Makita Cleaning Catalog

4
6 27







NOZZLE ASSEMBLY
FOR RUG & CARPET
122291-4

FOR FLOOR 123485-4
IVORY: 123488-8
BLUE: 123486-2
WHITE:

DX NOZZLE
FOR FLOORING / CARPET
IVORY: 198150-4
BLUE: 198523-1
WHITE: 198525-7

DX NOZZLE (WITH SWITCH)
FOR FLOORING / CARPET
WHITE: 198183-9





BLUE: NOZZLE ASSEMBLY
FOR FLOOR
IVORY: 123485-4
BLUE: 123488-8
WHITE: 123486-2

FOR RUG & CARPET
122291-4

DX NOZZLE
FOR FLOORING / CARPET
IVORY: 198150-4
BLUE: 198523-1
WHITE: 198525-7

DX NOZZLE (WITH SWITCH)
FOR FLOORING / CARPET
WHITE: 198183-9





Constantly Strong Suction

Automatic self- cleaning filtering system equipped with 3 stage
filtering structure (Prefilter, Damper and Powder Filter)

VCL3210LX1

When the power is When the power is switched Powder filter
switched on, Prefilter off, Damper expands back to
shrinks by itself to its original size and shakes Damper
compress Damper, and off dust from Prefilter Pre filter
fits closely over Damper automatically with its
and Powder filter expanding power

Allows for:
• Constantly high suction power
• Easy filter cleaning simply by tapping dust of Prefilter
• Quiet cleaning beacuse damper and prefilter make no noise

DVC860L: CORDLESS & CORDED HYBRID CLEANER
(Wet & Dry)

maneuverability anywhere you need cleaning

DVC860L is operated by both AC mains power and DC Li-Ion batteries,
using the twin 18V battery system that is storming the construction and
outdoor power tool market with its 36V performance. This will be
convenient in a location where AC power is not available.

Specification AC : 320W / DC : 25-70W
AC : 3.6m³ / min / DC : 2.1m³ / min
Suction power AC : 24kPa / DC : 9kPa
Max peak air flow Dust : 8L / Water 6L
Max sealed suction 65min. (with 5.0Ah batteries BL1850B x 2)
Tank capacity 366x334x368mm
Continuous use (minutes) 9.3kg
Dimensions (L x W x H) 5.0m
Net weight
Power supply cord

Standard Equipments: Floor Nozzle, Straight pipe, Bent Pipe, 38mm dia Hose 2.5m length with fixed cuff 38mm, Hose band,
Filter bag

VARIANTS BATTERIES / PCS CHARGER CARRY CASE Double Insulation Variable Speed

DVC860LZ 0 No No

DCHigh Maneuverability Caster stopper Large on-off switch
Convenient cord
70Suction power wrap Allows for easy on/off
W switching.
Max air flow Functions only when
2.1m2/min main power switch is on
Max sealed to prevent accidental
suction switch-on during
9.0 kPa transportation, etc.

ACHigh Power Variable suction
power control by
dial

Removable storage
box

Dual battery
fuel gauge

320Suction power Max air flow Max sealed On-tool pipe storage
W suction
3.6 m 2/min
24.0 kPa

Note: if the batteries are in place and at the same time the mains cord is connected and power available, the mainspower takes priority and an indicator
lamp shows when AC power is operating.

VC3210LX1 / DVC860L CLEANING ACCESSORIES

BEND PIPE < < < VC3210LX1 / VCL3210LX1
192562-3 DVC860L DVC860L
STRAIGHT
PIPE with 38mm dia Hose
2.5m with cuff 38
192563-1 195434-1
(STANDARD

< ACCESSORIES)

< JOINT 22-38
< 195548-6

<

ROUND CORNER grey_ NOZZLE NOZZLE DX NOZZLE ANCHOR
BRUSH NOZZLE ivory ASSEMBLY ASSEMBLY FOR FLOOR NOZZLE
191657-9 410306-2 Universal 195549-4 (DRY) / CARPET 192236-6
411891-8 DRY / WET 195550-9 (WET) (WITH
A-47846 (WIDE) SWITCH)
195551-7 198184-7

