M - Climbing Equipment

Climbing Equipment

Index M5-M6 Handline, Hooks, M22-M24 CLIMBING
Blocks & Tackles M27 EQUIPMENT
Bashlin Belts M9 M7
M19 Handbooks M8
Buckingham Belts M20-M21 Jelco Belts M25-M26
Climber Accessories M16-M17 Klein Belts M2-M3
Climber Pads & Guards M12 Lifelines & Rescue Training M4
Climbers, Straps & Gaffs M10-M13 Lineman’s Kit M6-M11
Climbing Straps Ordering & Sizing Belts Guide M14
Fall Protection Systems M18 Secondary Straps
Gaff Inspection & M15 Tool Holders & Pouches

Maintenance Guide
Glove, Nut & Tool Bags

A. B. Linthee mOrigainnal’s Kit
The Original Lineman’s Kit is perfect for linemen and apprentices.
Everything you need to get started is in this kit. If you are just starting
C. out, or just need new gear, this is the kit for you.
A. Klein Pole Climbers with 1 1/2” Gaffs - 8” x 8” cushioned, high-grade
leather climber pads. 4 7/16” wide stirrup provides greater foot support.
Cat. No. CN1972AR
Adjustable climber length: 15” - 19”

B. 10” Lineman’s Boots - Climb high with the confidence that a heavy-
duty steel shank and a grippy Vibram® sole are providing solid support.
Meanwhile, your foot will enjoy the all-day comfort of a soft lining, a

D. heat and moisture managing foot bed and a cushioned, anti fungal
insole.

F. C. Klein Deluxe Full-Floating Body Belt - Belt pad is laced
and stitched with two pocket tabs. 5” width. 1 3/4” wide belt

E. strap covered with top-grain harness leather. Full-floating
D-ring web strap with straight double-bar D-rings.
Cat. No. 5278N


D. Klein Positioning Strap - 6-ply, 1 3/4” wide Klein-
Kord®, a strong, flexible fabric. 6’ in length.
Cat. No. KG5295-6L


E. Quick Release Snap Nut and Bolt Bag - Vinyl nut and bolt
bag with quick release snap. Cat. No. 10-105

G. F. Pyramex Aventé High Impact Safety Glasses - Black frame with
gray lenses. ANSI Z87.1-2003 Cat. No. SB4520D

G. Lineman’s Double-Face Hammer - 3 3/4” forged, tempered-steel head.
Identical faces with 1 3/4” round-crown driving surface. Cat. No.809-36

I. H. Klein Standard Lineman’s Wrench - Each end has two different
openings. Large:13/32” & 29/32”. Small: 13/16” & 5/8”. Cat. No. 3146

I. Bashlin 5 Pocket Tool Holster with Front Hook Cat. No. 111HLDS

J. Klein 9” High-Leverage Side-Cutting Pliers - Cuts ACSR, screws, nails
and most hardened wire. High-leverage design. Cat. No. D2000-9NE

K. Klein 3/8” Keystone-Tip Screwdriver - 8” Heavy-Duty Round-Shank.
Cat. No. 602-8

J. L. Klein 10” Adjustable Wrench - Capacity allows use of a smaller size
K. wrench to handle bigger jobs. Cat. No. 507-10
L.
H. M. M. Klein Lineman’s Ratcheting Box Wrench - 9/16” and 3/4“ sizes.
Cat. No. KT203

N. N. Klein 6’ Fiberglass Folding Rule - Locking joints and stainless steel
spring hinges. Marked on both edges. Graduate to 1/16th”. Cat. No. 911-6

O. O. Klein Lineman Skinning Knife - Hook Blade, Notch & Ring. Three-inch
steel blade withstands frequent scoring and slitting. Cat. No. 1570-3

P. Klein Snap-On Gaff Guard - Coil-spring, plastic coated guard quickly
P. Q. snaps onto pole climbers. Cat. No. 1972G

Q. Non-Conductive Nylon Hand-Line Break-Away Belt Hook - Specially
designed to break if wearer experiences a sudden tug or pull. Cat. No. H-7

R. Bullard Yellow Full-Brim Hard Hat - Fits all heads. Replaceable brow
R. pad. 4 pt. ratchet suspension.
Cat. No. S71R-Y

S. American Safety Work Gloves with Grain Leather Palms
- Gunn pattern and shirred elastic back, knuckle strap style,
Cat. No. 1-936L
and 4” rubberized cuff.

T. American Safety Orange Vinyl Gear Bag - Nylon
frame, strong and lightweight, flexible yet keeps its shape.
Cat. No. 62-630
S. Rain flap and outside pocket.
T.
Cat. No. Description
LAK1 Original Lineman’s Kit

Lineman’s Kit with Fall Protection

Same as Original Lineman’s Kit but with Klein PoleMaster™ and
Adjustable Secondary Safety System Included. Minus KG5295-6L.

U. Klein PoleMaster™

• Connecting hardware conforms to ASTM F887,
ANSI Z359.12 and CSA Z259.12, Class I requirements.

• Abrasion resistant inner strap material for durability -
includes a red wear indicator.

• Outer strap constructed of Klein-Kord® material - a proven
material for years with lineman.

• Wood Pole diameter range from 8” to 16”
• Cam bracket system for easy adjustments.
• Self-closing and self-locking carabiner for easy disconnect

from around the pole.
• Vinyl Storage Bag includes a zippered pocket for instructions.
• The Wood Pole Fall Restriction Device has been designed

to meet CSA Z259.14-01 standard as a Type A Fall
Restrict Device. Do NOT use on icy poles. Also meets or
exceeds ANSI Z359.3, ASTM F887; OSHA 1910, 1926.
• Made in USA
• Ship Wt. 6.4 lbs.

Cat. No. FPD-5295

U.

V. The Adjustable Secondary Safety is a 1/2” x 6’ Tytan double braided polyester rope with read
wear indicator, manufactured in the USA. It is covered in a 12 mil shrink to resist wear and allows
for smoother operation. It also features an ULTRA-SAFE forged aluminum double locking snap-
hook that meets the ANSI 3,600 lb. side load rating and which weighs less without being harder
to open. The rope grab is a Puma Grab model FP-7208-AL. Both meet theCaAtN. SNIoZ. 375090.10--R2018909-96.


12 mil. shrink 1/2” x 6’ double
around rope braided polyester

Blue color distinguishes V. rope
Secondary Safety Snap from

Primary Safety Snap

Cat No. Description
LAK1-FP Lineman’s Kit w/Fall Protection

American Safety Utility Corporation
www.americansafety.com
Call Toll Free 1-800-438-6013

CLIMBING EQUIPMENT“D” Size Ordering Bashlin Belts

M4 Bashlin Belts Sizing:
Proper sizing is one of the most important considerations in the
1. purchase of a lineman’s tool belt. An improperly sized belt is
2. uncomfortable and may cause an accident or injury.

3. Bashlin tool belts are measured by the ”D” size, which is the
distance between the heels of the D-rings.
www.americansafety.com
All Lineman’s tool belts must be ordered according to the “D”
size.
To Find Your “D” Size:
1. Locate the point where the heel of the “D” ring should rest. As
the photo illustrates, this is approximately 4” down from the top of
the hip bone.
2. Begin to measure from this point. Measure around the buttocks
to the same point on the opposite side.
3. When a properly sized tool belt is worn, the “D” rings will point
nearly straight ahead and the tongue adjustment will be in the
center holes. The tongue buckle section is sized in relation to the
“D” measurement. There are normally nine holes in the tongue, 1”
apart, allowing 8” of adjustment.

To properly size the Padded Rest-A-Back or Hip-Grip tool
belts, add 2” to your standard “D” measurement.

Belt Adjustment in Inches - Per ASTM F887

D Size Minimum Center Hole Maximum Loops
D18 32 36 40 3
D19 33 37 41 3
3
D20 34 38 42 4
D21 36 40 44 4
D22 37 41 45 4
4
D23 38 42 46 4
D24 40 44 48 4
D25 41 45 49 4
4
D26 42 46 50
D27 44 48 52
D28 45 49 53

Features of Bashlin Belts:

S-Shaped D-Rings - This is Bashlin’s original design. The toe lies
away from the belt for easier snap engagement, while the curve
recedes pressure on the hip for comfort.

CLIMBING All Leather Cushion Section - The glove soft, rolled edge cush-
EQUIPMENT ion provides for a belt which is cooler in the summer, yet flexible in
cold weather.

Top Quality Material - We utilize the highest quality hardware,
nylons and leathers available.

Bashlin Craftsmanship - Years of quality manufacturing are
built into each product for a subtle, yet meaningful difference. We
encourage side by side comparison.

24 hour Fax (704) 481-0450

A. Bashlin’s Lineman’s Belt #88 - Superior design and performance CLIMBING EQUIPMENT
make this belt the industry standard. It combines a padded, contour
M5Bashlin Belts
cushion section with flares for the shifting D-rings with a 5 1/2” back.
A.
This belt gives excellent support and climbing comfort. It is a practical
C.
belt with wearable quality which makes it economical. D.

