ecoWARE Designer Version

Product Details:

Size Icon:

M1 Plate width=TW-3

Installation Information: Install at least four
www.ecoware.com.my cross hidden hinges.

Table Slide 6.2

TS-2.1.1

Specifications:

PULL OUT RISING EXTENSION TABLE SLIDE Demonstration Video

Model Code Colour Internal Cabinet Depth Internal Cabinet Width
Champagne Gold (mm) (mm)
TS-2.1.1 DS-TBE02 Extending Length (mm)
Drawer Height Min 540 600
(mm) 500
Panel Thickness (mm)
Min 135
18

6.3 Table Slide www.ecoware.com.my

Product Details:

Size Icon: Table Slide 6.4
Installation Information:

www.ecoware.com.my

TS-3.1.1

Specifications:

PULL OUT EXTENSION TABLE SLIDE Demonstration Video
Model
Code Colour Internal Cabinet Depth Internal Cabinet Width
Champagne Gold (mm) (mm)
TS-3.1.1 DS-TBE03 Extending Length (mm)
Drawer Height Min 555 600~1200
(mm) 712
Panel Thickness (mm)
Min 146
18

6.5 Table Slide www.ecoware.com.my

Product Details:

Size Icon: Table Slide 6.6
Installation Information:

www.ecoware.com.my

TS-4.1.1

Specifications:

PULL OUT TABLE Demonstration Video

Model Code Colour Internal Cabinet Depth Internal Cabinet Width
DS-TBE04 NA (mm) (mm)
TS-4.1.1
Drawer Height Extending Length (mm) 520 900
(mm) 1500
(681-731)+25 Panel Thickness (mm)

18

6.7 Table Slide www.ecoware.com.my

Product Details: Table Slide 6.8
Size Icon:
Installation Information:

www.ecoware.com.my

bed fittings

BF-1.1

I

II
IV

III
V

CS04 BED FITTING Code Capacity (kg) Gas Spring II Steel Size (mm) V Suitable Bed
Size I (mm) 620 III IV 495 Size (mm)
Model S-BS-338-24 45 1100 625
S-BS-338-44 60 320 1500 108 295 625 1200
BF-1.1.1 S-BS-338-59 90
BF-1.1.2 530 167 462 1400~1800
BF-1.1.3
530 167 462 1800

Installation Instructions Installation Methods

1. Flat plate must be installed with angle plate, and keep the correct
Angle, as large as better. (See Photo)

2. Gas spring, Gas lift must be installed on the bed. Using the power of
120KGS by hands and press down. (* Remark: there is no switch,
can’t take out the lift)

3. Gas spring must be installed like the photo, other ways are not
workable.

7.1 Bed Fittings www.ecoware.com.my

BF-2.1

Folding & Unfolding Dimensions To ensure that the gas spring
The bed must be closed by hand. work functional, total weight
include of bed frames, mattress
Cabinet Dimensions and bed board must between
50~55kg.

Depth

CS07 PULL DOWN BED MECHANISM FOR FRONT FITTING Demonstration Video Installation Video

Model Code Size (mm) Loading Capacity (kg) Suitable Bed
BF-2.1.1 S-BS-CS07S Size (mm)
BF-2.1.2 S-BS-CS07D L W W1 H H1 H2 Weight for mattress Weight for mattress + panel
Single Bed
2180 1038 1002 2143 2125 2107 26~28 50~55 900*2000
(+100)
Double Bed
2180 1638 1602 2143 2125 2107 28~30 70~75 1500*2000
(+100)

www.ecoware.com.my Bed Fittings 7.2

BF-2.2

Folding & Unfolding Dimensions Cabinet Dimensions

The bed must be closed by To ensure that the gas spring
hand. work functional, total weight
include of bed frames, mattress
and bed board must between Depth
50~55kg.

CS07 MOTORISE BED MECHANISM FOR FRONT FITTING Installation Video

Model Code Size (mm) Loading Capacity (kg) Suitable Bed
Size (mm)
L W W1 H H1 H2 Weight for mattress Weight for mattress + panel
Single Bed
BF-2.2.1 S-BS-CS07S-MOTOR 2330 1038 1002 2143 2125 2107 26~28 50~55 900*2000
(+100)
Double Bed
BF-2.2.2 S-BS-CS07S-MOTOR 2330 1638 1602 2143 2125 2107 28~30 70~75 1500*2000
(+100)

Motor Driven

7.3 Bed Fittings www.ecoware.com.my

BF-3.1

Folding & Unfolding Dimensions To ensure that the gas spring
The bed must be closed by hand. work functional, total weight
include of bed frames, mattress
Cabinet Dimensions and bed board must between
50~55kg.

