ecoWARE Carpenter Version (no update)

20

Hawa Frontino 20 H FS

4

Hawa Frontino 20 H FS

Flächenbündige Designvarianten – Kein Türversatz, Hoher Bedienungskomfort – Ergonomische Öffnungsform, Moderne Küchenwelten – Obenlaufende Anwendungen

grifflos oder freie Anordnung der Griffe 100 % Türöffnung ohne Nut im Boden
Flush design – Sliding solution without door offset, without handles Extremely convenient operation – Ergonomic opening design, Modern kitchen environment – Top running applications without a
or flexible handle arrangement 100 % door opening groove in the floor
Design affleurant – Solution coulissante sans retrait de la porte, Grand confort d’utilisation – Forme d’ouverture ergonomique, Monde moderne de la cuisine – Applications avec roulement en haut
sans poignées ou libre disposition des poignées ouverture de la porte à 100 % sans rainure dans le sol

Effizienz und Wirtschaftlichkeit – Minimale Montagezeit Einfachheit – Türjustierung an einer Komponente Schlankes Sortiment – Ein Beschlagssystem für
Simplicity – Door adjustment using a single component
dank vormontierter Lauftechnik, keine Korpusbearbeitung Simplicité – Ajustement de la porte sur un seul composant oben- oder untenlaufende Anwendungen
Efficient and cost-effective – Minimal installation time thanks to the Multi-faceted product range – One hardware system for top
pre-mounted running system, no cabinet processing required and bottom running applications
Efficacité et rentabilité – Temps de montage minimal dû au système Gamme restreinte – Un système de ferrures pourapplications
de roulement prémonté, aucun usinage du corps de meuble avec roulement en bas ou en haut

www.ecoware.com.my Wardrobe & Cabinet Door Hardware 8.39

20 H FS ul

System: Lauf- und Führungsschiene aufgeschraubt,
untenlaufend, ohne Korpusbearbeitung, für zwei
Holz türen bis 20 kg. Design Flächenbündig/Forslide

System: Running and guide track screwed on, bottom running,
without cabinet modification, for two wooden doors up to 20 kg.
Flush design/Forslide

Système: rails de roulement et de guidage vissés, à roulement
en bas, aucune préparation nécessaire le corps de meuble,
pour deux portes en bois jusquà 20 kg. Design affleurant/Forslide

m12ax0.0 mm Abkürzungen/ Abbrevations/Abrévations Einbaugrössen/ Installationdimensions/ E D
max. Dimensions de montage mm mm
20kg max. 1000 mm TH Türhöhe Door height Hauteur de porte Typ S1 = KAM 1 200 –1399 mm
Largeur de porte Typ S2 = KAM 1 400 –1599 mm 231 97
19 – 25 mm TB Türbreite Door width Position guidage Typ S3 = KAM 1 600 –1799 mm 281 147
W Position Führung Guide position Hauteur guidage Typ S4 = KAM 1 800 – 1999 mm 331 197
Perçage fixation Typ S5 = KAM 2 000 – 2199 mm 381 247
HF Höhe Führung Height of guide de la face Typ S6 = KAM 2 200 – 2400 mm 431 297
Position came 481 347
X Bohrung Drill hole front de commande Übersicht/ Overview/Synopsis: 12
Frontbefestigung fixing

KP Position Position
Steuerkurve radial cam

Übersicht/ Overview/Visione d’insieme Garnituren /Sets/Garnitures

2 Türen Typ S1 = KAM 1200 SW 053.3390.071 Typ S4 = KAM 1800 – 1 999 mm 053.3390.074
Doors Typ S2 = KAM 1400 –1399 mm 053.3390.072 Typ S5 = KAM 2000 – 2199 mm 053.3390.075
Portes Typ S3 = KAM 1600 –1599 mm 053.3390.073
1– 799 mm Typ S6 = KAM 2=200 – 2400 mm 053.3390.076

20 27 32

053.3390.071 KAM 1200 – 1399 mm Typ S1 • • 1x 1x 23.5 x 14.5 mm
053.3390.072 KAM 1400 – 1599 mm Typ S2 • •
053.3390.073 KAM 1600 – 1799 mm Typ S3 • • 16 53 64 Ø 4.5 x 30 Ø 3.5 x 16
053.3390.074 KAM 1800 – 1999 mm Typ S4 • •
053.3390.075 KAM 2000 – 2199 mm Typ S5 • • 2x 1x 1x 14 x Anschlagpuffer 8x 2x 1D6F.5Sx 23.5 mm
053.3390.076 KAM 2200 – 2400 mm Typ S6 • • 053.0316.001
27.07.2015 105012-31-K
Frontanbindung neutral Frontanbindung links Frontanbindung rechts kpl. ProfilKlemmKlotz 2x Material: Aluminium 053.3379.000TH = max. 1000 75
31.07.2015 104925-341-K 053.0368.001 HF = H + 23
27.07.2015 104990-12-K 27.07.2015 104990-11-K 827.07.2015 104990-10-K Blende Frontanbindung 10 34
Material: Zamak/Stahl 053.3378.073 Material: Zamak/Stahl 053.3378.072 Material: PA
Material: Zamak/Stahl 053.3378.071 30.07.2015 104791-4-K
1x 1x A 1x Material: Aluminium 053.3381.000
SW - A + 8
58.5 x 15.5 mm
1x
Blende
Steuerschablone FWL Komplett links
31.07.2015 105011-8-K 1010 Frontino 20
053.0378.001 (35) (25) 053.3380.072
Material: PA 41 19 16.09.2016 105008-91-K
Material: Stahl/PA
Steuerschablone
31.07.2015 105011-8-K
053.0378.001
Material: PA

Einbaubeispiele/ Mounting examples/Exemples de montage = = 45°

27 W = TB + A - SW - 54 D FWL Komplett rechts TB = KAM - (A+2)
2
053.3380.071

Ø 3.5 x 16 16.09.2016 105008-9-K Ø 3.5 x 16
Ø 6,3 x 16 Material: Stahl/PA

45 70 8 C 45
B B
50 Ø 4.5 x 30 KIM - MW - 271
2
Ø 8 x 11 DFS =

Ø 5 x 14 Ø 6,3 x 16

TH = H + 60 + C – B H = KH - SH - C TH = H + 60 + C – B MW
TH = max. 1000
207
HF = H + 23 101

101 Ø 8 x 11 Ø 4 x 20 Ø 4 x 20 22
Ø 4 x 20 22 Ø 5 x 14 19 5
ø 4 x 20 ø 4 x 20
19 5

Ø 5 x 14 SH = min. 100
19
min. 58 D 58 X = TB + 9 min.
40 2 40

10 34

Ø 6,3 x 16 TB = KAM - (A+2) TBL2=7T02BØ 6,3 x 16
2
2 19 2 19

Bearbeitung = rote Zahlen /Preparation = red numbers/Préparation = numéros en rouge KAM
MW
SW E

8.40 Wardrobe & Cabinet Door Hardware www.ecoware.com.my

==(3 (5)3(5)2 (5)25) (35) TB == KKAA22MM -- ((AA++22)) == 45° 2BMOOMB7eeeeppssiittttlliillmmhheeuuaaaarrnnlleeeeddllppGGeeoorrppssiiffiioottffiippssooiioottnniissooiippttnniioooouunnrr llaa ppooiiggnnééeeW = TB + A - SW - 54
TB Ø 3.5 x 16
50 20 H FS ul
50 C 45 70 8
B
SW DDFFSS == KKIIMM -- MMØ22WW4--.522x773110 DDFFSS == KKIIMM -- MM22WW -- 227711 50
= =
A SW = = Ø 8 x 11

20 27 32 Ø 6,3 x 16 Ø 5 x 14
20 27 32 KKIIMM
H = KH - SH - C TH = H + 60 + C – B KKHH==mamx.ax1.0140040
1616 5353 6464 MW TH = max. 1000
MW HF = H + 23
1818
Ø 4.5 x 30 Ø 3.5 x 16 1010Ø 4.5 x 30
Ø 4.5 x 30 Ø 3.5 x 16 99Ø 4.5 x 30

8 Ø 4 x 20 7575207 22 Ø 8 x 11
A 8SW - A + 8 101 19 5 Ø 5 x 14
A SW - A + 8
Ø 4 x 20

SH = min. 100 19 ø 4 x 20 Ø 5 x 14

41411919 min. 10 34 58 D 58 X = TB + 9
40 2
45°
TTBBLL ====TT22BB = Ø 6,3 x 1645° Optimale Griffposition TB = KAM - (A+2)
=270 OBepstimhaanledlGe rpifofpsiotisoitnion 2
EE TB = KAM - (A+2) 2 19
TB = KA2M - (A+2) BMeesitllheuarnedlpeopsiotisoitniopnour la poignée
Meilleure position pour la poignée
2 KAM
KAM
B SW KIM - MW - 271 MW KIM - MW - 271 SW
KIM - M2W - 271 MW KIM - M2W - 271 SW
50 SW
50 DFS = 2 DFS = 2
DFS = DFS =

Settyp / Setgrösse Breite Distanzmass MW
Frontanbindung
Lauftechnik 4
KIM D
KIM E mm mm KHKH= =maxm.ax1.0140040 *
2
XXS 1200-1399 MW 231 97 A
MW 281 147 A
XS 1400-1599 197
331 247
S 1600-1799 381 297
431 347
M 1800-1999 44 481 =

SW L 2000-2199 7575 *
A 5656 1919
A XL 2200-24ØØ0044 xx 2200
=
20 27 32
TTBB ==KKAA22MM -- ((AA++22))

C Ø 4.5 x 30 16 53 64 KAM Ø 4.5 x 30
KAM

TBL ==TT22BB Ø 3.5 x 16 øø 44 xx 2200 MW
TBL MW

9900 KAM 9900 18
KAM 10

9

8 E 75
E
A SW SW - A + 8 uSSnaptvaeerretnimSeieaZ>ned>itm>uonndeGy e-ldPla- nPnlainKKngPPunt==ogoTTs22BBtloao--tl116688MMWW KKPP ==TT22BB -- 116688 SW
SW SW

>>>

(35) (25) Elle économiser temps et argent - L'outil de planification en
41 19
ligne entre >>>

= = 45° Gez./Verf: 07.10.2015/SEL
Wilerstrasse -
EKU-FRONTINO 20 FS UL Optimale Griffposition Rev./Verf:
BBLL T==BKKE22II=MMKUKA2AMG,-S(cAh+ie2b)elösungen, Sirnach, Switzerland, ØØ 44 xx 2200 Best handle position la poignée
(0)71 96 Meilleure position pour

90, 8370 Tel. +41 96 100

A50 Fax +41 (0)71 96 96 110, [email protected], www.eku.ch Certified ISO 9001 - Member of HAW A Group

DFS = KIM - MW - 271 DFS = KIM - MW - 271
2 2

A Ø 4 x 20 7575 4 A
A Ø 4 x 20 5656 1919 4 A
KH = max. 1040
KIM TB ==KKAA22MM - (A+2)
TB - (A+2)

MW

KAM
KAM

ø 4 x 20 MW
ø 4 x 20 MW

90 90
90 90

BC KP ==TT22BB - 168 KP ==TT22BB - 168
KP - 168 KP - 168

TBL =T2B D

Garnituren BL ==KK22IIMM12 KAM Ø 4 x 20
MW Ø 4 x 20
/Sets/Garnitures:BL

SW E SW

www.ecoware.com.my Wardrobe & Cabinet Door Hardware 8.41

20 H FS ol

System: Lauf- und Führungsschiene aufgeschraubt,
obenlaufend, ohne Korpusbearbeitung, für zwei
Holz türen bis 20 kg. Design Flächenbündig/Forslide

System: Running and guide track screwed on, top running,
without cabinet modification, for two wooden doors up to 20 kg.
Flush design/Forslide

