Thermoplastic Tubing - Airline Hydraulics

Thermoplastic TubingMINIMUM BURST PRESSURE. PSI

Burst vs. Temperature Data

IMPOLENE TUBING

Burst Versus Temperature -IMPOLENE PY AND PP BLACK

1000

900

22,33,44,55,66, PY & PPBK

800

700

600 88PY & 88PPBK

500

400

300

200

100

0
70 150 200
TEMPERATURE (˚F),

SUGGESTED WORKING PRESSURE IS 1/4 OF BURST PRESSURE AT THE SYSTEM OPERATING TEMPERATURE

MINIMUM BURST PRESSURE. PSI Burst Versus Temperature -NYLO SEAL NT, NH, SNBK, NSRBK, AND NF TUBING

3000

NH & NSRBK (EXCEPT 88 SIZE)

2500

88NH & 88NSRBK

2000

NT & SNBK - ALL SIZES

1500

NF - ALL SIZES

1000

500

0 150 200
70 TEMPERATURE (˚F),

SUGGESTED WORKING PRESSURE IS 1/4 OF BURST PRESSURE AT THE SYSTEM OPERATING TEMPERATURE

98

Thermoplastic Tubing

Burst vs. Temperature Data

POLY-FLO TUBING

Burst Versus Temperature - POLY -FLO P, PE, PF TUBING

450

MINIMUM BURST PRESSURE. PSI 400

44 P, PE, PF

350

300

66 P, PE, PF

250

200

88 P, PE, PF

150

100

50

0 150 175
70 TEMPERATURE (˚F),

SUGGESTED WORKING PRESSURE IS 1/4 OF BURST PRESSURE AT THE SYSTEM OPERATING TEMPERATURE

PVC CLEAR TUBING

Burst Versus Temperature - PVC TUBING

250

MINIMUM BURST PRESSURE. PSI 44PVCCLR

200

66PVCCLR

150

88PVCCLR

100

50

0

70 105 135 165

TEMPERATURE (˚F),

SUGGESTED WORKING PRESSURE IS 1/4 OF BURST PRESSURE AT THE SYSTEM OPERATING TEMPERATURE

99

Thermoplastic Tubing

Poly-Flo, PE Part Tube O.D. Tube Wall Burst Working Min. Bend Weight
(NSF Approved) No. (Inches) Thickness Pressure Pressure Radius (Approx.)
at 73˚ F at 73˚ F (Inches) Per C Ft.
Linear Low Density 22PE 1/8 (Inches)
Polyethylene Tubing 532PE 5/32 (PSI) (PSI) 1/2 (Lbs.)
33PE 3/16 0.020 5/8
44PE 1/4 0.025 500 125 3/4 0.29
66PE 3/8 0.030 500 125 1 0.44
88PE 1/2 0.040 500 125 1 1/4 0.65
0.062 400 100 2 1/2 1.10
0.062 350 87 2.50
250 62 3.40

Impolene

Poly-Flo, P Black 22P 1/8 0.020 500 125 1/2 0.29
(Non-NSF Approved) 532P 5/32 0.025 500
Linear Low Density 33P 3/16 0.030 500 125 5/8 0.44
Polyethylene Tubing 44P 1/4 0.040 400
55P 5/16 0.062 600 125 3/4 0.65
POLY-FLO ® 66P 3/8 0.062 350
88P 1/2 0.062 250 100 1 1.10

150 1 1/8 1.90

87 1 1/4 2.50

62 2 1/2 3.40

Poly-Flo, PF Black 44PF 1/4 0.040 400 100 1 1.10
(Non-NSF Approved) 66PF 3/8 0.062 350
Flame Retardent Tubing 88PF 1/2 0.062 250 87 1 1/4 2.50

Linear Low Density 62 2 1/2 3.40
Polyethylene Tubing

POLY-FLO ®

Impolene, PY 22PY 1/8 0.023 900 225 1/2 0.28
(NSF Approved) 33PY 3/16 0.034 900 225 3/4 0.63
Polyallomer Tubing 44PY 1/4 0.040 900 225 1 1.10
66PY 3/8 0.062 900 225 1 1/4 2.40
Impolene 88PY 1/2 0.062 750 187 2 1/2 3.30

Impolene, PP Black 22PP 1/8 0.023 900 225 1/2 0.28
(Non-NSF Approved) 33PP 3/16 0.034 900 225 3/4 0.63
Polyallomar Tubing 44PP 1/4 0.040 900 225 1 1.10
Black 66PP 3/8 0.062 900 225 1 1/4 2.40
88PP 1/2 0.062 750 187 2 1/2 3.30
Impolene

