HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 1 HANDBOOK for FTTH-OSP v 1.0 (June 2013) HANDBOOK For Outside Plant- Outside Plant-Fiber to the Home Fiber to the Home (FTTH-OSP) For PT TELKOM INDONESIA V 1.0 <REFERENCE ｆor DESIGN, WORK IMPLEMENTATION & TESTING> WORK IMPLEMENTATION & TESTING> (June 2013)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 2 HANDBOOK for FTTH-OSP v 1.0 (June 2013) Contents PART-I DESIGN & INSTALLATION ........................................................................ 4 FTTH-OSP DESIGN PRINCIPLES .......................................................................... 5 MATERIALS FOR FTTH-OSP (STO - ODP) .......................................................................... 7 MATERIALS FOR FTTH-OSP (HRB: Hign-Rise Building) ......................................................... 8 1. FEEDER CABLE DESIGN ++++++++..+++.+++++++... 11 1.1 Google Map /////////.......................................... 11 1.2 Skema Kabel Feeder ////..///////////.............../. 12 1.3 PetaLokasi Duct & Kabel Feeder //////////.///..///////. 15 1.4 Sample Design of Feeder Cable Network /////.//.//////////............. 15 1.5 Core Assignment Diagram /////////././///.//////.. 19 1.6 General Concept for Feeder Cable Design /////./..///////////............ 22 2. DISTRIBUTION CABLE DESIGN ++++++++.+++++++++++ 25 2.1 Google Map ////////..////////////... 25 2.2 Skema Kabel Distribusi /////////..//////////// 25 2.3 Sample Design of Distribution Cable Network /////.////////////............ 28 2.4 Branching ODP //////..////////////.......... 32 2.5 Duct Usage for Distribution Network & Drop-core Installation (Underground) .......................... 33 3. GENERAL CONCEPT FOR DISTRIBUTION CABLE DESIGN ++++++++............. 34 3.1 Duct / Buried Section /////.////////////............... 34 3.2 Aerial Section /..////////////............................ 37 4. CABLE RACK / OTB RACK IN STO BUILDING +++++..+++.+++++++++ 41
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 3 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 5. HIGH-RISE BUILDING (HRB) DESIGN ......................................................................... 42 5.1 Materials for HRB Solution /////////........................................... 42 5.2 Design Concept for HRB Solution ////..///////////.............../.. 43 5.3 Type of ODC for High-Rise-Building //////////.///..///////.. 44 5.4 Example of Cable Tray/Trunking /////.//.//////////............. 45 5.5 Sample Design: Skema Distribusi /////////././///.//////.. 46 5.6 Sample Design: Peta Lokasi Distribusi /////./..///////////............ 47 6. REFERENCE ++++++++.+++++++++++ 50 6.1 Pondasi ODC-C-144 Splitter ////////..////////////... 51 6.2 Pondasi ODC-C-288 Splitter /////////..///////////... 52 6.3 Pondasi ODP Pedestal & HH-PIT-60 /////.////////////.............. 53 6.4 HH-1: Dimensi Dalam (P=1700 x L=1250 x T=1300) .../..////////////.......... 54 6.5 HH-2: Dimensi Dalam (P=1200 x L=600 x T=1300) .............................................................. 55 6.6 HH-80: Dimensi Dalam (P=800 x L=800 x T=800) .............................................................. 56 6.7 Installation of ODP Wall ............................................................................ 57 6.8 Form for Core Assignment Diagram ............................................................................ 59 6.9 Installation Check Sheet ............................................................................ 63 6.10 List of Assembly Unit Designator ............................................................................ 67 PART-II ACCEPTANCE TESTING ........................................................................ 73 1. TEST PROCEDURE +++++++++++................................ 74 2. OPM MEASUREMENT ......................................................................... 86 2.1 Application of Measurement Forms /////.////////////............... 87 2.2 Measurement Forms /..////////////............................ 92
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 4 HANDBOOK for FTTH-OSP v 1.0 (June 2013)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 5 HANDBOOK for FTTH-OSP v 1.0 (June 2013) FTTH-OSP DESIGN PRINCIPLES (1) 1. FTTH OSP Design Work (Feeder & Distribusion) shall be carried out in accordance with the frame of this document. 2. LINK BUDGET 1) Descriptions in the Contract: The Design shall ensure the FTTH OSP System Power Budget of the GPON OLT to ONU (in the configuration of 1:4 Splitter at ODC and 1:8 Splitter at ODP) shall be 28dB (including the margin of 3dB). 2) Applicable Power Budget in the Project: Contract Requirement: 28dB - 3dB (Margin) = 25dB (ITU-T G.652D @ Wave Length 1310nm=0.35dB/km) Requirement by KBB: 25dB - 2dB = 23dB (including 2dB as an Additional Margin due to an incidental increment of the loss in OSP during an operation) Link Budget to be applied for the Project: 25dB @ 1310nm We may try however, to keep 23dB @ 1310nm as far as practicable.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 6 HANDBOOK for FTTH-OSP v 1.0 (June 2013) FTTH-OSP DESIGN PRINCIPLES (2) 3. FTTH OSP Design shall be composed of the following: 3.1 Feeder Cable Design 1) Google Map per STO 2) Skema Kabel Feeder (Schematic Drawing) 3) Skema Duct (Schematic Drawing) 4) Peta Lokasi Duct & Kabel Feeder (Location Map) 5) Special Design (MH Modification, Duct Bridge etc.) 3.2 Distribution Cable Design 1) Google Map per Lokasi 2) Skema Kabel Distibusi 3) Peta Lokasi Distribusi 4) Special Design (HH Modification, Modified ODP Foundation etc.)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 7 HANDBOOK for FTTH-OSP v 1.0 (June 2013) Feeder Cable DC-OF-SM12D/24D/48D/ 96D/144D/288D ODC ODC-C-48/144/288 Splitter Note: ODC-C-48 = Wallmount Type Pass through closure Type/Designator for 48core Star/Ring SC-OF-SM-PT-48 for 96core Star/Ring, 144core Star SC-OF-SM-PT-144S for 144core Ring SC-OF-SM-PT-144R for 288core Star SC-OF-SM-PT-288S for 288core Ring SC-OF-SM-PT-288R Inline closure Type/Designator for 12c-24c SC-OF-SM-24 for 12c-48c SC-OF-SM-48 for 12c-96c SC-OF-SM-96 for 12c-144c SC-OF-SM-144 for 12c-288c SC-OF-SM-288 STO ODC ODP (Aerial) ODP-SSW-8 (1:8 Splitter built-in) Branching ODP (Pole/Wall Mount) ODP-PW-BR Branching ODP (Pedestal) ODP-PL-BR ODP (Wall Mount) ODP-PW-8/16 Distribution Cable (Aerial) AC-OF-SM-8/12/24-SC ODP (Pedestal) ODPPL-8/16 Distribution Cable (Duct) DC-OF-SM-8/12/24-SC Passive Splitter PS-1-2-ODC/ PS-1-4-ODC PS-1-8-ODP Line Guard/ Suspension C-Clamp Materials for FTTH OSP (STO - ODP) OTB TC-OF-SM12/24/48/72/96/144
