Fiat Panda 2012 plus manual

WARNING SIDE LIGHTS AND DIPPED BEAM GETTING TO
HEADLIGHTS KNOW YOUR CAR
The daytime running lights are an SAFETY
alternative to the dipped beam With the ignition key turned to MAR, turn the ring STARTING AND
headlights for driving during the daytime in nut A fig. 31 to . If dipped beams are activated, DRIVING
countries where it is compulsory to have lights the daytime running lights go out and the side lights
on during the day, and they are also permitted and dipped headlights come on. The warning
in those countries where this not obligatory. light will come on in the instrument panel.

WARNING When the ignition key is turned to STOP or
removed and the ring nut is turned from O to , all
Daytime running lights cannot replace the side lights and number plate lights switch on.
dipped beam headlights when driving at The warning light will come on in the
night or through tunnels.The use of daytime instrument panel.
running lights is governed by the highway code
of the country in which you are driving. Comply PARKING LIGHTS WARNING LIGHTS
with legal requirements. AND MESSAGES
These lights can only be turned on with ignition key
in STOP position or removed, by moving the ring nut IN AN EMERGENCY
A first to position O and then to position .

The warning light switches on on the instrument
panel.

MAIN BEAM HEADLIGHTS SERVICING AND
MAINTENANCE
To activate the main beam headlights, with ring nut at TECHNICAL
, pull the stalk towards the steering wheel. The SPECIFICATIONS

warning light switches on in the instrument panel.

When the stalk is pulled towards the steering wheel
again, the lights deactivate, the dipped headlights
reactivate and the warning light switches off.

INDEX

47

GETTING TO FLASHING “FOLLOW ME HOME” DEVICE
KNOW YOUR CAR
You can flash the headlights by pulling the stalk This allows the space in front of the car to be lit up
SAFETY towards the wheel (unstable position). The for a certain period of time.

STARTING AND warning light will come on in the instrument Activation: with the ignition key on STOP or
DRIVING panel. removed, pull the stalk towards the steering wheel
within 2 minutes from when the engine is turned off.
WARNING LIGHTS DIRECTION INDICATORS
AND MESSAGES At each single movement of the stalk, the lights
Bring the stalk to the (stable) position: will remain on for an extra 30 seconds up to a
IN AN EMERGENCY upwards: right direction indicator activation; maximum of 210 seconds; then the lights are
downwards: left direction indicator activation. switched off automatically.
SERVICING AND Warning light or will flash in the instrument
MAINTENANCE panel. The indicators switch off automatically when Each time the stalk is operated, the warning light
the steering wheel is straightened. on the instrument panel switches on and the display
also shows a message and how long the function
Lane change function will remain active.

If you wish to signal a lane change, place the left stalk The warning light switches on when the stalk is
in the unstable position for less than half a second. first moved and stays on until the function is
The direction indicator on the side selected will flash automatically deactivated. Each time the stalk is
five times and then switch off automatically. activated it increases the time that the lights remain
on.

Deactivation: keep the stalk pulled towards the
steering wheel for more than two seconds.

TECHNICAL
SPECIFICATIONS

INDEX

48

WINDOW CLEANING Move the stalk upwards (unstable position) to limit GETTING TO
operation to the time for which the stalk is held KNOW YOUR CAR
The right stalk controls windscreen wiper/washer in this position. When released, the stalk will return
and rear window wiper/washer operation. to its default position and the wiper will be SAFETY
automatically stopped.
WINDSCREEN WASHER/WIPER STARTING AND
With the ring nut A fig. 32 in position , the DRIVING
It can be operated only with the ignition key turned windscreen wiper will automatically adapt operating
to MAR-ON. speed to the speed of the car.
The ring nut A fig. 32 can be moved to four different
positions: With the windscreen wiper operational, if reverse
gear is engaged, the rear window wiper is
windscreen wiper off. automatically activated.
intermittent operation.
continuous slow operation. Never use the windscreen wiper to remove WARNING LIGHTS
continuous fast operation. layers of snow or ice from the windscreen. AND MESSAGES
In such conditions, the windscreen wiper
may be subjected to excessive stress and the IN AN EMERGENCY
overload cut-out, which prevents operation for a
few seconds, may intervene. If operation is not SERVICING AND
restored (even after turning the key and MAINTENANCE
restarting the car engine), contact a Fiat TECHNICAL
Dealership. SPECIFICATIONS

Do not operate the windscreen wiper with
the blades lifted from the windscreen.

fig. 32 F0W0126 INDEX

49

GETTING TO "Smart washing" function With the windscreen wiper on and reverse gear
KNOW YOUR CAR engaged, rear window wiping will be continuous.
Pull the stalk towards the steering wheel (unstable
SAFETY position) to activate the windscreen washer. Pushing the stalk towards the dashboard (unstable
STARTING AND position) the rear window washer jet will activate.
Keeping the stalk pulled for more than half a second, Keep the stalk pushed for more than half a second to
DRIVING with just one movement it is possible to operate activate the rear window wiper as well. Releasing
the washer jet and the wiper at the same time. the stalk will activate the smart washing function, as
described for the windscreen wiper.
The wiper stops working three strokes after the
stalk is released. The function stops when the stalk is released.

A further stroke after approximately six seconds Do not use the rear window wiper to
completes the wiping cycle. remove layers of snow or ice. In these
conditions, the windscreen wiper may be
WARNING LIGHTS REAR WINDOW WASHER/ WIPER submitted to excessive effort resulting in the
AND MESSAGES motor protection cutting in and wiper operation
It can be operated only with the ignition key turned being inhibited for a few seconds. If operation
IN AN EMERGENCY to MAR-ON. is not restored, contact a Fiat Dealership.

SERVICING AND Activation
MAINTENANCE
Turn ring nut B fig. 32 from position O to position
TECHNICAL to operate the rear window wiper as follows:
SPECIFICATIONS
❒ in intermittent mode when the windscreen wiper
is not operating;

❒ in synchronous mode (at half the speed of the
windscreen wiper) when the windscreen wiper
is operating;

❒ in continuous mode with reverse gear engaged and
the control active.

INDEX

50

ROOF LIGHTS A switch positions: GETTING TO
KNOW YOUR CAR
FRONT ROOF LIGHT ❒ central position (position 1): lights C and D switch
on/off when the doors are opened/closed; SAFETY
Single-bulb roof light
The lens of roof light A fig. 33 has three positions: ❒ pressed to the left (position 0): lights C and D are STARTING AND
❒ right side pressed: light always on always switched off; DRIVING
❒ left side pressed: light always off WARNING LIGHTS
❒ central position (neutral): the light switches on and ❒ pressed to the right (position 2): lights C and D AND MESSAGES
are always switched on.
off when the doors are opened or closed. IN AN EMERGENCY
The lights switch on/off gradually.
Multi-bulb roof light
(for versions/markets, where provided) B switch positionsfig. 34:
The switch A fig. 34 switches on/off the roof light
bulbs. ❒ central position (position 1): lights C and D are
always switched off;

❒ pressed to the left (position 0): light C switches
on;

❒ pressed to the right (position 2): light D switches
on.