100

Thermoplastic Tubing

APPLICATIONS PERFORMANCE DATA
Usual Service
Part Colors Construction/Conformances
No. Available and
22PE Temperature Range Resists most solvents and • Natural: ASTM D-1248,
532PE Natural chemicals. Withstands more than Type 1, Class A,
33PE Natural For pneumatic lines, instrumentation 500 hours in Igepal solution. Category 3
44PE Natural systems, water piping and limited
Natural, Blue, Red, food service. • Federal Spec: LP390C,
66PE Green, Orange, Type 1, Class L, Grade 2,
Purple, Gray, Yellow Temperature Range: Category 3
88PE Natural, Blue, Red –80˚ F to +175˚ F
Green, Orange, • Colors: ASTM D-124B,
22P Purple, Gray, Yellow Type 1, Class B,
532P Natural Category 3
33P
44P • Federal Spec: LP 370C,
55P Type 1, Class L, Grade 2,
66P Category 3

88P • Flexible Tubing

Black For pneumatic lines, instrumentation Resists most solvents and • ASTM D-1248, Type 1,
Black systems and water piping. chemicals. Withstands more Class C, Category 4
Black than 500 hours in Igepal solution.
Black Temperature Range: • Federal Spec: LP-390C,
Black –80˚ F to +175˚ F Type 3, Class L, Grade 2,
Black Category 4

Black • Flexible Tubing
• Black Tubing offers

outstanding resistance
to sunlight

44PF Black For heating control systems in Highest resistance to • Flammability characteristic:
66PF Black commercial building, chemical environmental stress cracking Maximum allowable
88PF Black conduit, data control equipment of all regular polyethylene resins. burning rate for
systems. Ideal in gas and liquid Withstands more than 500 hours PF tubing=3.9 cm/min per
conducting applications. in Igepal solution. ASTM D635

Temperature Range: • Flexible Tubing
–80˚ F to +175˚ F

22PY White For instrumentation, pneumatic and Excellent corrosion resistances. • Can be repeatedly steam
33PY White lubricant lines, hydraulic lines, It can be used with greater range stabilized.
44PY White process lines forgases, chemicals, of liquids and gases than nylon
66PY White and solvents. Ideal for use at or polyethylene. Good acid and • Not subject to environmental
88PY White higher temps. Limited food service. chemical resistance. stress cracking.

• Flexible Tubing

Temperature Range:
–20˚ F to +212˚ F

22PP Black For instrumentation, pneumatic and Excellent corrosion resistances. • Can be repeatedly steam
33PP Black lubricant lines, process lines for
44PP Black gases, chemicals and solvents. It can be used with greater range stabilized.
66PP Black Ideal for use at higher temps.
88PP Black of liquids and gases than nylon • Not subject to environmental
Temperature Range:
–20˚ F to +212˚ F or polyethylene. Withstands stress cracking.

boiling sulfuric acid, concentrated • Black tubing offers

hydrochloric acid up to the boiling outstanding resistance to

point and saline solution up to sunlight.

200˚ F. • Flexible Tubing

101

Thermoplastic Tubing

Nylo-Seal, NH & NT Part Tube O.D. Tube Wall Burst Working Min. Bend Weight
(NSF Approved) No. (Inches) Thickness Pressure Pressure Radius (Approx.)
Nylon 11 Tubing at 73˚ F at 73˚ F (Inches) Per C Ft.
22NT 1/8 (Inches)
Nylo-Seal, SN & NSR 532NT 5/32 (PSI) (PSI) 1/2 (Lbs.)
(Non-NSF Approved) 33NT 3/16 0.017 5/8
Black 44NT 1/4 0.022 1,500 375 3/4 0.26
Nylon 11 Tubing 55NT 5/16 0.024 1,500 375 1 0.44
66NT 3/8 0.033 1,500 375 1 1/2 0.60
NYLO-SEAL ® 88NT 1/2 0.040 1,500 375 1 3/4 1.00
0.048 1,500 375 2 3/8 1.50
Nylo-Seal, NF 22NH 1/8 0.062 1,500 375 2.20
(Non-NSF 33NH 3/16 1,500 375 3/8 3.20
Approved)Plasticized Tubing 44NH 1/4 0.026 5/8
Nylon 11 Tubing 66NH 3/8 0.039 2,500 625 7/8 0.37
88NH 1/2 0.050 2,500 625 1 1/2 0.81
NYLO-SEAL ® 0.075 2,500 625 2 1/2 1.40
22SN 1/8 0.075 2,500 625 3.19
532SN 5/32 2,500 625 1/2 4.50
33SN 3/16 0.017 5/8
44SN 1/4 0.022 1,500 375 3/4 0.26
55SN 5/16 0.024 1,500 375 1 0.44
66SN 3/8 0.033 1,500 375 1 1/2 0.60
88SN 1/2 0.040 1,500 375 1 3/4 1.00
0.048 1,500 375 2 3/8 1.50
22NSR 1/8 0.062 1,500 375 2.20
33NSR 3/16 1,500 375 3/8 3.20
44NSR 1/4 0.026 5/8
66NSR 3/8 0.039 2,500 625 7/8 0.37
88NSR 1/2 0.050 2,500 625 1 1/2 0.81
0.075 2,500 625 2 1/2 1.40
22NF 0.075 2,500 625 3.19
532NF 2,500 625 4.50
33NF
44NF 1/8 0.023 1,000 250 3/8 0.33
55NF 250 5/8 0.45
66NF 5/32 0.024 1,000 250 5/8 0.54
88NF 250 7/8 1.02
440NF 3/16 0.024 1,000 250 1 1/4 1.56
660NF 250 1 1/2 2.24
1/4 0.033 1,000 250 2 3.89
250 1/2 1.20
5/16 0.040 1,000 250 3/4 2.78