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 8 HANDBOOK for FTTH-OSP v 1.0 (June 2013) Cable Trunking and Accessories Splitter for ODC-HRB PS-1-4-ODC-HRB Materials for FTTH-OSP (HRB: High-Rise Building) ODC-HRB (Cabinet) ODC-HRB-420 ODC-HRB-240 ODC-HRB-180 ODC-HRB(Rack) ODC-HRB-RACK-480 ODC-HRB-RACK-240 ODC-HRB-RACK-120 19 inch Rack TC-OF-R-19 or Indoor Cable (1-C Low Friction) IC-OF-SM-1D ODC-HRB ODP-HRB ODP-HRB-16/32 PS-1-8-ODP-HRB Indoor Cable (2-C Low Friction) IC-OF-SM-2D ROSETTE RS-IN-SC-1P/ TC-MK-SC-1P FUSE-CONNECT ISC-UPC-FD Cable Trunking Elbow (Flat Angle) T-Joint
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 9 HANDBOOK for FTTH-OSP v 1.0 (June 2013) LIST OF MATERIALS AND INSTALLATION MANUALS (1/2) As of: 01-June-2013 No. Spec.No. Manual.No. Sub manuals 1 - 5. ESMDDLT000*****K 6 ESMDDLT00028824K 7 - 8. JBT-05166A 9 - 12. ESMDALT0000****K 13-16 ENZDSCDLT0*****K 17 - 20 ENZDSCALT00****K 21-23 ESMDDLT0000****K 24 JBT-05027B 25 - 26 JBT-05026-> JBT-05391 49 - 50 JBT-04109A 51 - 52 JBT-04770D 53 - 54 JBT-04109A 55 - 56 PNJHC-1101-54-02(2.8mm) 57 - 75 TS1211-01 76 - 78 PNJBC-0516-54-03 PNJBC-0516-82-01 ODC-C sub manual_130214 79 PNJBC-0516-54-04 PNJBC-0516-82-01 ODC-C sub manual_130214 80-81 PNJCS-0013-54-10 82 - 83 PNJCY-0085-54-03 PNJCY-0085-82-01 ODP-CA sub manual_130323 84 - 87 PNJBC-0516-54-06 88 - 89 JEMBO Pedestal + ODP-CA PNJCY-0085-82-01 90 - 95 PNJBC-0516-54-07 PNJBC-0516-82-04 TC-SM sub manual_130225 96 PNJBC-0470-54-04 PNJBC-0470-82-02 97 PNJBC-0472-54-08A 98 PNJBC-0516-54-08 99-101 PNJBC-0516-54-09 PNJBC-0516-82-06 102 - 106 PNJBC-0516-54-10 107 - 111 PNJSC-1077-54-03Rev.1 112 - 116 PNJBC-0516-54-11 117 - 121 PNJSC-1077-54-04Rev.1 200 PNJCY-0084-54-02 201 PNJCY-0084-54-01 202 PNJCY-0084-54-04 203 PNJCY-0084-54-03 204 PNJCY-0084-54-05 Manuals will be available upon supply of the material Manauals not applicable DC-OF-SM-*D (SM.D D - LT */*T) DC-OF-SM-*-SC (SM.D D - LT */*T) AC-OF-SM-8-SC (OGGDE-SSW) Name File AC-OF-SM-*D (SM.D A - LT */*T) DC-OF-SM-*C (NZDS.C D - LT */*T) AC-OF-SM-*C (NZDS.C A - LT */*T) DC-OF-SM-288D (SM.D D - LT 288/24T) DC-OF-SM-*D (OG8ETSWBE) AC-OF-SM-*-SC (OGNM4WTGDE-SSW) GC-OF-SM-1D (FR-OGINE) HC-OF-SM-*D (FR-OGNMGDE-SSD) GC-OF-SM-1D (FR-OGINE) Patch cord (2.8mm, BIS-B) Pigtails and Patchcords ODC-C-* Splitter ODC-C-48 Splitter ODC-CU (FSCO-HHS) ODP-CA-* for Pole Mount ODP-A-* ODP-PL-* (Pedestal_Box+ ODP-CA-* For_Wall_mount) TC-SM-* RS-IN-SC-1P (FPB-103A(S)) RS-IN-SC-2P (FPB-302-2SC(PT)) House Hook Cable cleat RS-IN-SC-4P (RS-IN-SC-4) TC-MK-SC-* PS-1-*-ODC (Optical Spitter Module 1 x N Type) PS-1-*-ODP(PLC Type 1xN Splitter) PS-2-*-ODC (Optical Spitter Module 2 x N Type) PS-2-*-ODP (PLC Type 2xN Splitter) Deadending Wire Vice (C clamp) Drop Cable Clamp (S Clamp) Selft-Support Wire Line Guard (Line Guard 2.6mm)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 10 HANDBOOK for FTTH-OSP v 1.0 (June 2013) LIST OF MATERIALS AND INSTALLATION MANUALS 2/2) As of: 01-June-2013 No. Spec.No. Manual.No. Sub manuals 205 PNJCY-0084-54-06 206 PNJCY-0084-54-07 207 PNJCY-0084-54-08 400 - 401 PNJHC-1101-53-01 402 PNJCY-0067-54-18 PNJC-0067-82-04 403 PNJHY-0001-53-11 404 PNJHY-0001-53-10 405 PNJHY-0107-53-05 406 PNJHY-0107-54-21Rev.2 JDAA-11-12-0048D PNJHY-0107-54-21Rev.2 JDAA-11-13-0075 407 PNJBC-0480-54-17 408 PNJBC-0480-54-17 409 PNJBC-0480-54-17 410 B-12F0401 PNJCY-0085-82-03 411 B-12F0401 PNJCY-0085-82-03 412 PNJBC-0085-54-02 PNJCY-0085-82-01 413 PNJBC-0085-54-02 PNJCY-0085-82-01 414 JBT-04260B 415 JBT-04260B 416 417 418 419 420 421 PNJBC-0516-54-12 PNJBC-0516-82-09A 422 PNJBC-0516-54-12 PNJBC-0516-82-09A 423 PNJBC-0516-54-12 PNJBC-0516-82-09A 424 PNJBC-0516-54-13 PNJBC-0516-82-10 425 PNJBC-0516-54-13 PNJBC-0516-82-11 426 PNJBC-0527-54-07 427 PNJBC-1077-54-03Rev.1 Manuals will be available upon supply of the material PS-1-8-ODP-HRB ODP-HRB-16 PS-1-4-ODC-HRB Pass through closureType4 ( For 288core Ring) ODC-HRB-420 ODC-HRB-240 ODC-HRB-180 ODP-HRB-32 Low Friction Indoor Cable , 2C Pass through closureType1 ( For 48core Star/Ring ) Pass through closureType2 ( For 96core Star/Ring ) Pass through closureType3 ( For 144core Ring ) Pass through closureType4 ( For 288core Star) ODP-BR for Branching (3 Hole Type) , Pole mounting type ODP-BR for Branching (3 Hole Type) , termasuk Dome Pedestal ODP Outdoor/Wall , Termasuk Adaptor , Space Passive Splitter, 8 Port ODP Outdoor/Wall , Termasuk Adaptor , Space Passive Splitter, 16 Port Low Friction Indoor Cable , 1C Outdoor Optical Connector Cabinet (FPB-203-*SC-A (PT)) 4 Port L-clamp Flex Band IBT-206 BW-Clamp Free Bending Optical cord (3mm, BIS-B) Outdoor Optical Connector Cabinet (FPB-203-*SC-A (PT)) 1 Port Outdoor Optical Connector Cabinet (FPB-203-*SC-A (PT)) 2 Port ODP-SSW (FSCO-AS-SP(in/splice)) FIELD INSTALLBLE SC CONNECTOR (FAST-SC-SM-09/CO) FIELD INSTALLBLE SC CONNECTOR (FAST (N) -SC-SM-UNI/GT) FUSION CONNECTOR (Fuseconnect-SC-SF-SM-20/30) FUSION CONNECTOR (Fuseconnect-SC-DC) for Drop cable FUSION CONNECTOR (Fuseconnect-SC-LF) for LowFriction cable Name File Manauals not applicable
