The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by capintec, 2018-02-24 17:57:14

Illuminated Vial Shield Sell Sheet

Illuminated Vial Shield Sell Sheet

Illuminated Vial Shield Monitor solution volume while
withdrawing with ease!

The Illuminated Vial Shield is designed
to provide a lighted protective radiation
shield for vials containing radioactive
pharmaceutical solutions which are used
in both medical and research applications.
The shielded vial is illuminated by a gravity
sensitive battery powered lighting circuit
when the shield is turned upside down.
The shielding material consists of tungsten
with a leaded glass viewing window and
penetration in the lid for syringe access to
the solution in the vial. The tungsten ver-
sion has a sliding section in the lid which
can cover the penetration when not in use
for improved shielding. The illumination
circuitry allows the user to clearly observe
the volume of solution which remains in
the vial as various amounts are withdrawn
from the vial during use. The Illuminated
Vial Shield is available in two sizes, to ac-
commodate a 5 ml and 10 ml vial.

Item Dimensions
• ID: 1 1/16" (2.71cm)
• OD: 9/16" (3.97cm)
• Height: 3 11/16" (9/31cm)
• Tungsten Thickness: 1/4" (.64cm)
• Lead Glass Window: .24" (.6cm) thick
at 5.2 g/cm3
• Battery: 3V lithium CR 2450

Illuminated Vial Shield, 5/10ml:
Item #5530-2017

7 Vreeland Road, Florham Park, NJ 07932 • PH: 201.825.9500 or 800.631.3826 • WEB: www.capintec.com

Syringe Shields Lead Glass Syringe Shield syringe.
The tungsten alloy used gives a technologist maximum
This high density protection available. This syringe shield has a 2.2mm thick
lead glass shield tungsten wall, which is currently thicker than all other
provides almost 2.5 nuclear medicine syringe shields.
mm lead equivalent
shielding and offers Features
complete 360°
visibility. The • Unique sharp pins hold the syringe in shield
stainless steel • 2.2 mm thick tungsten wall is thickest on market
syringe holder fits • Bright yellow florescent interior for easy viewing
most 3 and 5 ml • One hand operation to remove syringe
syringes. The end 1 cc Pin-Tec Syringe Shield: Item #4300-0034
steel cap offers the 2cc Pin-Tec Syringe Shield: Item #4300-0060
protection from breaking. 3 cc Pin-Tec Syringe Shield: Item #4300-0035
5 cc Pin-Tec Syringe Shield: Item #4300-0036
Lead Glass Syringe Shield (3-5 ml): Item #4300-0619 10 cc Pin-Tec Syringe Shield: Item #4300-0037
Lead Glass Syringe Shield (up to 10 ml): Item #4300-0620
Pin-Tec™ BETA Syringe Shields
C-Tec™ Syringe Shield
The Pin-Tec ßETA Syringe Shield is designed using push clip
The C-Tec Syringe Shields by for one handed release. The clear acrylic allows full
Capintec offer efficient shielding, visibility of the volume in the syringe. One hand operation
while not restricting the ease of use assures ease-of-use. Available in 5 cc and 10 cc sizes.
even in the smallest hands.
Capintec's unique bright yellow Features
florescent gloss reflects light better,
which brightens the view of the • Uses the Pin-Tec design latch to hold syringe
syringe. This shield features a • Light weight and easy to position
plasticized rubber ring around the • Specifically designed for beta nuclides
glass, which prevents shattering Pin-Tec™ ßETA Syringe Shield (5/6 cc): Item #4300-0028
and reduces breakage. Pin-Tec™ ßETA Syringe Shield (10/12 cc): Item #4300-0029
A standard thumb screw holds the
syringe firmly in place. Both sides of Pin-Tec™ BETA Plus Syringe Shields
the syringe shield are taped for
insertion of the thumb screw The new Pin-Tec Beta Plus from Capintec will provide a
making it equally convenient for left superior level of protection for anyone handling pure beta
hand or right-hand users. emitting
radioisotopes.
Features The Pin-Tec
design utilizes
• Tungsten alloy with lead glass viewing port a double-
• Bright yellow florescent interior for easy viewing pronged grip
• Slim design for ease of use for maximum
• Unique rubber lining protects lead glass syringe hold
• 1.75mm tungsten wall thickness with an easy
1 cc C-Tec™ Syringe Shield: Item #4300-0030 release push
2 cc C-Tec™ Syringe Shield: Item# 4300-1059 clip for quick
3 cc C-Tec™ Syringe Shield: Item #4300-0031 syringe release. The shield is constructed of acrylic and the
5 cc C-Tec™ Syringe Shield: Item #4300-0032 exterior is encased with a thin layer of lead to shield
10 cc C-Tec™ Syringe Shield: Item #4300-0033 Bremsstrahlung.
The Beta Plus comes in 5cc and 10cc models.
Pin-Tec™ Syringe Shield
Features
Capintec's PIN-TEC syringe shield incorporates the most
popular design in • Designed for pure beta emitters
syringe shields today. • 1 cm acrylic with 0.2 cm lead casing
It is built to • Light weight and easy to handle
withstand the rigors Pin-Tec ßETA + Syringe Shield (10 cc): Item #4300-1057
of daily use by using Pic-Tec ßETA + Syringe Shield (5 cc): Item #4300-1058
a unique pin-action
that grips the syringe
and prevents it from inadvertently backing out or twisting
in the shield. Capintec's unique bright yellow florescent
gloss reflects light better, which brightens the view of the

7 Vreeland Road, Florham Park, NJ 07932 • PH: 201.825.9500 or 800.631.3826 • WEB: www.capintec.com


Click to View FlipBook Version