Système: rails de roulement et de guidage vissés, à roulement
en haut, aucune préparation nécessaire le corps de meuble,
pour deux portes en bois jusquà 20 kg. Design affleurant/Forslide

m12ax0.0 mm Abkürzungen/ Abbrevations/Abrévations Einbaugrössen/ Installationdimensions/ E D
max. Dimensions de montage KAM mm mm
20kg TH Türhöhe Door height Hauteur de porte
max. 1000 mm Largeur de porte Typ S1 Ø 4 x 2=0 KAM 1 20Ø04 x–210399 mm MW 231 97
19 – 25 mm TB Türbreite Door width Position guidage Typ S2 = KAM 1 400 –1599 mm 281 147
Hauteur guidage
W Position Führung Guide position Perçage fixation Typ S3 = KAM 1 600 –1799 mm 331 197
de la face Typ S4 90 90
HF Höhe Führung Height of guide Position came Typ S5
de commande = KAM 1 800 – 1999 mm 381 247
X Bohrung Drill hole front = KAM 2 000 – 219K9P =mT2Bm-168 K4P3=1T2B -168297
Frontbefestigung fixing
Typ S6 = KAM 2 200 – 2400 mm 481 347

KP Position Position Übersicht/ Overview/Synopsis: 12
Steuerkurve radial cam

Übersicht/ Overview/Visione d’insieme Garnituren /Sets/GarnituresBL =K2IM

2 Türen Typ S1 = KAM 1200 1– 399 mm 053.3390.071 Typ S4 = KAM 1800 – 1 999 mm 053.3390.074
Doors Typ S2 = KAM 1400 1– 599 mm 053.3390.072 Typ S5 = KAM 2000 – 2199 mm 053.3390.075
Portes Typ S3 = KAM 1600 –1799 mm 053.3390.073 Typ S6 = KAMKA2M200 – 2400 mm 053.3390.076

E Ø 4 x 20 MW

053.3390.071 KAM 1200 – 1399 mm Typ S1 • • 1x 1x 23.5 x 14.5 mm
053.3390.072 KAM 1400 – 1599 mm Typ S2 • •
053.3390.073 KAM 1600 – 1799 mm Typ S3 • • 2x 1x 1x 14 x Anschlagpuffer 8x 2x 1D6F.5Sx 23.5 mm
053.3390.074 KAM 1800 – 1999 mm Typ S4 • • 053.0316.001
053.3390.075 KAM 2000 – 2199 mm Typ S5 • • Frontanbindung rechts kpl. ProfilKlemmKlotz Ø 4 x 20
053.3390.076 KAM 2200 – 2400 mm Typ S6 • • 60 min. 40 31.07.2015 104925-341-K 053.0368.001 27.07.2015 105012-31-K 053.3379.000
27.07.2015 104990-10-K 19 2x
Material: Zamak/Stahl 053.3378.071 Material: PA 19 Material: Aluminium

Frontanbindung neutral Frontanbindung links 1x 1x Blende Frontanbindung

27.07.2015 104990-12-K 27.07.2015 104990-11-K 30.07.2015 104791-4-K
Material: Zamak/Stahl 053.3378.073 Material: Zamak/Stahl 053.3378.072
5Material: Aluminium 053.3381.000
1x 1x
58.5 x 15.5 mm

A Steuerschablone Ø 4 x FWL Komplett links 754.5 x 304 109 22 Blende
31.07.2015 105011-8-K 56 19
053.0378.001 20 19mm = Ø053.3380.072 1010 Frontino 20
Material: PA

Einbaubeispiele/ Mounting examples/Exemples de montage Steuerschablone H 25mm = Ø 4.5 x 3516.09.2016 105008-91-K

Material: Stahl/PA

31.07.2015 105011-8-K 053.0378.001

Material: PA 263

TB =KA2M - (A+2) D TBL =T2B DFWL Komplett rechts TB = - (A+2)
Ø 4 x 20 053.3380.071 Ø 6,3 x 16
X = TB + 9 60 min. 40 60 min. 40
58 D 58 2 16.09.2016 105008-9-K
Material: Stahl/PA

34 10 19

VS + 10 70 5

Ø 5 x 14 Ø 5 x 14
Ø 8 x 11
19 19

Ø 4 x 20 19mm = Ø 4.5 x 30 109 22 Ø 4 x 20 Ø 4 x 20 22
25mm = Ø 4.5 x 35 263 101

H 263

TH = max. 1000 Ø 6,3 x 16 TB =KA2M - (A+2)
HF = H + C + 97 60 min. 40 H = KH - VS - C - 60 58
34 10 58 D TH = KH
MW Ø 5 x 14
19

19 Ø 5 x 14

Ø 4 x 20 Ø 4 x 20 22 KIM
263 101 Ø 8 x 11

Ø 8 x 11 Ø 4.5 x 30 Ø 3.5 x 16

50

Ø 5 x 14 H = KH - VS - C - 60 VS =
min 50 C
TH = KH
TH = max. 1000
HF = H + C + 97
27 W = TB + A - SW - 54 SW DFS = KIM - 270
19 Ø 6,3 x 16
Bearbeitung = rote Zahlen /Preparation = red numbers/Préparation = numéros en rouge
=
8.42 Wardrobe & Cabinet Door Hardware
www.ecoware.com.my

50 27 W = TB + A - SW - 54
50 Ø 3.5 x 16
Ø 5 x 14 20 H FS olØ 8 x11 50
C DFS = KIM - 270 45 = 70 8
DFS = KIM - 270 B =
Ø 4.5 x 30 Ø 6,3 x 16

SW =
=
A SW
H = KH - SH - C TH = H + 60 + C – B TH = max. 1000
20 27 32 HF = H + 23
20 27 32 18 18
1010
KAM 99

1616 5353 6464 Ø 4 x 20 MW
Ø 4.5 x 30
Ø 4.5 x 30 Ø 4 x 20 Ø 4.5 x 30
Ø 3.5 x 16 Ø 4.5 x 30
Ø 3.5 x 16 Ø 8 x 11

20790 101 90 Ø 5 x 14

8 Ø 4 x 20KP =T2BØ-416x 8207575 22 =T2B -168
A 8SW - A + 8 19KP5
A SW - A + 8 ø 4 x 20
SH = min. 100 19 Ø 5 x 14

(3 (5)3(52) (5)25) min. 10 34 58 D 58 X = TB + 9
41411919 40 2

= BL =TTKBB2IM==KKAA22MM = Ø 6,3 x 16 45° Optimale Griffposition TB = KAM - (A+2)
= 45° OBepstimhaanledlGe rpifofpsiotisoitnion 2
= 270 2 19
- (A+2)
- (A+2) BMeesitllheuarnedlpeopsiotisoitniopnour la poignée
Meilleure position pour la poignée

KAM

B E Ø 4 x 20 Ø 4 x 20 MMWW SW
Ø 4 x 20
A
90 90 MW
C KP =T2B -168 Breite
Settyp / Setgrösse LauKftPec=hTnE2Bikm-1m68 Distanzmass
Frontanbindung
mm
D
75
XXS 1200-1399 56 19 231 97 4
XS 1400-1599 281 147
S 1600-1799 2331197 *
M 1800-1999 381 247
L 2000-2199 431 297 A
BL =K2IM XL 2200-2400 4 481 347 SW

E Ø 4 x 20 * TB =KA2M - (A+2)
Ø 4 x 20
TBL =T2B KAM

Ø 4 x 20 MW

KAM

MW

90 90

Sparen Sie Zeit und Geld - PlanKuPn=gsT2tBoo-l168 KP =T2B -168

uSnatveer time a>nd>m>oney - Planning tool at >>>

Elle économiser temps et argent - L'outil de planification en

ligne entre >>> 75 KH = max. 1000
56 19
A 4 A 07.10.2015/SEL
Gez./Verf: -
BC EKU-FRONTINO 20 FS UL Rev./Verf:

50 BL =K2IM MW (T0B)7=1 K9A26M96-
EKU 8370
TBL =T2B AG, Schiebelösungen, Wilerstrasse 90, Sirnach, Switzerland, Tel. +41 1(A0+0 2)

E Fax +41 (0)71 96 96 110, [email protected], wKwAwM.eKkIuM.ch Certified ISO 9001 - Member of HAW A Group
DMW SW
Ø 4 x 20

SW DFS = KIM - 270

= MW = 18
Ø 3.5 x 16 4 10
20 27 32 75 9 A
A 56 19 KIM
KH = max. 1000
16 53 64 Ø 4.5 x 30 DFS = KIM - 270 TB =KA2M - (A+2) Ø 4.5 x 30
45°
TBL =T2B

50 75
8

AA SW - A + 8

(35) (25) SW
41 19
Garnituren /Sets/Garnitures: 1=2 =
= Optimale Griffposition
= TB =KA2M - (A+2) Best handle position
Meilleure position pour la poignée
20 27 32 = max. 1000
Wardrobe & Cabinet Door Hardware
www.ecoware.com.my 8.43

20 H OS FS

System: Lauf- und Führungsschiene aufgeschraubt, oben-

laufend, ohne Korpusbearbeitung, ohne Blenden, für

zwei Holz türen bis 20 kg. Design Flächenbündig/Forslide

System: Running and guide track screwed on, top running,
without cabinet modification, without panels, for two wooden doors
up to 20 kg. Flush design/Forslide

Système: rails de roulement et de guidage vissés, à roulement en haut,
aucune préparation nécessaire le corps de meuble, sans caches,
pour deux portes en bois jusquà 20 kg. Design affleurant/Forslide

m12ax0.0 mm Abkürzungen/ Abbrevations/Abrévations Einbaugrössen/ Installationdimensions/ E D
max. Dimensions de montage mm mm
20kg TH Türhöhe Door height Hauteur de porte
max. 1000 mm Largeur de porte Typ OS1 = KAM 1 200 –1399 mm KAM 231 97
19 – 25 mm TB Türbreite Door width Perçage fixation Ø 4 x 20 MW 147
de la face Ø 4 x 20 KAM 1 400 –1599 mm 281
Position came
de commande Typ OS2 =

X Bohrung Drill hole front Typ OS3 = KAM 1 600 –1799 mm 331 197
Frontbefestigung fixing
Typ OS4 = KAM 1 800 – 1999 mm90 38901 247
Position
KP Position radial cam Typ OS5 = KAM 2 000 – 2199 mm 431 297
Steuerkurve Typ OS6 =
KP = X-177 KP = X-177

KAM 2 200 – 2400 mm 481 347

Übersicht/ Overview/Synopsis: 13

Übersicht/ Overview/Visione d’insieme Garnituren /Sets/Garnitures

053.3389.071 KAM 1200 – 1399 mm Einbau OLI (ObenlaufendLInks)
053.3389.072 KAM 1400 – 1599 mm
053.3389.073 KAM 1600 – 1799 mm 2 BL =KIMTüren Typ OS1 = KAM 1200 1– 399 mm 053.3389.071 Typ OS4 = KAM 1800 – 1 999 mm 053.3389.074
053.3389.074 KAM 1800 – 1999 mm 2Doors mm 053.3389.072 Typ OS5 = KAM 2000 – 2199 mm 053.3389.075
053.3389.075 KAM 2000 – 2199 mm mm 053.3389.073 Typ OS6 = KAM 2200 – 2400 mm 053.3389.076
053.3389.076 KAM 2200 – 2400 mm Portes
Typ OS2 = KAM 1400 1– 599 Einbau ORE (ObenlaufendREchts)
Typ OS3 = KAM 1600 1– 799

KAM (C) Siehe Scann (Blatt Katalog mit Farben)
KIM
SW

E Ø 41xx 20 Ø 4 x12x 0 MW Anschlagpuffer 8x 2x 8 x 25 mm
053.0316.001
(D) Siehe Scann (Blatt Katalog mit Farben)
Typ OS1 • Einbau OLI (ObenlaufendLInks)
Typ OS2 •
Typ OS3 • 4x 2 x 4 x Einbau ORE (ObenlaufendREchts) 14 x (C) 1 xSiehe Scann (Blatt Katalog mit Farben) 2x 58.5 x 15.5 mm
Typ OS4 •
Typ OS5 • D ProfilKlemmKlotz 19 Blende
Typ OS6 • 19
31.07.2015 104925-341-K 053.0368.001 1010 Frontino 20

