DH08-B2

DH08-B2 ENGINE MODEL WEICHAI WP4 GROSS POWER 70 KW(94 HP) OPERATING WEIGHT XL:8780 KG(19357 LB.) LGP:9092 KG(20044 LB.) BULLDOZER SERIES LET’S MAKE CONSTRUCTION EASIER www.facebook.com บริษัท เอเซีย วีฮิเคล คอร์เปอเรช�ัน จํากัด 6/57 หมู่ที�2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai

* THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. ENGINE Engine Weichai WP4 Emission China-II Rated revolution 2200rpm Gross power 70kW(94hp) Net power 63kW(85hp) Displacement 4.5 L(274 cu.in) Max. torque 380 Nm(280 lb.-ft.)/1400-1600 rpm DRIVE SYSTEM Drive system Independent dual-circuit electric control hydrostatic drive, intelligent matching of speed-load System overflow pressure 42500 KPa(6162.5 psi) Traveling speed Forward 0~9 km/h(5.6 mph) Backward 0~9 km/h(5.6 mph) Max. theoretical traction force 160.4 kN(36044 lb.) Steering Independent drive of track at both sides to ensure the full power output for pivot steering and steering with load Brake Regular closed multi-disk brake FINAL DRIVE Primary spur gear + primary planetary reduction CHASSIS SYSTEM XL LGP Type Rigid type suspension Track shoe type Single grouser Track gauge 1650 mm(65 in.) 1790 mm(70 in.) Width of track shoe 460 mm(18 in.) 610 mm(24 in.) Track grounding length 2225 mm(87.6 in.) Track grounding area 20470 cm²(3173 sq.in.) 27145 cm²(4207 sq.in.) Number of track shoe 42 pcs/single side Grounding pressure (standard configuration) 42.9 kPa(6.22 psi) 33.5 kPa(4.86 psi) Number of carrier roller 1 pcs/side Number of track roller 6pcs/side Pitch 154.1 MM(6 IN.) Minimum turning radius 3066 mm(120 in.) 3176 mm(125 in.) VOLUME Fuel capacity 197 L(52 gal.) Coolant liquid capacity 19 L(5.0 gal.) Engine oil capacity 10 L(2.6 gal.) Hydraulic oil tank 53 L(14 gal.) Final drive 5.8 L(1.52 gal.)/single side OPERATING WEIGHT XL LGP Operating weight (ROPS canopy + traction frame) 8780 kg(19357 lb.) 9092 kg(20044 lb.) Operating weight (ROPS canopy + ripper) 9437 kg(20805 lb.) 9749 kg(21493 lb.) Operating weight (Cabin+ traction frame) 9050 kg(19951 lb.) 9362 kg(20640 lb.) Operating weight (Cabin+ ripper) 9707 kg(21400 lb.) 10019 kg(22088 lb.) BLADE XL LGP Blade type PAT PAT Blade capacity 1.93 m³(2.5cu.yd.) 2.04 m³(2.7cu.yd.) DIMENSION XL LGP A Machine height (without ROPS) 2860 mm(112 in.) B Track grouser height 47 mm(1.9 in.) C Ground clearance 320 mm(13in.) D Machine length (with draw bar) 4420 mm(174 in.) E Machine length (without draw bar) 4405 mm(173in.) F Max. lifting height of blade 900 mm(35 in.) G Max. digging depth of blade 450 mm(17.7 in.) H Digging angle of blade 55°±3°(deg.) I Blade width 2680 mm(106 in.) 3150 mm(124 in.) J Blade height 1090 mm(42.9 in.) K Max blade turning angle on ground 25°(deg.) L Machine length when blade in max turning angle 2474 mm(97 in.) 2896 mm(114 in.) M Max tilt height of blade 389 mm(15 in.) 457 mm(18 in.) N Vertical distance from left track shoe outside to blade outside when blade in max turning angle 4 mm(0.2 in.) 64 mm(2.5 in.) O Track shoes outside width 2110 mm(83 in.) 2400 mm(95 in.) P Vertical distance from right track shoe outside to blade outside when blade in max turning angle 364 mm(14 in.) 432 mm(17 in.) PARAMETER OF RIPPER(Three-shank ripper) Q Max. ripping depth 340 mm(13.4 in.) R Max. lifting height 440 mm(17.3 in.) S Ripper length (at deepest ripping) 1366 mm(53.8 in.) S’ Ripper width 972 mm(38.3 in.) T Departure angle (at highest lifting) 1766 mm(69.5 in.) V Ripping width 1696 mm(66.8 in.) W Distance between ripper teeth 800 mm(31.5 in.) BULLDOZER SERIES DH08-B2 TECHNICAL PARAMETERS

DH10-B2 ENGINE MODEL WEICHAI WP4 GROSS POWER 74 KW(99 HP) OPERATING WEIGHT XL:9850KG LGP:10300KG BULLDOZER SERIES LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ที� 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai www.facebook.com

* THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. ENGINE Engine WEICHAI WP4 Emission Tire-II Rated revolution 2000rpm Gross power 82kW(110hp) Net power 74kW(99hp) Displacement 4.5L(274cu.in) Max. torque 460Nm(339lb.-ft.)/1300-1500rpm DRIVE SYSTEM Drive system Independent dual-circuit electric control hydrostatic drive, intelligent matching of speed-load System overflow pressure 42500KPa(6162.5psi) Traveling speed Forward 0~9 km/h(5.6 mph) Backward 0~9 km/h(5.6 mph) Max. theoretical traction force 155.2kN(34914lb.) Steering Independent drive of track at both sides to ensure the full power output for pivot steering and steering with load Brake Regular closed multi-disk brake FINAL DRIVE Primary spur gear + primary planetary reduction CHASSIS SYSTEM XL LGP Type Rigid type suspension Rigid type suspension Track shoe type Single gouser Single gouser Track gauge 1650mm(65in.) 1790mm(70in.) Width of track shoe 460mm(18in.) 630mm(25in.) Track grounding length 2320mm(91in.) 2320mm(91in.) Track grounding area 21344cm²(3308sq.in.) 29232cm²(4531sq.in.) Number of track shoe 39pcs/single side 39pcs/single side Grounding pressure (standard configuration) 46.1kPa(6.69psi) 35.2kPa(5.11psi) Number of carrier roller 2pcs/single side 2pcs/single side Number of track roller 6pcs/single side 6pcs/single side Pitch 171.45mm(6.75in.) 171.45mm(6.75in.) Minimum turning radius 3066 mm(120 in.) 3176 mm(125 in.) VOLUME Fuel capacity 197L(52gal.) Coolant liquid capacity 19L(5.0gal.) Engine oil capacity 15L(4gal.) Hydraulic oil tank 53L(14gal.) Final drive 5.8L(1.53gal.)/single side OPERATING WEIGHT XL LGP With Cabin+ draw bar 9850kg(21715lb.) 10300kg(22708lb.) With Cabin+ ripper 10550kg(23259lb.) 11000kg(24251lb.) BLADE XL LGP Blade type PAT PAT Blade capacity 2.32 m³(3.03cu.yd.) 2.6m³(3.4cu.yd.) DIMENSION XL LGP A Machine height (without ROPS) 2885mm(114in.) 2885mm(114in.) B Track grouser height 50mm(2.0in.) 50mm(2.0in.) C Ground clearance 340mm(13.4in.) 340mm(13.4in.) D Machine length (with draw bar) 4442mm(175in.) 4442mm(175in.) E Machine length (without draw bar) 4427mm(174in.) 4427mm(174in.) F Max. lifting height of blade 3892 mm(153 in.) 3892 mm(153 in.) G Max. digging depth of blade 900mm(35in.) 900mm(35in.) H Digging angle of blade 450mm(17.7in.) 450mm(17.7in.) I Blade width 55°±3°(deg.) 55°±3°(deg.) J Blade height 2860mm(113in.) 3200mm(126in.) K Max blade turning angle on ground 1008mm(39.7in.) 1008mm(39.7in.) L Machine length when blade in max turning angle 25°(deg.) 25°(deg.) M Max tilt height of blade 2633mm(104in.) 2941mm(116in.) N Vertical distance from left track shoe outside to blade outside when blade in max turning angle 415mm(16in.) 458mm(18in.) O Track shoes outside width 70mm(2.8in.) 70mm(2.8in.) P Vertical distance from right track shoe outside to blade outside when blade in max turning angle 2110mm(83in.) 2420mm(95in.) PARAMETER OF RIPPER(Three-shank ripper) Q Max. ripping depth 340 mm(13.4 in.) 340 mm(13.4 in.) R Max. lifting height 440 mm(17.3 in.) 440 mm(17.3 in.) S Ripper length (at deepest ripping) 1366 mm(53.8 in.) 1366 mm(53.8 in.) S’ Ripper width 972 mm(38.3 in.) 972 mm(38.3 in.) T Departure angle (at highest lifting) 1766 mm(69.5 in.) 1766 mm(69.5 in.) V Ripping width 1696 mm(66.8 in.) 1696 mm(66.8 in.) W Distance between ripper teeth 800 mm(31.5 in.) 800 mm(31.5 in.) BULLDOZER SERIES DH10-B2 TECHNICAL PARAMETERS