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

fig. 33 F0W0237 fig. 34 F0W0051 INDEX

51

GETTING TO IMPORTANT Before getting out of the car, make Three modes are provided for switching off:
KNOW YOUR CAR sure that both switches are in the central position:
when the doors are closed the lights will switch ❒ when all doors are closed, the 3-minute timer will
SAFETY off to avoid draining the battery. In any case, if the stop and a 10-second one will start. This timer will
switch is left in the on position, the roof light stop when the key is turned to MAR;
switches off automatically about 15 minutes after the
engine has been switched off. ❒ when doors are locked (either with remote
control or with key on driver side door), the roof
STARTING AND ROOF LIGHT TIMING light switches off.
DRIVING
On certain versions, to facilitate getting into/out of ❒ the courtesy lights are switched off in any case
the car, especially at night or in poorly-lit areas, after 15 minutes to preserve battery charge
two timed modes have been provided.
Timing when getting out of the car
WARNING LIGHTS Timing when getting into the car
AND MESSAGES After removing the key from the ignition switch, the
The roof lights switch on according to the following roof lights switch on as follows:
IN AN EMERGENCY modes:
❒ if the ignition key is removed within 3 minutes
SERVICING AND ❒ for about 10 seconds when the doors are from the engine stopping, the roof lights switch on
MAINTENANCE unlocked; for 10 seconds;

❒ for about 3 minutes when one of the doors is ❒ for about 3 minutes when one of the doors is
opened; opened;

❒ for about 10 seconds when the doors are closed. ❒ for about 10 seconds when one of the doors is
closed.
The timing is interrupted when the ignition key is
turned to MAR. The timing stops automatically when the doors are
locked.

TECHNICAL
SPECIFICATIONS

INDEX

52

LUGGAGE COMPARTMENT ROOF LIGHT CONTROLS GETTING TO
(for versions/markets, where provided) KNOW YOUR CAR
HAZARD WARNING LIGHTS
The roof light is located on the left side of the SAFETY
luggage compartment. This switches on automatically Press button A fig. 35 to switch the lights on/off.
when the luggage compartment is opened and Warning lights and on the instrument panel STARTING AND
switches off when it is closed. The light switches switch on and switch A flashes when the lights are DRIVING
on/off regardless of the ignition key position. on.
WARNING LIGHTS
IMPORTANT The use of hazard warning lights is AND MESSAGES
governed by the highway code of the country you are
driving in: comply with legal requirements. IN AN EMERGENCY

Emergency braking

In the event of emergency braking the hazard
warning lights switch on automatically as well as
warning lights and in the instrument panel. The
lights switch off automatically when emergency
braking ceases.

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

fig. 35 F0W0191 INDEX

53

GETTING TO FOG LIGHTS DUALDRIVE ELECTRIC POWER STEERING
KNOW YOUR CAR (for versions/markets, where provided) (for versions/markets, where provided)

SAFETY Press button fig. 36 to switch the lights on/off. Press the CITY button fig. 37 to activate the function
Press the button again to switch the lights off. With (see paragraph "Dualdrive electric power steering"
STARTING AND lights on, the warning light on the instrument in this section). When this function is active, the
DRIVING panel will switch on. word CITY on the instrument panel will light up. To
deactivate the function press the button again.
WARNING LIGHTS REAR FOG LIGHTS
AND MESSAGES
Press the fig. 36 button to switch the lights on/off.
The rear fog lights are only switched on with the
dipped headlights or front fog lights on. Press the
button again to switch the lights off, or switch off the
dipped headlights or the front fog lights (for
versions/markets, where provided).

With the lights on, warning light in the instrument
panel switches on.

IN AN EMERGENCY

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX fig. 36 F0W0192 fig. 37 F0W0082

54

ECO FUNCTION ❒ the automatic switching on of the interior lights GETTING TO
(for versions/markets, where provided) ❒ the switching on of the hazard warning lights. KNOW YOUR CAR

Press the ECO button fig. 38 to activate the function. On some versions, the intervention of the system is SAFETY
indicated by a message shown on the display.
When the ECO function is active, the car is set for STARTING AND
driving characterised by reduced fuel consumption. IMPORTANT Carefully check the car for fuel leaks, DRIVING
When the function is active, the corresponding LED for instance in the engine compartment, under WARNING LIGHTS
on the button switches on. the car or near the tank area. After an impact, turn AND MESSAGES
the ignition key to STOP to prevent the battery from
This function stays in the memory and, when the running down. IN AN EMERGENCY
vehicle is started again, the system keeps the setting To restore the correct operation of the car, proceed
it had before the engine was stopped. Press the as follows: SERVICING AND
ECO button again to deactivate the function and ❒ turn the ignition key to the MAR position; MAINTENANCE
restore the normal driving setting. ❒ activate the right direction indicator; TECHNICAL
❒ deactivate the right direction indicator; SPECIFICATIONS
FUEL CUT-OFF SYSTEM ❒ activate the left direction indicator;
❒ deactivate the left direction indicator; INDEX
This intervenes in the case of an impact causing: ❒ activate the right direction indicator;
❒ deactivate the right direction indicator; 55
❒ the interruption of the fuel supply with the engine ❒ activate the left direction indicator;
consequently cutting out; ❒ deactivate the left direction indicator;
❒ turn the ignition key to the STOP position.
❒ the automatic unlocking of the doors;
WARNING

If, after an impact, you smell fuel or
notice leaks from the fuel system, do not
reactivate the system to avoid the risk of fire.

fig. 38 F0W0039

GETTING TO INTERIOR FITTINGS With the "smoker's kit" optional, the cigar lighter is
KNOW YOUR CAR fitted instead of the power socket.
PASSENGER SIDE GLOVE COMPARTMENT
Operate handle A fig. 39 to open the compartment. To activate the cigar lighter, press the button with
the ignition key at MAR. After about 15 seconds the
SAFETY WARNING button reverts automatically to its initial position
STARTING AND and the cigar lighter is ready for use.
Never travel with the glove
DRIVING compartment open: it could injure the WARNING
passenger in the event of a crash.
The cigar lighter becomes very hot.
WARNING LIGHTS POWER SOCKET Handle it carefully and make sure that
AND MESSAGES children do not touch it: risk of fire and/or
It is located on the central tunnel fig. 40, near the burns. Always check that the cigar lighter plug
handbrake lever. It only operates with the ignition has been released.
key at MAR.

IN AN EMERGENCY IMPORTANT Do not damage the socket by using
unsuitable adaptors.

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX fig. 39 F0W0057 fig. 40 F0W0178

56

ASHTRAY SUN VISORS GETTING TO
(for versions/markets, where provided) KNOW YOUR CAR
These are located at the sides of the rear-view SAFETY
The ashtray is a removable spring-loaded plastic mirror. They can be adjusted forwards and sideways.
container that must be fitted into the right cup/can
holder on the central tunnel fig. 41. when specified, the back of the driver's and
passenger side visors houses two courtesy mirrors
IMPORTANT Do not use the ashtray as a waste (for versions/markets, where provided). To use
paper basket: it may catch fire in contact with the mirror, open the sliding cover A fig. 42.
cigarette stubs.
STARTING AND
IMPORTANT Do not damage the socket by using DRIVING
unsuitable adaptors.

WARNING LIGHTS
AND MESSAGES

IN AN EMERGENCY

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

fig. 41 F0W0076 fig. 42 F0W0055 INDEX

57

GETTING TO GLASSES HOLDER EXTINGUISHER
KNOW YOUR CAR (for versions/markets, where provided) (for versions/markets, where provided)

It is located on the left of the driver's side visor It is located under the passenger side front seat or, in
fig. 43. some versions, at the right side of the luggage
compartment, inside a dedicated container.

SAFETY

STARTING AND
DRIVING

WARNING LIGHTS
AND MESSAGES

IN AN EMERGENCY

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX fig. 43 F0W0308

58

SUN ROOF GETTING TO
KNOW YOUR CAR
(for versions/markets, where provided)
The large electric sun roof comprises two glass SAFETY
panels; the front one is mobile and the rear one
fixed. These are equipped with two sun blinds (front STARTING AND
and rear) that can be moved manually. With the DRIVING
sun roof closed, the blinds can be placed in any
position. To open the blinds, grip handle A fig. 44, WARNING LIGHTS
following the direction indicated by the arrow until AND MESSAGES
the desired position is reached. To close them, carry
out the procedure in reverse. IN AN EMERGENCY
The sun roof can be operated only with the ignition
key turned to MAR. The controls B and C fig. 44 SERVICING AND
on the front roof light trim operate the roof MAINTENANCE
opening/closing functions. TECHNICAL
SPECIFICATIONS
Opening
Press and hold down button C. The front glass panel F0W0152 INDEX
will move into the spoiler position.
After opening in spoiler position, press button C 59
fig. 44 for more than half a second to bring the roof
automatically to fully open position. The automatic
roof movement can be stopped in any position by
pressing a button (B or C) again.

fig. 44

GETTING TO Closure ANTI-PINCH SAFETY DEVICE
KNOW YOUR CAR
Press button B from the fully open position fig. 44. If For versions/markets where provided, the sun roof
SAFETY the button is pressed for more than half a second, has an anti-pinch safety system capable of detecting
the roof will automatically move to spoiler position. the presence of an obstacle whilst the roof is closing;
if this happens, the system intervenes and the
From the spoiler position, press button B fig. 44 movement of the glass is immediately reversed.
again to reach the fully closed position.

