Fusion 360 Lesson 4

A review of the lever design shows that the lever cannot rotate due to interference with
the clamp screw.

4. In the browser, turn off the visibility of all bodies except for the lever.

5. In the Construction folder, turn on the visibility of the second plane. It should be the
midplane as shown.

6. On the Sketch panel, click Create Sketch. 151 | P a g e

Autodesk Design Academy
academy.autodesk.com

7. Select the midplane.

Autodesk Design Academy 152 | P a g e
academy.autodesk.com

8. In the browser, in the Sketches folder, right-click the last sketch in the list, then click
Slice Sketch.

9. On the Sketch panel, click Project / Include > Project.
10. Select the three faces as shown. You will have to rotate the part to select the third face.

11. Click OK. 153 | P a g e

Autodesk Design Academy
academy.autodesk.com

12. On the ViewCube, click Top, then zoom into the part as shown.
13. On the Sketch panel, click Line.
14. Draw a line in the approximate location as shown.
15. On the Sketch panel, click Sketch Dimension.

Autodesk Design Academy 154 | P a g e
academy.autodesk.com

16. Add a 65 degree dimension as shown.

17. Add a 7.5 mm aligned dimension as shown.

18. On the ViewCube, click Home.
19. In the graphics window, right-click, then click Press Pull.
20. Select the profile.

Autodesk Design Academy 155 | P a g e
academy.autodesk.com

21. In the Extrude dialog box:
a. From the Direction list, select Symmetric.
b. From the Operation list, select Cut.
c. For Distance, enter 3.35.

22. Click OK.
23. In the browser, turn on the visibility of all the bodies.
24. Save the file.

Autodesk Design Academy 156 | P a g e
academy.autodesk.com

Exercise: Collaborate with Other Designers
The steering clamp assembly is now completed and you want share the design with other
members of the design team.
Fusion 360 brings design teams together for collaborative product development. You can
manage the design process and collaborate with your team, clients, and partners by sharing
and reviewing designs, managing versions, and reusing designs.
Objectives:

• Invite other people
• Start a live review session
• Share a Public Link
Step 1: Invite Other People
1. The steering clamp design should be open.

2. Click Show Data Panel.

3. Click People.

4. Enter the email address of the person you want to invite to the project, then click Invite.

Autodesk Design Academy 157 | P a g e
academy.autodesk.com

5. The name of the person is added to the list. The person added to the list now has
access to the project.

6. When the people you have invited access the project, they can add comments in Fusion
360 or A360 (as shown) or reply to comments posted by yourself as shown.

Step 2: Start a Live Review Session
1. Click File > Live Review Session.

Autodesk Design Academy 158 | P a g e
academy.autodesk.com

2. Review the dialog box.

3. Click Stop, then click End Session.
Step 3: Share a Public Link

1. Click File > Share > Share Public Link.

Autodesk Design Academy 159 | P a g e
academy.autodesk.com

2. Review the Share Public Link dialog.

3. Review the dialog box. There are three toggles, setting sharing on, allow downloading,
and requiring a password.

4. Close the dialog box.

Autodesk Design Academy 160 | P a g e
academy.autodesk.com