Cat. No. Color Ship Wt. E. F.
88-(“D” Size) Tan 6.5 lbs.
Call Toll Free (800) 438-6013
88X-(“D” Size) Black Black 6 lbs.

——————————

Bashlin’s Back Support Tool Belts help relieve strain and fatigue.
They are available in the Rest-A-Back or Hip-Grip design. The 88
series belts are shown with the back support options, but they are
also available in the 71N, 72HR, 76, 160N, 160NL and 1511N styles.
Please note that the standard belts are not padded, but padding is
available. (See 88BP & 88GP) Look to upper tongue adjustment to
determine the proper size. Custom belts are available at an additional
charge. Additional charge for sizes D-29 to D-32.

B. Rest-A-Back Tool Belt Description Ship Wt. B.
Cat. No. Rest-A-Back 8.5 lbs.
88B-(“D” Size) Padded Rest-A-Back 9 lbs.
88BP-(“D” Size) Rest-A-Back 8.5 lbs.
88BX-(“D” Size) Black

Rest-A-Back Sizing Chart

Upper Tongue Adjustment Upper Tongue Adjustment Upper Tongue Adjustment
D18 29-36”
D19 30-37” D23 34-41” D28 39-46”
D20 31-38”
D21 32-39” D24 35-42” D29 40-47”

D25 36-43” D30 41-48”

D26 37-44”

D22 33-40” D27 38-45”

C. Hip-Grip Tool Belt Description Ship Wt.
Cat. No. Hip-Grip 8.25 lbs.
88G-(“D” Size) Padded Hip-Grip
88GP-(“D” Size) Hip-Grip 9 lbs.
88GX-(“D” Size) Black 8.5 lbs.

Hip-Grip Sizing Chart

Upper Tongue Adjustment Upper Tongue Adjustment Upper Tongue Adjustment

D18 33-39” D23, D24 34-41” D27, D28 43-49”

D19, D20 35-41” D25, D26 41-47” D29, D30 45-51”

D21, D22 37-43”

——————————

D. The Bashlin Deluxe is a field-tested, proven design. It is one of
the original semi-floating, shifting “D” belts. The shifting “D”s reduce

chafing and bumps on the hips. The 5” cushion pad is soft and breaks

in easily. The harness leather tool loops and tongue and buckle

section are designed for rugged wear. (Ship Wt. 6.25 lbs.)

Cat. No. 60FH-(“D” Size)

——————————

E. The Sam Brown Suspenders all leather suspenders ease the
weight of the tools and line belt. One size fits most. (This is not a
safety belt.)(Ship Wt. 1.25 lbs.) CLIMBING
Cat. No. 80 EQUIPMENT

——————————

F. The Supporter Strap (or “gut” strap) distributes weight of the belt
and tools. Made from top quality russet leather with 4 adjustable drop

straps. (This is not a safety belt.)
Cat. No. Description Ship Wt.
81 Work belt, fits up to 46” 1.5 lbs.

81-1 Loop & snap replacement gut strap 0.25 lbs.

[email protected]

M6 CLIMBING EQUIPMENT

B. Bashlin Belts & Pole Straps

A. Bashlin 4 D-Ring Tool Belt - Bashlin’s Q88GX4DMP and
88MX4DMP belts hug the hips and has extra D-rings for
A. carrying a secondary lanyard. The upper Ds
are positioned in just the right place. The arc
resistant cushion promotes cooling and
ventilation. It is soft and requires no break-in.
This belt is offered with or without an upper
tongue.

Cat. No Description Ship. Wt.
Q88GX4DMP 4 D-Ring Tool 5.3 lbs.
88MX4DMP 4 D-Ring Tool 5.1 lbs.

without the
upper tongue

——————————

B. Bashlin Back Support Tool Belt - This relative of Bashlin’s
88G tool belt is light on weight and long on comfort. It has a lower
profile than the standard 88G belt, and a quick release nylon waist
strap. The arc resistant material meets ASTM F887 standards, is
comfortable from the first day and looks sharp.

Ship. Wt. 5 lbs.

Cat. No. Q88GXMP

C.

——————————

C. Bashlin 88XMP - It has the same design
as the 88 Floridian, with a leather tongue
and forged buckle for durability. The cushion is arc
resistant, mesh backed, soft right out of the box. It
meets ASTM F887 requirements for line belts, and is
lighter than the 88.

Ship. Wt. 4.5 lbs.

Cat. No. 88XMP

D. ——————————
E.
Bashlin Pole Straps - Available in 2 materials. The 50 Series is
6 ply neoprene coated nylon. The 78 Series is 2 ply leather with a
nylon insert. Available with HL style snaps.

D. The 6 ply 1-3/4” neoprene coated nylon material uses a tongue
buckle adjustment.
Cat. No. Length Ship Wt.
51N-2HL 5’ 6” 3.75 lbs.
52N-2HL 6’ 3.75 lbs.
53N-2HL 6’ 6” 4 lbs.
54N-2HL 7’ 4 lbs.
CLIMBING
EQUIPMENT E. Pliable latigo leather straps feature a nylon insert. The stitching
is deeply embedded in the leather for longer wear.
Cat. No. Length Ship Wt.
78X-2HL 5’ 6” 4.25 lbs.
78A-2HL 6’ 4.25 lbs.
78B-2HL 6’ 6” 4.5 lbs.
78C-2HL 7’ 4 lbs.

www.americansafety.com 24 hour Fax (704) 481-0450

CLIMBING EQUIPMENT

M7Jelco Belts & Pole Strap

Full Floating Lineman Belt Tradition Series - This premium
belt is characteristic of the high quality products that Jelco has to
offer. The all-leather belt offers superior support, while providing a
lineman with the softest, most comfortable, and light-weight (under
4 lbs) belt that money can buy.

F. & G. Tradition 4” - It features a 4” back that fits and feels like F.
your favorite “broken-in” lineman’s belt that you have had for
years, right out of the box. The tradition belt’s full floating design G.
offers lineman the convenience of full range of motion, while H.
performing all tasks and operations. This item comes equipped
with leather tool loops, tape holder, chrome accessory clip, and Call Toll Free (800) 438-6013
large positioning D-rings for easy attachment. Complies with CSA
and ASTM belt and D-ring sizing standards.

F. Traditional 4” Black G. Traditional 4” Burgundy

Cat. #80861-80873 Cat. #80841-80853

“D” Belt Size Cat. No. “D” Belt Size Cat. No.

D18 36” 80861 D18 36” 80841

D19 37” 80862 D19 37” 80842

D20 38” 80863 D20 38” 80843

D21 40” 80864 D21 40” 80844

D22 41” 80865 D22 41” 80845

D23 42” 80866 D23 42” 80846

D24 44” 80867 D24 44” 80847

D25 45” 80868 D25 45” 80848

D26 46” 80869 D26 46” 80849

D27 48” 80870 D27 48” 80850

D28 49” 80871 D28 49” 80851

D29 50” 80872 D29 50” 80852

D30 51” 80873 D30 51” 80853

Tradition 8” - Made of the best leather, this lineman body belt will
provide the worker with the best back support money can buy!
Featuring an 8 inch back pad, this product will keep the worker’s
back in a better position. (Not Shown)

Traditional 8” Black

Cat. #8081-80893

“D” Belt Size Cat. No. “D” Belt Size Cat. No.

D18 36” 80881 D25 45” 80888

D19 37” 80882 D26 46” 80889

D20 38” 80883 D27 48” 80890

D21 40” 80884 D28 49” 80891

D22 41” 80885 D29 50” 80892

D23 42” 80886 D30 51” 80893

D24 44” 80887

——————————

H. Jelco Adjustable Safety Pole Strap - This wood pole climbing CLIMBING
strap is made of 6 ply neoprene rubberized 1-3/4” nylon which EQUIPMENT
has a built in red internal wear indicator. It has a tongue buckle
adjuster and the two double locking snap hooks have a 1” throat
opening. Meets CSA Z259.11-05 Class D and AST F-887-04.
Cat. No. Length
87611 5’ 8”
87622 6’
87633 6’ 6”
8877664545 7”
8’

[email protected]

CLIMBING EQUIPMENT

M8 Klein® Belts & Positioning Straps

A. Klein Lineman’s Body Belts
B. • Meets or exceeds applicable ASTM and CSA standards

C. and OSHA requirements.
• Forged circle D-rings have corrosion-resistant finish and

are proof-loaded to meet OSHA requirements
• Long-lasting 1-1/2” wide double-riveted leather tool loops
• Four suspender rings, tape thong, two-way knife snap,

and glove-bag ring

A. Klein® Standard Full-Floating Body Belt -
Additional Features:

• Klein-Kord® belt pad with two pocket tabs

• Rolled-edge leather belt cushion for comfort when leaning

back. 5” overall width

• Padded for maximum comfort and body fit

• 1-3/4” wide belt strap made of 6-ply Klein-Kord®

• Full-floating D-ring web strap with straight double-bar D-rings

• Ship. Wt. 5 lbs.