STARTING AND Do not open the sunroof if there is snow
DRIVING or ice on it: you may damage it. In
vehicles with sun roof no roof rack can be
fitted.

WARNING LIGHTS WARNING
AND MESSAGES
When leaving the car, always remove the
IN AN EMERGENCY key from the ignition to avoid the risk
of injury to those still inside the car due to
SERVICING AND accidental operation of the sunroof. Improper
MAINTENANCE use of the roof may be dangerous. Before and
during operation, always check that no-one
is exposed to the risk of being injured by the
moving sunroof or by objects getting caught or
hit by it.

TECHNICAL
SPECIFICATIONS

INDEX

60

EMERGENCY OPERATION INITIALISATION PROCEDURE GETTING TO
KNOW YOUR CAR
If the electric device for moving the roof fails, the Following an automatic motion malfunction while
sun roof can be moved manually proceeding as opening/closing or an emergency manoeuvre (see SAFETY
described below: description in the previous paragraph), the automatic
operation of the sun roof must be initialised again. STARTING AND
❒ for manual activation remove the protective cap A DRIVING
fig. 45 from its housing which is located on the Proceed as follows: WARNING LIGHTS
internal covering in front of the sun blind AND MESSAGES
❒ press button B fig. 44 in closing position;
❒ take the Allen key provided and located in the tool IN AN EMERGENCY
box in the luggage compartment or, depending on ❒ hold down button B: after approximately 10
the version, inside the glove compartment; seconds the roof moves jerkily to closing position. SERVICING AND
Once the operation has ended (roof closed) MAINTENANCE
❒ insert the key provided into the housing A fig. 45 release button B; TECHNICAL
and turn it clockwise to open the roof or SPECIFICATIONS
anticlockwise to close the roof. ❒ turn the ignition key to STOP and keep it there for
10 seconds;

❒ turn the ignition key to the MAR position;

❒ Press button B in closed position;

❒ hold down button B until the roof is completely
closed: the initialisation procedure has ended;

❒ press button B again within 3 seconds from the
conclusion of the initialisation procedure;

❒ hold down button B: the roof will perform an
automatic opening and closing cycle: should this
not occur, repeat the operation from the
beginning;

❒ keeping button B held down, wait until the roof is
completely closed.

fig. 45 F0W0105 INDEX

61

DOORS To lock

GETTING TO Turn the key fig. 46 to position 2 with the door
KNOW YOUR CAR LOCKING/UNLOCKING FROM OUTSIDE perfectly closed.

SAFETY To unlock With central door locking (for versions/markets
where provided) all doors must be shut properly.
STARTING AND Turn the key fig. 46 to position 1 and pull the handle With remote control (for versions/markets where
DRIVING upwards. provided) press the button to close the doors.
If one of the doors is not shut properly, simultaneous
WARNING LIGHTS With central door locking (for versions/markets locking is disabled.
AND MESSAGES where provided), the doors are unlocked
simultaneously when the key is turned. IMPORTANT If one of the front doors is not fully
closed or in the event of system failure, central door
With remote control (for versions/markets where locking will not operate and, after 10/11 attempts
provided) press the button to open the doors. in quick succession, the system will be excluded for
about 30 seconds.
IMPORTANT Before opening a door, ensure that you
can do it in conditions of safety. Open the doors
only when the car is stationary.

IN AN EMERGENCY IMPORTANT Open the doors only when the car is
stationary.

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX fig. 46 F0W0321

62

LOCKING/UNLOCKING FROM INSIDE IMPORTANT On the other doors, the lever will only GETTING TO
lock the door concerned. KNOW YOUR CAR
To unlock
IMPORTANT The locked door condition is indicated
Pull the control lever A fig. 47. by the red printing B fig. 48.

With central door locking system (for versions/ SAFETY
markets, where provided), operating the lever A on
the driver's side will unlock all the doors. Lever A on STARTING AND
the other doors will only open the corresponding DRIVING
door.
WARNING LIGHTS
To lock AND MESSAGES

Push the control lever A fig. 47 towards the door.
Operating the lever A on driver's side will lock
all doors. With mechanical locks, without central
locking, closing takes place by operating the
individual control levers.

IN AN EMERGENCY

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

fig. 47 F0W0306 fig. 48 F0W0307 INDEX

63

GETTING TO CHILD LOCK DEVICE
KNOW YOUR CAR
This system prevents the rear doors from being
SAFETY opened from the inside.
STARTING AND
Device A fig. 49 can only be engaged with the doors
DRIVING open:

❒ position 1 - device engaged (door locked);

❒ position 2 - device not engaged (door may be
opened from the inside).

The device remains on even if the doors are
unlocked electrically.

IMPORTANT The rear doors cannot be opened
WARNING LIGHTS from the inside when the child lock device is
AND MESSAGES engaged.

IN AN EMERGENCY WARNING
SERVICING AND
MAINTENANCE Always use this device when carrying
children. After engaging the child lock on
both rear doors, check for effective engagement
by trying to open a door with the internal
handle.

TECHNICAL
SPECIFICATIONS

INDEX fig. 49 F0W0080

64

DOOR LIMITER DEVICE ELECTRIC WINDOWS GETTING TO
KNOW YOUR CAR
The limiter device for front door A fig. 50 and rear FRONT ELECTRIC WINDOWS
door B fig. 50 keeps the door in any opening or SAFETY
closing position chosen. These operate when the ignition key is turned to
MAR and for about three minutes after turning the STARTING AND
key to STOP or removing it. DRIVING

The electric window control buttons are located WARNING LIGHTS
beside the gear lever and activate fig. 51: AND MESSAGES

A Opening/closing of the left window.

B Opening/closing of the right window.

When one of the two buttons is pressed briefly, the
window moves. Only with the key at MAR, a long
press activates the automatic operation of the
window: raising/lowering on the driver's side and
lowering only the passenger side.

IN AN EMERGENCY

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

fig. 50 F0W0305 fig. 51 F0W0162 INDEX

65

GETTING TO WARNING LUGGAGE COMPARTMENT
KNOW YOUR CAR Improper use of the electric windows
may be dangerous. Before and during The luggage compartment unlocking is electrically
SAFETY operation, always check that no-one is exposed operated and is deactivated when the car is in
to the risk of being injured either directly by motion.
STARTING AND the moving window or through objects getting
DRIVING caught or by being hit. OPENING

WARNING LIGHTS WARNING By mechanical key
AND MESSAGES When leaving the car, always remove the
ignition key to avoid the risk of injury For versions without remote control, the luggage
IN AN EMERGENCY of people still on board due to accidental compartment can be opened from outside the
operation of the electric windows. vehicle using a mechanical key in the latch on the
SERVICING AND tailgate handle.
MAINTENANCE MANUAL REAR WINDOW WINDERS
To open/close the window operate the handle on the By remote control
door panel. (for versions/markets, where provided)

Press button of remote control to unlock the
luggage compartment. The direction indicators will
blink twice.