DH10-C2 ENGINE MODEL CUMMINS QSF3.8 GROSS POWER 86KW(115HP) OPERATING WEIGHT XL:9200KG LGP:9500KG BULLDOZER SERIES LET’S MAKE CONSTRUCTION EASIER www.facebook.com บริษัท เอเซีย วีฮิเคล คอร์เปอเรช�ัน จํากัด 6/57 หมู่ที�2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai

* THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. ENGINE Engine Cummins QSF3.8 Emission US EPA Tier3 、EU StageⅢA Rated revolution 2200rpm Gross power 86kW(115hp) Net power 80kW(107hp) Displacement 3.8L(232cu.in) Max. torque 470Nm(347lb.-ft.)/1320rpm DRIVE SYSTEM Drive system Dual-circuit electric control hydrostatic drive, intelligent matching of load changes System overflow pressure 42500KPa(6162.5psi) Traveling speed Forward 0~9 km/h(5.6 mph) Backward 0~9 km/h(5.6 mph) Max. theoretical traction force 155.2kN(34914lb.) Steering Hydraulic motor differential steering, pivot steering, steering with load Brake Regular closed brake FINAL DRIVE Two-stage planetary gear reduction CHASSIS SYSTEM XL LGP Type Rigid type suspension Rigid type suspension Track shoe type Single grouser dry type Single grouser dry type Track gauge 1650mm(65in.) 1790mm(70in.) Width of track shoe 460mm(18in.) 630mm(25in.) Track grounding length 2360mm(93in.) 2360mm(93in.) Track grounding area 21712cm²(3365sq.in.) 29736cm²(4929sq.in.) Number of track shoe 39pcs/single side 39pcs/single side Grounding pressure (standard configuration) 43.9kPa(6.21psi) 33.6kPa(4.81psi) Number of carrier roller 2pcs/single side 2pcs/single side Number of track roller 6pcs/single side 6pcs/single side Pitch 171.45mm(6.75in.) 171.45mm(6.75in.) Minimum turning radius - - VOLUME Fuel capacity 197L(52gal.) Coolant liquid capacity 19L(5.0gal.) Engine oil capacity 15L(4gal.) Hydraulic oil tank 53L(14gal.) Final drive 5L(1.32gal.)/single side OPERATING WEIGHT XL LGP With Cabin+ draw bar 9200kg(20283lb.) 9500kg(20944b.) With Cabin+ ripper 9917kg(21863lb.) 10217kg(22525lb.) BLADE XL LGP Blade type PAT PAT Blade capacity 1.98 m³(2.6cu.yd.) 2.25m³(2.94cu.yd.) DIMENSION XL LGP A Machine height (without ROPS) 2885mm(114in.) 2885mm(114in.) B Track grouser height 50mm(2.0in.) 50mm(2.0in.) C Ground clearance 390mm(15.4in.) 390mm(15.4in.) D Machine length (with draw bar) 4442mm(175in.) 4442mm(175in.) E Machine length (without draw bar) - - F Max. lifting height of blade 900mm(35in.) 900mm(35in.) G Max. digging depth of blade 450mm(17.7in.) 450mm(17.7in.) H Digging angle of blade 55°±3°(deg.) 55°±3°(deg.) I Blade width 2860mm(113in.) 3200mm(126in.) J Blade height 1151mm(45.3in.) 1151mm(45.3in.) K Max blade turning angle on ground 25°(deg.) 25°(deg.) L Machine length when blade in max turning angle 2633mm(104in.) 2941mm(116in.) M Max tilt height of blade 415mm(16in.) 458mm(18in.) N Vertical distance from left track shoe outside to blade outside when blade in max turning angle 70mm(2.8in.) 70mm(2.8in.) O Track shoes outside width 2110mm(83in.) 2420mm(95in.) P Vertical distance from right track shoe outside to blade outside when blade in max turning angle 453mm(18in.) 453mm(18in.) BULLDOZER SERIES DH10-C2 TECHNICAL PARAMETERS

DH13-B2 ENGINE MODEL WP6G140E22 GROSS POWER 105KW(141HP) OPERATING WEIGHT XL: 13400KG BULLDOZER SERIES LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ที 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai www.facebook.com

* THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. DIMENSION XL A Machine height 3047mm(120in.) B Track grouser height 50mm(2.0in.) C Ground clearance 365mm(14.4in.) D Machine length (with draw bar) 4924mm(194in.) E Machine length (without draw bar) 4848mm(191in.) F Max. lifting height of blade 950mm(37in.) G Max. digging depth of blade 460mm(18.1in.) H Digging angle of blade 55°±3°(deg.) I Blade width 3060mm(120in.) J Blade height 1120mm(40in.) K Max blade turning angle on ground 25°(deg.) L Machine length when blade in max turning angle 2813mm(111in.) M Max tilt height of blade 460mm(18in.) N Vertical distance from left track shoe outside to blade outside when blade in max turning angle 49mm(1.9in.) O Track shoes outside width 2340mm(92in.) P Vertical distance from right track shoe outside to blade outside when blade in max turning angle 424mm(17in.) ENGINE XL Engine WP6G140E22 Emission China-II Rated revolution 2200rpm Gross power 105kW(141hp) Net power 100kW(134hp) Displacement 6.75L(412cu.in) Max. torque 560N.m(413lb.-ft.)/1400-1600rpm DRIVE SYSTEM XL Drive system Independent dual-circuit electric control hydrostatic drive, intelligent matching of speed-load System overflow pressure 43500KPa(6309psi) Traveling speed Forward 0~10km/h(6.2mph) Backward 0~10km/h(6.2mph) Max. theoretical traction force 212kN(47692lb.) Steering Independent drive of track at both sides to ensure the full power output for pivot steering and steering with load Brake Regular closed multi-disk brake FINAL DRIVE Primary spur gear + primary planetary reduction CHASSIS SYSTEM XL Type Rigid type suspension Track shoe type Single grouser Track gauge 1780mm(70in.) Width of track shoe 560mm(22in.) Track grounding length 2640mm(104in.) Track grounding area 29568cm²(4583sq.in.) Number of track shoe 40 pcs/single side Grounding pressure (standard configuration) 44.4kPa(6.56psi) Number of carrier roller 2 pcs/side Number of track roller 7pcs/side Pitch 190mm(7.48IN.) Minimum turning radius 3324mm(131IN.) VOLUME XL Fuel capacity 238L(63gal.) Coolant liquid capacity 26.5L(7.0gal.) Engine oil capacity 16L(4.2gal.) Hydraulic oil tank 55L(14.5gal.) Final drive 20L(5.33gal.) OPERATING WEIGHT XL Operating weight (Traction frame) 13400kg(29542lb.) Operating weight (Ripper) 14417kg(31784lb.) Operating weight(Winch) - BLADE XL Blade type PAT Blade capacity 3.07 m³(4.0cu.yd.) BULLDOZER SERIES DH13-B2 TECHNICAL PARAMETERS

DH13-B2 ENGINE MODEL WP6G140E22 GROSS POWER 105KW(141HP) OPERATING WEIGHT XL: 13400KG BULLDOZER SERIES LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ที 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai www.facebook.com

* THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. DIMENSION XL A Machine height 3047mm(120in.) B Track grouser height 50mm(2.0in.) C Ground clearance 365mm(14.4in.) D Machine length (with draw bar) 4924mm(194in.) E Machine length (without draw bar) 4848mm(191in.) F Max. lifting height of blade 950mm(37in.) G Max. digging depth of blade 460mm(18.1in.) H Digging angle of blade 55°±3°(deg.) I Blade width 3060mm(120in.) J Blade height 1120mm(40in.) K Max blade turning angle on ground 25°(deg.) L Machine length when blade in max turning angle 2813mm(111in.) M Max tilt height of blade 460mm(18in.) N Vertical distance from left track shoe outside to blade outside when blade in max turning angle 49mm(1.9in.) O Track shoes outside width 2340mm(92in.) P Vertical distance from right track shoe outside to blade outside when blade in max turning angle 424mm(17in.) ENGINE XL Engine WP6G140E22 Emission China-II Rated revolution 2200rpm Gross power 105kW(141hp) Net power 100kW(134hp) Displacement 6.75L(412cu.in) Max. torque 560N.m(413lb.-ft.)/1400-1600rpm DRIVE SYSTEM XL Drive system Independent dual-circuit electric control hydrostatic drive, intelligent matching of speed-load System overflow pressure 43500KPa(6309psi) Traveling speed Forward 0~10km/h(6.2mph) Backward 0~10km/h(6.2mph) Max. theoretical traction force 212kN(47692lb.) Steering Independent drive of track at both sides to ensure the full power output for pivot steering and steering with load Brake Regular closed multi-disk brake FINAL DRIVE Primary spur gear + primary planetary reduction CHASSIS SYSTEM XL Type Rigid type suspension Track shoe type Single grouser Track gauge 1780mm(70in.) Width of track shoe 560mm(22in.) Track grounding length 2640mm(104in.) Track grounding area 29568cm²(4583sq.in.) Number of track shoe 40 pcs/single side Grounding pressure (standard configuration) 44.4kPa(6.56psi) Number of carrier roller 2 pcs/side Number of track roller 7pcs/side Pitch 190mm(7.48IN.) Minimum turning radius 3324mm(131IN.) VOLUME XL Fuel capacity 238L(63gal.) Coolant liquid capacity 26.5L(7.0gal.) Engine oil capacity 16L(4.2gal.) Hydraulic oil tank 55L(14.5gal.) Final drive 20L(5.33gal.) OPERATING WEIGHT XL Operating weight (Traction frame) 13400kg(29542lb.) Operating weight (Ripper) 14417kg(31784lb.) Operating weight(Winch) - BLADE XL Blade type PAT Blade capacity 3.07 m³(4.0cu.yd.) BULLDOZER SERIES DH13-B2 TECHNICAL PARAMETERS

DH16-K2 ENGINE MODEL FIAT N67 GROSS POWER 118KW(158HP) OPERATING WEIGHT XL:17635KG(38660LB.) LGP:18800KG(41228LB.) BULLDOZER SERIES LET’S MAKE CONSTRUCTION EASIER www.facebook.com บริษัท เอเซีย วีฮิเคล คอร์เปอเรชัน จํากัด� 6/57 หมทีู่ 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai

* THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. DIMENSION XL LGP A Machine height 3180mm(126in.) B Track grouser height 65 mm(2.5 in.) C Ground clearance 370 mm(14.6 in.) D Machine length (with draw bar) 5800mm(228in.) E Machine length (without draw bar) 5545mm(218.5in.) F Max. lifting height of blade 1065mm(41.9 in.) G Max. digging depth of blade 675mm(26in.) H Digging angle of blade 55°-60°(deg.) I Blade width 3400 mm(133.9 in.) 4011 mm(157.9 in.) J Blade height 1200 mm(47.2 in.) 1195 mm(47in.) K Max blade turning angle on ground 25°(deg.) L Machine length when blade in max turning angle 3002mm(118 in.) 3644mm(143 in.) M Max tilt height of blade 448mm(17.6in.) 528mm(20.8in.) N Vertical distance from left track shoe outside to blade outside when blade in max turning angle 46 mm(1.8 in.) 21 mm(0.8 in.) O Track shoes outside width 2600mm(97.9in.) 3160mm(120.4in.) P Vertical distance from right track shoe outside to blade outside when blade in max turning angle 506mm(22.1in.) 482mm(21.3in.) PARAMETER OF RIPPER(Three-shank ripper :1493kg(3291lb.)) Q Max. ripping depth 572mm(22in.) R Max. lifting height 492mm(19in.) S Ripper length (at deepest ripping) 1785mm(70.2in.) S’ Ripper width 1298mm(51.0in.) T Departure angle (at highest lifting) 2082mm(82in.) U Tilt angle(at highest point) 43°(deg.) V Ripping width 1900 mm(75 in.) W Distance between ripper teeth 950mm(37in.) WINCH PARAMETERS(Hydraulic winch (H6H): 2138kg(4713.5lb)) Diameter of steel rope 22/25mm(0.866/0.984in.) Maximum rope capacity of drum 91/70m(298 ft.7in./229ft.7in.) Maximum tension(Bare drum) 40733kg(89800lb) Maximum tension(Full drum) 23420kg(51632lb) Maximum speed of the rope(Bare drum) 18m/min (35.5 ft.7in./min) Length of winch 1439mm(56.7in.) ENGINE Engine FIAT N67 Emission EPA Tier 4 Final / EU Stage IV Rated revolution 2100rpm Gross power 142 kW(190hp) Net power 140kW(187hp) Number of cylinder-bore × stroke 6-104mm-132mm(6-4in.-5in.) Displacement 6.7L(409cu.in) Max. torque 850Nm(627lb.-ft.)/1400rpm Cooling system Smart hydraulic control DRIVE SYSTEM Drive system Independent dual-circuit electric control hydrostatic drive, intelligent matching of speed-load System overflow pressure 43500 KPa(6309.1 psi) Traveling speed Forward 0~10km/h(5.6mph) Backward 0~10km/h(5.6mph) Max. theoretical traction force 230kN(35000lb) Steering Independent drive of track at both sides to ensure the full power output for pivot steering and steering with load Brake Regular closed multi-disk brake FINAL DRIVE Primary spur gear + primary planetary reduction CHASSIS SYSTEM XL LGP Type Rigid type suspension Track shoe type Single grouser Track gauge 2040 mm(80.3 in.) 2350 mm(92.5 in.) Width of track shoe 560 mm(22 in.)//610mm(24 in.) 810 mm(32 in.) Track grounding length 3075mm(121in.) Track grounding area 34440/37515cm²(5338/5815sq.in.) 49815cm²(7721sq.in.) Number of track shoe 43pcs/single side Grounding pressure (standard configuration) 50kPa(7.25psi)/ 45.9kPa(6.66psi) 36.9kPa(5.35psi) Number of carrier roller 2 pcs/side Number of track roller 8pcs/side Pitch 203mm(7.48IN.) Minimum turning radius 3879mm(152.7in.) 4012mm(158in.) VOLUME Fuel capacity 389 L(102.7 gal.) Coolant liquid capacity 29 L(7.7 gal.) Engine oil capacity 20 L(5.3 gal.) Hydraulic oil tank 165 L(43.6 gal.) Final drive 31L(8.2 gal.)/single side DEF capacity 43L(11.4 gal.) OPERATING WEIGHT XL LGP Operating weight (Traction frame) 17635kg(38660lb.) 18800kg(41228lb.) Operating weight (Ripper) 19160KG(42022lb.) 20345KG(44616lb.) Operating weight(Winch) 19710KG(43235lb.) - BLADE XL LGP Blade type PAT PAT Blade capacity 3.5cu.m(4.58cu.yd.) 4.15cu.m(5.5cu.yd.) BULLDOZER SERIES DH16-K2 TECHNICAL PARAMETERS

DH17-B2 ENGINE MODEL WEICHAI WD10G190E214 GROSS POWER 140KW(188HP)@1900 OPERATING WEIGHT XL: 17600KG LGP: 19460KG BULLDOZER SERIES LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชัน จํากัด� 6/57 หม่ทีู 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai www.facebook.com

* THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. ENGINE Engine Weichai WD10G190E214 Emission China-II Rated revolution 1900rpm Gross power 140kW(188hp)@1900 Net power 127kW(170hp)@1900 Number of cylinderbore×stroke 6-126mm*130mm Displacement 9.726L Max. torque 900Nm@1400-1600rpm Cooling system Mechanic fan DRIVE SYSTEM Drive system Independent dualcircuit electric control hydrostatic drive, intelligent matching of speedload, “stepless” variable speed, monolever control of travel, speed and steering; steering with load, pivot steering, work �exibly, high ef�ciency, easy for maintenance System over�ow pressure 45000kPa Traveling speed Forward 0~10km/h Backward 0~10km/h Max. theoretical traction force 288.8kN Steering Independent drive of track at both sides to ensure the full power output for pivot steering and steering with load Brake Regular closed multi-disk brake FINAL DRIVE Primary spur gear + primary planetary reduction CHASSIS SYSTEM XL RS CH LGP WH Type Pivot, equalizing beam suspended type, semi-rigid structure Track shoe type Single grouser Wetland type/ Single grouser Wetland type Track gauge 1880mm 2350mm Width of track shoe 510/560/ 610mm 610mm 610/510/ 560mm 1100/950/ 900mm 1100/ 950mm Track grounding length 2675mm 2935mm Track grounding area 27285cm² 32635cm² 64570cm² Number of  track shoe 39 pcs/side 42 pcs/side Grounding pressure (standard con�guration) 64.5kPa 55.5kPa 55kPa 30.1kPa 30.4kPa Number of  carrier roller 2 pcs/side Number of  track roller 7pcs/side Pitch 203MM VOLUME Fuel capacity 305L Coolant liquid capacity 54L Engine oil capacity 24L Hydraulic oil tank (travel) 60L Hydraulic oil tank (work) 65L Final drive 31/35L/side OPERATING WEIGHT XL RS CH LGP WH Operating weight (standard) 17600kg 18100kg 17960kg 19460kg 19600kg Weight of ripper 1493kg - BLADE XL RS CH LGP WH Blade type Semi-U/ straight -tilt blade Straighttilt blade (heavy duty) Coal -blade Straight -tilt blade Waste handling blade Blade capacity 4.7/3.6m³ 4.3m³ 6.2m³ 3.8m³ 8.3m³ DIMENSION XL RS CH LGP WH A Machine height 3080mm 3091mm B Track grouser height 65mm 75mm 65mm 101.5/ 65mm (Wetland type)/ (Single grouser) C Ground clearance 370mm D Machine length (with draw bar) 5568mm 5658mm E Machine length (without draw bar) 5250mm 5340mm F Max. lifting height of blade 1010mm G Max. digging depth of blade 520mm 485mm H Digging angle of blade 55°±3°(deg.) I Blade width 3400/3388mm Semi-U/ straight-tilt 3455mm 3900mm 4150mm J Blade height 1200/1149mm Semi-U/ straight-tilt 1317mm 1200mm 977mm 1600mm O Width from end of left track shoe to end of right track shoe (standard) 2390mm 2490mm 3450mm PARAMETER OF RIPPER TYPE Three-shank ripper Weight 1493kg Q Max. ripping depth 475mm R Max. lifting height 570mm S Ripper length (at deepest ripping) 1809mm T Ripper width 2082mm U Departure angle (at highest lifting) 32.1° V Ripping width 1900mm W Distance between ripper teeth 950mm BULLDOZER SERIES DH17-B2 TECHNICAL PARAMETERS

Engine Model: Weichai WP7G207E304 Gross Power: 152kW(204hp)@1800 Operating Weight: XL: 17,730kg (39087 LB.) LGP: 19,690kg (43409 LB.) Crawler Dozer DH17-C3 Linde Hydrostatic Travel Drive electronic control

LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ที 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 � TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai * THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. ENGINE Engine Weichai WP7G207E304 Emission China-III Rated revolution 1800rpm Gross power Heavy load: 152kW(204hp)@1800 Standard: 141kW(189hp)@1800 Light load: 120kW(161hp)@1800 Net power Heavy load: 139kW(186hp)@1800 Standard: 128kW(172hp)@1800 Light load: 107kW(143hp)@1800 Number of cylinder-bore × stroke 6-126mm*130mm Displacement 7.47L Max. torque 975Nm@1200-1400rpm Min. fuel consumption 200g/kW.h Cooling system Mechanic fan DRIVE SYSTEM Drive system Independent dual-circuit electric control hydrostatic drive, intelligent matching of speed-load, “stepless” variable speed, mono-lever control of travel, speed and steering; steering with load, pivot steering, work flexibly, high efficiency, easy for maintenance System overflow pressure 45000 kPa Traveling  speed Forward 0~10km/h Backward 0~10km/h Max. theoretical traction force 288.8kN Steering Independent drive of track at both sides to ensure the full power output for pivot steering and steering with load Brake Regular closed multi-disk brake Final drive Primary spur gear + primary planetary reduction CHASSIS SYSTEM XL LGP Type Pivot, equalizing beam suspended type, semirigid structure Track shoe type Single grouser Wetland / Single grouser Track gauge 1880mm 2350mm Width of track shoe 510/560/610mm 1100/950/850/ 810mm(Wetland) Track grounding length 2675mm 2935mm Track grounding area 27285cm² 64570cm² Number of  track shoe 39 pcs/side 42 pcs/side Grounding pressure (standard configuration) 63.7kPa 31.1kPa Number of  carrier roller 2 pcs/side 2 pcs/side Number of  track roller 7pcs/side 7pcs/side Pitch 203mm 203mm OPERATING WEIGHT XL LGP Standard 17730kg 19690kg BLADE XL LGP Blade type Semi-U/straight tilt Straight tilt Blade capacity 4.7/4.5m³ 3.8m³ DIMENSION XL LGP Machine height (without ROPS) 3154mm 3191mm Track grouser height 65mm 101.5mm(Wetland type) Ground clearance 410 mm 410 mm Machine length(with draw bar) 5352mm 5486mm Machine length(without draw bar) 5058mm 5225mm Max. lifting height of blade 1010mm 1010mm Max. digging depth of blade 520mm 485mm Digging angle of blade 55°±3° 55°±3° Blade width 3400/3388mm Semi-U/straight-tilt 4150mm Blade height 1200/1149mm Semi-U/straight tilt 977mm Width from end of left  track shoe to end of right  track shoe (standard) 2390mm 2590mm Min turning radius 3745/3600mm Semi-U/straight tilt 3895mm RIPPER (THREE-SHANK RIPPER :1493KG) Max. ripping depth 475mm Max. lifting height 570mm Ripper length (at deepest ripping) 1809mm Ripper length (at highest ripping) 1671mm Departure angle (at highest lifting) 2082mm Tilt angle(at highest point) 32.1° Ripping width 1900mm Distance between ripper teeth 950mm DH17-C3SPECIFICATIONS REFILL CAPACITY Fuel capacity 352L Coolant liquid capacity 49L Engine oil capacity 24L Hydraulic oil tank 85L Final drive 32L/side 35L/side A B C D E F G H J I O www.facebook.com

DH24-B2 ENGINE MODEL WEICHAI WD12G250E202 GROSS POWER 185KW(248HP) OPERATING WEIGHT XL: 23850KG LGP: 26450KG BULLDOZER SERIES LET’S MAKE CONSTRUCTION EASIER www.facebook.com บริษัท เอเซีย วีฮิเคล คอร์เปอเรช�ัน จํากัด 6/57 หมู่ ที�2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai

* THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. ENGINE Engine Weichai WD12G250E202 Emission China-III Rated revolution 2100rpm Gross power 185kW(248hp) Net power 167kW(224hp) Number of cylinderbore×stroke 6-126mm*155mm Displacement 11.596L Max. torque 1200Nm@1300-1400rpm Cooling system Mechanic fan DRIVE SYSTEM Drive system Independent dualcircuit electric control hydrostatic drive, intelligent matching of speedload, “stepless” variable speed, monolever control of travel, speed and steering; steering with load, pivot steering, work flexibly, high efficiency, easy for maintenance System overflow pressure 45000kPa Traveling speed Forward 0~11km/h Backward 0~11km/h Max. theoretical traction force 368kN Steering Independent drive of track at both sides to ensure the full power output for pivot steering and steering with load Brake Regular closed multi-disk brake FINAL DRIVE Double-reduction final drives of spur gear and planetary gear CHASSIS SYSTEM XL CH LGP WH Type Pivot, equalizing beam suspended type, semirigid structure Track shoe type Single grouser Wetland type Track gauge 2000mm 2250mm Width of track shoe 560/610/660mm 610/660mm 910mm Track grounding length 3050mm 3482mm Track grounding area 34160cm² 63372cm² Number of track shoe 41 pcs/side 45 pcs/side Grounding pressure (standard configuration) 68.3kPa 64.5kPa 40.9kPa 41.8kPa Number of carrier roller 2 pcs/side Number of track roller 7pcs/side 8 pcs/side Pitch 216MM VOLUME Fuel capacity 390L Coolant liquid capacity 61L Engine oil capacity 24L Hydraulic oil tank (travel) 64L Hydraulic oil tank (work) 95L Final drive 37L/side Transfer case 6L OPERATING WEIGHT XL CH LGP WH Operating weight (standard) 23850kg 24505kg 26450kg 27080kg Weight of ROPS frame 448kg BLADE XL CH LGP WH Blade type Semi-U U-blade Swamp straighttilt blade Waste handling blade Blade capacity 6.5m³ 7.5m³ 6.42m³ 12.86m³ DIMENSION XL CH LGP WH A Machine height (without ROPS) 3192mm 3192mm 3228mm 3228mm A Machine height (with ROPS) 3466mm 3466mm 3500mm 3500mm B Track grouser height 72mm 72mm 123mm 123mm C Ground clearance 450mm D Machine length (with draw bar) 6095mm 6474mm 6255mm 6469 mm (mud scraper) E Machine length (without draw bar) 5972mm 6351mm 6132mm 6346mm F Max. lifting height of blade 1247mm 1265mm 1300mm 1300mm G Max. digging depth of blade 540mm 545mm 550mm 550mm H Digging angle of blade 52°±3°(deg.) I Blade width 3640mm 3800mm 4365mm 4365mm J Blade height 1580mm 1294mm 1400mm 1981mm Blade tilt height 500mm 500mm 560mm 560mm O Width from end of left track shoe to end of right track shoe (standard) 2560mm 2660mm 3160mm 3160mm PARAMETER OF RIPPER TYPE Three-shank ripper Weight 2646kg Q Max. ripping depth 655mm R Max. lifting height 567mm S Ripper length (at deepest ripping) 1882mm T Ripper width 2246mm U Departure angle (at highest lifting) 16.35° V Ripping width 2000mm W Distance between ripper teeth 1000mm BULLDOZER SERIES DH24-B2 TECHNICAL PARAMETERS www.facebook.com

Product features This model comes standard with an imported hydraulics system and is available with or without the optional sheep pad roller. Its design features a well-matched engine and hydraulic system for the ultimate in efficient operations and reduced operating costs. Having gone thru very stringent vibration tests and analyses, which led to greatly reduced vibrations, this machine can be expected to operate for a long life. Finally, it has the extra-added touch of having a very attractive designflow to its outward appearance. R oad Roller Series FULL-HYDRAULIC VIBRATORY ROLLER SR10/SR10P Middle-layer compacting road roller Engine model: Weichai WP4G110E220 Rated power: 82 kW/2200 rpm Operating weight: 10 t/11 t บริษัท เอเซีย วีฮิเคล คอร์เปอเรช�ัน จํากัด 6/57 หมู่ ที� 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai www.facebook.com

OVERALL DIMENSIONS MODEL: SR10 SR10P Weights Operating weight 10000 kg 11000 kg Axle load, drum 5400 kg 6400 kg Axle load, wheel 4600 kg 4600 kg Static linear load (at drum) 253 N/cm 300 N/cm Drum and tires Maximum working width 2130 mm Drum diameter 1500 mm 1650 mm Drum shell thickness 20 mm Number of padfeet — 132 Height of the padfoot — 95 mm Tire size 23.1-26-8PR 23.1-26-8PR WEIGHT AND DIMENSIONS Forward speed I 0~5.3 km/h II 0~9.9 km/h Reverse speed I 0~5.3 km/h II 0~9.9 km/h Maximum climbing ability 48% Drive system Hydrostatic DRIVE TRAIN Frequency High amplitude 30 Hz Low amplitude 35 Hz Nominal amplitude High 2 mm 1.7 mm Low 1.0 mm 0.85 mm Centrifugal force Maximum 270 kN Minimum 180 kN VIBRATORY SYSTEM Make & model Weichai WP4G110E220 Type Turbocharged Fuel Diesel Fuel capacity 230 L Cool Water Number of cylinders 4 Rated power 82 kW Rated speed 2200 rpm POWER TRAIN Electrical system DC, negative ground 24 V Alternator 28 V, 55 A Batteries – Brakes Service brake Hydrostatic Parking brake Spring-loaded/mechanical Steering Steering system Oscillating, articulating Steering method Hydrostatic CABIN & CONTROLS Overall length: 6010 mm Minimum turning radius: 5880 mm Overall width: 2305 mm Steering angle : ±35° Overall height: 3130 mm Oscillating angle : ±12° THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. SR10/SR10P FULL-HYDRAULIC VIBRATORY ROLLER SR10/SR10P Technical specifications: 2305 5860 2975 1500 3014 2180 1586 2130

LE56-X2 Electric Wheel Loader Performance delivered more than you expect zero emission, electric drive Battery capacity 282kW/h Battery Cruising ability 5-8 h Operating weight 17,800kg

LET’S MAKE CONSTRUCTION EASIER * THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. LE56-X2 BRAKES Service Brake Type Caliper disc brake Service Brake Actuation Hydraulic Parking Brake Type Drum brake Parking Brake Actuation Hydraulic TIRES Tire Size 23.5-25 L3 HYDRAULIC SYSTEM Main Pump Type Quantitative Dual-pump Main Relief Pressure 18 Mpa Raise time 5.5 S Total Cycle Time 10 S SERVICE CAPACITY Battery Cruising ability 5-8 h Hydraulic oil Tank 190 L Axles, each 27X2 L Transmission 30 L Cooling System 29 kg DIMENSIONS Length 8555 mm Width 3050 mm Height 3431 mm Wheelbase 3300 mm Wheel Tread 2250 mm Ground Clearance 440 mm Turn Angle, Either Side 35° Turning Radius, Outside of Tire 6688 mm Turning Radius, Center of Tire 6390 mm Turning Radius, Bucket Carry 7319 mm PWOER BATTERY Make CATL Model Cbox Capacity 282Kwh Rated Voltage 618V LOADER ARM PERFORMANCE Tipping Load - Full Turn 10000 kg Bucket Breakout Force 185 kN Maximum Dump Angle at Full Height 45° Dump Clearance at Full Height Discharge 3450 mm Dump Reach at Full Height Discharge 1191 mm Maximum Hinge Pin Height 4441 mm Maximum Digging Depth, Bucket Level 40 mm Bucket Capacity 3 m3 Operating Weight 17800kg WALKING MOTOR Maximum speed/rated speed 2500/955 Peak torque/rated torque 2100@30S/900@30M Peak power/rated power 150/90 @540VDC WORKING MOTOR Maximum speed/rated speed 4500/1600 Peak torque/rated torque 1000@60S/477@30M Peak power/rated power 120/80 @540VDC AXLES Total Reduction Ratio 22.853 Final Ratio/ Hub Reduction Ratio 4.625/4.94 TRANSMISSION Ratio (Forward & Reverse) I:3.488 II:1.806 III:1.126 IV:0.583 Travel Speed (Forward & Reverse) Km/h I: 7.5 II: 15 III: 24 IV: 42 STEERING Steering Configuration Articulated Steering System Pressure 15 Mpa SPECIFICATIONS บริษัท เอเซีย วีฮิเคล คอร์เปอเรช�ัน จํากัด 6/57 หมู่ ที�2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai www.facebook.com

DIMENSION All Dimensions are Approximate. Dimensions May Vary with Bucket. Refer to Operating Specifications. TECHNICAL PARAMETERS Operating Weight 3500kg Rated Payload 1230kg Bucket Capacity 0.54m3 BASIC Tipping Load 2460kg Breakout Force 28.06kN Traction Force 25.9kN LxWxH 3460x1820x2Q00 Engine Model A498BZG Rated Power 55kW/2500rpm Displacement 3.168L ENGINE Fuel consumption 245g/kw·h Stroke 98mm Bore 105mm Emission Standard Nation II Hydraulic Flow - Standard 91 Umin·2500rpm Type Mechanical Sen.o HYDRAULIC Hydraulic Pressure- Standard 21MPa SYSTEM Hydraulic Flow - High Flow 135Umin·2600rpm Loader Hydraulic Pressure 19 Mpa DRIVE T ra-.el Speed -F & R 11.8km/h TRAIN Tyre 12-16.5 NHS Voltage(V) 12 V ELECTRIC Capacity(Ah) 120 Ah SERVICE Chain Box, Each Side 9L REFILL Cooling System 12L CAPACITY Engine Crankcase 9L Fuel Tank 91L Hydraulic Tank 65L The following blank can be used for notes or comments. NO. DESCRIPTION UNIT DATA A Max.Operation Height mm 3880 B Bucket Pin Height mm 3060 C Cab Roof Height mm 2000 D Max.Height At Bucket Le-.eled mm 2870 E Length Without Attachment mm 2530 F Length With Standard Bucket mm 3460 H Dumping Height mm 2440 J Reach Rollback mm 610 M Wheelbase mm 1080 p Ground Clearance mm 180 R Front Turning Radius Without Attachment mm 1180 s Front Turning Radius mm 2050 T Rear Turning Radius mm 1580 u Tail Length mm 980 V Center Distance between Two Wheels mm 1320 w Bucket Width mm 1820 G Dumping Angle At Max.Height 0 40 K Bucket Angle On Ground 0 29 L Bucket Rollback Angle At Max.Height 0 96 Q Start Angle 0 28 CONFIGURATION OPTIONAL XIN CHAI Engine Cold Start Main Val-.e HUSCO Open Cab Main Pump SAUER Solid Tyre Working Pump PERMCO Spiral Drill Tra-.el Motor POCLAIN Excavator Air Conditioner Be-.el Sweeper Mechanical Sel"\O Closed Sweeper FOPS & ROPS Fork Snow Blade Snow Blower Tree Planter Four In One Bucket Detachable Bucket Tooth Detachable Bucket Blade Warm Air Blower Mass Flow System For more information on Looking products, Please contact our local agent: As manufacturer, WEICHAI has the right to constantly upgrade and imporve our products without informing to customers. The pictures in literatures are for reference only, the detailed specifications are subject to real products.