Depth

CS08 PULL DOWN BED MECHANISM FOR SIDE FITTING Demonstration Video Installation Video

Model Code Size (mm) Loading Capacity (kg) Suitable
BF-3.1.1 S-BS-CS08S Bed Size (mm)
BF-3.1.2 S-BS-CS08D L W W1 H H1 H2 Weight for mattress Weight for mattress + panel
Single Bed
1070 2118 2082 1018 1000 982 26~28 50~55 900*2000
(+100) 28~30 70~75
Double Bed
1670 2118 2082 1618 1600 1582 1500*2000
(+100)

www.ecoware.com.my Bed Fittings 7.4

BF-3.2

Folding & Unfolding Dimensions Cabinet Dimensions

The bed must be closed by To ensure that the gas spring
hand. work functional, total weight
include of bed frames, mattress
and bed board must between Depth
50~55kg.

CS08 MOTORISE BED MECHANISM FOR SIDE FITTING Installation Video

Model Code Size (mm) Loading Capacity (kg) Suitable Bed

L W W1 H H1 H2 Weight for mattress Weight for mattress + panel Size (mm)

BF-3.2.1 S-BS-CS08S-MOTOR 1220 2118 2082 1018 1000 982 26~28 50~55 Single Bed
(+100) 28~30 70~75 900*2000

BF-3.2.2 S-BS-CS08D-MOTOR 1820 2118 2082 1618 1600 1582 Double Bed
(+100) 1500*2000

Motor Driven

7.5 Bed Fittings www.ecoware.com.my

BF-4.1.1

Folding & Unfolding Dimensions

Outer Inner

Cabinet Dimensions

( Depth 13 )

Inner Outer

CS09 ROTATING PULL DOWN DOUBLE BED MECHANISM FOR FRONT FITTING WITH MULTI DISPLAY

Model Code Size (mm) Weight for Suitable
L W W1 W3 W4 H (out) H (in) H1 H2 H3 H4 mattress (kg) Bed Size (mm)

BF-4.1.1 S-BS-CS09D 2420 1652 1602 1850 1800 2333 2157 2132 2107 2297 2261 35~37 Double Bed
(+150) 1500*2000

www.ecoware.com.my Bed Fittings 7.6

wardrobe &
cabinet door

hardware

WCDH-2.2

BC

A

(Hexagon Spanner)

ACC FOR CONCEAL DOOR STRAIGHTENER USE

Model Code Size (mm)
AB

WCDH-2.3.1 DR-CDS-ACC 200 105

C

* RECOMMEND ROUTER BIT TO BE USED 6

Can Cut To 250mm 2440 / 2780mm Can Cut To 60mm
250mm
60mm

(Adjustable)

“ARDEN” TRACK BIT - #280

Code Size (mm) C
AB 1/2”

RB-A227420 10.75 17

CONCEAL DOOR STRAIGHTENER

Model Code Length (mm) Material Colour
2440 Aluminium Gold
WCDH-2.2.1 DR-CDS-2.44 2780 Aluminium Gold

WCDH-2.2.2 DR-CDS-2.78

8.1 Bed Fittings Demonstration Video
www.ecoware.com.my

WCDH-1.16

Features:

- Patent product.
- Original design with concealed damper in top panel 18mm.
- With comfortable and soft closing function, improve the level of

furniture and expand the life of furniture.
- With best silent performance by high quality German imported

POM material runner, which is high-strength ball bearing runner.
- Easy installation design, adjustable function to get the best balance

between door panels.
- Soft closing system with restotation function, and anti-jumped, and

automatic hook coupling function (anti-decoupling).
- Single side soft closing system or 2 sides soft closing for optional.
- Easy installation of aluminium track.

H06 SINGLE SLIDING DOOR ROLLER WITH DAMPER Installation Video
Loadpinegr dCoaopracity
Model Code Material Finish Length Door Width Door Height
500~1200mm ≤2500mm 15kg
WCDH-1.16.1 DR-H06 - --
- - -
WCDH-1.16.2 DR-T-H06 Aluminium NA 3000mm - -
-
WCDH-1.16.3 DR-H06-ACC - --

ACCESSORIES: INSTALLATION:

Description Qty (Per Door) Drawing Full overl ay

ROLLER 1 SET (4PCS) L 1+ 25 .5 L1 L1 +2 5.5

DAMPER 1 SET (2PCS) Half overl ay
3
18.7 L1 +1 5 L1 L1 +1 5
3
ALUMINIUM 1PC (3000mm) 18.5 L1 L1 +2 5.5
TRACK 1 SET (4PCS)
1SET (4PCS) L 1+ 25 .5
SLIP 1 SET (16PCS)
PRVENTION ORDER GUIDELINE: .