TECHNICAL
SPECIFICATIONS

INDEX

66

By electrical handle (soft touch) Emergency opening from inside GETTING TO
(for versions/markets, where provided) KNOW YOUR CAR
Proceed as follows:
For some versions, the tailgate (when unlocked) can ❒ remove the rear head restraints and completely SAFETY
only be opened from outside the vehicle using the
electrical handle A fig. 52 located under the handle fold back the seats (see the paragraph “Expanding STARTING AND
until a click is heard which indicates unlocking. the luggage compartment”); DRIVING
The tailgate can be opened at any time, if the doors ❒ remove the protective cap and release the lock WARNING LIGHTS
are unlocked. To open it, enable the handle, opening using a screwdriver or the metal insert fig. 53. AND MESSAGES
one of the front doors or unlocking the doors
with the remote control or using the key without WARNING IN AN EMERGENCY
remote control.
Be careful not to hit objects on the
When the luggage compartment is opened, the storage shelf when you open the luggage
interior light switches on (for versions/markets, compartment tailgate.
where provided): the light switches off automatically
when the luggage compartment is closed. The light
switches off automatically after a few minutes if
the tailgate is left open.

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

fig. 52 F0W0031 fig. 53 F0W0041 INDEX

67

CLOSING LUGGAGE COMPARTMENT
INITIALISATION
GETTING TO Pull the tab A fig. 54 and lower the tailgate by
KNOW YOUR CAR pressing next to the lock until it clicks. IMPORTANT If the battery is disconnected or the
protection fuse blows, the luggage compartment
IMPORTANT Before closing the luggage opening/closing mechanism must be reinitialised as
follows:
SAFETY compartment make sure that you have the keys since
the luggage compartment is automatically locked. ❒ close all the doors and the luggage compartment;

STARTING AND ❒ Press the button on the remote control;
DRIVING
❒ press the button on the remote control.

WARNING LIGHTS
AND MESSAGES

IN AN EMERGENCY

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX fig. 54 F0W0193

68

EXTENDING THE LUGGAGE ❒ if there is a third rear seat (for versions/markets, GETTING TO
COMPARTMENT where provided), release the central belt, winding KNOW YOUR CAR
the buckle into its housing on the roof panel;
Removing the parcel shelf SAFETY
❒ operate the levers at the sides of the rear seats
Proceed as follows: fig. 57 pushing them towards the inside of the STARTING AND
❒ free the ends of the two parcel shelf mounting car, fold the backrest and then bring the backrest DRIVING
onto the cushion.
links A fig. 55 by removing the eyelets B from WARNING LIGHTS
the mounting pins; The car can be fitted with split rear backrest as an AND MESSAGES
❒ free the pins C fig. 56 outside the shelf then optional on some versions. The boot extension
remove the parcel shelf D sliding it off outwards; possibilities are many and can be chosen according to
❒ after removal, the parcel shelf can be loaded the number of passengers and the amount of
sideways into the luggage compartment. luggage to be carried:

Extending the boot with rear fixed seat ❒ total extension on the right and left sides
operating as on the non-split version;
After removing the parcel shelf, proceed as follows:
❒ move the seat belts to the side, making sure IN AN EMERGENCY

that they are correctly extended and not twisted;

SERVICING AND
MAINTENANCE

D
TECHNICAL
SPECIFICATIONS

fig. 55 F0W0194 C F0W0195 INDEX

fig. 56 69

GETTING TO ❒ partial extension on the right side, with folded Extending the boot with rear sliding seat
KNOW YOUR CAR backrest, for transporting two passengers on
the left side; Partial
SAFETY
❒ partial extension on the left side, with folded Use the lever A fig. 58 (in the passenger's
STARTING AND backrest, for transporting one passengers on the compartment) or the central tab D fig. 59 in the
DRIVING right side. luggage compartment to move the seat forward.

WARNING LIGHTS Repositioning the rear seat: move the seat belts to Total
AND MESSAGES the side, making sure that they are correctly
extended and not twisted. Lift up the backrest folded Remove the parcel shelf as previously described.
previously until a click is heard for the engagement
mechanism. Using the lever A fig. 58 (in the passenger's
compartment) or the central tab D fig. 59 in the
luggage compartment, move the seat "all forward".

Lift lever B or C fig. 58 or pull side tabs E or F fig. 59
in the luggage compartment to release the seat
backrest section to tilt; act on both if you want to
tilt the whole backrest.

IN AN EMERGENCY

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX fig. 57 F0W0088

70

To bring back the seat in its standard position, lift the SECURING YOUR LOAD GETTING TO
backrest and push it backwards until you hear the KNOW YOUR CAR
locking click and make sure the seat belts are at the The luggage compartment contains two attachments SAFETY
front of the backrest. for the cables that secure the load transported and STARTING AND
another two attachments are located on the rear DRIVING
WARNING crossmember.

Once you have released the adjustment WARNING
lever, always check that the seat is
locked on the guides by trying to move it back Every attachment has a maximum load
and forth. Failure to lock the seat in place could capacity of 100 kg.
result in the seat moving suddenly.

WARNING WARNING LIGHTS
AND MESSAGES
A heavy load that has not been secured
may cause serious injuries in the event
of an accident.

IN AN EMERGENCY

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

fig. 58 F0W0303 fig. 59 F0W0304 INDEX

71

GETTING TO WARNING CARGO BOX
KNOW YOUR CAR
If you are travelling in an area with (for versions/markets, where provided)
SAFETY limited opportunities for vehicle
STARTING AND refuelling and you wish to bring petrol with you It consists of a preformed box, which is located in
in a petrol can, you must do so in compliance the luggage compartment and can be used to store
DRIVING with current regulations and using an approved objects.
can, appropriately secured to the load securing
attachments. However, by doing so, you increase It expands the load capacity and organises the space
the risk of fire in case of an accident with in the luggage compartment.
your vehicle.

WARNING LIGHTS
AND MESSAGES

IN AN EMERGENCY

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX fig. 60 F0W0312

72

BONNET WARNING GETTING TO
KNOW YOUR CAR
OPENING The bonnet may drop suddenly if the
supporting rod is not positioned SAFETY
Proceed as follows: correctly.
STARTING AND
❒ pull lever A fig. 61 in the direction indicated by the Use both hands to lift the bonnet. Before DRIVING
arrow; lifting, check that the windscreen wiper WARNING LIGHTS
arms are not raised from the windscreen, AND MESSAGES
❒ move lever B fig. 62 to the left as shown in the that the car is stationary and that the handbrake
figure; is engaged.

❒ lift the bonnet and, at the same time, release the
supporting rod C fig. 63 from its catch D, then
insert the end of the rod into housing E in the
bonnet (larger hole) and push to safety position
(smaller hole), as shown in the figure.

IN AN EMERGENCY

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

fig. 61 F0W0096 fig. 62 F0W0097 INDEX

73

GETTING TO CLOSING ❒ lower the bonnet to approximately 20 centimetres
KNOW YOUR CAR from the engine compartment and let it drop.
Proceed as follows: Make sure that the bonnet is completely closed
SAFETY and not only fastened by the safety catch by trying
❒ keep the bonnet raised with one hand and remove to open it. If it is not perfectly closed, do not try
rod C fig. 63 from housing E with the other, to press the bonnet lid down but open it and
inverting the opening motion, then fit it back into repeat the procedure.
its catch D;
IMPORTANT Always check that the bonnet is closed
STARTING AND correctly to avoid it opening while the car is
DRIVING travelling.

WARNING LIGHTS WARNING
AND MESSAGES
Perform these operations only when the
IN AN EMERGENCY car is stationary.