Cat. No. 5249N-Size

B. Klein® Deluxe Full-Floating Body Belt -
Additional Features:

• Latigo-leather belt pad is laced and stitched with two

pocket tabs

• Rolled-edge leather belt cushion for comfort when leaning

back. 5” overall width

• Padded for maximum comfort and

body fit

• 1-3/4” wide Klein-Kord belt strap cover with

top-grain harness leather for long-lasting use.

• Full-floating D-ring web strap with straight double-bar D-rings

• Ship. Wt. 4.9 lbs.

Cat. No. 5278N-Size

C. Klein® Lineman’s BackSaver Belts -
Additional Features:

• Leather construction is used throughout, including tool

loops, tape thong pocket tabs and cushioning material

• Body Belt strap - covered in leather - is made of Klein-Kord,

an exceptionally strong nylon fabric that is abraision-resistant,

non-conductive and flexible

• 4” lateral movement of D-ring independent of belt and pad

Cat. No. 5299N-Size

——————————

CLIMBING D. Klein Positioning Straps -
EQUIPMENT • Made of 6-ply, 1-3/4” wide Klein-Kord®, an exceptionally

strong, flexible fabric.
• Elongated 6-1/2” snap hook is easy to use with even the

thickest gloves.
• Internal lock mechanism.
• Snap hook has 5,000 lb. proof-loaded rating.
• Red wear indicator in center of strap alerts user when

strap needs to be replaced.
• Meets or exceeds applicable OSHA requirements and

ASTM and CSA standards.
• Depending on the application, choose a positioning strap

that allows you to work at arm’s length from the pole or

other positioning anchorage.

D. Cat. No. Min. Length Max. Length
KG5295-L 4’ 1” 5’ 8”
www.americansafety.com KG5295-6L 4’ 3” 6’
KG5295-6-6L 4’ 6” 6’ 6”
KG5295-7L 4’ 9” 7’
KG5295-8L 5’ 9” 8’

24 hour Fax (704) 481-0450

CLIMBING EQUIPMENT M9

Buckingham Lineman’s Belts

E. Model 1993F - A lightweight full float body belt with an extra E.
wide back support. The back pad is 8” of continuous firm cushion

lined with durable brushed leather. The 1 3/4” waist strap is 6-ply

neoprene impregnated nylon with 9 adjustable holes. (Ship Wt. 6 lbs.)

Cat. No. 1993F

——————————

F. Model 2000M - This is the finest belt available and is hand
crafted of the highest quality leather. It features a full float body
belt with a 5 1/2” foam cushioned pad reinforced with rawhide
lace. The floating dees provide 4” lateral movement to reduce the
wear on the pole strap. Available in Black(BL), Burgundy(BU) or
Brown(BR).(Ship Wt. 6 lbs.)

Cat. No. 2000M
——————————
F.

G. Lightweight Full Float Body Belt - The stacked 2018M 4 dee

body belt features:

• Dri-lex® lined

• Stacked dee rings

• 2 large full float double bar dee

• 2 small dee rings

• Removable MAN RATED gut strap (Must be used with a G.

Buckingham provided gut strap)

• Ship. Wt. 7.4 lbs.

Cat. No. 2018M

——————————

H. 4 Dee Body Belt - The 2100M body belts offer the same high H.
quality features of the 2000M with the added benefit of stacked
dee rings. The additional dee rings are ideal for use when a CLIMBING
secondary lanyard is used to climb over obstructions. Features EQUIPMENT
include hand crafting of the highest quality leather, full float body
belt with a 5 1/2” foam cushioned reinforced with rawhide lace,
bridge pieced and belt straps crafted of leather with a nylon center
to provide strength and longer life, and full floating primary dee
rings that provide 4” lateral movement to reduce the wear on the
pole strap.

FEATURES:
• 2 large full float double bar dee rings
• 2 small dee rings
• 9” back pad
• Waist strap only; no upper gut strap
• Available in Burgundy(BU), Black(BL) or Brown(BR).
• Ship. Wt. 7.8 lbs.

Cat. No. 2100M

[email protected] Call Toll Free (800) 438-6013

CLIMBING EQUIPMENT

M10 Secondary Safety & Pole Lariat

A. The Adjustable Secondary Safety is a 1/2” x 6’ Tytan double

braided polyester rope with red wear indicator, manufactured in

the USA. It is covered in a 12 mil shrink to resist wear and allows

for smoother operation. It also features an ULTRA-SAFE forged

aluminum double locking snap-hook that meets

the ANSI 3,600 lb. side load rating and

which weighs less without being harder

to open. The rope grab is a Puma

Grab model FP-7208-AL. Both

meet the ANSI Z359.1-R1999.





A.

12 mil. shrink 1/2” x 6’ double
around rope braided polyester
rope
Blue color distinguishes
Secondary Safety Snap from Cat. No. Description Ship. Wt.
7000-2080-6 6’ lanyard 2.3 lbs.
Primary Safety Snap 7000-2080-8
8’ lanyard 2.55 lbs.
The Pole Lariat
is designed so ——————————
that any of the
components can B. Bashlin’s 77BCS Pole Lariat is the first truly unique product
be replaced in for lineman’s Climbing and Fall Restriction. This device allows the
lineman to use and maintain hard earned climbing skills and to
the field. keep much of the maneuverability of free climbing, while providing
a light weight portable temporary anchor that easily moves with
B. the lineman up and down the pole.

Spacer Tab - Keeps handles FEATURES
separate with climbing.
• Lighweight-less than 3 lbs.
Climbing Hooks - The orange
nylon hooks allow you to grasp the • The lineman keeps and uses his own belt and pole strap.
pole as you climb and move the
Pole Lariat up and down with you. • Simple design-easy to use and understand.

Parking Tab - This Tab slides along • Only one point of adjustment
the rope, and is used to keep the Pole
Lariat in position on the pole. This is • Easy to use when wearing lineman’s gloves and protectors
done by sliding the tab against the
snap hook, tightening the rope around • The same unit can be used in both
the pole.
distribution and transmission poles - no
Pole Rope - 7.5 feet of durable
coated line has a tensile strength need to stock two sizes.
in excess of 6000 lbs., and a red
wear indicator for inspection. Cat. No. 77BCS

CLIMBING www.americansafety.com Friction Adjustor/Carabiner
EQUIPMENT Connector - A friction adjustor easily
changes the working length of the Pole
Rope. A carabiner connects the Pole Lariat
to your belt with the nylon loops. This is the
only length adjustor on the device.

24 hour Fax (704) 481-0450

CLIMBING EQUIPMENT

M11Jelco The Pole Choker & Retractable Lanyard

Jelco The Pole Choker

• The Pole Choker meets all the requirements for a Type A

Positioning Strap in ASTM F887-04 and Class D

Lineman’s Pole Strap in CSA Z259.11-05.

• Made with a drop-forged tongue buckle on a six-ply

neoprene impregnated webbing.

• The yellow choker strap is adjustable, helping C.
the worker to extend his reach in a safe

manner. When the choker strap is disconnected,

it functions the same as a standard pole strap.

• The Pole Choker can be fitted with a Jelco

belt-mounted retractable device for climbing past

an obstacle.

• The Pole Choker can also be used to secure a ladder to a

neutral cable or to secure the worker to the ladder.

• The Pole Choker is the widest used fall restricting device in

North America. It is the most user-friendly and easy device

to learn how to operate.

C. The Pole Choker 3 with 2 Double Locking Snap Hooks D.

Cat. No. Length Ø Pole

03714 4.5’ 6” - 10”

03715 5.25’ 10” - 16”

03716 6.2’ 10” - 20”

03717 6.8’ 12” - 30”

D. The Pole Choker 5 with 1 Double-Eye Snap Hook

Cat. No. Length Ø Pole
6” - 10”
03724 4.5’ 10” - 16”
10” - 20”
03725 5.25’ 12” - 30”

03726 6.2’

03727 6.8’

—————————— E.

E. Jelco Retractable Lanyard mounted on a swivel plate and
ultra light aluminum auto-locking carabiner on the end. This
device is one of our lightest retractables. This retractable lanyard
configuration is designed for positioning. This is a Type 1/Class C.

Cat. No. 21221

Notes

CLIMBING
EQUIPMENT

[email protected] Call Toll Free (800) 438-6013

CLIMBING EQUIPMENT

M12 PoleMaster™ & BuckSqueeze

A. PoleMaster™

Outer strap • Connecting hardware conforms to
constructed ASTM F887, ANSI Z359.12 and
of Klein-Kord® CSA Z259.12, Class I requirements.
material
• Abrasion resistant inner strap material
for durability - includes a red
wear indicator.

• Cam bracket system for easy adjustments.

Adjusts from 8”

A.to 16” diameter • Self-closing and self-locking carabiner
wood poles
Carabiner for easy disconnect
sub-assembly from around
with roller the pole.
Cam Bracket
and Adjusting • Vinyl Storage Bag includes a zippered
Paddle pocket for instructions.