FITTING Q1: How many door for your cabinet?
ANS: 2 doors.
CAP FOR Example: If 2doors, you need to buy 2 set of
ALUM TRACK

END CAP

PLASTIC
FITTING

ALLEN KEY 1PC Q2: How many layer and how width of your cabinet?
ANS: 5 layers and 1.5 meter for one layer.
Example: 6 pieces x 1.5meter, so you need to buy 3 pieces of
& 6 sets of .

SCREW 1 SET (16PCS)

8.2 Bed Fittings www.ecoware.com.my

WCDH-1.17

Features:

- External installation, no cutting or grooveing needed.
- Concealed damper with re-set function.
- Damper with Anti jump and Anti-decoupling function.
- Loading capacity: 50kg/door.
- Apply to thickness of wooden door: T≤20mm.
- Apply to thickness of Alum Frame door: T≤34mm.

Demonstration Video

H09 CABINET SLIDING DOOR ROLLER WITH DAMPER - 2DOOR Installation Video
Loading Capacity
Model Code Door Thickness (mm) Door Width (mm) Door Height (mm)
per door
WCDH-1.17.1 DR-H09-2 ≥16 500 ≤1200 ≤ 2500 50kg
Model Code Material Finish Length (mm)
3000
WCDH-1.17.2 DR-T-H09 Aluminium NA
Drawing
ACCESSORIES: Qtcylo(sDeo)u2bDleoosor ft Drawing Description Qtcylo(sDeo)u2bDleoosor ft
Description

TOP ROLLER 4 TOP TRACK 1
(3 METER)

BOTTOM ROLLER 4 BOTTOM TRACK 1
DAMPER 4 (3 METER) 1
1
ALLEN KEY DECORATION
CAP FOR DOWN

TRACK
(3 METER)

SPACER 8
32
St4 X 14 CROSS
FLAT HEAD SELF
TAPPING SCREWInstallation guide for wooden door

INSTALLATION GUIDE FOR INSTALLATION GUIDE FOR
100 ALUMINIUM FRAME DOOR:
WOODEN DOOR: Damper 100 100 10 0
Damper

Door height h1=H- 32 16
Ins ide height of wardrobe =H

Door height h1= H- 32
Insi deheight of wardrobe =H
Upper/ Down f rame HD711 9

T 20

38 Middle f rame 16 .4
73.1 HD712 0

Upper rail 38 14.1 40 16 .4 40 40
Down rail 69.1 6 6 40
www.ecoware.com.my
8.3 Pr o le handle HD711 8

Bed Fittings

WCDH-1.18

Features:

- Concealed sliding door system.
- Damper auto position.
- Easy installation.
- Comfortable and safe function.
- Improve furniture level and service life.

H18 SLIDING ROLLER WITH 4 DAMPER - 2 DOOR

Model Code Door Thickness (mm) Door Width (mm) Door Height (mm) Loading Capacity
≤ 2500 per door
WCDH-1.18.1 DR-H18-2 ≥16 500 ≤1200 ≤50kg
Model Code Material Finish
Length (mm)

WCDH-1.18.2 DR-T-H18 Aluminium NA 3000

ACCESSORIES: Qctylo(sDeo)u2bDleosoorft Drawing Measurement between door & cabinet
Description

RUNNER 4 SET
(8 PCS)

DAMPER 4 PCS

END CAP 8 PCS

ALLEN KEY 1 PC

CROSS 36 PCS Track hole size (Upper panel or Lower panel)
TAPPING 1 PC (3700MM)
SCREWS

ALUMINIUM
TRACK

8.4 Bed Fittings www.ecoware.com.my

WCDH-1.22

Features:

- Great function for heavy door sliding system.
- Soft smooth silent when door slide.