FSL75 WEICHAI SKID STEER LOADER Efficiency Rules the Future - ENGINE MODEL A498BZG - RA TED POWER: 55kW/2500rpm - OPERA TING WEIGHT: 3500kg - RATED PAYLOAD: 1230kg - BUCKET CAPACITY: 0.54m3 บริษัท เอเซีย วีฮิเคล คอร์เปอเรช�ัน จํากัด 6/57 หมู่ที�2 ตําบลบ้านสวน อําเภอเมืองชลบุรีจังหวัดชลบุรี20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai

MINI WHEEL LOADER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ ท 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 ี� TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 SH4NTUI Value That WorkssM

SPECIFICATIONS Model YUCHAI 4102 TURBO (Euro II) Rated Power kw 78 Engine Details Rated Speed rpm 2200 Bucket Capacity m3 Bucket Width (P) mm 2000 Loading Capacity kg 2000 Operation Weight kg 6000 Overall length (F) mm 6600 Operating Specifications Overall width (R) mm 2050 Overall Height (A) mm 2860 Dumping Height (M) mm 3600 Dumping Reach (I) mm 950 Wheel Base (E) mm 2780 Transmission type Automatic Transmission Performance Control type Joy stick Drive Axle Big wheel hub reduction Brake System Breakout Force kN Tyre Standard Tyre 16/70-20 '4------- ----1:1•1- -----� 02 • The specifications are subject to change without notice. The pictures may include options. The actual color & appearance of the product may differ from what is shown.

L36-B3 ENGINE MODEL WEICHAI WP6 RATED POWER 92 KW/2000 RPM OPERATING WEIGHT 10.5 T WHEEL LOADER SERIES LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ที 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 � TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai www.facebook.com

WHEEL LOADER SERIES L36-B3 TECHNICAL PARAMETERS * THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. SERVICE CAPACITY Fuel Tank 150 L Hydraulic oil Tank 160 L Engine Oil 18 L Axles, each 18X2 L Transmission 38 L Cooling System 26 kg DIMENSIONS Length 7170 mm Width 2484 mm Height 3235 mm Wheelbase 2700 mm Wheel Tread 1856 mm Ground Clearance 340 mm Turn Angle, Either Side 36° Turning Radius, Outside of Tire 5325 mm Turning Radius, Center of Tire 5100 mm Turning Radius, Bucket Carry 5920 mm ENGINE Emission Regulation Tier 2 / Stage II Make Weichai Model WP6G125E201 Rated Power 92 kW (125 hp) @ 2,000 rpm Max Torque 540 N · m Displacement 6.75 L Number of Cylinders 6 Aspiration Turbocharged LOADER ARM PERFORMANCE Tipping Load - Full Turn 6000 kg Bucket Breakout Force 105 kN Maximum Dump Angle at Full Height 45° Dump Clearance at Full Height Discharge 3057 mm Dump Reach at Full Height Discharge 906 mm Maximum Hinge Pin Height 3980 mm Maximum Digging Depth, Bucket Level 62 mm Bucket Capacity 1.7 m3 Operating Weight 10500kg TRANSMISSION Transmission Type Countershaft, power shift Torque Converter Single stage, three elements Maximum Travel Speed, fwd 37 km/h Maximum Travel Speed, rev 28 km/h Number of Speeds, fwd 4 Number of Speeds, rev 2 AXLES Differential Front Type Conventional Differential Rear Type Conventional Axle Oscillation ±12° STEERING Steering Confi guration Articulated Steering System Pressure 14 Mpa BRAKES Service Brake Type Caliper disc brake Service Brake Actuation Air over Hydraulic Parking Brake Type Flexible shaft control Parking Brake Actuation Mechanical TIRES Tire Size 17.5-25 L3 HYDRAULIC SYSTEM Main Pump Type Gear Main Relief Pressure 16 Mpa Raise time 5.1 S Total Cycle Time 9.0 S

L39-B3 Wheel Loader Engine Model: Weichai WP6G125E22 Gross Power: 92kW@2200rpm Operating Weight: 12,100kg Bucket Capacity: 3.0m3 Performance and comfort you can feel， Reliability you can trust！

BRAKES Service Brake Type Caliper disc brake Service Brake Actuation Air over Hydraulic Parking Brake Type Flexible shaft control Parking Brake Actuation Mechanical TIRES Tire Size 17.5-25 L3 HYDRAULIC SYSTEM Main Pump Type Gear Main Relief Pressure 16 Mpa Raise time 6.2 S Total Cycle Time 10.3 S SERVICE CAPACITY Fuel Tank 150 L Hydraulic oil Tank 160 L Engine Oil 18 L Axles, each 18X2 L Transmission 38 L Cooling System 26 kg DIMENSIONS Length 8653 mm Width 2750 mm Height 3235 mm Wheelbase 2900 mm Wheel Tread 1856 mm Ground Clearance 340 mm Turn Angle, Either Side 38° Turning Radius, Outside of Tire 5415 mm Turning Radius, Center of Tire 5190 mm Turning Radius, Bucket Carry 6748 mm ENGINE Emission Regulation Tier 2 / Stage II Make Weichai Model WP6G125E22 Rated Power 92 kW (125 hp) @ 2,200 rpm Max Torque 510 N · m Displacement 6.75 L Number of Cylinders 6 Aspiration Turbocharged LOADER ARM PERFORMANCE Tipping Load - Full Turn 5000 kg Rated load 2500 kg Maximum Dump Angle at Full Height 45° Dump Clearance at Full Height Discharge 4100 mm Dump Reach at Full Height Discharge 1442 mm Maximum Hinge Pin Height 5134 mm Maximum Digging Depth, Bucket Level 218 mm Bucket Capacity 3.0 m3 Operating Weight 12100kg TRANSMISSION Transmission Type Planetary, power shift Torque Converter / Maximum Travel Speed, fwd 38 km/h Maximum Travel Speed, rev 16.4 km/h Number of Speeds, fwd 2 Number of Speeds, rev 1 AXLES Differential Front Type Conventional Differential Rear Type Conventional Axle Oscillation ±12° STEERING Steering Configuration Articulated Steering System Pressure 14 Mpa L39-B3SPECIFICATIONS 6748 2750 380 2301 1856 3235 4100 1442 400 218 1300 2900 8653 340 300 LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ ที 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 www.facebook.com Line : @shantuithai * THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN.