80 min. 40 8080 minm.in4.040 (D) Material: PA
Siehe Scann (Blatt Katalog mit Farben)

19

Ø 4 x 20 Ø 4 x 20
Ø 4 x 20

A H HH 19 mm = 1ØØ1299544mmm..55mmmxx==3=305ØØØ444.5..55xxx33300510975 22 109 22
19 191925 mm = 56 109 242

19
Einbaubeispiele/ Mounting examples/Exemples de montage 25 mm = 2Ø634.5 x 35263 52
263

TB = KAM - (A+2) TB =KAM - (A+2)
2
D
58 D 58 X = TB-(MW/2) -15.5 80 min. 40 8080 min.min4.040 Ø 4.5 x 25Ø 4.5 x 25
29 29 2 22 1919 Ø 4.5 x 25
2
29 29
34 30
47 10
90
Ø 3 x 10 Ø 3 x 10 19
Ø 25 x 10 82
Ø 8 x 11 76 12 Ø 4 x 20 Ø 4 x 1201 22 101 22
7676 1 21 2 Ø 4 x 20 ØØ44xx2262030Ø 4 x 20 101 22
263
263

TH = max. 1000 H = KH - C - 80 19 MW 19 TH = KH
H H= K=HK-H -C -C8-080 19 THTH= K=HKH

KIM TH = max. 1000
THTH= =maxm.ax1.0100000

EFS = TB - ( SW - A + 8 ) - 35 35 Ø 5x12 Ø 5x12 ø 6,2 x 13,5
49 Ø 5x4129
49

Ø 8 x 11 15
50
Ø 3,5 x 16Ø 3,5 x 16
Ø 3,5 x 16

CC
CC C

C

8.44 SW Breite Breite wwDiwstan.zemcaDssiostawnzmaasrse.com.my

WBaeardrbreoitubnge=&rotCe Zaabhliennet /DPreopaorartioHn a=rrdedwnuamrbeers/Préparation = numéros en rouge

80 min. 40 19 KH = max. 1000 mm

35 Ø 4 x 20 ø 6,2 x 13,5

A SW 82 H 19 mm = Ø 4.5 x 30 109 22 20 H OS FS
(35) (25) 19 25 mm = Ø 4.5 x 35
A 41 19
263
B SW
TB = KAM - (A+2)
A 2
SW
Ø 4.5 x 2580 min. 40 SW58 D 58 X =TB-(MW/2)
C 2 29 29 2

A 34 30 29 29
47
B C35 SW = =
Ø 4 x 20
19 Ø 3 x 10 Ø 3 x 10
Ø 25 x 10
Ø 6,2 x 13,5 Ø 4 x 20 101 22 Ø 8 x 11

Ø 3,5 x 16 Ø 4 x 20 263
Ø 4 x 20 KAM

MW

75 4 TH = KH A
H = KH - C -5680 52 TH = max. 1000
90 90 19
19 KP = X-177 KP = X-177 TB =KA2M - (A+2)

Ø 5x12 EFS = TB - ( SW - A + 8 ) - 35
Ø 8 x11
49 45°

= 76 12 = Optimale Griffposition
TB =BKLA2=MK2IM- (A+2) Best handle position
Ø 3,5 x 16 Meilleure position pour la poignée

CC SW 10
KKAAMM
Ø 4 x 20 Ø 4 x 20 MKIWM

E Ø 4 x 20 Ø 4 x 20 MW

Settyp / Setgrösse 90 Breit9e0 Distanzmass MW
KP = X-177 Lauftechnik Frontanbindung
mm
KP = XE-1m77m D

OS1 1200-1399 231 97 2
OS2 1400-1599 281 147
BL =K2IM OS3 1600-1799 331 197 4
OS4 1800-1999 381 247
OS5 2000-2199 431 297 *
OS6 2200-2400 481 347

75 KAM4 A
56 SW

19
52 KIM
Sparen Sie Zeit und Geld - Planungstool
*E
uSanvtertime a>n>d>moneyØ- P4laxn2n0ingØtoo4lxat20 MW >>>
TB =KA2M - (A+2)
ligne entre >>>

Ø 4 x 20 EKU-FRONTINO 20 KAM FS OL Gez./Verf: 30.11.2015/VBA
Ø 4 x 20 MW Rev./Verf: -

EKU AG, Schiebelösungen, Wilerstrasse 90, 8370 Sirnach, Switzerland, Tel. +41 (0)71 96 96 100
90 90

KP = X-177 KP = X-177

75 4 A KH = max. 1000 mm
56 52 SW

19

MW

BL =K2IM KIM TB =KA2M - (A+2)

E KAM D
KIM
ø 6,2 x 13,5
Ø 4 x 20 MW
Ø 4 x 20

SW 82 82 = MW SW KH = max. 1000 mm
(35) (25) KIM
A 41 19 =
35 75 4 A
56 ø 6,2 x 13,5
A
19
A Ø 6,2 x 13,5 52
Ø 3,5 x 16

75 4 TB =KA2M - (A+2) A
56 52 TB =KA2M - (A+2) SW

19

SW

Garnituren /Sets/Garnitures: 13

= = 45° = Optimale Griffposition
KAM =
www.ecoware.com.my Wardrobe & Cabinet Door Hardware
8.45

decoration
hardware

DH-1.1 DH-2.1

SCREW COVER SCREW CAP * All Measure in (mm)

Model Code Material Finish Size I (mm) Size II (mm) Model Code Material Finish Size of Screw I
DH-1.1.1 SW25-12BSN Stainless Steel Satin Brush 12 3.65 DH-2.1.1 GS-SW1072024BSN Stainless Steel Polished Chrome 24
DH-1.1.2 SW25-16BSN Stainless Steel Satin Brush 5 DH-2.1.2 GS-SW1072031BSN Stainless Steel Polished Chrome 31
DH-1.1.3 SW25-19BSN Stainless Steel Satin Brush 16.55 5 DH-2.1.3 GS-SW1072046BSN Stainless Steel Polished Chrome 46
DH-1.1.4 SW25-22BSN Stainless Steel Satin Brush 19.55 5
DH-1.1.5 SW25-25BSN Stainless Steel Satin Brush 22.60 5
DH-1.1.6 SW25-30BSN Stainless Steel Satin Brush 25.40 5.50
DH-1.1.7 SW25-40BSN Stainless Steel Satin Brush 30.80 5.80
DH-1.1.8 SW25-50BSN Stainless Steel Satin Brush 6.85
40
49.70

DH-2.2

GLASS SPACER Demonstration Video

Model Code Material Finish Size I (mm) Size II (mm) Size III (mm)
DH-2.2.1 SW1061225-BSN Stainless Steel Satin Brush 12 27.80 8
DH-2.2.2 SW1061250-BSN Stainless Steel Satin Brush 12 53 8
DH-2.2.3 SW1061925-BSN Stainless Steel Satin Brush 27.35 10
DH-2.2.4 SW1061930-BSN Stainless Steel Satin Brush 18.90 32.60 10
DH-2.2.5 SW1061950-BSN Stainless Steel Satin Brush 18.90 52.10 10
DH-2.2.6 SW1061970-BSN Stainless Steel Satin Brush 18.90 72.40 10
DH-2.2.7 SW10619100-BSN Stainless Steel Satin Brush 18.80 102.80 10
DH-2.2.8 SW10619150-BSN Stainless Steel Satin Brush 18.90 151.50 10
DH-2.2.9 SW10619200-BSN Stainless Steel Satin Brush 201 10
DH-2.2.10 SW10619250-BSN Stainless Steel Satin Brush 19 252.30 10
DH-2.2.11 SW1062525-BSN Stainless Steel Satin Brush 18.90 27.50 10
DH-2.2.12 SW1062530-BSN Stainless Steel Satin Brush 18.90 31.70 10
DH-2.2.13 SW1062550-BSN Stainless Steel Satin Brush 24.80 52.85 10
DH-2.2.14 SW1062570-BSN Stainless Steel Satin Brush 24.80 71.45 10
DH-2.2.15 SW10625100-BSN Stainless Steel Satin Brush 24.80 101.40 10
DH-2.2.16 SW10625150-BSN Stainless Steel Satin Brush 152.20 10
DH-2.2.17 SW10625200-BSN Stainless Steel Satin Brush 25 202 10
DH-2.2.18 SW10625250-BSN Stainless Steel Satin Brush 25 251 10
DH-2.2.19 SW1063025-BSN Stainless Steel Satin Brush 25 28 10
DH-2.2.20 SW1063050-BSN Stainless Steel Satin Brush 24.80 53.70 10
DH-2.2.21 SW1063070-BSN Stainless Steel Satin Brush 25.10 72.95 10
DH-2.2.22 SW10630100-BSN Stainless Steel Satin Brush 30.15 102.35 10
DH-2.2.23 SW10630150-BSN Stainless Steel Satin Brush 30 152 10
30.10
30
30

www.ecoware.com.my Decoration Hardware 9.1

DH-3.1 FURNITURE DECORATION STICKER

NOBLE WHITE PIGEON WHITE BEIGE WHITE LIGHT GREY
STK-SC-01 STK-SC-02 STK-SC-03 STK-SC-06 STK-SC-07

12MM, 15MM, 18MM 15MM 15MM 15MM 12MM, 15MM, 18MM

DARK GREY BLACK WENGE WALNUT BARLILA FINELIENE BROWN HAZENUT
STK-SC-09 STK-SC-10 STK-WC-13 STK-WC-19 STK-WC-32

15MM 12MM, 15MM, 18MM 15MM 15MM 15MM

MONGOLIA BEECH CONGO PINE RIMBA WEIGE WILD ZEBRANO SPLENDOR CHERRY
STK-WC-36 STK-WC-41 STK-SC-42 STK-SC-43 STK-WC-50

15MM 15MM 15MM 15MM 15MM

SENZBRONO NATURAL MAPLE SAPELI WALNUT MAJETSTICE BEECH MANILA MAPLE I
STK-WC-58 STK-WC-63 STK-WC-72 STK-WC-75 STK-WC-80
Size II (mm) : 1.0
15MM 15MM 15MM 15MM 15MM Material : PVC

SIZE: 12mm SIZE: 15mm SIZE: 18mm Colour II
PACKING: 70pcs/card, PACKING: 48pcs/card, PACKING: 35pcs/card, Noble White
10card/pkt, 25pkt/ctn 10card/pkt, 25pkt/ctn 10card/pkt, 25pkt/ctn Noble White Size I (mm)
Noble White 12
DECORATION STICKER Code Pigeon White 15
STK-SC-01-12MM 18
Model STK-SC-01-15MM Beige 15
DH-3.1.1.1 STK-SC-01-18MM White 15
DH-3.1.1.2 STK-SC-02-15MM Light Grey 15
DH-3.1.1.3 STK-SC-03-15MM Light Grey 12
DH-3.1.2.1 STK-SC-06-15MM Light Grey 15
DH-3.1.3.1 STK-SC-07-12MM Dark Grey 18
DH-3.1.4.1 STK-SC-07-15MM Black 15
DH-3.1.5.1 STK-SC-07-18MM Black 12
DH-3.1.5.2 STK-SC-09-15MM Black 15
DH-3.1.5.3 STK-SC-10-12MM Wenge Walnut 18
DH-3.1.6.1 STK-SC-10-15MM Barlila Fineline 15
DH-3.1.7.1 STK-SC-10-18MM Brown Hazenut 15
DH-3.1.7.2 STK-WC-13-15MM Mongolia Beech 15
DH-3.1.7.3 STK-WC-19-15MM Congo Pine 15
DH-3.1.8.1 STK-WC-32-15MM Rimba Weige 15
DH-3.1.9.1 STK-WC-36-15MM Wild Zebrano 15
DH-3.1.10.1 STK-WC-41-15MM Splendor Cherry 15
DH-3.1.11.1 STK-WC-42-15MM Senzbrono 15
DH-3.1.12.1 STK-WC-43-15MM Natural Maple 15
DH-3.1.13.1 STK-WC-50-15MM Sapeili Walnut 15
DH-3.1.14.1 STK-WC-58-15MM Majestic Beech 15
DH-3.1.15.1 STK-WC-63-15MM Malina Maple 15
DH-3.1.16.1 STK-WC-72-15MM 15
DH-3.1.17.1 STK-WC-75-15MM
DH-3.1.18.1 STK-WC-80-15MM
DH-3.1.19.1
DH-3.1.20.1