Pic Shown As 3 Door Above Picture Shown As 2 Door

H08 HANGING SLIDING DOOR WITH DAMPER * USE TRACK REFER NEXT PAGE Installation Video

Model Code Door Width (mm) Door Thickness (mm) Loading Capacity per door Doors
700-1500
WCDH-1.22.1.1 DR-H08-2-30 700-1500 18-28 30kg 2
700-1500
WCDH-1.22.2.1 DR-H08-3-30 700-1500 18-28 30kg 3

WCDH-1.22.1.2 DR-H08-2-60 18-28 60kg 2

WCDH-1.22.2.2 DR-H08-3-60 18-28 60kg 3

*Discontinue Item www.ecoware.com.my
8.5 Bed Fittings

WCDH-1.21.5

14.80

35.80

WCDH-1.21.6

10.70

30.20

H08 ALUMINIUM TOP TRACK * All Measure in (mm)
Model
Code Material Finish Length
WCDH-1.21.5 DR-T-H08-T-3.0-A 3000
WCDH-1.21.6 DR-T-H08-T-3.0-B Aluminium NA 3000

WCDH-1.21.3 Aluminium NA

34.90

42.60

H03 BOTTOM TRACK * All Measure in (mm)
Model
Code Material Finish Length
WCDH-1.21.3 DR-T-H03-B-3.0 3000
Aluminium NA

8.6 Bed Fittings www.ecoware.com.my

DIMENSION SPECIFICATION

W1=W/2+10

8.7 Bed Fittings www.ecoware.com.my

WCDH-1.23 Features:

- Two doors close in one piece, neat looking.

- Double soft closing function.

- Brush on runners, smooth and silent. Demonstration 1 Video

Demonstration 2 Video

H11 IN-LINE SLIDING DOOR SYSTEM - 2 DOOR Installation Video
Loading Capacity per door
Model Code Cabinet Width (mm) Door Thickness (mm)
1800 18-45 60kg
WCDH-1.23.1 DR-H11-1.8 2400 18-45 60kg

WCDH-1.23.2 DR-H11-2.4

ACCESSORIES: Qty (Per Door) Drawing
1 SET
Description 1 SET
TOP TRACK 1 SET
BOTTOM TRACK 1 SET
LEFT BOTTOM ROLLER 1 SET
RIGHT BOTTOM ROLLER 2 PCS
BOTTOM ROLLER 2 PCS
REGULATOR 8 PCS
REGULATOR 8 PCS
BOTTOM TRACK FIXED BLOCK
BOTTOM TRACK LOCKED BLOCK

8.8 Bed Fittings www.ecoware.com.my

LEFT DOOR T = SIDE PANEL THICKNESS
A = INNER WIDTH OF CABINET
D = GAP BETWEEN TWO DOORS(3-5MM)
E = GAP BETWEEN SIDE PANEL AND DOOR
C = DOOR WIDTH

RIGHT DOOR

CABINET REQUIREMENT DOOR THICKNESS 18-45MM (HANDLE INCLUDED)

8.9 Bed Fittings www.ecoware.com.my

WCDH-1.28 Features:

- Two side soft closing function.
- Loading capacity: max 40kg / door
- Material: Galvanized Sheet
- Apply to thickness of door: 21-28mm

H12 HANGING SLIDING ROLLER WITH 4 DAMPER - 2 DOOR

Model Code Material Door Thickness (mm) Loading Capacity per door Doors
21-28 max 40kg 2
WCDH-1.28.1 DR-H12-2 Galvanized Sheet
Qty
ACCESSORIES: 2 Pcs

Description Drawing

Upper Runner For Outer Door

Down Runner For Outer Door 2 Pcs

Upper Runner For Inner Door 2 Pcs

Down Runner For Inner Door 2 Pcs

Stopper I 2 Pcs

Stopper II 2 Pcs

Stopper III 2 Pcs

Srew & Nut 2 Pcs

Plastic Fitting 1 Pc

8.10 Bed Fittings www.ecoware.com.my

ACCESSORIES: Qty Drawing
2 Pcs
Description 2 Pcs
Damper For Inner Door 2 Pcs
2 Pcs
Damper For Outer Door 4 Pcs
4 Pcs
Short Guide For Upper Runner of Inner 4 Pcs
Door 4 Pcs
4 Pcs
Long Guide For Upper Runner of Outer 1 Pc
Door 4 Pcs
1 Pc
Fixed Plate

Screw I

Screw II

Screw III

Screw IV

Allen Key

Stopper For Damper of Inner Door

Position Template For Installation
of Damper

8.11 Bed Fittings www.ecoware.com.my

WCDH-1.28.2

52

H12 3.0MT ALUMINIUM TOP TRACK 32

Model Code Material * All Measure in (mm) Length
Aluminium Finish 3000
WCDH-1.28.2 DR-T-H12-T-3.0 NA

WCDH-1.28.3

24 32.20

H12 3.0MT ALUMINIUM BOTTOM TRACK 45 Length
3000
Model Code Material * All Measure in (mm)
Aluminium Finish
WCDH-1.28.3 DR-T-H12-B-3.0 NA

8.12 Bed Fittings www.ecoware.com.my

2 Doors (1 Inner, 1 Outer) (Inner Door) (Outer Door)
Top View
Installation for upper limit position
Cabinet Reference Table
Installation for down limit position
Open hole diagram (Only use for inner door)

Sectional Side diagram

Outer Door Inner Door Door
MAX 40 KG MAX 40 KG Gap

Push up down
runner for outer
door on the bottom
track

Plastic Fitting

Installation of Rotate it to the highest
plastic fitting position after installation of
inner door.