SL50WN Wheel Loader Engine Model: Weichai WD10G220E23 Gross Power: 162kW@2000rpm Operating Weight: 17,100kg Bucket Capacity: 3m3 Performance and comfort you can feel， Reliability you can trust！

LET’S MAKE CONSTRUCTION EASIER * THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. BRAKES Service Brake Type Caliper disc brake Service Brake Actuation Air over Hydraulic Parking Brake Type Flexible shaft control Parking Brake Actuation Mechanical TIRES Tire Size 23.5-25 L3 HYDRAULIC SYSTEM Main Pump Type Gear Main Relief Pressure 18 Mpa Raise time 5.6 S Total Cycle Time 10.6 S SERVICE CAPACITY Fuel Tank 230 L Hydraulic oil Tank 170 L Engine Oil 20 L Axles, each 27X2 L Transmission 45 L Cooling System 60 kg DIMENSIONS Length 8005 mm Width 3030 mm Height 3540 mm Wheelbase 3250 mm Wheel Tread 2250 mm Ground Clearance 430 mm Turn Angle, Either Side 35° Turning Radius, Outside of Tire 6584 mm Turning Radius, Center of Tire 6290 mm Turning Radius, Bucket Carry 7260 mm ENGINE Emission Regulation Tier 2 / Stage II Make Weichai Model WD10G220E23 Rated Power 162 kW (220 hp) @ 2,000 rpm Max Torque 900 N · m Displacement 9.726 L Number of Cylinders 6 Aspiration Turbocharged LOADER ARM PERFORMANCE Tipping Load - Full Turn 10000 kg Bucket Breakout Force 185 kN Maximum Dump Angle at Full Height 45° Dump Clearance at Full Height Discharge 3200 mm Dump Reach at Full Height Discharge 1230 mm Maximum Hinge Pin Height 4185 mm Maximum Digging Depth, Bucket Level 40 mm Bucket Capacity 3 m3 Operating Weight 17100kg TRANSMISSION Transmission Type Planetary, power shift Torque Converter Single stage, four elements Maximum Travel Speed, fwd 40 km/h Maximum Travel Speed, rev 15 km/h Number of Speeds, fwd 2 Number of Speeds, rev 1 AXLES Differential Front Type Conventional Differential Rear Type Conventional Axle Oscillation ±12° STEERING Steering Configuration Articulated Steering System Pressure 18 Mpa SL50WN SPECIFICATIONS 3250 8005 6584 7260 บริษัท เอเซีย วีฮิเคล คอร์เปอเรช�ัน จํากัด 6/57 หมู่ที�2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 www.facebook.com Line : @shantuithai

L55-B5 Engine Model: Weichai WD10G220E23 Gross Power: 162kW(220HP)@2000rpm Operating Weight: 16,400kg Bucket Capacity: 3m3 Wheel Loader New Appearance better performance

BRAKES Service Brake Type Caliper disc brake Service Brake Actuation Air over Hydraulic Parking Brake Type Flexible shaft control Parking Brake Actuation Mechanical TIRES Tire Size 23.5-25-16PR HYDRAULIC SYSTEM Main Pump Type Gear Main Relief Pressure 18 Mpa Raise time 5.5 S Total Cycle Time 10.5 S SERVICE CAPACITY Fuel Tank 300 L Hydraulic oil Tank 170 L Engine Oil 21 L Axles, each 29X2 L Transmission 45 L Cooling System 65 kg DIMENSIONS Length 8220 mm Width 3066 mm Height 3450 mm Wheelbase 3250 mm Wheel Tread 2238 mm Ground Clearance 440 mm Turn Angle, Either Side 35° Turning Radius, Outside of Tire 6626 mm Turning Radius, Center of Tire 6326 mm Turning Radius, Bucket Carry 7200 mm ENGINE Emission Tier 2 / Stage II Model Weichai WD10G220E23 Rated Power 162 kW (220 hp) @ 2,000 rpm Max Torque 900 N · m Displacement 9.726 L Number of Cylinders 6 LOADER ARM PERFORMANCE Tipping Load - Full Turn 11000 kg Bucket Breakout Force 170 kN Maximum Dump Angle at Full Height 45° Dump Clearance at Full Height Discharge 3050 mm Dump Reach at Full Height Discharge 1120 mm Maximum Hinge Pin Height 4100 mm Maximum Digging Depth, Bucket Level 30 mm Bucket Capacity 3 m3 Operating Weight 16400kg TRANSMISSION Transmission Type Planetary, power shift Torque Converter Single stage, four elements Maximum Travel Speed, fwd 40 km/h Maximum Travel Speed, rev 15 km/h Number of Speeds, fwd 2 Number of Speeds, rev 1 AXLES Differential Front Type Conventional Differential Rear Type Conventional Axle Oscillation ±12° STEERING Steering Configuration Articulated Steering System Pressure 16 Mpa LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ที 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 � TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 www.facebook.com Line : @shantuithai * THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. L55-B5SPECIFICATIONS

L60-B5 Wheel Loader Engine Model: Weichai WD10G240E201 Gross Power: 178kW@2200rpm Operating Weight: 19,200kg Bucket Capacity: 3.6m3 Performance and comfort you can feel， Reliability you can trust！

BRAKES Service Brake Type Caliper disc brake Service Brake Actuation Air over Hydraulic Parking Brake Type Flexible shaft control Parking Brake Actuation Air brake TIRES Tire Size 23.5-25 HYDRAULIC SYSTEM Main Pump Type Gear Main Relief Pressure 21 Mpa Raise time 5.3 S Total Cycle Time 10.2 S SERVICE CAPACITY Fuel Tank 300 L Hydraulic oil Tank 175L Engine Oil 21 L Axles, each 41LX2 Transmission 45 L Cooling System 80 L DIMENSIONS Length 8778 mm Width 3080 mm Height 3481 mm Wheelbase 3380 mm Wheel Tread 2250 mm Ground Clearance 440 mm Turn Angle, Either Side 38° Turning Radius, Outside of Tire 6355 mm Turning Radius, Center of Tire 6028 mm Turning Radius, Bucket Carry 7132 mm ENGINE Emission Regulation Tier 2 / Stage II Make Weichai Model WD10G240E201 Rated Power 178 kW @ 2,200 rpm Max Torque 1000 N · m Displacement 9.726 L Number of Cylinders 6 Aspiration Turbocharged LOADER ARM PERFORMANCE Tipping Load - Full Turn 12000 kg Bucket Breakout Force 195 kN Maximum Dump Angle at Full Height 45° Dump Clearance at Full Height Discharge 3420 mm Dump Reach at Full Height Discharge 1038 mm Maximum Hinge Pin Height 4593 mm Maximum Digging Depth, Bucket Level 40 mm Bucket Capacity 3.6m³ Operating Weight 19200kg TRANSMISSION Transmission Type Planetary, power shift Torque Converter Single stage, four elements Maximum Travel Speed, fwd 39 km/h Maximum Travel Speed, rev 18 km/h Number of Speeds, fwd 2 Number of Speeds, rev 1 AXLES Differential Front Type - Differential Rear Type - Axle Oscillation ±12° STEERING Steering Configuration Articulated Steering System Pressure 17 Mpa L60-B5SPECIFICATIONS 7132 3420 8778 1038 6355 380 3481 3380 LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ที 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 � TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai * THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. www.facebook.com

LE60-X3 Electric Wheel Loader Performance delivered more than you expect transmission efficiency is 20% higher, Eco-friendly Battery capacity 282 kwh/350 kwh Continuous working period 4-8 h Operating weight 18,200 kg(282 kwh)/ 19,100 kg(350 kwh)

9050 1220 3400 27° 35° 440 2250 3030 7640 6530 6865 4500 3380 3440 9050 1220 3400 27° 35° 440 2250 3030 7640 6530 6865 4500 3380 3440 LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ที 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 � TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-5555 Line : @shantuithai www.facebook.com * THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. LE60-X3 BRAKES Service Brake Type Caliper disc brake Service Brake Actuation Caliper disc brake Parking Brake Type Drum brake Parking Brake Actuation Hydraulic TIRES Tire Size 23.5-25 L3 HYDRAULIC SYSTEM Main Pump Type Quantitative Dual-pump Main Relief Pressure 18 Mpa Raise time 5.5 S Total Cycle Time 9.5 S SERVICE CAPACITY Continuous working period 4-8 H Hydraulic oil Tank 190 L Axles, each 27X2 L Transmission 32 L Cooling System 29 L DIMENSIONS Length 9050 mm Width 3030 mm Height 3440 mm Wheelbase 3400 mm Wheel Tread 2250 mm Ground Clearance 440 mm Turn Angle, Either Side 35° Turning Radius, Outside of Tire 6865 mm Turning Radius, Center of Tire 6530 mm Turning Radius, Bucket Carry 7640 mm PWOER BATTERY Make CATL Model CATL Capacity 282 kw.h/350 kw.h Rated Voltage 618V/580V LOADER ARM PERFORMANCE Tipping Load - Full Turn 11600 kg Bucket Breakout Force 185 kN Maximum Dump Angle at Full Height 45° Dump Clearance at Full Height Discharge 3380 mm Dump Reach at Full Height Discharge 1220 mm Maximum Hinge Pin Height 4500 mm Maximum Digging Depth, Bucket Level 115 mm Bucket Capacity 5.0 m3 Operating Weight 18200/19100kg WALKING MOTOR Maximum speed/rated speed 3200/800 r/min Peak torque/rated torque 2400/1200 Nm Peak power/rated power 200/100 kw WORKING MOTOR Maximum speed/rated speed 3000/1900 r/min Peak torque/rated torque 800/400 Nm Peak power/rated power 160/80 kw AXLES Total Reduction Ratio 22.853 Final Ratio/ Hub Reduction Ratio 4.625/4.94 TRANSMISSION Ratio (Forward & Reverse) I: 2.752 II: 1.032 Travel Speed (Forward & Reverse) km/h I: 13 II: 33 STEERING Steering Configuration Articulated Steering System Pressure 18 MPa SPECIFICATIONS