9.2 Decoration Hardware www.ecoware.com.my

DH-3.1 FURNITURE DECORATION STICKER

EARTY ASCIUTTO CAVIAR STRIAE LOFTY ASCIUTTO CAVIAR LEINEN TAUPE TASTSINN
STK-QW-911 STK-SW-942 STK-QW-642 STK-SW-011 STK-QW-941

15MM 15MM 15MM 15MM 15MM

H-IYOKO BOLOGNA HAZEL FINELINE BURGUBDY BEECH PINOKO PINE DOUGLAS PINE
STK-QW-699 STK-SW-614 STK-SW-562 STK-QW-200 STK-QW-111

15MM 15MM 15MM 15MM 15MM

TAKA IBERO ALPOCO ASCIUTTIO WALNUT LACCA PUMICE ASCIUTTO MANILA FINELINE
STK-QW-613 STK-QW-830 STK-SW-809 STK-QW-550 STK-QW-153

15MM 15MM 15MM 15MM 15MM

CONGO PINE CAVIAR GROSSOLANE NORI ASCIUTTO CREME ASCIUTTO RECOR ASCIUTTO I
STK-QW-121 STK-SW-239 STK-QW-223 STK-QW-331 STK-QW-024
Size II (mm) : 1.0
15MM 15MM 15MM 15MM 15MM Material : PVC

SIZE: 15mm Colour II
PACKING: 48pcs/card, Recor Asciutto
10card/pkt, 25pkt/ctn Douglas Pine Size I (mm)
15
DECORATION STICKER Code Congo Pine 15
STK-QW-024-15MM Manila Fineline 15
Model STK-QW-111-15MM 15
DH-3.1.21.1 STK-QW-121-15MM Pinoko Pine 15
DH-3.1.22.1 STK-QW-153-15MM Nori Asciutto 15
DH-3.1.23.1 STK-QW-200-15MM Creme Asciutto 15
DH-3.1.24.1 STK-QW-223-15MM Pumice Asciutto 15
DH-3.1.25.1 STK-QW-331-15MM Taka Ibero 15
DH-3.1.26.1 STK-QW-550-15MM Lofty Asciutto 15
DH-3.1.27.1 STK-QW-613-15MM H-iyoko Bologna 15
DH-3.1.28.1 STK-QW-642-15MM Alpoco Asciutto 15
DH-3.1.29.1 STK-QW-669-15MM Earty Asciutto 15
DH-3.1.30.1 STK-QW-830-15MM Taupe Tastsinn 15
DH-3.1.31.1 STK-QW-911-15MM Caviar Leinen 15
DH-3.1.32.1 STK-QW-941-15MM Caviar Grossolano 15
DH-3.1.33.1 STK-SW-011-15MM Burgundy Beech 15
DH-3.1.34.1 STK-SW-239-15MM Hazel Fineline 15
DH-3.1.35.1 STK-SW-562-15MM Walnut Lacca 15
DH-3.1.36.1 STK-SW-614-15MM Caviar Striae 15
DH-3.1.37.1 STK-SW-809-15MM
DH-3.1.38.1 STK-SW-942-15MM
DH-3.1.39.1
DH-3.1.40.1

www.ecoware.com.my Decoration Hardware 9.3

DH-4.1 DH-4.2.1

PVC VENTILATION COVER * All Measure in (mm) STAINLESS STEEL VENTILATION COVER

Model Code Material Colour Size Model Code Material Finish Size I (mm) Size II (mm) Size III (mm) Size IV (mm)
DH-4.1.1 PVC-RVC022 PVC White 1-1/4” Stainless Steel Satin
DH-4.1.2 PVC-RVC024 PVC White 2-1/2” DH-4.2.1.1 VC-SS19 Stainless Steel Satin 30 1 7 19
DH-4.1.3 PVC-RVC0208-WH PVC White 2” x 8” Stainless Steel Satin
DH-4.2.1.2 VC-SS35 Stainless Steel Satin 42 1 7 35

DH-4.2.1.3 VC-SS53 65 1 7 53

DH-4.2.1.4 VC-SS80 90 1 7 80

DH-4.2.2 DH-4.3

STAINLESS STEEL VENTILATION COVER - BLACK STAINLESS STEEL VENTILATION COVER - ROUND TYPE II

Model Code Material Finish Size I (mm) Size II (mm) Size III (mm) Size IV (mm) Model Code Material Finish Size I (mm) Size II (mm) Size III (mm) Size IV (mm)
Black DH-4.3.1 VC-SS19-II StainlessSteel Satin
DH-4.2.2.1 VC-SS19-BLK StainlessSteel Black 30 1 7 19 DH-4.3.2 VC-SS35-II StainlessSteel Satin 33 3 7 19
Black DH-4.3.3 VC-SS53-II StainlessSteel Satin
DH-4.2.2.2 VC-SS35-BLK StainlessSteel 42 1 7 35 42 3 7 35

DH-4.2.2.3 VC-SS53-BLK StainlessSteel 65 1 7 53 65 3 7 53

DH-4.4.1 DH-5.1

35MM STAINLESS STEEL VENTILATION COVER PVC MIRROR HOLDER
* All Measure in (mm)
ROUND TYPE II - DOUBLE SIDE

Model Code Material Finish Model Code Material Colour Size I (mm) Angle
DH-4.4.1 VC-SS35-II-D Stainless Steel Satin DH-5.1.1 PVC-MH3090 PVC White 3 90^
DH-5.1.2 PVC-MH3180 PVC White 3 180^
DH-5.1.3 PVC-MH5090 PVC White 5 90^
DH-5.1.4 PVC-MH5180 PVC White 5 180^

DH-6.1

SINGLE SCREW COVER * All Measure in (mm)

Model Code Material Colour
DH-6.1.1 PVC-SC-SWH PVC White
DH-6.1.2 PVC-SC-SGR PVC Grey

9.4 Decoration Hardware www.ecoware.com.my

DH-7.1 DH-7.1

PVC WIRE COVER 60MM (2”) * All Measure in (mm) PVC WIRE COVER 80MM (3”) * All Measure in (mm)

Model Code Material Colour Model Code Material Colour
DH-7.1.1.1 PVC-WC-20BE ABS Beige DH-7.1.1.2 PVC-WC-30BE ABS Beige
DH-7.1.2.1 PVC-WC-20BL ABS Black DH-7.1.2.2 PVC-WC-30BL ABS Black
DH-7.1.3.1 PVC-WC-20BR ABS Brown DH-7.1.3.2 PVC-WC-30BR ABS Brown
DH-7.1.4.1 PVC-WC-20DG ABS Dark Grey DH-7.1.4.2 PVC-WC-30DG ABS Dark Grey
DH-7.1.5.1 PVC-WC-20LG ABS Light Grey DH-7.1.5.2 PVC-WC-30LG ABS Light Grey
DH-7.1.6.1 PVC-WC-20N ABS Nyatoh DH-7.1.6.2 PVC-WC-30N ABS Nyatoh
DH-7.1.7.1 PVC-WC-20OK ABS Oak DH-7.1.7.2 PVC-WC-30OK ABS Oak
DH-7.1.8.1 PVC-WC-20WH ABS White DH-7.1.8.2 PVC-WC-30WH ABS White

DH-7.2.1 DH-7.2.2

STEEL WIRE COVER

Model Code Material Colour Size I (mm) Size II (mm) Size III (mm) Size IV (mm) Size
67.80 1.80 12.90 54.20 2”
DH-7.2.1 WC-20CH Zinc Alloy Polished Chrome 89 1.50 12.35 75 3”

DH-7.2.2 WC-30CH Zinc Alloy Polished Chrome

DH-8.1.1 DH-8.1.2

ALUMINIUM VENTILATION COVER - 5 HOLE ALUMINIUM VENTILATION COVER - 5 HOLE (BLACK)

Model Code Material Finish Size I Size II Model Code Material Finish Size I Size II
DH-8.1.1.1 VC-AL150-5 Aluminium Alloy Matt 50 150 DH-8.1.2.1 VC-AL150-5-BLK Aluminium Alloy Black 50 150
DH-8.1.1.2 VC-AL200-5 Aluminium Alloy Matt 50 200 DH-8.1.2.2 VC-AL200-5-BLK Aluminium Alloy Black 50 200
DH-8.1.1.3 VC-AL250-5 Aluminium Alloy Matt 50 250 DH-8.1.2.3 VC-AL250-5-BLK Aluminium Alloy Black 50 250
DH-8.1.1.4 VC-AL300-5 Aluminium Alloy Matt 50 300 DH-8.1.2.4 VC-AL300-5-BLK Aluminium Alloy Black 50 300
DH-8.1.1.5 VC-AL400-5 Aluminium Alloy Matt 50 400 DH-8.1.2.5 VC-AL400-5-BLK Aluminium Alloy Black 50 400

www.ecoware.com.my Decoration Hardware 9.5

DH-8.2.1 DH-8.2.2
* All Measure in (mm)

ALUMINIUM VENTILATION COVER - 9 HOLE Demonstration Video ALUMINIUM VENTILATION COVER - 9 HOLE (BLACK) * All Measure in (mm)

Model Code Material Finish Size I Size II Model Code Material Finish Size I Size II
DH-8.2.1.1 VC-AL150-8 Aluminium Alloy Matt
DH-8.2.1.2 VC-AL200-8 Aluminium Alloy Matt 80 150 DH-8.2.2.1 VC-AL150-8-BLK Aluminium Alloy Black 80 150
DH-8.2.1.3 VC-AL225-8 Aluminium Alloy Matt
DH-8.2.1.4 VC-AL250-8 Aluminium Alloy Matt 80 200 DH-8.2.2.2 VC-AL200-8-BLK Aluminium Alloy Black 80 200
DH-8.2.1.5 VC-AL300-8 Aluminium Alloy Matt
DH-8.2.1.6 VC-AL350-8 Aluminium Alloy Matt 80 225 DH-8.2.2.3 VC-AL225-8-BLK Aluminium Alloy Black 80 225
DH-8.2.1.7 VC-AL410-8 Aluminium Alloy Matt
DH-8.2.1.8 VC-AL450-8 Aluminium Alloy Matt 80 250 DH-8.2.2.4 VC-AL250-8-BLK Aluminium Alloy Black 80 250
DH-8.2.1.9 VC-AL500-8 Aluminium Alloy Matt
DH-8.2.1.10 VC-AL600-8 Aluminium Alloy Matt 80 300 DH-8.2.2.5 VC-AL300-8-BLK Aluminium Alloy Black 80 300
DH-8.2.1.11 VC-AL800-8 Aluminium Alloy Matt
80 350 DH-8.2.2.6 VC-AL350-8-BLK Aluminium Alloy Black 80 350

80 400 DH-8.2.2.7 VC-AL410-8-BLK Aluminium Alloy Black 80 400

80 450 DH-8.2.2.8 VC-AL450-8-BLK Aluminium Alloy Black 80 450

80 500 DH-8.2.2.9 VC-AL500-8-BLK Aluminium Alloy Black 80 500

80 600 DH-8.2.2.10 VC-AL600-8-BLK Aluminium Alloy Black 80 600

80 800 DH-8.2.2.11 VC-AL800-8-BLK Aluminium Alloy Black 80 800

DH-9.1.1 DH-9.1.2

* All Measure in (mm)

RECTANGLE WIRE COVER 80MM Demonstration Video RECTANGLE WIRE COVER 80MM (BLACK) * All Measure in (mm)

Model Code Material Finish Size I Size II Size III Model Code Material Finish Size I Size II Size III

DH-9.1.1.1 WC-R-AL80 AluminiumAlloy Matt 80 80 67 DH-9.1.2.1 WC-R-AL80-BLK Aluminium Alloy Black 80 80 67

DH-9.1.1.2 WC-R-AL160 AluminiumAlloy Matt 80 160 147 DH-9.1.2.2 WC-R-AL160-BLK Aluminium Alloy Black 80 160 147

