mm)

16 16 17 hp 17 hp
(12) (12) 12.5kW 12.5 kW

11 11 9 hp
(8) (8) 6.3 kW
POWER 5
(4) 6 hp 5 hp 5 hp
hp (kW) 4.75 kW 3.75 kW 4 kW

5 3 hp 4 hp
(4) 2.2 kW 3 kW

3-phase
1-phase

00 80 ft2/hr 80 ft2/hr 00
7.4 m²/hr 7.4 m²/hr 500 sq ft/hr500
430 430 330-880 ft2/hr 275-660 ft2/hr 150-300 ft2/hr 80-300 ft2/hr 150 ft2/hr
(40) (40) 375-1100 ft2/hr 325-760 ft²/hr 15 – 30 m²/hr 8 – 25 m²/hr 225 ft2/hr 14 m²/hr
PRODUCTION 30 - 80 m2 /hr 21 m²/hr
RATES* 35 - 95 m2 /hr 25-60 m2/hr 300-550 ft2/hr 280-450 ft2/hr 400 ft2/hr
sq8f6t.0(m²/h) 860 30-75 m²/hr 30 – 50 m²/hr 20 – 40 m²/hr 37 m²/hr
(80) (80)
880-1320 ft2/hr 660-1100 ft2/hr 500 ft2/hr
1100-1550 ft2/hr 760-1300 ft2/hr 46 m²/hr

80-120 m2/hr 70-115 m2/hr
95-145 m2/hr 80-120 m²/hr

13000 13000 *Bold denotes PG 820 RC & PG 680 RC
(120) (120)