The following plate fig. 64 is applied inside the engine
compartment:

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX fig. 63 F0W0095 fig. 64 F0W1004

74

ROOF RACK/SKI RACK WARNING GETTING TO
KNOW YOUR CAR
The attachments B fig. 65 are located in the areas Never exceed the maximum permitted
illustrated in the figure and can only be accessed with loads (see chapter "Technical SAFETY
the doors open and after removing the flaps A specifications").
fig. 65 from the roof. The Lineaccessori Fiat includes STARTING AND
a dedicated roof rack/ski rack for this car. Follow DRIVING
the instructions contained in the assembly kit to fit WARNING LIGHTS
the roof rack/ski rack. AND MESSAGES

Vehicle with longitudinal roof rack bars IN AN EMERGENCY

The areas for the attachments are highlighted by SERVICING AND
reference holes B fig. 65. Holes B are located on the MAINTENANCE
longitudinal roof rack bars, on the side towards TECHNICAL
the vehicle centre line. Do not fit the roof rack in SPECIFICATIONS
positions different from those indicated by holes B.
The Lineaccessori Fiat includes a dedicated roof INDEX
rack/ski rack for this car with longitudinal roof rack
bars. Follow the instructions contained in the 75
assembly kit to fit the roof rack/ski rack.

Vehicle with sun roof

There is not roof rack for vehicles with sun roof.

WARNING

After travelling for a short distance,
check that the fixing screws for the
attachments are correctly tightened.

fig. 65 F0W0098

GETTING TO WARNING HEADLIGHTS
KNOW YOUR CAR
Evenly distribute the load and take into LIGHT BEAM DIRECTION
account, when driving, the increased
responsiveness of the car to side wind. The correct alignment of the headlights is important
for the comfort and safety of not only the driver
SAFETY Fully comply with the regulations in force but all other road users. This is also covered by
STARTING AND concerning maximum clearance. a specific rule of the highway code.

DRIVING The headlights must be correctly aimed to guarantee
the best visibility conditions for all drivers while
WARNING LIGHTS travelling with headlights on.
AND MESSAGES
Contact a Fiat Dealership to have the lights checked
IN AN EMERGENCY and adjusted, if necessary.

Check beam alignment every time the load or its
distribution changes.

HEADLIGHT ALIGNMENT CORRECTOR

This device works with the ignition key in the MAR
position and the dipped headlights on.

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX

76

Headlight alignment adjustment FOG LIGHT ALIGNMENT GETTING TO
(for versions/markets, where provided) KNOW YOUR CAR
To adjust press buttons or fig. 66. The
instrument panel display shows the position in Contact a Fiat Dealership to have the lights checked SAFETY
relation to the adjustment set. and adjusted, if necessary.
STARTING AND
Position 0 - one or two persons on the front seats ADJUSTING THE HEADLIGHTS WHEN DRIVING
ABROAD
Position 1 - 4/5 persons WARNING LIGHTS
Dipped headlights are adjusted to drive in the AND MESSAGES
Position 2 - 4/5 persons + load in the luggage country where the vehicle was originally purchased.
compartment When travelling in countries with opposite driving
direction, to avoid dazzling the drivers on the other
Position 3 - driver + maximum permitted load all side of the road, you need to cover areas of the
stowed in the luggage compartment. headlight according to the Highway code of the
country you are travelling in.
IMPORTANT Check alignment every time the load
carried changes.

IN AN EMERGENCY

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

fig. 66 F0W0318 INDEX

77

GETTING TO ABS WARNING
KNOW YOUR CAR
ABS is an integral part of the braking system which When the ABS cuts in and you feel the
SAFETY prevents, whatever the road conditions and force brake pedal pulsating, do not raise
STARTING AND applied to the brake pedal, one or more wheels from your foot, but keep it pressed; in doing so you
locking and consequently slipping, thus ensuring will stop in the shortest amount of space
DRIVING that the car remains under control even during possible depending on the current road
emergency braking. conditions.

The EBD system (Electronic Braking Force WARNING
Distribution) completes the system allowing the
brake force to be distributed between the front and If the ABS system intervenes, this
rear wheels. indicates that the traction of the tyres
on the road is nearing its limit.You must slow
WARNING LIGHTS IMPORTANT To obtain the maximum efficiency of down to a speed compatible with the available
AND MESSAGES the braking system, a bedding-in period of about 500 traction.
km is needed: during this period it is better to
avoid sharp, repeated and prolonged braking.

IN AN EMERGENCY WARNING MSR SYSTEM
SERVICING AND (Motor Schleppmoment Regelung)
MAINTENANCE The ABS gets the most from the
available grip, but it cannot improve it; This system is an integral part of the ABS, that
you should therefore take every care when intervenes, if there is sudden downshifting, restoring
driving on slippery surfaces and not take torque to the engine, thereby preventing excessive
unnecessary risks. drive at the drive wheels which, especially in poor
grip conditions, could lead to a loss in stability of the
TECHNICAL SYSTEM INTERVENTION car.
SPECIFICATIONS
The driver can feel that the ABS system has come
INDEX into action because the brake pedal pulsates slightly
and the system gets noisier: it means that the speed
should be altered to suit the type of road surface.

78

MECHANICAL BRAKE ASSIST ESC SYSTEM GETTING TO
(emergency braking assistance) (Electronic Stability Control) KNOW YOUR CAR
(for versions/markets, where provided)
(for versions/markets, where provided) SAFETY
This system, which cannot be deactivated, recognises
emergency braking conditions (according to the This is an electronic system that controls car stability STARTING AND
brake pedal operation speed) and provides an in the event of tyre grip loss, helping maintain DRIVING
additional hydraulic braking pressure to support that directional control. The system is capable of
provided by the driver. This allows faster and more recognising potentially dangerous situations in terms WARNING LIGHTS
powerful operation of the braking system. of the stability and intervenes automatically on the AND MESSAGES
brakes in a differentiated manner for the four wheels
WARNING in order to provide a stabilizing torque. IN AN EMERGENCY

When the Mechanical Brake Assist The ESC system also includes the following
intervenes, noises may be heard from subsystems:
the system.This is normal. In any case, keep the
brake pedal firmly depressed while braking. ❒ Hill Holder

❒ ASR

❒ HBA

❒ ABS

❒ EBD

SYSTEM INTERVENTION SERVICING AND
MAINTENANCE
It is signalled by the flashing of the ESC warning light
on the instrument panel, to inform the driver that
the car is in critical stability and grip conditions.

SYSTEM ACTIVATION TECHNICAL
SPECIFICATIONS
The ESC system switches on automatically when the
engine is started and cannot be switched off.

INDEX

79

GETTING TO HILL HOLDER SYSTEM NOTE The Hill Holder system is not active with
KNOW YOUR CAR engaged parking brake.
This system is an integral part of the ESC system and
SAFETY facilitates starting on slopes. IMPORTANT The Hill Holder system is not a parking
brake; therefore, never leave the vehicle without
STARTING AND It is activated automatically in the following instances: having engaged the handbrake, turned the engine off
DRIVING and engaged the first gear, so that the parked vehicle
❒ uphill: car stationary on a road with a gradient is in safe conditions (further read the paragraph
WARNING LIGHTS higher than 5%, engine running, brake pressed and "When parked" in the chapter "Starting and driving").
AND MESSAGES gearbox in neutral or gear (other than reverse)
engaged; ASR SYSTEM (AntiSlip Regulation)
IN AN EMERGENCY
❒ downhill: car stationary on a road with a gradient It is an integral part of the ESC system. It
SERVICING AND higher than 5%, engine running, brake pressed and automatically operates in the event of drive wheels
MAINTENANCE reverse gear engaged. slipping, loss of grip on wet roads (aquaplaning)
and acceleration on slippery, snowy or icy roads,
When setting off, the ESC system control unit etc…
maintains braking pressure on the wheels until the
torque required for starting is reached or, in any Depending on the slipping conditions, two different
case, for a maximum of 2 seconds so that the right control systems are activated:
foot can be moved easily from the brake pedal to the
accelerator pedal. ❒ if the slipping involves both drive wheels, the ASR
intervenes reducing the power transmitted by the
When 2 seconds have elapsed, without any engine;
departure having taken place, the system is
automatically deactivated, gradually releasing the ❒ if the slipping only involves one of the drive
braking pressure. During this release stage, a typical wheels, it intervenes automatically braking the
mechanical brake release noise can be heard, wheel that is slipping.
indicating that the car is about to move.