DH-9.1.1.3 WC-R-AL270 AluminiumAlloy Matt 80 270 260 DH-9.1.2.3 WC-R-AL270-BLK Aluminium Alloy Black 80 270 260

DH-9.1.1.4 WC-R-AL400 AluminiumAlloy Matt 80 400 389 DH-9.1.2.4 WC-R-AL400-BLK Aluminium Alloy Black 80 400 389

DH-9.1.1.5 WC-R-AL500 AluminiumAlloy Matt 80 500 489 DH-9.1.2.5 WC-R-AL500-BLK Aluminium Alloy Black 80 500 489

DH-9.1.1.6 WC-R-AL600 AluminiumAlloy Matt 80 600 589 DH-9.1.2.6 WC-R-AL600-BLK Aluminium Alloy Black 80 600 589

DH-9.2.1 DH-9.2.2
* All Measure in (mm)

RECTANGLE WIRE COVER 120MM Demonstration Video RECTANGLE WIRE COVER 120MM (BLACK) * All Measure in (mm)

Model Code Material Finish Size I Size II Size III Model Code Material Finish Size I Size II Size III
DH-9.2.1.1 WC-R-AL-120*150 Aluminium Alloy Matt
DH-9.2.1.2 WC-R-AL-120*400 Aluminium Alloy Matt 120 150 137 DH-9.2.2.1 WC-R-AL-120*150-BLK Aluminium Alloy Black 120 150 137
DH-9.2.1.3 WC-R-AL-120*500 Aluminium Alloy Matt
DH-9.2.1.4 WC-R-AL120*600 Aluminium Alloy Matt 120 400 390 DH-9.2.2.2 WC-R-AL-120*400-BLK Aluminium Alloy Black 120 400 390

120 500 489 DH-9.2.2.3 WC-R-AL-120*500-BLK Aluminium Alloy Black 120 500 489

120 600 589 DH-9.2.2.4 WC-R-AL-120*600-BLK Aluminium Alloy Black 120 600 589

9.6 Decoration Hardware www.ecoware.com.my

Features:

1. Flexible cable management includes brush liners on either side for
cable pass - through.

2. Gear, buffering, silent, opening and closing.
3. Double - sided open design more flexible, access to cable from

both side, suitable for boardrooms and conference rooms.
4. Aluminium cover with high - quality feel.

400 390
140
42
148
140
DH-9.3.1 390

ALUMINIUM RECTANGLE WIRE COVER - DOUBLE * All Measure in (mm)

Model Code Material Finish Size Open Hole Size
390*140*42
DH-9.3.1 WC-R-AL-150*400-D Aluminium Anodized Silver 400*148*44
(Length Customizable)

DH-10.1.1

WIRE COVER WITH DAMPER * All Measure in (mm) Demonstration Video

Model Code Material Finish Size I Size II Size III
Aluminium Alloy Matt
DH-10.1.1 WC-R-AL300-D 130 300 288

DH-11.1

RECTANGLE WIRE COVER WITH HOLE * All Measure in (mm) Demonstration Video

Model Code Material Finish Size I Size II Size III
Aluminium Alloy Matt 290
DH-11.1.1 WC-R-AL300-3H Aluminium Alloy Matt 135 300 390
Aluminium Alloy Matt 490
DH-11.1.2 WC-R-AL400-4H 135 400

DH-11.1.3 WC-R-AL500-5H 135 500

www.ecoware.com.my Decoration Hardware 9.7

Features:

1. Has a simple installation process and is ideal for saving

space in a kitchen or office environment.

2. Hydraulic lifting mechanism: Plug this pop box and play with

soft-opening.

3. Capable of charging the latest tablets and phones.

4. Pre-wired with 1.5m cable. Connect desktop equipment

conveniently.

5. Modules customizable for request to fit different environment.

6. Easy to fit or retro-fit, and fits flush to work surfaces.

DH-11.1.1

TABLETOP POP-UP POWER SOCKET - SILVER Demonstration Video

Model Code Material Finish Size (mm) Open Hole Size (mm)
Aluminium + ABS
DH-11.1.1 ELT-PPS-SV Anodized Silver 113*380 ø100

Features:

1. Provides USB & AC Power, data, and A/V connections to desktop.
2. Concealable outlets with a lid opening let you close the lid while
devices are connected to minimize workspace obstruction.
3. Feature aluminium seamless frame and soft closing flip lid.
4. Brushed finish with textured face presents a classy aesthetic that fits
into any environment ideal for the conference room, courtroom, work

station, laboratory and more.

3 Powers 1 RJ45 1 RJ11 1 VGA
Data

DH-11.2

TABLETOP POWER SOCKET WITH COVER

Model Code Material Finish Size (mm) Open Hole Size (mm)
Aluminium Brushed Silver 300*120*112 285*108*110
DH-11.2.1 ELT-PS-SV Aluminium Brushed Black 300*120*112 285*108*110

DH-11.2.2 ELT-PS-BLK

9.8 Decoration Hardware www.ecoware.com.my

ROLLER SHUTTER I
DH-12.1

DH-12.1.1 DH-12.1.2

8.50 23.12

20.60

28.55

PANEL * All Measure in (mm) HANDLE * All Measure in (mm)
Model
DH-12.1.1 Code Material Colour Length Model Code Material Colour Length
RS-P25SV
DH-12.1.3 PVC Silver 2500 DH-12.1.2 RS-HDL25SV PVC Silver 2500

DH-12.1.4

11 93.70
20.40

19.28

U-CHANNEL * All Measure in (mm) CORNER * All Measure in (mm)
Model Model
DH-12.1.3 Code Material Colour Length Code Material Colour
4 DH-12.1.4
RS-U25SV PVC Silver 2500 RS-CN25SV PVC Silver

www.ecoware.com.my Decoration Hardware 9.9

DH-12.2 P38 SERIES ROLLER SHUTTER II

12

DH-12.2.1 * All Measure in (mm) DH-12.2.2 * All Measure in (mm)

PANEL Code Material Colour Length RECCESSED HANDLE Code Material Colour
RS-P38-PNL PVC Silver 2500 RS-P38-HDL ABS Silver
Model Model
DH-12.2.1 3 DH-12.2.2

4

DH-12.2.3 DH-12.2.4

ALUMINIUM BASIC PROFILE * All Measure in (mm) PVC COVER * All Measure in (mm)

Model Code Material Colour Length Model Code Material Colour Length
2500 DH-12.2.4 RS-P38-PC 2500
DH-12.2.3 RS-P38-BP Aluminium Alloy NA PVC Silver
6
5

DH-12.2.5 * All Measure in (mm) DH-12.2.6 * All Measure in (mm)

STRAIGHT TRACK Code Material Colour Length CORNER Code Material Colour
RS-P38-ST Aluminium NA 2500 RS-P38-CN ABS Silver
Model Model
DH-12.2.5 7 DH-12.2.6

8

DH-12.2.7 * All Measure in (mm) DH-12.2.8 * All Measure in (mm)

CENTRE STOPPER Code Material Colour END CAP Code Material Colour
RS-P38-CSTP ABS Silver RS-P38-EC PP Black
Model Model
DH-12.2.7 DH-12.2.8

9

DH-12.2.9 DH-12.2.10

ROLLER GUIDE LOCK

Model Code Material Colour Model Code Material Colour Size
DH-12.2.9 RS-P38-ROL PP Black DH-12.2.10 LK-CL611-22-CL2-200F-M1 Zinc Alloy Nickel 22mm

9.10 Decoration Hardware www.ecoware.com.my

DH-13.1.1 DH-13.2.1

* All Measure in (mm) Demonstration Video K641 GRIP SYSTEM * All Measure in (mm)
K625 GRIP SYSTEM

Model Code Material Finish Model Code Material Finish
DH-13.1.1 GS-K625 Iron GS-K641 Zinc Alloy Nickel
Nickel DH-13.2.1

DH-13.3.1 DH-13.4.1
* All Measure in (mm)
Demonstration Video K612 GRIP SYSTEM * All Measure in (mm)
K610 GRIP SYSTEM

Model Code Material Finish Model Code Material Finish
DH-13.3.1 GS-K610 Zinc Alloy GS-K612 Zinc Alloy Nickel
Nickel DH-13.4.1

DH-13.5.1 DH-13.5.2

* All Measure in (mm) Demonstration Video K673A GRIP SYSTEM * All Measure in (mm)
K673 GRIP SYSTEM

Model Code Material Finish Model Code Material Finish
DH-13.5.1 GS-K673 Zinc Alloy Brass Stainless Steel Nickel
Nickel DH-13.5.2 GS-K673A

DH-13.6.1 DH-13.7.1

* All Measure in (mm) Demonstration Video K634 GRIP SYSTEM * All Measure in (mm)
K688 GRIP SYSTEM

Model Code Material Finish Model Code Material Finish
Zinc Alloy GS-K634 Zinc Alloy Nickel
DH-13.6.1 GS-K688 Nickel DH-13.7.1

www.ecoware.com.my Decoration Hardware 9.11

DH-13.8.1 DH-13.9.1 Demonstration Video

K605 GRIP SYSTEM Demonstration Video * All Measure in (mm)

Model * All Measure in (mm) K643 GRIP SYSTEM
DH-13.8.1
Code Material Finish Model Code Material Finish
GS-K605 Zinc Alloy Nickel DH-13.9.1 GS-K643 Zinc Alloy Nickel

DH-13.10.1 DH-13.11.1

K645 GRIP SYSTEM * All Measure in (mm) K629 GRIP SYSTEM * All Measure in (mm)

Model Code Material Finish Model Code Material Finish
DH-13.10.1 GS-K645 Zinc Alloy Nickel DH-13.11.1 GS-K629 Zinc Alloy Nickel

DH-13.12.1 DH-13.13.1

K665 GRIP SYSTEM Demonstration Video

Model * All Measure in (mm) K692 GRIP SYSTEM * All Measure in (mm)
DH-13.12.1
Code Material Finish Model Code Material Finish
GS-K665 Zinc Alloy Nickel DH-13.13.1 GS-K692 Zinc Alloy Nickel

DH-13.14.1 DH-13.15.1

K604 GRIP SYSTEM * All Measure in (mm) OAC EXPANDING BOLT * All Measure in (mm)

Model Code Material Finish Model Code Material Finish
DH-13.14.1 GS-K604 Zinc Alloy Nickel DH-13.15.1 PL-EYE-OAC130 Steel Nickel

DH-13.16.1 * All Measure in (mm) DH-13.17.1 * All Measure in (mm)

3MM U CLIP Code Material Finish 3MM FERUM Code Material Finish
GS-UC-3M GS-FR-1.5M
Model Iron Nickel Model Aluminium Satin Brush
DH-13.16.1 DH-13.17.1

9.12 Decoration Hardware www.ecoware.com.my

GRIP SYSTEM
INSTALLATION DIAGRAM:

1.50

DH-13.18.1

1.5MM STAINLESS STEEL WIRE ROPE * All Measure in (mm)

Model Code Material Finish

DH-13.18.1 ROP-SS-15 Stainless Steel Nickel

Material : Aluminium
Colour : Satin
Usage : Dining Table, Displays, etc.