OPTIONAL HOSE FILTERS / DUST BAGS

38mm Hose dia - 5m with cuff 38 - 195435-9 TYPE FOR MODEL PCS PART NO
Filter bag set DVC860L 5pcs 195558-3
CLEANING SET Filter bag set VC3210LX1 5pcs 195557-5
Poly bag set DVC860L 10pcs 195432-5
195439-1 Poly bag set VC3210LX1 10pcs 195440-6
Straight pipe,
Bend pipe, TYPE FOR MODEL PCS PART NO
Nozzle assembly, Poly bag set DVC860L 10pcs 195432-5
Corner nozzle, Poly bag set VC3210LX1 10pcs 195440-6
38mm Hose - 2.5m with cuff 38mm
TYPE FOR MODEL PART NO
HOSE STAND
Pre filter DVC860L 195553-3
197323-6 195612-3
Pre filter VC3210LX1 140248-3
HOSE SET 10-33 195555-9
Cloth filter DVC860L 195611-5
195544-4
Filter set (water) DVC860L

Filter set (water) VC3210LX1

TYPE FOR MODEL PART NO

Powder filter(dry) DVC860L 197166-6

Powder filter(dry) VC3210LX1 195441-4

Damper Set VC3210LX1 195552-5
DVC860L

DVC260X: CORDLESS BACKPAC VACUUM CLEANER

For dust collection with power tools

HEPA Filter Comfortable harness

is used as the main

filter to capture very

fine particles effective-

ly

Exhaust air is as
clean as that of air
cleaner

2L large dust bag capacity• Featuring shoulder and waist belts
adjustable to suit user’s size for less
The capacity is larger than our fatigue even after long continuous
handy cleaners, reducing operation
replacement frequency to
enable continuous cleaning Controller
work
OFF switch
Standard Equipments:
Large 28mm dia Hose (1.5m) with Variable Speed
the below front cuffs
High/ Low power selection
ON-OFF switch
for LED job light

Front cuff 38 Front cuff 22 Front cuff 24 LED job light

Front cuffs helps hose to connect with the different types power tools convenient for
with or without dust attachments operation in dark job
sites

DVC260X can be used with most of the power tools to extract the dust and will be more convenient with the cordless power tools and light duty AC power tools.

Specification 1.3m³ / min
6.2kPa
Max peak air flow 2.0L
Max sealed suction High: 60min. / Low: 90min. (with 5.0Ah battery BL1850B x 2)
Recoverable capacity 230x152x373mm
Continuous use (minutes) 3.9kg
Dimensions (L x W x H)
Net weight

Standard Equipments: 28mm dia 1.5m long hose, front cuff 38, 22, 24

VARIANTS BATTERIES / PCS CHARGER CARRY CASE Electronic 2-Speed Revolving Hose
Static Free Hose Built-in job Light
DVC260ZX 0 No No

FILTERS / DUST BAGS

Type Pcs Part no. Type Part no. Type Part no.
Paper dust bag 10pcs 197782-4 Cloth dust bag 197898-5
Filter set assembly 123636-9

Makita offers a range of industry leading dust extractors and
the relevant consumable accessories

COMPLETE
DUST FREE
SOLUTION

System Chart

A: VC3210LX1 B: DVC860L C: DVC260X FRONT CUFFS JOINT

38 22 24 22-38
Dia 22mm
Dia 38mm Dia 22mm Dia 24mm
>
> > >
>> >
Standard Standard Standard > >
equipments equipments: equipments:
38mm dia hose with 38mm dia hose with 28mm dia hose with >> >
fixed cuff 38. fixed cuff 38 attachable front cuff > > >
28mm dia hose with 22 and 38. >
attachable front cuff Note: Joint 22-38 Rubber front cuff Thread type: Thread type: Rubber Type
22 and 38. can convert the front 24. Fit with Fit with 28mm can fix with Fit with
Rubber front cuff 24 cuff from 38 to 22 38 & 22mm front cuff 38
28mm Hose Hose
cuffs Part No
Part No Part No 195548-6
195545-2 195547-8 Part No
195546-0

Hose Type a: Removable: front cuff can be removed and interchangeble with 22 and 38 front cuffs type a type b
Type b: Front cuff is fixed with hose and cannot be removed

Hose length Hose Dia With Type Recommended for Part No Standard Equipments for
(m) Front Cuffs Vacuum Cleaners 152992-0 Vacuum Cleaners
A-34235 DVC260X
1.5m 28mm 38 a DVC260X 195434-1
195437-5 VC3210LX1, DVC860L
1.5m 28mm 22, 38 a VC3210LX1, DVC860L, DVC260X 195433-3
VC3210LX1
2.5m 38mm 38 b VC3210LX1, DVC860L
2.5m 28mm 22, 24, 38 a VC3210LX1, DVC860L, DVC260X
3.5m 28mm 22, 24, 38 a VC3210LX1, DVC860L, DVC260X