Klein-Gard® Inner strap • The Wood Pole Fall Restriction Device
elongated construc ted o f has been designed to meet CSA Z259.14-01
snap-hooks abrasion re sista nt standard as a Type A Fall Restriction Device. Do
NOT use on icy poles. Also meets or exceeds ANSI
webbi ng Z359.3, ASTM F887; OSHA 1910, 1926.



• Made in USA
• Ship Wt. 6.4 lbs.

Cat. No. FPD-5295

——————————

B. BuckSqueeze - In production since 2000, the BuckSqueeze
is a Wood Pole Fall Restriction Device that provides Wood Pole
Fall Protection during ascent and descent and, with the use of a
secondary lanyard like the BuckAdjuster, protects the user while

B. climbing over obstacles. Designed to grip the pole if the user
starts to fall. For distribution poles with a circumference from 16”
(5” diameter) to 50” (16” diameter).

• Once You’re on the Pole, You’re Continually in Wood Pole Fall Protection
•One Disconnect to Climb Over An Obstruction

• Most Widely Used Wood Pole Fall Restriction Device In The USA
• Does Not Work Itself Out Of Adjustment
• Outstanding Factory Support - Follow Up Training After The Sale
Friction Buckle & Cam Buckle Adjustments at User’s Sides Makes It
Easy to Adjust for the Circumference of the Pole
• NO TONGUE BUCKLE TO ADJUST AT THE BACK OF
THE POLE!
• One Model, With Accessories, Can Be Used During All Seasons:
Wet Or Iced Poles With Or Without Conduit.

FEATURES:

• 3 slot dee to increase the rigidity of the strap while hitchhiking.

All three slots are usable, but the center provides maximum rigidity.

CLIMBING • Carabiner with teeth that will increase stopping power.
EQUIPMENT
• No link between the friction buckle and snap adds to ease the

adjustment to and from the pole, less metal and easier adjustment.

Modifying the friction buckle by making the opening slightly larger

eases strap adjustment.

• A threaded removable cleat into the housing of the CAM buckle.

This improves the arresting ability for the user in the event of a fall.

• Paddle handle has a channel allowing the webbing to glide freely

keeping the strap evenly spaced while ascending and descending.

Cat. No. 483D

www.americansafety.com 24 hour Fax (704) 481-0450

CLIMBING EQUIPMENT M13

Miller Stop Fall & Pole Anchor System

The Miller Stop Fall System features a rugged pole strap C.
constructed of nylon safety strapping with a nonslip rubber belting D.
interior and a nylon webbing security strap with rubber belting and
unique gaffs that “Bite” into wood poles, whether dry, wet, conduit
or ice covered. The StopFall System easily adjusts to fit poles with
a 25” to 50” circumference.

• Engineered for Wood Pole Application

• User-Friendly Design

• Durable Construction

• Superior Performance

Pole Strap Features:
• Rugged construction for long service life
• Rubber belting prevents slippage
• Two-piece spring assembly eliminates the possibility of a

continuous electrical path
• Easy-to-use self-locking snap hooks and

length-adjustment buckles

Security Strap Features:
• Corrosion-resistant, stainless steel, spring-loaded gaffs

provide instant grip on wood poles
• Nylon rollers allow the gaffs to move freely while

minimizing abrasion on the strap
• Rubber belting prevents slippage
• Disconnect/length adjuster offers a ”parking” feature for

when the security strap is not in use.

Cat. No. Description Ship Wt.
C. 7600A/YL w/friction buckle adjustment 6.1 lbs.
D. 7600B/YL
w/tongue buckle adjustment 6.4 lbs.

——————————

E. The Saflok™ Pole Anchor System provides utility
pole climbers with 100% fall protection. This unique
system allows workers to free climb poles and work
around obstructions such as multiple conductors,
equipment, vines and other natural obstructions. It allows
workers to quickly and safely climb the pole prior to
connecting their work positioning system. This system
can also make rescuing a fallen worker fast and easy.

Extremely Easy Installation and Removal E.
• Allows the worker to free climb the pole.

• Allows the worker to climb easily around obstructions

such as poles with a heavy conductor count, equipment

loaded,or vines and other natural obstructions

• Allows the worker to free climb into position before CLIMBING
EQUIPMENT
connecting into their work positioning belt.

• The worker can climb the pole faster.

• Compatible with most hot stick poles already available

on many utility trucks.

• Ensures 100% tie-off is possible

• Ship. Wt. 12 lbs.

Cat. No. 2104800

[email protected] Call Toll Free (800) 438-6013

CLIMBING EQUIPMENT

M14 Tool Holders & Pouches

A. B. Bashlin manufactures only premium holsters for tool belts. They
C. D. feature double backs which are reinforced for extra wear. Left
handed holsters are available at no extra cost. (Add an “-LH” to
G. the part number when ordering) Tools are not included.
E.
Cat. No. Color/Description Ship Wt.
A. 111HS Tan - For pliers, rule, screwdriver, 1 lbs.

knife or wrench 1.25 lbs.

Tan - For pliers, rule, screwdriver,
B. 111HLS CHANNLLOCK, knife or wrench.


C. 111HLDS Tan - For pliers, rule, screwdriver, 1.5 lbs.
CHANNLLOCK, ratchet driver,
knife, or wrench.


D. 111HLSX Black - For pliers, rule, screwdriver, 1.25 lbs.
CHANNLLOCK, knife or wrench.

E. 111HLDSX Black - For pliers, rule, screwdriver, 1.5 lbs.
CHANNLLOCK, ratchet driver,
knife, or wrench.


F. 111HE For pliers, screwdrivers, rule 1.25 lbs.
and knife

G. 111HLE For pliers, screwdrivers, 1.5 lbs.
CHANNLLOCK, rule and knife

H. 111BWH For bell wrenches 6 oz.
I. 111LWH For the Lowell Wrench 6 oz.

——————————

I. J. These swivel bar tape slings will fit any size tape roll. Tools are
J. not included.

F. Cat. No. Description Ship Wt.
H. 31L Loop type 1 lbs.

——————————

Klein 4 and 5 Pocket Pouches

CLIMBING L. • Leather construction with double leather back for durability
EQUIPMENT K. • Rivet hole for belt construction
• Riveted to assure long life
www.americansafety.com • Includes knife snap, pockets for pliers, most screwdrivers,

6’ folding rule and open ended wrenches
• Made in USA

Cat. No. Description Approx. Size Ship Wt.
K. 5118P5 5 Pocket 10” x 11” 1.13 lbs.
L. 5118P4
4 Pocket 8” x 11” .91 lbs.

24 hour Fax (704) 481-0450

CLIMBING EQUIPMENT

M15Nut & Bolt Bags, Glove Bags & Tool Bucket

Quick Release Snap Nut and Bolt Bag - Standard nut and bolt
bag made of canvas, with quick release snap.

Cat. No. Description Dimensions
M. 10-100-NB Canvas Bag 9” x 4” x 9”
N. 10-105 Yellow Vinyl Bag 9” x 4” x 9”

—————————— M.

O. Green Snap Assembly Nut and Bolt Bag - Green canvas N.
O.
with one inside pocket, reinforced bottom and top hem, drain hole

and a quick release snap assembly on webbing straps.

Dimensions: 8 1/2” x 10” x 3”

Ship. Wt. .5 lbs.

Cat. No. 10-160-NB

——————————

P. 25A - Made of #8 cotton duck with a reinforced bottom. Belt

attachment is by two straps joined by snaps and “D”s.

Dimensions: 8 1/2” x 9” x 4”

Ship. Wt. .7 lbs. P.

Cat. No. 25A

——————————

Q. 26G - Soft leather bag with snap closure and

leather thongs.

Dimensions: 8 1/2” x 9”

Ship. Wt. .5 lbs.

Cat. No. 26G Q.

—————————— R. V.
T. U.
Standard Glove Bags are equipped with a sturdy
quick release snap attached with a three piece leather
set that is sewn, double steel riveted and capped to the back
of the bags. Two industrial weight nickle-plated snaps secure
closure.

Cat. No. Description Ship Wt. S.
R. 1212 For 11” low voltage gloves. 6 oz.
S. 1214 For 14” rubber gloves.
T. 1216 For 16” rubber gloves. 10 oz.
U. 1218 For 18” rubber gloves. 11 oz.
12 oz.

——————————

V. Miniature Tool Bucket - For Rodeo speed climb events or CLIMBING
EQUIPMENT
to keep miscellaneous items together on your desk or in your

vehicle.

Dimensions: 6” x 5”

Ship. Wt. .4 lbs.

Cat No. 650

[email protected] Call Toll Free (800) 438-6013

CLIMBING EQUIPMENT

M16 Bashlin Climbers, Straps and Gaff Guards

A. A. BD14 Series - The BD14 is Bashlin’s aluminum alloy offset
C. climber with a replaceable, forged steel gaff. This lightweight
E. climber reduces fatigue and adds climbing comfort. Comparable
G. steel climbers weigh 30% more. The Aluminium alloy construction
J. sacrifices some wearing qualities.

Cat. No. Description Ship Wt.

BD-14-1N Bottom straps attached 4.25 lbs.