DH-14.1

ALUMINIUM SWIVEL

Model Code Size Size I (mm) Size II (mm) Loading Capacity (kg) Max Diameter of Dining Table
(mm)

DH-14.1.1 AL-SW-08 8” 202 10 50 300~400
DH-14.1.2 AL-SW-10 10”
DH-14.1.3 AL-SW-12 12” 250 8.90 50 400~500
DH-14.1.4 AL-SW-14 14”
DH-14.1.5 AL-SW-16 16” 300 8.90 50 500~600
DH-14.1.6 AL-SW-18 18”
DH-14.1.7 AL-SW-20 20” 350 8.90 60 600~700
DH-14.1.8 AL-SW-24 24”
DH-14.1.9 AL-SW-32 32” 390 8.90 60 700~800
DH-14.1.10 AL-SW-40 40”
450 10 60 800~900

505 10 80 900~1000

600 12.75 100 1000~1200

798 14.15 120 1400~1600

990 16.30 150 1600~2000

DH-14.2 DH-14.3.1 Features:
• 360° Free Rotation

* All Measure in (mm)

SQUARE TURN SWIVEL Demonstration Video SQUARE TURN SWIVEL * All Measure in (mm)

Model Code Material Colour Size I Size II Size III Size IV Loading Model Code Material Colour Size I Size II Size III Size IV Loading
Black Capacity Capacity
Black
DH-14.2.1 DS-TV-SQ72 Iron Black 72 72 7.30 35.74 30kg DH-14.3.1 DS-TV-SQ175 A3 Steel Plate Electrophoresis 175 175 19 14.50 113kg

DH-14.2.2 DS-TV-SQ94 Iron 94 94 8 54.50 50kg

DH-14.2.3 DS-TV-SQ155 Iron 155 155 6.75 118 80kg

DH-15.1.1 DH-15.2.1

STAINLESS STEEL SWIVEL RACK BRACKET TWO LAYER STAINLESS STEEL SWIVEL RACK BRACKET THREE LAYER

Model Code Material Finish Loading Capacity Cabinet Inner Size Model Code Material Finish Loading Capacity Cabinet Inner Size
BSN 10kg Min D 210mm* H 320mm BSN
DH-15.1.1 IF-SR-SS Stainless Steel DH-15.2.1 IF-SR-SS03 Stainless Steel 10kg Min D 210mm* H 320mm

www.ecoware.com.my Decoration Hardware 9.13

furniture
cabinet legs

FCL-1.1

KITCHEN CABINET SKIRTING BOARD

Model Code Material Colour Size I (mm) Size II (mm)
FCL-1.1.1.1 IF-SB100-AL PVC + Aluminium Silver 100 4000
FCL-1.1.1.2 IF-SB150-AL PVC + Aluminium Silver 150 4000
FCL-1.1.2.1 IF-SB100-BLK PVC + Aluminium Black 100 4000
FCL-1.1.2.2 IF-SB150-BLK PVC + Aluminium Black 150 4000

37.50

26.10

FCL-1.2

KITCHEN CABINET SKIRTING BOARD CORNER * All Measure in (mm)

Model Code Material Colour
FCL-1.2.1.1 IF-SB100-AL-CR PVC + Aluminium Silver
FCL-1.2.1.2 IF-SB150-AL-CR PVC + Aluminium Silver
FCL-1.2.2.1 IF-SB100-BLK-CR PVC + Aluminium Black
FCL-1.2.2.2 IF-SB150-BLK-CR PVC + Aluminium Black

FCL-1.3.1.1 FCL-1.3.2.1

I

Demonstration Video (SB100)

FCL-1.3.3 FCL-1.3.4

KITCHEN CABINET SKIRTING BOARD PVC LEG & CLIP Demonstration Video (SB150)

Model Code Material Colour Size I (mm) Adjustable Height (mm) Packing
IF-SB100-LEG PP Black 105 4pcs legs + 2 clips
FCL-1.3.1.1 IF-SB150-LEG PP Black 145 15 4pcs legs + 2 clips
FCL-1.3.1.2 IF-SB100-LEG-WH PP White 105 10 4pcs legs + 2 clips
FCL-1.3.2.1 IF-FL-4PVC-ACC-BLK PP Black - 15
FCL-1.3.3 IF-FL-4PVC-ACC-WH PP White - - -
FCL-1.3.4 - -

www.ecoware.com.my Furniture Cabinet Legs 10.1

FCL-1.4.1 FCL-1.4.2

I

PVC LEG & CLIP Code Material Colour Size I (mm) Adjustable Height (mm) Packing
Model S-FL-4PVC PVC White 100
S-FL-4PVC-ACC PVC White - 10 4pcs legs + 2 clips
FCL-1.4.1 --
FCL-1.4.2

10.2 Furniture Cabinet Legs www.ecoware.com.my

FCL-7.1.1 * REMOVE PROTECTOR

WALL SEAL Code Length (mm) Finish Material
WS-SV 5000
Model Silver PVC + Aluminium
FCL-7.1.1

* INSTALLATION GUIDE:

FCL-7.2.1 Code * All Measure in (mm) Material
WS-IC-SV PVC
WALL SEAL INNER CORNER - SILVER Colour
Grey * INSTALLATION GUIDE:
Model
FCL-7.2.1

FCL-7.2.2 Code * All Measure in (mm) Material
WALL SEAL OUTER CORNER - SILVER WS-OC-SV PVC
Colour
Model Grey * INSTALLATION GUIDE:
FCL-7.2.2

FCL-7.3 LEFT RIGHT

WALL SEAL END CAP - GREY (LEFT) A & (RIGHT) B * All Measure in (mm)

Model Code Colour Material
FCL-7.3.1 WS-EC-GR-L Grey PVC
FCL-7.3.2 WS-EC-GR-R Grey PVC

www.ecoware.com.my Furniture Cabinet Legs 10.3

FCL-2.1 FCL-2.2.1

LK-A001A SOFA LEG LK-A006A SOFA LEG

Model Code Material Finish Size I Size II Adjustable Height Model Code Material Finish Size I (mm) Size II (mm)
(mm) (mm) (mm) FCL-2.2.1 S-FLLK-A006A-150 Zinc Alloy Nickel 49 150
FCL-2.1.1 S-FLLK-A001A-100 Aluminium + Iron Satin
FCL-2.1.2 S-FLLK-A001A-150 Aluminium + Iron Satin 50 95 3

50 151 4

FCL-2.3.1 FCL-3.1

LK-A092A SOFA LEG NAIL ON GUIDE

Model Code Material Finish Size I Size II Adjustable Height Model Code Material Colour Size I Size II Size III
FCL-2.3.1 (mm) (mm) (mm) White (mm) (mm) (mm)
S-FLLK-A092A-150 Aluminium + Iron Satin FCL-3.1.1 S-NOG060 Plastic Iron White
49 152 4 FCL-3.1.2 S-NOG050 Plastic Iron 15 4.70 19.50

10.54 4.46 14.94

FCL-2.4.1 FCL-2.4.2

Material : Iron StainlessSteel PP *All Measure in (mm) Material : Iron StainlessSteel PP
Finish : Chrome Finish : Nickel

Adjustable Height : 8 Adjustable Height : 8

Thickness : 0.80 Thickness : 0.80

LK-A096 SOFA LEG - CHROME Demonstration Video LK-A096 SOFA LEG - BSN *All Measure in (mm)

Model Code Size I Size II Model Code Size I Size II
50 80 (3”) S-FLLK-A096-75BSN 50 80 (3”)
FCL-2.4.1.1 S-FLLK-A096-75CH 50 100 (4”) FCL-2.4.2.1 S-FLLK-A096-100BSN 50 100 (4”)
FCL-2.4.1.2 S-FLLK-A096-100CH 50 120 (5”) FCL-2.4.2.2 S-FLLK-A096-120BSN 50 120 (5”)
FCL-2.4.1.3 S-FLLK-A096-120CH 50 150 (6”) FCL-2.4.2.3 S-FLLK-A096-150BSN 50 150 (6”)
FCL-2.4.1.4 S-FLLK-A096-150CH 50 200 (8”) FCL-2.4.2.4 S-FLLK-A096-200BSN 50 200 (8”)
FCL-2.4.1.5 S-FLLK-A096-200CH 50 300 (12”) FCL-2.4.2.5 S-FLLK-A096-300BSN 50 300 (12”)
FCL-2.4.1.6 S-FLLK-A096-300CH FCL-2.4.2.6

Material : Iron StainlessSteel PP
Finish : Nickel
FCL-2.5 FCL-2.6
Adjustable Height : 4

Thickness : 1.20

Material : Iron StainlessSteel PP SW438 HEAVY-DUTY SOFA LEG - BSN *All Measure in (mm)
Finish : Nickel
Adjustable Height : 6 Model Code Size I Size II
Thickness : 0.70 38 75 (3”)
FCL-2.6.1 S-FL-SW438.075.BSN 38 100 (4”)
SW431 SOFA LEG - BSN *All Measure in (mm) FCL-2.6.2 S-FL-SW438.100.BSN 38 125 (5”)
FCL-2.6.3 S-FL-SW438.125.BSN 38 150 (6”)
Model Code Size I Size II FCL-2.6.4 S-FL-SW438.150.BSN 38 200 (8”)
38 100 (4”) FCL-2.6.5 S-FL-SW438.200.BSN 38 250 (10”)
FCL-2.5.1 S-FL-SW431.100.BSN 38 150 (6”) FCL-2.6.6 S-FL-SW438.250.BSN 38 300 (12”)
FCL-2.5.2 S-FL-SW431.150.BSN 38 200 (8”) FCL-2.6.7 S-FL-SW438.300.BSN
FCL-2.5.3 S-FL-SW431.200.BSN 38 300 (12”)
FCL-2.5.4 S-FL-SW431.300.BSN

10.4 Furniture Cabinet Legs www.ecoware.com.my

FCL-4.1

29-1/2” SW1012 DIA 60MM TABLE LEG *All Measure in (mm)

Model Code Material PP Finish Size I Size II Adjustable Height Thickness
FCL-4.1.1.1 S-FL295CH Iron PP Chrome 60 700 10 0.70
FCL-4.1.2.1 S-FL295BSN Stainless Steel Nickel 60 700 10 0.70

FCL-4.1.1.2

36” SW1012 DIA 60MM TABLE LEG *All Measure in (mm)

Model Code Material Finish Size I Size II Adjustable Height Thickness
FCL-4.1.1.2 S-FL36CH Iron PP Chrome 60 900 15 0.70

FCL-4.1

40” SW1012 DIA 60MM TABLE LEG *All Measure in (mm)

Model Code Material Finish Size I Size II Adjustable Height Thickness
FCL-4.1.1.3 S-FL40CH Iron PP Chrome 60 1000 8 0.70
FCL-4.1.2.2 S-FL40BSN Stainless Steel PP Nickel 60 1000 8 0.70

www.ecoware.com.my Furniture Cabinet Legs 10.5

FCL-4.2.1

29-1/2” SW1012 DIA 70MM TABLE LEG *All Measure in (mm)

Model Code Material Finish Size I Size II Adjustable Height Thickness
FCL-4.2.1 S-FL295CH-70 Iron PP Chrome 76 725 15 1.40

FCL-4.3.1

29-1/2” SW1013 DIA 60MM TABLE LEG *All Measure in (mm)

Model Code Material Finish Size I Size II Adjustable Height Thickness
FCL-4.3.1 S-FL1013BSN Iron Nickel 60 710 3 1.70

FCL-4.4.1

29-1/2” DIA 70MM FOLDING ADJUSTABLE TABLE LEG *All Measure in (mm)

Model Code Material Finish Size I Size II Adjustable Height
FCL-4.4.1 S-FL-295AL-AJ Aluminium PP Satin 60 710~918 80

10.6 Furniture Cabinet Legs www.ecoware.com.my

The computer farewell messy cable.

FCL-5.1.1 Hidden cable, more clean and tidy
WIRE ORGANIZER - SILVER
Code Material Colour Length (mm)
Model WC-WO-SV ABS Silver 750
FCL-5.1.1

This products are using remote to control the table to move
up and down, beside that you also can press the keypad to
control it up and down but you cannot control it manually.

You cannot control it when power failure and the remote
control can buy and replace when no function or missing.

FCL-6.1.1

ELECTRIC LIFT TABLE WITH REMOTE *All Measure in (mm) Demonstration Video
Loading Capacity Table Surface
Model Code Type Height Top Plate Table Thickness

FCL-6.1.1 S-CS15 Electrical lifting with 310-725 300*300*310 100kg Max 800*800 25-50
wireless controller

www.ecoware.com.my Furniture Cabinet Legs 10.7

furniture locks

CUPBOARD DOOR

Furniture lock series provide various function, suitable for cupboard door with
different designs and material.

Single opening door single lock

Hook lock or using cabinet lock with bolt.