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 11 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1. FEEDER CABLE DESIGN A. The Feeder Cable Route shall be planned to utilize the existing duct route as the first priority so as to minimize the road excavation length. B. The capacity of Feeder Cables designed/implemented by the previous TOS/PO as well as for the followings shall be taken into account at the Feeder Cable Capacity Planning: 1) AL PRO: Existing Facility such as MSAN, RK, etc. 2) Node B Project 3) GDI: Government Digitalization Network 1.1 GOOGLE MAP 1) Nama STO: legend berbentuk Rumah (Warna Merah) 2) Route Feeder: warna Merah 3) Nama ODC sesuai dengan Lokasi/Cluster 4) Kapasitas ODC/ Jumlah Homepass 5) Boundary ODC/Lokasi/Cluster dg Boundary Area Potensi
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 12 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.2 SKEMA KABEL FEEDER ► Purpose: Information required for the Feeder Cable Work A. OTB at STO OTB to be installed with the symbol Telkom Standard and indicated with the designator in BoQ: Example: TC-OF-SM-xx (yy) B. Feeder Cable Indication: Black Line (New: 0.6 point, Existing: 0.3 point) Information: 1) Type (Duct/Aerial) and capacity of cable 2) Length of cable 3) Core Assignment Note: The younger core number shall be assigned for the far end (the last position) and spare cores (Cadangan). Total Quantity of OTB Type of OTB
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 13 HANDBOOK for FTTH-OSP v 1.0 (June 2013) IDENTIFICATION OF FEEDER CABLE FE XXX 01-01-01 (01-288) Core No. In Cable Segment No. Feeder No. Code STO Code Feeder Cable DC-OF-SM-XXX-xxxxM Cable Length in meter No. Of Cores Type of Cable Duct Cable: DC-OF-SM Aerial Cable: AC-OF-SM Branch-Segment No. Note: Cable Line: New: Tebal (e.g. 6pt.) Existing: Tipis (e.g. 3pt.) Identification: New: Bold Font Existiong: Normal Font
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 14 HANDBOOK for FTTH-OSP v 1.0 (June 2013) C. ODC D. MH/HH/CLOSURE 1) MH/HH: Name of Existing MH/HH or Type of New MH/HH 2) Closure: a. Straight Joint: SC-OF-SM-xxx b. Pass-through Joint: SC-OF-SM-xxx-PT ODC Capacity ODC No. “FA”, “FB”, ....... Code STO Code ODC xx PS 1:4 (xxx HP) Number of Homepass Code Splitter 1:4 Number of Splitter 1:4 Coordinates Lokasi ODC ODC-XXX-FA-288 ( - ) Assigned core to be terminated
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 15 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.4 SAMPLE DESIGN OF FEEDER CABLE NETWORK 1.3 PETA LOKASI DUCT & KABEL FEEDER ► Purpose: Information required for the Civil Work shall be plot on the scaled map 1) SKEMA DUCT (Refer to 1.4.1) 2) SKEMA KABEL FEEDER (Refer to 1.4.2) 3) PETA LOKASI KABEL FEEDER (Refer to 1.4.3) Lokasi CC ODC-ABC-F+-288 STO ABC 24 15.0 ABC 01/01 ABC 01/02 ABC 01/03 ABC 01/xx ABC 01/yy 6 6 6 6 4 ABC 02/02 ABC 02/01 ABC 02/xx 100.0 100.0 100.0 100.0 100.0 HH-2 HH80 DD-BM-HDPE-1 35.0 HH-1 HH-1 DD-BM-HDPE-1 150.0 DD-BM-HDPE-BIG-1 DD-BMHDPEBIG-1 150.0 bbb. 0 Lokasi AA ODC-ABC-F+-144 Lokasi BB ODC-ABC-F+-288 Lokasi DD ODC-ABC-F+-144 JL．ＡＢＣ ＲＡＹＡ JL．ＡＢＣ ＩＩ JL．ＡＢＣ Ｉ aaa.0 DD-BMHDPEBIG-1 Cable slack (10) shall be provided at every 1000m of cable length. (In case of DD-BM-HDPE, HH-1/2 shall be installed.) HH-1 Legend: : Assigned Duct for New Cable : Vacant Duct : Occupied Duct Lokasi CC ODC-ABC-F+-288 xx PS 1:4 (yyHP) (241-288) Ｎ ｘｘｘ°xxx.xxxx E yyy ° yyy.yyyy Lokasi DD ODC-ABC-F+-144 xx PS 1:4 (yyHP) (217-240) Ｎ ｘｘｘ°xxx.xxxx E yyy ° yyy.yyyy Lokasi AA ODC-ABC-F+-144 xx PS 1:4 (yyHP) (121-144) Ｎ ｘｘｘ°xxx.xxxx E yyy ° yyy.yyyy Lokasi BB ODC-ABC-F+-288 xx PS 1:4 (yyHP) (73-120) Ｎ ｘｘｘ°xxx.xxxx E yyy ° yyy.yyyy STO ABC TC-SM-144 (3) FE-ABC-01-01 (01-144) DC-OF-SM-144D ++m FE-ABC-01-01-01 (121-144) DC-OF-SM-24D ++m FE-ABC-01-02 (01-120) DC-OF-SM-144D ++m FE-ABC-01-02-01 (73-120) DC-OF-SM-48D ++m CAD (01 – 72) FE-ABC-02-01 (01-288) DC-OF-SM-288D ++m DC-OF-SM-288D ++m FE-ABC-02- 02 (01-240) CAD (01 – 216) FE-ABC-02-01-01 (241-288) DC-OF-SM-48D ++m FE-ABC-02-02-01 (217-240) DC-OF-SM-48D ++m JL．ＡＢＣ ＲＡＹＡ JL．ＡＢＣ Ｉ JL．ＡＢＣ ＩＩ ABC 01/02 ABC 01/yy DC-OF-SM-288D ++m FE-ABC-02- 02 (01-240) Cable Slack (10m) shall be placed every 1000m of cable span and/or the location where the future demand is expected. STO ABC 100.0 ABC 01/01 DD-BM-HDPE-1 150.0 DD-BM-HDPE-1 35.0 HH80 HH-2 HH-1 HH-1 DD-BM-HDPE-BIG-1 150.0 JL．ＡＢＣ ＲＡＹＡ JL．ＡＢＣ ＩＩ JL．ＡＢＣ Ｉ Lokasi BB ODC-ABC-F+-288 Lokasi AA ODC-ABC-F+-144 Lokasi CC ODC-ABC-F+-288 Lokasi DD ODC-ABC-F+-144 DD-BM-1 10.0 DD-BM-1 10.0 DD-ROD-1 15.0 DD-ROD-1 xxxx.0 ABC 01/02 ABC 01/03 ABC 01/xx DD-BM-HDPEBIG-1 bbb. 0 aaa. 0 DD-BM-HDPEBIG-1 HH-1 ABC 02/03 ABC 02/01 ABC 02/xx ABC 01/xx ABC 01/xx ABC 01/yy ABC 02/02 DD-ROD1 1００.0 DD-ROD1 1００.0 DD-ROD1 1００.0 DD-ROD1 xxx.0 DD-ROD1 1００.0 DD-ROD1 1００.0 DD-ROD1 xxx.0 DD-ROD1 1００.0 DD-ROD1 1００.0 DD-ROD1 xxx.0
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 16 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.4.1 SKEMA DUCT STO ABC 24 15.0 ABC 01/01 ABC 01/02 ABC 01/03 ABC 01/xx ABC 01/yy 6 6 4 6 6 ABC 02/02 02/01 ABC ABC 02/xx 100.0 100.0 100.0 100.0 100.0 HH-80 HH-2 DD-BM-HDPE-1 35.0 HH-1 HH-1 DD-BM-HDPE-1 150.0 DD-BM-HDPEBIG-1 DD-BM-HDPE- BIG-1 bbb.0 150.0 Lokasi AA ODC-ABC-F+-144 Lokasi BB ODC-ABC-F+-288 Lokasi CC ODC-ABC-F+-288 Lokasi DD ODC-ABC-F+-144 JL．ＡＢＣ ＲＡＹＡ JL．ＡＢＣ ＩＩ JL．ＡＢＣ Ｉ aaa.0 DD-BM-HDPEBIG-1 HH-1 Cable slack (10) shall be provided at every 1000m of cable length. (In case of DD-BM-HDPE, HH-1/2 according to Page 23, 1.6.3 shall be installed.) Legend: : Assigned Duct for New Cable : Vacant Duct : Occupied Duct