BD-14-2N Bottom & top straps attached 4.75 lbs.

BD-14-3N Bottom & top straps attached, #110D pads 5.25 lbs.

BD-14-4N Bottom & top straps attached, #130D pads 5.5 lbs.

BD-14-5N Bottom & top straps attached, #140D pads 5.75 lbs.

B. ——————————
D. B. Bashlin Aluminum Climbers with CCA Gaffs - Same as

F. above except with polished gaffs for CCA and other harder poles.
I.
Cat. No. Description Ship Wt.
H.
BD-14P-1N Bottom straps attached 4.25 lbs.

BD-14P-2N Bottom & top straps attached 4.75 lbs.

BD-14P-3N Bottom & top straps attached, #110D pads 5.25 lbs.

BD-14P-4N Bottom & top straps attached, #130D pads 5.5 lbs.

BD-14P-5N Bottom & top straps attached, #140D pads 5.75 lbs.

——————————
C. BD16B Series - This rugged, steel alloy adjustable climber

features a replaceable gaff, offset design, roomy ankle area and a

triangular strap ring.

Cat. No. Description Ship Wt.

BD-16B-1N Bottom straps attached 5.5 lbs.

BD-16B-2N Bottom & top straps attached 6 lbs.

BD-16B-3N Bottom & top straps attached, #110D pads 6.5 lbs.

BD-16B-4N Bottom & top straps attached, #130D pads 6.75 lbs.

BD-16B-5N Bottom & top straps attached, #140D pads 7 lbs.

——————————
D. BD16BC Series - This steel climber has a replaceable gaff,

twisted shank and offset design. The twisted shank lies flatter on

the leg for more comfort.

Cat. No. Description Ship Wt.

BD-16BC-1N Bottom straps attached 5.5 lbs.

BD-16BC-2N Bottom & top straps attached 6 lbs.

BD-16BC-3N Bottom & top straps attached, #110D pads 6.5 lbs.

BD-16BC-4N Bottom & top straps attached, #130D pads 6.75 lbs.

BD-16BC-5N Bottom & top straps attached, #140D pads 7 lbs.

——————————
E. - H. Bashlin Nylon Climber Straps are durable, pliable and

comfortable. They are double riveted and feature a protected

buckle shield.

Cat. No. Description Ship Wt.

E. 85N Top straps - 1-1/16” x 24” .6 lb.

F. 86N One piece lower straps - .6 lb.

1-1/16” x 28”

G. 89N 2 pc. lower straps w/ split ring - .7 lb.

1-1/16” x 28”

H. 87N 2 pc. lower straps - 1-1/16” x 28” .7 lb.

(Original style, to be used on the

triangle ring of Bashlin climbers.

CLIMBING Must be assembled.)
EQUIPMENT
——————————
I. Leather Gaff Guards with Velcro straps for 1-1/2” Gaffs.

Cat. No. 4075

——————————
J. Snap-On Gaff Guards for pole and tree climbers. Coil-spring,

plastic coated guard quickly snaps into pole climbers. Sold in pairs

only.

Cat. No. 1972G

www.americansafety.com 24 hour Fax (704) 481-0450

K. 1972AR Series, 1-1/2” Gaffs with Pads & Straps - Furnished CLIMBING EQUIPMENT
with Klein No. 8210 pads and nylon calf and ankle straps. Pad
size is 8” x 8”. The climbers below are available in 2 size ranges M17Klein Pole Climbers
and are adjustable in 1/2” increments. To determine size needed,
measure from instep to 1” below knee. Stirrup width is 4-7/16”. K.
Comes with No. 8210 pads, No. 5301-18 nylon calf straps and L.
5301-20 nylon ankle straps.
N.
Cat. No. Description Ship Wt. M.
CN1972AR Adjustable to 15” to 19” 6 lbs.
O.
CN1972ARL Adjustable to 17” to 21” 6.25 lbs. P.

—————————— Q.
L. 1972AR Series, 1-1/2” Gaffs without Pads & Straps - Pole R.
climbers only, identical to 1972AR Series, but without pads and
Call Toll Free (800) 438-6013
straps. Components consist of steel sleeve, leg iron, split ring

and gaff. To determine size needed, measure from instep to 1”

below knee.

Cat. No. Description Ship Wt.
1972AR 15” to 19” 4.5 lbs.

1972ARL 17” to 21” 4.85 lbs.

——————————
M. Replacement Gaffs & Accessories - Pair of gaffs supplied
with flat TORX cap screws and wrench. No. 72 gaffs, No. 86

gaffs, and No. 07 gaffs are interchangeable and fit a Klein

replaceable-gaff climbers.

Cat. No. Description Ship Wt.
72 Pair of 1-1/2” gaffs.* .5 lb.

86-GAFF Pair of 1-9/16” gaffs.* .6 lb.

07 Pair of 2-3/4” gaffs* .75 lb.

244 Long Gaff Screw
247 Short Gaff Screw
34910 Screw w/Lock Washer Set

* For Pole Climbers Only

——————————
N. Angle Climber Pads - Right and left L-shaped pads of high
grade latigo leather cushioned with rubberized horsehair. One

pair: 8” x 8”. (Ship Wt. .7 lb.)

Cat. No. 8210-PADS

——————————
O. Nylon Climber Straps - These neoprene-impregnated nylon
straps may be used with any Klein pole or tree climbers.

Cat. No. Description Ship Wt.
5301-18 One pair; 1” x 22” .35 lb.

5301-19 One pair; 1” x 26” .4 lb.

5301-21 One pair; 1-1/4” x 22” .5 lb.

5301-22 One pair; 1-1/4” x 26” .46 lb.

——————————
P. Nylon Ankle Straps - These neoprene-impregnated nylon
straps may be used with any pole or tree climbers.

Cat. No. Description Ship Wt.
5301-20 One pair; 1” x 24” .5 lb.

5301-23 One pair; 1-1/4” x 24” .7 lb.

——————————
Q. Klein Gaff Gauge for Pole Tree Climbers - This gaff gauge
is offered for the purpose of checking the proper WIDTH,

THICKNESS and POINT PROFILE of climber gaffs. The main

purpose of the gauge is to serve as a guide for sharpening gaffs. CLIMBING
EQUIPMENT
The Klein gauge is conveniently packaged in a plastic case with

instructions. (Ship Wt. .1 lb.)

Cat. No. KG-1

——————————
R. Klein Gaff Sharpening Kit - A complete gaff-sharpening
kit in a handy roll-up white canvas case with tie. Consists of all

necessary tools and instructions: 8” fine-tooth file, 3” honing

stone, Klein KG-1 gaff gauge, and fully-illustrated gaff sharpening

instructions folder.(Ship Wt. .35 lb.)

Cat. No. KG-2

[email protected]

CLIMBING EQUIPMENT

M18 Bashlin Gaff Inspection & Maintenance

Inspection & Maintenance

To get the best climbing performance from your Bashlin climbers,
the gaffs must be sharp, with the correct shape and dimensions.
Improperly maintained gaffs can cause cutouts, accidents or injury.
Here are the basic techniques of correct gaff maintenance:

1. 2.

A. Sharpening Bashlin Gaffs
E.
B. Place the climbers in a vise as pictured. Wood blocks are used
C. to protect the shank. The bottom of the gaff is up and exposed,
making it easy to file and make the proper cuts. The goal of
D. correct sharpening is to hone the 2 edges on the underside of the
F. gaff as indicated (1), all the while maintaining the “chisel point” on
the tip of the gaff. (2)
G.
A. Hold the 6” mill bastard file with both hands. Lay the file on the heel of
www.americansafety.com the gaff and draw it forward in a flat level cut. Follow the shape of the
gaff over the tip, maintaining the chisel point.

B. Finish by making similar strokes with a sharpening stone.

Using the Bashlin No. 5 Gaff Gauge to determine the shape
and dimension of a Gaff.

Bashlin’s Gaff Gauge is the only tool that can be used to
accurately measure Bashlin Gaffs. By using it, the user can
measure the length, width and thickness of all 12,14 and 16 series
pole gaffs. This gauge is only to be used on the 1-5/8” number 14
pole gaff.

It will not correctly measure the 2-1/2” tree gaffs.

C. Length - Place the gauge under the gaff as indicated by (C). It will
measure correctly from either side of the gauge. The tip should
rest beyond the last line indicating a length in excess of 1-1/4”.

D. Thickness - Using the side of the gauge marked with a “T”, insert the
gaff in the larger, then the small area of the opening. The gaff
can be inserted with either the underside or the ridge resting on
the gauge, but it must lie flat. If the gaff is correct thickness,
the tip will rest either between the two lines or between the edge
and the line, depending on which area of the “T” is being used.

E. Width - The width is measured by inserting the gaff into the larger, then
the smaller square holes on the side marked with a “W”. Once
again the gaff must lie flat on the gauge. If it is correct width,
the tip will fall between either the edge of the gauge and the first
line, or between the two center lines, depending on the hole the
gaff is inserted into.