Double opening door Cabinet lock
single lock

Double opening door Single opening door
single lock single lock
Double glass lock
Single glass lock
Sliding door lock

11.1 Furniture Locks Double sliding door single lock

www.ecoware.com.my

FL-1.1 FL-1.2.1

#103 CAM LOCK *All Measure in (mm) #502 CAM LOCK *All Measure in (mm)

Model Code Cylinder Diameter I Length II Key Key Type Model Code Cylinder Diameter Length Key Key Type
16 Fold-Key Key Different FL-1.2.1 LK-ECO-502 18 22.8 Fold-Key Key Different
FL-1.1.1 LK-ECO-CL16 15 20 Fold-Key Key Different
25 Fold-Key Key Different
FL-1.1.2 LK-ECO-CL20 15 30 Fold-Key Key Different

FL-1.1.3 LK-ECO-CL25 15

FL-1.1.4 LK-ECO-CL30 15

FL-1.4.1.1

7 16 BLACK

FL-1.3.1 FL-1.4.2.1

22MM #105 PUSH LOCK *All Measure in (mm) 22MM #138 DRAWER LOCK WITH *All Measure in (mm)
STRIKING PLATE
Model Code Cylinder Diameter Length Key Key Type
FL-1.3.1 LK-ECO-PL 19 24 Fold-Key Key Different Model Code Cylinder Diameter Length Key Key Type
22 Fold-Key Key Different
FL-1.4.1.1 LK-ECO-DL22-STP 19 22 Fold-Key Key Different

FL-1.4.2.1 LK-ECO-DL22-BLK-STP 19

FL-1.4.1.2

38MM #138 DRAWER LOCK *All Measure in (mm) FL-1.5.1

Model Code Cylinder Diameter Length Key Key Type SL605 SLAM LOCK *All Measure in (mm)
FL-1.4.1.2 LK-IW-DL38 19
38 Fold-Key Key Different Model Code Cylinder Diameter Length Key Key Type
FL-1.5.1
LK-ECO-SL605 19 22 Fold-Key Key Different

Plastic

FL-1.6.1

SL629 MORTISE LOCK *All Measure in (mm) FL-1.7.1

Model Code Cylinder Diameter Length Key Key Type L407 SINGLE GLASS LOCK *All Measure in (mm)
FL-1.6.1 22 Fold-Key Key Different
LK-ECO-SL629 19 Model

Code Cylinder Diameter Length Key Key Type Glass Thickness
20 Fold-Key
FL-1.7.1 LK-ECO-L407 18 Key Different 8

www.ecoware.com.my Furniture Locks 11.2

Plastic

FL-1.8.1 FL-1.9.1

L409 DOUBLE GLASS LOCK *All Measure in (mm) H308 GLASS PRESS LOCK *All Measure in (mm)

Model Code Cylinder Diameter Length Key Key Type Glass Thickness Model Code Cylinder Diameter Length Key Key Type
18 Fold-Key FL-1.9.1 LK-IW-GPL 22 17 Fold-Key Key Different
FL-1.8.1 LK-ECO-L409 19 Key Different 8

Plastic Plastic

FL-1.10.1 FL-1.11.1

L417 SINGLE GLASS LOCK *All Measure in (mm) L419 DOUBLE GLASS LOCK *All Measure in (mm)

Model Code Cylinder Diameter Length Key Key Type Glass Thickness Model Code Cylinder Diameter Length Key Key Type Glass Thickness
FL-1.10.1 20 Fold-Key
LK-IW-417 18 Fold-Key Key Different 12 FL-1.11.1 LK-IW-419 19 18 Key Different 12

FL-1.12 FL-1.13.1

FL288 FRONT LOCK *All Measure in (mm) SL108 SIDE LOCK *All Measure in (mm)

Model Code Cylinder Diameter I Length II Key Key Type Model Code Cylinder Diameter Length Key Key Type
20 Fold-Key Key Different
FL-1.12.1 LK-ECO-FL288-600-16 16 20 Fold-Key Key Different FL-1.13.1 LK-ECO-SL108-600 25 20 Fold-Key Key Different
20 Key Different
FL-1.12.2 LK-ECO-FL288-600-19 19 20 - Key Different
-
FL-1.12.3 LK-ECO-FL288-600-ACC-16 16

FL-1.12.4 LK-ECO-FL288-600-ACC-19 19

11.3 Furniture Locks www.ecoware.com.my

18.50

14.80 11.10
30
FL-2.1.1 Code Material *All Measure in (mm)
LK-STP Steel Finish Thickness
STRIKING PLATE 1.2
Model Zinc Plated
9
FL-2.1.1 29

20.15 Thickness
1.0
14

FL-2.2.1 Code Material *All Measure in (mm)
LK-STP-TN Steel Finish
STRIKING PLATE - THIN Nickel
Model

FL-2.2.1

FL-2.3.1

STRIKING PLATE WITH COUNTERSINK HEAD *All Measure in (mm)
Finish
Model Code Material Thickness
Steel Zinc Plated 1.0
FL-2.3.1 LK-STP-CH

FL-2.4.1 Code Material *All Measure in (mm) Thickness
LK-STP-SQ Steel Finish 1.5
STRIKING PLATE - SQUARE TYPE Nickel
Model

FL-2.4.1

www.ecoware.com.my Furniture Locks 11.4

What is Key Alike?

Keyed Alike normally refers to a group of locks that operate from the same key. These example refer to file cabinets, but we offer many different types of locks with the keyed alike feature.

Examples:

If you order 3 locks keyed alike, all three locks will operate from the same key so you would not need to carry a different key to open each lock. Most locks include 2 keys each, so on the 3 locks example you would
receive 6 identical keys (assuming 2 per lock) to operate your group of three locks. See product description to determine how many keys come with the specific lock.

Cylinder Diameter : 19
Length : 24
Key : Fold-Key
Key Type : Key Alike

FL-1.14 *All Measure in (mm)

22MM #105 PUSH LOCK - K/A Code Key No.
LK-IW-PL-KA806 #806
Model LK-IW-PL-KA808 #808
FL-1.14.1 LK-IW-PL-KA816 #816
FL-1.14.2 LK-IW-PL-KA818 #818
FL-1.14.3 LK-IW-PL-KA826 #826
FL-1.14.4 LK-IW-PL-KA828 #828
FL-1.14.5 LK-IW-PL-KA836 #836
FL-1.14.6 LK-IW-PL-KA838 #838
FL-1.14.7 LK-IW-PL-KA846 #846
FL-1.14.8 LK-IW-PL-KA848 #848
FL-1.14.9
FL-1.14.10 Cylinder Diameter : 15
Length : 30
FL-1.15 Key : Fold-Key
Key Type : Key Alike
30MM #103 CAM LOCK - K/A
*All Measure in (mm)
Model
FL-1.15.1 Code Key No.
FL-1.15.2 LK-IW-CL30-KA806 #806
FL-1.15.3 LK-IW-CL30-KA808 #808
FL-1.15.4 LK-IW-CL30-KA816 #816
FL-1.15.5 LK-IW-CL30-KA818 #818
FL-1.15.6 LK-IW-CL30-KA826 #826
FL-1.15.7 LK-IW-CL30-KA828 #828
FL-1.15.8 LK-IW-CL30-KA836 #836
FL-1.15.9 LK-IW-CL30-KA838 #838
FL-1.15.10 LK-IW-CL30-KA846 #846
FL-1.15.11 LK-IW-CL30-KA848 #848
FL-1.15.12 LK-IW-CL30-KA856 #856
FL-1.15.13 LK-IW-CL30-KA858 #858
FL-1.15.14 LK-IW-CL30-KA866 #866
FL-1.15.15 LK-IW-CL30-KA868 #868
FL-1.15.16 LK-IW-CL30-KA876 #876
FL-1.15.17 LK-IW-CL30-KA878 #878
FL-1.15.18 LK-IW-CL30-KA886 #886
FL-1.15.19 LK-IW-CL30-KA888 #888
FL-1.15.20 LK-IW-CL30-KA896 #896
LK-IW-CL30-KA898 #898
11.5 Furniture Locks
www.ecoware.com.my

Cylinder Diameter : 19
Length : 22
Key : Fold-Key
Key Type : Key Alike

FL-1.16

22MM #138 DRAWER LOCK WITH STRIKING PLATE - K/A *All Measure in (mm)

Model Code Key No.
FL-1.16.1 LK-ECO-DL22-STP-KA608 #608
FL-1.16.2 LK-ECO-DL22-STP-KA618 #618
FL-1.16.3 LK-ECO-DL22-STP-KA628 #628
FL-1.16.4 LK-ECO-DL22-STP-KA638 #638
FL-1.16.5 LK-ECO-DL22-STP-KA648 #648
FL-1.16.6 LK-ECO-DL22-STP-KA658 #658
FL-1.16.7 LK-ECO-DL22-STP-KA668 #668
FL-1.16.8 LK-ECO-DL22-STP-KA678 #678
FL-1.16.9 LK-ECO-DL22-STP-KA688 #688
FL-1.16.10 LK-ECO-DL22-STP-KA698 #698

Plastic Cylinder Diameter : 18 Key No.
Length : 20 #806
Key : Fold-Key #808
Key Type : Key Alike #816
#818
FL-1.17 *All Measure in (mm) #826
#828
L407 SINGLE GLASS LOCK - K/A Code #836
LK-IW-L407-KA806 #838
Model LK-IW-L407-KA808 #846
FL-1.17.1 LK-IW-L407-KA816 #848
FL-1.17.2 LK-IW-L407-KA818
FL-1.17.3 LK-IW-L407-KA826 Key No.
FL-1.17.4 LK-IW-L407-KA828 #806
FL-1.17.5 LK-IW-L407-KA836 #808
FL-1.17.6 LK-IW-L407-KA838 #816
FL-1.17.7 LK-IW-L407-KA846 #818
FL-1.17.8 LK-IW-L407-KA848 #826
FL-1.17.9 #828
FL-1.17.10 #836
#838
Plastic Cylinder Diameter : 20 #846
Length : 19 #848
Key : Fold-Key
Key Type : Key Alike Furniture Locks 11.6

FL-1.18 *All Measure in (mm)

L409 DOUBLE GLASS LOCK - K/A Code
LK-IW-L409-KA806
Model LK-IW-L409-KA808
FL-1.18.1 LK-IW-L409-KA816
FL-1.18.2 LK-IW-L409-KA818
FL-1.18.3 LK-IW-L409-KA826
FL-1.18.4 LK-IW-L409-KA828
FL-1.18.5 LK-IW-L409-KA836
FL-1.18.6 LK-IW-L409-KA838
FL-1.18.7 LK-IW-L409-KA846
FL-1.18.8 LK-IW-L409-KA848
FL-1.18.9
FL-1.18.10

www.ecoware.com.my

FL-3.1.1

Magnetic Key Magnetic Body

Specifications:

-Hidden locking system secures item safety. 2x3x6 Waist Hole
-To release, simply place the magnetic key on the outside of the

cupboard or drawer.
-Automatically lock when the door or drawer closes.
-This product is hidden inside cupboard or drawer, the lock can only

be released with the use of the powerful magnetic key.
-Magnetic key can be keep at a safe place (children might open door
/ drawer ) to avoid an accident.
-For all type of door with thickness 12~28mm.
-With red clip to remain door unlocked.
-Easy to install.

Installation Video

INVISIBLE MAGNETIC LOCK *All Measure in (mm)
Material
Model Code Colour

FL-3.1.1 LK-IML Plastic + Magnet White

Warning How to installation : Door Thickness between 12~28mm :

1. 1. 16~28

12~16

-Magnetic key keep away form electronic 2.
product or magnetic card.

-When the lock cannot be unlock, press the
door.

-Firmly at the same time using magnetic key
to open.

-Only one type of magnetic key.

WHEN CLOSED

2.