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 17 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.4.2 SKEMA KABEL FEEDER Lokasi CC ODC-ABC-F+-288 xx PS 1:4 (yyHP) (241-288) Ｎ ｘｘｘ°xxx.xxxx E yyy ° yyy.yyyy Lokasi DD ODC-ABC-F+-144 xx PS 1:4 (yyHP) (217-240) Ｎ ｘｘｘ°xxx.xxxx E yyy ° yyy.yyyy Lokasi AA ODC-ABC-F+-144 xx PS 1:4 (yyHP) (121-144) Ｎ ｘｘｘ°xxx.xxxx E yyy ° yyy.yyyy Lokasi BB ODC-ABC-F+-288 xx PS 1:4 (yyHP) (73-120) Ｎ ｘｘｘ°xxx.xxxx E yyy ° yyy.yyyy STO ABC TC-SM-144 (3) FE-ABC-01-01 (01-144) DC-OF-SM-144D ++m FE-ABC-01-01-01 (121-144) DC-OF-SM-24D ++m FE-ABC-01-02 (01-120) DC-OF-SM-144D ++m FE-ABC-01-02-01 (73-120) DC-OF-SM-48D ++m CAD (01 – 72) FE-ABC-02-01 (01-288) DC-OF-SM-288D DC-OF-SM-288D ++m ++m FE-ABC-02-02 (01-240) CAD (01 – 216) FE-ABC-02-01-01 (241-288) DC-OF-SM-48D ++m FE-ABC-02-02-01 (217-240) DC-OF-SM-48D ++m JL．ＡＢＣ ＲＡＹＡ JL．ＡＢＣ Ｉ JL．ＡＢＣ ＩＩ ABC 01/02 ABC 01/yy DC-OF-SM-288D ++m FE-ABC-02-02 (01-240) Cable Slack (10m) shall be placed every 1000m of cable span and/or the location where the future demand is expected. (Note: Do not show on drawing) ( )
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 18 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.4.3 PETA LOKASI KABEL FEEDER STO ABC ABC 01/01 DD-BM-HDPE-1 150.0 DD-BM-HDPE-1 35.0 HH-80 HH-2 HH-1 HH-1 DD-BM-HDPEBIG-1 150.0 JL．ＡＢＣ ＲＡＹＡ JL．ＡＢＣ ＩＩ JL．ＡＢＣ Ｉ Lokasi BB ODC-ABC-F+-288 Lokasi AA ODC-ABC-F+-144 Lokasi CC ODC-ABC-F+-288 Lokasi DD ODC-ABC-F+-144 DD-BM-1 10.0 DD-BM-1 10.0 DD-ROD-1 15.0m ABC 01/02 ABC 01/03 ABC 01/xx DD-BM-HDPEBIG-1 aaa.0 bbb.0 DD-BM-HDPEBIG-1 HH-1 ABC 02/02 ABC 02/01 ABC 02/xx ABC 01/xx ABC 01/xx ABC 01/yy ABC 02/03 DD-ROD-1 xxx.0m DD-ROD-1 100.0m DD-ROD-1 100.0m DD-ROD-1 100.0m DD-ROD-1 100.0m DD-ROD-1 100.0m DD-ROD-1 100.0m DD-ROD-1 100.0m DD-ROD-1 xxx.0m DD-ROD-1 xxx.0m 1. FE-ABC-01 2. FE=ABC-02 Note: In case if plural cables will be installed in one (1) route, Cable No. to be installed shall be indicated.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 19 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.5 CORE ASSIGNMENT DIAGRAM 1. CORE ASSIGNMENT DIAGRAM shall be prepared prior to draw the SKEMA KABEL as a tool so as to arrange the core assignment of the feeder cable easily. (Not for submission purpose) 2. CORE ASSIGNMENT DIAGRAM shall be prepared per each FEEDER CABLE. 3. The higher number of core (e.g. 288 in 288-core cable) shall be assigned from the nearest ODC, and the youngest number shall be assigned for the furthest ODC or CAD (Spare core). START FEEDER CABLE ROUTE PLAN: => Draft for Skema Feeder 1. SKEMA DUCT EXISTING shall be referred as the basic information for the Feeder Cable Route Plan. 2. Plot all ODCs TO BE FED BY THE CABLE together with its capacity along the existing duct route. 3. Where the existing duct is not available, new duct construction or DD-BM-HDPE shall be planned. 4. Plot all prospected/ potential locations including Al-Pro, MSAN, GDI etc. along the expected feeder cable route. Decision of Network Configuration: 1.Ring 2.Star/Bus SUM UP the required number of fiber cores: 1.ODC-144: 24 cores 2.ODC-288: 48 cores Decision of Feeder Cable Capacity: 1.Required number of cores ≤ 96 → 96C 2.Required number of cores 97 ≥, ≤ 144 → 144 3.Required number of cores 145 ≥, ≤ 288 → 288 4.Required number of cores ≥ 288 → 288 + another cable according to the required capacity Preparation of CORE ASSIGNMENT DIAGRAM END FLOW OF CORE ASSIGNMENT DIAGRAM PREPARATION
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 20 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.5.1 EXAMPLE OF CORE ASSIGNMENT DIAGRAM (1): STAR/BUS TOPOLOGY SKEMA KABEL FEEDER (Reference for Main Information) Lokasi AA ODC-288 (241 – 288) Lokasi CC ODC-144 (169 – 192) Lokasi DD ODC-144 (145 – 168) Lokasi BB ODC-288 (193 – 240) CAD (72) (01 – 72) Lokasi EE ODC-288 CAD (24) (97 – 144) (73 – 96) (01 – 288) (288) (288) (288) (01 – 240) (01 – 192) (145 – 192) (01 – 72) (96) (48) (145 – 168) (24) (48) (97 – 144) (48) (193 – 240) (48) (241 – 288) (24) (169 – 192) STO ABC TC-OF-SM-144 (2) 01 - 24 25 - 48 49 - 72 73 - 96 97 - 120 121 - 144 145 - 168 169 - 192 193 - 216 217 - 240 241 - 264 265 - 288 Lokasi AA ODC-288 (241 – 288) Lokasi BB ODC-288 (193 – 240) STO ABC Lokasi CC ODC-144 (169 – 192) Lokasi DD ODC-144 (145 – 168) CAD (73 – 96) CAD (72) (01 – 72) Lokasi EE ODC-288 (97 – 144) (288) (96) (48) (48) (24) (24) (48) LEGEND: : Joint Closure : Fusion Splicing : Cable (Core) (XX)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 21 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.5.2 EXAMPLE OF CORE ASSIGNMENT DIAGRAM (2): RING TOPOLOGY Lokasi DD ODC-288 (145 – 192) 01 24 25 48 49 72 73 96 97 120 121 144 145 168 169 192 193 216 217 240 241 264 265 288 265 288 241 264 217 240 193 216 169 192 145 168 121 144 97 120 73 96 49 72 25 48 01 24 Lokasi AA ODC-144 STO ABC (265 – 288) Lokasi CC ODC-288 (193 – 240) Lokasi EE ODC-144 (121 – 144) Lokasi GG ODC-288 (49 – 96) Lokasi BB ODC-144 (241 – 264) Lokasi DD ODC-288 Lokasi FF (145 – 192) ODC-144 (97 – 120) CAD (01 – 48) CAD (01 – 48) SKEMA KABEL FEEDER (Reference for Main Information) STO ABC TC-OF-SM-144 (4) Lokasi AA ODC-288 (241 – 288) (01 – 288) (01 – 288) (01 – 288) Lokasi BB ODC-144 (241 – 264) Lokasi CC ODC-288 (193 – 240) Lokasi EE ODC-144 (121 – 144) Lokasi FF ODC-144 (97 – 120) Lokasi GG ODC-288 (49 – 96) (48) (48) (48) (48) (96) (96) (96)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 22 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.6 GENERAL CONCEPT FOR FEEDER CABLE DESIGN 1.6.1 ODC SPEC. (Non-HRB Type) ODC type Designator Splitter (1:4) Maximum HP Feeder (input Fiber core) Number of Cable Entry (Input+Output) 48 (pole) ODC-C-48 Splitter Max. 6pcs 6x32=192 Star ; 12C Ring ; 24C 4 96 (pedestal) ODC-C-96 Splitter Max. 8pcs 8*32=256 Star ; 12C Ring ; 24C 8 144 (pedestal) ODC-C-144 Splitter Max. 18pcs 18x32=576 Star ; 24C Ring ; 48C 12 288 (pedestal) ODC-C-288 Splitter Max. 36pcs 36x32=1152 Star ; 48C Ring ; 96C 12 576 (pedestal) ODC-C-576 Splitter Max. 72pcs 72x32=2304 Star ; 96C Ring ; 192C 24 1.6.2 FEEDER CABLE SPEC. Fiber Count Number of Tubes Number of Fiber/Tube Tube Diameter Outer Diameter Bending Radius (20 x OD) 12C 2 6 2.1mm 12.8mm 25.6cm 24C 4 6 2.1mm 12.8mm 25.6cm 48C 4 12 2.5mm 13.9mm 27.8cm 96C 8 12 2.5mm 15.6mm 31.2cm 144C 12 12 2.5mm 19.1mm 38.2cm 288C 24 12 2.5mm 22.1mm 44.2cm