F. Tip Contour - The tip of the gaff is inserted into the cut-out section of
the gauge, as indicated. If it is correct, the contour will follow
the outline of the gauge. This is the correct “chisel point” that will
allow optimum performance of the gaff.

CLIMBING G. Gaff Point - There is a tiny hole in the gauge. Place the hole over the tip
EQUIPMENT of the gaff. If the point can be felt through the hole, the gaff has
a needle point. A needle point may not perform properly and is
prone to breakage. The gaff should by removed from service.

Reshaping a Gaff

This must be done only as necessary and with great care. The
goal is to file away just enough steel in the gaff to allow it to
fit properly in the gauge. This is done by making even, round
cuts on the sides, and flat cuts underneath. (The same stroke
as sharpening.) This maintains the correct gaff shape. Never
file the ridge on the back of the gaff. When the gaff is properly
dimensioned, it can be returned to service.

24 hour Fax (704) 481-0450

CLIMBING EQUIPMENT

M19Bashlin Climber Accessories

Bashlin Climber Replacement Parts -

Cat. No. Cat. No. Description Ship. Wt. N.
O.
BD14 BD12* / BD16B H.
I.
H. 14ATS 16ATS Adj. Top Slide 18”-21” .85 lb.
P.
I. 14TS 16TS Adj. Top Slide 15”-18” .6 lb.
S.
J. 4T Top Slide Screws .05 lb.

K. 14 Gaffs 1-5/8” .5 lb

L. 14T Tree Gaffs 2-1/2” .6 lb J. K.
L.
M. 14P Polished Gaffs 1-5/8” .5 lb.

N. 3 Split Ring .15 lb M.

O. 4G Gaff Screws .05 lb

* BD12 Series features non-replaceable gaffs

NOTE: Replacement Gaffs include screws and only work on
Bashlin Climbers

——————————

P. Gaff Guards - Bashlin’s #2 gaff guards are made of leather and Q.
have a Velcro attachment. They protect your gaff and you.

(Ship Wt. .2 lb.)

Cat. No. 2

——————————

Q. Gaff Gauge - Bashlin’s Gaff Gauge measures the correct
length, width, thickness and shape of the gaff. (Ship Wt. .2 lb.)

Cat. No. 5 R.

——————————

R. Gaff Replacement Jig - This jig holds the climbers securely
without damage to the shank section and make gaff replacement
on Bashlin climbers much easier. (Ship Wt. 1 lb.)

Cat. No. 17

——————————

S. Bashlin’s Gaff Shaping Kit combines the necessary tools to
maintain gaffs in a neat, compact case. It includes a file with a
handle, gaff gauge, finishing stone and instructions. The gauge
will work only with Bashlin gaffs. (Ship Wt. .55 lb.)

Cat. No. 27 CLIMBING
EQUIPMENT
Cat. No. Description Ship Wt.
27-1 Case .25 lb.
27-2 Sharpening Stone .15 lb.
27-3 Mill File, 6” .2 lb.
27-5 Wood File Handle .08 lb.
5 Gaff Gauge .2 lb.

[email protected] Call Toll Free (800) 438-6013

CLIMBING EQUIPMENT A. 105 Series - This is the original “spur-stay” climber pad. It is
designed to reduce kick-back and twisting of the shank. The insert
M20 Climber Pads holds the climber for comfort and better gaff penetration. It is an
excellent choice for the lineman who climbs occasionally. Available
A. with a straight or angled metal section.
B.
C. Straight Angled Ship Wt.
Cat. No. Cat. No. Use On
D. 105A 105AC BD12 & BD16 1.5 lb.
E. 105B 105BC BD14 1.5 lb.
105K 105KC Klein Climbers 1.5 lb.
F.
G. * Replacement Irons: Add an “R” to the above part number. Sold in pairs.

www.americansafety.com ——————————

B. 140DS Pad - The wing pad holds the shank more securely than
other leather pads. The climber shank fits inside the pad, reducing
movement and adding comfort.

Cat. No. Description Ship Wt.
140D Not Padded .8 lb.
140DS Padded
—————————— 1.25 lb.

C. 130DS Pad - The 130D is an L-shaped design with light
padding for added comfort (Ship. Wt. .7 lbs.)

Cat. No. 130D
——————————

D. 150TS Pad - This T-shaped pad protects the shin and calf. The
leather lugs are securely riveted for long wear.

Cat. No. Description Ship Wt.
150T Not Padded .8 lb.
150TS Padded .9 lb.
——————————

E. 110D Pad - If you need a basic 2-ply pad, the 110D is what you
want to buy. This is our lightest pad and will protect the leg and
shin.

Cat. No. Description Ship Wt.
110D Not Padded .6 lb.
110DS Padded .7 lb.
——————————

F. 145AC, 145BC & 145KC Climber Pad - These pads are a
combination of the standard “C” pad (#105AC, #105BC & 105K)
and the Sierra Moreno Pads (#145). This new style of pad
provides the rigid stability of the metal insert found in the #105
series, along with the comfort the extra deep felt padding provides.
Each pair of pads includes pair of nylon climber straps that use the
buckle closure system for security.

Cat. No. Use With
145AC Bashlin BD12 & BD16
145BC Bashlin BD14
145KC Klein Climbers
——————————

CLIMBING G. Klein Velcro® Climber Pads -
EQUIPMENT • 4” of Velcro® provides the maximum amount of adjustability.
• Continuous wrap with metal clinch loop for quick attachment and

ease of use.
• Extra wide cuff fastens around the calf to provide more support.
• Padded for additional comfort.
• Klein Velcro® Climber Pads meet the requirements of

ASTM F887.
Ship. Wt. 1.75 lbs.

Cat. No. 8220

24 hour Fax (704) 481-0450

CLIMBING EQUIPMENT M21

Climber Pads & Guards

Bashlin’s V climber pads eliminate straps and buckles for
easy donning and have a comfortable wrap around padding for
comfort. They fit most standard climbers, and are available in
the standard “T” design (150V) or with a metal insert for positive
climber control. (145V)
Cat. No. Description Ship Wt.
H. 150V Hook-N-Loop Climber Pad 4 lb.
I. 150ACV Hook-N-Loop for Steel Climbers 5 lb. H.
J. 150BCV Hook-N-Loop Aluminum Climbers 5 lb. I.

—————————— L.
N.
K. Model 3500 - The original Velcro® cushion wrap pad. Comfort,
ease of attachment and durability has made this our most
popular selling climbing pad. The 4” width Velcro® strap which
fastens around your calf provides more support and reduces the
discomfort associated with a 1” or 1-1/4” strap. The leather pad
has a rolled edge to reduce chafing. Also available in 3” model.
Fits all manufacturers of climbers.
Cat. No. Use On Ship. Wt.
3500 All Manufacturers of climbers except Brooks 1.75 lbs.
3500S Brooks Climbers 1.7 lbs. J.
K.
——————————
M.
L. Model 3500C - The 4” Velcro® cinch pad is an improved O.
version of our most popular selling pad. A cinch loop has been
added to allow the user a better means of tightening the strap
around the calf muscle. The user weaves the strap through the
metal clinch loop, pulls tight and fastens using Velcro®. Also
available in 3” model.
Cat. No. Use On Ship. Wt.
3500C All Manufacturers of climbers except Brooks 1.95 lbs.
3500CS Brooks Climbers 1.9 lbs.

——————————

M. Model 3502 - The cushion wrap pad with an angled steel insert
to keep the climber shank from chafing the leg. The rounded
edges, the 4” width and the Velcro® closure all contribute to the
users comfort. Fits Buckingham and Bashlin Climbers. Available to
fit Klein climbers. Also available with cinch loop.
Cat. No. Description Ship. Wt.
3502 Wrap Pad, Fits Buckingham and 3.15
Bashlin Climbers
3502KL Wrap Pad, Fits Klein Climbers N/A
3502C Cinch Pad, Fits Buckingham and 3.55 lbs.
Bashlin Climbers
3502CKL Cinch Pad, Fits Klein Climbers 3.55 lbs.

——————————

N. Bashlin Heel Guards - Wearing a pair of climbers, whether
on a pole, or walking from the truck to the structure, exposes the
lineman’s ankle and Achilles tendon to injury from the razor sharp
tips of the gaff. Gaff guards offer some protection, but can’t help
on a pole. The Harko Heel Guard protects this vulnerable area,
without restricting movement. They are light, durable, and easily
attached to any standard climber.
Cat. No. Description Ship Wt.
BHG-S Small Heel Guard .5 lb.
BHG-M Medium Heel Guard .5 lb.
CLIMBING
—————————— EQUIPMENT

O. Climber Guards are manufactured by the dipping process
using the same formulation of rubber as lineman’s insulating
gloves and sleeves. Climber Guards are furnished un-slit to
accommodate any length, regular or adjustable climbers. Sold in
pairs only. (Ship Wt. .5 lb.)
Cat. No. 21187

[email protected] Call Toll Free (800) 438-6013

CLIMBING EQUIPMENT

M22 Handlines, Hooks, Blocks & Tackles

Handlines with Snap hooks are not occupational protective

devices. Not for human support. Made of 5/16” three-strand

polypropylene rope spliced to eye of snap hook. Orange strands

for high visibility. Both lines are 75’ of 5/16” rope with maximum

safe load of 250 lbs.