POWER TOOLS SUCTION DEVICE EXTRACTION UNITS WITH HOSE & CUFFS

Rotary / Demolition Hammer Dust extractor
(with Hammering mode only) attachment set
SDS-Max Hammers: 196568-3 (w/o hose)
HR3540C/41FC, HR4030C,
HR4001C/02//11C, AB C
HR4501C//11C, HM0870C/71C,
HM1101C/11C,
HM1203C/13C, HM1214C,
• Bull points with over 280mm Length
• Cold chisels with over 280mm
Length
• Scaling chisels (for tile)
• Bushing tool
• Scaling chisels length

17mm Hex Hammers:
HR3540C, HR4030C
• Bull points with over 280mm Length
• Cold chisels with over 280mm
Length

Electric Breaker Vacuum attachment set ø28mm hose can be directly connected to
HM1304, HM1306, HM1317C, 197168-2 (w/o hose) the suction device without front cuff
HM1307C, 197148-8 (w/ hose)
HM1810,HM1801, HM1812,
HM1802

38 Front cuff 38 22 Front cuff 22 38 Fixed front cuff 38 22-38 Joint
(used with 28mm dia hose) (used with 28mm dia hose) (comes with 38mm dia Hose)

POWER TOOLS SUCTION DEVICE EXTRACTION UNITS WITH HOSE & CUFFS
Rotary / Combi Hammer Dust cup set
DHR242, HR2600, HR2630/T/F, 195179-1
HR2361FT

Rotary / Combi Hammer Dust Extractor
DHR202, HR2470 & HR28 & HR26 series 193472-7

Rotary Hammer Dust Extractor
HR2010 192176-8

AB C

Rotary Hammer (Max. Bit Diameter 40mm) Vacuum attachment
HR4011C, HR4001C HR4511C/01C, 195866-2
HR4002

HR4013C, HR4003C 196536-6

HR5212C, HR5202C 196858-4 22 38 + 22-38 22

OR

Dust collecting wheel 22
guard
Angle Grinder 192212-0
N9500N, 9500NB

Rubber sleeve
192202-3

Angle Grinder Dust collecting wheel
guard
For 115, 125mm 192618-2
For 100mm 192475-8

38 Front cuff 38 22 Front cuff 22 38 Fixed front cuff 38 22-38 Joint
(used with 28mm dia hose) (used with 28mm dia hose) (comes with 38mm dia Hose)

POWER TOOLS SUCTION DEVICE EXTRACTION UNITS WITH HOSE & CUFFS
Angle Grinder
For 115, 125mm Dust collecting wheel
guard
For cup type diamond wheel
195250-1

Angle Grinder Dust collecting wheel
For 115, 125mm guard

for the grinder with 3 notches on bearing box 196846-1
for the grinder with 1 notch on bearing box 196845-3

Angle Grinder Dust collecting wheel
guard

Angle Cutter For 115, 125mm 193794-5 AB C
4112HS For 180mm 194303-3
Dustless Cutter For 230mm 194044-1 38 38 38
4105KB
Wall Chaser Elbow joint 32
SG1251, SG1250 192613-2

Directly connected

Concrete Planer Directly connected
PC5000C, PC5001C
Joint
Belt Sander 192518-6
9924DB Directly connected
Belt Sander
9403, 9404, 9910, Joint
9920, 9921 410899-9
Wheel Sander
9741

38 Front cuff 38 22 Front cuff 22 38 Fixed front cuff 38 24 Rubber front cuff 24 22-38 Joint
(used with 28mm dia hose) (used with 28mm dia hose) (comes with 38mm dia Hose)

POWER TOOLS SUCTION DEVICE EXTRACTION UNITS WITH HOSE & CUFFS
Belt Sander Dust nozzle
9032 122652-8

Belt Sander Directly connected
9031
AB C

Finishing Sander Directly connected 22 38 + 22-38 22
9046, BO3700, Directly connected
BO3710 BO4900, OR
BO4901, BO4555
BO4556, BO4565, 22
BO4566
Random Orbit Sander
BO5030, BO5041
BO6030 BO6040,
DBO180