3/8 0.048 1,000

1/2 0.062 1,000

1/4 0.040 1,000

3/8 0.060 1,000

Polyvinyl Chloride 44PVC 1/4 0.040 200 50 1/2 1.13
(Non-NSF Approved) 66PVC
88PVC 3/8 0.062 160 40 1 3.20
PVC Tubing
1/2 0.062 140 35 2 4.50

Style C6 C602 1/8 0.023 1,000 150 3/8 0.26
Air Brake Tubing C603
SAE J844 C604 3/16 0.035 1200 150 1 0.78
DOT FMVSS 106 C605
C606 1/4 0.040 1000 150 1 1.20
HYTRON ® AIR BRAKE TUBIN C608
C610 5/16 0.040 1000 150 1 1/4 1.50
C612
3/8 0.063 1400 150 1 1/2 2.80

1/2 0.063 950 150 2 4.30

5/8 0.092 900 150 2 1/2 6.80

3/4 0.092 800 150 3 8.50

102

Thermoplastic Tubing

APPLICATIONS PERFORMANCE DATA
Usual Service
Part Colors Construction/Conformances
No. Available and
Temperature Range Resists vermin attack. • Moisture not required for
22NT Natural flexibility.
532NT Natural For instrumentation lines, lubrication
33NT Natural and process piping systems, fuel, Flexible Tubing
44NT Natural oil and refrigerant lines.
55NT Natural
66NT Natural Temperature Range:
88NT Natural –60˚ F to +212˚ F

22NH Natural For instrumentation lines, lubrication Resists vermin attack. • Moisture not required for
33NH Natural and process piping systems, fuel, flexibility.
44NH Natural oil and refrigerant lines.
66NH Natural Limited food service. • Black tubing offers
88NH Natural outstanding resistance to
Temperature Range: sunlight.
22SN Black –60˚ F to +225˚ F
532SN Black Flexible Tubing
33SN Black
44SN Black For instrumentation lines, lubrication Resists vermin attack. • Moisture not required for
55SN Black and process piping systems, fuel, flexibility.
66SN Black oil and refrigerant lines.
88SN Black • Black tubing offers
Temperature Range: outstanding resistance to
22NSR Black –60˚ F to +225˚ F sunlight.
33NSR Black
44NSR Black Flexible Tubing
66NSR Black
88NSR Black

22NF Black, Natural
532NF Black, Natural
33NF Black, Natural
44NF Black, Natural
55NF Black, Natural
66NF Black, Natural
88NF Black, Natural
440NF Black, Natural
660NF Black, Natural

44PVC Clear For pneumatic lines and water Flexible Tubing
66PVC Clear piping. Clear tubing is ideal where
88PVC Clear visual inspection of flow and
cleanliness is desired.

Temperature Range:
–20˚ F to +165˚ F

C602 Black For replacing metal air brake Material Specifications: Conformances:
C603 Black tubing on air brake systems, Tube: Nylon • DOT FMVSS 106
C604 Black, Blue, Red, except for the compressor Reinforcement: Polyester Fiber • SAE J844
Yellow, Green, discharge lines and other Cover: Nylon. Totally Bonded
C605 Brown, Orange temperature limiting locations.
C606 Black
Black, Brown, Temperature Range:
C608 Blue, Green, -40°F to +200°F
Orange, Red,
C610 Yellow
C612 Black, Blue, Red,
Green, Brown,
Yellow
Black, Blue,
Red, Green,
Black

103