Cat. No. Description Ship Wt.

A. 1803-60 With No. 443A snap 2.45 lbs.

A. B. 1804-60 With No. 470 swivel snap 2.2 lbs.

——————————

B. The Block & Tackles are not occupational protective devices.
C. Not for human support. These light, galvanized-steel shell blocks
are fitted with snubbing hooks to hold the load in any position.
D. Sheaves are strong yet lightweight aluminum alloy with all-bronze
bushings. Available with standard snap hooks or guarded snap
www.americansafety.com hooks(with snap hook nose lengthened to extend over the latch
or keeper). Choice of drop-forged hook No. 258 or swivel hook
No. 259. Hooks fit under insulator and engage pin in cross arm.
All Klein block and tackle use high-quality, 3/8” diameter rope.
Catalogue numbers follow by S/R have rope spliced to block.
Maximum safe load for all block and tackle is 750 lbs.

C. Blocks with standard snap hooks:

Cat. No. Description Ship Wt.

1802-30 Furnished with 25’ of 3/8” rope. Has 2.8 lbs.

No. 267 block with snap hook and

detachable drop-forged anchor hook

(No. 258) on one end, and block

No. 268 with eye and rope

tie-off on other end

1802-30 S/R Same as above but with rope 2.8 lbs.

spliced to No. H268 block.

1802-30S Same as 1802-30, except 2.85 lbs.

supplied with a detachable swivel

anchor hook (No. 259)

instead of hook No. 258

1802-30S S/R Same as above but with rope 2.85 lbs.

spliced to No. H268 block.

D. Blocks with guarded snap hooks:

Cat. No. Description Ship Wt.

H1802-30 Furnished with 25’ of 3/8” rope. 2.9 lbs.

Has No. 267 block with guarded

snap hook and detachable

drop-forged anchor hook (No. 258)

on one end, and block No. 268 with

guarded snap hook, eye and rope

CLIMBING tie-off on other end
EQUIPMENT
H1802-30 S/R Same as above but with rope 2.9 lbs.

spliced to No. H268 block.

H1802-30S Same as 1802-30, except supplied 3 lbs.

with a detachable swivel anchor hook

(No. 259) instead of hook No. 258

H1802-30S S/R Same as above but with rope 3 lbs.

spliced to No. H268 block.

24 hour Fax (704) 481-0450

CLIMBING EQUIPMENT

M23Handlines, Hooks, Blocks & Tackles

Klein Blocks without Ropes and Hooks.

Cat. No. Description Ship Wt. E.
E. 267
Plain block of light galvanized steel .76 lb.

and aluminum alloy sheaves have

F. 268 bronze bushings.

Same as 267 with eye to .91 lb.
G. H267
splice line to block and rope tie-off hook.

H. H268 Same as 267 but nose extends .8 lb. F.

over keeper

Same as 268 but nose extends 1 lb.

over keeper

—————————— G.

Hooks for Block and Tackle are not occupational protective
hooks and are not for human support.

I. Standard on Klein block and tackle No. 1802-30 and H1802- H.
30, this drop-forged hook is designed to slip under insulator and I.

engage pin of crossarm. Maximum safe load 750 lbs.

Cat. No. Overall Length Eye I.D. Throat Opening Ship Wt.

258 5-1/2” 5/8” 3-1/4” .42 lb.

J. The swivel clevis on this drop forged hook will engage with
snap on Klein block & tackle No. 1802-30 and H1802-30. Swivel

prevents twisting and kinking of rope. Maximum safe load 750 lbs.

Cat. No. Overall Length Eye I.D. Throat Opening Ship Wt.

259 6-1/2” 1” 3-1/4” .4 lb.

K. Snaps on with one hand. This drop-forged hook may be used
on any conventional steel block 4” or smaller. Maximum safe load

8000 lbs.

Cat. No. Overall Length Eye I.D. Throat Opening Ship Wt. J.

455 4-1/4” 15/16” 1” .84 lb.

——————————

L. Snap Hook is not an occupational protective hook. Not for K.
human support. General purpose drop-forged snap hook with eye

at 90° to opening. Max load 1500 lbs.

Cat. No. Overall Length Eye I.D. Throat Opening Ship Wt.
1” 1/2” .52 lb.
443A 5-1/5”

—————————— L.

M. Swivel Hook with plunger latch. This is not an occupational M. CLIMBING
protective hook. Not for human support. Drop-forged steel with EQUIPMENT
swivel clevis and quick-acting plunger style latch. Designed to take Call Toll Free (800) 438-6013
1/2” or lighter headlines. Swivel action prevents accidental fouling
into secondary wires. Max safe load 750 lbs.

Cat. No. Overall Length Eye I.D. Throat Opening Ship Wt.
1” 5/8” .3 lb.
470 5”

[email protected]

CLIMBING EQUIPMENT

M24 Handlines, Hooks, Blocks & Tackles

Bashlin Handlines include 75’ of rope, a premium block, 500 lb.

test hook and 750 lb. test snap. Available in 1/2” Yale PolyPlus or

1/2” polyester twist.

Cat. No. Description Ship Wt.

A. 940 Complete assembly with 1/2” braided rope 8.75 lbs.

940T Complete assembly with 1/2” twisted rope 8.75 lbs.

940R 1/2” PolyPlus braided rope with 470 snap only 5 lbs.

B. 940GP Same as 940 above except with double hook 8.75 lbs.

——————————

A. C. Handline Hooks can be attached any place along hand line by
C.
D. the 2 large holes. The long point accommodates most items to be
F.
raised and lowered at the pole. Working load is 500 lbs. with load
H.
B. seated at bottom of hook.
Cat. No. M1849

——————————

Bashlin Handline Hooks have a working load of 500 lbs.

Bashlin’s Double Handline hooks are tested for safety.

Cat. No. Description Ship Wt.

E. D. 35 Single Handline Hook 10 oz.
E. 35GP Double Handline Hook 11 oz.

——————————

Handline Utility Blocks -

• Lightweight fiberglass body

• WLL - 1,000 lbs.*

• Design factor - 3 to 1

• 3” sheave - will accommodate up to 5/8” rope

• Block sides and sheave made from insulating (dielectric)

material tested to ASTM D149-97a

• Available with latched swivel hook or meat hook style.

Cat. No. Description Ship Wt.
10 oz.
F. 7380300 3” Block with Safety Hook
11 oz.
G. 7380302 3” Block with Meat Hook

G. ——————————
I.
H. Hastings Insulated Blocks are designed for all types of

hoisting related jobs. They are especially ideal for hot line use.

Bodies are made from high impact, dielectric thermoplastic

material. All hooks have full swivel capabilities. Sheaves are made

with fiberglass reinforced nylon material. Shafts are stainless

steel. Swivel Hooks are plated and include hot eye for application

with hot sticks.

Cat. No. Description Upper/Lower Sheave Ship Wt.

11361 Blocks only - No Rope 2/2 6.5 lbs.

11362 Blocks w/120’ 1/2” Polydacron 2/2 16 lbs.

11367 Blocks only - No Rope 3/3 6.75 lbs.

11368 Blocks w/150’ 1/2” Polydacron 3/3 20 lbs.

11052 Single Block Only 2/2 3.25 lbs.

CLIMBING 11051 Single Block Only 2/-- 3.5 lbs.
EQUIPMENT
——————————

I. Non-conductive Nylon Hand-Line Belt Hook is specially

designed to break if wearer experiences a sudden tug or pull. The

hook will straighten out and release the hand-line should the line

snag a tree limb or other pole attachment. (Ship Wt. .05 lbs.)

Cat. No. H-7

www.americansafety.com 24 hour Fax (704) 481-0450

J. LifeHook® L-Series Pole-Top, 360° - Pole-top mounted fall CLIMBING EQUIPMENT
arrest anchor with 360° rotating davit. A component of a personal
fall arrest system for climber training. Meets OSHA 29 CFR M25Life Lines
1910.269. Two sizes of pole-reinforcing brackets are available.
The 8” bracket is adjustable to fit poles with a top diameter J.
between 6” and 9”; the 10” bracket is adjustable to fit poles with
a top diameter between 8.5” and 10.5”. Available with either a K.
painted finish or an exclusive hot-dip galvanized coating for no L.
compromise durability. 2 year warranty.
Cat. No. Description Ship Wt. M.
L5510-G 10” Bracket, Galvanized 170 lbs.
L558-G 8” Bracket, Galvanized 170 lbs. Call Toll Free (800) 438-6013
L5510-P 10” Bracket, Painted Finish 170 lbs.
L558-P 8” Bracket, Painted Finish 170 lbs.