Installation of stopper After installation of outer door,
push it to the limit point based
on the direction.

8.13 Bed Fittings www.ecoware.com.my

Optional: Installation of sliding door with aluminium angle handle
- Upper and down runner for inner and outer door required to pad

with square piece
- H = Thickness of square piece

Aluminium Angle Handle

Damper for Outer
Door

Fixed Plate Screw II Damper for Outer
Door

Damper for Inner Screw III Screw II Stopper for damper of
Door Screw IV inner door

Screw I Fixed Plate

Screw III Stopper for damper
of inner door

Damper for Inner
Door

Screw IV

Screw IV

Screw IV

Fix it after installing the outer door, then adjust to the
best position and tighten the long guide.

Short guide used for upper runner of
inner door, with three screw holes in
the last row.

Fix it after installing the inner door,
then adjust to the best position and
tighten the short guide.

8.14 Bed Fittings www.ecoware.com.my

WCDH-1.27 Features:

- Soft smooth silent when door slide
- Screw drivers can adjust from sides easily

H22 HANGING SLIDING ROLLER WITH DAMPER Installation Video DR-H22-2 Installation Video DR-H22-3

Model Code Door Width (mm) Door Thickness (mm) Loading Capacity per door Doors

WCDH-1.27.1 DR-H22-2 700-1500 16-46 30-80kg 2

WCDH-1.27.2 DR-H22-3 700-1500 16-46 30-80kg 3

ACCESSORY COMPONENT ACCESSORY COMPONENT
02 Doors 03 Doors 02 Doors 03 Doors
Upper Roller Upper Roller
For Outer 01 01 For Inner 01 02
Door (Left) Door (Left)
01 01 01 02
Upper Roller Upper Roller
For Outer 02 02 For Inner 02 04
Door (Right) Door (Right)

Down Roller For Down Roller For
Outer Door Inner Door

Damper For Stopper For 0 01
Upper Roller 04 06 Anti-collide

Damper For Down Device For Anti 01 02
Roller 04 04 Pinch

Stopper For ST4*16 Cross 40 60
Upper Damper 04 04 Ressesed Flat Head 01 01

Tapping Screws

Position Template

8.15 Bed Fittings www.ecoware.com.my

WCDH-1.27.3

14

73.80

H22 3.0MT ALUMINIUM TOP TRACK * All Measure in (mm)
Finish
Model Code Material NA Length
Aluminium 3000
WCDH-1.27.3 DR-T-H22-T-3.0

WCDH-1.27.4

43

H22 3.0MT ALUMINIUM BOTTOM TRACK 46.80

Model Code Material * All Measure in (mm) Length
Aluminium Finish 3000
WCDH-1.27.4 DR-T-H22-B-3.0 NA

8.16 Bed Fittings www.ecoware.com.my

Single door width: 700 - 1500 mm;
Single door loading capacity: 30 - 80 kgs;
Single door thickness: 16 - 46 mm

8.17 Bed Fittings www.ecoware.com.my

8.18 Bed Fittings www.ecoware.com.my

WCDH-1.24 Features:

- Damper with Anti jumping and Anti-decoupling function.
- Auto reset function, easy adjustment.
- Imported POM material for wheel, to achieve best silent

performance and long lifespan.

H15 FOLDING CABINET DOOR WITH DAMPER FOR 2 DOOR USE Demonstration Video Installation Video

Model Code Material Door Width (mm) Door Height (mm) Door Thickness (mm) Loading Capacity per door

WCDH-1.24.1 DR-H15-R Iron + Plastic 300-600 900-1800 ≥ 16 20kg
Finish Length (mm)
Model Code Material

WCDH-1.24.2 DR-H15-TB-3.0 Aluminium NA 3000

WCDH-1.24.3 DR-H15-TT-3.0 Aluminium NA 3000

25.70 25

55.60 46.10
Upper Rail Down Rail

8.19 Bed Fittings www.ecoware.com.my

8.20 Bed Fittings www.ecoware.com.my

8.21 Bed Fittings www.ecoware.com.my

WCDH-1.25.1

Features:

- Strong bearing rail, it is not necessary to fasten top plate.
- The wheel with spring can balance the bending of top plate.
- It is not necessary to the guide part of bottom.