8 DOOR
Max 3
ø7
WHEN OPEN 20

11.7 Furniture Locks www.ecoware.com.my

FL-4.1

601-22

www.ecoware.com.my Furniture Locks 11.8

FL-4.2

607X-16/20/25/30

11.9 Furniture Locks www.ecoware.com.my

FL-4.3

604-22

www.ecoware.com.my Furniture Locks 11.10

FL-4.4

603H-22

11.11 Furniture Locks www.ecoware.com.my

FL-4.5

612-22

www.ecoware.com.my Furniture Locks 11.12

FL-4.6

602-22

11.13 Furniture Locks www.ecoware.com.my

FL-4.7 UP TO COMBINATIONS

VS VERSION UNLOCKED *2 LENGTH= 20 METAL THICKNESS 15
90°
HL LEFT

37.5

▪ 853-HL-C36 LOCKED 87 24 19.7 82.5
HR RIGHT 19.5 RECOVERY TOOL SOCKET

17 FUNCTION SWAP BUTTON
3
8.1

23.5

▪ 853-HR-C36

FL-4.8 VL LEFT VR RIGHT TN METAL THICKNESS

CODE METAL THICKNESS

A 0.6-1mm

TD TURNING DIRECTION

K3Z LEFT VERSION J9Z RIGHT VERSION Z FROM LOCK TO UNLOCK POSITION
3 J : CLOCKWISE
KZ9 LEFT VERSION JZ3 RIGHT VERSION 9 6 K : COUNTER-CLOCKWISE
K63 LEFT VERSION J69 RIGHT VERSION

▪ 853-VL-C36 ▪ 853-VR-C36 FIXING DETAILS

LOCKED

SPECIFICATIONS
- KEYLESS OPERATION.
- CODE SETTING WITHOUT TOOLS.
- CODE FINDING FROM THE FRONT BY RECOVERY KEY.
- PLASTIC HOUSING.

A SET INCLUDES
- 1 LOCK
- 1 RECOVERY KEY (FOR KEYED DIFFERENT ONLY,

NOT SUPPLIED WITH KEYED ALIKE)

UNLOCKED

FN FINISH

- 66 WHITE
- 91 BLACK

PRODUCT CODE

853-M_ _- VS - TN - FN-C36- TD -CL

ORDERING EXAMPLE & EXPLANATION FIXING HOLE SIZE R10

▪ 853-M1-HR-A-91-C36-J9Z-CL 20+-00.2
83+- 00.2
COMBI-PUBLIC, GROUP 1 MASTER KEY SYSTEM,
HORIZONTAL RIGHT VERSION, 0.6-1mm METAL THICKNESS,
BLACK FINISH, C36 CAM TYPE, 90º CLOCKWISE ROTARY
CAM MOVEMENT, CL LOGO.

NOTE 23

* METAL THICKNESS AFTER PAINTING MUST BE 0.6-1mm.

1

ALL MEASUREMENTS : mm

www.ecoware.com.my Furniture Locks 11.14

shelving
system

SS-1.1.1 SS-1.2.1 & SS-1.3.1
3/16” IRON STUD
* All Measure in (mm) 3/8” STEEL STUD & SOCKET * All Measure in (mm)
Model
SS-1.1.1 Code Material Finish Model Code Material Finish
S-ST015 Steel Nickel SS-1.2.1 S-SST030 Steel Nickel
SS-1.3.1 S-SSK030 Steel Nickel

SS-1.4.1 * All Measure in (mm) SS-1.4.2 * All Measure in (mm)
PVC IRON STUD - WHITE
Code Material Colour PVC IRON STUD - CLEAR Code Material Colour
Model S-PIS-WH White Model S-PIS-CL Transparent
SS-1.4.1 Steel Steel
Polyamide SS-1.4.2 Polyamide

SS-1.5.1 & SS-1.6.1 SS-1.5.2 & SS-1.6.2

#154 3/8” STUD & SOCKET * All Measure in (mm) #154 1/4” STUD & SOCKET * All Measure in (mm)

Model Code Material Finish Model Code Material Finish
SS-1.5.1 S-NST154-030 Steel Nickel SS-1.5.2 S-NST154-020 Steel Nickel
SS-1.6.1 S-NSK154A-030 Steel Nickel SS-1.6.2 S-NSK154A-020 Steel Nickel

SS-1.5.3 & SS-1.6.3 SS-1.5.4 & SS-1.6.4

#154 3/8” STUD & SOCKET - BRASS * All Measure in (mm) #154 1/4” STUD & SOCKET - BRASS * All Measure in (mm)

Model Code Material Finish Model Code Material Finish
SS-1.5.3 S-BST154-030 Brass Nickel SS-1.5.4 S-BST154-020 Brass Nickel
SS-1.6.3 S-BSK154A-030 Brass Nickel SS-1.6.4 S-BSK154A-020 Brass Nickel

SS-1.7.1 & SS-1.6.1 SS-1.8.1

#154 3/8” STUD WITH RUBBER & SOCKET * All Measure in (mm) #1025 GLASS STUD * All Measure in (mm)

Model Code Material Finish Model Code Material Finish
Nickel SS-1.8.1 S-GS1025 Nickel
SS-1.7.1 S-NST154-030-RS Steel Nickel Steel
Rubber Rubber
Steel
SS-1.6.1 S-NSK154A-030

www.ecoware.com.my Shelving System 12.1

SS-1.9.1 SS-1.10.1 & SS-1.11.1

#3402 GLASS STUD * All Measure in (mm) #1024 9MM GLASS STUD & SOCKET - SMALL * All Measure in (mm)

Model Code Material Colour Model Code Material Finish
SS-1.9.1 S-GS3402 Transparent Nickel
Steel SS-1.10.1 S-GS1024ST-9 Brass Nickel
Rubber Rubber
Brass
SS-1.11.1 S-GS1024SO-9

SS-1.10.2 & SS-1.11.2 SS-1.12.1
#3120 GLASS STUD
#1024 10MM GLASS STUD & SOCKET * All Measure in (mm) * All Measure in (mm)
Model
Model Code Material Finish Code Material Finish
Nickel SS-1.12.1 S-GS3120 Polish Chrome
SS-1.10.2 S-GS1024ST-10 Brass Nickel Zinc Alloy
Rubber Rubber
SS-1.11.2 S-GS1024SO-10 Brass

SS-1.13.1 SS-1.14.1

I211 GLASS HOLDER WITH PIN * All Measure in (mm) I211 GLASS HOLDER WITHOUT PIN * All Measure in (mm)

Model Code Material Finish For Glass Thickness Model Code Material Finish For Glass Thickness
SS-1.13.1 GH-I211P Zinc Alloy Nickel 8 SS-1.14.1 GH-I211 Zinc Alloy Nickel 8

SS-1.15.1 SS-1.16.1

I211 GLASS HOLDER WITH PIN - HIGH QUALITY * All Measure in (mm) I211 GLASS HOLDER WITHOUT PIN - HIGH QUALITY * All Measure in (mm)

Model Code Material Finish For Glass Thickness Model Code Material Finish For Glass Thickness

SS-1.15.1 GH-I211P-HQ Zinc Alloy Nickel 8 SS-1.16.1 GH-I211-HQ Zinc Alloy Nickel 8

SS-1.17.1 SS-1.18.1

12*25MM SINGLE GLASS STUD * All Measure in (mm) 12*40MM DOUBLE GLASS STUD * All Measure in (mm)

Model Code Material Finish Drill Hole Model Code Material Finish Drill Hole

SS-1.17.1 S-GS1225 Steel PolishChrome 7.8 SS-1.18.1 S-GS1240 Steel PolishChrome 7.5
Rubber Rubber

12.2 Shelving System www.ecoware.com.my

Material : Zinc Alloy
Finish : Polished Chrome

SS-2.1 Code Size I (mm) Size II (mm) Size III (mm) Size IV (mm) Size V (mm) Glass Thickness
K402 GLASS HOLDER (mm)
GH-K402-08 20.70 33.50 16.40 13.90 8.50 8
Model GH-K402-10 26.80 44.90 21 16.10 11.10
SS-2.1.1 GH-K402-12 29.85 51.10 18.20 12.35 10
SS-2.1.2 23.20
SS-2.1.3 12

SS-2.2.1 * All Measure in (mm)
K405 GLASS HOLDER
Code Material Finish For Glass Thickness
Model GH-K405-08 Zinc Alloy Polished Chrome 8
SS-2.2.1

Material: Zinc Alloy
Finish: Nickel

SS-2.3

SHELF GRIP BRACKET SQUARE * All Measure in (mm)

Model Code Size I Size II Size III Size IV Size V Size VI Size VII Glass Thickness
Adjustable
SS-2.3.1 BK-SGB-SQ-S 17.70 29.70 20.60 21.80 4.20 11.50 38.40 ± 6.60
SS-2.3.2 BK-SGB-SQ-B 16.10 33.60 40.60 23.20 4 15.10 47.10
± 6.60

Material: Zinc Alloy
Finish: Nickel

SS-2.4

SHELF GRIP BRACKET ROUND * All Measure in (mm)

Model Code Size I Size II Size III Size IV Size V Glass Thickness
14.70 Adjustable
SS-2.4.1 BK-SGB-RD-S 4.75 32 22.75 22.80 39.15 ± 6.60
SS-2.4.2 BK-SGB-RD-B 8 44.70 26.70 65
± 6.60

www.ecoware.com.my Shelving System 12.3

Material: Stainless Steel
Finish: BSN

SS-2.5 * All Measure in (mm)

K406 GLASS HOLDER Code Size I Size II Size III Size IV Size V Glass Thickness
GH-K406-08 13.30 27.30 8.85 8
Model GH-K406-10 23.20 39.20 20.20 13.40 11.90 10
SS-2.5.1 GH-K406-12 29.90 46.50 26.20 16.20 13.30 12
SS-2.5.2 31.20 17.20
SS-2.5.3

Material: Stainless Steel
Finish: BSN

SS-2.6 * All Measure in (mm)

K407 GLASS HOLDER Code Size I Size II Size III Size IV Size V Glass Thickness
GH-K407-08 14.10 26.10 19.10 12.90 8.50 8
Model GH-K407-10 16.40 12.15 10
SS-2.6.1 GH-K407-12 23 36 27 16.80 12.50 12
SS-2.6.2 29.30 45.90 33.10
SS-2.6.3

Material: Aluminium
Finish: Matt

SS-2.7 * All Measure in (mm)

K408 GLASS HOLDER Code Size I Size II Size III Size IV Size V Glass Thickness
GH-K408-08 11.80 28.60 19.80 13.50 9.10 8
Model GH-K408-10 14.10 28.20 25.80 15.90 11.10 10
SS-2.7.1 GH-K408-12 34.40 55.70 29.80 18.90 12.90 12
SS-2.7.2
SS-2.7.3

Material: Zinc Alloy
Finish: Chrome

SS-2.8 * All Measure in (mm)

K409 GLASS HOLDER Code Size I Size II Size III Size IV Size V Glass Thickness
GH-K409-10 40.10 55.30 26.70 15.40 10.10 10
Model GH-K409-12 55.75 27.30 17.90 12.15 12
SS-2.8.1 43
SS-2.8.2

12.4 Shelving System www.ecoware.com.my

SS-3.1.1.1 SS-3.1.2.1

9.06 T=1
10.80

12.47

12’ ALUMINIUM MINI POLE * All Measure in (mm)

Model Code Material Finish Length Recessed Mount

SS-3.1.1.1 AL-MP0312 Aluminium Alloy NA 3660 10.5
10.5
SS-3.1.2.1 AL-MP0312-BLK Aluminium Alloy Black 3660

For Open Recessed Mount , Please Select “ ARDEN” #06 - 1/4” x 10.5mm x 30mm Straight Bit Double Flute

SS-3.2.1 SS-3.2.2 SS-3.3.1 #06
SS-3.4.1

17.62 17.30 17.90

15.50 10.72 15.72 15.50

MINI POLE BRACKET Code Material 11.40 11.07

Model AL-MP-B-PC Aluminium Alloy * All Measure in (mm) Use For
AL-MP-B-PC-BLK Aluminium Alloy
SS-3.2.1 Aluminium Alloy Rubber Finish Wood
SS-3.2.2 AL-MP-B-R Wood
SS-3.3.1 AL-MP-B-PVC-PC Nylon NA Glass
SS-3.4.1 Black Wood

NA
Grey

www.ecoware.com.my Shelving System 12.5