TECHNICAL
SPECIFICATIONS

INDEX

80

Activation/deactivation of the ASR system WARNING GETTING TO
KNOW YOUR CAR
The ASR system activates automatically each time For the correct operation of the ESC
the engine is started. and ASR systems it is vital that the tyres SAFETY
are the same make and the same type on all
Whilst driving, the ASR can be switched off and the wheels, in perfect condition and, above all, STARTING AND
subsequently switched on again by pressing the ASR the recommended type, make and size. DRIVING
OFF button fig. 67. WARNING LIGHTS
WARNING AND MESSAGES
On some versions, the intervention of the system is
indicated by a message shown on the display. When The ESC functions even when the IN AN EMERGENCY
the system is not active, the LED on the button ASR space-saver wheel is being used. Always
OFF turns on and, on some versions, a message remember that the space-saver wheel, being SERVICING AND
appears on the display. smaller than the original wheel, provides less MAINTENANCE
grip. TECHNICAL
When the ASR is deactivated whilst driving, the next SPECIFICATIONS
time the car is started the ASR is automatically WARNING
activated.
Do not take unnecessary risks, even if
When travelling on snowy roads with snow chains, it your vehicle is fitted with the ESC and
may be helpful to turn the ASR off: in fact, in these ASR systems.Your driving style must always be
conditions, slipping of the drive wheels when moving suited to the road conditions, visibility and
off makes it possible to obtain better traction. traffic.The driver is always responsible for road
safety.

fig. 67 F0W0040 INDEX

81

GETTING TO HBA SYSTEM TRACTION PLUS SYSTEM
KNOW YOUR CAR
The system, which cannot be turned off, recognises (for versions/markets, where provided)
SAFETY emergency braking (on the basis of the brake pedal
operating speed) and speeding up the response of Traction Plus is a driving aid, useful for setting off in
the braking system. The HBA is deactivated if there poor grip conditions (snow, ice, mud, etc.) which
is an ESC system failure. allows the drive force to be distributed in the best
way over the front axle when one wheel is slipping.
STARTING AND
DRIVING In effect, Traction Plus acts by braking the wheels
with poor grip (or those slipping more than the
WARNING LIGHTS others), thereby transferring the drive force to those
AND MESSAGES which have more grip on the ground.

This function can be activated manually by pressing
the button T+ close to the gear lever fig. 68 and
operates under 30 km/h. When this speed is
exceeded, it is automatically deactivated (the LED on
the button is still on) and it is reactivated again
when the speed is below 30 km/h.

IN AN EMERGENCY

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX fig. 68 F0W0309

82

Traction Plus operation START&STOP SYSTEM GETTING TO
KNOW YOUR CAR
The system is deactivated when starting. To activate (for versions/markets, where provided)
the Traction Plus system, press the T+ button fig. 68: SAFETY
the LED on the button switches on; the display INTRODUCTION
shows a dedicated message. STARTING AND
The Start&Stop system automatically stops the DRIVING
The activation of the Traction Plus system causes the engine when the car is stationary and starts it again
differential locking effect on the front axle, through when the driver wants to move off. This reduces WARNING LIGHTS
the braking system, to improve traction on irregular consumption, the emission of harmful gases and AND MESSAGES
grounds. noise pollution.

If the Traction Plus system is faulty, the ESC warning OPERATING MODES
light on the instrument panel switches on
constantly. Engine stopping mode

With the car stopped, the engine stops with gearbox
in neutral and clutch pedal released.

Restarting the engine IN AN EMERGENCY
Press the clutch pedal to restart the engine.

Note The engine can only be stopped automatically SERVICING AND
after driving at a speed of more than about 10 km/h, MAINTENANCE
to prevent the engine from being repeatedly stopped TECHNICAL
when driving at walking pace. SPECIFICATIONS

The symbol appears on the display when the
engine stops.

INDEX

83

GETTING TO MANUAL SYSTEM ACTIVATION/ ENGINE STOPPING FAILURE CONDITIONS
KNOW YOUR CAR DEACTIVATION
When the system is operating, due to comfort,
To activate/deactivate the system manually, press the emission control and safety reasons, the engine does
fig. 69 button on the dashboard control trim. not stop in some conditions, among which:

SAFETY Start&Stop system activation ❒ engine still cold;

STARTING AND When the Start&Stop system is activated, the LED ❒ especially cold outside temperature;
DRIVING above button is off.
❒ battery not sufficiently charged;
WARNING LIGHTS Start&Stop system deactivation
AND MESSAGES ❒ particulate filter regeneration (DPF) in progress
When the Start&Stop system is deactivated, the LED (diesel engines only);
above the button is on.
❒ driver's door not shut;
IN AN EMERGENCY
❒ driver's seat belt not fastened;
SERVICING AND
MAINTENANCE ❒ reverse gear engaged (for example, for parking
manoeuvres);
TECHNICAL
SPECIFICATIONS ❒ for versions equipped with automatic climate
control (for versions/markets, where provided), if
an adequate level of thermal comfort has not
been reached or with MAX-DEF activation;

❒ during the first period of use for a new car, to
initialise the system.

If climate comfort is to be favoured, the
Start&Stop system can be disabled, for
continuous operation of the climate
control system and avoidance of, for example, the
windows misting up.

INDEX fig. 69 F0W0044

84

ENGINE RESTARTING CONDITIONS SAFETY FUNCTIONS GETTING TO
KNOW YOUR CAR
For reasons of comfort, limiting harmful emissions When the engine is stopped by the Start&Stop
and safety purposes, the power unit can restart system, if the driver releases his/her seat belt and SAFETY
automatically without any action on behalf of the opens the driver's or passenger's door, the engine
driver if certain conditions are met, including: can be restarted only using the ignition key. STARTING AND
DRIVING
❒ battery not sufficiently charged; The driver is informed by a buzzer and by the WARNING LIGHTS
flashing of the symbol on the display; on some AND MESSAGES
❒ reduced braking system vacuum (e.g. if the brake versions, a message is displayed as well.
pedal is pressed repeatedly); IN AN EMERGENCY
"ENERGY SAVING" FUNCTION
❒ car moving (e.g. when driving on roads with a (for versions/markets, where provided) SERVICING AND
gradient); MAINTENANCE
If, after automatic engine restarting, the driver does TECHNICAL
❒ engine stopping by Start&Stop system for over 3 not carry out any action on the car for an extended SPECIFICATIONS
minutes; period (about 3 minutes), the Start&Stop system
stops the engine definitively, to prevent fuel INDEX
❒ for versions equipped with automatic climate consumption. In these cases, the engine can only be
control (for versions/markets where provided), to restarted using the ignition key. 85
enable suitable thermal comfort or with MAX-DEF
activation. Note In any case, it is possible to keep the engine
running by deactivating the Start&Stop system.
If a gear in engaged during stopping with Start&Stop,
the automatic restarting of the engine is only IRREGULAR OPERATION
permitted by fully depressing the clutch pedal.
In the event of malfunction, the Start&Stop system is
The driver is informed by a message on the display deactivated. The driver is informed about the fault
and - for versions/markets, where provided - by through the flashing of the symbol on the display
the flashing of the symbol. (for some versions together with the display of a
message). In this case, contact a Fiat Dealership.
If the clutch is not pressed, about 3 minutes after the
engine stops, the engine can be restarted only using
the ignition key.

In cases of undesired engine stops, due for example
to the clutch pedal being released abruptly with a
gear engaged, if the Start&Stop system is activated,
the engine can be restarted by fully depressing
the clutch pedal.