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 23 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.6.3 HDPE PIPE/HANDHOLE for FEEDER CABLE In case when the existing duct is not available and new duct (HDPE) will be installed, the following shall be taken into consideration: 1) Feeder Cable with the capacity 288-core: ► HDPE BIG/SUBDUCT BIG shall be used. ► Hand-hole Type HH-1 (L=1700 x W=1250 x D=1300) shall be used for all locations. 2) Feeder Cable with the capacity 144-core ► HDPE 33/40/SUBDUCT shall be used. ► Hand-hole Type HH-1 (L=1700 x W=1250 x D=1300) shall be used for all locations. 3) Feeder Cable with the capacity 96-core or less ► HDPE 33/40/SUBDUCT shall be used. ► Hand-hole Type HH-2 (L=1200 x W=600 x D=1300) shall be used for all locations 1.6.4 HANDHOLE for ODC At ODC location, HANDHOLE shall be installed: 1) Type HH-1 (L=1700 x W=1250 x D=1300): ► Where the Jointing Closure from the Feeder Cable with 288/144-core.is installed including the location where slack is located for future jointing. 2) Type HH-2 (L=1200 x W=600 x D=1300): ► Where Handhole shall be located on the carriage way. 3) Type HH-80 (L=800 x W=800 x D=800): ► Where Handhole will be located on the Green Area (Taman) in the housing area (Perumahan) and where no jointing closure will be located.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 24 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1.6.5 PASS THROUGH CLOSURE for FEEDER CABLE Through Cable Type Model No. (3M) 48core 2179CS Type 1 : 24core tray (1) Size ; 447mm x 175mm x 107mm 96core, 144core 2179C Type 2 : 24core tray (1) Type 3 : 24core tray (2) Size ; 557mm x 215mm x 119mm 288core 2178LS Type 4 : 24core tray (2) Type 5 : 24core tray (4) Size ; 557mm x 216mm x 203mm Option: 24core tray , Re-entry kit Consultation shall be necessary in case when the other optional items are required.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 25 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 2. DISTRIBUTION CABLE DESIGN Maximum Usage of Distribution Cable shall be 80% of the cable capacity: Maximum No. of ODP: No. of Spare Core (CADANGAN) 1) 8-Core Cable: 6 (Only for Branch Section) 2 CORE CAD. 2) 12-Core Cable: 10 2 CORE CAD. 3) 24-Core Cable: 20 4 CORE CAD. 2.1 GOOGLE MAP 1) ODC (Name/Capacity) 2) Distribution Cable Route 3) Location of ODP 2.2 SKEMA KABEL DISTRIBUSI ► Purpose: Information required for the Distribution Cable Work 1) ODC ODC Capacity ODC No. “FA”, “FB”, ....... Code STO Code ODC ODC-XXX-FA-288
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 26 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 2) DISTRIBUTION CABLE DSXXX-FE 01-01-01/01-01-01 (01-24) Core No. In Cable Segment No. Code STO Label Feeder (Feeder No., Segment No.) DC-OF-SM-24SC-xxM Cable Length in meter Designation for “Easy to Split” Cable No. Of Cores Type of Cable Duct Cable: DC-OF-SM Aerial Cable: AC-OF-SM Code Distribution Cable Distribution No. Branch-Segment No.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 27 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 3) ODP FA/D01/xx/yy (xx) No. No. Number of Splitter 1:8 “1”: ODC-8 “2”: ODC-16 ODP No. Note: 1. Continuous number starting from D01: example: 10 ODP on D01, ODP on D02 shall be started from No.11. 2. ODP No. shall be given from the far most ODP from ODC location. Distribution Cable No. ODC No. Core No. to be terminated at ODP e.g. from 01 to 24 The largest No. of care shall be allocated to the nearest ODP from ODC. House No. in front of ODP Location Coordinates Lokasi ODP Note: Grounding shall be placed at the last ODP for each distribution cable.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 28 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 2.3 SAMPLE DESIGN OF DISTRIBUTION CABLE NETWORK 1) SKEMA KABEL DISTRIBUSI 2) PETA LOKASI KABEL DISTRIBUSI 2.3.1 CASE-1: UNDERGROUND/DUCT CABLE ODC-F+-144 xx PS 1:4 (yyHP) DSABC-FE-01-01/01-01 (01-12) DSABC-FE-01-01/01-02 (01-10) DSABC-FE-01-01/01-03 (01-09) DSABC-FE-01-01/01-xx (01-05) F+/D01/07/02 (11-12) N ++++... E +++....... N ++++... E +++....... F+/D01/06/01 (10) N ++++... E +++....... F+/D01/05/01 (09) ODP-PW-BR N ++++... E +++....... F+/D01/01/02 (03-04) N ++++... E +++....... CAD (01-02) DC-OF-SM-12-SC +..m DC-OF-SM-12-SC +..m DC-OF-SM-12-SC +..m DC-OF-SM-12-SC +..m 3 4 9 10 16 17 31 F+/D01/04/01 (08) DSABC-FE-01-01/01-03-01 (08) DC-OF-SM-8-SC +..m N ++++... E +++....... JL. +++++++.. HH-2 ODC-F+-144 xx PS 1:4 (yyHP) DD-BM-HDPE-1 +..m DD-BM-HDPE-1 +..m DD-BM-HDPE-1 +..m DD-BM-HDPE-1 +..m DD-BM-1 +..m DD-BM-1 +..m DD-BM-1 +..m DD-BM-HDPE-1 +..m DD-BM-HDPE-1 +..m DD-BM-HDPE-1 +..m DD-BM-1 +..m DD-BM-HDPE-1 +..m DD-BM-1 +..m 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 29 30 31 32 DD-BM-HDPE-1 +..m F+/D01/07/02 F+/D01/06/01 F+/D01/05/01 ODP-PW-BR F+/D01/01/02 F+/D01/04/01 JL. +++++++.. Note: At the BRANCHING, the core assignment and the ODP No. shall be in accordance with the rule below.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 29 HANDBOOK for FTTH-OSP v 1.0 (June 2013) STO ABC NAMA LOKASI Cluster AA (ODC-F+-144) DISTRIBUTION CABLE No. D-01 CAPACITY 12-CORE FEEDER SEGMENT DISTRIBUTION SEGMENT OTB Port No. ODC PORT No. SPLITTER 1:4 ODC TRAY CORE No. Port No. PORT No. No. 49 1 1 1 1 1 1 2 2 2 3 3 3 4 4 4 50 2 2 1 5 5 2 6 6 3 7 7 4 8 8 51 3 3 1 9 9 2 10 10 3 11 11 4 12 12 7 6 5 4 3 2 3) CORE ASSIGNMENT DIAGRAM (For CASE-1) 1 CAD 8-C