X10

X2
X2
X10
X2

H04 F3023 FOLDING DOOR SET (HEAVY DUTY) - FOR ENTRANCE DOOR USE

Model Code Door Width per Door Height per Door Thickness Loading Capacity Package
folding door (mm) folding door (mm) (mm) per folding door
12-35 2 door (Left)
WCDH-1.25.1 DR-H04-R-3023 800-1200 2000-3000 25kg 2 door (Right)

8.22 Bed Fittings www.ecoware.com.my

WCDH-1.25.2

H04 F3023 FOLDING DOOR TRACK (HEAVY DUTY) - FOR ENTRANCE DOOR USE * All Measure in (mm)

Model Code Material Finish Length

WCDH-1.25.2 DR-H04-T-3023 Aluminium NA 3000

WCDH-1.25.3

CONCEAL HINGE FOR H04 F3023 FOLDING DOOR USE

Model Code Material

WCDH-1.25.3 DR-H04-R-3023-ACC Zinc Alloy

8.23 Bed Fittings www.ecoware.com.my

8.24 Bed Fittings www.ecoware.com.my

Features:

- Easy to put the wheel off and fold the door.
- The locking action can make two guide wheels balance the door.
- Not necessary to use tool to link with the door.

WCDH-1.26.1 WCDH-1.26.2 Installation Video

LEFT RIGHT

X1 X1
X4
X4 X1 X4
X1 X4

X1 X1

H05 F3013 FOLDING DOOR (FOR CABINET DOOR USE 2 DOOR)

Model Code Door Width (mm) Door Height (mm) Door Thickness (mm) Loading Capacity Side
per folding door
WCDH-1.26.1 DR-H05-R-3013-L Max 1000 Max 2200 Max 25 Left
WCDH-1.26.2 DR-H05-R-3013-R Max 1000 Max 2200 Max 25 40kg Right
40kg
WCDH-1.26.3

TOP

WCDH-1.26.4

BOTTOM

H05 F3013 FOLIDING DOOR TRACK - FOR CABINET DOOR USE * All Measure in (mm)

Model Code Material Finish Length
3000
WCDH-1.26.3 DR-H05-TT-3013 Aluminium NA 3000

WCDH-1.26.4 DR-H05-TB-3013 Aluminium NA www.ecoware.com.my

8.25 Bed Fittings

Folding door 2 panels
Panel width max.1000mm
Door weight/panel max.10kg
Door height max.2200mm

8.26 Bed Fittings www.ecoware.com.my

81.27 BDeradwFeitrtSinlgidse & Drawer System wwwwww..eeccoowwaarree..ccoomm..mmyy

For doors that pivot and slide in sideways For doors that fold and slide in sideways
Hawa Concepta 25/30/40/50 Hawa Folding Concepta 25

For flexible combinations For further combination options
Hawa Concepta 25/30/40/50 and Hawa Concepta 25/30/40/50 and
Hawa Folding Concepta 25 Hawa Folding Concepta 25

www.ecoware.com.my Drawer Slide & Drawer System 8.28

Area of application Technical specifications
max. 25 / 30 / 40 / 50 kg
Furniture constructions for multi-functional room usage such as working areas, washer/ 1250 – 2850 mm
dryer combinations, cabinets which can be walked into without obstructions, and even 300 – 900 mm
entire kitchens which disappear behind pivot slide-in doors. 19 – 50 mm

System advantages Good to know (accessories)
– Connector makes overlaid
Flexibility Easy adaptation for wide range of door dimensions
Can be combined with Hawa Folding Concepta to create three-leaf furniture structures possible
front panels without separating walls – Straightening tting for

Productivity Efficient installation, because all components are screwed to the doors
intermediate panel

Comfort No obstruction by protruding doors
Guide with zero clearance and door pull-in with soft closing mechanism
Intermittent guide brushes for various door widths

Aesthetics Elegant flush-fitting, floor-to-ceiling and walk-in
construction versions possible

Installation examples Hawa Concepta 25/30 Hawa Concepta 25/30

Hawa Concepta 25/30

Door striking against the shelf and cabinet top Inset door Floor-to-ceiling door, walk-in

Product range Hawa Concepta 25/30 Hawa Concepta 25/30
Hawa Concepta 25/30 Hawa Concepta 40/50 Hawa Concepta 40/50
Hawa Concepta 40/50

8.29 Drawer Slide & Drawer System www.ecoware.com.my

25

Fitting for pivoting and lateral sliding in of wooden doors up to 25 kg (55 lbs.).
Enables multi-functional room design, paired with a flush-fitting design.