SD13 ENGINE MODEL SHANGCHAI SC8D143G2B1 GROSS POWER 105KW(140HP)@1900rpm OPERATING WEIGHT 13700KG BULLDOZER SERIES LET’S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ที 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai www.facebook.com

* THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTU AL COLOR & APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN. BLADE SD13 SD13S SD13R Blade type Straight-tilt blade/ Angle blade Straight-tilt blade R blade Blade capacity 3m³/2.5m³ 2.7m³ 6.9m³ DIMENSION SD13 SD13S SD13R A Machine height (without ROPS) 2950mm 3000mm 3000mm B Track grouser height 50mm 102.5mm C Ground clearance 320mm D Machine length (without draw bar) 4492mm F Max. lifting height of blade 930mm G Max. digging depth of blade 545mm H Digging angle of blade 52°±3°(deg.) I Blade width 3185mm 3510mm 3510mm J Blade height 1140mm 1030mm 1592mm O Width from end of left track shoe to end of right track shoe (standard) 2340mm 2580mm 2580mm PARAMETER OF RIPPER (Three-shank ripper: 1310kg) Q Max. ripping depth 567mm R Max. lifting height 559mm S Ripper length (at deepest ripping) 1466mm T Ripper width 1762mm U Departure angle (at highest lifting) 45° V Ripping width 1592mm W Distance between ripper teeth 796mm ENGINE SD13 SD13S SD13R Engine SHANGCHAI SC8D143G2B1 DONGFENG CUMMINS 6CTA8.3-C145 Emission China-II Rated revolution 1900rpm Gross power 105kW(140hp)@1900rpm 108kw(145hp)@1900rpm Net power 95.5kW(130hp)@1900rpm Number of cylinderbore×stroke 6-114X135mm Displacement 8.27L 8.3L Max. torque 674N.m@1300rpm 674N.m@1300rpm Cooling system Mechanic fan DRIVE SYSTEM SD13 SD13S SD13R Drive system Manufactured by SHANTUI, with high working efficiency, low breakdown rate; torqflow transmission, 3 gears forward and 3 gears backward. Traveling speed Forward 0~3.2km/h, 0~5.9km/h, 0~9.8km/h Backward 0~3.9km/h, 0~7.1km/h, 0~11.9km/h Max. theoretical traction force 205.5kN 223.5kN 228kN Torque damper Spring damping Torque converter 3-element, single stage, 1-phase Transmission Planetary gear and torqflow transmission hydraulically actuated, forced lubrication Bevel gear shaft Spiral bevel gear, single-stage speed reduction, splash lubrication Steering clutch Wet multiple disc, disc spring loaded, hydraulically actuated, hand operated, interconnected with steering brake. Brake Wet, contracting band, foot operated with hydraulic booster Final drive Spur gear, double reduction ,splash lubrication CHASSIS SYSTEM SD13 SD13S SD13R Type Swing type of sprayed beam, suspended structure of equalizer bar Track shoe type Single grouser Wetland type Track gauge 1880mm Width of track shoe 460mm 700mm Track grounding length 2365mm Track grounding area 21758cm² 21758cm² Number of track shoe 38 pcs/side Grounding pressure (standard configuration) 0.054MPa 0.038MPa 0.039MPa Number of carrier roller 2 pcs/side Number of track roller 6pcs/side Pitch 190MM VOLUME SD13 SD13S SD13R Fuel capacity 280L Coolant liquid capacity 63.5L Engine oil capacity 25L Hydraulic oil tank 112L Transmission 34L Drive axle 63L Final drive 13L/side OPERATING WEIGHT SD13 SD13S SD13R Operating weight (standard) 13700kg 14900kg 15200kg BULLDOZER SERIES SD13 TECHNICAL PARAMETERS

2/2/66 14:48 SD13-Bulldozer-Sh https://en.shantui.com/product/pro-detail-2603955.htm PARAMETER Parameter name SD13 (Standard version) SD13S (Wetland v Performance parameters Operating weight (Kg) 13700 14900 Ground pressure (kPa) 53.8 38.4 Engine Engine model SC8D143G2B1（ChinaII）/SC8DK（China-III） SC8D143G2B1（II）/SC8DK（Chi Rated power/rated speed (kW/rpm) 105/1900 105/1900 Overall dimensions Overall dimensions of machine (mm) 4492*3185*2950 4492*3510*3000 Driving performance

hantui Construction Machinery Co., Ltd. 1/3 version) SD13R (Environmental sanitation version) SD13C (Coal version) 15200 13900 39.2 54.6 （Chinana-III） SC8D143G2B1（ChinaII）/SC8DK（China-III） SC8D143G2B1（ChinaII）/SC8DK（China-III） 105/1900 105/1900 4492*3510*3000 4492*3700*2950

2/2/66 14:48 SD13-Bulldozer-Sh https://en.shantui.com/product/pro-detail-2603955.htm Forward speed (km/h) F1：0-3.2 F2:0-5.9 F3:0- 9.8 F1：0-3.2 F2:0-5 9.8 Reversing speed (km/h) R1:0-3.9 R2:0-7.1 R3:0- 11.9 R1:0-3.9 R2:0-7.1 11.9 Chassis System Center distance of track (mm) 1880 1880 Width of track shoes (mm) 460 700 Ground length （mm） 2365 2365 Tank capacity Fuel tank (L) 300 300 Working device Blade type Straight tilting blade Straight tilting bla Digging depth (mm) 590 590 Ripper type Three-shank ——

hantui Construction Machinery Co., Ltd. 2/3 .9 F3:0- F1：0-3.2 F2:0-5.9 F3:0- 9.8 F1：0-3.2 F2:0-5.9 F3:0- 9.8 1 R3:0- R1:0-3.9 R2:0-7.1 R3:0- 11.9 R1:0-3.9 R2:0-7.1 R3:0- 11.9 1880 1880 700 560 2365 2365 300 300 de Sanitation blade Coal blade 590 590 —— ——

2/2/66 14:48 SD13-Bulldozer-Sh https://en.shantui.com/product/pro-detail-2603955.htm Ripping depth (mm) 567 ——

hantui Construction Machinery Co., Ltd. 3/3 —— ——

SD16 ENGINE MODEL WEICHAI WD10G178E25 GROSS POWER 131KW(175HP)@1850rpm OPERATING WEIGHT 17000KG BULLDOZER SERIES LET’S MAKE CONSTRUCTION EASIER www.facebook.com บริษัท เอเซีย วีฮิเคล คอร์เปอเรช�ัน จํากัด 6/57 หมูที่� 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai

LET'S MAKE CONSTRUCTION EASIER บริษัท เอเซีย วีฮิเคล คอร์เปอเรชั�น จํากัด 6/57 หมู่ที 2 ตําบลบ้านสวน อําเภอเมืองชลบุรี จังหวัดชลบุรี 20000 TEL : 038-190-999 SALE : 065-2726-565 , 065-7261-955 SERVICE : 081-8782-555 Line : @shantuithai

SD16 series Crawler Dozer

Performance Parameters: Length × Width × Height (mm) (excluding ripper): 5140×3388×3032 Operating Weight (t) (excluding ripper): 17 Engine Model: Weichai WD10G178E25 Net Power/Rated Speed (kW/rpm): 120/1850 Ground Pressure(Mpa): 0.067 Blade Type: Straight tilting blade Angle blade U blade Blade Capacity: 4.5 for straight tilting blade 4.3 for angle blade 5 for U blade Applicable Working Conditions: Bulldozing, digging, landfill, and other bulk operations. 160HP Bulldozer Series 01-02