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 30 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 2.3.2 CASE-2: AERIAL CABLE 1) SKEMA KABEL DISTRIBUSI 2) PETA LOKASI KABEL DISTRIBUSI ODC-F+-144 xx PS 1:4 (yyHP) DSABC-FE-01-01/01-01 (01-12) DSABC-FE-01-01/01-02 (01-11) DSABC-FE-01-01/01-03 (01-10) DSABC-FE-01-01/01-xx (01-05) F+/D01/08/01 (12) N ++++... E +++....... N ++++... E +++....... F+/D01/07/01 (11) N ++++... E +++....... F+/D01/06/01 (10) ODP-PW-BR N ++++... E +++....... F+/D01/01/01 (05) N ++++... E +++....... CAD (01-04) AC-OF-SM-12-SC +..m AC-OF-SM-12-SC +..m AC-OF-SM-12-SC +..m AC-OF-SM-12-SC +..m 3 4 9 10 16 17 31 F+/D01/05/01 (09) DSABC-FE-01-01/01-03-01 (09) AC-OF-SM-8-SC +..m N ++++... E +++....... JL. +++++++.. HH-2 ODC-F+-144 xx PS 1:4 (yyHP) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 29 30 31 32 F+/D01/08/02 F+/D01/07/01 F+/D01/06/01 ODP-PW-BR F+/D01/01/01 F+/D01/05/01 JL. +++++++.. BC-PP 3m 30m 45m 45m 45m 45m +.m 25m LEGEND : New Pole : Existing Pole Branching ODP (1 x 1:8 Splitter) ODP Aerial (1 x 1:8 Splitter) 30m Note: At the BRANCHING, the core assignment and the ODP No. shall be in accordance with the rule below.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 31 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 3) CORE ASSIGNMENT DIAGRAM (For CASE-2) STO ABC NAMA LOKASI Cluster AA (ODC-F+-144) DISTRIBUTION CABLE No. D-01 CAPACITY 12-CORE FEEDER SEGMENT DISTRIBUTION SEGMENT OTB Port No. ODC PORT No. SPLITTER 1:4 ODC TRAY CORE No. No. Port No. PORT No. 49 1 1 1 1 1 1 2 2 2 3 3 3 4 4 4 50 2 2 1 5 5 2 6 6 3 7 7 4 8 8 51 3 3 1 9 9 2 10 10 3 11 11 4 12 12 ODP No. 8 7 6 5 4 3 2 1 CAD 12-C 12-C 8-C
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 32 HANDBOOK for FTTH-OSP v 1.0 (June 2013) Main Cable (SCPT-8/12/24-core) ODP Pedestal/Wall Capacity: 8 or 16 ODP Pedestal/Wall Capacity: 8 or 16 Branching Cable (SCPT-8-core) Branching ODP (1 x 1:8 Splitter) Designator: ODP-PL-BR 2.4 BRANCHING ODP 1) Underground Cable (Pedestal/Wall Mount) Branching ODP shall be used in case when the several ODP locations are not suitable to be fed by the main cable but independent cable installation is also not efficient due to the limited number of ODP (Less than 8 ODP). Branching ODP: 1)Branching ODP is applicable for both underground as well as aerial distribution cable design. 2)Type of ODP is “Cabinet” type to be mounted on: WALL, POLE and PEDESTAL. 3)The cable to be branched from the main cable shall be of “8-Core”. 4)The number of ODP on branched cable shall be less than 8. 5)The branching ODP is able to accommodate only one (1) unit of 1:8 Splitter. 2) Aerial Cable (Pole Mount) Main Cable (SSW-8/12/24-core) ODP Aerial Capacity: 8 ODP Aerial Branching Cable Capacity: 8 (SCPT-8-core) Branching ODP (1 x 1:8 Splitter) Designator: ODP-P/W-BR
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 33 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 2.5 DUCT USAGE FOR DISTRIBUTION NETWORK & DROP-CORE INSTALLATION (UNDERGROUND) ODC – ODP/ ODP – ODP 1)DD-BM-HDPE 2)BC-TR-1.5 + DD-HDPE ODP (HH-PIT-60) – HH-PIT-40/ HH-PIT-40 – HH-PIT-40 1) BC-TR-0.6 + DC-SD-1 Big HH-PIT-60 HH-PIT-40 HH-PIT-40 HH-PIT-40 - Premises 1) BC-TR-0.4 + PP-OF-OUT(PVC ¾”)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 34 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 3. GENERAL CONCEPT FOR DISTRIBUTION CABLE DESIGN 1) Bila ditemukan jalan buntu pada perumahan dengan jalak Drop core <100 meter maka penempatan ODP diletakkan di ujung jalan masuk Blok Perumahan, Gambar Terlampir: 1) When you find a blind alley which need drop core cable less than 100 m, the ODP should be placed at the entrance of the alley. Please see the illustration below. General Preparation for the Distribution Cable Design: Prior to plotting ODP on the map, ODP Boundary (Max. 8 or 16HP) shall be designated so that the number of ODP and its location can be planned efficiently. 3.1 DUCT/BURIED SECTION
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 35 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 2) Bila ditemukan jalan buntu pada perumahan dengan jalak Droop core >100 meter maka diperbolehkan menggunakan ODP Branch dari kabel distribusi untuk kabel yang akan menuju ke ODP dengan jumlah branch sesuai denga HP, Gambar Terlampir : 2) When you find a blind alley which need drop cable more than 100 m, it is allowed to use the ODP Branch from the main distribution cable according to the quantity of HP. Please see the illustration below.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 36 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 3) Bila ditemukan jalan tidak buntu pada perumahan maka penarikan kabel distribusi dapat dilakukan secara mengelilingi perumahan yang letak ODP di sesuaikan dengan jumlah HP, Gambar Terlampir : 3) When it is not a blind alley, span of the cable should pass around the complex and placement of ODP should be adjusted according to the HP. Please see the illustration below.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 37 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 3.2 AERIAL SECTION 1) Sample Design based on Duct Cable Design Standard => (Some consideration due to particularity of the aerial cable shall be required.) 6.5m 45m 6.5m 30m 45m 45m 40m 45m 45m 11m 45m 45m 45m 25m 25m 6.5m 35m 45m 45m 45m Road width more than 6m Road width less than 6m AC-OF-SM-12-SC AC-OF-SM-8-SC AC-OF-SM-8-SC AC-OF-SM-12-SC ODP-BR ODP-BR Note: Location where special consideration is required due to a particularity of the aerial cable installation : ODC : ODP 1) ODP-SSW-8 2) ODP-BR : HH-2/HH-80 : New Pole 7m/9m LEGEND C-CLAMP x 2 Detail for Riser Part SSW CABLE Cable part shall be protected with Spiral for outdoor use (Black color) Detail for Riser Part Note: Prior to plotting ODP on the map, ODP Boundary (Max. 8HP) shall be designated so that the number of ODP and its location can be planned efficiently.