——————————

K. LifeHook® FB-Series Height-Adjustable, 250° - The
patented FB-series fall arrest anchor can be mounted at any
height on the utility pole with a 6” to 9” diametric
span. Used as a component of a personal fall
arrest system for climber training in compliance
with OSHA 29 CFR 1910.269. The anchor features
a mounting bracket that installs securely and will not
shift on the pole. The FB6 includes a permanently
attached davit that rotates up to 250°. The FB6 can
be used in tandem with other LifeHook® products for
training two climbers on the same pole. Proof-tested
to 5500 lbs. Includes all installation hardware.
Painted finish: royal blue (standard - other colors by
special order). 2 year warranty. (Ship wt. 90 lbs.)
Cat. No. FB-6

——————————

L. The LifeLine self-retracting lifeline has been
designed with safety and ergonomics in mind. Easy to
handle and lightweight. Twin inertia synchronized brake pawls
and a constant triggering speed, regardless of position, allow
great work and versatility. Built with a fall indicating device, snap
hook connector and a breaking mechanism isolated from drum.
It is equipped with corrosion resistant anti-spark parts. Allows
hands-free positioning. Rubber wire end stop acts as a handle.
ABS casing with side handles. No annual recertification. When
subjected to a fall, the unit must be returned for service. Meets
CSA Z259.2.2, ANSI Z359.1 standards and OSHA requirements
for fall protection. Includes 50 feet galvanized steel cable and
carabiner. (Ship. Wt. 21.6 lbs.)
Cat. No. RT50G

——————————

M. FallSafe Self-Retracting Lifelines - Nearly indestructible, the
high impact-resistant nylon housing withstands the harsh rigors
of the toughest applications. The lightest, most rugged line of
composite retractables are designed with smooth, round edges to
increase durability.

• Corrosion-resistant stainless steel and aluminum internal components

extend service life and reduce replacement costs.

• Easy to handle and transport to/from job sites.

• Smooth, quiet operation; engineered spring retraction tension

designed not to pull or drag on a worker to improve productivity

and reduce fatigue.

• Load indicators identify when the unit needs to be removed from CLIMBING
EQUIPMENT
service.

• No annual factory recertification required - lowers cost of ownership

and increases productivity. (Except in Canada where the Canadian

Standards Association requires annual factory recertification.)

• Rated to 400 lbs. capacity when using a SofStop shock absorber.

• Falcon web SRL rated for up to 400 lbs. worker.

Cat. No. Description
FS9925G 30’ stainless steel wire rope
FS9950G 50’ stainless steel wire rope

[email protected]

CLIMBING EQUIPMENT A. Lineman and Cableman’s Handbook - This heavily illustrated
reference has been the bible of electrical transmission since the
M26 Handbooks publication of its first edition in 1928. Covering both overhead and
underground electrical transmission and distribution, it graphically
A. lays out the basic principles, equipment, standards, and safety
regulations, allowing electrical workers to avoid costly errors,
B. diagnose and repair power failures, and ensure optimum safety.

C. Edition: 11th
By: Thomas Shoemaker & James E. Mack
www.americansafety.com Date: August 16th 2006
Format: Hardback, 1024 pages

Cat. No. 3-HB

——————————

B. Lineman and Cableman’s Field Manual: A Compact,
On-The-Job Reference for Lineman and Cablemen -
Fully updated with the latest NEC and OSHA standards,
this one-stop portable guide contains the crucial electrical
data, formulas, calculations, and safety information
essentials at any job site. The Lineman’s and Cableman’s
Field Manual, Second Edition, provides easy-to-follow details
on constructing, operating, and maintaining both overhead
and underground electric distribution and transmission lines.
Helpful charts, tables, diagrams, equations, and definitions
are included through this handy resource.

Edition: 2nd
By: Thomas Shoemaker & James E. Mack
Date: April 28th 2009
Format: Hardback, 388 pages

Cat. No. 2-FM

——————————

CLIMBING C. The Standard Handbook for Electrical Engineers has served
EQUIPMENT the EE field for nearly a century. Originally published in 1907,
through 14 previous editions it has been a required resource
for students and professionals. This new 15th edition features
new material discussing power generation and power systems
operation - two long lasting strengths of the handbook that have
recently become front-burner technology issues. At the same time,
the entire format of the handbook will be streamlined, removing
archaic sections and providing a quick, easy look-up experience.

Edition: 15th
By: Donald G. Fink & H. Wayne Beaty
Date: August 25th 2006
Format: Hardback, 2000 pages

Cat. No. EEHB

24 hour Fax (704) 481-0450

D. Power Generation Handbook - We’ve all lived through long CLIMBING EQUIPMENT
hot summers with power shortages, brownouts, and blackouts. But
at last, all the what-to-do and how-to-do it information you’ll need M27Handbooks
to handle a full range of operation and maintenance tasks at your
fingertips. Written by a power industry expert, Power Generation D.
Handbook: Selection, Applications, Operation, and Maintenance
helps you to gain a thorough understanding of all components,
calculations, and subsystems of the various types of gas
turbines, steam power plants, cogeneration, and
combined cycle plants. This all-in-one resource gives you
step-by-step guidance on how to maximize the efficiency,
reliability and longevity of your power generation plant.

Edition: 1st
By: Philip Kiameh
Date: August 28th 2002
Format: Hardback, 560 pages

Cat. No. 0-07-139604-7

——————————

E. Electrical Generation Handbook - Electrical Transformer
Handbook is dedicated to providing current information on
techniques and technologies available to assist in extending the
life of transformers. Our handbook will discuss testing, monitoring,
design, commissioning, retrofitting and other elements
involved in keeping electrical equipment up and running,
safely and efficiently. This practical handbook shows how it
can be put to use, common problems which an owner will
face, and which is the most appropriate in a particular

E.situation. Anyone working with these devices will find

this a valuable user guide. Theory and mathematics are kept to
a minimum, and instead the everyday working of these devices
is described. Our Transformer Handbook covers transformers,
control techniques, testing and maintenance procedures, and
other useful information.

Volume: 1st
Date: July 2005
Format: 108

Cat. No. ETH

Notes

CLIMBING
EQUIPMENT

[email protected] Call Toll Free (800) 438-6013

CLIMBING EQUIPMENT

M28 Rescue Training Equipment

A. A. The Tuff Kelly line of manikins is durable and robust and of
B. realistic weight. They can be used for a wide variety of extrication-
training scenarios.
C. The full-body manikin with realistic weight for extrication and

D. rescue training.

www.americansafety.com Tuff Kelly is ideal for training confined space, bucket, horizontal,
vertical and pole-top rescue practices. Its realistic weight and
articulation of the manikin requires rescuers to execute proper
skills for handling a real adult victim. The steel frame ensures
longevity and durability throughout numerous training exercises.
The unique manikin construction ensures realistic articulation,
ease of movement for positioning and full range of motion in
extrication scenarios. The manikin platform allows injury and
trauma modules to be used.
Product features:
• Full-body, realistically weighted rescue manikin
• Available in a weight of 150 pounds
• Body is made of extra tough cast vinyl, supported by a

steel frame
• Wire cables and springs allow lifelike movement in all joints
• A 2” diameter eye bolt in head allows for safety, ease of

lifting and storing
• Coveralls, boots and waist belt with “D” ring provided for

the manikin

Cat. No. WTK-1500

——————————

B. Rescue Randy is the Official Manikin of the Firefighter Combat
Challenge. It was developed for lifelike adult or juvenile victim
handling, transportation and extrication training. These manikins
can be safely used in situations too hazardous or uncomfortable
for human volunteers. Made of durable vinyl with 4,100 lb. test
plastic-coated cables. Features include: articulated joints, weight
distribution according to human weight distribution chart. Used by
the U.S. Military, Fire and Police Departments, Safety Teams and
Emergency Personnel for rescue and extrication from pole top,
confined spaces, collapsed buildings, smoke rooms and ladder
carry-down protocols worldwide. Rescue Randy comes with sweat
pants. Rescue Randy has a 3 year warranty.

Cat. No. Size Weight
1335 5’ 5” 105 lbs.
1344 5’ 5” 145 lbs.
1345 5’ 5” 165 lbs.

——————————

C. The Rescue Dummy is for training on pole tops, in buckets
and manhole rescues. Made of DuPont orange Cordura, 1000
denier and is double and triple stitched where necessary. The
industrial zippers are tucked away under material to prevent
catching heavy duty seat belt webbing formed into belt loops to
prevent belt from riding up on torso. (Ship Wt. 6 lbs.)

Empty weight 6 lbs. SHIPS EMPTY, weight must be added to meet your specs.

Cat. No. 14-007

——————————

CLIMBING D. The Pole Top Rescue Strap helps the line worker truly
EQUIPMENT simulate cutting a victim down from a pole without destroying
perfectly good equipment. It holds a rescue dummy in place so
the rescue can be performed. Just cut insert to free and rescue
manikin. 2 - 12” long 4 hole 57A inserts are included with this unit.
Additional inserts must be purchased.
Cat. No. Description Ship Wt.
57N Rescue Strap Assembly 6 lbs.
57A Single Replacement Insert .5 lbs.
57A-BULK 50’ Roll of Replacement Insert 25 lbs.

24 hour Fax (704) 481-0450