GETTING TO CAR INACTIVITY JUMP STARTING
KNOW YOUR CAR
In the event of car inactivity, special attention must When jump starting, never connect the negative lead
SAFETY be paid to the disconnection of the battery power (-) of the auxiliary battery to the negative pole A
STARTING AND supply. fig. 71 of the car battery, but rather to an
engine/gearbox earth point.
DRIVING Proceed as follows: detach the connector A fig. 70
(by pressing button B) from sensor C for monitoring
the status of the battery installed on the negative
battery pole D. This sensor should never be
disconnected from the pole except if the battery is
replaced.

WARNING LIGHTS WARNING
AND MESSAGES
When replacing the battery, always go
to a Fiat Dealership. Replace the battery
with one of the same type (HEAVY DUTY) and
with the same specifications.

IN AN EMERGENCY IMPORTANT After turning the ignition key to STOP, fig. 70 F0W0083
SERVICING AND wait at least 1 minute before disconnecting the
MAINTENANCE electrical supply to the battery.

TECHNICAL
SPECIFICATIONS

INDEX fig. 71 F0W0084

86

IMPORTANT CITY BRAKE CONTROL - GETTING TO
"Collision Mitigation" SYSTEM KNOW YOUR CAR
WARNING
(for versions/markets, where provided) SAFETY
Before opening the bonnet, make sure
that the engine is off and that the This is a driving assistance system that can detect the STARTING AND
ignition key is in the STOP position. Follow the presence of nearby cars in front of the vehicle and, DRIVING
instructions on the dedicated label on the front in case of imminent collision, intervenes WARNING LIGHTS
crossmember fig. 72.We recommend that you automatically, braking the car to prevent the impact AND MESSAGES
remove the key from the ignition if other people or mitigate its effects.
remain in the vehicle. Exit from the car only IN AN EMERGENCY
after having removed the ignition key or having The system only works if:
rotated it to the STOP position. During SERVICING AND
refuelling, make sure that the engine is off and ❒ the ignition key is in MAR-ON, MAINTENANCE
that the ignition key is in the STOP position. TECHNICAL
❒ the car speed is between 5 and 30 km/h; SPECIFICATIONS

❒ the front seat belts are fastened.

The system can be deactivated (and then reactivated)
with the display setup menu (see paragraph “Menu
items” in this chapter).

The system activates if there is risk of imminent
collision and the driver does not press the brake
pedal promptly.

Versions equipped with Start&Stop system: at
the end of the automatic braking, the Start&Stop
system will activate as described in paragraph
"Start&Stop system" of this chapter.

Versions equipped with manual gearbox: at the
end of the automatic braking the engine may stall
and turn off, unless the driver presses the clutch
pedal.

fig. 72 F0W0204 INDEX

87

GETTING TO Versions equipped with Dualogic automatic IMPORTANT
KNOW YOUR CAR transmission (for versions/markets, where
provided): at the end of braking the last gear stored WARNING
SAFETY remains engaged.
The system is an aid for the driver who
STARTING AND IMPORTANT Both on versions equipped with must never reduce attention while
DRIVING manual gearbox and on those with Dualogic driving.The responsibility always rests with the
automatic transmission (for versions/markets, where driver, who must take into account the traffic
WARNING LIGHTS provided), after the car is stopped the brake calipers conditions for driving in complete safety.The
AND MESSAGES may be stuck for about 2 seconds for safety reasons. driver must always maintain a safe distance
Make sure you press the brake pedal if the car moves from the vehicle in front.
IN AN EMERGENCY slightly forwards.
WARNING
IMPORTANT The system does NOT activate
engaging the reverse. The system does NOT activate If the driver depresses the brake pedal
if the front seat belts are not fastened. fully or carries out a fast steering during
system operation, the automatic braking
LASER SENSOR function may stop (e.g. to allow a possible
manoeuvre to avoid the obstacle).
The system includes a laser sensor, located in the
upper part of the windscreen . fig. 73

SERVICING AND The laser sensor may have limited or
MAINTENANCE absent operation due to weather
conditions such as: heavy rain, hail, thick
TECHNICAL fog, heavy snow, formation of ice layers on the
SPECIFICATIONS windscreen.

INDEX fig. 73 F0W0315

88

Sensor operation may also be Do not tamper nor operate on the laser GETTING TO
compromised by the presence of dust, sensor. Do not close the openings in the KNOW YOUR CAR
condensation, dirt or ice on the aesthetic cover located under the interior
windscreen, by traffic conditions (e.g. vehicles rear view mirror. In the event of a sensor failure, SAFETY
that are driving not aligned with you car, vehicle contact a Fiat Dealership.
driving in a transverse or opposite way on the STARTING AND
same lane, bend with a small radius of curvature), IMPORTANT If you are driving on roads close to DRIVING
by road surface conditions and by driving trees with protruding branches it is advisable to WARNING LIGHTS
conditions (e.g. off-road driving). Make sure the deactivate the system to prevent the branches at the AND MESSAGES
windscreen is always clean. Use specific height of the bonnet or the windscreen from
detergents and clean cloths to avoid scratching interfering with the system. IN AN EMERGENCY
the windscreen.The sensor operation may also be
limited or absent in some driving, traffic and Do not cover the operating range of the SERVICING AND
road surface conditions. sensor with stickers or other objects. MAINTENANCE
Also pay attention to other objects on the TECHNICAL
Projecting loads on the roof of the car bonnet (e.g. a layer of snow) and make sure they SPECIFICATIONS
may interfere with the correct operation do not interfere with the light emitted by the
of the sensor. Before starting make sure laser. INDEX
the load is correctly positioned, in order not to
cover the sensor operating range. WARNING 89

If the windscreen must be replaced due to The laser beam is not visible at the
scratches, chipping or breakage, contact naked eye. Do not look directly, or with
exclusively a Fiat Dealership. Do not optical instruments (e.g. lenses), at the laser
replace the windscreen on your own, risk of beam from a distance lower than 10 cm: this
malfunction! It is advisable to replace the may cause damage to the sight.The laser beam
windscreen if it is damaged in the laser sensor is also present when the key is at MAR-ON
area. but its operation is off, not available or
manually deactivated with the display Setup
Menu (see paragraph “Menu items” in this
chapter).

GETTING TO WARNING If a trailer or a car is towed the system
KNOW YOUR CAR must be deactivated with the display
The system intervenes on vehicles Setup Menu (see paragraph "Menu
SAFETY travelling in the same lane. Small sized items" in this chapter).
STARTING AND vehicles (e.g. bicycles or motorbikes) or people,
animals and things (e.g. pushchairs) and more in WARNING
DRIVING general all those obstacles with a low reflection
of the light emitted by the laser (e.g. vehicles If the car must be placed on a roller
soiled with mud) are not taken into bench (at a speed within 5 and 30 km/h)
consideration. for maintenance interventions or if it is washed
in an automatic roller washing tunnel with an
WARNING LIGHTS obstacle in the front part (e.g. another car, a
AND MESSAGES wall or another obstacle), the system may
detect its presence and activate. In this case the
system must be deactivated with the display
setup menu (see paragraph “Menu items”
in this chapter).

IN AN EMERGENCY

SERVICING AND
MAINTENANCE

TECHNICAL
SPECIFICATIONS

INDEX

90

EOBD SYSTEM The system also has a diagnosis connector that can GETTING TO
be interfaced to suitable instruments, to read the KNOW YOUR CAR
The EOBD system (European On Board Diagnosis) error codes stored in the control unit together with
carries out a continuous diagnosis of the a series of specific parameters for engine operation SAFETY
components of the car related to emissions. It also and diagnosis.
alerts the driver about component deterioration STARTING AND
by switching on the warning light on the instrument IMPORTANT After eliminating the failure, to check DRIVING
panel and the displaying of a relevant message (for the system completely, Fiat Dealerships run a bench
versions/markets, where provided) (see the chapter test and, if necessary, road tests which may also WARNING LIGHTS
“Warning lights and messages”). call for a long journey. AND MESSAGES

The aim of the EOBD system (European On Board
Diagnosis) is to:

❒ monitor the system efficiency;

❒ indicate an increase in emissions;

❒ indicate the need to replace damaged components.