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 38 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 2) Sample Design based on Particularity for Aerial Cable : Additional Pole for Drop Core LEGEND for Additional Item : Drop Core Run 6.5m 45m 6.5m 40m 45m 45m 40m 45m 45m 45m 11m 45m 45m 25m 25m 6.5m 35m 45m 45m 45m Road width more than 6m Road width less than 6m 30m 35m 10m 15m 25m 30m 30m 40m 35m 25m 35m Detail "Drop-A" Detail "Drop-B" Detail "Drop-C" Note: Location where special consideration is taken due to a particularity of the aerial cable installation Some particular consideration required for Aerial Cable Design 1. Additional pole(s) may be required for the drop cable installation. (Actual installation of additional poles shall be decided in accordance with contract with the developper/owner) 2. Road width less than 6m can be crossed by the drop cable as far as the road traffic will not be disturbed otherwise new pole shall be installed. 3. Location of ODP shall be decided so that: 1) Drop cable can be installed along SSW cable. 2) Drop cable can be installed indipendently for one (1) span (2 spans at maximum)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 39 HANDBOOK for FTTH-OSP v 1.0 (June 2013) C-CLAMP x 2 SSW CABLE Cable part shall be protected with Spiral for outdoor use (Black color) 3) Details of SSW Installation A. Details of Riser Part B. ODP-SSW Location 10cm ODP-SSW-8 B-1. With C-CLAMP C. Cable Allignment As far as it is practical, the cable shall be installed so that the suspension wire is always above the cable part. Suspension Wire Cable Part At the cable laying, turns in the cable shall be released by turning the cable winding while making the 8-figure. 50mm Bend 150mm remove sheath D. C-LAMP E. Line Guard Installation ±30cm Line Guard L= 51cm ODP-SSW-8 B-2. With LINE GUARD SUSPENSION CLAMP ±25cm < 120° LINE GUARD shall be installed where: 1. One (1) in every three (3) poles in the straight line. 2. At the pole beside the ODP-SSW is installed except the location where CCLAMP is installed. Caution: LINE GUARD shall be fixed and the Suspension Wire at C-CLAMP shall be bent ONLY after all ODP-SSW installation have been completed and the cable allignment has been confirmed so that no turn is contained in the cable span. : SSW Cable (Japan) LEGEND : C-Clamp (Japan)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 40 HANDBOOK for FTTH-OSP v 1.0 (June 2013) Drop Cable (Aerial) HC-OF-SM-2D 4) Details of Drop-Core Solution Detail "Drop-A" Messenger wire from drop cable to pole or φ1.2mm galvanized steel wire with sheath coating Detail "Drop-B" Detail "Drop-C" : S-Clamp (Japan) LEGEND : D-Clamp (Japan) : BW-Clamp (Local) FUSE-CONNECT ISC-UPC-FD ROSETTE RS-IN-SC-1P/ TC-MK-SC-1P Details of "Home Connect" ODP-SSW-8 ODP-PL/PW8/16 Drop Cable (Underground) GC-OF-SM-2D Wire Grip 3/8" with double nut
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 41 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 4. CABLE RACK/OTB RACK IN STO BUILDING Note: 1. The cable routing in the STO building shall be measured so as to estimate the cable length from the duct entrance at the Cable Chamber until the OTB. 2. In case when the new rack shall be provided, the rack to be installed shall be of same type and the same color with the existing one. 3. In the decision of the location of 19” rack installation, well coordination with DBB, Telkom Area and/or WASPANG is required. 4. When the location of new 19” Rack installation is fixed, the designated location on the floor shall be clearly marked with an adhesive tape and a permanent marker as: “FTTH OSP JF DJAFa” 5. The maximum number of unit of TC-OF-SM-144 to be accommodated in the 19” Rack with Height of 2.20m shall be FIVE (5). CABLE CHAMBER MDF ROOM OTB ROOM/ TRANSMISSION ROOM 19” RACK H=2200 Max. 5 x TC-OF-SM-144 FEEDER CABLE STO BUILDING CABLE RACK
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 42 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 5. HIGH-RISE BUILDING (HRB) DESIGN No. Designator Application No. of Splitter (Max.) Number of Port Home Pass Accommodated (80%) In Out Total 1. ODC for HRB/MDU (Approx.) 1.1 ODC-HRB-180 (*) Cabinet/ Wall 1:4 x 36 36 144 180 900 1.2 ODC-HRB-240 (*) Cabinet 1:4 x 48 48 192 240 1200 1.3 ODC-HRB-420 (*) Cabinet 1:4 x 84 84 336 420 2200 1.4 ODC-HRB-RACK-120 (**) 19" Rack Mount 1:4 x 24 24 96 120 600 1.5 ODC-HRB-RACK-240 (**) 19" Rack Mount 1:4 x 48 48 192 240 1200 1.6 ODC-HRB-RACK-480 (**) 19" Rack Mount 1:4 x 96 96 384 480 2500 2. ODP for HRB/MDU (Installed) (Max.) 2.1 ODP-HRB-16 (*) Wall Mount 1:8 x 1 - 8 8 16 1:8 x 2 - 16 16 2.2 ODP-HRB-32 (*) Wall Mount 1:8 x 3 - 24 24 32 1:8 x 4 - 32 32 3. 2-C Low Friction Indoor Cable 3.1 IC-OF-SM-1D Distribution/ Drop-core 1-Core (G657A) Low Friction Indoor Cable for DISTRIBUTION-CABLE 3.2 IC-OF-SM-2D 2-Core (G657A) Low Friction Indoor Cable for DROP-CABLE 1-Core connected with Fuse-Connect (ISC-UPC-FD), 1-Core for spare 4. ROSETTE SC Adapter 4.1 RS-IN-SC-1P 1 4.2 RS-IN-SC-2P 2 To be discussed when necessary (***) Indoor Rosette 4.3 RS-IN-SC-4P 4 To be discussed when necessary (***) 4.4 TC-MK-SC-1P 1 Indoor Rosette (Buried in wall) 4.5 TC-MK-SC-2P 2 To be discussed when necessary (***) 4.6 TC-MK-SC-4P 4 To be discussed when necessary (***) 5.1 MATERIAL FOR HRB SOLUTION Note (*): New Item (Specifications have been accepted by TELKOM) (**): New Item (Specifications shall be subject to concurrence by TELKOM) (***): To be discussed with DBB TELKOM when 2P or 4P Rosette is required by the Developer