Product highlights

Flexibility Tremendous exible door dimensions provides
a high degree of design freedom

Comfort Easy, quiet operation thanks to soft closing
mechanism and hinges with integrated soft closing
mechanism

Technical specifications

Max. 10–25 kg (22 to 55 lbs.)

Max. 1250–1850 mm (4'1 7/32'' to 6' 27/32'')

Max. 300–750 mm (11 13/16'' to 2'5 17/32'')

19–50 mm (3/4'' to 1 31/32'')

Installation examples
Door striking against the top and bottom cabinet sections

www.ecoware.com.my Drawer Slide & Drawer System 8.30

25

Set for 1 pivot /slide-in door up to 25 kg (55 lbs.) Table continued from previous column

Hawa Concepta 25, for 1 door No. Stop cover cap 1 27657
27648 Hawa Concepta, 1 27658
depth adjustable, 24739
Set consisting of: 27648 No. top left/bottom right 24533
22055 24661
Upright, 1800 mm 25656 Stop cover cap
(5’10 7/8"), aluminum, Hawa Concepta,
anodized depth adjustable,
top right/bottom left

Cover plates, stainless steel, 1
1 pair
1

Upright guide, rattle proof, Bottom guide channel, 2
with plastic rollers 728 mm (2’4 21/32"),
2 aluminum, anodized,
pre-drilled

Torsion plate 1 27704 Stop damper, 1
with retaining bracket

Scissor action complete, 1 22592 Door retractor 25/50, 1 25814
900 mm (2’11 7/16"), steel, 25592 with damper, plastic, black 25862
galvanized 22451

Front scissor guide, Soft closing system for 1
aluminum, anodized end position, with cover
1 caps, plastic, black

Rear scissor guide, Screw set, 4,5x20 mm 1
aluminum, anodized (25/32"), set of 22 pieces
1 25596
25855
Rear scissor bearing, 27654 Allen key, with handle, 1 13164
55 mm (2 5/32"), 25935 3 mm (1/8")
steel, galvanized 1 22861
25562
Concealed hinge, 25815 Installation aid, plastic, red 1 25816
with damper, steel,
galvanized, 3 piece-set 1

Set of screws for concealed 1 Cabinet connecting profile mm No.
hinges, 4x16 mm (5/8"), (inch)
set of 10 pieces Connector 55 mm 25438
(2 5/32''), for one 650
Spacer pro le, 860 mm 1 pivot/slide-in door, 23221
(2’9 27/32"), pre-drilled, aluminum, plain (2' 1 19/32'') 23222
plastic, black anodized, 2 pieces 23223
650 23224
Set of screws for spacer 1 Connector 55 mm 23225
pro le, PH 4x16 mm (5/8"), (2 5/32''), for one (2' 1 19/32'')
set of 7 pieces pivot/slide-in door, No.
aluminium, anodized, 900 25680
Brush guide, plastic, black, 1 1 piece
set of 3 pieces (2' 11 7/16'')
Connector 110 mm
Continued table on next column (4 11/32''), for two 650
pivot/slide-in doors,
aluminium, anodized, (2' 1 19/32'')
1 piece
900

(2' 11 7/16'')

26

(1 1/32'')

Guides

Guide for two inset
pivot sliding doors,
aluminum

8.31 Drawer Slide & Drawer System www.ecoware.com.my

25

Further installation examples Door in wall niche
Inset door
Door thickness 31–50 mm (1 7/32'' to 1 31/32'')
Fitting depth calculations
Weight and door size ratio calculations
www.ecoware.com.my The maximum weight must be adapted depending on
the door size ratio.
TH TB 300 350 400 450 500 550 600 650 700 750

1850 25 25 25 25 25 25 25 24 23 22
1800 25 25 25 25 25 25 25 23 22 21
1750 25 25 25 25 25 25 24 22 21 21
1700 25 25 25 25 25 25 24 21 21 20
1650 25 25 25 25 25 25 23 21 20 19
1600 25 25 25 25 25 24 22 20 19 18
1550 25 25 25 25 25 24 21 19 18 18
1500 25 25 25 25 25 23 21 18 18 17
1450 25 25 25 25 24 22 20 18 17 16
1400 25 25 25 25 24 21 19 17 16 15
1350 25 25 25 24 23 21 18 19 16 15
1300 25 25 25 24 22 20 18 15 15 14
1250 25 25 24 23 21 19 17 15 14 13
Door weight in kg/TB = Door width in mm/TH = Door height in mm

Drawer Slide & Drawer System 8.32

30

Fitting for pivoting and lateral sliding in of wooden doors up to 30 kg (66 lbs.).
Enables multi-functional room design, paired with a flush-fitting design.