IN AN EMERGENCY

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

INDEX

91

GETTING TO PARKING SENSORS The acoustic signal frequency:
KNOW YOUR CAR
(for versions/markets, where provided) ❒ increases as the distance between the car and the
SAFETY obstacle decreases
Parking sensors are located in the rear bumper fig. 74
STARTING AND and their function is to inform the driver, through ❒ becomes continuous when the distance between
DRIVING an intermittent buzzer, about the presence of the car and the obstacle is less than 30 cm and
obstacles behind the car. stops immediately if the distance increases
WARNING LIGHTS
AND MESSAGES ACTIVATION ❒ is constant if the distance between car and
obstacle is unchanged.
IN AN EMERGENCY The sensors are automatically activated when reverse
gear is engaged. As the obstacle behind the vehicle Detection distances
gets closer to the car, the acoustic signal becomes
more frequent. If several obstacles are detected by the sensors, only
the nearest one is considered.
ACOUSTIC SIGNAL
FAULT INDICATIONS
When reverse gear is engaged and there is an
obstacle behind the car an acoustic signal is activated Any parking sensor failures will be indicated when
which varies according to the distance of the engaging reverse by the warning light in the
obstacle from the bumper. instrument panel together with the message in the
display (for versions/markets where provided) (see
“Warning lights and messages” section).

SERVICING AND OPERATION WITH TRAILER
MAINTENANCE
Sensor operation is deactivated automatically when
TECHNICAL the trailer's electric cable plug is fitted into the
SPECIFICATIONS car's tow hook socket. The sensors are automatically
reactivated when the trailer's cable plug is removed.

INDEX fig. 74 F0W0027

92

For correct operation, sensors must always ❒ The signals sent by the sensors can also be altered GETTING TO
be clean from mud, dirt, snow or ice. Be by the presence of ultrasonic systems (e.g. KNOW YOUR CAR
careful not to scratch or damage the pneumatic brake systems or pneumatic drills) near
sensors while cleaning them. Avoid using dry, the vehicle. SAFETY
rough or hard cloths.The sensors should be
washed using clean water with the addition of car ❒ Parking assistance system performance can also be STARTING AND
shampoo if necessary.When using special influenced by the position of the sensors, for DRIVING
washing equipment such as high pressure jets or example due to a change in the ride setting WARNING LIGHTS
steam cleaning, clean the sensors very quickly (caused by wear to the shock absorbers, AND MESSAGES
keeping the jet more than 10 cm away. suspension), or by changing tyres, overloading the
car or carrying out specific tuning operations IN AN EMERGENCY
GENERAL WARNINGS that require the car to be lowered.
SERVICING AND
❒ When parking, take the utmost care over ❒ The presence of a tow hook without trailer MAINTENANCE
obstacles that may be above or under the sensors. interferes with the correct operation of the TECHNICAL
parking sensors. If a fixed tow hook is installed, the SPECIFICATIONS
❒ Objects close to the car, are not detected under sensors cannot be used. If the customer installs a
certain circumstances and could therefore cause removable tow hook, this must always be INDEX
damage to the car or be damaged. disconnected from the crossmember whenever
the trailer is not attached to prevent the activation
Some of the conditions that could affect the of the sensors.
performance of the parking system are described
below: WARNING

❒ Reduced sensor sensitivity and a reduction in the The responsibility for parking and other
parking assistance system performance could be dangerous manoeuvres always and in
due to the presence on the surface of the sensor every case lies with the driver.When making
of: ice, snow, mud, thick paint these manoeuvres, always make sure that no
people (especially children) or animals are
❒ The sensor may detect a non-existent obstacle present in your manoeuvering space.The parking
(echo interference) due to mechanical sensors serve to assist the driver, but must never
interference, for example when washing the allow his attention to lapse during potentially
vehicle, in rain, (strong wind), hail. dangerous manoeuvres, even those executed at
low speeds.

93

GETTING TO DUALDRIVE ELECTRIC POWER When the CITY function is on, the steering wheel
KNOW YOUR CAR STEERING effort is lighter and parking operations are easier:
therefore this function is particularly useful for
SAFETY This only operates with the key turned to MAR and driving in city centres.
the engine started. The steering allows the force
required at the steering wheel to be adjusted to suit WARNING
driving conditions.
It is absolutely forbidden to carry out
STARTING AND IMPORTANT When turning the ignition key quickly, any after-market operation involving
DRIVING full power steering functionality can be achieved after steering system or steering column
a few seconds. modifications (e.g.: installation of anti-theft
WARNING LIGHTS device) that could badly affect performance and
AND MESSAGES CITY FUNCTION ACTIVATION/ safety, invalidate warranty and also result in
DEACTIVATION non-compliance of the car with type approval
IN AN EMERGENCY requirements.
Press button CITY fig. 75 to activate/deactivate the
function. The activation of the function is signalled by IMPORTANT During parking manoeuvres requiring a
the word CITY on the display (in some versions it lot of steering, the steering may become harder;
is signalled by the word CITY appearing on the this is normal and is due to the intervention of the
instrument panel). system to protect the electric steering motor from
overheating, so no intervention is required. When
SERVICING AND the car is used again later on, the power steering will
MAINTENANCE work normally.

TECHNICAL
SPECIFICATIONS

INDEX fig. 75 F0W0082

94

WARNING WIRING FOR RADIO SYSTEM GETTING TO
KNOW YOUR CAR
Before starting any servicing operation, (for versions/markets, where provided)
stop the engine and remove the key SAFETY
from the ignition switch to operate the steering If no car radio was requested at the time of
lock, particularly when the wheels do not touch purchase, the car is provided with a compartment on STARTING AND
the ground. If this is not possible (for example the dashboard fig. 76. DRIVING
if the key needs to be turned to MAR or the
engine must be running), remove the main fuse STANDARD EQUIPMENT WARNING LIGHTS
that protects the electric power steering. AND MESSAGES
The system consists of:
IN AN EMERGENCY
❒ radio supply leads;

❒ radio housing;

Remove door panels to install the speakers. Have
this operation carried out at a Fiat Dealership.

The car radio must be fitted in the special
compartment A fig. 76, which can be accessed by
pressing the two retaining tabs B in the
compartment itself; power supply cables are located
in this area.

SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS

fig. 76 F0W0052 INDEX

95

GETTING TO WARNING Setup for four speakers
KNOW YOUR CAR (for versions/markets, where provided)
If you wish to have a sound system
SAFETY installed after purchasing the car, first The system consists of:
contact a Fiat Dealership whose qualified
STARTING AND personnel will give you advise about a sound ❒ two 165-mm diameter full-range speakers in the
DRIVING system that does not damage the battery front door panels;
charge. Excessive non­running consumption
WARNING LIGHTS damages the battery and may cause your ❒ two 130-mm diameter full-range speakers in rear
AND MESSAGES battery warranty to be terminated. front door panels.

IN AN EMERGENCY SETUP Setup for six speakers
(for versions/markets, where provided) (if requested as an optional, as an alternative to the
SERVICING AND basic audio level)
MAINTENANCE The system consists of:
❒ radio supply leads; The system consists of:
❒ radio housing;
❒ aerial (on car roof); ❒ two 38-mm diameter tweeters in the front pillar at
❒ according to the option requested, the setup the sides of the windscreen;

consists of four or six speakers. ❒ two 165-mm diameter mid-woofer speakers in the
front door panels;

❒ two 130-mm diameter full-range speakers in rear
front door panels.

TECHNICAL
SPECIFICATIONS

INDEX

96