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 43 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1-Core Low Friction Indoor Cable for 1x 1:8 Splitter with Field Installable SC Connector (Fuse-connect) x 1pc at both ends ODC-HRB1) 180 2) 240 3) 420 ODC-HRB-RACK1) 120 2) 240 3) 480 Feeder Cable: 1) For ODC-HRB-180: 24/48C 2) For ODC-HRB-240: 48C 3) For ODC-HRB-480: 96C ODP: 1) ODP-HRB-16: Up to 16 HP (1or 2 x 1:8 Splitter) Size: H=330 x W=260 x D=130 2) ODP-HRB-32: Up to 32 HP (3 or 4 x 1:8 Splitter) Size: H=412 x W=312 x D=140 ODPHRB Cable Tray/Shaft/Ladder Rosette: TC-MK-SC-xP (1-Port/2-Port/4-Port) 2-Core Low Friction Indoor Cable with Field Installable SC Connector (Fuse-connect) x 1pc at both ends ODPHRB 4) For ODC-HRB-RACK-120: 24C 5) For ODC-HRB-RACK-240: 48C 6) For ODC-HRB-RACK-480: 96C 5.2 DESIGN CONCEPT FOR HRB SOLUTION DESIGN CONCEPT FOR HRB 1. ODC shall be selected among all types according to the site situation as well as number of Home Pass of the target building. 2. ODP shall be selected among three (3) types according to the number of Home Pass and the Floor Layout. 3. 2-Core Low Friction Indoor Cable shall be used between ODC and ODP. 4. One (1) Low Friction Indoor Cable shall be connected ODC Port with one (1) 1:8 Splitter of ODP i.e.: 1) ODP-HRB-16: One (1) or two (2) Low Friction Indoor Cable: a. 1 x 1:8 Splitter: 1 Low Friction Cable b. 2 x 1:8 Splitter: 2 Low Friction Cables 2) ODP-HRB-32: Three (3) or four (4) Low Friction Indoor Cables: a. 3 x 1:8 Splitter: 3 Low Friction Cables b. 4 x 1:8 Splitter: 4 Low Friction Cables
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 44 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 5.3 Type of ODC for High-Rise-Building 1) CABINET TYPE 2) RACK MOUNT TYPE (To be mounted in the Closed Rack H=1.20m) H= 770 W=555 D=310 ODC-HRB-180 Application: Wall/Floor D=360 H= 1450 W=750 ODC-HRB-240/420 Application: Floor W=428 H= 275 D=302.3 ODC-HRB-RACK-120 Application: 19" Rack W=428 H= 445 D=302.3 ODC-HRB-RACK-240 Application: 19" Rack W=428 D=302.3 H= 890 ODC-HRB-RACK-480 Application: 19" Rack
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 45 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 5.4 Example of Cable Tray/Trunking 1) HORIZONTAL RUN (a) On the Cable Tray Cable Tray Cable Trunking (b) Direct Attachment to the Building Wall 2) VERTICAL RUN ODPHRB Elbow (Flat Angle) T-Joint Cable Trunking
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 46 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 5.5 SAMPLE DESIGN: SKEMA DISTRIBUSI ODC ABC BUILDING F.../STO/HRB-xxx xx PS 1:4 (xxx HP) S 6 +++++ E 106 +++... x IC-OF-SM-1D __m x IC-LF-OF-SM-1D __m x IC-OF-SM-1D __m 2 IC-OF-SM-1D__m x IC-LF-OF-SM-1D __m 1 IC-LF-OF-SM-1D __m 2 IC-OF-SM-1D __m x IC-OF-SM-1D __m x IC-OF-SM-1D __m F//P01-02/1/2 ODP-HRB-16 F//P03/2/1 ODP-HRB-16 (Note: Not "8") ODC No. Code STO "HRB"-"Capacity" 180 240 420 No. of Splitter No. of Home Pass No. of Splitter 1:8 ODP No. ODC Port No. Each No. to be given for Each 1-Core ODC No. Indoor Cable Specify "Tower" and/or "Shaft" according to the Building Layout. F//P04-05/3/2 ODP-HRB-16 2: No. of Indoor Cable to be installed and terminated to ODP __m: Cable Length from ODC to ODP Tower A/ Shaft No.1 Floor-xx Floor-yy Floor-zz Descriptions for ODC １．ODC XXX (Name of Building) 2. F... /STO /HRB-(RACK)-xxx 3. xx PS 1:4 (xxx HP) 4. Coordinates 1. F+/ P-03/ 2/ 1 Descriptions for ODP 2. ODP-HRB-xx Type of ODP: ODP-HRB-16, 32 (See Note above.) Note: Type of ODP-HRB is 2: 1. ODP-HRB-16: No. of 1:8 Splitter= 1 or 2 2. ODP-HRB-32: No. of 1:8 Splitter= 3 or 4
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 47 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 5.6 SAMPLE DESIGN: PETA LOKASI DISTRIBUSI 1) PETA LOKASI KABEL DISTRIBUSI (Vertical View) Tower A F//P03/2/1 ODP-HRB-16 Note: Not "8" F//P04-05/3/2 ODP-HRB-16 ODC ABC BUILDING F.../STO/HRB-xxx xx PS 1:4 (xxx HP) F//P01-02/1/2 ODP-HRB-16 Cable Shaft No.1 Cable Shaft No.2 Cable Tray/Trunking to be installed e.g. Cable Tray W=100mm x 35m 1 LEGEND : ODC-HRB : ODP-HRB : Cable Tray/Trunking (New) 2 : Rosette (1-Port) : Rosette (2-Port) : Cable Tray/Trunking (Existing)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 48 HANDBOOK for FTTH-OSP v 1.0 (June 2013) 1 2 3 LIFT 11 4 5 6 7 8 9 10 19 31 22 30 32 33 34 35 36 37 38 39 18 23 17 24 16 25 15 26 14 27 13 28 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 12 20 29 21 F//P01-02/1/2 ODP-HRB-16 F//P03/2/1 ODP-HRB-16 Note: Not "8" F//P04-05/3/2 ODP-HRB-16 2) PETA LOKASI DROP-CORE (Floor Plan)
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 49 HANDBOOK for FTTH-OSP v 1.0 (June 2013) Table-1: List of Port Management ODC Port No. Distribution Cable No. ODP Unit No. Drop Cable No./Floor Splitter No. Port Length (m) 1 D01 8 1 1 1 30.0 2 2 18.0 3 3 10.0 4 25 55.0 5 26 50.0 6 27 45.0 7 28 40.0 8 29 35.0 2 D02 2 1 11 12 30 31 32 33 34 35 6 7 8 3) LIST OF PORT MANAGEMENT & DROP-CORE LENGTH
HANDBOOK for FTTH OSP (PT TELKOM INDONESIA) Copyright©Fujikura Ltd./Y.N Page 50 HANDBOOK for FTTH-OSP v 1.0 (June 2013)