Product highlights

Flexibility Tremendous exible door dimensions provides
a high degree of design freedom

Comfort Easy, quiet operation thanks to soft closing
mechanism and hinges with integrated soft closing
mechanism

Technical specifications

Max. 15-30 kg (33 to 66 lbs.)

Max. 1851–2300 mm (6' 7/8 '' to 7'6 9/16'')

Max. 300–900 mm (11 13/16'' to 2'11 7/16'')

19–50 mm (3/4'' to 1 31/32'')

Installation examples
Door striking against the top and bottom cabinet sections

8.33 Drawer Slide & Drawer System www.ecoware.com.my

30

Set for 1 pivot /slide-in door up to 30 kg (66 lbs.) Table continued from previous column

Hawa Concepta 30, for 1 door No. Stop cover cap 1 27657
27649 Hawa Concepta, 1 27658
depth adjustable, 1 24739
Set consisting of: 27649 No. top left/bottom right 2 24535
24699 1 24660
Upright, 2300 mm 1 25656 Stop cover cap
(7’6 9/16"), aluminum, Hawa Concepta,
anodized depth adjustable,
top right/bottom left
Upright guide, rattle proof, 2
with plastic rollers Cover plates,
stainless steel, 1 pair
Torsion plate 1 27704
Bottom guide channel,
896 mm (2’11 9/32"),
aluminium, anodized,
pre-drilled

Stop damper,
with retaining bracket

Scissor action, complete, 1 22593 Door retractor 30/40, 1 25813
galvanized steel with damper, plastic, black 25862
22451
Front scissor guide, 1 25592 Soft closing system for 1
aluminum, anodized end position, with cover 1
caps, plastic, black
Rear scissor guide, 1 25596
aluminum, anodized 25855 Screw set, 4,5x20 mm
27654 (25/32"), set of 22 pieces
25935
Rear scissor bearing, 22861 Allen key, with handle, 1 13164
55 mm (2 5/32"), 25562 3 mm (1/8")
steel, galvanized 1 25815

Concealed hinge, 1 Installation aid, plastic, red 1 25816
with damper, steel,
galvanized, 3 piece-set

Set of screws for concealed 1 Cabinet connecting profile mm No.
hinges, 4x16 mm (5/8"), (inch)
set of 10 pieces Connector 55 mm 25438
(2 5/32''), for one 650
Spacer pro le, 860 mm 1 pivot/slide-in door, 23221
(2’9 27/32"), pre-drilled, aluminum, plain (2' 1 19/32'') 23222
plastic, black anodized, 2 pieces 23223
650 23224
Set of screws for spacer 1 Connector 55 mm 23225
pro le, PH 4x16 mm (5/8"), (2 5/32''), for one (2' 1 19/32'')
set of 7 pieces pivot/slide-in door, No.
aluminium, anodized, 900 25680
Brush guide, plastic, black, 1 1 piece
set of 3 pieces (2' 11 7/16'')
Connector 110 mm
Continued table on next column (4 11/32''), for two 650
pivot/slide-in doors,
aluminium, anodized, (2' 1 19/32'')
1 piece
900

(2' 11 7/16'')

26

(1 1/32'')

Guides

Guide for two inset pivot sliding
doors, aluminum

www.ecoware.com.my Drawer Slide & Drawer System 8.34

30 Door in wall niche

Further installation examples Door thickness 31–50 mm (1 7/32'' to 1 31/32'')
Inset door
Weight and door size ratio calculations
Fitting depth calculations The maximum weight must be adapted depending on
the door size ratio.
TH TB 300 350 400 450 500 550 600 650 700 750 800 850 900

2300 30 30 30 30 30 30 30 30 30 30 29 27 26
2250 30 30 30 30 30 30 30 30 30 30 28 27 25
2200 30 30 30 30 30 30 30 30 30 29 27 26 24
2150 30 30 30 30 30 30 30 30 30 29 27 25 24
2100 30 30 30 30 30 30 30 30 30 28 26 25 23
2050 30 30 30 30 30 30 30 30 29 27 25 24 23
2000 30 30 30 30 30 30 30 30 29 26 25 23 22
1950 30 30 30 30 30 30 30 29 27 26 24 23 21
1900 30 30 30 30 30 30 30 29 27 25 23 22 21
1851 30 30 30 30 30 30 30 28 26 24 23 21 20
Door weight in kg/TB = Door width in mm/TH = Door height in mm

8.35 Drawer Slide & Drawer System www.ecoware.com.my