POWER TOOLS SUCTION DEVICE EXTRACTION UNITS WITH HOSE & CUFFS
Random Orbit Sander
BO6050 24 AB C
24
Aluminum Groove Cutter 24 38 or 22 38 or 22 38 or 22
CA5000XJ

Plunge cut circular saw
SP6000

Circular Saw Joint (Dust nozzle)
DHS680 196952-2

+

24

38 Front cuff 38 22 Front cuff 22 38 Fixed front cuff 38 24 Rubber front cuff 24 22-38 Joint
(used with 28mm dia hose) (used with 28mm dia hose) (comes with 38mm dia Hose)

POWER TOOLS SUCTION DEVICE EXTRACTION UNITS WITH HOSE & CUFFS
Circular Saw Joint (Nozzle)
5704R 192420-3 AB C
N9500N 193068-4

POWER TOOLS SUCTION DEVICE 38 38 38
Circular Saw Joint
HS301D 452237-9 EXTRACTION UNITS WITH HOSE & CUFFS

Plate Joiner Directly connected AB C
PJ7000, 3901 Directly connected
Jig Saw Dust nozzle 22 38 + 22-38 22
JV100D, JV101D 417853-4
4326, 4327, 4328, Directly connected OR
4329
Jig Saw 22
DJV180,
4350CT/FCT,
4351FCT
Drywall Cutter
DSD180

Cut-out-Tool Dust collecting cover
3706 193449-2

Multi Tool Dust attachment
196022-7
TM3000C 196550-2
TM3010CK 196765-1

DTM51

38 Front cuff 38 22 Front cuff 22 38 Fixed front cuff 38 24 Rubber front cuff 24 22-38 Joint
(used with 28mm dia hose) (used with 28mm dia hose) (comes with 38mm dia Hose)

POWER TOOLS SUCTION DEVICE EXTRACTION UNITS WITH HOSE & CUFFS

Router Nozzle
194934-8
RP1800/F, RP2300FC
RP0900, RT0700C 194733-8

for RT0700C:
Use with plunge base assembly

Trimmer Nozzle
RT0700C 195559-1

Power Planer Nozzle
DKP180 451329-1

AB C

Power Planer Nozzle
1911B 192082-7

Power Planer Nozzle + Joint 38 38

Power Planer 1805N JPA122277 (nozzle)+ Makita recommends to use 38mm dia hose
KP0810 181575-9 (joint) when using router, trimmer and planer

N1900B, N1923B 181572-5 (nozzle)+ C DVC260X - Backpack Vacuum Cleaner
JPA122275 (joint) Cannot be used with Router, Trimmer or Planer

KP0800XK 451329-1(nozzle) +
416368-8 (elbow)

Directly connected

Table Saw MLT100 Joint
2703
Band Saw 2704 JM27000090
LB1200F 192799-2
2712 419093-0
Directly connected

Duat point
JM27000090

38 Front cuff 38 22 Front cuff 22 38 Fixed front cuff 38 24 Rubber front cuff 24 22-38 Joint
(used with 28mm dia hose) (used with 28mm dia hose) (comes with 38mm dia Hose)

POWER TOOLS SUCTION DEVICE EXTRACTION UNITS WITH HOSE & CUFFS
Directly connected
Slide Compound Saw / AB C
Miter Saw Directly connected
LS0714, LS1016, LS1216,
DLS714, DLS713 38 38 38
LS1018L, LS0815FL
/ LS1440, LS1040

Table Top Miter Saw
LH1201FL, LH1040

Flip Over Saw
LF1000

38 Front cuff 38 22 Front cuff 22 38 Fixed front cuff 38 24 Rubber front cuff 24 22-38 Joint
(used with 28mm dia hose) (used with 28mm dia hose) (comes with 38mm dia Hose)

DX01: Dust Extraction System (Part no: 195897-1)

Can be attached to Cordless Combination Hammer DHR242

DX01 (for DHR242) Dust Extraction Inlet

interlocked with Adjustable according to bit length
this system. simply by pushing a single push
button

HEPA Filter

Built-in DC motor Dust Box

is for exclusive use of Dust extraction Large capacity dust box
system, and accordingly does not affect the can contain more than the total amount
drilling performance. of dust to be produced through
operation on a single full battery charge.
Depth gauge
adjustable for Large dust box cover can be opened
desired drilling simply by pushing a single push
depth button for easy dust cleaning.

One-touch easy
attachment/
removal from
the machine

Transparent dust box for easy
checking of collected dust amount